View
7
Download
1
Category
Preview:
Citation preview
PRICELIST
2020
Am Hottenwald 8
66606 ST. WENDEL
GERMANY
+49 (0)6851/97394 0 � +49 (0)6851/97394 44
industie@lezaud.com www.lezaud.com
Competence
and Innovation
in Viton®, Silicone,
Santoprene®, PTFE,
Thermoplastic
Elastomeres
Accredited Body: DQS GmbH, August-Schanz-Straße 21, 60433 Frankfurt am Main, Germany
CERTIFICATE
This is to certify that
Lézaud & Co GmbH
Am Hottenwald 8 66606 St. Wendel-Bliesen Germany with the following business unit
AET Lézaud GmbH
Am Hottenwald 8 66606 St. Wendel-Bliesen Germany
has implemented and maintains a Quality Management System.
Scope: Trading and manufacturing with products of rubber and thermoplastic elastomers for fluid and seal technology
Through an audit, documented in a report, it was verified that the management system fulfills the requirements of the following standard:
ISO 9001 : 2015
Certificate registration no.
Valid from
Valid until
Date of certification
506449 QM15
2018-09-17
2021-09-16
2018-09-17
DQS GmbH
Stefan Heinloth Managing Director
We will send you a tailor-made offer. Please send your inquiry to industrie@lezaud.com
Our Services
Our services extend to more than the delivery of our
standard products. With many years of experience in the
application of rubber and elastomers we provide
competent advice and customized solutions.
We offer for example
glue, welding, curing,
water jet cutting
and
the development of prototypes.
For example:
• Tubing and profiles
• Braided hoses
• Cords and profiles
• Foils and stamping parts
• Tube rings and O-rings
• Inflatable seals
• Plugs, buffers, seals, compensators
and nozzles
• Molded parts according to drawings
In NR, SBR, NBR, HNBR,CR, EPDM, Butyl, Silicone; Viton®,
Sanroprene®, TPE and many more
Your Specialist in
Viton®, Silicone,
Santoprene®
and
Thermoplastic
Elastomers
The company Lézaud & Co
GmbH (Ltd), Fluid and Seal
Technology for Laboratory,
Chemistry, Medicine and
Industry, has been in existence
since 29 July 1998 and it is the
continuation of the company
Raymond Lézaud, Laboratory,
Medical and Industrial Supplies.
The main focus is on supplying
high-performance rubber and
plastic products, manufactured
in silicone, fluoroelastomers
and thermoplastic elastomers.
Since 19.12.2012, the
companies have been
separated into the distribution
AET Lézaud GmbH and the
manufacturing company Lézaud
& co GmbH. Ten members of
staff are currently employed
here, and a steady growth is
noticeable. As of June 2017, the
enterprises will be located in
Hottenwald industrial estate in
Bliesen with their own
purposely-built warehouse and
office building.
Table of contents Standard program, Stock itemsPart 1 Tubes
Product Description A-Z Application Page
LEZ-NEO Technology 6
LEZ-FLUTEC 75 Lab|Technology 21
LEZ-FLON FEP Lab|Technology|Medical 25
LEZ-FLON PFA Lab|Technology|Medical 26
LEZ-FLON PTFE Lab|Technology|Medical 25
LEZ-FLON PVDF Lab|Technology|Medical 26
LEZ-GAS Laboratory|Technology 20
LEZ-LAB Laboratory|Technology 4
LEZ-THERMOBLOND Food|Pharmacy|Medical 5
LEZ-VIN Food 5
LEZ-NIT Technology 6
LEZ-PAM Lab|Chemistry|Hydraulics 20
LEZ-PET Lab|Chemistry|Hydraulics 20
LEZ-SANPRESS Food|Pharmacy|Medical 11
LEZ-SAN Food|Pharmacy|Medical 8
LEZ-SANSOFT Food|Pharmacy|Medical 9
LEZ-SANMED BIO Food|Pharmacy|Medical 10
LEZ-SANTEC Technology 11
LEZ-SIL 60TF Food 12|13
LEZ-SIL 60PTF Food 17
LEZ-SIL 55TP Food|Pharmacy|Medical 15
LEZ-SIL 60TP Pharmacy|Medical 14
LEZ-SIL 60TPPT Pharmacy|Medical 16
LEZ-SIL 60ISOPT Pharmacy|Medical 15
LEZ-SIL FTPR Food 19
LEZ-SITEC RTPR Technology 18
LEZ-SIL TPR Pharmacy |Medical 18
LEZ-SILEXP 15 Lab|Technology|Insulation 19
LEZ-PERIFLEX Food|Medical|Pharmacy 7
LEZ-PERIMED Food|Medical|Pharmacy NEW1
LEZ-VAC Laboratory|Technology 4
LEZ-VITEL 70 Lab|Chemistry|Technology NEW2
LEZ-VITCHEM 70GF Chemistry|Pharmacy|Food 21
LEZ-VIT 70 Lab|Chemistry|Technology 22
LEZ-VITEC 60 Lab|Chemistry|Technology 23
LEZ-VIT PP55 Laboratory|Technology 23
LEZ-VITMET 70/ES Hydraulics|Pressure 24
LEZ-VITGLAS 70 Hydraulics|Pressure 24
Part 2 Cords and profiles
Product Description A-Z Application Page
LEZ-NEO Technology 27
LEZ-EPEM Technology 28
LEZ-EPEX 15 Technology 29
LEZ-EPEX 15 Technology 30|31
LEZ-EPEX 15 SK Technology 32
LEZ-NIT Technology 27
LEZ-SAN 65 Food|Pharmacy|Medical 33
LEZ-SANTEC 65 Technology 34
Chloroprene tube (Neoprene)
Fluoroelastomer tube
Fluored-thermoplastic tube
Fluored-thermoplastic tube
Polyamide tube
Polyethylene tube
Natural rubber tube
Fluored-thermoplastic tube
Fluored-thermoplastic tube
Gas tube made of Butyl
Laboratory tube
Latex-alternative tube of TPE
Nitrile tube (NBR)
Santoprene® pressure tube, FDA-compliant
Santoprene® tube for peristaltic pumps, FDA-compliant
Santoprene® tube, biocompatible acc. to USP Class VI
Santoprene® tube for peristaltic pumps, FDA-compliant
Santoprene® tube for technical use
Silicone tube for food industry, FDA and BfR compliant
Silicone tube FDA-compliant for food contacts,vulc. platinum
Silicone tube for peristaltic pumps, vulc. peroxide
Silicone tube, vulcanization peroxide
Silicone tube, vulcanization platinum
Silicone tube, vulc. platinum, clean room ISO 8
Silicone tube reinforced with fibreglass, red cover
Silicone foam tube for thermical insulation
Silicone tube reinforced with fibreglass
Silicone tube reinforced with fibreglass
TPE tube for perictalic pumps, biocom. acc. to USP Class VI
TPE tube for perictalic pumps
Vacuum tube for laboratory
Viton® tube for biofuel and acids
Viton® tube
Viton® tube for peristaltic pumps
Viton® tube, precision tubes for peristaltic pumps
Viton® pressure tube, braided with stainless steel
Viton® tube, electroconductive
Nitrile (NBR) cord and profile
Santoprene® cord and profile, FDA-compliant
Santoprene® cord and profile
Viton® pressure tube, braided with fibreglass
Chloroprene cord
EPDM cord and profile
EPDM foam cord
EPDM foam profile
EPDM foam profile, self-adhesive
Page 2 Vers.20|05
LEZ-SIL 60TF Food|Pharmacy|Medical 36
LEZ-SIL 60RT Technology|Thermal Processes 37
LEZ-SILEXP 15 Technology 38
LEZ-GOMEX Food|Pharmacy|Medical 35
LEZ-GOM Food|Pharmacy|Medical 35
LEZ-VITCHEM 70GF Chemistry|Pharmacy|Food|Cosm. 41
LEZ-VIT 70 Technology|Lab|Chemistry 39
LEZ-VITMOOS E20 Technology|Chemistry 40
LEZ-VITMOOS CHEM Technology|Chemistry 41
Part 3 Sheets and Plates
Produit Description A-Z Application Page
LEZ-BUFLON Lab|Pharmacy|Medical 49
LEZ-FLON PTFE Lab|Pharmacy|Medical|Food 50
LEZ-FLON PTFE 51
LEZ-SAN 65 Food|Pharmacy|Medical 45
LEZ-SIL 60TF Food|Pharmacy|Medical 42
LEZ-SIL 60RT Technology|Thermal Processes 42
LEZ-SILFLON Laboratory|Pharmacy|Medical 49
LEZ-SIL 60RT/S Technology 45
LEZ-SILEXP 15 Thermal Insulation|Technology 43
LEZ-SILEXP 15 Thermal Insulation|Technology 43
LEZ-SILEXP 20R Thermal Insulation|Technology 44
LEZ-SILEXP 25PTF Food|Pharmacie|Medical 44
LEZ-VITCHEM 70GF Chemistry|Pharmacie|Food|Cosm. 47
LEZ-VIT 75 Technology|Chemistry 46
LEZ-VITEC 75 Technology|Chemistry 46
LEZ-VIT 75/S Technology|Chemistry 47
LEZ-VIT 75/N Technology|Chemistry 47
LEZ-VITMOOS E20 Tech|Chem|Thermal Insulation NEW3
LEZ-VITMOOS P10 Tech|Chem|Thermal Insulation 48
LEZ-VITSILEXP 7515 Thermal Insulation|Technology 48
Part 4 Rubber Stoppers
Product Description A-Z Application Page
LEZ-GOM series F Food|Pharmacy|Medical 52
LEZ-GOM series D Stopper, Rubber grey, according to DIN 12878 Laboratory|Industry 53
LEZ-SIL series D Food|Pharmacy|Medical 54
LEZ-SIL series P Food|Pharmacy|Biology 55
LEZ-TEFLEX Food|Pharmacy|Biology 56
LEZ-VIT series T Laboratory|Chemistry|Industry 55
Septen NLaboratory|Chemistry|Industry NEW4-8
Part 5 Glue and Accessories
Product Description A-Z Application Page
LEZ VITFIX Technology 57
LEZ-VITSEAL Technology 57
LEZ-VITPRIM Technology 57
LEZ-SILFIX CAF 1 Technology 57
LEZ-SILFIX CAF 3 Technology 57
LEZ-SILFIX HT CAF 8 Technology 57
LEZ-SILFIX 732 Food|Pharmacy|Medical 57
Part 6 Terms of sales and delivery
Terms of sales and delivery (Short version) with Bank Data 60
Terms of sales and delivery 58|59
Silicone cord and profile, translucent
Silicone cord and profile, brick-red
Silicone foam cord and profile
TPE foamrubber cord and profile
TPE softrubber cord and profile, FDA-compl.
Viton® cord and profile
Viton® cord and rectangular profile
Viton® foam cord and profile
Viton® foam cord and profile
Butyl/PTFE plate
PTFE sheet, plate, rod
PTFE sheet, plate, rod/ Weight calculation table
Santoprene® sheet, FDA compliant
Silicone sheet and plate, FDA compliant
Silicone sheet and plate
Silicone/PTFE plate
Silicone sheet glass fabric-reinforced
Silicone foam plate
Silicone foam roll
Silicone foam roll
Silicone foam roll, FDA compliant
Viton® sheet and plate
Viton® sheet and plate
Viton® sheet glass fabric-reinforced
Viton® sheet
Viton® sheet nomex-reinforced
Viton® sponge sheet
Viton® sponge plate
Viton®|Siliconefoam sheet
Fluoroelastomer sealing paste
Primer for Fluoroelastomer glue
Stopper, Viton green
Silicone glue, transparent
Silicone glue, brick-red
Silicone glue, high temperatures, brick-red
Silicone glue, transparent, FDA-compliant
Stopper, NR grey, BfR compliant
Stopper acc. DIN 12878, silicone FDA compliant
Stopper, Silicone vulc.platinum, FDA compliant
of differents materials
Glue for fluoroelastomer
Stopper, TPE nature
Vers. 20|05 Page 3
Teil 1 Schläuche
LEZ-PERIMED TPE Tube for peristaltic pumps
Quality
Tolerance ISO DIN 3302.1 E1
Application
Coils length 25 meters; minimum delivery: 5 m
Dimensions Stock
Di x wall (Dex) 5 - 24m >= 25 m >=100 m >= 200 m (*)
Metric dimensions coil length: 25 m
8202010 med 2 x 1 (4) 5,53 3,30 2,61 2,21 A8202510 med 2,5 x 1 (4,5) 5,85 3,77 2,99 2,54 A8203010 med 3 x 1 (5) 6,24 4,02 3,19 2,69 A8204010 med 4 x 1 (6) 7,54 4,45 3,52 2,98 A8205015 med 5 x 1,5 (8) 11,44 6,81 5,40 4,50 A8206015 med 6 x 1,5 (9) 12,74 7,61 6,03 5,01 A8207015 med 7 x 1,5 (10) MQ=100 m 6,24 5,21 C8208020 med 8 x 2 (12) 20,80 15,02 12,06 10,08 A8210020 med 10 x 2 (14) MQ=50 m 23,40 19,49 10,83 C8212030 med 12 x 3 (18) MQ=50 m 30,81 25,77 21,52 C8215030 med 15 x 3 (21) MQ=50 m 37,38 31,34 26,25 C
coil length: 10 m 5 - 20 m >= 20 m >= 50 m >= 100 m
8218030 med 18 x 3 (24) MQ=30 m 44,72 37,28 31,16 C8220030 med 20 x 3 (26) MQ=30 m 49,00 40,86 34,15 C8220050 med 20 x 5 (30) MQ=30 m 88,75 74,00 65,85 C8225050 med 25 x 5 (35) MQ=30 m 106,35 88,68 74,12 C
British dimensions coil length: 25 m
8200816 med 0,8 x 1,6 (4,0) 6,50 4,25 3,38 2,84 A
8201616 med 1,6 x 1,6 (4,8) 7,92 5,11 4,05 3,40 A
8202416 med 2,4 x 1,6 (5,6) 8,84 5,62 4,51 3,76 A
8203216 med 3,2 x 1,6 (6,4) 9,49 5,96 4,79 3,99 A
8203224 med 3,2 x 2,4 (8,0) MQ=100 m 8,37 6,98 C
8203232 med 3,2 x 3,2 (9,5) MQ=100 m 10,22 8,46 C
8204016 med 4,0 x 1,6 (7,2) 10,27 6,75 5,42 4,53 A
8204816 med 4,8 x 1,6 (8,0) 10,79 7,10 5,71 4,76 A
8204824 med 4,8 x 2,4 (9,5) MQ=100 m 9,65 8,05 C
8206416 med 6,4 x 1,6 (9,5) 13,07 8,94 7,13 5,95 A
8206424 med 6,4 x 2,4 (11,1) 24,38 16,32 13,05 10,83 A
8206432 med 6,4 x 3,2 (12,7) MQ=50 m 17,46 13,88 11,57 C
8208016 med 8,0 x 1,6 (11,1) MQ=100 m 7,93 6,63 C
8208024 med 8,0 x 2,4 (12,7) 26,85 17,88 14,29 11,90 A
8209524 med 9,5 x 2,4 (14,3) 29,38 20,44 16,31 13,58 A
8209532 med 9,5 x 3,2 (15,9) MQ=50 m 29,10 23,26 19,38 C
8212732 med 12,7 x 3,2 (19,0) 53,30 36,19 28,94 24,12 A
coil length: 10 m 5 - 20 m >= 20 m >= 50 m >= 100 m
8215948 med 15,9 x 4,8 (25,4) MQ=20 m 67,13 53,68 44,74 C
8219048 med 19,0 x 4,8 (28,5) MQ=20 m 76,36 61,05 50,81 C
8225448 med 25,4 x 4,8 (34,9) MQ=20 m 94,39 77,35 63,92 C
(*) Delivery time: A = in stock, B = about 1 week (from partner stock), C = new production, by agreement
(***)
Profile, sheet and plate on requestOther dimensions, hardnesses and colors on request
Pharma|Med|Food
Thermoplastic elastomer type TPE-S; 58 +/-5 Shore A; density= 0.89; transparent; compliant: FDA 21 CRF
§177.2600, EU 10/2011, biocompatible according to USP class VI, ; good chemical resistance in aqueous
environment against acids and many organic solvents (in particular ketons, eters, ethers, aldehydes); absolutely
odorless and tasteless; operating temperature -50°C to +125 °C, peaks up to 140 °C; Fatigue strength: approx. 75
million flexions (depends on dimensions and pumps) (**)
pharmaceutical, medical, chemical and biological industries, filling technologies, oenology, beverage industry,
mechanical engineering and equipment manufacturing, in wine production
Particularly well suited for peristaltic pumps
Code n°Quantity in meters €/m
Operating time tested with a tube 4.8x1.6 mm (Dext=8.0) in a peristaltic pump with three rollers at 150 r.p.m.
