View
6
Download
0
Category
Preview:
Citation preview
558OUTLETS NATIONWIDE
Hitachi Power Tools
Spares & Accessories
Hit
ach
i P
ow
er T
ools
, S
pa
res &
Accessorie
s
Quick-find Index
Power Tools Spares & AccessoriesQuality Control
Under a stringent quality control programme,
Hitachi Power Tools are without exception
subjected to rigid inspections and tests at
each stage of manufacture. Each part is
meticulously scrutinised for flaws by expert
Cordless Range
560-561
559
Cordless Accessories
561
Drilling
562-565
Rotary Hammer Drills
565-567
Breakers & ChippingHammers
568
Demolition Hammers
569
Angle Grinders &Polishers
570-573
Die Grinders
574
Shears & Nibblers
575
inspectors. Components are thoroughly
tested at assembly lines to ensure optimum
performance, and each finished product is
carefully examined to ensure uniform quality.
The primary concern of Hitachi Power Tools
Product Warranty
is the convenience and satisfaction of the
customer. To this end, each Hitachi Power
Tool is carefully tested and inspected, and
offer a one year guarantee against any
defects in workmanship and materials.
Hit
ach
i P
ow
er T
ools
,
Sp
ares &
Accessorie
s
Circular Saws
575-576
Jig Saws
577-578
Reciprocating Saws
578
Routers
578-579
Planers
580
Orbital Sanders
581-582
Belt Sanders
582
Screwdrivers
583
Impact Wrenches
584
Blower
584
Cut-off Machine
585
Mitre Saws
585
Magnetic Base Drills
586-587
Core Drill Grinder
587
Beveling Machines
588
Steel Circular Saw
588
Core Drill Cutters
589
Accessories
590
Carbon Brush SelectionChart
591
Hit
ach
i P
ow
er T
ools
,
Sp
ares &
Accessorie
s
560Cordless Range
Specifications:
Drill ChuckCapacity: Mild Steel
Soft WoodWood Screw(DxL)Machine Screw
Battery VoltageNo Load Speed: High
LowMaximum Torque in LockTorque Setting and ClutchOverall LengthWeightStandard Accessories
DRIVER DRILL - 2 SPEED - VAR/REVHTC-DS9DVF3 10mm - 9,6V
0.8 - 10mm (1/32 - 3/8") Keyless10mm (3/8")21mm (13/32")5.8mm x 45mm(#12 x 1-25/32")6mm (1/4")9.6V0 – 840/min.0 – 280/min.22Nm (195 in.-lbs.)1- 6Nm (9-52in.-lbs.)198mm (7-3/4")1.4kg (3.1 lbs.)2 Batteries (EB914S), Charger (UC18YG),Driver Bit, Carry Case, Torchlight & Bit Set
* Soft grip handle* Max torque in lock: 22Nm (195in.-lbs.)* Fan-cooled motor with 2-speed gear* 10mm keyless chuck* Capacity for mild steel: 10mm
* Adjustable clutch: 22-stage torque* Adjustable hook with bit holder* 2 x 1.4Ah batteries EB914S with 30-min.
charger UC18YG* Supplied with torchlight UB12D and bit set
Specifications:
Drill ChuckCapacity: Mild Steel
Soft WoodWood Screw(DxL)Machine Screw
Battery VoltageNo Load Speed: High
LowTorque SettingOverall LengthWeightStandard Accessories
0.8 -10mm (1/32 - 3/8") Keyless12mm (15/32")25mm (1")5.8 x 63mm(#12 x 2-1/2")6mm (1/4")12V0 – 1,050/min.0 – 350/min.1-6 Nm (9-52 in.-lbs.)221mm (8-3/4")1.5kg (3.3 lbs.)2 Batteries (EB1214S), Charger (UC18YG),Driver Bit, Carry Case, Torchlight & Bit Set
* Soft grip handle* Max torque in lock: 26Nm (230in.-lbs.)* Fan-cooled motor with 2-speed gear* 10mm keyless chuck* Capacity for mild steel: 12mm
* Adjustable clutch: 22-stage torque* Adjustable hook with bit holder* 2 x 1.4Ah batteries EB1214S with 30-min.
charger UC18YG* Supplied with torchlight UB12D and bit set
DRIVER DRILL - 2 SPEED - VAR/REVHTC-DS12DVF3 12mm - 12V
HTC-DS12DVF3includes UB12D
Torchlight
9.6v
12v
HTC-DS9DVF3includes UB12D
Torchlight
VariableSpeed
With CarryingCase
ReversibleElectronicBrake
Battery Voltage& Amp Rating
TwoSpeed
Eco-Product
Specifications:
*36V, 2.6Ah capacity Lithium-ion batteryBSL3626
* 80 minute charger UC36YRL* 2 mode power: Save mode to prevent
bending of small bits and Power modefor large bits
* 2 mode action: Drilling only and hammerdrilling
* Lightweight 3.9kg* Compact 322mm long
* Fan cooled, durable motor with replaceable carbonbrushes
* Soft grip handle* Fastest drilling speed in its class
Capacity: ConcreteMild Steel
Bit ShankVoltageNo Load SpeedImpact RateWeightOverall LengthStandard Accessories
26mm (1")13mm (1/2")SDS-plus36V0 - 550/min. 0 - 1,100/min.0 - 2,250/min. 0 - 4,500/min.3.9kg (8.6lbs)322mm (12-11/16")Battery (BSL3626), Charger (UC36YRL), Side Handle, Depth Gauge, Carry Case
ROTARY HAMMER 2 SPEED (2 ACTION MODE)HTC-DH36DL SDS+ - 36V
2.6 Ah
36 V
36v
Hit
ach
i P
ow
er T
ools
,
Sp
ares &
Accessorie
s
561 Cordless Range & Cordless Accessories
VariableSpeed
With CarryingCase
ReversibleElectronicBrake
Battery Voltage& Amp Rating
TwoSpeed
Eco-Product
* 36V, 2.6Ah capacity Lithium-ion batteryBSL3626
* 80 minute charger UC36YRL* 2 mode power: Save mode to prevent
bending of small bits and Power mode forlarge bits
* 3 mode action: Drilling only, hammer drillingand hammering only
* Lightweight 4.0kg
* Compact 322mm long* Fan cooled, durable motor with replaceable carbon
brushes* Fastest drilling speed in its class
ROTARY HAMMER 2 SPEED (3 ACTION MODE)HTC-DH36DAL SDS+ - 36V
2.6 Ah
36 V
Specifications:
Capacity: ConcreteMild Steel
Bit ShankVoltageNo Load SpeedImpact RateWeightOverall LengthStandard Accessories
26mm (1")13mm (1/2")SDS-plus36V0 - 550/min. 0 - 1,100/min.0 - 2,250/min. 0 - 4,500/min.4.0kg (8.8lbs)322mm (12-11/16")Battery (BSL3626), Charger (UC36YRL), Side Handle, Depth Gauge, Carry Case
BATTERY & CHARGER COMBINATION TABLE
12V
Voltage
Battery
Type Capacity
WorkCapacity
FEB9EB914EB924EB12H**EB1214L*EB1230H**
* Nickel Battery ** Nickel-Metal Hydride Battery
1.3Ah1.4Ah2.4Ah2.2Ah1.4Ah3.0Ah
12.5Wh13.4Wh23.0Wh26.4Wh16.8Wh36.0Wh
Charger
HTC-UC18YRL HTC-UC24YFB HTC-UC24YFA
18 min.20 min.35 min.35 min.20 min.45 min.
------
35 min.40 min.60 min.55 min.40 min.70 min.
For Model
9.6V DS9DVF3
DS12DVF3, DV12DV, WH12DM2, WH12DMR,WR12DM2, WR12DMR, UB12D, UB12DL
CHARGER
* Suitable for Lithium-ion, Super Nickel-Metal Hydride, Nickel-MatelHydride and Nickel-Cadmium
* Features cooling fan and rapid charging
HTC-UC18YRL 7.2 -18V
Specifications:
Charging VoltageBattery:Type
Assortment
Fan Cooling
7.2 - 18VCassetteLithium-ion, SuperNickel-MetalHydride, Nickel-Metal Hydride andNickel-CadmiumYes
* Suitable for 25.2 - 36V Lithium-ion slide batteries* Features cooling fan for longer service life and rapid charging
HTC-UC36YRL 25.2 - 36V
Specifications:
Charging VoltageBattery: Type
AssortmentFan Cooling
25.2 - 36VSlideLithium-ionYes
CASSETTE LITHIUM-ION BATTERIES
* 36V, 2.6Ah capacity Lithium-ion battery* Side type cooling windows* Suits charger UC36YRL
HTC-BSL3626
36v
36V - 2.6Ah
36v
CHARGER
Hit
ach
i P
ow
er T
ools
,
Sp
ares &
Accessorie
s
562Drilling
VariableSpeed
With CarryingCase
ReversibleDoubleInsulation
Electronic VariableSpeed Control
EL
EC
TRO
NIC Electronic Soft
Start ControlShock AbsorbingHandle
Specifications:
* Convenient reversing switch* Easy to control, spade shaped handle
Chuck CapacityCapacity: Steel
WoodPower InputNo Load SpeedOverall LengthWeightStandard Accessories
1.5 - 13mm (1/16"-1/2")13mm (1/2")40mm (1-5/8")720W550/min.378mm (14-7/8")3.0kg (6.6 lbs.)Chuck Wrench, Side Handle
Specifications:
* Compact, just 238mm in length* Chuck offset only 26mm* Variable speed dial trigger
* Cylindrical housing* Lightweight - only 1.3kg* Power input 460W
Drill Chuck Capacity:Capacity: Steel
WoodPower InputNo Load SpeedOverall LengthWeightStandard Accessories
1.0 - 10mm (1/32-3/8")10mm (3/8")25mm (1")460W0-2.300/min238mm (9-3/8")1.3kg (2.9 lbs)Chuck Wrench
Specifications:
* Compact, well balanced design* Fast drilling speed* Stopper can be installed on both sides
Chuck CapacityCapacity: Steel
WoodPower InputNo Load SpeedOverall LengthWeightStandard Accessories
0.5 - 6.5mm6.5mm (1/4")9mm (3/8")240W4,500/min206mm (8-1/8")0.9kg (2.0 lbs)Chuck Wrench, Hook
HTC-D10VC2 10mm - 460W
HTC-D6SH 6.5mm - 240W
