View
258
Download
0
Category
Preview:
Citation preview
127
I C I
TM International Configurations, Inc. • P.O. Box 3374 • Enfield, Connecticut 06083 • TEL (860) 749-6380 • FAX (860) 749-2985
© 2004 International Configurations, Inc. Entire contents of this catalog copyrighted. www.InternationalConfig.com
INTERNATIONAL
IEC 60320WIRING DEVICES
128
IEC 60320 C-13 CONNECTORS2 Pole 3 Wire Grounding15 Ampere 250 Volt / 10 Ampere 250 Volt “CE” MARK
70°C
IEC 60320 C-13
57055-NS Connector body.Black thermoplastic, UL 94 V0.Compression (box type) terminals.Max. cord O.D. - External strain relief = 7 mm (0.276”)Max. cord O.D.- Internal cord grip = 10 mm (0.394”)Max conductor size accepted by terminals = 2.5 mm(14 AWG)Rating:15 Amp-250 Volt (UL/CSA),10 Amp-250 Volt (VDE)“CE” MARKConnector retaining clamp No. 81153 available (Use withNo. 57011 bolt-in type inlet only). Use clamp No. 81151 withNo. 57311 snap-in type inlet only.
Cat. No. Approvals Description
3, 20, 22
57055-NS
All dimensions are in millimeters (1 mm = 0.039")
57055-NSL 3, 20, 22
57055-M 3, 20
57070 3, 4, 9,13, 17,
18, 20, 22
Connector body.Black thermoplastic, UL 94 V0.Compression (box type) terminals.Max. cord O.D. - External strain relief = 8.5 mm (0.335”)Max. cord O.D.- Internal cord grip = 10 mm (0.394”)Max conductor size accepted by terminals = 2.5 mm(14 AWG)Rating:15 Amp-250 Volt (UL/CSA),10 Amp-250 Volt (VDE)“CE” MARKConnector retaining clamp No. 81153 available (Use withNo. 57011 bolt-in type inlet only). Use clamp No. 81151 withNo. 57311 snap-in type inlet only.
Connector body. Heavy duty.Black Nylon, 65°C.Dust/moisture seal provided at cord grip.Cord grip range = 9.0-16.5 mm (0.360-0.655”)Clamp type terminals accept 4.0 mm (12 AWG) conductorsRating: 15 Amp-125 Volt, 10 Amp-250 Volt
Connector body. Down angle design.Black thermoplastic, UL 94 V0.Screw terminals.Max. cord O.D. - External strain relief = 9 mm (0.354”)Max. cord O.D.- Internal cord grip = 10 mm (0.394”)Max conductor size accepted by terminals = 2.5 mm(14 AWG)Rating:15Amp-250Volt (UL/CSA),10Amp-250Volt(European)“CE” MARK
NOTE: See connector body No. 57070-A, page 129, forsimilar connector with compression type terminals.
Approvals: 1.ASTA 2.CEBEC 3.CSA 4.DEMKO 5.PSE(JET) 6.EANSW(DFT) 7.FI 8.GS 9.IMQ 10.JET 11.JIS 12.KEMA13.NEMKO 14.OVE 15.SAA 16.SABS 17.SEMKO 18.SEV 19.SII 20.UL 21.UTE 22.VDE 23.ISO 24.CCC 25.IRAM 26.BSI
I C I
TMInternational Configurations, Inc. • P.O. Box 3374 • Enfield, Connecticut 06083 • TEL (860) 749-6380 • FAX (860) 749-2985
© 2004 International Configurations, Inc. Entire contents of this catalog copyrighted. www.InternationalConfig.com
57055-NSL
57055-M
57070
21
28.7
61.587
8761.5
28.7
21
5272 36
DIA
27 37
49
81
129
IEC 60320 C-13 CONNECTORS2 Pole 3 Wire Grounding15 Ampere 250 Volt / 10 Ampere 250 Volt “CE” MARK
70°C
IEC 60320 C-13
57065-NSConnector body. Right angle.Black thermoplastic, UL 94 V0.Compression (box type) terminals.Max. cord O.D. - External strain relief = 7 mm (0.276”)Max. cord O.D.- Internal cord grip = 8 mm (0.315”)Max conductor size accepted by terminals = 2.5 mm(14 AWG)Rating:15 Amp-250 Volt (UL/CSA),10 Amp-250 Volt (VDE)“CE” MARK
Cat. No. ApprovalsDescription
3, 20, 22
All dimensions are in millimeters (1 mm = 0.039")
57065-NSL 3, 20, 22
57070-A 2, 4, 7,12, 13,14, 17,18, 22
Connector body. Right angle.Black thermoplastic, UL 94 V0.Compression (box type) terminals.Max. cord O.D. - External strain relief = 8.5 mm (0.335”)Max. cord O.D.- Internal cord grip = 10 mm (0.394”)Max conductor size accepted by terminals = 2.5 mm(14 AWG)Rating:15 Amp-250 Volt (UL/CSA),10 Amp-250 Volt (VDE)“CE” MARK
Connector body. Down angle.Black thermoplastic.Compression (box type) terminals.Max. cord O.D. - External strain relief = 8.5 mm (0.335”)Max. cord O.D.- Internal cord grip = 9 mm (0.354”)Max conductor size accepted by terminals = 2.5 mm(14 AWG)Rating: 10 Amp-250 Volt (VDE)“CE” MARK
I C I
TM International Configurations, Inc. • P.O. Box 3374 • Enfield, Connecticut 06083 • TEL (860) 749-6380 • FAX (860) 749-2985
© 2004 International Configurations, Inc. Entire contents of this catalog copyrighted. www.InternationalConfig.com
Approvals: 1.ASTA 2.CEBEC 3.CSA 4.DEMKO 5.PSE(JET) 6.EANSW(DFT) 7.FI 8.GS 9.IMQ 10.JET 11.JIS 12.KEMA13.NEMKO 14.OVE 15.SAA 16.SABS 17.SEMKO 18.SEV 19.SII 20.UL 21.UTE 22.VDE 23.ISO 24.CCC 25.IRAM 26.BSI
57065-NS
57065-NSL
57070-A
21
51
7044.5
7044.5
51
21
40
47
72
28
130
IEC 60320 C-15 CONNECTORS2 Pole 3 Wire Grounding15 Ampere 250 Volt / 10 Ampere 250 Volt “CE” MARK
120°C
IEC 60320 C-15
57050 Connector body.Black thermoplastic, UL 94 V0.Screw terminals.Max. cord O.D. - External strain relief = 9 mm (0.354”)Max. cord O.D.- Internal cord grip = 9 mm (0.354”)Max conductor size accepted by terminals = 1.5 mm(16 AWG)Rating:15 Amp-250 Volt (UL/CSA),10 Amp-250 Volt (VDE)“CE” MARKConnector retaining clamp No. 81156 available (Use withNo. 57011 bolt-in type inlet only).
Cat. No. Approvals Description
3, 14, 17,18, 20, 22
All dimensions are in millimeters (1 mm = 0.039")
57050-NS 1, 3, 20,22
57050-NSL 1, 3, 20,22
57050-A 4, 13, 14,17, 22
Connector body.Black thermoplastic, UL 94 V0.Compression (box type) terminals.Max. cord O.D. - External strain relief = 7 mm (0.276”)Max. cord O.D.- Internal cord grip = 10 mm (0.394”)Max conductor size accepted by terminals = 2.5 mm(14 AWG)Rating:15 Amp-250 Volt (UL/CSA),10 Amp-250 Volt (VDE)“CE” MARKConnector retaining clamp No. 81153 available (Use withNo. 57011 bolt-in type inlet only). Use clamp No. 81151 withNo. 57311 snap-in type inlet only.
Connector body.Black thermoplastic, UL 94 V0.Compression (box type) terminals.Max. cord O.D. - External strain relief = 8.5 mm (0.335”)Max. cord O.D.- Internal cord grip = 10 mm (0.394”)Max conductor size accepted by terminals = 2.5 mm(14 AWG)Rating:15 Amp-250 Volt (UL/CSA),10 Amp-250 Volt (VDE)“CE” MARKConnector retaining clamp No. 81153 available (Use withNo. 57011 bolt-in type inlet only). Use clamp No. 81151 withNo. 57311 snap-in type inlet only.
