Hybrid Curtain Wall Systems - · PDF fileThrough a global partnership between Tiltco and...

Hybrid Curtain Wall Systems

Global Partnership for a Sustainable Future

Through a global partnership between Tiltco and Sebnitzer-Fenster, two unique curtain wall systems are available to the North American market as well as Worldwide.

TITLCO manufactures a hybrid uPVC / Aluminum curtain wall system, the only one of its kind in North America. The Polytec 50 is one of the world’s most thermally efficient curtain walls.

Sebnitzer Fenster manufactures a wood/Aluminum curtain wall system. Utilizing most desired wood species, ST-THERMO curtain wall promotes sustainability and freedom of design to create an elegant fenestration solution.

Thermal InsulationA hot box test according to NFRC 102-2004 achieved aU value of 0.28 by using a 1" glass (3/16" clear - 0.66“Air space 90% Argon filled and a 3/16" low-e).

Mechanical PropertiesTILTCO's uPVC has been specifically formulated toachieve a very high impact resistance in a largetemperature range. Windows have been installed inAntarctica as well as Arizona.

DurabilityTiltco-uPVC special formulation for external use givesexcellent resistance to weathering and aging.

FireTiltco-uPVC is difficult to ignite and will self-extinguishwhen the source of heat is removed.

ChemicalTILTCO –uPVC is resistant to atmospheric pollution andarrange of acids and alkalis. The steel profiles, including The relevant fixings, are galvanized in accordance to DIN55928.

TILTCO POLYTEC 50 HYBRID CURTAIN WALL

System advantages for architects and clients

Reduction of heating costs because ofan U-Value of Uf = 1,3 W/m²K

Economical alternative to aluminium curtain walling systems

Integration of cost-effective TILTCO Window and Door Systems with similar U-Values

Slim construction depth because of steel reinforcement

Design variety because of profile and colour choice

Tested and certified systemIntegration of innovative technologies (Photovoltaik/ Solar power panels)

Ecological system solution

Sightlines & Aesthetics: ST-THERMOThe ST-THERMO timber curtain walls provide a optional variety of glazing technology for application on structural frames made of wood and aluminum capping , and available in all types of wood finishes from 50 mm width. For a sustainable and lasting function the consistent system design assures a strict separation between the structural and design levels made of wood and the functional components made of aluminum and EPDM.

Outstanding thermal insulation, gradually up to passive house quality with Uf = 0,7 W/m2K

Two aluminum base profile options: with or without guiding extension

Available in al type of wood finish and size profile from 50 mm width

Entire load compensation tested and approved by the Building testing Institute

Fast and simple installation of the base profile also possible with the use of an automatic screw gunSmooth screw fastening due to the aluminum screw channel

No components exposed directly to the exterior or into the wood

The particular advantages of ST-THERMO

4 Every material is used separate and is mechanically jointed

4 Return into the recycling circulation without any problems

SEBNITZER FENSTER + TILTCO RECYCLING

ST SystemWood Curtain Wall

ST System – Aluminum Clad Wood

ST System – Hybrid with Solar Panel Glazed

ST System – Wood Aluminum Clad Window Wall

ST System – Wood Aluminum Clad

ST System – Hybrid uPVC Steel Clad

Your Partners In Energy Saving Hybrid

Curtain Walling, Windows & Doors

North America: www.tiltco.net Europe: www.sebnitzer-fensterbau.de