Specifications:
* Max torque 16Nm (139in.-lbs)* Keyless chuck* Large, variable speed trigger
* Attractive, ergonomic design* Soft grip handle* Heavy duty, metal gear housing
Chuck CapacityCapacity: Chuck
Steel Twist BitWood Flat BitHole Saw
Power InputNo Load SpeedOverall LengthWeightStandard Accessories
0.8 - 10mm (1/32 - 3/8")
10mm (3/8")25mm (1")29mm (1-1/8")710W0-3,000/min265mm (10-7/16")1.8kg (4.0 lbs)Chuck Wrench
HTC-D10VF 10mm - 710W
HTC-D13 13mm - 720W
DRILL
DRILL - VAR/REV
DRILL - VAR/REV
DRILL - REV
Hit
ach
i P
ow
er T
ools
,
Sp
ares &
Accessorie
s
563 Drilling
IMPACT DRILL
VariableSpeed
With CarryingCase
ReversibleDoubleInsulation
Electronic VariableSpeed Control
EL
EC
TRO
NIC Electronic Soft
Start ControlShock AbsorbingHandle
HTC-DV13SS 13mm - 550W
Specifications:
* Power input 550W* Cylindrical housing for durability* Offset of chuck: 28mm
Capacity: ChuckConcreteSteelWood
Power InputNo Load SpeedImpact RateOverall LengthWeightStandard Accessories
1.5-13 mm (1/16-1/2") Keyed13mm (1/2")13 mm (1/2")20mm (3/4")550W2,900/min.29,000/min.270mm (10-19/32")1.4kg (3.1 lbs.)Chuck Wrench
IMPACT DRILL - VAR/REV - KEYLESS CHUCKHTC-DV13VSS 13mm - 550W
Specifications:
* Variable speed by trigger* Reversible by lever switch* Keyed chuck or keyless chuck available by areas* Other features same as for model DV13SS
Capacity: ChuckConcreteSteelWood
Power InputNo Load SpeedImpact RateOverall LengthWeightStandard Accessories
1.5-13mm (1/16-1/2") Keyless13mm (1/2")13 mm (1/2")20mm (3/4")550W0-2,900/min.29,000/min.270mm (10-19/32")1.4kg (3.1 lbs.)-
IMPACT DRILLHTC-DV16SS 13mm - 600W
Specifications:
* Power input 600W* Cylindrical housing for durability* Offset of chuck: 28mm
Capacity: ChuckConcreteSteelWood
Power InputNo Load SpeedImpact RateOverall LengthWeightStandard Accessories
1.5-16 mm (1/16-5/8")16mm (5/8")13mm (1/2")25mm (1 ")600W2900/min.29000/min.270mm (10-19/32")1.5kg (3.3 lbs.)Chuck Wrench, Side Handle, Depth Guage
Hit
ach
i P
ow
er T
ools
,
Sp
ares &
Accessorie
s
564Drilling
VariableSpeed
With CarryingCase
ReversibleElectronic VariableSpeed Control
EL
EC
TRO
NICDouble
InsulationKeyless DrillingChuck
IMPACT DRILL - VAR/REV - KEYLESS CHUCK
IMPACT DRILL - 2 SPEED VAR/REV
Specifications:
HTC-DV18V 13mm - 690W
* Fast drilling speed* Powerful motor input: 690W* Compact : 333mm in length* Lightweight: 2.0kg (4.4 lbs.)* Shortest chuck offset 23.5mm (15/16")* Soft grip handle* Two-finger sized trigger switch with speed dial
Drill Chuck Capacity:ConcreteSteelPower InputNo Load SpeedFull Load Impact RateOverall LengthWeightStandard Accessories
1.5 - 13mm (1 /1 6 - 1/2")High: 13mm (1/2") Low: 18mm (11/1 6")High: 8mm (5/16") Low: 13mm (1/2")690WHigh: 0-3000/min. Low: 0-1000/min.High: 27300/min. Low: 8400/min.333mm (13-1/8")2.0kg (4.4 lbs.)Side Handle, Depth Gauge, Chuck Wrench, Carry Case
Specifications:
* Variable speed by trigger* Reversible by lever switch* Keyed chuck or keyless chuck available by
areas* Other features same as for model
HTC-DV16SS
Drill ChuckCapacity: Concrete
SteelWood
Power InputNo Load SpeedFull Load Impact RateOverall LengthWeightStandard Accessories
1.5 - 16mm (1/16 - 5/8") Keyless16mm (5/8")13mm (1/2")25MM (1")600W0 - 2,900/min.29,000/min.270mm (10-19/32")1.5kg (3.3 lbs.)Side Handle, Depth Gauge, Carry Case,
HTC-DV16VSS 13mm - 600W
IMPACT DRILL - 2 SPEED VAR/REVHTC-DV20VB2 13mm - 790W
Specifications:
* Power Input: 790W* Capacity in concrete:
20mm* Compact : 333mm in
length* Lightweight: 2.2kg* Slip clutch
* Fast drilling speed* Shortest chuck offset 23.5mm
(15/16")* Soft grip handle* Two-finger sized trigger switch with
speed dial
Drill Chuck Capacity:ConcreteSteel
Power InputNo Load SpeedFull Load Impact RateOverall LengthWeightStandard Accessories
1.5 - 13mm (1/16 - 1/2")High: 13mm (1/2") Low: 20mm (3/4")High: 8mm (5/16") Low: 13mm(1/2")790WHigh: 0-3000/min. Low: 0-1000/min.High: 26000/min. Low: 8000/min.333 (13-1/8")2.2kg (4.9 Ibs.)Side Handle, Depth Gauge, Carry Case, Chuck Wrench
Hit
ach
i P
ow
er T
ools
,
Sp
ares &
Accessorie
s
565 Drilling/Rotary Hammer Drills
VariableSpeed
With CarryingCase
ReversibleDoubleInsulation
2 SpeedLOWHIGH Keyless Drilling
Chuck
IMPACT DRILL - 2 SPEED
Specifications:
HTC-VTP16A 16mm - 800W
LOWHIGH
* Powerful motor: 800W* Chuck capacity:16mm(5/8")* 2 selectable speeds
Drill Chuck Capacity:ConcreteSteelPower InputNo Load SpeedFull Load Impact RateOverall LengthWeightStandard Accessories
3.2 - 16mm (1/8 - 5/8")High: 16mm (5/8") Low: 35mm (1-3/8")High: 10mm (3/8") Low: 16mm (5/8")800WHigh: 1400/min. Low: 700/min.High: 20000/min. Low: 11200/min.443mm (17-7/1 6")3.8kg (8.4 lbs.)Chuck Wrench, Side Handle, Depth Stopper
ROTARY HAMMER DRILL (SDS-PLUS) 2 MODE VAR/REVHTC-DH22PG 22mm - 620W
Specifications:
Capacity: Concrete: Drill BitWoodMild Steel
Power InputBit ShankNo Load SpeedFull Load Impact Rate OverallLengthWeightStandard Accessories
22mm (7/8")24mm (15/16")13mm (1/2")620WSDS-plus0 - 1,500/min. for forward0 - 6,200/min.289mm (11-3/8")1.9kg (4.2 lbs.)Side Handle, Depth Gauge, Carry Case
* Most compact and lightweight in its class
* Internal pressure adjustment system
* No load hammering prevention mechanism (clutch cutting system)
* Full load speed 0 - 1,500/min. forward action
* Easy to install bit - single action
* Idle striking prevention mechanism
ROTARY HAMMER DRILL (SDS-PLUS) 2 MODE VAR/REV
Specifications:
Capacity: Concrete: Drill BitCore Bit
Mild SteelPower InputBit ShankNo Load SpeedFull Load Impact Rate OverallLengthWeightStandard Accessories
24mm (15/16")50mm (2")13mm (1/2")800WSDS-plus0 - 1,050/min.0 - 4,600/min.351mm (13-13/16")2.3kg (5.1 lbs.)Side Handle, Depth Gauge, Carry Case
* 2-mode action: hammer drilling and
drilling only
* Improved design (Ball bearings to
prevent grease leakage)
* Power input 800W
* Capacity for concrete: 24mm
* New powerful design
* Easy to install bit - single action
* Non-slip double-layer moulded handle and gear
cover
* Compact: Length 351mm
HTC-DH24PB3 24mm - 800W
Hit
ach
i P
ow
er T
ools
,
Sp
ares &
Accessorie
s
566Rotary Hammer Drills
VariableSpeed
With CarryingCase
ReversibleDoubleInsulation
2 SpeedLOWHIGH Keyless Drilling
Chuck
Eco-Product
ROTARY HAMMER DRILL (SDS-PLUS) 3 MODE VAR/REV
Specifications:
Specifications:
Capacity: Concrete: Drill BitCore Bit
Mild SteelWood
Power InputBit ShankNo Load SpeedFull Load Impact Rate OverallLengthWeightStandard Accessories
24mm (15/16")50mm (2")13mm (1/2")32mm ( 1 1/4")800WSDS-plus0 - 1,150/min.0 - 4,600/min.351mm (13-13/16")2.4kg (5.3 lbs.)Side Handle, Depth Gauge, Carry Case
* 3-mode action: hammer drilling, drilling only and
hammering only
* Other features same as for model DH24PB3
HTC-DH24PC3 24mm - 800W
HTC-DH28PC 28mm - 800W ROTARY HAMMER DRILL (SDS-PLUS) 3 MODE VAR/REV
ROTARY HAMMER - 3 MODE VARI-SPEED (SDS-PLUS)
Specifications:
* 3-mode action: hammer drilling, drilling only and hammering only
* Class-leading drilling-speed and demolishing performance
* Compact - 355mm and well balanced
* Soft grip handle
* Variable lock mechanism
Capacity: Concrete: Drill BitCore Bit
Mild SteelPower InputBit ShankNo Load SpeedFull Load Impact Rate OverallLengthWeightStandard Accessories
30mm (1-3/16")90mm (3-17/32")13mm (1/2")850WSDS-plus0 - 850/min.0 - 3,700/min.355mm (14")4.3kg (9.5 lbs.)Side Handle, Depth Stopper, Dust Cup, Syringe, Carry Case
HTC-DH30PC2 30-90mm - 850W
Capacity: Concrete: Drill Bit
Core Bit
Mild Steel
Power Input
Bit Shank
No Load Speed
Full Load Impact Rate
Overall Length
Weight
Standard Accessories
28mm (1-1/8")
80mm (3-5/32")
13mm (1/2")
720W
SDS-plus
0 - 1,050/min.
0 - 4,000/min.
316mm (12-7/16")
3.5kg (7.7 lbs.)