Connector body.Black thermoplastic.Compression (box type) terminals.Max. cord O.D. - External strain relief = 9 mm (0.354”)Max. cord O.D.- Internal cord grip = 10 mm (0.394”)Max conductor size accepted by terminals = 4.0 mm(12 AWG)Rating: 10 Amp-250 Volt (VDE)“CE” MARKConnector retaining clamp No. 81156 available (Use withNo. 57011 bolt-in type inlet only).
57050-M 3, 20 Connector body. Heavy duty.Black Nylon, 65°C.Dust/moisture seal provided at cord grip.Cord grip range = 9.0-16.5 mm (0.360-0.655”)Clamp type terminals accept 4.0 mm (12 AWG) conductorsRating: 15 Amp-125 Volt, 10 Amp-250 Volt
I C I
TMInternational Configurations, Inc. • P.O. Box 3374 • Enfield, Connecticut 06083 • TEL (860) 749-6380 • FAX (860) 749-2985
© 2004 International Configurations, Inc. Entire contents of this catalog copyrighted. www.InternationalConfig.com
Approvals: 1.ASTA 2.CEBEC 3.CSA 4.DEMKO 5.PSE(JET) 6.EANSW(DFT) 7.FI 8.GS 9.IMQ 10.JET 11.JIS 12.KEMA13.NEMKO 14.OVE 15.SAA 16.SABS 17.SEMKO 18.SEV 19.SII 20.UL 21.UTE 22.VDE 23.ISO 24.CCC 25.IRAM 26.BSI
57050
57050-NS
57050-NSL
57050-A
57050-M
21
31
8858
8761.5
28.7
21
8761.5
28.7
21
5884
20
30
7252
36DIA
131
IEC 60320 C-15 CONNECTORS2 Pole 3 Wire Grounding15 Ampere 250 Volt / 10 Ampere 250 Volt “CE” MARK
57060-NSConnector body. Right angle.Black thermoplastic, UL 94 V0.Compression (box type) terminals.Max. cord O.D. - External strain relief = 7 mm (0.276”)Max. cord O.D.- Internal cord grip = 10 mm (0.394”)Max conductor size accepted by terminals = 2.5 mm(14 AWG)Rating:15 Amp-250 Volt (UL/CSA),10 Amp-250 Volt (VDE)“CE” MARK
Cat. No. ApprovalsDescription
3, 20, 22
All dimensions are in millimeters (1 mm = 0.039")
57060-NSL 3, 20, 22
57060-A 7, 12, 13,17, 18, 22
Connector body. Right angle.Black thermoplastic, UL 94 V0.Compression (box type) terminals.Max. cord O.D. - External strain relief = 8.5 mm (0.335”)Max. cord O.D.- Internal cord grip = 10 mm (0.394”)Max conductor size accepted by terminals = 2.5 mm(14 AWG)Rating:15 Amp-250 Volt (UL/CSA),10 Amp-250 Volt (VDE)“CE” MARK
Connector body. Right angle.Black thermoplastic.Compression (box type) terminals.Max. cord O.D. - External strain relief = 8.5 mm (0.335”)Max. cord O.D.- Internal cord grip = 9 mm (0.354”)Max conductor size accepted by terminals = 2.5 mm(14 AWG)Rating: 10 Amp-250 Volt (VDE)“CE” MARK
120°C
IEC 60320 C-15
57075 3, 18, 20,22
Connector body. Left angle.Black thermoplastic.Screw terminals.Max. cord O.D. - External strain relief = 7 mm (0.276”)Max. cord O.D.- Internal cord grip = 7 mm (0.276”)Max conductor size accepted by terminals = 1.5 mm(16 AWG)Rating:15 Amp-250 Volt (UL/CSA),10 Amp-250 Volt (VDE)“CE” MARK
LEFT ANGLE CONNECTOR BODY
57085 2, 4, 12,13, 14,
17, 18, 22
Connector body. Down angle.Black thermoplastic.Compression (box type) terminals.Max. cord O.D. - External strain relief = 8.5 mm (0.335”)Max. cord O.D.- Internal cord grip = 9 mm (0.354”)Max conductor size accepted by terminals = 2.5 mm(14 AWG)Rating: 10 Amp-250 Volt (VDE)“CE” MARK
I C I
TM International Configurations, Inc. • P.O. Box 3374 • Enfield, Connecticut 06083 • TEL (860) 749-6380 • FAX (860) 749-2985
© 2004 International Configurations, Inc. Entire contents of this catalog copyrighted. www.InternationalConfig.com
Approvals: 1.ASTA 2.CEBEC 3.CSA 4.DEMKO 5.PSE(JET) 6.EANSW(DFT) 7.FI 8.GS 9.IMQ 10.JET 11.JIS 12.KEMA13.NEMKO 14.OVE 15.SAA 16.SABS 17.SEMKO 18.SEV 19.SII 20.UL 21.UTE 22.VDE 23.ISO 24.CCC 25.IRAM 26.BSI
57060-NS
57085
57060-NSL
57060-A
57075
7044.5
5133
21
5133
7044.5
21
19
2652
54
19.54028
47
72
6639
5334
20
132
IEC 60320 C-14 PLUGS2 Pole 3 Wire Grounding15 Ampere 250 Volt / 10 Ampere 250 Volt “CE” MARK
70°C
IEC 60320 C-14
57030-NSL Attachment plug.Black thermoplastic, UL 94 V0.Compression (box type) terminals.Max. cord O.D. - External strain relief = 8 mm (0.315”)Max. cord O.D.- Internal cord grip = 8 mm (0.315”)Max conductor size accepted by terminals = 2.5 mm(14 AWG)Rating:15 Amp-250 Volt (UL/CSA),10 Amp-250 Volt (VDE)“CE” MARKConnector retaining clamp No. 81154 available (Use withNo. 57120 bolt-in type outlet only). Use clamp No. 81155with No. 57320 snap-in type outlet only.
Cat. No. Approvals Description
3, 20, 22
All dimensions are in millimeters (1 mm = 0.039")
57030 3, 20, 22
57030-A 2, 7, 12,13, 14,17, 22
57035 3, 18, 20
Attachment plug.Black thermoplastic, UL 94 V0.Compression (box type) terminals.Max. cord O.D. - External strain relief = 7 mm (0.276”)Max. cord O.D.- Internal cord grip = 8 mm (0.315”)Max conductor size accepted by terminals = 2.5 mm(14 AWG)Rating:10 Amp-250 Volt (UL/CSA),10 Amp-250 Volt (VDE)“CE” MARKConnector retaining clamp No. 81154 available (Use withNo. 57120 bolt-in type outlet only). Use clamp No. 81155with No. 57320 snap-in type outlet only.
Attachment plug.Black thermoplastic.Compression (box type) terminals.Max. cord O.D. - External strain relief = 7 mm (0.276”)Max. cord O.D.- Internal cord grip = 10 mm (0.394”)Max conductor size accepted by terminals = 2.5 mm(14 AWG)Rating:10 Amp-250 Volt (VDE)“CE” MARKConnector retaining clamp No. 81159 available (Use withNo. 57120 bolt-in type outlet only).
Attachment plug.Black thermoplastic, UL 94 V0.Screw terminals.Max. cord O.D. - External strain relief = 8 mm (0.315”)Max. cord O.D.- Internal cord grip = 8 mm (0.315”)Max conductor size accepted by terminals = 2.5 mm(14 AWG)Rating:10 Amp-250 Volt (UL/CSA),6 Amp-250 Volt (SEV)“CE” MARKRight angle cable entry cover can be rotated to allow cableto exit at 90°, 180°, 270° or 360°.