NEW 1 Subject to prior sale Vers. 20|05
Teil 1 Tubes
LEZ-VITEL 70 Viton® tube Lab|chemical industry|technology
electroconductive
Quality
Tolerance ISO DIN 3302.1 E2
Application
Coil length production lengths coiled approx. 25 m
Dimensions Stock
Di x wall (Dex) 5 to 24 m >= 25 m >= 50 m >= 100 m (*)
1304010 EL 4 x 1 (6) 10,43 7,30 6,21 5,59 A
1305015 EL 5 x 1,5 (8) 14,18 9,92 8,44 7,59 A
1306015 EL 6 x 1,5 (9) 16,98 11,89 10,10 9,09 A
1308020 EL 8 x 2 (12) 28,01 19,61 16,67 15,00 A
(*) Delivery time: A = in stock, B = about 1 week (from partner stock), C = new production, by agreement
(**) Trademark of Dupont Performance Elastomers
Other dimensions on request
Code n°Quantity in meters €/m
Viton®(**); 70 +/-5 Shore A; black; density= 1.87 g/cm³; electric conductivity: 2 x 105 Ohm x cm; resistant
against aliphatic, aromatic and halogen-substituted hydrocarbons, acids, gasoline, diesel fuel, oils, glycols and
hydraulic liquids; not suitable with methanol, ketones, aldehydes, esters, ethers; particularly impermeable to
gas; operating temperature -15 °C to +200 °C
Fuel, oil and gas lines in ATEX environments, filling of volatile products in ATEX environments, gas
chromatography equipment, gas and emission measuring instruments
Vers. 20|05 Subject to prior sale NEW 2
Teil 3 Folien und Platten
LEZ-VITMOOS E20 Viton® sponge sheet Chemistry|Technology|Therm.Insul.
Rolls
Quality
Tolerance see table
Application
Format
Thickness Width Stock
in mm mm 1 to 4,9 m2 >= 5 m² >=10 m
2>= 20 m
2 (*)
4420020 2 +/-0,5 140 +/-5 348,56 292,18 262,96 233,74 C
4420030 3 +/-0,5 150 +/-5 421,08 358,59 320,07 289,52 C
4420040 4 +/-0,7 150 +/-5 566,11 478,11 424,99 382,49 C
4420050 5 +/-0,7 150 +/-5 746,24 628,19 571,08 511,32 A
4420060 6 +/-1 130 +/- 5 891,26 758,34 689,28 617,56 A
4420080 8 +/-1 115 +/-5 1132,23 977,48 888,50 810,14 C
4420100 10 +/-1 100 +/-5 1409,41 1239,11 1126,23 1035,91 C
Plate
Format
Thickness Width Stock
in mm mm 1 to 4,9 m2 >= 5 m² >=10 m
2>= 20 m
2 (*)
4420020 P 2 +/-0,5 approx. 300 x 1900 349,19 296,81 267,13 240,42 A
4420030 P 3 +/-0,5 approx. 300 x 1900 432,53 367,65 330,89 297,80 A
4420040 P 4 +/-0,7 approx. 300 x 1900 532,37 452,51 407,26 366,54 A
4420050 P 5 +/-0,7 approx. 300 x 1900 692,63 588,74 529,86 476,88 C
4420060 P 6 +/-1 approx. 300 x 1900 834,47 709,30 638,37 574,54 C
4420080 P 8 +/-1 approx. 300 x 1900 1081,32 919,12 827,21 744,49 C
4420100 P 10 +/-1 approx. 300 x 1900 1352,11 1149,29 1034,36 930,92 C
(*) Delivery time A = in stock, B = about 1 week (from partner stock), C = new production, by agreement
(**) Trademark of Dupont Performance Elastomers
Quantity in m² €/m²
extruded plates made of expanded fluoroelastomer, of 100% Viton® (**); about 30 Shore A; density: about
0.9; black; compliant: UL94V0; skin on all faces; resistant against acids, bases, aliphatic, aromatic and
halogen-substituted hydrocarbons, alcohols, glycols, fuels, diesel, mineral and vegetable oils and hydraulic
fluids; operating temperature -20 °C to +200 °C, peaks up to +300 °C.
seals for laboratory equipment, chemical plants, painting units, oil industry, tanks for chemicals and oils, aeronautics
and ship construction, pumps, mechanical engineering, boilers and thermal appliances, hydraulic and nuclear power
stations, steel, aluminium, petrochemistry, automobile industry, incineration and combustion plants, electrical
engineering and metal industries
Code n°
approx. 300 x 1900 mm
rolls with about 10 m x width x thickness (see table); while stock lasts
Code n°Quantity in m² €/m²
NEW 3 Subject to prior sale Vers. 20|05
Teil 4 Rubber stoppers and septa
Septa from LEZ-BUFLON Butyl/PTFE plate Labor|Pharma|Med
Quality
Application liquid chromatography, gas chromatography
Packaging units 50 pieces
Stock
up to 4 PU >= 5 PU >= 10 PU >= 20 PU >= 50 PU (*)
4711002 S8 Ø 8 mm 1,0/0,2 one side 5,64 4,43 3,88 3,44 3,10 A
4711002 S11 Ø 11 mm 1,0/0,2 one side 7,27 5,71 5,00 4,44 4,00 A
4711002 S13 Ø 13 mm 1,0/0,2 one side 8,64 6,79 5,94 5,28 4,75 A
4711002 S18 Ø 18 mm 1,0/0,2 one side 13,05 10,25 8,97 7,97 7,18 A
4711002 S22 Ø 22 mm 1,0/0,2 one side 17,09 13,43 11,75 10,44 9,40 A
4711402 S8 Ø 8 mm 1,4/0,2 one side 6,06 4,76 4,17 3,70 3,33 A
4711402 S11 Ø 11 mm 1,4/0,2 one side 7,88 6,19 5,42 4,81 4,33 A
4711402 S13 Ø 13 mm 1,4/0,2 one side 9,39 7,38 6,46 5,74 5,17 A
4711402 S18 Ø 18 mm 1,4/0,2 one side 14,30 11,23 9,83 8,74 7,86 A
4711402 S22 Ø 22 mm 1,4/0,2 one side 18,79 14,76 12,92 11,48 10,33 A
4711802 S8 Ø 8 mm 1,8/0,2 one side 6,24 4,90 4,29 3,81 3,43 A
4711802 S11 Ø 11 mm 1,8/0,2 one side 8,14 6,39 5,60 4,97 4,48 A
4711802 S13 Ø 13 mm 1,8/0,2 one side 9,72 7,64 6,68 5,94 5,35 A
4711802 S18 Ø 18 mm 1,8/0,2 one side 14,83 11,65 10,20 9,06 8,16 A
4711802 S22 Ø 22 mm 1,8/0,2 one side 19,52 15,33 13,42 11,93 10,73 A
4713002 S8 Ø 8 mm 3,0/0,2 one side 6,67 5,24 4,58 4,07 3,67 A
4713002 S11 Ø 11 mm 3,0/0,2 one side 8,74 6,87 6,01 5,34 4,81 A
4713002 S13 Ø 13 mm 3,0/0,2 one side 10,48 8,23 7,20 6,40 5,76 A
4713002 S18 Ø 18 mm 3,0/0,2 one side 16,08 12,63 11,05 9,83 8,84 A
4713002 S22 Ø 22 mm 3,0/0,2 one side 21,21 16,67 14,58 12,96 11,67 A
(*) Delivery time: A = in stock, B = about 1 week (from partner stock), C = new production, by agreement
from butyl plate; 50 +/-10 Shore A; red; compliant: EAB/DAB 2014, 8.Cap.3.2.9,Typ 2, BfR XXI; the mixture is
free of phthalates and complies with REACH 1907/2006 in the current edition; with one or both sides vulcanized
with PTFE film; grey; compliant: BfR LI, 2.1.1.1., FDA 21 § 177.1550; according to 2002/72/EU, its extensions
and 10/2011/EU the following restriction applies to the monomers (TFE), used for production of PTFE: TFE/SML =
0.05 mg/kg; operating temperature -30 °C to +100 °C
Also available in LEZ-VITFLON (FKM/PTFE), please ask us.
Other sizes on reqest
Code n° SizePrice €/100 piecesThickness
Butyl/PTFE
in mm
Vers. 20|05 Subject to prior sale NEW 4
Part 4 Rubber stoppers and septa
Septa from LEZ-SILFON Silikon/PTFE plate Labor|Pharma|Med
Quality
Application liquid chromatography, gas chromatography
Packaging units 50 pieces
Stock
up to 4 PU >= 5 PU >= 10 PU >= 20 PU >= 50 PU (*)
4811001 S8 Ø 8 mm 1,0/0,1 one side 7,27 5,71 5,00 4,44 4,00 A
4811001 S11 Ø 11 mm 1,0/0,1 one side 9,61 7,55 6,61 5,87 5,29 A
4811001 S13 Ø 13 mm 1,0/0,1 one side 11,56 9,08 7,95 7,06 6,36 A
4811001 S18 Ø 18 mm 1,0/0,1 one side 17,86 14,03 12,28 10,92 9,82 A
4811001 S22 Ø 22 mm 1,0/0,1 one side 23,64 18,57 16,25 14,44 13,00 A
4811301 S8 Ø 8 mm 1,3/0,1 one side 8,09 6,36 5,56 4,94 4,45 A
4811301 S11 Ø 11 mm 1,3/0,1 one side 10,78 8,47 7,41 6,59 5,93 A
4811301 S13 Ø 13 mm 1,3/0,1 one side 13,02 10,23 8,95 7,96 7,16 A
4811301 S18 Ø 18 mm 1,3/0,1 one side 20,27 15,92 13,93 12,39 11,15 A
4811301 S22 Ø 22 mm 1,3/0,1 one side 26,91 21,14 18,50 16,44 14,80 A
4813001 S8 Ø 8 mm 3,0/0,1 one side 13,94 10,95 9,58 8,52 7,67 A
4813001 S11 Ø 11 mm 3,0/0,1 one side 19,13 15,03 13,15 11,69 10,52 A
4813001 S13 Ø 13 mm 3,0/0,1 one side 23,46 18,44 16,13 14,34 12,90 A
4813001 S18 Ø 18 mm 3,0/0,1 one side 37,47 29,44 25,76 22,90 20,61 A
4813001 S22 Ø 22 mm 3,0/0,1 one side 50,30 39,52 34,58 30,74 27,67 A
Quality
Stock
up to 4 PU >= 5 PU >= 10 PU >= 20 PU >= 50 PU (*)
4811902 S8 Ø 8 mm 1,9/0,25 one side 15,01 11,79 10,32 9,17 8,26 A
4811902 S11 Ø 11 mm 1,9/0,25 one side 20,67 16,24 14,21 12,63 11,37 A
4811902 S13 Ø 13 mm 1,9/0,25 one side 25,38 19,94 17,45 15,51 13,96 A
4811902 S18 Ø 18 mm 1,9/0,25 one side 40,62 31,92 27,93 24,82 22,34 A
4811902 S22 Ø 22 mm 1,9/0,25 one side 54,59 42,89 37,53 33,36 30,02 A
(*) Delivery time: A = in stock, B = about 1 week (from partner stock), C = new production, by agreement
from silicone plate; 45 +/-5 Shore A; pure white; compliant: FDA 21CFR §177.2600, BfR XV; one side
vulcanized with PTFE film; red; compliant: FDA 21 §177.1550, BfR LI, 2.1.1.1.; according to 2002/72/EU, the
following restriction applies to the monomers (TFE), used for the production of PTFE: TFE/SML = 0.05 mg/kg. The
material applies to DAB / EAB 2008, chap. 3.2.9.; the mixture is free of phthalates and complies with REACH
1907/2006 in the current edition.; operating temperature -60 °C to +220 °C
Thickness
Butyl/PTFE
in mm
Thickness
Butyl/PTFE
in mm
Also available in LEZ-VITFLON (FKM/PTFE), please ask us.
Other sizes on reqest
Code n° SizePrice €/100 pieces
from silicone plate; 45 +/-5 Shore A; transparent; one side vulcanized with PTFE light beige
Code n° SizePrice €/100 pieces
NEW 5 Subject to prior sale Vers. 20|05
Teil 4 Rubber stoppers and septa
Septa from LEZ-FLON PTFE plate Labor|Chemistry|Food|Pharma|Med
Quality
Application liquid chromatography, gas chromatography
Packaging units 50 pieces
Stock
up to 4 PU >= 5 PU >= 10 PU >= 20 PU >= 50 PU (*)
16FB0001 S8 Ø 8 mm 0,1 2,05 1,61 1,41 1,25 1,13 A
16FB0001 S11 Ø 11 mm 0,1 2,15 1,69 1,48 1,31 1,18 A
16FB0001 S13 Ø 13 mm 0,1 2,23 1,76 1,54 1,37 1,23 A
16FB0001 S18 Ø 18 mm 0,1 2,50 1,97 1,72 1,53 1,38 A
16FB0001 S22 Ø 22 mm 0,1 2,75 2,16 1,89 1,68 1,51 A
16FB0002 S8 Ø 8 mm 0,2 2,28 1,79 1,57 1,40 1,26 A
16FB0002 S11 Ø 11 mm 0,2 2,48 1,95 1,71 1,52 1,37 A
16FB0002 S13 Ø 13 mm 0,2 2,65 2,08 1,82 1,62 1,46 A
16FB0002 S18 Ø 18 mm 0,2 3,19 2,50 2,19 1,95 1,75 A
16FB0002 S22 Ø 22 mm 0,2 3,68 2,89 2,53 2,25 2,02 A
16FB00025 S8 Ø 8 mm 0,25 2,40 1,89 1,65 1,47 1,32 A
16FB00025 S11 Ø 11 mm 0,25 2,65 2,08 1,82 1,62 1,46 A
16FB00025 S13 Ø 13 mm 0,25 2,86 2,24 1,96 1,75 1,57 A
16FB00025 S18 Ø 18 mm 0,25 3,53 2,77 2,43 2,16 1,94 A
16FB00025 S22 Ø 22 mm 0,25 4,15 3,26 2,85 2,53 2,28 A
16FB0005 S8 Ø 8 mm 0,5 2,98 2,34 2,05 1,82 1,64 A
16FB0005 S11 Ø 11 mm 0,5 3,48 2,73 2,39 2,13 1,91 A
16FB0005 S13 Ø 13 mm 0,5 3,90 3,06 2,68 2,38 2,14 A
16FB0005 S18 Ø 18 mm 0,5 5,24 4,12 3,60 3,20 2,88 A
16FB0005 S22 Ø 22 mm 0,5 6,47 5,09 4,45 3,96 3,56 A
(*) Delivery time: A = in stock, B = about 1 week (from partner stock), C = new production, by agreement
from PTFE LEZ-FLON is a fluored thermoplastic, hardness: 55 +/-5 Shore D; density= 2.2, virginal, compliant: FDA
21 CFR 177.1550, UL94 V0; excellent chemical resistance; operating temperature: -200 up to +260 °C; no
water absorption, not flammable (fire class V0 according to UL94); good resistance to pressure; excellent
lubricating properties and nonstick, good electrical and dielectric properties.
Thickness
Butyl/PTFE
in mm
Also available in LEZ-VITFLON (FKM/PTFE), please ask us.
