How to restore WIFIBOT operating system from USB · it to recover ftination of Disk 3 isn Number of...

How to restore WIFIBOT operating system from USB

1) Insert the recovery usb key in a free usb port (This key is generated using acronis

software or given in the robot box with the default operating system)

2) Check that the bios can boot from usb (by default it is ok)

3) Wait until acronis start

4) Once started, Select Recover , My Disks

5) Browse for the image to recover

6) Select drive where the windows or linux image is (*.tib )

by default it is on the USB key D: , if not get it from www.wifibot.com

7) Select all partition to recover

8) Select drive where you want to restore (compact flash or satadom ssd)

9) Start the recovery

10) Wait until it finish and reboot pc

How to restore WIFIBOT operating system from a PC

Install acronis true image on a pc, plug your compact flash or ssd hard drive, using an usb

adapter to your pc. Follow the same instruction to restore the image.

On a pc you can create your own USB recovery key.

For this method please read acronis manual