I C I
TMInternational Configurations, Inc. • P.O. Box 3374 • Enfield, Connecticut 06083 • TEL (860) 749-6380 • FAX (860) 749-2985
© 2004 International Configurations, Inc. Entire contents of this catalog copyrighted. www.InternationalConfig.com
Approvals: 1.ASTA 2.CEBEC 3.CSA 4.DEMKO 5.PSE(JET) 6.EANSW(DFT) 7.FI 8.GS 9.IMQ 10.JET 11.JIS 12.KEMA13.NEMKO 14.OVE 15.SAA 16.SABS 17.SEMKO 18.SEV 19.SII 20.UL 21.UTE 22.VDE 23.ISO 24.CCC 25.IRAM 26.BSI
57035
57030-NSL
57030
57030-A
21.6
29
6085.5
21
29
81
21
29
5684
3538
47.5
75
133
IEC 60320 C-14 PLUGS2 Pole 3 Wire Grounding15 Ampere 250 Volt / 10 Ampere 250 Volt “CE” MARK
57040-NSLAttachment plug. Right angle.Black thermoplastic, UL 94 V0.Compression (box type) terminals.Max. cord O.D. - External strain relief = 8 mm (0.315”)Max. cord O.D.- Internal cord grip = 8 mm (0.315”)Max conductor size accepted by terminals = 2.5 mm(14 AWG)Rating:15 Amp-250 Volt (UL/CSA),10 Amp-250 Volt (VDE)“CE” MARK
Cat. No. ApprovalsDescription
3, 20, 22
All dimensions are in millimeters (1 mm = 0.039")
57040 3, 20, 22
57040-A 22
Attachment plug. Right angle.Black thermoplastic, UL 94 V0.Compression (box type) terminals.Max. cord O.D. - External strain relief = 7 mm (0.276”)Max. cord O.D.- Internal cord grip = 8 mm (0.315”)Max conductor size accepted by terminals = 2.5 mm(14 AWG)Rating:10 Amp-250 Volt (UL/CSA),10 Amp-250 Volt (VDE)“CE” MARK
Attachment plug. Right angle.Black thermoplastic.Compression (box type) terminals.Max. cord O.D. - External strain relief = 7 mm (0.276”)Max. cord O.D.- Internal cord grip = 10 mm (0.394”)Max conductor size accepted by terminals = 2.5 mm(14 AWG)Rating: 10 Amp-250 Volt (VDE)“CE” MARK
57045 3, 18, 20,22
Attachment plug. Left angle.Black thermoplastic.Screw type terminals.Max. cord O.D. - External strain relief = 7 mm (0.276”)Max. cord O.D.- Internal cord grip = 10 mm (0.394”)Max conductor size accepted by terminals = 2.5 mm(14 AWG)Rating:15 Amp-250 Volt (UL/CSA),10 Amp-250 Volt (VDE)“CE” MARK
LEFT ANGLE PLUG
70°C
IEC 60320 C-14
I C I
TM International Configurations, Inc. • P.O. Box 3374 • Enfield, Connecticut 06083 • TEL (860) 749-6380 • FAX (860) 749-2985
© 2004 International Configurations, Inc. Entire contents of this catalog copyrighted. www.InternationalConfig.com
Approvals: 1.ASTA 2.CEBEC 3.CSA 4.DEMKO 5.PSE(JET) 6.EANSW(DFT) 7.FI 8.GS 9.IMQ 10.JET 11.JIS 12.KEMA13.NEMKO 14.OVE 15.SAA 16.SABS 17.SEMKO 18.SEV 19.SII 20.UL 21.UTE 22.VDE 23.ISO 24.CCC 25.IRAM 26.BSI
57045
57040-NSL
57040
57040-A
47
7044.5
21
47
7044.5
21
4168
50
21
5226
19
55
134
57011 Power inlet. Screw on panel mount, frontor rear. Black thermoplastic, polyamid 6.6.Brass terminals, tin plated. Quick discon-nect terminals, 6.3 x 0.8 mm (.250" x .032").
Cat. No. Approvals Description
3, 4, 7, 9,12, 13,14, 17,
18, 20, 22
IEC 60320 C-14 INLETS2 Pole 3 Wire Grounding15 Ampere 250 Volt (UL / CSA); 10 Ampere 250 Volt (International) "CE" MARK
57311, 57313, 57315
Note: Snap-in models are available for1.0, 1.2, 2.0, 2.5 and 3.0 mm thick panels.Minimum quantity may apply.
57315 3, 4, 7, 9,12, 13,14, 17,
18, 20, 22
Same as inlet No. 57311 except with 3.5 x0.8 mm (.138" x .032") solder terminals.
57313 3, 4, 7, 9,12, 13,14, 17,
18, 20, 22
Same as inlet No. 57311 except with 4.8 x0.8 mm (.187" x .032") quick disconnectterminals.
57311 3, 4, 7, 9,12, 13,14, 17,
18, 20, 22
Power inlet. Snap-in panel mount for 1.5mm thick panels. Black thermoplastic,polyamid 6.6. Brass terminals, tin plated.Quick disconnect terminals, 6.3 x 0.8 mm(.250" x .032").
57015 3, 4, 7, 9,12, 13,14, 17,
18, 20, 22
Same as inlet No. 57011 except with 3.5 x0.8 mm (.138" x .032") solder terminals.
57013 Same as inlet No. 57011 except with 4.8 x0.8 mm (.187" x .032") quick disconnectterminals.
3, 4, 7, 9,12, 13,14, 17,
18, 20, 22
57011, 57013, 57015
TYPICAL
TYPICAL
40
R3MAX.
27.5 MIN.
MIN.20
M3
MOUNTING HOLE
3.5 DIA. THRU6.3 X 90 C'SINK
4048
23.5
23
28.5
R3MAX.
27.5 -0+0.2
20 +0.2-0
MOUNTING HOLE
25.5
28.5
1.5
30
23
All dimensions are in millimeters (1 mm = 0.039")
70°C
IEC 60320 C-14
I C I
TMInternational Configurations, Inc. • P.O. Box 3374 • Enfield, Connecticut 06083 • TEL (860) 749-6380 • FAX (860) 749-2985
© 2004 International Configurations, Inc. Entire contents of this catalog copyrighted. www.InternationalConfig.com
Approvals: 1.ASTA 2.CEBEC 3.CSA 4.DEMKO 5.PSE(JET) 6.EANSW(DFT) 7.FI 8.GS 9.IMQ 10.JET 11.JIS 12.KEMA13.NEMKO 14.OVE 15.SAA 16.SABS 17.SEMKO 18.SEV 19.SII 20.UL 21.UTE 22.VDE 23.ISO 24.CCC 25.IRAM 26.BSI
135
IEC 60320 C-14 INLETS2 Pole 3 Wire Grounding15 Ampere 250 Volt (UL / CSA); 10 Ampere 250 Volt (International) "CE" MARK
57620
Cat. No. ApprovalsDescription
57610
MOUNTING HOLE
MOUNTING HOLE
All dimensions are in millimeters (1 mm = 0.039")
Power inlet, right angle PC mount. Screwon panel mount from rear. Wave solderableand washable in aqueous solutions. Blackthermoplastic UL 94 V-O. Brass contacts,nickel plated. Terminals tin plated.
57610 3, 17, 18,20, 22
Power inlet, right angle PC mount. Screwon panel mount from rear. Wave solderableand washable in aqueous solutions. Blackthermoplastic, polyamid 6.6. Brass con-tacts, tin plated. Terminals silver, tin plated.
57620 3, 17, 18,20, 22
40 ±0.1530.3
3.6 DIA.
R5.9MAX.
22.5
+0.2
+0.2
40 ±0.1530.3
3.6 DIA.
R5.9MAX.
22.5
+0.2
+0.2
40 ±0.15
±0.19.7
9.05 +0.1-0.2
±0.05
±0.115.85
40 ±0.15
±0.5 3.4 DIA.4 PLCS.
3.524.349.6
14.2527.8
8.73.5
1.6 DIA.
3.6DIA.
PIN SPACING
7 ±0.05
7.3
40 ±0.15
±0.1
±0.05
3.5
8.7
25.531.45
3.4 DIA.4 PLCS.
3.5
27.8
49.6
±0.5
±0.1540
15.85 ±0.1 3.6DIA.
7 ±0.051.6DIA.