Other sizes on reqest
Code n° SizePrice €/100 pieces
Vers. 20|05 Subject to prior sale NEW 6
Teil 4 Rubber stoppers and septa
Septa from LEZ-VIT 75 Viton® plate Chemistry|Technologie
Quality
Application liquid chromatography, gas chromatography
Packaging units 50 pieces
Stock
up to 4 PU >= 5 PU >= 10 PU >= 20 PU >= 50 PU (*)
4375005 S8 Ø 8 mm 0,5 3,34 2,63 2,30 2,04 1,84 A
4375005 S11 Ø 11 mm 0,5 4,00 3,14 2,75 2,44 2,20 A
4375005 S13 Ø 13 mm 0,5 4,54 3,57 3,12 2,78 2,50 A
4375005 S18 Ø 18 mm 0,5 6,30 4,95 4,33 3,85 3,47 A
4375005 S22 Ø 22 mm 0,5 7,92 6,22 5,45 4,84 4,36 A
4375010 S8 Ø 8 mm 1,0 4,21 3,31 2,89 2,57 2,31 A
4375010 S11 Ø 11 mm 1,0 5,23 4,11 3,60 3,20 2,88 A
4375010 S13 Ø 13 mm 1,0 6,08 4,78 4,18 3,72 3,35 A
4375010 S18 Ø 18 mm 1,0 8,84 6,95 6,08 5,41 4,86 A
4375010 S22 Ø 22 mm 1,0 11,37 8,94 7,82 6,95 6,26 A
4375015 S8 Ø 8 mm 1,5 5,01 3,94 3,45 3,06 2,76 A
4375015 S11 Ø 11 mm 1,5 6,38 5,01 4,39 3,90 3,51 A
4375015 S13 Ø 13 mm 1,5 7,52 5,91 5,17 4,60 4,14 A
4375015 S18 Ø 18 mm 1,5 11,21 8,81 7,71 6,85 6,16 A
4375015 S22 Ø 22 mm 1,5 14,59 11,46 10,03 8,92 8,02 A
4375020 S8 Ø 8 mm 2,0 6,08 4,77 4,18 3,71 3,34 A
4375020 S11 Ø 11 mm 2,0 7,90 6,21 5,43 4,83 4,35 A
4375020 S13 Ø 13 mm 2,0 9,42 7,40 6,48 5,76 5,18 A
4375020 S18 Ø 18 mm 2,0 14,34 11,27 9,86 8,76 7,89 A
4375020 S22 Ø 22 mm 2,0 18,85 14,81 12,96 11,52 10,37 A
4375030 S8 Ø 8 mm 3,0 7,86 6,18 5,41 4,81 4,33 A
4375030 11 Ø 11 mm 3,0 10,45 8,21 7,19 6,39 5,75 A
4375030 S13 Ø 13 mm 3,0 12,61 9,91 8,67 7,71 6,94 A
4375030 S18 Ø 18 mm 3,0 19,60 15,40 13,47 11,98 10,78 A
4375030 S22 Ø 22 mm 3,0 26,00 20,43 17,88 15,89 14,30 A
(*) Delivery time: A = in stock, B = about 1 week (from partner stock), C = new production, by agreement
(**) Trademark of Dupont Performance Elastomers
Also available in LEZ-VITFLON (FKM/PTFE), please ask us.
Other dimensions on reqest
from fluoroelastomer Viton®(**); 75 +/-5 Shore A; black; first-class quality; compliant: UL94V0; good resistance
against aliphatic, aromatic and halogen-substituted hydrocarbons, alcohols, glycols, fuels and hydraulic fluids;
flame-resistant; operating temperature -10 °C to + 250 °C; peaks up to + 300°C
Code n° Size
Thickness
Butyl/PTFE
in mm
Price €/100 pieces
NEW 7 Subject to prior sale Vers. 20|05
Teil 4 Rubber stoppers and septa
Septa from LEZ-VITCHEM 70 GF Viton® plateQuality
Application liquid chromatography, gas chromatography
Packaging units 50 pieces
Stock
up to 4 PU >= 5 PU >= 10 PU >= 20 PU >= 50 PU (*)
4370010GFS8 Ø 8 mm 1,0 7,60 5,97 5,23 4,64 4,18 A
4370010GFS11 Ø 11 mm 1,0 10,08 7,92 6,93 6,16 5,54 A
4370010GFS13 Ø 13 mm 1,0 12,14 9,54 8,35 7,42 6,68 A
4370010GFS18 Ø 18 mm 1,0 18,82 14,79 12,94 11,50 10,35 A
4370010GFS22 Ø 22 mm 1,0 24,95 19,60 17,15 15,24 13,72 A
4370015GFS8 Ø 8 mm 1,5 9,88 7,76 6,79 6,04 5,43 A
4370015GFS11 Ø 11 mm 1,5 13,33 10,47 9,16 8,15 7,33 A
4370015GFS13 Ø 13 mm 1,5 16,21 12,73 11,14 9,90 8,91 A
4370015GFS18 Ø 18 mm 1,5 25,52 20,05 17,54 15,59 14,04 A
4370015GFS22 Ø 22 mm 1,5 34,05 26,75 23,41 20,81 18,73 A
4370020GFS8 Ø 8 mm 2,0 11,70 9,19 8,05 7,15 6,44 A
4370020GFS11 Ø 11 mm 2,0 15,94 12,52 10,96 9,74 8,77 A
4370020GFS13 Ø 13 mm 2,0 19,47 15,30 13,38 11,90 10,71 A
4370020GFS18 Ø 18 mm 2,0 30,89 24,27 21,24 18,88 16,99 A
4370020GFS22 Ø 22 mm 2,0 41,35 32,49 28,43 25,27 22,74 A
4370030GFS8 Ø 8 mm 3,0 6,08 4,77 4,18 3,71 3,34 A
4370030GFS11 Ø 11 mm 3,0 7,90 6,21 5,43 4,83 4,35 A
4370030GFS13 Ø 13 mm 3,0 9,42 7,40 6,48 5,76 5,18 A
4370030GFS18 Ø 18 mm 3,0 14,34 11,27 9,86 8,76 7,89 A
4370030GFS22 Ø 22 mm 3,0 18,85 14,81 12,96 11,52 10,37 A
(*) Delivery time: A = in stock, B = about 1 week (from partner stock), C = new production, by agreement
(**) Trademark of Dupont Performance Elastomers
Chemical|Petrochemical
Industries
Also available in LEZ-VITFLON (FKM/PTFE), please ask us.
Other dimensions on reqest
Code n° SizePrice €/100 pieces
100 % fluoroelastomer made of a special Viton® (**) type GF with high fluorine-content; 70 +/-5 Shore A; black;
compliant: FDA §177.2600, 2002/95/EC, 2011/65/EC, UL94V0; very good resistance against aliphatic,
aromatic and halogen-substituted, hydrocarbons, gasoline, biodiesel, oils, glycols, cooling agents and hydraulic
fluids; particularly impermeable to gas; operating temperature -8 °C to +200 °C, peaks to +300 °C
Thickness
Butyl/PTFE
in mm
Vers. 20|05 Subject to prior sale NEW 8
Part 1 Tubes
LEZ-LAB Laboratory tube Lab|Technology
Quality
Tolerance ISO DIN 3302.1 E2
Application
Coil length up to 10x2 (14) mm: 50 meter coil; from 12x2 (18) mm and over: 25 meter coil
Dimensions Stock
Di x wall (Dex) 5 - 24 m >= 25 m >=100 m >=300 m (*)
1002010 2 x 1 (4) 1,95 1,26 1,06 0,93 A
1003010 3 x 1 (5) 1,56 1,03 0,87 0,75 A
1003015 3 x 1,5 (6) 1,61 1,06 0,88 0,77 A
1004010 4 x 1 (6) 1,67 1,09 0,89 0,78 A
1004015 4 x 1,5 (7) 1,78 1,12 0,93 0,79 A
1004020 4 x 2 (8) 2,11 1,31 1,06 0,93 A
1005015 5 x 1,5 (8) 1,89 1,16 0,97 0,84 B
1005020 5 x 2 (9) 2,11 1,49 1,27 1,10 A
1006015 6 x 1,5 (9) 1,89 1,22 1,00 0,88 A
1006020 6 x 2 (10) 2,40 1,64 1,31 1,16 A
1006030 6 x 3 (12) 4,79 2,95 2,54 2,28 A
1007015 7 x 1,5 (10) 2,11 1,37 1,10 0,97 B
1007020 7 x 2 (11) 2,67 1,82 1,43 1,25 A
1008020 8 x 2 (12) 2,78 2,00 1,63 1,39 A
1009020 9 x 2 (13) 3,39 2,28 1,79 1,55 A
1010020 10 x 2 (14) 3,62 2,46 2,00 1,69 A
1012030 12 x 3 (18) 5,90 4,06 3,25 2,85 A
1015030 15 x 3 (21) 6,34 4,49 3,67 3,24 A
1018030 18 x 3 (24) 8,13 5,67 4,66 4,06 A
1020040 20 x 4 (28) 12,86 9,47 8,04 7,19 A
1020050 20 x 5 (30) 16,03 11,50 10,07 9,06 B
1025040 25 x 4 (33) 15,42 10,83 9,13 8,12 B
LEZ-VAC Vacuum tube Lab|Technology
Quality
Tolerance
Application
Coil length
Dimensions Stock
Di x wall (Dex) 5- 24 m >=25 m >=100 m >=300 m (*)
1003030 V 3 x 3 (9) 3,95 2,65 2,24 1,99 A
1004040 V 4 x 4 (12) 4,67 3,48 2,94 2,59 B
1005050 V 5 x 5 (15) 5,57 3,98 3,32 2,94 A
1006050 V 6 x 5 (16) 6,23 4,51 3,79 3,32 A
1006060 V 6 x 6 (18) 8,79 6,47 5,46 4,95 B
1007050 V 7 x 5 (17) 7,23 4,98 4,19 3,70 A
1008050 V 8 x 5 (18) 7,79 5,46 4,38 3,89 A
1008060 V 8 x 6 (20) 9,07 6,81 5,72 5,15 A
1010050 V 10 x 5 (20) 8,63 6,41 4,93 4,51 A
1010080 V 10 x 8 (26) 19,14 14,27 12,12 10,95 B
>= 5 m >= 20 m >= 50 m >= 100 m
1010100 V 10 x 10 (30) 22,26 16,94 15,11 13,61 A
1012080 V 12 x 8 (28) 25,27 18,59 15,77 14,27 A
1015080 V 15 x 8 (31) 26,88 19,88 16,76 15,11 B
(*) Delivery time: A = in stock, B = about 1 week (from partner stock), C = new production, by agreement
Other dimensions, food and quality on request
rubber; 50 +/- 5 Shore A; red; similar to DIN 12865; operating temperature from -30 °C to +70 °C
rubber; 50 +/- 5 Shore A; red; similar to DIN 12865; operating temperature from -30 °C to +70 °C
laboratory, vacuum pumps, mechanical engineering and equipment manufacturing
up to 10x8 (26) mm: 25 meter coil; from 10x10 (30) and over: 10 m coil
Code n°Quantity in meters €/m
laboratory, filling technology, mechanical engineering and equipment manufacturing
Code n°Quantity in meters €/m
ISO DIN 3302.1 E2
Page 4 Subject to prior sale Vers. 20|05
Part 1 Tubes
LEZ-VIN Natural rubber tube Food
Quality
Tolerance ISO DIN 3302.1 E2
Application oenology, beverage industry, dairy industry
Coil length up to 10x2 (14) mm: 40 m; 12x2,5 (17) mm: 25 m
Dimensions Stock
Di x wall (Dex) 5 - 39 m >= 40 m >=120 m >=240 m (*)
2206020 6 x 2 (10) 3,34 1,71 1,44 1,28 A
2208020 8 x 2 (12) 4,12 2,14 1,78 1,61 A
2210020 10 x 2 (14) 4,79 2,50 2,07 1,86 A
5 - 24 m >= 25 m >= 100 m >= 200 m
2212025 12 x 2,5 (17) 7,24 3,94 3,22 2,88 A
LEZ-THERMOBLOND TPE tube Food|Med
Quality
Tolerance
Application
laboratory, medicine, pharmacy, biology, food industry
Coil length up to 20x3,5 (35) mm: 25 m; from 25x5 (35) and over: 5 m
Dimensions Stock
Di x wall (Dex) 5 - 24 m >= 25 m >=100 m >=500 m (*)
2101010 1 x 1 (3) 1,85 1,07 0,87 0,82 A
2102010 2 x 1 (4) 1,98 1,14 0,93 0,88 A
2103010 3 x 1 (5) 2,09 1,18 0,98 0,93 A
2104010 4 x 1 (6) 2,20 1,27 1,00 0,95 A
2104015 4 x 1,5 (7) 2,41 1,49 1,21 1,15 A
2105015 5 x 1,5 (8) 2,52 1,64 1,31 1,25 A
2105020 5 x 2 (9) 2,89 1,91 1,54 1,47 A
2105025 5 x 2,5 (10) 3,53 2,56 2,10 2,00 A
2106015 6 x 1,5 (9) 2,62 1,72 1,42 1,35 A
2106020 6 x 2 (10) 3,32 2,21 1,80 1,71 A
2107015 7 x 1,5 (10) 3,11 1,91 1,54 1,47 A
2107030 7 x 3 (13) 6,48 4,34 3,52 3,35 A
2108020 8 x 2 (12) 3,64 2,45 1,94 1,84 A
2110020 10 x 2 (14) 4,39 2,64 2,25 2,14 A
2110025 10 x 2,5 (15) 5,09 3,25 2,64 2,51 A
2112025 12 x 2,5 (17) 5,41 3,65 2,95 2,81 A
2115030 15 x 3 (21) 8,03 5,50 4,35 4,13 A
2118030 18 x 3 (24) 10,39 6,98 5,58 5,30 A
2120035 20 x 3,5 (27) 12,59 8,54 6,98 6,63 A
2120050 20 x 5 (30) 18,54 12,60 10,30 9,79 C
5 - 19 m >= 20 m >=b 50 m >= 100 m
2125050 25 x 5 (35) 24,26 15,81 13,41 12,05 A
2130050 30 x 5 (40) 25,92 17,47 14,76 13,18 A
2140050 40 x 5 (50) 32,56 22,44 18,97 17,02 A
2150050 50 x 5 (60) 58,92 30,93 26,14 23,46 A
(*) Delivery time: A = in stock, B = about 1 week (from partner stock), C = new production, by agreement
Natural rubber; 50 +/-5 Shore; red-brick; without inlet; compliant: BfR XXI; operating temperature -40 °C to +75 °C
Other dimensions and colors on request
TPE to Polyisoprene, alternative to NR and Latex (also called "english type")
40 +/-5 Shore A; amber-coloured; density= 1,0; compliant: FDA §177.2600; EG1935/2004; EC10/2011;
operating temperature -50 °C to +90 °C; very good ageing resistance; does not contain allergens in contrast to natural
Latex
Code n°Quantity in meters €/m
Code n°
Thermoplastic elastomer – Alternative for Latex tube
ISO DIN 3302.1 E2
Quantity in meters €/m
Vers. 20|05 Subject to prior sale Page 5
Part 1 Tubes
LEZ-NIT Nitrile tube Technology
Quality
Tolerance ISO DIN 3302.1 E2
Application laboratory, chemistry, petrochemical industry, automobile industry, mechanical engineering
Coil length up to 8x2 (12) mm: 50 m | from 10x2 (14) mm and over: 25 m
Dimensions Stock
Di x wall (Dex) 10 - 49 m >= 50 m >= 200 m >= 500 m (*)
1903010 3 x 1 (5) 1,47 0,78 0,62 0,50 A1903015 3 x 1,5 (6) 1,86 0,93 0,73 0,63 A1903020 3 x 2 (7) 2,29 1,20 0,96 0,82 A1904010 4 x 1 (6) 1,74 0,86 0,69 0,57 A1904015 4 x 1,5 (7) 1,97 1,01 0,80 0,69 A1905015 5 x 1,5 (8) 2,18 1,09 0,89 0,79 A1905020 5 x 2 (9) 2,89 1,55 1,25 1,11 A1906015 6 x 1,5 (9) 2,51 1,27 1,02 0,89 A1906020 6 x 2 (10) 3,11 1,70 1,36 1,21 A1907015 7 x 1,5 (10) 2,62 1,38 1,13 1,00 A1907020 7 x 2 (11) 3,22 1,85 1,48 1,32 A1908020 8 x 2 (12) 3,66 2,02 1,61 1,43 A1909020 9 x 2 (13) 3,77 2,22 1,79 1,54 A
5 - 24 m >= 25 m >=100 m >=250 m
1910020 10 x 2 (14) 4,04 2,43 1,97 1,66 A1912020 12 x 2 (16) 4,97 2,98 2,39 2,04 A1912025 12 x 2,5 (17) 7,15 4,23 3,41 2,91 A1912030 12 x 3 (18) 8,63 5,25 4,24 3,60 A191400 14 x 5 (24) 15,61 9,94 7,41 6,85 A
1915030 15 x 3 (21) 9,39 5,68 4,63 3,91 A1918030 18 x 3 (24) 10,37 6,63 5,38 4,59 A1920035 20 x 3,5 (27) 13,75 8,52 6,91 5,91 A1925035 25 x 3,5 (32) 16,87 10,42 8,41 7,18 A
LEZ-NEO Chloroprene tube Technology
Quality
Tolerance ISO DIN 3302.1 E2
ApplicationCoil length up to 8x2 (12) mm: 50 m | from 10x2 (14) mm and over: 25 m
Dimensions Stock
Di x wall (Dex) 10 - 49 m >= 50 m >= 200 m >= 500 m (*)