Side Handle, Depth Stropper, Carry Case
* For SDS-plus bit shank
* 3-mode action: hammer drilling, drilling only and
hammering only
* Overall length 316mm
* Soft grip handle
* Idle hammering prevention system for durability
Hit
ach
i P
ow
er T
ools
,
Sp
ares &
Accessorie
s
567 Rotary Hammer Drills
VariableSpeed
With CarryingCase
ReversibleDoubleInsulation
2 SpeedLOWHIGH Keyless Drilling
Chuck
Eco-Product
ROTARY HAMMER - 2 MODE ACTION VARI-SPEED (SDS-MAX)
ROTARY HAMMER - 2 MODE ACTION VARI-SPEED (SDS-MAX)HTC-DH45MR 25,0J - 1200W
Specifications:
Capacity: Concrete Drill BitCore Bit
Power InputBit ShankNo Load SpeedFull Load Impact RateOverall LengthWeightStandard Accessories
45mm (1-3/4")125mm (4-29/32")1,200WSDS-Max120 - 140/min.1,200 - 2,500/min.500mm (19-11/16")8.0kg (17.6lbs)Side Handle, Depth Stopper, Grease Pack, Wrenches, Carry Case
* 2 mode action: Hammer drilling and
hammering only
* Fast Drilling
* Constant speed control with variable
speed
* Internal double insulation in a sturdy
aluminium frame
* Soft grip handle plus side handle
* SDS Max shank and variable lock mechanism for
12 different chisel angle positions
Specifications:
Specifications:
Capacity: Concrete: Drill BitCore Bit
Power InputBit ShankNo Load SpeedFull Load Impact Rate OverallLengthWeightStandard Accessories
40mm (1-9/16")105mm (4-1/8")950WSDS-Max240 - 480/min.1,320 - 2,650/min.435mm (17-1/8")6.5kg (14.3 lbs.)Side Handle, Depth Stopper, Grease Pack, Wrenches, Carry Case
* SDS Max shank with variable lock mechanism for 12-
angle chisel positions
* Constant speed control with variable speed
* 2-mode action: hammer drilling and hammering only
* A winner of the IF Design Award, 2004
HTC-DH40MR 40-105mm - 950W
EL
EC
TRON
IC
EL
EC
TRON
IC 2004
ROTARY HAMMER - 2 MODE ACTION VARI-SPEED (SDS MAX)HTC-DH38MS 38-105mm - 950W
Capacity: Concrete: Drill BitCore Bit
Power InputBit ShankNo Load SpeedFull Load Impact Rate OverallLengthWeightStandard Accessories
38mm (1-1/2")105mm (4-1/8")950WSDS-Max620min.2,800min.433mm (17-1/16")6.4kg (14.1 lbs.)Side Handle,Carry Case
* For SDS-Max bit shank
* Functional & robust design
* 2-mode action: hammer drilling and hammering only
* Variable-lock mechanism for 12-angle tool positions
Hit
ach
i P
ow
er T
ools
,
Sp
ares &
Accessorie
s
568Breakers & Chipping Hammers
VariableSpeed
With CarryingCase
EL
EC
TRON
IC Electronic Constant
Speed ControlDoubleInsulation
Shock AbsorbingHandle
Eco-Product
CHIPPER (SDS MAX)
DEMOLITION HAMMER (SDS MAX)
HTC-H45MR 12,5J - 950W
HTC-H60MR 26J - 1350W
Specifications:
Power InputFull Load Impact RateBit ShankOverall LengthWeightStandard Accessories
950W3,000/min.SDS max454mm (17-7/8"")5.9kg (13.0 lbs.)Side Handle, Carry Case, Bull Point& Wrenches
* For SDS max bit
* Easy to change tool by means of a
single-step holder
* Variable lock mechanism to adjust the
tool at 12-step angles
* Reliable mechanism prevents idle
hammering for longer service life
Specifications:
Specifications:
Power InputFull Load Impact RateBit ShankOverall LengthWeightStandard Accessories
1,350W1,650/min.SDS Max576mm (22-43/64")10.5kg (23.1lbs)Carry Case, Side Handle, Wrench, Bull Point
* Durable aluminum housing
* Soft grip, shock-absorbing handle
* Injection-moulded carrying case
* Easy to change tool by means of a single-step holder
* Variable lock mechanism to adjust tool at 12-step angles
* Unique design
DEMOLITION HAMMER (SDS MAX)HTC-H60MC 22J - 1350W
Power Input
Full Load Impact Rate
Bit Shank
Overall Length
Weight
Standard Accessories
1,250W
1,600/min.
SDS Max
570mm (22-7/16")
10.2kg (22.5lbs)
Carry Case, Side Handle
* For SDS max bit shank
* Power input 1,250W
* Easy to change tool by means of a single-step holder
* Variable lock mechanism to adjust tool at 12-step angle
* Functional and robust design
* Sturdy aluminium body with double
insulated inner
* Less recoil (feels like self chiseling)
* Higher demolishing performance and
lower vibration and noise
Hit
ach
i P
ow
er T
ools
,
Sp
ares &
Accessorie
s
569 Demolition Hammers
DEMOLITION HAMMER - OIL BATH LUBRICATION 30MM HEX
WithCase
DoubleInsulation
Shock AbsorbingHandle
HTC-H65SC 39,5J - 1240W
Specifications:
* Strong demolition power
* Double insulation and sturdy aluminum frame
* Auto-stop carbon brush
Power InputFull Load Impact RateBit ShankOverall LengthWeightStandard Accessories
1,240W1,400/min.30mm Hex. (1-3/16")647mm (25-13/32")15.0kg (33.0lbs)Carry Case, Bull Point, Side Handle,Wrenches, Oil Feeder
Eco-Product
HTC-H65SB2 42,0J - 1340W
Specifications:
Power InputFull Load Impact RateBit ShankOverall LengthWeightStandard Accessories
1340W1400/min.30mm Hex. (1-3/1 6")726mm (28-19/32")16.5kg (36.4 lbs.)Carry Case, Bull Point, Side Handle, Wrenches
* For 30mm hex type* Strongest demolition performance in this class* Internal double-insulated construction with sturdy
aluminum frame* Soft grip and shock-abosorbing handle* Soft grip side handle* A winner of the IF Design Award, 2006
DEMOLITION HAMMER - 30MM HEX
Specifications:
Power InputFull Load Impact RateBit ShankOverall LengthWeightStandard Accessories
1240W1400/min.30mm Hex. (1-3-16")625mm (24-5/8")18.0kg (39.7 lbs.)Bull Point, Wrenches
* Most compact machine with T-handle to demolishdownward
* Reduced noise and vibration* Shock-absorbing handle* Dust proof double air vent construction* Internal double insulation
HTC-H70SA 42,0J - 1240W DEMOLITION HAMMER - 30MM HEX
Hit
ach
i P
ow
er T
ools
,
Sp
ares &
Accessorie
s
570Angle Grinders & Polishers
HTC-G12SR3 115mm - 730W ANGLE GRINDER
* Wheel dia 115mm
* Renewed larger cooling fan
* Powerful motor: input 730W and max. output 950W
* Most durable grinder in its class
* Compact: length 254mm
* Lightweight: 1.4kg
* Slide switch on side of the tool body
Specifications:
Capacity: Wheel Dia
Hole Dia
Spindle Thread
Power Input
No Load Speed
Overall Length
Weight
Standard Accessories
115mm (4-1/2")
22mm (7/8")
M14 x 2
730W
10000/min
254mm (10")
1.4kg (3.1 lbs.)
Side Handle, Wrench
ANGLE GRINDERHTC-G12SS 115mm - 580W
* Wheel dia 115mm
* Motor input 580W with max. output of 630W
* Excellent overload durability
* Compact length: 254mm and lightweight: 1.4kg
* Grinding wheel not supplied
Specifications:
Capacity: Wheel Dia
Hole Dia
Spindle Thread
Power Input
No Load Speed
Overall Length
Weight
Standard Accessories
115mm (4-1/2")
22mm (7/8")
M14 x 2
580W
11,000/min
254mm (10")
1.4kg (3.1 lbs.)
Wrench, Side Handle
* Wheel dia 115mm
* Input 800W
* Newly designed housing with powerful motor
* Improved dust sealing bearings
* Includes 2 position side handle
Specifications:
Capacity: Wheel Dia
Hole Dia
Spindle Thread
Power Input
No Load Speed
Overall Length
Weight
Standard Accessories
115mm (4-1/2")
22.23mm (7/8")
M14 x 2
800W
11,000/min
250mm (9-7/8")
1.6kg (3.5 lbs.)
Side Handle, Depressed Centre
Wheel, Wrench
DoubleInsulation
Eco-Product Spindle Lock
ANGLE GRINDERHTC-G12S2 115mm - 800W
Hit
ach
i P
ow
er T
ools
,
Sp
ares &
Accessorie
s
571 Angle Grinders & Polishers
DoubleInsulation
Eco-Product Spindle Lock
HTC-G12SE2 115mm - 1200W ANGLE GRINDER
Specifications:
* Powerful motor: Input 1200W and max power output
1900W
* Motor more durable for overload and wear resistance
* Convenient tool less wheel guard
* Easy-to-use paddle switch
Capacity: Wheel Dia
Hole Dia
Spindle Thread
Power Input
No Load Speed
Overall Length
Weight
Standard Accessories
115mm (4-1/2")
22.23mm (7/8")
M14 x 2
1,200W
11,000/min
321mm (12-5/8")
1.9kg (4.2 lbs.)
Side Handle, Depressed Centre Wheel,
Wrench
HTC-G13SS 125mm - 580W ANGLE GRINDER
Specifications:
* Wheel diameter 125mm
* Motor input 580W
* Max. output 630W
* Excellent overload durability
* Compact - length 254mm
* Lightweight - 1.4kg
Capacity: Wheel Dia
Hole Dia
Spindle Thread
Power Input
No Load Speed
Overall Length
Weight
Standard Accessories
125mm (5")
22.23mm (7/8")
M14 x 2
580W
10,000/min
254mm (10")
1.4kg (3.1 lbs.)
Side Handle, Wrench
HTC-G13SR3 125mm - 730W ANGLE GRINDER
Specifications:
* Wheel diameter 125mm
* Renewed larger cooling fan
* Powerful motor - Input 730W and max. output 950W
* Most durable overload in its class
* Compact - length 254mm
* Lightweight - 1.4kg
* Slide switch on side of tool body
Capacity: Wheel Dia
Hole Dia
Spindle Thread
Power Input
No Load Speed
Overall Length
Weight
Standard Accessories
125mm (5")
22.23mm (7/8")
M14 x 2
730W
10,000/min
254mm (10")
1.4kg (3.1 lbs.)
Side Handle, Wrench
Hit
ach
i P
ow
er T
ools
,
Sp
ares &
Accessorie
s
572Angle Grinders
HTC-G15SA2 150mm - 1200W ANGLE GRINDER
HTC-G18SG2 180mm - 2500W ANGLE GRINDER
* Wheel dia 150mm
* Input 1200W
* 3 position side handle
* New dust seal design
* Power Input 2500W max. output 3500W
* Vibration-absorbing side handle
* Tough motor for overload durability
* Wear resistant motor
* Dust proof construction
* Renewed design & switch
Specifications:
Capacity: Wheel Dia
Hole Dia
Spindle Thread
Power Input
No Load Speed
Overall Length
Weight
Standard Accessories
150mm(6")
22.23mm (7/8")
M14 x 2
1200W
8,500/min
391mm (15-12/32")
2.8kg (5.9 lbs.)
Side Handle, Depressed Centre Wheel, Wrench
180mm (7")
22.23mm (7/8")
M14 x 2
2500W
8500/min
478mm (8-13/16")
5.0kg (11.0 lbs.)
Side Handle, Wrench
Specifications:
Capacity: Wheel Dia
Hole Dia
Spindle Thread
Power Input
No Load Speed
Overall Length
Weight
Standard Accessories
DoubleInsulation
Spindle LockEco-Product
HTC-G23SR 230mm - 2000W ANGLE GRINDER
* Excellent overload durability
* Power Input 2000W
* Max power output 3300W with overload durability
* Durable metalic holder of ball bearings
* Externally accessible carbon brushes for easy replacement
Specifications:
Capacity: Wheel Dia
Hole Dia
Spindle Thread
Power Input
No Load Speed
Overall Length
Weight
Standard Accessories
230mm (9")
22.23mm (7/8")
M14 x 2
2000W
6600/min
463mm (18-7/32")
4.3kg (9.5 lbs.)