PIN SPACING
70°C
IEC 60320 C-14
I C I
TM International Configurations, Inc. • P.O. Box 3374 • Enfield, Connecticut 06083 • TEL (860) 749-6380 • FAX (860) 749-2985
© 2004 International Configurations, Inc. Entire contents of this catalog copyrighted. www.InternationalConfig.com
Approvals: 1.ASTA 2.CEBEC 3.CSA 4.DEMKO 5.PSE(JET) 6.EANSW(DFT) 7.FI 8.GS 9.IMQ 10.JET 11.JIS 12.KEMA13.NEMKO 14.OVE 15.SAA 16.SABS 17.SEMKO 18.SEV 19.SII 20.UL 21.UTE 22.VDE 23.ISO 24.CCC 25.IRAM 26.BSI
136
57715 Power entry module. Integral double pole(DPST) on/off switch. Screw mount fromfront or back. 0.187” x 0.32” (4.8 x 0.8 mm)quick connect terminals. Black UL 94 V-0thermoplastic body.15 Ampere - 250 Volt (UL/CSA)10 Ampere - 250 Volt (International)
Cat. No. Approvals Description
3, 17, 18,20, 22
IEC 60320 C-14 POWER ENTRY MODULES2 Pole 3 Wire Grounding15 Ampere 250 Volt (UL / CSA); 10 Ampere 250 Volt (International) "CE" MARK
57710
57715
All dimensions are in millimeters (1 mm = 0.039")
70°C
IEC 60320 C-14
MOUNTING HOLE
MOUNTING HOLE
57710 Power entry module. Integral single pole(SPST) on/off switch. Screw mount fromfront or back. 0.187” x 0.32” (4.8 x 0.8 mm)quick connect terminals. Black UL 94 V-0thermoplastic body.10 Ampere - 250 Volt (UL/CSA)10 Ampere - 250 Volt (International)
3, 17, 18,20, 22
I C I
TMInternational Configurations, Inc. • P.O. Box 3374 • Enfield, Connecticut 06083 • TEL (860) 749-6380 • FAX (860) 749-2985
© 2004 International Configurations, Inc. Entire contents of this catalog copyrighted. www.InternationalConfig.com
Approvals: 1.ASTA 2.CEBEC 3.CSA 4.DEMKO 5.PSE(JET) 6.EANSW(DFT) 7.FI 8.GS 9.IMQ 10.JET 11.JIS 12.KEMA13.NEMKO 14.OVE 15.SAA 16.SABS 17.SEMKO 18.SEV 19.SII 20.UL 21.UTE 22.VDE 23.ISO 24.CCC 25.IRAM 26.BSI
41.7
31.727.2
3.2 DIA. THRU6.3 X 90° C'SINK
2
30
59 51
M3 THRU(2) PLACES
-0.15+0.1542
R3 -0.2+0
-0+0.2
+0.2-027.5
51
3.2 DIA. THRU6.3 X 90° C'SINK
3644
4.2
2
34
35.5
±0.1
-0.2+0 31.5
M3
-0+0.2
+0.2-027.5
36
R2.5
137
57720
Cat. No. ApprovalsDescription
57725
MOUNTING HOLE
MOUNTING HOLE
All dimensions are in millimeters (1 mm = 0.039")
57725 3, 17, 18,20, 22
57720 3, 17, 18,20, 22
IEC 60320 C-14 POWER ENTRY MODULES2 Pole 3 Wire Grounding15 Ampere 250 Volt (UL / CSA); 10 Ampere 250 Volt (International) "CE" MARK
70°C
IEC 60320 C-14
Power entry module. Integral double pole(DPST) on/off switch. Snap-in mount.0.187” x 0.32” (4.8 x 0.8 mm) quick connectterminals. Black UL 94 V-0 thermoplasticbody.15 Ampere - 250 Volt (UL/CSA),10 Ampere - 250 Volt (International)
Power entry module. Integral single pole(SPST) on/off switch. Snap-in mount.0.187” x 0.32” (4.8 x 0.8 mm) quick connectterminals. Black UL 94 V-0 thermoplasticbody.10 Ampere - 250 Volt (UL/CSA),10 Ampere - 250 Volt (International)
Note: Snap-in models are available for1.0, 2.0 and 2.5 mm thick panels.Also available with illuminated switches.
I C I
TM International Configurations, Inc. • P.O. Box 3374 • Enfield, Connecticut 06083 • TEL (860) 749-6380 • FAX (860) 749-2985
© 2004 International Configurations, Inc. Entire contents of this catalog copyrighted. www.InternationalConfig.com
Approvals: 1.ASTA 2.CEBEC 3.CSA 4.DEMKO 5.PSE(JET) 6.EANSW(DFT) 7.FI 8.GS 9.IMQ 10.JET 11.JIS 12.KEMA13.NEMKO 14.OVE 15.SAA 16.SABS 17.SEMKO 18.SEV 19.SII 20.UL 21.UTE 22.VDE 23.ISO 24.CCC 25.IRAM 26.BSI
27.231.7
41.744.5
2
30
42
R3 -0.2+0
-0+0.2
+0.2-027.5
31.2
4.2
2
35.527.230
34
-0.2+0 31.5 -0
+0.2
+0.2-027.5
R2.5
138
IEC 60320 C-14 POWER ENTRY MODULES2 Pole 3 Wire Grounding10 Ampere 250 Volt (International); 10 Ampere 250 Volt (UL / CSA) "CE" MARK
57411, 57423, 57425
Cat. No. Approvals Description
57211 3, 4, 7, 9,12, 13,14, 17,
18, 20, 22
Note: Snap-in models are available for1.0, 1.2, 2.0, 2.5 and 3.0 mm thick panels.
Same as power entry module No. 57411except with 3.5 x 0.8 mm (.138" x .032")solder terminals.
57425 3, 4, 7, 9,12, 13,14, 17,
18, 20, 22
Same as power entry module No. 57411except with 4.8 x 0.8 mm (.187" x .032")quick disconnect terminals.
57423 3, 4, 7, 9,12, 13,14, 17,
18, 20, 22
Power entry module, single pole. Snap-inmount for 1.5 mm thick panels. Blackthermoplastic, polyamid 6.6. Brass nickelplated terminals and contacts. Fuse drawerfor 5 x 20 mm fuse and spare fuse compart-ment. Quick disconnect terminals, 6.3 x 0.8mm (.250" x .032").
57411 3, 4, 7, 9,12, 13,14, 17,
18, 20, 22
Same as power entry module No. 57211except with 3.5 x 0.8 mm (.138" x .032")solder terminals.
57215 3, 4, 7, 9,12, 13,14, 17,
18, 20, 22
Same as power entry module No. 57211except with 4.8 x 0.8 mm (.187" x .032")quick disconnect terminals.
57213 3, 4, 7, 9,12, 13,14, 17,
18, 20, 22
57211, 57213, 57215
MOUNTING HOLE
MOUNTING HOLE
TYPICAL
TYPICAL
All dimensions are in millimeters (1 mm = 0.039")
M3
30.5 -0+0.2
+0.2-027.5
R3MAX.
36
R3MAX.
27.5 +0.2
+0.2-031.5
-0
FUSE
30
34
1.5
28.525.5
FUSE
3644 28.5
2.5
34
23.5
3.5 DIA. THRU6.3 X 90° C'SINK
Power entry module, single pole. Screwon panel mount, front or rear. Blackthermoplastic, polyamid 6.6. Brass nickelplated terminals and contacts. Fuse drawerfor 5 x 20 mm fuse and spare fuse compart-ment. Quick disconnect terminals, 6.3 x 0.8mm (.250" x .032").
70°C
IEC 60320 C-14
I C I
TMInternational Configurations, Inc. • P.O. Box 3374 • Enfield, Connecticut 06083 • TEL (860) 749-6380 • FAX (860) 749-2985
© 2004 International Configurations, Inc. Entire contents of this catalog copyrighted. www.InternationalConfig.com
Approvals: 1.ASTA 2.CEBEC 3.CSA 4.DEMKO 5.PSE(JET) 6.EANSW(DFT) 7.FI 8.GS 9.IMQ 10.JET 11.JIS 12.KEMA13.NEMKO 14.OVE 15.SAA 16.SABS 17.SEMKO 18.SEV 19.SII 20.UL 21.UTE 22.VDE 23.ISO 24.CCC 25.IRAM 26.BSI
139
57510Power inlet with single pole fuseholder.Screw on panel mount, front or rear. Blackfiberglass reinforced thermoplastic (PETP)UL 94 V-O. Brass contacts, nickel plated.Brass terminals, silver and tin plated. Quickdisconnect terminals, 4.8 x 0.8 mm(.187" x .032").Fuse drawers listed below. Order separatefrom power inlets.