2002010 2 x 1 (4) 1,53 0,81 0,68 0,59 A2002020 2 x 2 (6) 1,91 1,01 0,83 0,69 A2003010 3 x 1 (5) 1,75 0,88 0,74 0,63 A2003015 3 x 1,5 (6) 2,18 1,19 1,03 0,88 A2004010 4 x 1 (6) 1,86 0,94 0,80 0,68 A2004015 4 x 1,5 (7) 2,18 1,15 0,98 0,81 A2004020 4 x 2 (8) 3,00 1,57 1,28 1,06 A2005015 5 x 1,5 (8) 2,62 1,35 1,12 0,95 A2006015 6 x 1,5 (9) 3,00 1,52 1,27 1,06 A2006020 6 x 2 (10) 3,33 1,83 1,54 1,29 A2007015 7 x 1,5 (10) 3,22 1,70 1,43 1,19 A2008020 8 x 2 (12) 4,10 2,17 1,82 1,52 A
5 - 24 m >= 25 m >=100 m >=250 m
2010020 10 x 2 (14) 4,31 2,31 2,02 1,75 A2012020 12 x 2 (16) 4,97 2,67 2,31 2,02 A2012025 12 x 2,5 (17) 6,44 3,42 2,98 2,59 A2015030 15 x 3 (21) 9,06 4,91 4,27 3,71 A2018030 18 x 3 (24) 10,26 5,74 5,00 4,36 A2020035 20 x 3,5 (27) 12,50 7,05 6,13 5,59 A2022035 22 x 3,5 (29) 14,91 8,23 7,16 6,18 A2025035 25 x 3,5 (32) 16,43 9,22 7,98 6,91 A
(*) Delivery time : A = in stock, B = about 1 week (from partner stock), C = new production, by agreement(**) Trademark of Buna Werke
(***) Trademark of Dupont Performance Elastomers
Other qualities ( Food, KTW...) and dimensions on request
Code n°
Code n°
Chloroprene (Neoprene (***)); 65 +/-5 Shore A; black; density= 1,3; good resistance against mineral and vegetable
oils, fats, fuels, glycols, aliphatic solvents; resistant to alkaline solutions, saline solutions and diluted acids; resistant
to ozone, water and different weather conditions; good ageing resistance; operating temperature -30 °C to +90 °C,
peaks up to +120 °C
NBR (Perbunan (**)); 65 +/-5 Shore A; black; density= 1,25; resistant to mineral oils, vegetable oils, fats, fuels,
alcohols, glycols, aliphatic solvents; operating temperature -30 °C to +100 °C, peaks up to +120 °C
laboratory, chemistry, petrochemical industry, automobile industry, mechanical engineering
Quantity in meters €/m
Quantity in meters €/m
Page 6 Subject to prior sale Vers. 20|05
Part 1 Tubes
LEZ-PERIFLEX TubeTube TPE for peristaltic pumps
Quality
Tolerance
Application
Coil length 25 m (minimum delivery: 5 m)
Dimensions Stock
DI x wall (Dext) 5 - 24m >= 25 m >= 100 m >= 200 m (*)
Metric dimensions
8202010 2 x 1 (4) 2,35 1,47 1,18 1,00 A
8202510 2,5 x 1 (4,5) 2,75 1,71 1,37 1,15 A
8203010 3 x 1 (5) 3,10 1,94 1,55 1,29 A
8204010 4 x 1 (6) 3,35 2,11 1,69 1,42 A
8204020 4 x 2 (8) 5,65 3,73 2,99 2,49 A
8205015 5 x 1,5 (8) 5,25 3,25 2,60 2,15 A
8206015 6 x 1,5 (9) 5,55 3,61 2,89 2,40 A
8206020 6 x 2 (10) 8,05 5,00 3,99 3,32 A
8208020 8 x 2 (12) 9,15 5,97 4,77 3,97 A
8210020 10 x 2 (14) 10,80 7,23 5,78 4,83 A
8212020 12 x 2 (16) 12,15 8,08 6,46 5,39 A
8215030 15 x 3 (21) 18,75 14,77 12,34 10,30 A
8218030 18 x 3 (24) 23,05 17,86 15,01 12,57 A
8220030 20 x 3 (26) 27,00 21,43 17,86 14,93 A
8225050 25 x 5 (35) 48,00 38,50 32,10 26,80 C
8230050 30 x 5 (40) 56,00 44,00 36,50 30,50 C
British dimensions
8200816 0,8 x 1,6 (4,0) 3,25 1,96 1,56 1,30 A
8201616 1,6 x 1,6 (4,8) 3,80 2,44 1,94 1,63 A
8202416 2,4 x 1,6 (5,6) 4,20 2,65 2,12 1,77 A
8203216 3,2 x 1,6 (6,4) 4,65 2,86 2,30 1,91 A
8204016 4,0 x 1,6 (7,2) 5,19 3,19 2,56 2,13 A
8204816 4,8 x 1,6 (8,0) 5,25 3,42 2,74 2,28 A
8206416 6,4 x 1,6 (9,6) 6,30 4,28 3,42 2,85 A
8206424 6,4 x 2,4 (11,2) 10,90 7,81 6,25 5,19 A
8208024 8,0 x 2,4 (12,8) 15,35 8,56 6,85 5,70 A
8209524 9,5 x 2,4 (14,3) 16,15 9,78 7,81 6,51 A
8209532 9,5 x 3,2 (15,9) 22,30 13,49 10,79 8,99 A
8212732 12,7 x 3,2 (19,1) 25,55 17,35 13,86 11,55 A
8215932 15,9 x 3,2 (22,3) 26,80 20,25 16,70 13,50 A
8215948 15,9 x 4,8 (25,5) 42,55 32,15 25,71 21,43 A
8219032 19,0 x 3,2 (25,4) 31,30 23,05 18,42 15,33 A
8219048 19,0 x 4,8 (28,6) 49,65 36,59 29,24 24,34 A
8225448 25,4 x 4,8 (35,0) 59,45 46,24 37,06 30,62 A
(*) Delivery time: A = in stock , B = about 1 week (from partner stock), C = new production, by agreement
(**)
(***)
Medical Grade according to USP Class VI and ISO 10993 on request
Other dimensions, hardnesses and colors on request
The monomers, row materials and additives are listed in Annex I of the Regulation 10/2011/EC as amended by 321/2011/EC
(restriction of use of BPA in plastic infant feeding bottles), 1282/2011/EC, 1183/2012/EC, 202/2014/EC, 174/2015/EC, and
1416/2016/EC, respectively, related to Plastic Materials and Articles intended to come into contact with foodstuffs. The end user
has the responsibility to ensure by appropriate tests (migration tests) that the used final product is suitable for its purpose.
Food|Med|Pharma
Code n°
TPE 65 +/-5 Shore A; Density= 0,9; translucent; compliant: EC 10/2011 (***), FDA 21CFR §177.1520 for food
contacts; very good chemical resistance to aquaeous solutions, against acids, bases and a lot of organic solvents;
operating temperature -40 °C to +100 °C (peaks up to +120 °C in hot air);
Fatigue strength: approx. 30 million flexions (depends on dimensions and pumps) (**)
for peristaltic pumps in laboratory, pharmacy, medicine, chemistry, biology, filling technologies, in cosmetics, food
and beverage industry, mechanical engineering and equipment manufacturing
Particularly well suited for peristaltic pumps and precise dosage
ISO DIN 3302.1 E1 for precise dosage
Quantity in meters €/m
Operating time tested with a tube 4,8x1,6 mm (Dext=8,0) in a peristaltic pump with three rollers by 150 r.p.m.
Vers. 20|05 Subject to prior sale Page 7
Part 1 Tubes
LEZ-SAN Santoprene® tube Food|Pharma|Med
Santoprene® tube for peristaltic pumpsQuality
Tolerance ISO DIN 3302.1 E1
Application
Coil length 25 m (minimum delivery: 5 m)
Dimensions Stock
Di x wall (Dex) 5 - 24m >= 25 m >=100 m >= 200 m (*)
Metric dimensions
1401510 1,5x1 (3,5) 1,99 1,25 1,06 0,90 A1402010 2 x 1 (4) 2,25 1,41 1,13 0,95 A1402510 2,5x1 (4,5) 2,68 1,63 1,32 1,09 A1403010 3 x 1 (5) 3,00 1,85 1,48 1,23 A1404010 4 x 1 (6) 3,21 2,02 1,62 1,35 A1404020 4 x 2 (8) 5,46 3,57 2,86 2,38 A1405015 5 x 1,5 (8) 5,03 3,11 2,49 2,06 A1406005 6 x 0,5 (7) 3,96 2,40 1,93 1,55 A1406015 6 x 1,5 (9) 5,46 3,46 2,76 2,29 A1406020 6 x 2 (10) 7,71 4,78 3,81 3,18 A1407020 7 x 2 (11) 8,14 5,40 4,32 3,60 A1408020 8 x 2 (12) 8,78 5,71 4,56 3,80 A1409010 9 x 1 (11) 7,71 4,43 3,48 2,87 A1410020 10 x 2 (14) 10,34 6,91 5,53 4,62 A1410025 10 x 2,5 (15) 10,71 7,02 5,60 4,67 A1412020 12 x 2 (16) 11,57 7,73 6,18 5,16 A1412030 12 x 3 (18 14,09 10,71 8,93 4,96 A1412040 12 x 4 (20) 18,64 14,66 12,26 10,24 A1413020 13 x 2 (17) 12,64 8,51 6,80 5,68 A1415030 15 x 3 (21) 17,94 14,13 11,80 9,85 A1418030 18 x 3 (24) 22,07 17,08 14,36 12,02 A1420025 20 x 2,5 (25) 21,69 16,72 13,97 11,64 A1420030 20 x 3 (26) 25,82 20,50 17,08 14,28 A1420050 20 x 5 (30) 38,73 31,83 26,70 22,52 A1421020 21 x 2 (25) 18,32 14,34 12,06 10,17 A1422015 22 x 1,5 (25) 16,49 12,49 10,50 8,87 A1425050 25 x 5 (35) 35,23 29,85 25,53 C1430050 30 x 5 (40) 40,90 34,77 29,70 C
British dimensions
1400816 0,8 x 1,6 (4,0) 3,11 1,87 1,49 1,25 A1401616 1,6 x 1,6 (4,8) 3,64 2,33 1,86 1,56 A1402416 2,4 x 1,6 (5,6) 3,86 2,56 2,05 1,71 A1403216 3,2 x 1,6 (6,4) 4,39 2,74 2,20 1,83 A1403224 3,2 x 2,4 (8,0) 7,50 4,80 3,85 3,20 A1403232 3,2 x 3,2 (9,5) 9,32 5,80 4,65 3,88 A1404016 4,0 x 1,6 (7,2) 4,71 3,07 2,47 2,07 A1404816 4,8 x 1,6 (8,0) 5,03 3,27 2,62 2,18 A1404824 4,8 x 2,4 (9,5) 8,68 5,52 4,42 3,69 A1406416 6,4 x 1,6 (9,5) 6,00 4,09 3,27 2,73 A1406424 6,4 x 2,4 (11,1) 10,50 7,47 5,98 4,96 A1406432 6,4 x 3,2 (12,7) 12,05 7,96 6,36 5,30 A1408016 8,0 x 1,6 (11,1) 6,96 4,56 3,63 3,04 A1408024 8,0 x 2,4 (12,7) 14,67 8,19 6,55 5,45 A1409524 9,5 x 2,4 (14,3) 13,50 9,36 7,47 6,22 A1409532 9,5 x 3,2 (15,9) 20,46 13,33 10,66 8,88 A1412732 12,7 x 3,2 (19,0) 24,42 16,60 13,26 11,05 A1415948 15,9 x 4,8 (25,4) 40,65 30,75 24,59 20,50 A1419048 19,0 x 4,8 (28,5) 47,50 34,99 27,97 23,28 A1425448 25,4 x 4,8 (34,9) 56,82 44,23 35,44 29,29 A
(*) Delivery time: A = in stock, B = about 1 week (from partner stock), C = new production, by agreement
(**) Trademark of ExxonMobil
(***)
Code n°
Other dimensions, hardnesses and colors on request
Quantity in meters €/m
Santoprene® (**); 65 +/- 5 Shore A; Density: 0,97; light beige; compliant: FDA §177.2600, NSF51, Global
migration conform acc. to EU 10/2011; good chemical resistance in aqueous environment against acids and a
many of organic solvents (in particular ketons, eters, ethers, aldehydes; operating temperature -45 °C to +135 °C
(peaks up to +150 °C); Fatigue strength: approx. 30 million flexions (depends on dimensions and pumps) (***)
Particularly well suited for peristaltic pumpspharmacy, medicine, chemistry, biology, filling technologies, oenology, beverage industry, mechanical engineering
and equipment manufacturing
Operating time tested with a tube 4,8x1,6 mm (Dext=8,0) in a peristaltic pump with three rollers by 150 r.p.m.
Page 8 Subject to prior sale Vers. 20|05
Part 1 Tube
LEZ-SANSOFT Santoprene® tubeSantoprene® tube for peristaltic pumps
Quality
Tolerance ISO DIN 3302.1 E1
Application
Coil length 25 m (minimum delivery: 5 m)
Dimensions Stock
Di x wall (Dex) 5 - 24m >= 25 m >=100 m >= 200 m (*)
Metric dimensions
1402010 SO 2 x 1 (4) 2,32 1,45 1,17 0,98 A
1402510 SO 2,5x1 (4,5) 2,76 1,68 1,36 1,12 A
1403010 SO 3 x 1 (5) 3,09 1,91 1,52 1,27 A
1404010 SO 4 x 1 (6) 3,31 2,08 1,66 1,39 A
1404020 SO 4 x 2 (8) MQ=200 m 2,45 C
1405015 SO 5 x 1,5 (8) 5,18 3,20 2,56 2,12 A
1406015 SO 6 x 1,5 (9) 5,62 3,56 2,84 2,36 A
1406020 SO 6 x 2 (10) 7,94 4,92 3,92 3,27 A
1407020 SO 7 x 2 (11) 8,38 5,56 4,44 3,70 A
1408020 SO 8 x 2 (12) 9,04 5,87 4,70 3,91 A
1410020 SO 10 x 2 (14) 10,64 7,11 5,69 4,75 A
1412030 SO 12 x 3 (18 MQ=100 m 9,19 5,11 C
1415030 SO 15 x 3 (21) MQ=50 m 14,54 12,15 10,14 C
1418030 SO 18 x 3 (24) MQ=50 m 17,58 14,78 12,37 C
1420050 SO 20 x 5 (30) MQ=25 m 32,76 27,48 23,17 C
1425050 SO 25 x 5 (35) MQ=25 m 36,26 30,72 26,27 C
1430050 SO 30 x 5 (40) MQ=25 m 42,09 35,79 30,57 C
British dimensions
1400816 SO 0,8 x 1,6 (4,0) MQ=300 m 1,28 C
1401616 SO 1,6 x 1,6 (4,8) 3,75 2,40 1,91 1,60 A
1402416 SO 2,4 x 1,6 (5,6) 4,10 2,64 2,10 1,76 A
1403216 SO 3,2 x 1,6 (6,4) 4,52 2,82 2,26 1,88 A
1403224 SO 3,2 x 2,4 (8,0) MQ=200 m 3,29 C
1404016 SO 4,0 x 1,6 (7,2) 4,85 3,16 2,54 2,13 A
1404816 SO 4,8 x 1,6 (8,0) 5,18 3,36 2,69 2,25 A
1404824 SO 4,8 x 2,4 (9,5) 8,93 5,68 4,55 3,80 A
1406416 SO 6,4 x 1,6 (9,5) 6,17 4,21 3,36 2,80 A
1406424 SO 6,4 x 2,4 (11,1) 10,80 7,69 6,15 5,11 A
1408016 SO 8,0 x 1,6 (11,1) MQ=200 m 3,13 C
1408024 SO 8,0 x 2,4 (12,7) 15,11 8,43 6,74 5,61 A
1409524 SO 9,5 x 2,4 (14,3) 13,89 9,62 7,69 6,40 A
1409532 SO 9,5 x 3,2 (15,9) 21,05 13,72 10,97 9,14 A
1412732 SO 12,7 x 3,2 (19,0) 25,13 17,08 13,65 11,37 A
(*) Lieferzeit: A = in stock, B = about 1 week (from partner stock), C = new production, by agreement
(**) Trademark of ExxonMobil
(***)
Other dimensions, hardnesses and colors on request
Quantity in meters €/m
Food|Med|Pharma
Code n°
Santoprene® (**); 55 +/- 5 Shore A; Density: 0,96; light beige; compliant: FDA §177.2600, NSF51, Global
migration conform acc. to EU 10/2011; good chemical resistance in aqueous environment against acids and a
many of organic solvents (in particular ketons, eters, ethers, aldehydes; operating temperature -45 °C to +135 °C
(peaks up to +150 °C)
pharmacy, medicine, chemistry, biology, filling technologies, oenology, beverage industry, mechanical engineering
and equipment manufacturing
Particularly well suited for peristaltic pumps
Operating time tested with a tube 4,8x1,6 mm (Dext=8,0) in a peristaltic pump with three rollers by 150 r.p.m.