Side Handle, Wrench
Hit
ach
i P
ow
er T
ools
,
Sp
ares &
Accessorie
s
573 Angle Grinders & Polishers
DoubleInsulation
Eco-Product Spindle Lock
HTC-G23MR 230mm - 2500W ANGLE GRINDER
* Wheel diameter 230mm
* Double insulated aluminium housing - first in its class
* Powerful motor: power input 2400W max. power
output 4600W for overload durability
* Tool-less wheel guard
* Vibration absorbing side handle
* Soft, non-slip handle for increased comfort
Specifications:
Specifications:
Capacity: Wheel Dia
Hole Dia
Spindle Thread
Power Input
No Load Speed
Overall Length
Weight
Standard Accessories
230mm (9")
22.23mm (7/8")
M14 x 2
2400W
6600/min
492mm (19-3/8")
5.4kg (11.9 lbs.)
Side Handle, Wrench
HTC-SAT180 180mm - 750W SANDER/POLISHER - 2 SPEED
* 2 Applications: Sanding and polishing
* 2-Speed: High and low
Capacity: Sanding Disc
Wool Bonnet
Spindle Thread
Power Input
No Load Speed
Overall Length
Weight
Standard Accessories
180mm (7")
180mm (7")
M14 x 2 or U5/8-11
750W
Lo: 1,900/min. Hi: 3,400/min
395mm (15-9/16")
2.9kg (6.4 lbs.)
Side Handle, Rubber Pad, Wool Bonnet,
Types of Sanding Discs, Wrenches
Specifications:
HTC-G23SS 230mm - 2000W ANGLE GRINDER
* Wheel dia 230mm
* Power input 2200W + max. power output 3100W with
overload durability
Capacity: Wheel Dia
Hole Dia
Spindle Thread
Power Input
No Load Speed
Overall Length
Weight
Standard Accessories
230mm(9")
22.23mm (7/8")
M14 x 2
2,300W
6,600/min
463mm (18-7/32")
4.3kg (9.5 lbs.)
Side Handle, Wrench
Hit
ach
i P
ow
er T
ools
,
Sp
ares &
Accessorie
s
574Die Grinders
DoubleInsulation
DIE GRINDERHTC-GP2S2 25mm - 520W
STRAIGHT GRINDERHTC-GP13 125mm - 570W
* Power input 520W
* All ball bearing construction
* Easy-to-grip housing
* Internal carbon brush
Capacity: Collet Chuck
Max. Wheel Dia
Power Input
No Load Speed
Overall Length
Weight
Standard Accessories
6mm (or 1/4")
25mm (31/32")
520W
29,000/min
359.4mm (14-5/32")
1.7kg (4.0 lbs.)
Wrenches
Specifications:
DIE GRINDER (VAR)HTC-GP3V 25mm - 760W
�
�
�
�
�
Max wheel dia: 25mm (1")
Power input 760W
Variable speed by dial: 7,000 - 29,000/min.
Electronic control: Soft start and constant speed
Easy-to-grip housing
Capacity: Collet Chuck
Max. Wheel Dia
Power Input
No Load Speed
Overall Length
Weight
Standard Accessories
6mm (or 1/4")
25mm (1")
760W
7,000-29,000/min
406mm (16")
1.8kg (4.0 lbs.)
Side Handle, Collet Chuck, Wrenches
Specifications:
DIE GRINDER (VAR)HTC-GP5V 25mm - 760W
�
�
�
�
�
Max wheel dia: 50mm (2")
Power input 760W
Variable speed by dial: 2,000 - 8,300/min.
Electronic control: Soft start and constant speed
Easy-to-grip housing
Capacity: Collet Chuck
Max. Wheel Dia
Power Input
No Load Speed
Overall Length
Weight
Standard Accessories
6mm (or 1/4")
50mm (2")
760W
2,000-8,300/min
406mm (16")
1.9kg (4.2 lbs.)
Side Handle, Collet Chuck, Wrenches
Specifications:
* For 125mm (5")grinding wheel
* Power input 570W
* Wheel 125x19x12.7mm
* A36P grit
Capacity: External Dia
Thickness
Hole Dia
Spindle Thread
Power Input
No Load Speed
Overall Length
Weight
Standard Accessories
125mm (5")
19mm (3/4")
12.7mm (1/2")
M12 x 1.75
570W
4,800/min
598mm (23-1/2")
5.5kg (12.1 lbs.)
Grinding Wheel, Wrench
Specifications:
Photo shown with an optional mounted wheel
Specifications:
Capacity: Blade Dia.Max Cut Depth: 90°
45 °Power InputNo Load SpeedOverall LengthWeightStandard Accessories
165mm (6-1/2")57mm (2-1/4")38mm (1-1/2")1050W5,500/min.276mm (10-7/8")4.0kg (8.8 lbs.)Blade, Guide, Adapter for Dust Collector Bolt, Wrench
Specifications:
HTC-C6SS 165mm - 1050WØ CIRCULAR SAW
HTC-C7SS 190mm - 1050WØ CIRCULAR SAW - ELECTRIC BRAKE
* Rigid aluminium base for fine cut
* Side handle easy to grip
* Backward dust emission
Capacity: Blade Dia.Max Cut Depth: 90°
45 °Power InputNo Load SpeedOverall LengthWeightStandard Accessories
190mm (7-1/2")68mm (2-11/16")46mm (1-/8")1050W5,500/min.291mm (11-15/32")3.4kg (7.5 lbs.)Blade, Guide, Wrench
* For 190mm (7-1/2") Blade
Hit
ach
i P
ow
er T
ools
,
Sp
ares &
Accessorie
s
575 Shear & Nibbler/Circular Saws
Spindle LockDoubleInsulation
Eco-Product
ElectronicBrake
Dust ExtractingType
HTC-CE16SA 1,6mm - 400W SHEAR
NIBBLERHTC-CN16SA 1,6mm - 400W
* Smaller grip
* Lightweight
* Scrap guide protects operator's hand from cut-off strips
* Easily replaceable blades have 8 cutting edges each
* Smaller grip
* Compact and lightweight
* 3 positive stop die holder permits straight, right and left cutting
* Downward cutting permits cutting of trapezoidal metal plate
Specifications:
Capacity: SteelStainless
Min. Cutting RadiusPower InputNo Load SpeedOverall LengthWeightStandard Accessories
1.6mm (16 gauge)1.2mm (18 gauge.)25mm (1")400W4700/min.250mm (9-7/8")1.7kg (3.7lbs.)Blade Set, Thickness Gauge,Hex. Bar Wrench
Specifications:
Capacity: SteelStainlessCutting Width
Min. Cutting RadiusPower InputNo Load SpeedOverall LengthWeightStandard Accessories
1.6mm (16 gauge)1.2mm (18 gauge)5mm (3/16")40mm (1-9/16")400W2300/min.250mm (9-7/8")1.6kg (3.5lbs.)2 x Hex. Bar Wrenches
Hit
ach
i P
ow
er T
ools
,
Sp
ares &
Accessorie
s
576Circular Saws
Spindle LockDoubleInsulation
Eco-Product
ElectronicBrake
Capacity: Blade DiaMax Cut Depth: 90°
45 °Power InputNo Load SpeedOverall LengthWeightStandard Accessories
235mm (9-1/4")86mm (3-3/8")65mm (2-9/1 6")2000W5000/min.397mm (15-5/8")6.8kg (15.0 lbs.)Blade, Guide, Bolt, Wrench Adapter forDust Collector
* Convenient electric brake
* PTFE coating base for smooth sliding on
workpiece
* Magnesium gear cover
* Soft grip cover
* Rigid aluminium base for fine cut
* Large knob easy to adjust cut depth
* Guide included
Specifications:
HTC-C9BU2 235mm - 2000WØ CIRCULAR SAW - ELECTRIC BRAKE
Capacity: Blade Dia.Max Cut Depth: 90°
45 °Power InputNo Load SpeedOverall LengthWeightStandard Accessories
235mm (9-1/4")86mm (3-3/8")65mm (2-9/1 6")2000W5000/min.397mm (15-5/8")6.8kg (15.0 lbs.)Blade, Guide, Bolt, Wrench Adapter for Dust Collector
* Compact and lightweight: 6.8kg
* Gear Cover manufactured from die-cast
magnesium alloy
* Low noise and vibration
* Comfortable soft grip handle
* Base and lower guard manufactured from
heavy duty die cast aluminium for precise
cutting
* Large depth adjuster knob for ease of use
* Includes cutting guide
Specifications:
CIRCULAR SAWHTC-C9U2 235mm - 2000WØ
Dust ExtractingType
Capacity: Blade Dia.Max Cut Depth: 90°
45 °Power InputNo Load SpeedOverall LengthWeightStandard Accessories
190mm (7-1/2")66mm (2-19/32")48mm (1-7/8")1200W5500/min.312mm (12-9/32")4.0kg (8.8 lbs.)Blade, Guide, Adapter for Dust Collector Bolt, Wrench
* For 190mm (7-1/2") Blade
* Compact and lightweight: 4.0kg
* Low noise and vibration
* Comfortable, soft grip handle
* Base and lower guard manufactured from
heavy duty die cast aluminium for precise
cutting
* Large depth adjuster knob for ease of use
Specifications:
CIRCULAR SAWHTC-C7U2 190mmØ - 1200W
Capacity: Blade Dia.Max Cut Depth: 90°
45 °Bevel CapacityPower InputNo Load SpeedOverall LengthWeightStandard Accessories
185mm (7-1/4")62mm (2-7/16")47.5mm (1-7/8")0-451710W6,000/min.310mm (12-13/64")4.3kg (9.4 lbs.)Blade, Guide, Wrench , Carry Case