Cat. No. ApprovalsDescription
3, 17, 18,20, 22
FUSEDRAWERS FOR POWER INLETS5 x 20 mm 5 x 20 mm 1-POLE + SPARE 2-POLE BLACK w/
1-POLE BLACK 2-POLE BLACK FUSE CASE shorting bar in the neutral side
Standard 57551 57561 57571 57581* Medical 57552 57562 57572 57582* Standards: IEC 601-1, BS 5724 part 1, DIN/VDE 0750 part 1 (for medical applications)
57540 3, 17, 18,20, 22
Power inlet with double pole fuseholder.Snap-in panel mount. Black fiberglassreinforced thermoplastic (PETP) UL 94V-O. Brass contacts, nickel plated. Brassterminals, silver and tin plated. Quickdisconnect terminals, 4.8 x 0.8 mm(.187" x .032").Snap-in mount to 1.5 mm thick panels.Snap-in models available for 2.0 mm and2.5 mm thick panels. Contact Factory.Fuse drawers listed below. Order separatefrom power inlets.
57530Power inlet with single pole fuseholder.Snap-in panel mount. Black fiberglassreinforced thermoplastic (PETP) UL 94V-O. Brass contacts, nickel plated. Brassterminals, silver and tin plated. Quickdisconnect terminals, 4.8 x 0.8 mm(.187" x .032").Snap-in mount to 1.5 mm thick panels.Snap-in models available for 2.0 mm and2.5 mm thick panels. Contact Factory.Fuse drawers listed below. Order separatefrom power inlets.
3, 17, 18,20, 22
57520 3, 17, 18,20, 22
Power inlet with double pole fuseholder.Screw on panel mount, front or rear. Blackfiberglass reinforced thermoplastic (PETP)UL 94 V-O. Brass contacts, nickel plated.Brass terminals, silver and tin plated. Quickdisconnect terminals, 4.8 x 0.8 mm(.187" x .032").Fuse drawers listed below. Order separatefrom power inlets.
IEC 60320 C-14 POWER ENTRY MODULES2 Pole 3 Wire Grounding10 Ampere 250 Volt (International); 10 Ampere 250 Volt (UL / CSA) "CE" MARK
70°C
IEC 60320 C-14
57530, 57540
57510, 57520
MOUNTING HOLE
TYPICAL
MOUNTING HOLE
TYPICAL
±0.1
-0.2+0 31.5
M3
-0+0.2
+0.2-027.5
36
R2.5
3.2 DIA. THRU6.3 X 90° C'SINK
FUSE
3644
34
40.54.2
2
-0.2+0 31.5 -0
+0.2
+0.2-027.5
R2.5
FUSE
40.54.2
2
34
30
I C I
TM International Configurations, Inc. • P.O. Box 3374 • Enfield, Connecticut 06083 • TEL (860) 749-6380 • FAX (860) 749-2985
© 2004 International Configurations, Inc. Entire contents of this catalog copyrighted. www.InternationalConfig.com
Approvals: 1.ASTA 2.CEBEC 3.CSA 4.DEMKO 5.PSE(JET) 6.EANSW(DFT) 7.FI 8.GS 9.IMQ 10.JET 11.JIS 12.KEMA13.NEMKO 14.OVE 15.SAA 16.SABS 17.SEMKO 18.SEV 19.SII 20.UL 21.UTE 22.VDE 23.ISO 24.CCC 25.IRAM 26.BSI
140
57320, 57345, 57330
Cat. No. Description
57120, 57125, 57130
Power outlet. Screw on panel mount, frontor rear. Black thermoplastic, polyamid 6.6.Brass terminals, tin plated. Quick discon-nect terminals, 6.3 x 0.8 mm (.250" x .032").Models available with shuttered contacts.
Same as power outlet No. 57320 exceptwith 3.5 x 0.8 mm (.138" x .032") solderterminals.
Note: Snap-in models are available for1.0, 1.2, 2.0, 2.5 and 3.0 mm thick panels.
Same as power outlet No. 57320 exceptwith 4.8 x 0.8 mm (.187" x .032") quickdisconnect terminals.
57330 3, 7, 9,12, 13,14, 17,
18, 20, 22
57345 3, 7, 9,12, 13,14, 17,
18, 20, 22
Power outlet. Snap-in panel mount for 1.5mm thick panels. Black thermoplastic,polyamid 6.6. Brass contacts, tin plated.Brass terminals, tin plated. Quick discon-nect terminals, 6.3 x 0.8 mm (.250" x .032").
57320 3, 7, 9,12, 13,14, 17,
18, 20, 22
Same as power outlet No. 57120 exceptwith 3.5 x 0.8 mm (.138" x .032") solderterminals.
57130 3, 7, 9,12, 13,14, 17,
18, 20, 22
Same as power outlet No. 57120 exceptwith 4.8 x 0.8 mm (.187" x .032") quickdisconnect terminals.
57125 3, 7, 9,12, 13,14, 17,
18, 20, 22
57120 3, 7, 9,12, 13,14, 17,
18, 20, 22
Approvals
IEC 60320 C-13 OUTLETS2 Pole 3 Wire Grounding15 Ampere 250 Volt (UL / CSA); 10 Ampere 250 Volt (International) "CE" MARK
70°C
IEC 60320 C-13
MOUNTING HOLE
MOUNTING HOLE
TYPICAL
TYPICAL
All dimensions are in millimeters (1 mm = 0.039")
-0
32.540
24.8+0.2R4MAX.
M3
4050 30.5
27.5
28
3.5 DIA. THRU6.3 X 90° C'SINK
-0
32.5
24.8+0.2R4MAX.
28
35 30.5
27.5
1.5
I C I
TMInternational Configurations, Inc. • P.O. Box 3374 • Enfield, Connecticut 06083 • TEL (860) 749-6380 • FAX (860) 749-2985
© 2004 International Configurations, Inc. Entire contents of this catalog copyrighted. www.InternationalConfig.com
Approvals: 1.ASTA 2.CEBEC 3.CSA 4.DEMKO 5.PSE(JET) 6.EANSW(DFT) 7.FI 8.GS 9.IMQ 10.JET 11.JIS 12.KEMA13.NEMKO 14.OVE 15.SAA 16.SABS 17.SEMKO 18.SEV 19.SII 20.UL 21.UTE 22.VDE 23.ISO 24.CCC 25.IRAM 26.BSI
141
Cat. No. ApprovalsDescription
57640
57630
IEC 60320 C-13 OUTLETS2 Pole 3 Wire Grounding15 Ampere 250 Volt (UL / CSA); 10 Ampere 250 Volt (International) "CE" MARK
MOUNTING HOLE
MOUNTING HOLE
All dimensions are in millimeters (1 mm = 0.039")
Power outlet, right angle PC mount.Screw on panel mount from rear. Wavesolderable and washable in aqueoussolutions. Black thermoplastic UL 94 V-O.Brass contacts, tin plated. Brass terminals,tin plated.
57630 3, 17, 18,20, 22
Power outlet, surface mount design.Black thermoplastic. Quick disconnectterminals, 6.3 x 0.8 mm (.250" x .032").
57640 3, 4, 13,17, 18, 20
3.45 DIA.2 HOLES
26.4
4033.9
7.8 RMAX.
43.5 DIA.4 HOLES
15.1
40
77
8.7
2538.2
3.2
40
15.930.3
49.6
1.63DIA.
3.45DIA.
3.0 DIA. THRU5.5 x 90° C'SINK
223545 35
24
M3 - 2 PLCS.
R2MAX
3524
17
70°C
IEC 60320 C-13
I C I
TM International Configurations, Inc. • P.O. Box 3374 • Enfield, Connecticut 06083 • TEL (860) 749-6380 • FAX (860) 749-2985
© 2004 International Configurations, Inc. Entire contents of this catalog copyrighted. www.InternationalConfig.com
Approvals: 1.ASTA 2.CEBEC 3.CSA 4.DEMKO 5.PSE(JET) 6.EANSW(DFT) 7.FI 8.GS 9.IMQ 10.JET 11.JIS 12.KEMA13.NEMKO 14.OVE 15.SAA 16.SABS 17.SEMKO 18.SEV 19.SII 20.UL 21.UTE 22.VDE 23.ISO 24.CCC 25.IRAM 26.BSI
142
Cat. No. Description
Combination power outlet-inlet. Snap-inmount. Black thermoplastic, polyamid 6.6.Brass terminals, nickel plated. Quickdisconnect terminals, 4.8 x 0.8 mm(.187" x .032").Ground terminals NOT connected.