Vers. 20|05 Subject to prior sale Page 9
Part 1 Tubes
LEZ-SANMED BIO Santoprene® tubefor peristaltic pumps - biocompatible
Quality
Tolerance ISO DIN 3302.1 E2
Application
Coil length 25 m and 15 m (see tabel), (minimum delivery: 5 m)
Dimensions Stock
Di x wall (Dex) 5 - 24m >= 25 m >=100 m >= 200 m (*)
Metric dimensions:
1402010 med 2 x 1 (4) 4,38 2,62 2,07 1,75 A
1402510 med 2,5 x 1 (4,5) 4,64 2,99 2,37 2,01 A
1403010 med 3 x 1 (5) 4,94 3,18 2,52 2,14 A
1404010 med 4 x 1 (6) 5,97 3,52 2,79 2,36 A
1405015 med 5 x 1,5 (8) 9,06 5,40 4,27 3,56 A
1406015 med 6 x 1,5 (9) 10,09 6,03 4,78 3,97 A
1407015 med 7 x1,5 (10) 10,82 6,47 4,95 4,13 A
1408020 med 8 x 2 (12) 16,48 9,89 7,89 6,57 A
1410020 med 10 x 2 (14) MQ=50 m 11,90 9,56 7,98 C
1412030 med 12 x 3 (18) MQ=50 m 18,54 15,44 8,58 C
1415030 med 15 x 3 (21) MQ=50 m 24,41 20,41 17,04 C
1418030 med 18 x 3 (24) MQ=30 m 29,61 24,83 20,79 C
1420030 med 20 x 3 (26) MQ=30 m 35,43 29,54 24,69 C
1420050 med 20 x 5 (30) MQ=30 m 55,11 46,18 38,94 C
1425050 med 25 x 5 (35) MQ=30 m 60,98 51,63 44,15 C
British dimensions
1400816 med 0,8 x 1,6 (4,0) 5,15 3,37 2,68 2,25 A
1401616 med 1,6 x 1,6 (4,8) 6,28 4,05 3,21 2,70 A
1402416 med 2,4 x 1,6 (5,6) 7,00 4,45 3,57 2,98 A
1403216 med 3,2 x 1,6 (6,4) 7,52 4,72 3,80 3,17 A
1403224 med 3,2 x 2,4 (8,0) MQ=100 m 6,63 5,53 C
1403232 med 3,2 x 3,2 (9,5) MQ=100 m 8,10 6,71 C
1404016 med 4,0 x 1,6 (7,2) 8,38 5,55 4,44 3,59 A
1404816 med 4,8 x 1,6 (8,0) 8,55 5,62 4,53 3,77 A
1404824 med 4,8 x 2,4 (9,5) 14,21 9,48 7,64 6,38 A
1406416 med 6,4 x 1,6 (9,5) 10,35 7,08 5,65 4,71 A
1406424 med 6,4 x 2,4 (11,1) 19,31 12,93 10,34 8,58 A
1406432 med 6,4 x 3,2 (12,7) MQ=50 m 13,83 11,00 9,17 C
1408016 med 8,0 x 1,6 (11,1) MQ=100 m 6,28 5,25 C
1408024 med 8,0 x 2,4 (12,7) 21,27 14,17 11,32 9,43 A
1409524 med 9,5 x 2,4 (14,3) 23,28 16,19 12,92 10,76 A
1409532 med 9,5 x 3,2 (15,9) MQ=50 m 23,05 18,43 15,36 C
1412732 med 12,7 x 3,2 (19,0) 42,23 28,68 22,93 19,11 A
1415948 med 15,9 x 4,8 (25,4) MQ=30 m 53,19 42,53 35,45 C
1419048 med 19,0 x 4,8 (28,5) 84,93 60,50 48,37 40,26 A
1425448 med 25,4 x 4,8 (34,9) 103,72 74,79 61,29 50,64 A
(*) Delivery time: A = in stock, B = about 1 week (from partner stock), C = new production, by agreement
(**) Trademark of ExxonMobil
(***)
On request: profiles, sheets and platesOther dimensions and hardnesses on request
Pharma|Med|Food
Code n°Quantity in meters €/m
Thermoplastic elastomer (Santoprene®(**)); 65 +/-5 Shore A; light beige; density= 0,92; compliant: FDA 21 CRF
§177.2600 (e), biocompatible according to USP Class VI, Global migration conform acc. to EU
10/2011; good chemical resistance in aqueous environments; against acids, bases, and a lot of organic solvents
(in particular ketones, esters, ethers, aldehydes…); operating temperature -45 °C to +135 °C, peaks up to +150 °C
Fatigue strength: approx. 30 million flexions (depends on dimensions and pumps) (***)
Particularly well suited for peristaltic pumps
for peristaltic pumps in laboratory, pharmacy, medicine, chemistry, biology, filling technologies, in cosmetics,
food and beverage industries, in œnology and wine production
up to 15x3 (21): 25 m; from 18x3 (24) and over: 15 m
up to 12,7x3,2 (19): 25 m; from 15,9x4,8 (25,4) and over: 15 m
Operating time tested with a tube 4,8x1,6 mm (Dext=8,0) in a peristaltic pump with three rollers by 150 r.p.m.
Page 10 Subject to prior sale Vers. 20|05
Part 1 Tubes
LEZ-SANPRESS Pressure tube Pharma|Med|Food
Quality
Tolerance ISO DIN 3302.1 E2
Application
Coil length 25 m
Dimensions Stock
ID x WT ( OD ) 5 - 24m >= 25 m >= 100 m (*)
6505030 5 x 3 (11) 8,14 6,07 5,06 > 35 A6506030 6 x 3 (12) 8,78 6,55 5,46 > 30 A6508030 8 x 3 (14) 10,07 7,52 6,27 > 25 A6510035 10 x 3,5 (17) 14,35 10,72 8,94 > 20 A6512535 12,5 x 3,5 (19,5) 16,28 12,17 10,15 > 18 A6516040 16 x 4 (24) 22,92 17,18 14,32 > 15 A6519045 19 x 4,5 (28) 30,10 22,61 18,85 > 12 A
(***) The maximum operating pressure is obtained by dividing the test pressure by 3
LEZ-SANTEC Santoprene® tube Technology
Quality
Tolerance ISO DIN 3302.1 E2
Application
Coil length up to 4x1 mm: 100 m; up to 8x2 mm: 50 m; from 10x2mm and over: 25 m
Dimensions Stock
Di x wall (Dex) 25 - 99m >=100 m >= 300 m >=500 m (*)
Metric dimensions
2402010 2 x 1 (4) 1,75 1,01 0,86 0,78 A2403010 3 x 1 (5) 1,85 1,10 1,05 0,93 A2404010 4 x 1 (6) 2,12 1,30 1,18 1,06 A
10 - 49m >=50 m >= 200 m >=500 m
2404015 4 x 1,5 (7) 2,86 1,61 1,40 1,21 A2405015 5 x 1,5 (8) 3,08 1,67 1,44 1,25 A2406015 6 x 1,5 (9) 3,18 1,73 1,50 1,30 A2406020 6 x 2 (10) 4,03 2,35 2,04 1,77 A2407015 7 x 1,5 (10) 3,39 1,88 1,62 1,41 A2408020 8 x 2 (12) 4,35 2,59 2,24 1,95 A
5 - 24m >= 25 m >=100 m >=300 m
2410020 10 x 2 (14) 5,09 3,09 2,69 2,34 A2412025 12 x 2,5 (17) 6,79 4,11 3,57 3,10 A2415030 15 x 3 (21) 11,46 7,08 6,15 5,34 A2418030 18 x 3 (21) 11,94 7,65 6,65 5,77 A2420035 20 x 3,5 (27) 13,37 8,81 7,65 6,65 A
British dimensions 10 - 49m >= 50 m >= 200 m >=500 m
2403216 3,2 x 1,6 (6,4) 2,65 1,60 1,38 1,20 A2404816 4,8 x 1,6 (8,0) 3,18 1,77 1,53 1,33 A2406416 6,4 x 1,6 (9,5) 3,50 2,05 1,79 1,54 A2409532 9,5 x 3,2 (15,9) 8,81 5,64 4,57 3,63 A
(*) Delivery time : A = in stock, B = about 1 week (from partner stock), C = new production, by agreement
(**) Trademark of ExxonMobil
Code n°
Code n°
Other dimensions, hardnesses and colors on request
laboratory, chemistry, mechanical engineering and equipment manufacturing
like LEZ-SAN; 65 +/-5 Shore; beige; with polyester fabric insert; compliant: FDA § 177.2600, EU 2003/11/EC,
NSF51; very good chemical resistance against aqueous media, medium-strength acids and bases; numerous organic
solvents such as ketones, aldehydes, esters, ethers and amines biologically neutral, odourless and tasteless;
operating temperature -45 °C to +135 °C, peak up to +150 °C
Particularly suitable for industrial peristaltic pumps
pharmacy, medical engineering, chemistry, biology, food and beverages industries, oenology, breweries, dairies,
mechanical engineering, equipment manufacturing, pneumatics/hydraulics
Santoprene® (**) is a thermoplastic elastomer type PP/EPDM; 60 +/- 5 Shore A; black; Density: 0,97; very
good chemical resistance in aqueous media against acids, bases and a many of organic solvents; very
good alternative to EPDM or Chloroprene (more cost-efficient in the long term); operating temperature
-45°C to +120 °C
Particularity: LEZ-SANTEC can be welded easily by heating
Quantity in meters €/m Test pressure in
bar (***)
Quantity in meters €/m
Vers. 20|05 Subject to prior sale Page 11
Part 1 Tubes
LEZ-SIL 60TF Silicone tube Food
Quality
Tolerance ISO DIN 3302.1 E2
Application laboratory, food and beverage industries, mechanical engineering.
Coil length 25 m
Dimensions Stock
Di x wall (Dex) 5 - 24 m >= 25 m >= 100 m >= 300 m >= 500 m (*)
1800510 0,5 x 1 (2,5) 0,77 0,34 0,28 0,25 0,23 A
1801004 1 x 0,4 (1,8) 0,87 0,42 0,38 0,35 0,33 A
1801005 1 x 0,5 (2) 0,77 0,32 0,25 0,23 0,20 A
1801010 1 x 1 (3) 0,87 0,41 0,35 0,32 0,29 A
1801015 1 x 1,5 (4) 1,47 0,70 0,59 0,55 0,53 A
1801507 1,5 x 0,75 (3) 0,87 0,41 0,35 0,32 0,29 A
1802005 2 x 0,5 (3) 0,77 0,37 0,29 0,25 0,23 A
1802010 2 x 1 (4) 0,98 0,47 0,40 0,35 0,32 A
1802015 2 x 1,5 (5) 1,47 0,72 0,64 0,59 0,56 A
1802020 2 x 2 (6) 1,97 0,95 0,80 0,72 0,66 A
1802520 2,5 x 2 (6,5) 2,95 1,61 1,42 1,33 1,24 A
1803005 3 x 0,5 (4) 0,87 0,40 0,34 0,31 0,28 A
1803010 3 x 1 (5) 1,15 0,54 0,48 0,46 0,42 A
1803015 3 x 1,5 (6) 1,80 0,88 0,75 0,70 0,64 A
1803020 3 x 2 (7) 2,07 1,08 0,98 0,94 0,89 A
1803515 3,5 x 1,5 (6,5) 1,97 1,01 0,91 0,84 0,78 A
1804005 4 x 0,5 (5) 0,98 0,44 0,37 0,34 0,31 A
1804010 4 x 1 (6) 1,47 0,66 0,57 0,52 0,48 A
1804015 4 x 1,5 (7) 2,07 1,02 0,86 0,79 0,72 A
1804020 4 x 2 (8) 2,84 1,39 1,23 1,15 1,07 A
1804030 4 x 3 (10) 4,36 2,28 2,11 2,04 1,98 A
1805005 5 x 0,5 (6) 1,37 0,57 0,48 0,46 0,42 A
1805010 5 x 1 (7) 1,69 0,83 0,75 0,71 0,67 A
1805015 5 x 1,5 (8) 2,18 1,11 0,95 0,90 0,86 A
1805020 5 x 2 (9) 3,44 1,68 1,50 1,43 1,36 A
1805025 5 x 2,5 (10) 4,48 2,36 2,09 2,00 1,90 A
1805030 5 x 3 (11) 5,13 2,61 2,36 2,28 2,21 A
1805040 5 x 4 (13) 7,31 4,24 3,82 3,63 3,44 A
1806005 6 x 0,5 (7) 1,58 0,73 0,62 0,58 0,54 A
1806010 6 x 1 (8) 2,07 1,01 0,87 0,80 0,75 A
1806015 6 x 1,5 (9) 2,51 1,29 1,17 1,09 1,02 A
1806020 6 x 2 (10) 3,28 1,73 1,51 1,39 1,30 A
1806030 6 x 3 (12) 5,35 2,81 2,61 2,51 2,41 A
1806040 6 x 4 (14) 7,31 4,07 3,77 3,63 3,50 A
1807010 7 x 1 (9) 2,29 1,14 1,01 0,95 0,90 A
1807015 7 x 1,5 (10) 2,84 1,46 1,29 1,19 1,11 A
1807020 7 x 2 (11) 3,66 1,93 1,77 1,68 1,60 A
1807030 7 x 3 (13) 6,33 3,29 3,04 2,92 2,81 A
1808010 8 x 1 (10) 2,73 1,38 1,23 1,15 1,08 A
1808015 8 x 1,5 (11) 3,28 1,68 1,48 1,37 1,27 A
1808020 8 x 2 (12) 3,88 2,08 1,86 1,76 1,65 A
1808030 8 x 3 (14) 7,10 3,92 3,51 3,32 3,15 A
1808040 8 x 4 (16) 9,12 5,56 4,98 4,70 4,46 A
Code n°
Silicone; 60 +/-5 Shore A; translucent; peroxide-vulcanized; compliant: FDA §177.2600, BfR XV, EC
1935/2004 ; operating temperature -60 °C to +200 °C, peaks up to +220°C
Quantity in meters €/m
Seite 12 Continued on page 13 Vers. 20|05
Part 1 Tubes
LEZ-SIL 60TF Silicone tube Food
(Following)
Dimensions Stock
Di x wall (Dex) 5 - 24 m >= 25 m >= 100 m >= 300 m >= 500 m (*)
1809020 9 x 2 (13) 4,44 2,38 2,16 2,00 1,96 A
1810010 10 x 1 (12) 2,86 1,52 1,36 1,29 1,22 A
1810020 10 x 2 (14) 4,92 2,53 2,27 2,15 2,04 A
1810025 10 x 2,5 (15) 6,60 3,42 3,12 2,97 2,83 A
1810030 10 x 3 (16) 7,14 3,84 3,55 3,41 3,26 A
1810040 10 x 4 (18) 9,41 5,58 5,15 4,92 4,71 A
1810050 10 x 5 (20) 13,25 7,53 6,94 6,64 6,36 A
1811020 11 x 2 (15) 5,57 2,87 2,59 2,48 2,39 A
1812010 12 x 1 (14) 3,73 1,97 1,80 1,71 1,65 A
1812020 12 x 2 (16) 5,57 2,90 2,68 2,58 2,46 A
1812030 12 x 3 (18) 8,76 4,57 4,23 4,09 3,94 A
1812040 12 x 4 (20) 14,33 8,04 7,71 7,55 7,39 A
1813020 13 x 2 (17) 5,89 3,19 2,93 2,80 2,68 A
1813030 13 x 3 (19) 10,33 5,44 5,00 4,75 4,49 A
1814020 14 x 2 (18) 6,49 3,35 3,08 2,95 2,81 A
1814030 14 x 3 (20) 10,92 5,80 5,22 4,96 4,71 A
1815020 15 x 2 (19) 7,14 3,94 3,55 3,37 3,20 A
1815030 15 x 3 (21) 9,84 5,44 4,96 4,73 4,49 A
1815050 15 x 5 (25) 18,49 10,88 9,90 9,45 9,00 A
1816020 16 x 2 (20) 7,57 4,05 3,70 3,56 3,42 A
1816030 16 x 3 (22) 12,98 7,03 6,13 5,88 5,62 A
1816040 16 x 4 (24) 14,22 7,83 7,25 7,00 6,74 A
1817040 17 x 4 (25) 16,71 10,15 9,13 8,65 8,19 A