°
Specifications:
HTC-C7ST 185mm - 1710WØ CIRCULAR SAW - ELECTRIC BRAKE
* For 185mm (7-1/4") Blade
* Power input 1,710W
* Lightweight in comparison with 1,700W class
Hitachi circular saws
* Enhanced max cut depth
* Blower over base
Hit
ach
i P
ow
er T
ools
,
Sp
ares &
Accessorie
s
577 Jig Saws
HTC-CJ110MV 110mm - 720W JIG SAW (VAR)
* Variable speed by means of dial
and trigger
* Tool less blade change
* New orbital locus and balanced
design for low vibration and
smooth cutting
* Powerful input: 720W motor
* 3 mode orbital action
* LED light
* Soft grip handle
* Lightweight: 2.2kg
* Dust blowing for clear view over cut line
Specifications:
Capacity: WoodMild Steel Plate
Min. Cutting RadiusBase Tilt AnglePower InputLength of StrokeNo-Load Speed (stroke)Overall LengthWeightStandard Accessories
110mm (4-5/16")10mm (3/8")25mm (1")45° Right/Left720W26 mm (1")850 - 3000/min.246mm (9-41/64")2.2kg (4.9 Ibs.)Blade, Splinter Guard, Chip Cover, Dust Collection Adapter, Carrying Case
VariableSpeed
With CarryingCase
DoubleInsulation
Eco-Product
Orbital CuttingAction
HTC-FCJ65V3 65mm - 400W (VAR)
Specifications:
Capacity: WoodMild Steel Plate
Min. Cutting RadiusBase Tilt AnglePower InputLength of StrokeNo-Load Speed (stroke)Overall LengthWeightStandard Accessories
65mm (2-5/8")6mm (1/4")25mm (1")45° Right/Left400W18 mm (45/64")0 - 3000/min.197mm (7-3/4")1.5kg (4.2 Ibs.)Blade, Splinter Guard, Chip Cover Wrench
JIG SAW (VAR)
* Large soft grip for comfortable operation
* Motor with two ball-bearings for longer life and efficient power transmission
* Compact and lightweight: 1.5kg
* Dust blowing for clear view over cut line
* Connects directly to a dust collector without adapter
* Variable speed by means of dial and trigger
Dust ExtractingType
Specifications:
* Large soft grip for comfortable operation
* Motor with two ball-bearings for longer life and efficient power transmission
* Compact and lightweight: 1.5kg
* Dust blowing for clear view over cut line
* Connects directly to a dust collector without adapter
Capacity: WoodMild Steel PlateMin. Cutting
Base Tilt Angle RadiusPower InputLength of StrokeNo-Load Speed (stroke)Overall LengthWeightStandard Accessories
65mm (2-5/8")6mm (1/4")25mm (1")45' Right/Left400W18 mm (45/64")3,000/min.197mm (7-3/4")1.5kg (4.2 Ibs.)Blade, Splinter Guard, Chip Cover, Wrench
HTC-FCJ65S3 65mm - 400W JIG SAW
Hit
ach
i P
ow
er T
ools
,
Sp
ares &
Accessorie
s
578Reciprocating Saw/Routers
Specifications:
* Powerful motor: input 900W
* Soft grip handle with ergonomic design
* Improved clutch for collet chuck
* Fine adjustment knob (optional)
Capacity: Collet ChuckStrokePower InputNo Load SpeedWeightStandard Accessories
8mm (or 1/4")60mm (2-3/8")900W25000m/min.3.2kg (7.1 lbs.)Straight Guide, Template Guide, Wrench
HTC-M8SA2 8mm - 900W ROUTER
Spindle LockDoubleInsulation
Electronic ConstantSpeed Control
VariableSpeed
Electronic SoftStart Control
With CarryingCase
RECIPROCATING SAW 2-MODE ACTION VAR130mm - 1150WHTC-CR13VBY
Specifications:
* Uses Vibration Protection
* 150mm curved blade
* 2 mode cutting action : straight & swing cutting on
both normal & upside down blade positions
* Toolless adjustable shoe by shoe button
* Dust & water-resistant triple-seating construction
Capacity: PipeSteel PlateWood
Power InputLength of StrokeNo-Load Speed(stroke)Overall LengthWeightStandard Accessories
130 mm (5")19mm (3/4")300mm (11-13/16")1,150W32mm (1-1/4")0 – 3000/min.465 (18-5/16")4.4kg (9.7 lbs.)Blade, Carrying Case
Capacity: WoodMild Steel PlateMin. Cutting Rad.
Base Tilt AnglePower InputLength of StrokeNo-Load Speed(stroke)Overall LengthWeightStandard Accessories
110 mm (4-5/1 6")10mm (3/8")25mm (1")45° Right/Left720W26mm (1")850 – 3000/min.264 (10-25/64")2.2kg (4.9 lbs.)Blade, Splinter Guard, Chip Cover, Dust Collection Adapter, Carrying Case
Specifications:
JIG SAW (VAR)110mm - 720WHTC-CJ110MVA
* Variable speed by means of dial and
trigger
* Tool less blade change
* New orbital locus and balanced design
for low vibration and smooth cutting
* Powerful input: 720W motor
* 3 mode orbital action
* LED light
* Soft grip handle
* Lightweight: 2.2kg
* Dust blowing for clear view over cut line
* Barrel Grip
Hit
ach
i P
ow
er T
ools
,
Sp
ares &
Accessorie
s
579 Routers
Spindle LockDoubleInsulation
Electronic ConstantSpeed Control
VariableSpeed
Electronic SoftStart Control
With CarryingCase
19
12mm - 2000W ROUTERHTC-M12SE
12mm - 2000W ROUTER - ELECTRONIC CONTROLHTC-M12VE
* Power input 1,700W
* 3-angle adjustable handle
* Ease to adjust routing depth
Capacity: Collet Chuck
Stroke
Power Input
No Load Speed
Weight
Standard Accessories
12mm (or 1/2")
65mm (2-9/16")
1,700W
22,000m/min.
5.3kg (11.7 lbs.)
Parallel Straight Guide, Template Guide, Wrench
* Power input 2000W
* Electronic Control: Soft start and constant speed
* 3-angle adjustable handle
* Ease to adjust routing depth
Capacity: Collet Chuck
Stroke
Power Input
No Load Speed
Weight
Standard Accessories
12mm (or 1/2")
65mm (2-9/16")
2000W
8,000-22,000m/min.
5.3kg (11.7 lbs.)
Straight Guide, Template Guide, Wrench
Specifications:
Specifications:
EL
ECTRON
IC
12mm - 2000W ROUTER - ELECTRONIC CONTROLHTC-M12V2
EL
EC
TRON
IC
Capacity: Collet ChuckStrokePower InputNo Load SpeedWeightStandard Accessories
12mm (or 1/2")65mm (2-9/16")2000W8000-22000/min3.4kg (7.5 lbs.)2 Collect Chucks, Centering Gauge, Straight Guide, Template Gauge,Template Guide Adapter, Dust Guide, Dust Guide Adapter, Wrench
* Powerful motor: input 2000W
* Electronic Control: Soft start and constant speed
* Variable speed dial on handle grip for better usability
* Better routing operability when used with an optional bench stand
* Soft grip handle with ergonomic design
* Improved clutch for collet chuck
* Dust guide
* Includes 2 collet chucks - 12mm & 8mm
Specifications:
Hit
ach
i P
ow
er T
ools
,
Sp
ares &
Accessorie
s
580Planers
* Easy-to-use depth adjustment
* Powerful motor for efficient cutting
* Center V-groove on base sole
* Aluminum alloy base for scratch-free work
* Fast and east blade replacement
Capacity: Cutting WidthMax. Cut Depth
Power InputNo Load SpeedOverall LengthWeightStandard Accessories
82mm (3-1/4")3mm (1/8")720W14000/min.309mm (11-5/32")3.0kg (6.6 lbs.)Blades, Blade Setting Gauge, Guide, Wrench
Specifications:
HTC-P20SA2 82mm - 720W PLANER - 3mm D.O.C.
* Compact and lightweight
* High rotation speed: 15000/min.
Capacity: Cutting WidthMax. Cut Depth
Power InputNo Load SpeedOverall LengthWeightStandard Accessories
82mm (3-1/4")1mm (1/32")570W15000/min.296mm (11-21/32")2.5kg (5.5 lbs.)Blades, Blade Setting Gauge, Guide,Wrench
Specifications:
HTC-P20SB 82mm - 570W PLANER - 1mm D.O.C
* Powerful motor: 900W
* All ball bearing construction
Capacity: Cutting WidthMax.Cut Depth
Power InputNo Load SpeedOverall LengthWeightStandard Accessories
92mm (3-5/8")3mm (1/8")900W12000/min.410mm (16-5/32")4.0kg (8.8 lbs.)Blades, Blade Setting Gauge, Guide,Wrench, Carry Case
Specifications:
HTC-F30A 92mm - 900W PLANER - 3mm D.O.C.