57350 3, 17, 18,20, 22
Approvals
IEC 60320 C-13 / C-14 OUTLET-INLET2 Pole 3 Wire Grounding10 Ampere 250 Volt (Int'l); 10 Ampere 250 Volt (UL / CSA), "CE" MARK
IEC 60320 C-13 / C-14
70°C
MOUNTING HOLE
57350, 57355
Combination power outlet-inlet. Snap-inmount. Black thermoplastic, polyamid 6.6.Brass terminals, nickel plated. Quickdisconnect terminals, 4.8 x 0.8 mm(.187" x .032").Ground terminals are connected.
57355 3, 17, 18,20, 22
33 +0.5
X
R2
-0
A
32.5
52
35 28.7
A = 0.8 - 1.2, X = 50.3A = 1.3 - 2.0, X = 50.5
I C I
TMInternational Configurations, Inc. • P.O. Box 3374 • Enfield, Connecticut 06083 • TEL (860) 749-6380 • FAX (860) 749-2985
© 2004 International Configurations, Inc. Entire contents of this catalog copyrighted. www.InternationalConfig.com
Approvals: 1.ASTA 2.CEBEC 3.CSA 4.DEMKO 5.PSE(JET) 6.EANSW(DFT) 7.FI 8.GS 9.IMQ 10.JET 11.JIS 12.KEMA13.NEMKO 14.OVE 15.SAA 16.SABS 17.SEMKO 18.SEV 19.SII 20.UL 21.UTE 22.VDE 23.ISO 24.CCC 25.IRAM 26.BSI
143
Cat. No. ApprovalsDescription
IEC 60320 C-16 INLETS2 Pole 3 Wire Grounding15 Ampere 250 Volt (UL / CSA); 10 Ampere 250 Volt (International) "CE" MARK
120°C
IEC 60320 C-16
57321, 57325, 57323
57021, 57025, 57023
TYPICAL
All dimensions are in millimeters (1 mm = 0.039")
57021 3, 4, 7,12, 13,14, 17,
18, 20, 22
57323 3, 4, 7,12, 13,14, 17,
18, 20, 22
57325 3, 4, 7,12, 13,14, 17,
18, 20, 22
57321 3, 4, 7,12, 13,14, 17,
18, 20, 22
57023 3, 4, 7,12, 13,14, 17,
18, 20, 22
57025 3, 4, 7,12, 13,14, 17,
18, 20, 22
Power inlet. Screw on panel mount, frontor rear. Black thermoplastic, polyamid 6.6.Brass terminals and contacts, tin plated.Quick disconnect terminals, 6.3 x 0.8 mm(.250" x .032").
Note: Snap-in models are available for1.0, 1.2, 2.0, 2.5 and 3.0 mm thick panels.
Same as inlet No. 57321 except with 3.5 x0.8 mm (.138" x .032") solder terminals.
Same as inlet No. 57321 except with 4.8 x0.8 mm (.187" x .032") quick disconnectterminals.
Power inlet. Snap-in panel mount for 1.5mm thick panels. Black thermoplastic,polyamid 6.6. Brass terminals and contacts,tin plated. Quick disconnect terminals, 6.3 x0.8 mm (.250" x .032").
Same as inlet No. 57021 except with 3.5 x0.8 mm (.138" x .032") solder terminals.
Same as inlet No. 57021 except with 4.8 x0.8 mm (.187" x .032") quick disconnectterminals.
MOUNTING HOLE
40
R3MAX.
27.5 MIN.
MIN.20
M3
TYPICAL
3.5 DIA. THRU6.3 X 90 C'SINK
4048
23.5
23
28.5
2.5
MOUNTING HOLE
-0+0.220
+0.2-027.5
R3MAX.
25.5
28.5
1.5
30
23
I C I
TM International Configurations, Inc. • P.O. Box 3374 • Enfield, Connecticut 06083 • TEL (860) 749-6380 • FAX (860) 749-2985
© 2004 International Configurations, Inc. Entire contents of this catalog copyrighted. www.InternationalConfig.com
Approvals: 1.ASTA 2.CEBEC 3.CSA 4.DEMKO 5.PSE(JET) 6.EANSW(DFT) 7.FI 8.GS 9.IMQ 10.JET 11.JIS 12.KEMA13.NEMKO 14.OVE 15.SAA 16.SABS 17.SEMKO 18.SEV 19.SII 20.UL 21.UTE 22.VDE 23.ISO 24.CCC 25.IRAM 26.BSI
144
All dimensions are in millimeters (1 mm = 0.039")
Cat. No. Description
C-8 power inlet. Screw mount. Blackthermoplastic. UL 94 V-O, PBT (30%Glassfiber). Solder terminals 1.5 x 2.3 mm."CE" MARK
57701 3, 13, 17,18, 20, 22
Approvals
IEC 60320 C-7 AND C-8 CLASS II2 Pole 2 Wire, 2.5 Ampere 250 Volt
IEC 60320 C-7, C-8
70°C
2835 21
6.5
15
57701
NEMA 1-15P detachable cord set. 1.8meters long. Black. Rated 2.5 ampere 250volt. C-7 connector and NEMA 1-15 plug.
80900 3, 20
84900 6 Australian detachable cord set. 1.8meters long. Black. Rated 2.5 ampere 250volt. C-7 connector and Australian plug.
United Kingdom detachable cord set. 1.8meters long. Black. Rated 2.5 ampere 250volt. C-7 connector and BS 1363A plug.
83900 1
Europlug detachable cord set. 1.8 meterslong. Black. Rated 2.5 ampere 250 volt.C-7 connector and CEE 7 / 16 plug.
81900 22
57703 3, 13, 17,18, 20, 22
C-8 power inlet. Snap-in mount. Blackthermoplastic. UL 94 V-O, PBT (30%Glassfiber). Solder terminals 1.5 x 2.3 mm."CE" MARK
81900
22.52.5
28
16
57703
57702
57702 3, 17, 20,22
C-7 outlet. Bolt in. Panel mount. Blackthermoplastic. Solder terminals."CE" MARK
Cat. No. Description
C-6 power inlet. Screw mount front or rear.UL 94 V-O rated black thermoplastic.Solder terminals."CE" MARK
57705 3, 4, 13,17, 18,20, 22
Approvals
IEC 60320 C-6 INLET2 Pole 2 Wire, 2.5 Ampere 250 Volt
IEC 60320 C-5, C-6
70°C
57705
All dimensions are in millimeters (1 mm = 0.039")
I C I
TMInternational Configurations, Inc. • P.O. Box 3374 • Enfield, Connecticut 06083 • TEL (860) 749-6380 • FAX (860) 749-2985
© 2004 International Configurations, Inc. Entire contents of this catalog copyrighted. www.InternationalConfig.com
Approvals: 1.ASTA 2.CEBEC 3.CSA 4.DEMKO 5.PSE(JET) 6.EANSW(DFT) 7.FI 8.GS 9.IMQ 10.JET 11.JIS 12.KEMA13.NEMKO 14.OVE 15.SAA 16.SABS 17.SEMKO 18.SEV 19.SII 20.UL 21.UTE 22.VDE 23.ISO 24.CCC 25.IRAM 26.BSI
50 3229
25 16
40
3921.530
22.5 20.5
19 17.5
90035
IEC 60320 jumper cord. C-14 plug, C-5connector. 10A-250V, 2.5A-250V 18/3AWG, SJT, 105°C / 1.0 mm H05VV-F.Black. 1.8 meters (6 foot). UL, CSA, VDEapprovals. “CE” Mark.NOTE: See cord set section pages 14-26for mating detachable cords for use invarious countries.
90035 3, 20, 22
“CE” MARK
NOTE: See cord set section pages 14-26for mating detachable cords for use invarious countries.