1818020 18 x 2 (22) 10,11 5,58 5,06 4,84 4,64 A
1818030 18 x 3 (24) 11,36 6,02 5,54 5,31 5,10 A
1819030 19 x 3 (25) 12,98 7,18 6,60 6,34 6,09 A
1819040 19 x 4 (27) 17,25 10,51 9,57 9,24 8,91 A
1820020 20 x 2 (24) 10,71 5,73 5,29 5,07 4,86 A
1820030 20 x 3 (26) 12,98 7,07 6,52 6,27 6,02 A
1820035 20 x 3,5 (27) 14,33 8,26 7,61 7,31 7,03 A
1820040 20 x 4 (28) 18,49 10,87 9,86 9,49 9,13 A
1820050 20 x 5 (30) 19,85 12,18 11,23 10,87 10,51 A
1822040 22 x 4 (30) 17,79 10,96 10,11 9,79 9,46 A
1825010 25 x 1 (27) 8,87 4,90 4,66 4,49 4,34 A
1825020 25 x 2 (29) 9,84 5,45 5,15 4,99 4,83 A
1825030 25 x 3 (31) 16,01 9,13 8,41 8,07 7,75 A
1825040 25 x 4 (33) 20,55 12,32 11,52 11,19 10,87 A
1825050 25 x 5 (35) 22,60 15,36 14,35 13,91 13,48 A
1825060 25 x 6 (37) 25,31 18,26 17,10 16,53 15,94 B
1830030 30 x 3 (36) 18,66 11,81 10,62 10,05 9,48 A
1830050 30 x 5 (40) 23,96 17,25 16,09 15,58 15,07 A
1832020 32 x 2 (36) 15,41 8,70 7,83 7,43 7,04 A
1835050 35 x 5 (45) 27,90 19,71 18,41 17,83 17,25 B
1840050 40 x 5 (50) 32,01 22,18 20,73 20,07 19,42 A
(*) Delivery time: A = in stock, B = about 1 week (from partner stock), C = new production, by agreement
Quantity in meters €/mCode n°
Other dimensions, hardnesses and colors on request
Vers. 20|05 Subject to prior sale Page 13
Part 1 Tubes
LEZ-SIL 60TP Silicone tube Pharma|Med
Quality
Tolerance ISO DIN 3302.1 E2
Application
Coil length 25 m
Dimensions Stock
Di x wall (Dex) 5 - 24 m >= 25 m >= 100 m >=300 m >= 500 m (*)
1101005 1 x 0,5 (2) 0,78 0,37 0,30 0,27 0,26 A
1101010 1 x 1 (3) 1,11 0,60 0,50 0,44 0,42 A
1101510 1,5 x 1 (3,5) 1,34 0,76 0,63 0,58 0,54 A
1102005 2 x 0,5 (3) 1,00 0,52 0,44 0,40 0,36 A
1102010 2 x 1 (4) 1,34 0,79 0,64 0,58 0,54 A
1102015 2 x 1,5 (5) 1,94 1,27 1,05 0,97 0,90 A
1102020 2 x 2 (6) 2,73 1,61 1,31 1,22 1,17 A
1103005 3 x 0,5 (4) 1,11 0,58 0,50 0,43 0,40 A
1103010 3 x 1 (5) 1,50 0,90 0,78 0,71 0,66 A
1103015 3 x 1,5 (6) 2,39 1,35 1,15 1,06 1,01 A
1103020 3 x 2 (7) 3,06 1,90 1,53 1,43 1,35 A
1104005 4 x 0,5 (5) 1,22 0,66 0,54 0,50 0,44 A
1104010 4 x 1 (6) 1,84 1,05 0,87 0,79 0,75 A
1104015 4 x 1,5 (7) 2,78 1,62 1,33 1,23 1,17 A
1104020 4 x 2 (8) 3,67 2,25 1,86 1,72 1,61 A
1104030 4 x 3 (10) 6,06 4,05 3,36 3,11 2,90 A
1105005 5 x 0,5 (6) 1,34 0,74 0,60 0,55 0,51 A
1105010 5 x 1 (7) 2,28 1,25 1,06 0,98 0,92 A
1105015 5 x 1,5 (8) 3,06 1,73 1,53 1,41 1,33 A
1105020 5 x 2 (9) 4,01 2,61 2,16 1,97 1,86 A
1105025 5 x 2,5 (10) 5,23 3,43 2,83 2,61 2,51 A
1106005 6 x 0,5 (7) 1,34 0,82 0,70 0,63 0,56 A
1106010 6 x 1 (8) 2,28 1,42 1,22 1,19 1,05 A
1106015 6 x 1,5 (9) 3,39 2,09 1,76 1,58 1,46 A
1106020 6 x 2 (10) 4,62 2,88 2,39 2,21 2,02 A
1106030 6 x 3 (12) 7,46 4,77 3,97 3,61 3,28 A
1107015 7 x 1,5 (10) 3,78 2,39 1,94 1,77 1,62 A
1107020 7 x 2 (11) 5,23 3,32 2,91 2,48 2,29 A
1107030 7 x 3 (13) 7,79 5,29 4,36 3,95 3,58 A
1108010 8 x 1 (10) 3,06 1,76 1,49 1,35 1,23 A
1108015 8 x 1,5 (11) 4,34 2,76 2,21 2,00 1,84 A
1108020 8 x 2 (12) 5,34 3,58 2,91 2,63 2,43 A
1108030 8 x 3 (14) 8,51 5,59 4,62 4,26 3,95 A
1108040 8 x 4 (16) 12,02 8,06 6,93 6,34 5,96 A
1109020 9 x 2 (13) 5,96 3,95 3,18 2,91 2,68 A
1110010 10 x 1 (12) 3,39 2,12 1,73 1,57 1,45 A
1110020 10 x 2 (14) 6,34 4,18 3,43 3,10 2,86 A
1110025 10 x 2,5 (15) 7,90 5,52 4,48 4,14 3,91 A
1110030 10 x 3 (16) 9,96 6,57 5,37 4,87 4,53 A
1110040 10 x 4 (18) 14,36 9,54 7,76 7,04 5,15 A
1112020 12 x 2 (16) 7,57 5,07 4,02 3,73 3,43 A
1112030 12 x 3 (18) 12,02 8,06 6,42 5,92 5,44 A
1114020 14 x 2 (18) 9,12 5,96 4,77 4,36 3,95 A
1115020 15 x 2 (19) 9,73 6,42 5,07 4,62 4,18 A
1115030 15 x 3 (21) 13,52 9,10 7,43 6,84 6,26 A
1116020 16 x 2 (20) 9,96 6,57 5,21 4,77 4,33 A
1118030 18 x 3 (24) 15,81 10,44 8,58 7,98 7,31 A
1120020 20 x 2 (24) 11,80 7,91 6,26 5,78 5,29 A
1120030 20 x 3 (26) 17,97 14,02 11,78 10,67 10,15 B
1120050 20 x 5 (30) 26,82 20,44 17,01 15,59 14,77 A
1125040 25 x 4 (33) 25,65 18,50 14,84 14,10 13,35 A
1125050 25 x 5 (35) 28,21 23,27 20,74 18,79 17,75 B
(*) Delivery time: A = in stock, B = about 1 week (from partner stock), C = new production, by agreement
Other dimensions, hardnesses and colors on request
Code n°Quantity in meters €/m
Silicone; 60 +/-5 Shore A; transparent; peroxide-vulcanized; compliant: FDA §177.2600, BfR XV, biocompatible
according to USP Class VI, Ph.Eur. 3.1.9. (up to 2.5 mm wall thickness), EC 1935/2004 ; operating
temperature -60 °C to +200 °C, peaks up to +250 °C
pharmacy, medicine, biology, laboratory, food industries
Page 14 Subject to prior sale Vers. 20|05
Part 1 Tubes
LEZ-SIL 55TP Silicone tube Food|Pharma|Med
for peristaltic pumps
Quality
Tolerance ISO DIN 3302.1 E2
Application
Coil length 25 m
Dimensions Stock
Di x wall (Dex) 5 - 24 m >= 25 m >= 100 m >= 250 m >= 500 m (*)
1500816 0,8 x 1,6 (4,0) 2,78 1,43 1,01 0,86 0,72 A
1501608 1,6 x 0,8 (3,2) 2,28 1,15 0,86 0,75 0,64 A
1501616 1,6 x 1,6 (4,8) 3,06 1,55 1,09 0,97 0,84 A
1502506 2,5 x 0,6 (3,7) 2,67 1,48 1,03 0,89 0,77 A
1503216 3,2 x 1,6 (6,4) 4,23 2,20 1,54 1,37 1,19 A
1504208 4,2 x 0,8 (5,8) 3,17 1,61 1,26 1,10 0,97 A
1504816 4,8 x 1,6 (8,0) 5,34 2,73 1,90 1,69 1,49 A
1504824 4,8 x 2,4 (9,6) 9,96 5,08 3,57 3,28 3,00 A
1504832 4,8 x 3,2 (11,2) 12,86 6,69 4,68 4,17 3,65 A
1506416 6,4 x 1,6 (9,6) 6,45 3,32 2,33 2,04 1,74 A
1506424 6,4 x 2,4 (11,2) 10,57 5,51 3,85 3,61 3,35 A
1506432 6,4 x 3,2 (12,8) 15,19 7,88 5,52 4,93 4,33 A
1508016 8,0 x 1,6 (11,1) 7,79 4,01 2,80 2,51 2,20 A
1508024 8,0 x 2,4 (12,7) 12,02 6,43 4,50 4,26 4,02 A
1509516 9,5 x 1,6 (12,7) 4,84 3,39 3,02 2,64 C
1509524 9,5 x 2,4 (14,3) 13,41 7,40 5,17 4,91 4,62 A
1509532 9,5 x 3,2 (15,9) 17,42 10,11 7,09 6,46 5,82 A
1512724 12,7 x 2,4 (17,5) 14,50 8,88 7,90 7,24 6,58 A
1512732 12,7 x 3,2 (19,0) 16,24 9,96 9,34 8,56 7,38 A
1515932 15,9 x 3,2 (22,2) 19,25 11,85 10,50 9,62 8,75 A
1515948 15,9 x 4,8 (25,4) 33,20 22,41 19,32 18,26 16,60 A
1519032 19,0 x 3,2 (25,4) 22,70 13,90 12,36 11,33 10,30 A
1519048 19,0 x 4,8 (28,6) 38,10 25,73 22,87 20,97 19,06 A
1525448 25,4 x 4,8 (35,0) 48,40 32,77 29,05 26,64 24,22 A
(*) Delivery time: A = in stock, B = about 1 week (from partner stock), C = new production, by agreement
On request
LEZ-SIL 60ISOPT Silicone tube Pharma|Med
Quality
Tolerance ISO DIN 3302.1 E2
Application
Coil length approx. 25 meters, wrapped in PE bags and sealed
Silicone; 55 +/-5 Shore A; transparent; peroxide-vulcanized; compliant: FDA §177.2600, BfR XV, biocompatible
according to USP Class VI, Ph.Eur. 3.1.9. (up to 2.5 mm wall thrickness), EC 1935/2004 ; high endurance when
used in peristaltic pumps; operating temperature -60 °C to +200 °C
Code n°Quantity in meters €/m
Particularly well suited for peristaltic pumps
pharmacy, medicine, biology, laboratory, food and beverage industries.
Other dimensions and colors on request
ultrapure Silicone; 60 +/-5 Shore A; transparent; platinum-vulcanized; free of peroxide; compliant: FDA §177.260,
BfR XV, biocompatible according to USP Class VI, Ph.Eur. 3.1.9, EC 1935/2004, manufactured in clean
room acc. to ISO 8; not cytotoxic; absolutely odourless and tasteless; autoclavable and erilisable ; operating
temperature -60 °C to +200 °C, peaks up to +250 °C.
bottle-fillingof pharmaceutical products, medical technology, dialysis, transfer of blood, artificial feeding, laboratory,
cell-preserving transfer of ferments (biology), peristaltic pumps
Vers. 20|05 Subject to prior sale Page 15
Part 1 Tubes
LEZ-SIL 60TPPT Silicone tube Pharma|Med
Quality
Tolerance ISO DIN 3302.1 E2
Application
Coil length 25 meters, wrapped in PE bags and hot-sealed
Dimensions Stock
Di x wall (Dex) 5 - 24 m >= 25 m >= 100 m >=250 m >= 500 m (*)
Metric dimensions
2600505 0,5 x 0,5 (1,5) 1,56 0,80 0,67 0,60 0,56 A2601010 1 x 1 (3) 1,00 0,49 0,40 0,37 0,34 A2602010 2 x 1 (4) 1,28 0,65 0,52 0,48 0,43 A2603010 3 x 1 (5) 1,50 0,73 0,63 0,59 0,54 A2603015 3 x 1,5 (6) 2,23 1,16 0,95 0,89 0,84 A2603020 3 x 2 (7) 2,73 1,59 1,27 1,20 1,13 A2604010 4 x 1 (6) 1,67 0,85 0,71 0,65 0,60 A2604015 4 x 1,5 (7) 2,56 1,37 1,13 1,04 0,96 A2604020 4 x 2 (8) 3,51 1,89 1,56 1,44 1,34 A2604030 4 x 3 (10) 5,56 3,11 2,58 2,37 2,22 A2604040 4 x 4 (12) 6,90 3,91 3,28 2,90 2,76 A2605015 5 x 1,5 (8) 2,73 1,43 1,26 1,16 1,10 A2605020 5 x 2 (9) 3,95 2,16 1,79 1,62 1,54 A2606015 6 x 1,5 (9) 3,23 1,71 1,44 1,29 1,20 A2606020 6 x 2 (10) 4,34 2,38 1,96 1,83 1,67 A2606030 6 x 3 (12) 7,45 4,09 3,29 3,00 2,72 A2607015 7 x 1,5 (10) 3,51 1,83 1,52 1,38 1,27 A2607020 7 x 2 (11) 4,67 2,55 2,13 1,93 1,77 A2607030 7 x 3 (13) 8,07 4,45 3,59 3,27 2,96 A2608020 8 x 2 (12) 5,23 2,87 2,33 2,11 1,95 A2608030 8 x 3 (14) 9,12 4,98 4,03 3,66 3,44 A2608040 8 x 4 (16) 12,13 7,20 5,88 5,34 4,85 A2610020 10 x 2 (14) 6,07 3,37 2,77 2,51 2,32 A2610025 10 x 2,5 (15) 8,90 4,98 4,03 3,66 3,44 A2610030 10 x 3 (16) 10,40 5,56 4,57 4,13 3,81 A2610050 10 x 5 (20) 17,97 10,25 8,42 7,68 7,26 C2612020 12 x 2 (16) 7,45 4,10 3,26 3,01 2,77 A2615030 15 x 3 (21) 13,35 7,44 6,06 5,57 5,12 A2618030 18 x 3 (24) 15,86 8,54 6,99 6,51 5,98 A2620020 20 x 2 (24) 9,28 4,95 4,05 3,77 3,46 A2620030 20 x 3 (26) 19,25 11,34 9,51 8,65 8,20 A2620050 20 x 5 (30) 15,36 12,57 11,71 10,75 C
British dimensions
2601608 1,6 x 0,8 (3,2) 1,50 0,78 0,64 0,58 0,53 A2601616 1,6 x 1,6 (4,8) 2,11 1,05 0,86 0,78 0,71 A2603216 3,2 x 1,6 (6,4) 2,73 1,44 1,18 1,08 0,98 A2604816 4,8 x 1,6 (8,0) 3,23 1,78 1,46 1,33 1,21 A2606416 6,4 x 1,6 (9,5) 3,84 2,17 1,78 1,62 1,47 A2606424 6,4 x 2,4 (11,1) 7,57 4,14 3,40 3,09 2,81 A2608016 8,0 x 1,6 (11,1) 4,79 2,68 2,20 2,00 1,82 A2609524 9,5 x 2,4 (14,3) 7,96 4,50 3,69 3,35 3,05 A2609532 9,5 x 3,2 (15,9) 10,85 6,12 5,02 4,56 4,15 A2612732 12,7 x 3,2 (19,0) 15,52 9,00 7,38 6,71 6,10 C2615932 15,9 x 3,2 (22,2) 21,70 12,49 10,23 9,30 8,46 A2619032 19,0 x 3,2 (25,4) 13,86 11,36 10,32 9,39 C2625448 25,4 x 4,8 (35,0) 26,98 22,12 20,11 18,28 C
(*) Delivery time: A = in stock, B = about 1 week (from partner stock), C = new production, by agreement
Other dimensions, hardnesses and colors on request
Code n°Quantity in meters €/m
ultrapure silicone; 60 +/-5 Shore A; transparent; platinum-vulcanized; without peroxide; compliant: FDA
§177.2600, BfR XV; biocompatible according to USP Class VI, EC 1935/2004 ; ISO DIN 10993 on request;
non-cytotoxic; absolutely odorless and tasteless; autoclavable and sterilisable; operating temperature: -60 °C to
200 °C, peaks up to 250 °C.
