View
217
Download
2
Category
Preview:
Citation preview
i-CHILLER
-10°C to 30°C | 1.7 TO 505kW
i-CHILLER COMPACT i-CHILLER i-CHILLER MAX
-10°C to 30°C
Process cooling duties from
7.2 to 233kW
19 sizes
-10°C to 20°C
Process cooling duties
243 to 505kW
8 sizes
0°C to 30°C
Process cooling duties from
1.7 to 4.7kW
4 sizes
EcoDesign compliant
Stock available immediately
Fast cusomisation of
standard models
Individually factory tested
Efficient R410A refrigerant
Up to 5-year warranty
3-Bar pump as standard
Dual Frequency (50/60HZ)
version 7 to 65kW
i-TEMP
-20°C to 400°C | Up to 1600kW
i-TEMP
Indirect and direct water, pressurised
water and oil TCUs up to 350°C
Heating capacities from 4 to 72kW
Cooling capacities from 23 to 600kW
i-TEMP COMPACT
Indirect and direct water TCUs up to
160°C
Heating capacities from 4 to 72kW
Cooling capacities from 23 to 600kW
i-TEMP MAX
Indirect and direct water, oil and thermal oil
TCUs up to 400°C
Electric heating capacities from 9 to 360kW
Steam heating capacities up to 1600kW
Cooling capacities from 92 to 1600kW
Standard and compact
version in stock and
available immediately
Fast customisation of
standard models
Advanced controller with
LCD screen
Interface options including
ethernet and profibus
Data capture to SD card
Flow manifold attachment for
greater temperature distribution
CHILLERS & FREE COOLING
-10°C to 20°C | 5kW to 4MW
DRY AIR COOLERS ADIABATIC COOLERS
Ambient Air Coolers with
Adiabatic Spray System 5kW to
4MW
Ambient Air Coolers 5kW to
4MW
APTUS IMPERIUM MAGNUS
Chiller with scroll compressors
-12°C to +20°C
25kW to 850kW
Chiller with fixed or variable
speed screw compressors
-12°C to +20°C
300kW to 4MW
Chiller with Turbocor compressor
+5°C to +18°C
750kW to 3.5MW
Versions available:
• Air Cooled
• Water Cooled
• Reversible Air
Cooled
• Reversible Water
Cooled
• Air Source
Simultaneous
Heating & Cooling
• Internal Air Cooled
• Partial Free Cooling
with or without glycol
• Full Free Cooling
with or without glycol
• Partial Heat
Recovery
• Full Heat Recovery
• Condenserless
• High / Extra High
Efficiency
• Low / Extra Low
Noise
• Alternative low-GWP
refrigerant choices
CHILLER REFRIGERANT SELECTION
R134a | R513A | R1234ze
✓ Best GWP✓ Best EER / ESEER✓ Heating @85Co Larger Footprinto Costs +15% appro Reduced Max Cap
✓ No Cost Penalty✓ No Cap / size penalty• Better GWPo EER -5% / ESEER -1%
✓ No Cost Penalty✓ No Cap / size penaltyo High GWP
✓ IMFA✓ MAFA
✓ IMDW✓ IMFW✓ IMFH
✓ MAFW
✓ IMFA✓ MAFA
✓ IMDW✓ IMFW✓ IMFH
✓ MAFW
✓ IMFA✓ MAFA✓ IMDW✓ IMFW✓ IMFH✓ MAFW
GOOD BETTER BEST
FREE COOLING
Free cooling utilises external ambient temperatures below your process operating temperature to reduce your energy costs by up to 70%.
Chillers with integrated free cooling provide efficiency with a smaller footprint. Dry Air Coolers provide bolt-on free cooling for even greater efficiency due to the larger surface area.
SPECIAL PROCESS TEMPERATURE CONTROL
Low temperature chillers to -40°C
Full turnkey solutions for
dimensional constraintsSpecification led projectsSpecial fluid chillers & TCUs
ATEX rated chillers & TCUsIn-house technical
expertise & design
Designed to meet your unique requirements and compliance standards
FULL TURNKEY PROJECTS
Your project delivered on time, on budget and hassle-free
Delivery, installation
and commissioning
Schematic drawings providedIntegration with BMSSystem design to meet your
exact requirements and budget
Dedicated Regional
Contract ManagerComprehensive site survey
PROJECT CONSIDERATIONS
Matching
design
loads
Water leaving
Temperature?Ambient Location
Noise
requirements
Capacity
control?
Comparing
equipment
Compressor type:
• Screw
• Scroll
• Centrifugal
Free
cooling
Energy analysis
/ Power
considerations
Contingency
planningSupport
INSTALLATION MANAGEMENT
Attend site survey to
confirm requirements
Site survey and Assessment of current
system
Product selection
System design and enabling
works assessed and costed
Quote presented for assessment
and approval
Site meeting with project manager
and appropriate site staff
RAMS and project Schedule submittal for
approval minimum two weeks prior to
commencement
Carry out all elements of installation
works, project manager to attend as
required at milestone points
Commission system upon
completion
Site visit for ’snagging’ if required
INSTALLATION
MANAGEMENT
Project documentation and sign off
COMMISSIONING
Factory trained &
qualified technicians
In-house technical & QHSE teamFully documented
SATs & FATs
Configured to meet your
exact requirements
Pre-commissioning water analysis100-point full electrical, mechanical
& hydraulic system commissioning
PPM & CONDITION BASED MONITORING
Remote monitoring &
contingency planning
Water treatment
Parts & Glycol
24/7 breakdown support
Energy efficient system
enhancements & energy monitoring
100+ point maintenance
program & tailored SLAs
Protecting your investment and minimising the risk of downtime
Benefit from:
Tailor a package to include:
Free
Technical
Support
Glycol
Check
Prioritised
Calls
24/7
Engineer
Availability
F-Gas
Compliance
Custom
Reporting
Remote
Monitoring
Thermal
Imaging
Tailored
Response
Times
Water
treatment
plan
PLANNED PREVENTATIVE MAINTENANCE
Water
quality
checks
Reduced
labourrates
Discounted
Spare Parts
& Labour
Extended
Warranty
Up to date
Maintenance
Log
• Experienced team of 45 fully qualified
Service Engineers
• Engineers located throughout UK and
Europe
• All Engineers are fully conversant with
current F-Gas Regulations, safe handling
of refrigerants, COSHH and Health &
Safety Risk Assessment Regulations
• Engineers on call 24/7
FULLY QUALIFIED ENGINEERS
• 24/7 Support for planned
and emergency projects (45
Service Engineers in the UK)
• National depots and regional
offices located throughout
Europe
• 270+ Employees throughout
Europe
LOCAL SUPPORT, NATIONWIDE NETWORK
COOLING HIRE PRODUCT RANGE
DRY AIR COOLERS
PORTABLE AIR
CONDITIONINGFAN COILS & FAN COILS LTAIR HANDLING UNITS
AIR & WATER CHILLERS COOLING TOWERS
HVAC & PROCESS
HIRE HEATING PRODUCT RANGE
DIESEL HEATERS
TCUsELECTRIC BOILERS
OIL, GAS & STEAM BOILERS FAN HEATERS
HVAC & PROCESS
FUEL TANKS
Tailored to your industry, application and operation...
Technical sales specialists
Full turnkey, energy efficient solutions
Process specific temperature control
Carbon Trust & Eurovent accredited with Eco-Design compliance
World-wide service engineer team coverage
COMPLETE TEMPERATURE CONTROL SOLUTIONS
Recommended