DoubleInsulation
With CarryCase
Hit
ach
i P
ow
er T
ools
,
Sp
ares &
Accessorie
s
581 Orbital Sanders
DoubleInsulation
With CarryCase
Random OrbitAction
Dust ExtractingType
Specifications:
* Compact and lightweight
* Low height and stable design
* Low noise
* Comfortable soft grip and larger trigger
* New sand paper holder
* Dust bag
Capacity: Pad SizeOrbit Diameter
Power InputNo Load Speed: Spindle
OrbitOverall LengthWeightStandard Accessories
92 x 184mm (3-5/8 x 7-1/4")2mm (3/32")180W10000/min.20000/min.184mm (7-1/4")1.3kg (2.9lbs)Sanding Paper Dust Bag, Punch Plate
ORBITAL SANDERHTC-FSV10SA 92mm - 180W
Capacity: Pad SizePower InputOrbital DiaNo Load Speed: SpindleOrbitOverall LengthWeightStandard Accessories
114 x 228mm (4-1/2 x 9")300W2.4mm (0.09")10000/min20000/min300mm (11-13/16")2.8kg (6.2 lbs.)Sand Paper, Dust Bag
* Excellent dust collection efficiency enabled by "Through the Base"
dust extracting system
* Flush sanding on 3 sides
* Direct drive system for minimum vibration and smooth finishing
* Lever-action, quick paper clamp system
* All bearing construction
Specifications:
ORBITAL SANDERHTC-SV12SD 114mm - 300W
Specifications:
* All new design
* Large soft grip fits in the palm of the hand for comfortable operation
* High power and class top sanding
* Class-top dust collecting performance
Capacity: Pad SizePower InputOrbit DiameterNo Load Speed: Spindle
OrbitOverall LengthWeightStandard Accessories
110 x 100mm (4-1/2 x 4")200W1.5mm (1/16")14000/min.28000/min.137mm (5-3/8")1.1kg (2.4lbs)Sanding Paper, Dust Bag
ORBITAL SANDERHTC-SV12SG 110mm - 200W
Hit
ach
i P
ow
er T
ools
,
Sp
ares &
Accessorie
s
582Orbital Sanders/Belt Sanders
Specifications:
* Powerful 200W input motor
* Large soft grip handle
* Delta-shaped sanding pad for
corner work
* Innovative design
* Class-top dust collecting performance
Capacity: Pad SizeTriangle
Power InputOrbit DiameterNo Load Speed: Spindle
OrbitOverall LengthWeightStandard Accessories
110 x 190mm (4-3/8 x 7-1/2")96 x 96 x 96mm (3-3/4 x 3-3/4 x 3-3/4")200W1.5mm (1/16")14000/min.28000/min.133mm (5-1/4")1.0kg (2.2lbs)Sanding Paper, Dust Bag
ORBITAL SANDERHTC-SV12SH 110mm - 200W
Capacity: Belt SizePower InputNo Load Belt SpeedOverall LengthWeightStandard Accessories
76 x 533mm (3 x 21")1020W250 - 450m/min (820-1,475ft./min.)318mm (12-33/64")4.3kg (9.7 lbs.)Sanding Belt, Dust Bag
* Sanding position visible through transparent cover
* Powerful motor input: 1020W
* Width 171mm
* Variable speed by dial, and large, 2-finger trigger switch
* Soft grip on handle and sub handle
* Dust bag on the left for sanding at corner
Specifications:
BELT SANDER - (VAR)HTC-SB8V2 76mm - 1020W
Capacity: Belt SizePower InputNo Load Belt Speed:Overall LengthWeightStandard Accessories
100 x 610mm (4 x 24")1,020W420m/min. (1380ft./min.)363mm (14-19/64")5.2kg (11.5 lbs.)Sanding Belt, Dust Bag
* Sanding position is visible through
transparent cover
* Soft grip on handle and sub handle
* Single speed
* 2 finger large trigger switch
* Width 189mm
* Belt size: 100 x 610mm
* Dust bag on the left allows for easy corner
sanding
Specifications:
BELT SANDER - 1 SPEEDHTC-SB10S2 100mm - 1020W
DoubleInsulation
Eco-Product
2 SpeedLOWHIGH Dust Extracting
Type
Capacity: Standing PadPower InputOrbit DiaNo Load SpeedOverall HeightWeightStandard Accessories
125mm (5")230W3.2mm (1/8")7000 - 12000/min145mm (5-11/16")1.4kg (3.1 lbs.)Sanding Paper, Dust Bag
* Variable speed and stable speed control
* Random orbit sanding action
* Large, soft grip handle for comfort
* High performance sanding and dust collection
Specifications:
RANDOM ORBITAL SANDER - (VAR)HTC-SV13YA 125mm - 230W
VariableSpeed
With CarryCase
RandomOrbital Action
Hit
ach
i P
ow
er T
ools
,
Sp
ares &
Accessorie
s
583 Screwdrivers
SCREWDRIVER - DRY WALL - VAR/REVHTC-W6VM 6mm - 620W
* Ideal for self drilling TEK screws
* Powerful motor: power input 620W
* Detachable nose piece for ease of bit
replacement
* Comfortable, soft grip handle
* Aluminium gear cover for durability
* Soft protector around gear cover to prevent
damage to workpiece and prevent heat
conduction to hands
* Large 2 finger sized trigger switch
Cap: Drywall ScrewSelf-Drilling Screw
Bit ShankPower InputNo Load SpeedOverall LengthWeightStandard Accessories
6mm (1/4")6mm (1/4")6.35mm (1/4") Hex620W0 - 6000/min.294mm (11-19/32")1.4kg (3.1 lbs.)Driver Bit, Magnetic Bit Holder, Sub Stopper
Specifications:
VariableSpeed
DoubleInsulation
Eco-Product
Reversible
SCREWDRIVER - DRY WALL - VAR/REVHTC-W6VA4 6mm - 620W
* Ideal for self drilling TEK screws
* Powerful motor: power input 620W
* Detachable nose piece for ease of bit
replacement
* Comfortable, soft grip handle
* Aluminium gear cover for durability
* Soft protector around gear cover to prevent
damage to workpiece and prevent heat
conduction to hands
* Large 2 finger sized trigger switch
Cap: Drywall ScrewSelf-Drilling Screw
Bit ShankPower InputNo Load SpeedOverall LengthWeightStandard Accessories
6mm (1/4")6mm (1/4")6.35mm (1/4") Hex620W0 - 3000/min.294mm (11-19/32")1.4kg (3.1 lbs.)Driver Bit, Magnetic Bit Holder, Sub Stopper
Specifications:
SCREWDRIVER - DRY WALL - VAR/REVHTC-W6V4 6mm - 620W
* Ideal for self drilling TEK screws
* Powerful motor: power input 620W
* Detachable nose piece for ease of bit
replacement
* Comfortable, soft grip handle
* Aluminium gear cover for durability
* Soft protector around gear cover to prevent
damage to workpiece and prevent heat
conduction to hands
* Large 2 finger sized trigger switch
Cap: Drywall ScrewSelf-Drilling Screw
Bit ShankPower InputNo Load SpeedOverall LengthWeightStandard Accessories
6mm (1/4")6mm (1/4")6.35mm (1/4") Hex620W0 - 4500/min.294mm (11-19/32")1.4kg (3.1 lbs.)Driver Bit, Magnetic Bit Holder, Sub Stopper
Specifications:
Hit
ach
i P
ow
er T
ools
,
Sp
ares &
Accessorie
s
584Impact Wrenches, Blower
IMPACT WRENCHHTC-WR16SA 1/2" Sq. Dr. - 480W
IMPACT WRENCHHTC-WR22SA 3/4" Sq. Dr. - 850W
* For 1/2" (12.7mm) square drive
* Most powerful and highest torque:
360Nm in this class
* Capacity for high tension bolt 16mm
* Reversible
* Soft grip handle
* For 3/4" (19mm) square drive
* Most powerful and highest torque:
610Nm in this class
* Capacity for high tension bolt 22mm
* Durable aluminium housing and double
insulation
* Reversible
* Soft grip handle
Capacity: Bolt: OrdinaryHigh TensionTorque
Square DrivePower InputNo Load SpeedImpact RateOverall LengthWeightStandard Accessories
12 - 22mm (1/2 - 7/8")12 - 16mm (1/2 - 5/8")360Nm (3,180in.-lbs.)1/2" (12.7mm)480W1900/min.2100/min.258mm (10-5/32")2.8kg (6.2 lbs.)Side Handle
Specifications:
Capacity: Bolt: OrdinaryHigh TensionTorque
Square DrivePower InputNo Load SpeedImpact RateOverall LengthWeightStandard Accessories
14 - 24mm (9/16 - 15/16")16 - 22mm (5/8 - 7/8")610Nm (5,390in.-lbs.)3/4" (19mm)850W1800/min.2000/min.303mm (11-15/16")4.8kg (10.6 lbs.)Side Handle
Specifications:
DoubleInsulation
Eco-Product
Reversible
Specifications:
Capacity: Air PressureAir Volume Flow
Power InputNo Load Speed OverallLengthWeightStandard Accessories
0 - 5.5 kPa0 - 3.8 m3 /min550W0 - 16000min.447mm1.7kgNozzle, Dust Bag
* Variable speed by means of trigger
and dial
* Powerful blower
* Air volume flow: 3.8m³/min
* Soft grip handle
* Innovative design
* Self standing
* Dust bags available as a standard accessory
BLOWER - VARIABLEHTC-RB40VA 3,8m/min - 550W
VariableSpeed
Hit
ach
i P
ow
er T
ools
,
Sp
ares &
Accessorie
s
585 Cut-off Machine/Mitre Saws
HTC-CC14SF 2000W CUT-OFF MACHINE
Capacity: Blade Dia(H x W) Cross Cut: 0°
Mitre Cut 45°Mitre Cut 52°Bevel Cut 45°
Compound Mitre 45° & Bevel 45°Power InputNo Load SpeedMitre Angle: Right
LeftBevel Angle: LeftPositive Mitre Angle StopDimensionsWeightStandard Accessories
255mm59 x 114mm or 89 x 101mm59 x 102mm or 89 x 70mm59 x 89mm or 89 x 54mm41 x 144mm41 x 102mm1,520W5,000/min0 - 52°0 - 52°0 - 45°0, 15, 22.5, 31.6 and 45°460 x 628 x 561mm11.9kgBlade, Dust Bag, Vise Assembly, Sub-Fence, Wrenches
* Lightweight - 11.9kg
* Thumb actuated positive mitre stops for
quick and easy adjustment
* Soft grip handle
* Large table
* Equipped with chip deflector
* Pivoting sub-fence supports larger stock
Specifications:
Specifications:
HTC-C10FCE2 255mm - 1,520WØ MITRE SAW
* Laser guide system
* Lightweight - 12.0kg
* Thumb actuated positive mitre stops
for quick and easy adjustment
* Soft grip handle
* Large table
* Equipped with chip deflector
* Pivoting sub-fence supports larger stock
HTC-C10FCH2 255mm - 1,520WØ MITRE SAW - LASER GUIDED
Capacity: Blade Dia(H x W) Cross Cut: 0°
Mitre Cut 45°Mitre Cut 52°Bevel Cut 45°
Compound Mitre 45° & Bevel 45°Power InputNo Load SpeedMitre Angle: Right
LeftBevel Angle: LeftPositive Mitre Angle StopDimensionsWeightStandard Accessories
255mm59 x 114mm or 89 x 101mm59 x 102mm or 89 x 70mm59 x 89mm or 89 x 54mm41 x 144mm41 x 102mm1,520W5,000/min0 - 52°0 - 52°0 - 45°0, 15, 22.5, 31.6 and 45°460 x 628 x 561mm12.0kgBlade, Dust Bag, Vise Assembly, Sub-Fence, Wrenches
Specifications:
* Power input 2,000W
* Sturdy aluminum housing and double
insulation
* Soft grip handle
* Quick lock vise
* Spark diversion guard
* Spindle Lock
Capacity: Blade DiaPipe Dia.Shaped Steel
Power InputNo Load SpeedDimensions
WeightStandard Accessories
65mm (2-9/16")120mm (4-47/64")130 x 130mm (5-1/8 x 5-1/8")2,000W3,800/min603 x 318 x 603mm(23-47/64 x 11-7/32 x 23-47/64")16.5kg (36.3lbs)Cut-off Wheel, Wrenches
Spindle LockDoubleInsulation
Eco-Product
Dust ExtractingType
DO NOT STARE INTO
LASER BEAM
Hit
ach
i P
ow
er T
ools
,
Sp
ares &
Accessorie
s
586Magnetic Base Drills
MAGNETIC BASE DRILL - 12-32mm MILLING CAPACITYHTC-BM20YK 13mm Drill - 770W
12-32mm13mm550RPM770W1400kg9.5kgAuto Coolant System, 3 Hexagon,Wrenches, Cutting Oil, Ear ProtectorsSafety Glasses, Safety Gloves, SafetyChain, Carrying Case1 x 14mm Short Cutter1 x 18mm Short Cutter1 x 22mm Short Cutter
Capacity MillingTwist Drill
No-Load SpeedPower InputMagnetic AdhesionWeightStandard Accessories
Specifications:
* Weight onlt 9.5kg* New dual coil High Density
magnet with 1400kg pullingpower
* Compact* Centrally positioned operating
buttons* High quality safety relay circuit* Reset safety in case of power failure* Delivery ready for use including
accessories* 6 Months warranty
With CarryingCase
NEWEUROBOOR
SENSORTECThe unique Euroboor Sensortec system.
The attachment force generated by your magnet depends on a number of factors:
the thickness of the material to be drilled through
any possible coating or paint layer present on the material
chips or other dirt, oil or grease between the magnet and the material.
The new Euroboor electric drill magnets are equipped with a sensor that measures whether the
magnet exercises sufficient attachment force to the material. The result of the measurement is
presented by means of a LED indicator on the switch panel. The ”red light” indicator warns you that
there is insufficient force to attach the magnet, while the ”green light” indicator indicates that there is
sufficient force to do so.