sterile bottle-filling of pharmaceutical products, medical technology, laboratory, biology, peristaltic pumps, cell-
preserving transfer of ferments (e.g. in dairies), food industries
Page 16 Subject to prior sale Vers. 20|05
Part 1 Tubes
LEZ-SIL 60PTF Silicone tube Food
Quality
Tolerance ISO DIN 3302.1 E2
Application
Coils length 25 meters, wrapped in PE bags and hot-sealed
Dimensions Stock
Di x wall (Dex) 5 - 24 m >= 25 m >= 100 m >=250 m >= 500 m (*)
Metric dimensions
1801010 PT 1 x 1 (3) 0,87 0,44 0,36 0,33 0,31 A
1801507 PT 1,5 x 0,75 (3) 0,87 0,44 0,36 0,33 0,31 A
1802010 PT 2 x 1 (4) 1,20 0,58 0,47 0,43 0,38 A
1803010 PT 3 x 1 (5) 1,26 0,66 0,57 0,53 0,48 A
1803015 PT 3 x 1,5 (6) 2,02 1,04 0,86 0,80 0,76 A
1804010 PT 4 x 1 (6) 1,47 0,77 0,64 0,58 0,54 A
1804015 PT 4 x 1,5 (7) 2,29 1,23 1,02 0,93 0,87 A
1804020 PT 4 x 2 (8) 3,28 1,70 1,41 1,30 1,21 A
1805015 PT 5 x 1,5 (8) 2,40 1,29 1,13 1,04 0,99 A
1805020 PT 5 x 2 (9) 3,66 1,94 1,62 1,46 1,38 A
1806015 PT 6 x 1,5 (9) 2,89 1,54 1,30 1,16 1,08 A
1806020 PT 6 x 2 (10) 3,99 2,14 1,77 1,65 1,51 A
1807015 PT 7 x 1,5 (10) 3,06 1,65 1,37 1,24 1,14 A
1807020 PT 7 x 2 (11) 4,15 2,30 1,92 1,73 1,60 A
1808015 PT 8 x 1,5 (11) 3,17 1,76 1,43 1,32 1,20 A
1808020 PT 8 x 2 (12) 4,70 2,58 2,10 1,90 1,76 A
1810020 PT 10 x 2 (14) 5,46 3,03 2,49 2,26 2,09 A
1810025 PT 10 x 2,5 (15) 8,03 4,48 3,63 3,30 3,10 A
1812020 PT 12 x 2 (16) 6,66 3,69 2,93 2,71 2,49 A
1815030 PT 15 x 3 (21) 11,55 6,70 5,46 5,02 4,61 A
1818030 PT 18 x 3 (24) 13,38 7,69 6,30 5,87 5,38 A
1820030 PT 20 x 3 (26) 17,63 10,22 8,57 7,79 7,38 A
British dimensions
1801608 PT 1,6 x 0,8 (3,2) 1,37 0,70 0,58 0,52 0,48 A
1801616 PT 1,6 x 1,6 (4,8) 1,80 0,95 0,78 0,71 0,64 A
1803216 PT 3,2 x 1,6 (6,4) 2,51 1,30 1,07 0,97 0,88 A
1804816 PT 4,8 x 1,6 (8,0) 3,06 1,61 1,32 1,20 1,09 A
1806416 PT 6,4 x 1,6 (9,5) 3,66 1,96 1,61 1,46 1,33 A
1806424 PT 6,4 x 2,4 (11,1) 6,83 3,73 3,06 2,78 2,53 A
1809524 PT 9,5 x 2,4 (14,3) 7,31 4,06 3,32 3,02 2,75 A
1809532 PT 9,5 x 3,2 (15,9) 9,72 5,51 4,52 4,11 3,74 A
1812732 PT 12,7 x 3,2 (19,0) 14,09 8,11 6,65 6,04 5,49 A
1815932 PT 15,9 x 3,2 (22,2) 20,04 11,25 9,22 8,38 7,62 A
1819032 PT 19,0 x 3,2 (25,4) 12,48 10,23 9,30 8,46 C
1825448 PT 25,4 x 4,8 (35,0) 24,31 19,92 18,12 16,47 C
(*) Delivery time : A = in stock, B = about 1 week (from partner stock), C = new production, by agreement
Code n°Quantity in meters €/m
Other dimensions or hardnesses on request
Silicone; 60 +/-5 Shore A; transparent; platinum-vulcanized; without peroxide; compliant: FDA §177.2600, BfR
XV, EC 1935/2004 ; not cytotoxic; absolutely odorless and tasteless; autoclavable and sterilisable; operating
temperature -60 °C to 200 °C, peaks up to 250 °C
bottle-filling of beverages, oenology and wine production, breweries, food industry, peristaltic pumps, cell-
preserving transfer of ferments (e.g. in dairies)
Vers. 20|05 Subject to prior sale Page 17
Part 1 Tubes
LEZ-SIL TPR Pressure silicone tube Pharma|Med
Quality
Tolerance ISO DIN 3302.1 S2
Test pressure according to DIN 20024 at 23 °C
Application
Coil length 25 m, minimum purchase: 5 m
Stock
5 - 24 m >=25 m >= 50 m >= 100 m (*)
1203015 3 x 1,5 / 1,5 (9) 11,18 6,32 5,68 5,04 60 A
1204015 4 x 1,5 / 1,5 (10) 11,80 6,99 6,28 5,57 60 A
1205015 5 x 1,5 / 1,5 (11) 12,35 7,77 7,02 6,28 40 A
1206015 6 x 1,5 / 1,5 (12) 12,96 8,17 7,38 6,59 35 A
1208020 8 x 2 / 1,5 (15) 16,36 10,43 9,46 8,48 25 A
1210020 10 x 2 / 1,5 (17) 18,92 12,16 11,03 9,90 25 A
1212520 12,5 x 2 / 1,5 (19,5) 21,53 14,52 13,11 11,70 25 A
1214025 14 x 2,5 / 1,5 (22) 31,21 20,88 18,88 16,87 22 A
1216030 16 x 3 / 2 (26) 39,00 26,53 23,98 21,44 22 A
1219035 19 x 3,5 / 2,0 (30) 45,57 32,59 29,48 26,37 20 A
1225040 25 x 4 / 2 (37) 61,15 43,96 39,72 35,48 15 A
LEZ-SITEC RTPR Pressure silicone tube Technology
Quality
Tolerances ISO DIN 3302.1 E3
Test pressure according to DIN 20024 at 20 °C.
Application
Coil length Production lengths of approx. 10 to 25 m; minimum purchase: 5 m
Stock
5 - 24 m >=25 m >= 50 m >= 100 m (*)
6603025 3 x 2,5 (8) 6,75 4,45 4,18 3,90 82 A
6604025 4 x 2,5 (9) 6,99 4,54 4,26 3,97 69 A
6605030 5 x 3 (11) 10,30 6,68 6,26 5,85 57 A
6606030 6 x 3 (12) 11,56 7,61 7,13 6,66 56 A
6607032 7 x 3,25 (13,5) 12,14 8,00 7,50 7,00 55 A
6608032 8 x 3,25 (14,5) 12,36 8,14 7,63 7,12 49 A
6609035 9 x 3,5 (16) 13,22 8,71 8,17 7,62 47 A
6610035 10 x 3,5 (17) 14,43 9,42 8,83 8,24 44 A
6611035 11 x 3,5 (18) 14,88 9,70 9,10 8,49 42 A
6612035 12 x 3,5 (19) 15,28 9,92 9,30 8,68 39 A
6613035 13 x 3,5 (20) 15,97 10,43 9,78 9,13 38 A
6615040 15 x 4 (23) 20,67 14,13 13,25 12,37 36 A
6616040 16 x 4 (24) 21,01 14,33 13,44 12,54 35 A
6618040 18 x 4 (26) 22,15 15,50 14,53 13,56 33 A
6619045 19 x 4,5 (28) 22,84 15,77 14,78 13,80 32 A
6620050 20 x 5 (30) 24,04 16,82 15,77 14,72 31 A
(*) Delivery time: A = in stock, B = about 1 week (from partner stock), C = new production, by agreement
(**) Operating pressure can be obtained by dividing the burst pressure by 3
Other sizes on request
Silicone with glassfabric insert; 70/60 +/-5 Shore A; translucent; compliant: FDA §177.2600, BfR XV, USP Class
VI (fabric insert), EC 1935/2004 ; operating temperature -60 °C to +200 °C, up to +250 °C in hot air
pharmacy, medicine, chemistry, mechanical engineering and equipment manufacturing
Silicone; 70 +/-5 Shore A; inner: transparent, outer: coated with red silicone; braided with monofilament;operating
temperature -60 °C to +180 °C
hydraulic components, chemistry, mechanical engineering and equipment manufacturing
Dimensions
Dixcore/cover (Dext)
Burst
pressure in
bar (**)
Burst
pressure in
bar (**)
Dimensions
Dixcore/cover (Dext)
Code n°Quantity in meters €/m
Code n°Quantity in meters €/m
Page 18 Subject to prior sale Vers. 20|05
Part 1 Tubes
LEZ-SIL FTPR Pressure silicone tube Food
Quality
Tolerance ISO DIN 3302.1 E2 / DIN 40628
Test pressure according to DIN 20024
Application
Coil length
Stock
5 - 24 m >=25 m >= 50 m >= 100 m (*)
1203025 F 3 x 2,5 (8) 8,35 5,23 4,79 4,33 > 50 B
1204025 F 4 x 2,5 (9) 8,95 5,59 5,10 4,63 > 50 A
1205030 F 5 x 3 (11) 10,97 6,99 6,43 5,87 > 35 B
1206030 F 6 x 3 (12) 12,12 7,64 7,02 6,41 > 30 A
1207032 F 7 x 3,2 (13,4) 13,38 8,78 8,23 7,67 30 A
1208032 F 8 x 3,2 (14,4) 13,98 9,00 8,28 7,56 25 A
1209035 F 9 x 3,5 (16) 15,45 9,56 8,95 8,36 25 A
1210040 F 10 x 4 (18) 17,25 10,46 9,62 8,78 25 A
1212040 F 12 x 4 (20) 19,93 13,07 12,24 11,43 24 B
1213040 F 13 x 4 (21) 21,13 13,73 12,88 12,01 23 A
1214045 F 14 x 4,5 (23) 22,99 15,57 14,26 12,93 23 A
1216050 F 16 x 5 (26) 26,70 19,85 18,24 16,49 22 A
1219055 F 19 x 5,5 (30) 33,25 23,51 21,52 19,53 20 A
1220055 F 20 x 5,5 (31) 35,71 25,37 23,23 21,06 15 B
1222060 F 22 x 6 (34) 39,74 29,60 27,09 24,57 15 A
1225060 F 25 x 6 (37) 45,92 34,65 31,71 29,61 15 A
LEZ-SILEXP 15 Silicone foam tube Lab|Technology|Insulation
Quality
Tolerance ISO DIN 3302.1 E3
Application
Coil length
Dimensions Stock
Dixcore/cover (Dext) 5 - 19 m >= 20 m >= 60 m >= 100 m >= 200 m (*)
2508040 8 x 4 (16) 11,25 7,81 6,46 6,15 5,97 A
2508080 8 x 8 (24) 12,59 8,71 7,36 7,01 6,80 A
2512080 12 x 8 (28) 16,62 12,02 10,52 10,02 9,72 A
2515075 15 x 7,5 (30) 17,49 13,71 11,15 10,62 10,41 A
2515100 15 x 10 (35) 21,92 15,77 13,52 12,88 12,49 A
2520100 20 x 10 (40) 25,19 19,53 17,28 16,45 15,96 A
2522100 22 x 10 (42) 27,28 21,03 18,78 17,89 17,35 A
2525100 25 x 10 (45) 30,49 24,04 21,03 20,03 19,43 A
2528100 28 x 10 (48) 33,06 26,29 23,29 22,18 21,51 A
2530100 30 x 10 (50) 34,98 27,79 24,79 23,61 22,90 A
2540100 40 x 10 (60) 46,64 36,15 32,23 30,70 29,78 A
(*) Delivery time : A = in stock, B = about 1 week (from partner stock), C = new production, by agreement
(**) Operating pressure can be obtained by dividing the burst pressure by 3
Silicone foam profiles: see page 38
Dimensions
Dixcore/cover (Dext)
burst pressure
in bar (**)Code n°
Quantity in meters €/m
Code n°Quantity in meters €/m
Silicone with glassfibre insert; 70 +/-5 Shore A; transparent; compliant: FDA §177.2600, BfR XV, EC 1935/2004,
UL94 HB; operating temperature -60 °C to +200 °C
bottle-filling of beverages, food and cosmetics, oenology and wine production, breweries and dairies, mechanical
engineering and equipment manufacturing for the food industry
Silicone 60 +/-5 Shore 00 (15 +/-5 Shore A); density about 0.25; redbrick; fine-pored closed cells with internal and
external skin; good elongation ability and good restoring force; operating temperature -50 °C to +200 °C
heat insulation for heating facilities, laboratory, chemistry and electrical engineering
Other dimensions, hardnesses and qualities on request (e.g. FDA-compliant for food contact)
up to 12x8 mm: 20 m; 15x10 mm: 15 m; up 20x10 mm to 30x10 mm: 10 m
minimum purchase= 5 m
Production lengths of approx. 10 to 25 m; minimum purchase: 5 m
Vers. 20|05 Subject to prior sale Page 19
Part 1 Tubes
LEZ-PET Polyethylene tube Lab|Chemistry|Technology|Pneumatics
Quality
Tolerances +/-0,1 mm up to 10x1 mm; +/-0,15 to 14x2 mm
Application
Coil length 100 m
Dimensions Stock
Di x wall (Dex) >=100 m >= 500 m >= 1000 m (*)
8002010 2 x 1 (4) 0,63 0,32 0,29 24 20 A
8003010 3 x 1 (5) 0,68 0,35 0,32 18 25 A
8004010 4 x 1 (6) 0,74 0,42 0,37 14 30 A
8006010 6 x 1 (8) 0,84 0,56 0,50 10 40 A
8008010 8 x 1 (10) 0,95 0,68 0,61 8 40 A
8010010 10 x 1 (12) 0,99 0,70 0,63 6 60 A
8012020 12 x 2 (16) 2,63 1,99 1,77 10 90 B
8014020 14 x 2 (18) 2,89 2,16 1,93 9 120 B
LEZ-PAM Polyamide tube Lab|Chemistry|Technology|Pneumatics
Quality
Tolerances +/-0,05 mm to 3x1 mm; +/-0,1 mm to 10x1 mm; +/-0,15 mm to 14x2 mm
Application
Coils length 100 m
Dimensions Stock
Di x wall (Dex) >=100 m >= 500 m >= 1000 m (*)
8102010 2 x 1 (4) 1,16 0,90 0,81 44 20 B
8103010 3 x 1 (5) 1,52 1,18 1,06 33 25 B
8104010 4 x 1 (6) 1,89 1,43 1,27 26 25 B
8106010 6 x 1 (8) 2,52 1,91 1,70 19 30 B
8108010 8 x 1 (10) 3,31 2,49 2,22 14 60 B
8110010 10 x 1 (12) 4,10 3,16 2,82 12 85 B
8112020 12 x 2 (16) 9,46 7,22 6,44 19 90 B
8114020 14 x 2 (18) 10,51 8,15 7,27 16 120 B
LEZ-GAS Butyl tube Lab|Technology
Quality
Tolerance ISO DIN 3302.1 E2
