View
489
Download
12
Category
Preview:
Citation preview
ICS-60 CXP.08
HOP
UP
Always read through this manual before operation user restricted to 18 year of age or olderINSTRUCTIONSINSTRUCTIONS
1
ICS-60
Model
CXP
Weight Length Extend Bullet Velocity Caliber
2750g 595mm 695mm 6 mm BB450 Round450
90-100 M/S90-100 /
Retractable stock
Hand guard
Ejection cover assembly
Magazine catch button
Elevation dial(up,down)
Charging handle
Outer barrel
Front sling swivel
Sling clip
Bolt catch
Magazine Trigger guard
Pistol grip
Forward assist assembly
Front sight
Birdcage flashhider
Windage dial (Left,Right)Component names
CX
M4
P
2C
XM
4
P Compact Battery & Laser Module2-1
Battery
Insert wire into battery end tunnel
Mount laser set to right position and turn right to lock up
Combine both side cover and on right position Battery (not include)
( )
Battery fitting method(Handguard)Battery box fitting method
To fixed the front sling swivel
2-32-2
Connect battery to the receiver
Turn screw right to lock
Insert the battery under the barrel and connect the battery.
Release 2 pins can Remove the lower handguard
Manage battery wire and put off handguard.
3 4
5 6
7
Mount on battery box
2
2
3 4
( )
Selector lever setting
SAFEAUTO
SEMI
Open sight adjustment
Common/close-range/low-light shooting.Push forward to engage battle sight.
Precision daylight shooting.Push backward to engage peep hole.
Turn the dial forward to raise the hitting point.Turn the dial backward to lower the hitting point.
Rear sight precision targeting adjustment Rear sight up-down adjustment
Trun clockwise to aim right.urn counter clockwise to aim left.T
Rear sight left-right adjustment
Turn clockwise to raise B.B. hitting point.urn counter clockwise to lower B.B. hitting point.T
Front sight adjustment
Forward
Up
Backward
RightLeft
Counter clockwiseClockwise
SEMI
Fully automatic
SEMI
Semi automatic
AUTO
AUTO
AUTO
SAFE
SAFE
SAFE
SEMI
Safety setting
3 Ironsight adjustment
3-1 3-2
3-3
Down
Backward
Forward
CX
M4
P
Push the stock release lever to unlock. Adjust the 6 postition retractable stock to the most comfortable position.
Fine adjustment of gear engagement
Using a screw driver to fine tune the engagement between motor and gear.
Release 2 pins can remove hand guard
Forward assist knob
1.Push the forward assist knob to release the spring tension before storage.2.Push the forward assist knob before you assemble the gear box.
Make sure No.3 gear is turned to the correct positionbefore you reassemble the receiver/gearbox.
SEMI
SEMI O
X
4-1 4-2
4-4 4-5 4-6
4-3
Variable retractable stock length
Remove the lower handguard
Movable parts
4 Movable parts
The correct position of No.3 gear before reassembleing
Pull the charging handle to open the port cover
Forward assist knob can be
Trigger guard can beopened and closed
Trigger guard
Forward assist knob
Charging handle
CX
M4
P
Open the cover to loadBBs. Please use ICS 6mm caliber BBs for optimum Performance.
To charge BB feed spring, please wind magazine.
Magazine loading and unloading load BBs
Press the magazine release lever to load or unload the magazine.
AdjustmentPull back the charging handle this opens the bolt cover for adjustment of Hop-up unit.
Pull backward the charging handle opens the bolt covers for adjustment of Hop-up unit.
Port cover
Best trajectory
Decrease/low Hop
Increase Hop
6-15-1 5-2
Magazine5 Hop-up adjustment6 HOP-UP
CX
M4
P
To open upper receiver, use a screwdriver to push out frame lock pins.
Take the piston out.
Reassembly is the reverse of disassemblys procedures.
7-1
7-2
Disassemble Gear-box
Remove the upper Gearbox
Remove the lower Gearbox
7C
XM
4
P
Take out the screwson the plate.
Take the motor out.
2
2
Take out inner screw in the pistol grip.
3
Box
Take out magazine release lever.
Remove the gearbox
Take out the screwof wire from concavity.
5
64
MA-61
Description8-1
8C
XM
4
P
MA-27
MA-93
MA-22 MA-28
MA-25
MA-24
MA-21
MA-22
MA-23
MA-36
MC-61
MA-37
CXM4 P
MA-102
MA-96
MA-95
MA-98
MA-99
MA-100
MA-97
MA-101
CXM4 P
MA-31
MA-41
MA-30
MC-16
MA-94
MA-60
MA-09
MA-38
MA-42
MA-41
Recommended