�
�
�
Sensortec (magnet indicator light)
MAGNETIC BASE DRILL12-50mm MILLING CAPACITY NO. 2 MORSE TAPER
HTC-ECO50 23mm Drill - 1150W
* Weight only 13.0kg
* Very compact
* New dual coil High Density magnet with
1700kg pulling power
* Strong 1150W durable H.P. motor
* Dual speed control
* Centrally positioned operating buttons
* Optimal arbor bearing
* High quality safety relay circuit
* Reset safety in case of power failure
* Delivered ready for use
* 12 month warranty
Capacity MillingMTS Drill
Speed 12
Power InputMagnetic AdhesionWeightStandard Accessories
12-50mm23mm (MT2)250RPM450RPM1150W1850kg13kg3 Hexagon Wrenches, Cutting Oil, Ear Protectors, Safety Glasses,Safety Gloves, Safety Chain, Carrying Case.
Specifications:
LOWHIGH
2 SpeedLOWHIGH
Hit
ach
i P
ow
er T
ools
,
Sp
ares &
Accessorie
s
587 Magnetic Base Drills/Core Drill Grinder
VariableSpeed
With CarryingCase
ReversibleTwoSpeed
LOWHIGH Safety Release
Clutch Mechanism
MAGNETIC BASE DRILL12-100mm MILLING CAPACITY - NO. 3 MORSE TAPER
Specifications:
Capacity MillingMTS Drill
Speed 1234
Power InputMagnetic AdhesionWeightStandard Accessories
12-100mm32mm (MT3)40-110RPM120-175RPM140-370RPM220-600RPM1800W2700kg26kg3 Hexagon Wrenches, Cutting Oil, EarProtectors, Safety Glasses, Safety,Gloves, Safety Chain, Carrying Case
LOWHIGH
* Weight only 26.0kg
* Robust machine
* New dual coil High Density magnet
with 3000kg pulling power
* Strong 1800W durable H.P. motor
* Dual mechanical speed control, both
are electronic and stepless variable
* Mechanical slipping clutch
* Electronic overload protection
* Stepless variable torque control
* Clockwise and anti-clockwise switch
with 'zero point' changeover safety
* Centrally positioned operating buttons
* Optimal dual arbor guidance
* High quality safety relay circuit
* Reset safety in case of power failure
* Delivered ready for use
* 12 month warranty
CORE DRILL GRINDING MACHINEHTC-ERM100-02
Specifications:
LOWHIGH
* Core drill grinding machine is intended exclusively
for grinding HSS and hard metal core drills
* Used to sharpen the core drill in simplest possible
manner
* Core drills can be sharpened with maximum
precision
* Its robust and precise construction, low power
requirement and ergonomic design enable instant
operation
* Adjustment and grinding are undertaken manually
Dimensions L x B x H 410 x 412 x 390 (without optics)
410 x 412 x 460 (with optics)
Net Weight ± 29kg
Power supply 230Volt, 50/60 Hz
Motor 230 Volts, 0.12 kW, 2,800 rpm
Travel path Motor carriage 75
Guidance carriage 215
Runtime of grinding discs 10
Grinding disc Diamond grinding disc
Coated galvanically
Diameter 125mm
Hole diameter 10mm
Core drill shaft bore 19mm (weld on shaft) serial
32mm (weld on shaft) optional
HTC-ECO100/4 32mm Drill - 1800W
Hit
ach
i P
ow
er T
ools
,
Sp
ares &
Accessorie
s
588Beveling Machines/Steel Circular Saw
EUROBOOR BEVELING MACHINE
* The LKF200 is the ideal machine for making welding angles
* The angle and depth are adjustable
* The quality of the weld side which is made with the LKF200 guarantees a better weld
connection
* The LKF200 is fast and due to the perfect finish, further work for completion is
unnecessary
* The LKF200 can be used on profiles, plates and pipes
* The apparatus is supplied with an electronic overload safety cut out
EUROBOOR BEVELING MACHINE
EUROBOOR PORTABLE CIRCULAR SAW
Specifications:
* The LKF450 is the ideal machine for making welding angles, to
countersink drilled holes and to de-burr material
* Adjustable depth
* The quality of the weld side which is made with the LKF450
guarantees a better weld connection
* Lightweight - only 4.7kg
* Powerful "Soft-Start" 1100W motor
* Suitable for steel, stainless steel and aluminium
0 ~ 6 mm45° (Can upgrade to 30° and radius 2.5mm)3000-6000 RPM1100W4.7 kgPlastic Carry Case, 45° Milling Headincluding 2 Cutting Plates, Key (SW22)
Max Bevel WidthAngle
No-Load SpeedPower InputWeightStandard Accessories
HTC-LKF450/2 1100W
HTC-LKF200 1100W
HTC-EHC230 1700W
Specifications:
* Fast, burr free operation
* No greasing or cooling necessary
* Practical spark-free machining
* Automatic chip collection
* Variable sawing angle
90° 82mm Tubes, 45° 56mm0 - 45°230mm3 - 13mm2600 RPM1700W7.1kg30 minutes
Capacity DepthAngleBlade
Max. CapacityNo-Load SpeedPower InputWeightMax. Continuous Use
BLADERUNNER SAWBLADES WITH OMNICUTTING TECHNIQUEOne blade enables you to cutsteel, stainless steel oraluminium
Ø 230mm x 48T x 2.2 AxleHole =25.4mm
With CarryingCase
Specifications:
0 ~ 14 mm15° - 60°20 mm2850 RPM1100W22kgSteel Carry Case, 2 Mill Heads, LKF225Pipe/Tube, Accessory Bracket, 12 CuttingPlates, Assembly Tools
Capacity DepthAngle
Max Bevel WidthNo-Load SpeedPower InputWeightStandard Accessories
Hit
ach
i P
ow
er T
ools
,
Sp
ares &
Accessorie
s
589 Core Drill Cutters/Accessories
Features:
1. Perfect start without sliding out of position
2. Conical polished inside surface
3. Precise centre pilot fitting
6. More accurate
7. Longer drill depth
8. Stronger, therefore less breakage
4. Polished clamp surface 9. Much longer standing time
5. Faster, because each tooth cuts 10. Guaranteed discharge of the slug
Perfectly polished
clamp surfacesConical inside
surface
Double action teethOptimal centre
pilot fitting
CUTTERS - LONG SERIES (55mm)"WELDON SHANK" from 12-60mm
CUTTERS - SHORT SERIES (30mm)"WELDON SHANK" from 12-60mm
MORSE-TAPER REDUCING SLEEVES
PRODUCT
CODE
DESCRIPTION
"WELDON" CUTTER ARBORS
PRODUCT
CODE
DESCRIPTION
COOLING ACCESSORIES & LUBRICANTS
PRODUCT
CODE
DESCRIPTION
PILOT PINS
PRODUCT
CODE
DESCRIPTION
DRILL CHUCKS & ADAPTORS
PRODUCT
CODE
DESCRIPTION
PRODUCT
CODE
DESCRIPTION
COUNTER SINK DRILLS
MAGNETIC BASE DRILL ACCESSORIES
CORE DRILL CUTTERS
Hit
ach
i P
ow
er T
ools
,
Sp
ares &
Accessorie
s
590Accessories
CHISELS BULL POINT COLD CHISELS
SCALING CHISELS, ASPHALT CUTTERS
BULL POINT
Code
HTCH24PC-1
HTC40MA-1
HTCH40MA-2
HTCKE40-1
HTCKE90-1
HTCKE90-3
HTCKE89-2
HTC993180L
Size/Breaker
SDS-PLUS 250MM ROUND
SDS-MAX 280MM ROUND
SDS MAX 400MM
DH38 280MM ROUND
H55 300MM ROUND
H55 450MM ROUND
H65 410MM ROUND
H90 520MM BULL POINT
COLD CHISELS
Code
HTCH24PC-2
HTCH24PC-5
HTCH40MA-4
HTCH40MA-5
HTCKE40-6
HTCKE90-6
HTCKE89-5
HTC993181L
Size/Breaker
SDS-PLUS 250MM
SDS-PLUS 250MM
SDS-MAX 280MM
SDS-MAX 400MM
DH38 450MM
H55 450MM
H65 410MM
H90 COLD 520MM HEX
SCALING CHISELSASPHALT CUTTERS
Code
HTCH24PC-7
HTCH40MA-7
HTCKE85-7
HTCKE90-8
HTCKE89-8
HTC993182L
Size/Breaker
SDS-PLUS 40 X 250MM
SDS-MAX 45 X 280MM
H41 50 X 280MM
H55 75 X 280MM
H65 75 X 410MM
H90 ASPHALT 120MM HEX
CHANNELING CHISELS
Code
HTC-H24PC-7
Description
250X40MM SDS+
DRILL CHUCKS & KEYS
�
�
Easy to fit
Suitable for all portable andcordless power drills
�
�
�
�
Multi craft range
Bite hardened jaws
Manufactured to DIN run out specifications
Female mounts have a through hole to accept aL/Handed retaining screw for chucks fitted withreverse
� A range of precision milledchuck keys to suit most powerdrills with chucks
�
�
�
�
Drill easily in confined areas
Interchangeable handle
10mm chuck with key
1:1 drive ratio
Code
HTC705006
HTC950284
Size
3/8" x 24 - 10mm
1/2" x 20 - 16mm
�
�
Easy to fit
Suitable for allportable andcordless powerdrills
�
�
Easy to fit
Suitable for allportable andcordless powerdrills
Code
MTS2230
MTS2245
MTS2250
Capacity
10mm
13mm
13mm
DRILL CHUCK & KEY
Thread
3/8" x 24UNF
3/8" x 24UNF
1/2" x 20UNF
DRILL CHUCK KEYLESS
Code
MTS2210
Capacity
13mm
Capacity
1/2" x 20UNF
DRILL CHUCK & KEY - 901325
Code
JAC1080
Capacity
13mm
Capacity Thread
1/2" x 20TPI
CHUCK KEYS ANGLE DRILL ATTACHMENT
Code
SHA0750
SHA0755
SHA0780
Size
10mm
13mm
4-in-1
Code
HON0230
Capacity
10mm
Hit
ach
i P
ow
er T
ools
,
Sp
ares &
Accessorie
s
591 Carbon Brush Selection Chart
CARBON BRUSH SELECTION CHART
Wear limit lineFigure
Stop pieceSpring
Black & Decker
Power Tools
Bla
ck &
Decker P
ow
er T
ools
592OUTLETS NATIONWIDE
Quick-find Index
Black & Decker Power ToolsBlack & Decker has been setting the
standard for innovation and design of
power tools since 1910. As the
inventor of the first portable electric
drill with pistol grip and trigger switch,
Cordless Range
594
593
Percussion HammerDrills
595
Angle Grinders
596
Polisher
596
Sanders
597
Jigsaw
597
Circular Saw
598
Router
598
Heat Gun
598
Black & Decker offers a broad line of
quality power tools used in and
around the home and for commercial
applications. When users need to get
work done, they trust Black & Decker
for the power tools that will do the job
efficiently and reliably.