145
IEC 60320 C-19 CONNECTORS2 Pole 3 Wire Grounding20 Ampere 250 Volt (UL / CSA); 16 Ampere 250 Volt (International) "CE" MARK
57090Connector body.Black thermoplastic.Screw terminals.Max. cord O.D. - External strain relief = 9 mm (0.354”)Max. cord O.D.- Internal cord grip = 10 mm (0.394”)Max conductor size accepted by terminals = 4.0 mm(12 AWG)Rating: 20 Amp-250 Volt (UL/CSA),16 Amp-250 Volt (VDE)Connector retaining clamp No. 81154 available (Usewith No. 57081 bolt-in type inlet only).Right angle connector available. Cat.# 57090-RA
Cat. No. ApprovalsDescription
3, 18, 20,22
All dimensions are in millimeters (1 mm = 0.039")
57090-A 3, 20
57090-V 3, 20
Connector body.Black thermoplastic.Screw terminals.Max. cord O.D. - External strain relief = 9 mm (0.354”)Max. cord O.D.- Internal cord grip = 11 mm (0.433”)Max conductor size accepted by terminals = 4.0 mm(12 AWG)Rating: 20 Amp-250 Volt (UL/CSA)“CE” MARKConnector retaining clamp No. 81115 available (Usewith No. 57081 bolt-in type inlet only).
Connector body.Black thermoplastic, 65°C.Compression terminals.Max. cord O.D. - External strain relief = 12 mm (0.472”)Max. cord O.D.- Internal cord grip = 12 mm (0.472”)Max conductor size accepted by terminals = 4.0 mm(12 AWG)Rating: 20 Amp-250 Volt (UL/CSA)Connector retaining clamp No. 81115 available (Usewith No. 57081 bolt-in type inlet only).
70°C
IEC 60320 C-19
57091 22Connector body.Black rubber.Screw terminals.Max. cord O.D. - External strain relief = 11 mm (0.433”)Max. cord O.D.- Internal cord grip = 9 mm (0.354”)Max conductor size accepted by terminals = 2.5 mm(14 AWG)Rating: 16 Amp-250 Volt (VDE)“CE” MARK
I C I
TM International Configurations, Inc. • P.O. Box 3374 • Enfield, Connecticut 06083 • TEL (860) 749-6380 • FAX (860) 749-2985
© 2004 International Configurations, Inc. Entire contents of this catalog copyrighted. www.InternationalConfig.com
Approvals: 1.ASTA 2.CEBEC 3.CSA 4.DEMKO 5.PSE(JET) 6.EANSW(DFT) 7.FI 8.GS 9.IMQ 10.JET 11.JIS 12.KEMA13.NEMKO 14.OVE 15.SAA 16.SABS 17.SEMKO 18.SEV 19.SII 20.UL 21.UTE 22.VDE 23.ISO 24.CCC 25.IRAM 26.BSI
57090
57091
57090-A
57090-V
57090-M
Connector body. Heavy duty.Black Nylon, 65°C.Dust/moisture seal provided at cord grip.Cord grip range = 9.0-16.5 mm (0.360-0.655”)Clamp type terminals accept 4.0 mm (10 AWG) conductorsRating: 20 Amp-250 Volt (UL/CSA)
57090-M 3, 20
98
32
63
25 24
69
28
36
84
5272 36
DIA
446545
58
30
9257
23 21
NOTE: See pages 38-39 for moldedcord sets with C-19/C-20 connectors.
146
IEC 60320 C-20 PLUGS2 Pole 3 Wire Grounding20 Ampere 250 Volt (UL / CSA); 16 Ampere 250 Volt (International) "CE" MARK
70°C
IEC 60320 C-20
57110 Attachment plug.Black thermoplastic.Screw terminals.Max. cord O.D. - External strain relief = 9 mm (0.354”)Max. cord O.D.- Internal cord grip = 10 mm (0.394”)Max conductor size accepted by terminals = 4.0 mm(12 AWG)Rating: 20 Amp-250 Volt (UL/CSA),16 Amp-250 Volt (VDE)“CE” MARKConnector retaining clamp No. 81154 available (Usewith No. 57100 bolt-in type inlet only).Right angle plug available. Cat. # 57110-RA
Cat. No. Approvals Description
3, 18, 20,22
All dimensions are in millimeters (1 mm = 0.039")
57110-V 3, 20 Attachment plug.Black thermoplastic, 65°C.Compression terminals.Max. cord O.D. - External strain relief = 12 mm (0.472”)Max. cord O.D.- Internal cord grip = 12 mm (0.472”)Max conductor size accepted by terminals = 4.0 mm(12 AWG)Rating: 20 Amp-250 Volt (UL/CSA)
I C I
TMInternational Configurations, Inc. • P.O. Box 3374 • Enfield, Connecticut 06083 • TEL (860) 749-6380 • FAX (860) 749-2985
© 2004 International Configurations, Inc. Entire contents of this catalog copyrighted. www.InternationalConfig.com
Approvals: 1.ASTA 2.CEBEC 3.CSA 4.DEMKO 5.PSE(JET) 6.EANSW(DFT) 7.FI 8.GS 9.IMQ 10.JET 11.JIS 12.KEMA13.NEMKO 14.OVE 15.SAA 16.SABS 17.SEMKO 18.SEV 19.SII 20.UL 21.UTE 22.VDE 23.ISO 24.CCC 25.IRAM 26.BSI
57110
57110-V
26
5893
33
35
8570
37
NOTE: See pages 38-39 for molded cord sets with C-19/C-20 connectors.
147
57080
Cat. No. ApprovalsDescription
57081, 57082
MOUNTING HOLE
MOUNTING HOLE
TYPICAL
All dimensions are in millimeters (1 mm = 0.039")
Power inlet, IEC 60320 C-20. Screw onpanel mount. Black thermoplastic. Brassterminals and contacts, nickel plated. Screw/ compression terminals.
UL / CSA rated: 20 ampere 125 volt
20 ampere 250 voltVDE rated: 16 ampere 250 volt
Power inlet, IEC 60320 C-20. Screw onpanel mount. Black thermoplastic, UL 94 V-O. Brass terminals and contacts, nickelplated. Quick disconnect terminals, 6.3 x0.8 mm (.250" x .032").
UL / CSA rated: 20 ampere 125 volt
16 ampere 250 voltVDE, SEMKO, SEV, NEMKO, DEMKO, FI,SETI, KEMA rated: 16 ampere 250 volt
57080 3, 18,20, 22
3, 4, 7,12, 13,17, 18,20, 22
57081
3.2 DIA. THRU6 X 90° C'SINK
2932
30
4253
25
4232.5
M3
R3MAX.
3.2 DIA. THRU6 X 90° C'SINK
30
4253 35
32
3342
25R3MAX.
M3
Same as inlet No. 57081 except with 4.0 x0.8 mm (.157" x .032") solder terminals.
3, 4, 7,12, 13,17, 18,20, 22
57082
IEC 60320 C-20 INLETS2 Pole 3 Wire Grounding20 Amp 125 Volt, 16 Amp 250 Volt (UL / CSA); 16 Amp 250 Volt (Int’l) "CE" MARK
70°C
IEC 60320 C-20
I C I
TM International Configurations, Inc. • P.O. Box 3374 • Enfield, Connecticut 06083 • TEL (860) 749-6380 • FAX (860) 749-2985
© 2004 International Configurations, Inc. Entire contents of this catalog copyrighted. www.InternationalConfig.com
Approvals: 1.ASTA 2.CEBEC 3.CSA 4.DEMKO 5.PSE(JET) 6.EANSW(DFT) 7.FI 8.GS 9.IMQ 10.JET 11.JIS 12.KEMA13.NEMKO 14.OVE 15.SAA 16.SABS 17.SEMKO 18.SEV 19.SII 20.UL 21.UTE 22.VDE 23.ISO 24.CCC 25.IRAM 26.BSI
148
57745
Cat. No. Description
57740
Power inlet, IEC 60320 C-20. Snap-inmount to 1.5 mm thick panels. Blackthermoplastic. Brass terminals and con-tacts, nickel plated. Quick disconnectterminals, 6.3 x 0.8 mm (.250" x .032").
UL / CSA rated: 20 ampere 125 volt
20 ampere 250 voltVDE rated: 16 ampere 250 volt
NOTE: Snap-in models available fordifferent panel thicknesses.
Same as inlet No. 57740 except with 4.0 x0.8 mm (.157" x .032") solder terminals.