Dustbusters
599
Work Bench
599
Bla
ck &
Decker P
ow
er T
ools
594Cordless Range
24 torque clutch - For perfect screwdriving into a variety of materials withdifferent screws sizes
Spring Loaded Slide Pack Battery System - For quick and easy batterychange and a more secure fit
Reverse switch for added versatility
Variable speed - For ultimate finger tip control for all drilling applications
Features
Voltage 14.4V
Battery type Detachable
Capacity 1.2Ah
Charge time 3hr
Chuck Keyless
Chuck size 10mm
Hammer No
Clutch positions 24
Specification
Code
STAEPC14CA-QW
�
�
�
�
�
Four-position rotating drive helps you access screws in hard-to-reachspaces
Easy-to-use lock/unlock makes it easy to adjust screw head position
Compact size for optimal control
LED work light illuminates work area
1/4” (6.4mm) universal hex chuck accepts the most commonaccessory bits
4.8V RECHARGEABLE SCREWDRIVER
Features
Specifications:
Voltage 4.8 V
No load speed 180RPM
Battery type NiMH
Bit holder size 6.35 mm
Max torque 4Nm
Code
STAPP360-QW
BNDPP360-QW
14.4V DRILL DRIVERBNDEPC14CA-QW
Bla
ck &
Decker P
ow
er T
ools
595
710W power suitable for home drilling
Hammer action suitable for drilling into
masonry
13mm, high quality keyed chuck
Variable speed offers more control and is
essential for screwdriving
Secondary handle to provide additional control
Lock on button for greater comfort
BNDCD714REK-AE 710W PERCUSSION HAMMER DRILL
Features
Power 710W
Voltage 230V
Chuck Keyed
Chuck size 13mm
Hammer Yes
Beats per minute 47600bpm
Max. Torque 4.5Nm
Max. capacity - wood 25mm
Specifications:
Code
STACD714REK-AE
450W power suitable for home drilling
Hammer action suitable for drilling into masonry
10mm, high quality keyed chuck
Lock on button for greater comfort
450W PERCUSSION HAMMER DRILL
Features
Power 450W
Voltage 230V
Chuck Keyed
Chuck size 10mm
Hammer Yes
Beats per minute 47600bpm
Max. Torque 3.7Nm
Max. capacity-wood 20mm
Specifications:
500W power suitable for home drilling
Hammer action suitable for drilling into masonry
13mm, high quality keyed chuck
Variable speed offers more control and is essential for screwdriving
Lock on button for greater comfort
500W PERCUSSION HAMMER DRILL
Features
Code
STAKR454-QS
Code
STAKR504RE-QS
BNDKR454-QS
BNDKR504RE-QS
Power 500W
Voltage 230V
Chuck Keyed
Chuck size 13mm
Hammer Yes
Beats per minute 47600bpm
Max. Torque 3.7Nm
Max. capacity - wood 20mm
Specifications:
Bla
ck &
Decker P
ow
er T
ools
Percussion Hammer Drills
596Angle Grinders/Polisher
115mm disc size - useful when working in confined spaces
900W motor provides an ideal balance between power,weight and size
2 position side handle for additional control and safety
Spindle lock makes accessory changing quick and easy
Tool free safety guard makes guard adjustment quick and easy
Lock on switch assists with comfort and control
900W 115MM SMALL ANGLE GRINDER
Features
Power 900W
Voltage 230V
Wheel diameter 115mm
No load speed 10000rpm
Configuation Body grip
Spindle size M14mm
Spindle lock Yes
Switch type Slider
Specifications:
230mm disc size is useful when a large depth of cut
is needed
3 position side handle adds additional
control and safety
Spindle lock makes accessory
changing quick and easy
Safety guard ensures safe operation of tool
3 metre cable allows access to most workareas without the need for an extensioncord
2000W 230MM LARGE ANGLE GRINDER
Features
Lock off trigger prevents accidental start-up
Power 2000W
Voltage 230V
Wheel diameter 230mm
Soft grip Yes
Soft start Yes
Adjustable gear case No
No load speed 6500rpm
Configuration End handle
Specifications:
Code
STAKG915-QS
Code
STAKG2000D-AE
BNDKG915-QS
BNDKG2000D-AE
�
�
�
�
�
�
�
Ideal for waxing and polishing furniture,automobiles and boats
Random orbit action for faster waxapplications and finishing quality
Front and end handle position for greatercontrol
Rubber grip provides comfort andprevents slipping
Dust-seal rubber on/off switch for longertool life
3 meter cable for optimum convenience
Includes:1Pc foam applicator bonnet2pc wool polishing bonnets
BNDKP600 RANDOM ORBIT WAXER/POLISHER - 60 WATT
Features
Specification
Power 60W
Orbits/Min 4,400 Rpm
Wheel diameter 150mm
Cable length 3 m
Code
STAKP600
Bla
ck &
Decker P
ow
er T
ools
597 Mouse Sander/Sheet Sander/Jigsaw
240W
Single
15000rpm
1.0mm
2.0mm
Orbital
92 x 230mm
91 x 189mm
Power
Speed
No load speed
Eccentricity
Orbit diameter
Sanding actions
Paper size
Platten size
Specification
55W
230V
Single
11000rpm
0.75mm
1.5mm
Vacuum adaptor
Quick fit
Power
Voltage
Speed
No load speed
Eccentricity
Orbit diameter
Dust extraction [sanders]
Paper attachment
Specifications:
• 3-stage pendulum action to increase cutting speed
• Variable speed trigger for increased control
• Universal blade clamp holds both U & T shank blades
• Integral dust blow feature clears the line of cut
• Integral dust extraction feature to keep the workarea clean
• Small, lightweight & compact industrial design
Features
• Auto Pressure Indicator indicates if you need to increase/decrease
the amount of pressure on the sander for optimal stock removal
• Versatile - Ideal for paint / varnish, cleaning glass, removing rust
and sanding in tight spaces
• Tear drop shaped base to access tight corners
• Removable tips allowing other profile tips to be added for
greater versatility
• Detail base is designed to give better results whensanding intricate areas
• Quick fit sanding paper or faster sanding actionand easier paper fitment
Features
• Compact power - Powerful 240W motorgets the job done quicker
• Compact design gets you closer to thework surface for greater control
• Large orbit size and high sander speedfor faster material removal
• Versatile - Third sheet base sands flush to 3 sides
• Lightweight sander with front and rear handlesfor maximum comfort and control
• Quick & easy paper change - hook & loopor traditional clip attachment
Features
Ideal for using on vertical surfaces such as doorsand walls, for light to medium sanding tasks
•
CodeSTAK168K-QS
CodeSTAKA310-QS
Code
STAKS700PE-QS
BNDKA168K-QS MOUSE ® DETAIL SANDER
BNDKA310-QS 240W 1/3 SHEET SANDER
BNDKS700PE-QS 480W VARIABLE SPEED PENDULUM JIGSAW
480W
230V
Variable
0-3000/min
No
Yes
0-45°
Yes
Power
Voltage
Speed
Strokes
Tool free blade clamp
'Lock on' switch
Bevel cut
Dust blower
Specification
Bla
ck &
Decker P
ow
er T
ools
598Circular Saw/Router/Heat Gun
�
�
�
�
�
�
�
�
�
1600W motor for long life and highperformance
Flat motor housing enables product to bestood upside down for easy bit change
Lock off trigger for enhanced safety
3 collets provided to suit shank sizesbelow 1/2" (6mm, 6.35mm and 8mm)
6 router bits included
Template guide
Edge guide
Copy follower
Distance plate for trimming verticalprojections
1/2"
ROUTER 1/2” 1600W
Features
CodeSTAKW1600EA-QS
�
�
�
�
�
�
�
65mm depth of cut for fast and accurate rip, crossand bevel cuts
Powerful 1300W motor for increased power andmaximum performance
Easy to set integral depth of cut adjustment
Rise and fall depth setting function for optimumcuttingperformance
Bale handle for added control and accuracy
Spindle lock for easy blade change
20 tooth TCT saw blade
Specification
Power 1300W
Voltage 230V
Depth of cut 65mm
No load speed 5,000rpm
Blade diameter 190mm
Bore size 16mm
Bevel cut 0-45°
Dust extraction Yes
Rip fence Yes
BNDKS1300-QS CIRCULAR SAW 1300W 65mm
Features
CodeSTAKS1300-QS
�
�
�
�
�
Essential tool for decorating orrefinishing
Pistol grip handle is wellbalanced for use over extendedperiods of time
Comes complete with a kit boxand a range of accessories
Performs many different taskswith three temperature settings
Lock- on switch for comfortable,hands free use
HEAT GUN 2000W
Features
Specifications:
Power 2000W
Voltage 230V
Heat settings Variable
Style Pistol
Temp range 50-600 ºC
Air flow <650 l/min
Cable length 3m
Kit box Yes
CodeSTAKX2000-ZA
BNDKW1600EA-QS
Specifications:
Power 1600 W
Voltage 230 V
Speed Variable
No load speed 11,000 – 28,000 rpm
Plunge depth 60mm
Collet size 6, 6.35, 8, 12.7mm
Maximum cutter dia 42mm
Spindle lock Yes
BNDKX2000ZA
Bla
ck &
Decker P
ow
er T
ools
599 Dustbusters/Workbench
Bla
ck &
Decker P
ow
er T
ools
3.6V
7.5W
225mm/Water
800l/min
286ml
7.5min
16 Hours
Loop
Voltage
Power (Air Watts)
Suction power
Air flow
Dustbowl capacity
Runtime
First time charge
Handle style
Specifications:
•
• Cordless technology - grab & go
• Wall mounted charging system
• Bayonet release system: Twist the bowl to open andeasily empty
• Ergonomic design for comfortable use
• Accessories conveniently stored underloop handle wherever you go they arealways on hand
Features
3.6V power is ideal for quick pick-up tasks around the home
Code
STANV3603-QE
�
�
�
�
�
�
Durable steel frame construction
Folds flat for compact storage and easytransport
Dual clamping cranks increaseclamping force and versatility
Adjustable swivel pegs and jawretention grooves provide clampingversatility and reliable material hold
Designed for easy set-up and clean-up
Rubber feet are anti-slip
Features Specifications:
Working height 760 mm
Folded size 630 x 890 x130 mm
Vice jaw opening 0 - 115 mm
Vice jaw length 610 mm
Max table width 341 mm(
Maximum load 160 kg
jaws open)
CodeSTAWM301-XJ
�
�
�
�
�
�
4,8V Power is ideal for general cleaningtasks around the home
Combined benefits of wet and drycleaning in one
New bayonet release system: twist thebowl to open
New wall hook: easier to change than everwith its integrated DC jack plug to chargedwhen stored
Special wet pick up accessory stored onboard for increased wet vacuumcapabilities
Ergonomic design for comfortable use
BNDNW4860-QW 4.8 V WET & DRY DUSTBUSTER VAC
Features Specifications:
Voltage 4.8V
Power (Air Watts) 9.6W
Suction Power 300mm/Water
Air Flow 815 l/min
Dustbowl Capacity 287 / Fluid 200ml
Run Time 8 min
Handle Style Loop
CodeSTANW4860-QW
BNDNV3603-QE 3.6V DUSTBUSTER ® HAND VAC
BNDWM301-XJ PORTABLE WORKBENCH
Recommended