57745 3, 20, 22
57740 3, 20, 22
Approvals
IEC 60320 C-20 INLETS2 Pole 3 Wire Grounding20 Amp 125 Volt, 20 Amp 250 Volt (UL / CSA); 16 Amp 250 Volt (Int’l) "CE" MARK
MOUNTING HOLE
MOUNTING HOLE
All dimensions are in millimeters (1 mm = 0.039")
70°C
IEC 60320 C-20
I C I
TMInternational Configurations, Inc. • P.O. Box 3374 • Enfield, Connecticut 06083 • TEL (860) 749-6380 • FAX (860) 749-2985
© 2004 International Configurations, Inc. Entire contents of this catalog copyrighted. www.InternationalConfig.com
Approvals: 1.ASTA 2.CEBEC 3.CSA 4.DEMKO 5.PSE(JET) 6.EANSW(DFT) 7.FI 8.GS 9.IMQ 10.JET 11.JIS 12.KEMA13.NEMKO 14.OVE 15.SAA 16.SABS 17.SEMKO 18.SEV 19.SII 20.UL 21.UTE 22.VDE 23.ISO 24.CCC 25.IRAM 26.BSI
36 3121
28
3
24.224.0
32.232.0
R 3.0 MAX.
3.0
3621
28
26
24.224.0
32.232.0
R 3.0 MAX.
149
Cat. No. ApprovalsDescription
57735
57730
MOUNTING HOLE
MOUNTING HOLE
All dimensions are in millimeters (1 mm = 0.039")
Power entry module. Integral double pole(DPST) on/off switch. Screw mount fromfront or back. 6.3 x 0.8 mm (.250" x .032")quick connect terminals. Black UL 94 V-0thermoplastic body.Rated 20 Ampere -125 Volt, 20 Ampere -250 Volt (UL/CSA), 16 Ampere - 250 Volt(International).
57730 3, 20, 22
Power entry module. Integral double pole(DPST) on/off switch. Snap-in mount to 1.5mm thick panels. 6.3 x 0.8 mm (.250" x.032") quick connect terminals. Black UL 94V-0 thermoplastic body.Rated 20 Ampere -125 Volt, 20 Ampere -250 Volt (UL/CSA), 16 Ampere - 250 Volt(International).NOTE: Snap-in models available fordifferent panel thicknesses.
57735 3, 20, 22
IEC 60320 C-20 POWER ENTRY MODULES2 Pole 3 Wire Grounding20 Amp 125 Volt, 20 Amp 250 Volt (UL / CSA); 16 Amp 250 Volt (Int’l) "CE" MARK
70°C
IEC 60320 C-20
I C I
TM International Configurations, Inc. • P.O. Box 3374 • Enfield, Connecticut 06083 • TEL (860) 749-6380 • FAX (860) 749-2985
© 2004 International Configurations, Inc. Entire contents of this catalog copyrighted. www.InternationalConfig.com
Approvals: 1.ASTA 2.CEBEC 3.CSA 4.DEMKO 5.PSE(JET) 6.EANSW(DFT) 7.FI 8.GS 9.IMQ 10.JET 11.JIS 12.KEMA13.NEMKO 14.OVE 15.SAA 16.SABS 17.SEMKO 18.SEV 19.SII 20.UL 21.UTE 22.VDE 23.ISO 24.CCC 25.IRAM 26.BSI
4.8
DIA. 3.3 THRUDIA 6.4 COUNTERBORE
3632.2 52
56.8
26.6
46.25767
R 2.95±0.05
46.5±0.10
32.5±0.10
26.6
4.832.256.8
46.2
5236
50
R 2.95±0.05
DIA. 3.6 THRU(2) PLACES
32.5±0.10
46.5±0.10
57.0±0.10
150
57100 Power outlet. Screw on panel mount.Black thermoplastic. Brass horizontalterminals and contacts, nickel plated.Quick disconnect terminals, 6.3 x 0.8 mm(.250" x .032").
UL / CSA rated: 20 ampere 125 volt
20 ampere 250 voltVDE rated: 16 ampere 250 voltNOTE: Available with screw terminals.Catalog number 57100-ARated: 16 ampere 250 volts.European approvals only.
Cat. No. Approvals Description
3, 17, 18,20, 22
IEC 60320 C-19 OUTLETS2 Pole 3 Wire Grounding20 Amp 125 Volt, 20 Amp 250 Volt (UL / CSA); 16 Amp 250 Volt (Int’l) "CE" MARK
57105, 57107
57100
TYPICAL
All dimensions are in millimeters (1 mm = 0.039")
MOUNTING HOLE
MOUNTING HOLE
57105 3, 7, 17,18, 20, 22
Power outlet. Screw on panel mount.Black thermoplastic. Brass verticalterminals and contacts, nickel plated.Quick disconnect terminals, 6.3 x 0.8 mm(.250" x .032").
UL / CSA rated: 20 ampere 125 volt
16 ampere 250 voltVDE rated: 16 ampere 250 volt
3.2 DIA. THRU6 X 90° C'SINK
45
34
384155
45
30
38
R3MAX.
M3
Power outlet. Screw on panel mount.Black thermoplastic. Brass vertical termi-nals and contacts, nickel plated. 4.0 x 0.8mm (.157" x .032") quick disconnect /solder terminals.
UL / CSA rated: 20 ampere 125 volt
16 ampere 250 voltVDE rated: 16 ampere 250 volt
571074554 37
34
34
3.3 DIA. THRU5.8 X 90° C'SINK
R3MAX.
M3
3845
30
3, 7, 17,18, 20, 22
70°C
IEC 60320 C-19
I C I
TMInternational Configurations, Inc. • P.O. Box 3374 • Enfield, Connecticut 06083 • TEL (860) 749-6380 • FAX (860) 749-2985
© 2004 International Configurations, Inc. Entire contents of this catalog copyrighted. www.InternationalConfig.com
Approvals: 1.ASTA 2.CEBEC 3.CSA 4.DEMKO 5.PSE(JET) 6.EANSW(DFT) 7.FI 8.GS 9.IMQ 10.JET 11.JIS 12.KEMA13.NEMKO 14.OVE 15.SAA 16.SABS 17.SEMKO 18.SEV 19.SII 20.UL 21.UTE 22.VDE 23.ISO 24.CCC 25.IRAM 26.BSI
151
Cat. No. ApprovalsDescription
57103
MOUNTING HOLE
All dimensions are in millimeters (1 mm = 0.039")
Power outlet. Snap-in mount to 1.5 mmpanels. Black thermoplastic. Brass hori-zontal terminals and contacts, nickelplated. Quick disconnect terminals, 6.3 x0.8 mm (.250" x .032").
UL / CSA rated: 20 ampere 125 volt
20 ampere 250 voltVDE rated: 16 ampere 250 volt
NOTE: Snap-in models available fordifferent panel thicknesses.
57103 3, 20, 22
IEC 60320 C-19 OUTLETS2 Pole 3 Wire Grounding20 Amp 125 Volt, 20 Amp 250 Volt (UL / CSA); 16 Amp 250 Volt (Int’l) "CE" MARK
70°C
IEC 60320 C-19
I C I
TM International Configurations, Inc. • P.O. Box 3374 • Enfield, Connecticut 06083 • TEL (860) 749-6380 • FAX (860) 749-2985
© 2004 International Configurations, Inc. Entire contents of this catalog copyrighted. www.InternationalConfig.com
Approvals: 1.ASTA 2.CEBEC 3.CSA 4.DEMKO 5.PSE(JET) 6.EANSW(DFT) 7.FI 8.GS 9.IMQ 10.JET 11.JIS 12.KEMA13.NEMKO 14.OVE 15.SAA 16.SABS 17.SEMKO 18.SEV 19.SII 20.UL 21.UTE 22.VDE 23.ISO 24.CCC 25.IRAM 26.BSI
42 41
38
34
29.729.5
37.737.5
R3 MAX.
152
NOTES
I C I
TMInternational Configurations, Inc. • P.O. Box 3374 • Enfield, Connecticut 06083 • TEL (860) 749-6380 • FAX (860) 749-2985
© 2004 International Configurations, Inc. Entire contents of this catalog copyrighted. www.InternationalConfig.com
Recommended