Application gas tubes for laboratory, chemistry and apparatus engineering
Coil length 25 m
Dimensions Stock
Di x wall (Dex) 5 - 24m >= 25 m >=100 m >=500 m >=1000 m (*)
2306030 6 x 3 (12) 11,03 6,39 5,11 4,28 3,96 A
2308020 8 x2 (12) 10,26 5,87 4,73 4,02 3,70 A
2310025 10 x 2,5 (15) 14,79 8,94 7,28 6,13 5,68 B
(*) Delivery time: A = in stock, B = about 1 week (from partner stock), C = new production, by agreement
Quantity in meters € m
Other dimensions on request
Code n°
Butyl; 60 +/-5 Shore A; white; density=1,4; excellent gas impermeability; good resistance against, alcohols,
aldehydes, glycols, ketones, bases, hypochlorites, silicone oil, vegetable oils, fats and steam; operating temperature -
40 °C to +80 °C, peaks up to +120 °C
Polyethylene; 45 +/-5 Shore D; natural; compliant: BGA III, FDA 21 CFR 177.1520 c 2.2; physiologically harmless;
good chemical resistance and good dielectricproperties, sterilisable with ethylene-oxideand Gamma-rays; operating
temperature -30 °C to +70 °C
Code n°
Code n°
Bending radius
mm
Max. WP bar
at 23 °C
Max. WP bar
at 23 °C
Bending radius
mm
Polyamide 11/12 w; 63 Shore D; natural; good pressure and impact resistance; insensitive to water and good
chemical resistance against oils, fats and fuels, varnishes, paints, solvents and hydraulic fluids; high abrasion
resistance; good resistance against UV and light; operating temperature -40 °C to +90 °C
laboratory, chemistry, mechanical engineering and equipment manufacturing, fuels, tubes for grease lubrication,
hydraulics, pneumatics, air pressure tubing, vacuum
laboratory, chemistry, mechanical engineering, equipment manufacturing, pneumatics, air pressure tubing
Quantity in meters €/m
Quantity in meters €/m
Page 20 Subject to prior sale Vers. 20|05
Part 1 Tubes
LEZ-FLUTEC 75 Fluoroelastomer tube Lab|Technology
Quality
Tolerance ISO DIN 3302.1 E2
Application
Coil length approx. 25 m; minimum purchase= 5 m
Dimensions Stock
Di x wall (Dex) 5 to 24 m >= 25 m >= 50 m >= 100 m >= 200 m (*)
6101010 1 x 1 (3) 3,41 2,26 1,99 1,81 1,70 A
6102010 2 x 1 (4) 4,10 2,72 2,40 2,18 2,04 A
6103010 3 x 1 (5) 4,89 3,45 3,05 2,76 2,59 A
6103015 3 x 1,5 (6) 7,41 5,28 4,65 4,22 3,96 A
6104010 4 x 1 (6) 5,67 4,20 3,69 3,30 3,07 A
6104015 4 x 1,5 (7) 7,93 6,20 5,47 4,96 4,65 A
6104020 4 x 2 (8) 10,19 7,60 6,71 6,08 5,70 A
6105010 5 x 1 (7) 5,88 4,09 3,61 3,27 3,07 A
6105015 5 x 1,5 (8) 8,77 6,30 5,56 5,04 4,72 A
6105020 5 x 2 (9) 13,18 9,72 8,58 7,78 7,29 A
6106015 6 x 1,5 (9) 10,19 7,54 6,65 6,03 5,65 A
6106020 6 x 2 (10) 14,66 10,72 9,46 8,57 8,04 A
6107015 7 x 1,5 (10) 11,61 8,60 7,59 6,88 6,45 A
6107020 7 x 2 (11) 16,02 12,04 10,63 9,64 9,03 A
6108015 8 x 1,5 (11) 13,18 9,55 8,42 7,64 7,16 A
6108020 8 x 2 (12) 18,23 13,39 11,82 10,71 10,04 A
6109020 9 x 2 (13) 20,49 15,23 13,44 12,18 11,42 A
6110020 10 x 2 (14) 21,85 16,62 14,66 13,29 12,46 A
6112020 12 x 2 (16) 24,53 18,74 16,54 14,99 14,06 A
6112025 12 x 2,5 (17) 33,41 24,27 21,41 19,41 18,20 A
6115030 15 x 3 (21) 47,07 36,13 31,88 28,91 27,10 A
6118030 18 x 3 (24) 50,48 38,70 34,14 30,96 29,02 A
6120035 20 x 3,5 (27) 70,23 54,43 48,03 43,54 40,82 A
LEZ-VITCHEM 70GF Viton® tube Quality
Tolerance ISO DIN 3302.1 E2
Application
Coil length to 4x1 mm: approx. 50 m; to 12x2,5 mm: approx. 25 m; 15x3 mm: approx. 15 m; minimum purchase= 5 m
Dimensions Stock
Di x wall (Dex) 5 to 24 m >= 25 m >= 50 m >= 100 m >= 200 m (*)
6302010 GF 2 x 1 (4) 5,78 4,00 3,60 3,36 3,26 A6303010 GF 3 x 1 (5) 6,21 4,39 4,08 3,80 3,69 A6304010 GF 4 x 1 (6) 7,27 5,18 4,69 4,26 4,14 A6305015 GF 5 x 1,5 (8) 10,76 7,63 7,09 6,63 6,43 A6306020 GF 6 x 2 (10) 17,50 12,51 11,62 10,87 10,54 A6308020 GF 8 x 2 (12) 21,64 15,66 14,53 13,56 13,15 A6310020 GF 10 x 2 (14) 25,62 18,77 17,42 16,27 15,78 A6312020 GF 12 x 2 (16) 30,66 23,70 21,92 20,41 19,80 A6312025 GF 12 x 2,5 (17) 40,05 29,93 27,61 25,59 24,82 A
ab 5 m ab 15 m ab 30 m ab 60 m ab 120 m
6315030 GF 15 x 3 (21) 57,71 42,24 39,21 36,60 35,51 A
(*) Delivery time :A = in stock, B = about 1 week (from partner stock), C = new production, by agreement
(**) Trademark of Dupont Performance Elastomers
Other dimensions on request
laboratory, chemistry, petrochemistry, mechanical engineering, oil and fuel lines, hydraulics, manufacture of
reservoirs, tanks and containers, fuel line for automobile-, ship- and aviation industry, pharmaceutical-, cosmetics-
and food prodcution, paste-like and oleaginous liquids
Fluoroelastomer; 75 +/-5 Shore A; black; for technical purposes; resistant against diluted acids and bases, aliphatic,
aromatic and halogen-substituted hydrocarbons, against fuels, oils and hydraulic fluids; operating temperature -15 °C
to +200 °C, peaks up to 250 °C
laboratory, chemistry, mechanical engineering and equipment manufacturing, oil and fuel lines
100 % Fluoroelastomer made of a special Viton®type (**) with high fluorine-content; 70 +/-5 Shore A; black;
compliant: FDA §177.2600, 2002/95/EC, 2011/65/EC, UL94V0; very good resistance against aliphatic,
aromatic and halogen substituted hydrocarbons, gasoline, biodiesel, oils, glycols, cooling agents and
hydraulic fluids; particularly_impermeable_to_gas; operating temperature -8 °C to +200 °C, peaks to
Particularly resistant against methanol, biodiesel and steam
Code n°Quantity in meters €/m
Code n°Quantity in meters €/m
Lab|Petrochemistry
Pharma|Cosm|Food
Vers.20|05 Subject to prior sale Page 21
Part 1 Tubes
LEZ-VIT 70 Viton® tube Lab|Chemistry|Technology
Quality
Tolerance ISO DIN 3302.1 E2
Application
laboratory, chemistry, mechanical engineering, equipment manufacturing, gas and oil lines, hydraulics
Coil length up to 4x1 mm: approx. 50 m; up to 12x2,5 mm: approx. 25 m; from 15x3 mm and over: approx. 10 m
minimum purchase= 5 m up to 12x2,5 mm; 1 m from 15x3 mm and over
Dimensions Stock
Di x wall (Dex) 5 to 24 m >= 25 m >= 50 m >= 100 m (*)
1301010 1 x 1 (3) 3,93 2,65 2,46 2,31 A1301507 1,5 x 0,75 (3) 4,56 3,35 3,04 2,76 A1301515 1,5 x 1,5 (4,5) 8,65 6,79 6,20 5,68 A1302007 2 x 0,75 (3,5) 4,93 3,44 3,19 2,97 A1302010 2 x 1 (4) 5,30 3,67 3,30 3,09 A1302015 2 x 1,5 (5) 8,01 5,81 5,28 4,79 A1302507 2,5 x 0,75 (4) 5,73 4,04 3,67 3,34 A1302510 2,5 x 1 (4,5) 6,52 4,39 4,01 3,68 A1303010 3 x 1 (5) 5,73 4,02 3,74 3,49 A1303015 3 x 1,5 (6) 8,12 5,83 5,41 5,04 A1303020 3 x 2 (7) 11,25 8,12 7,50 6,97 A1304010 4 x 1 (6) 6,68 4,75 4,30 3,91 A1304015 4 x 1,5 (7) 8,49 6,14 5,70 5,32 A1304020 4 x 2 (8) 12,04 8,62 8,00 7,46 A1305010 5 x 1 (7) 6,21 4,48 4,15 3,87 A1305015 5 x 1,5 (8) 9,87 7,00 6,50 6,08 A1305020 5 x 2 (9) 13,74 9,77 9,07 8,48 A1305025 5 x 2,5 (10) 16,92 12,42 11,59 11,01 A1305030 5 x 3 (11) 20,11 15,08 14,10 13,54 A1306010 6 x 1 (8) 7,37 5,04 4,68 4,37 A1306015 6 x 1,5 (9) 11,46 8,08 7,50 7,01 A1306020 6 x 2 (10) 16,02 11,48 10,66 9,97 A1306030 6 x 3 (12) 26,95 19,37 17,99 16,81 A1307010 7 x 1 (9) 8,75 6,33 5,90 5,53 A1307015 7 x 1,5 (10) 12,89 9,16 8,50 7,93 A1307020 7 x 2 (11) 18,09 12,94 12,00 11,20 A1308010 8 x 1 (10) 10,24 7,29 6,77 6,31 A1308015 8 x 1,5 (11) 14,37 10,24 9,50 8,87 A1308020 8 x 2 (12) 19,84 14,37 13,33 12,44 A1308030 8 x 3 (14) 32,68 23,63 21,95 20,51 A1309015 9 x 1,5 (12) 16,65 11,95 10,82 9,81 A1309020 9 x 2 (13) 22,70 15,79 14,65 13,68 A1310010 10 x 1 (12) 12,89 9,17 8,48 7,88 A1310020 10 x 2 (14) 23,50 17,23 15,99 14,93 A1312020 12 x 2 (16) 28,11 21,74 20,12 18,72 A1312025 12 x 2,5 (17) 36,70 27,45 25,33 23,47 A
1 to 9 m >= 10 m >= 20 m >= 40 m
1315030 15 x 3 (21) 52,78 38,76 35,97 33,59 A
1318030 18 x 3 (24) 71,13 53,68 43,96 39,18 A
1320035 20 x 3,5 (27) 94,05 68,44 57,22 51,14 A
1322035 22 x 3,5 (29) 101,00 74,21 62,08 55,48 A
1325035 25 x 3,5 (32) 109,01 83,20 71,17 64,27 A
1327050 27 x 5 (37) 172,13 132,98 113,62 102,49 A
1330040 30 x4 (38) 152,61 116,74 97,69 87,63 A
1330050 30 x 5 (40) 192,77 146,27 124,90 112,64 A
1340050 40 x 5 (50) 243,21 186,52 159,90 144,21 A
(*) Delivery time: A = in stock, B = about 1 week (from partner stock), C = new production, by agreement(**) Trademark of Dupont Performance Elastomers
Other dimensions, hardnesses and colors on request
100 % Viton® (**); 70 +/-5 Shore A; black; density= 1.85; resistant against aliphatic, aromatic and halogen-
substituted hydrocarbons, acids, gasoline, diesel fuel, oils, glycols and hydraulic liquids; not suitable with
methanol, ketones, aldehydes, esters, ethers; particularly_impermeable_to_gas; operating temperature -15
°C to +200 °C; peaks up to +300 °C
Recommendable for gas analyzers
Code n°Quantity in meters €/m
Non-flammable (UL94-V0) or FDA-compliant (food contact) on request
Page 22 Subject to prior sale Vers. 20|05
Part 1 Tubes
LEZ-VITEC 60 Viton® tube Lab|Chemistry|Technology
for peristaltic pumps
Quality
Tolerance ISO DIN 3302.1 E2
Application laboratory, chemistry, mechanical engineering and equipment manufacturing, oil lines
Coil length approx. 25 m
Dimensions Stock
Di x wall (Dex) 5 to 24 m >= 25 m >= 50 m >= 100 m (*)
Metric dimensions
1702010 2 x 1 (4) 6,05 4,25 3,82 3,44 A1703010 3 x 1 (5) 6,90 4,83 4,34 3,91 A1704010 4 x 1 (6) 8,59 6,00 5,40 4,86 A1704020 4 x 2 (8) 15,17 10,62 9,56 8,60 A1705010 5 x 1 (7) 9,39 6,60 5,94 5,34 A1705015 5 x 1,5 (8) 13,31 9,28 8,35 7,52 A1706015 6 x 1,5 (9) 15,28 10,70 9,63 8,66 A1706020 6 x 2 (10) 21,54 15,07 13,56 12,20 A1708020 8 x 2 (12) 26,84 18,77 16,89 15,21 A1710020 10 x 2 (14) 31,40 22,00 19,80 17,82 A1712020 12 x 2 (16) 35,65 25,01 22,51 20,26 A
British dimensions
1700810 0,8 x 1,0 (2,8) 3,93 2,71 2,44 2,20 A1700816 0,8 x 1,6 (4,0) 5,36 3,68 3,32 2,99 A1701608 1,6 x 0,8 (3,2) 4,34 3,01 2,71 2,44 A1701616 1,6 x 1,6 (4,8) 5,94 4,14 3,73 3,36 A1703216 3,2 x 1,6 (6,4) 8,59 5,95 5,36 4,82 A1704016 4,0 x 1,6 (7,2) 9,97 6,93 6,24 5,61 A1704816 4,8 x 1,6 (8,0) 11,46 8,02 7,21 6,49 A1704824 4,8 x 2,4 (9,6) 22,97 16,12 14,51 13,06 A1706416 6,4 x 1,6 (9,6) 14,22 9,94 8,95 8,05 A1706424 6,4 x 2,4 (11,2) 23,61 16,57 14,92 13,42 A1706432 6,4 x 3,2 (12,7) 33,05 23,12 20,81 18,73 A1708016 8,0 x 1,6 (11,2) 17,08 11,98 10,78 9,70 A1708024 8,0 x 2,4 (12,7) 27,32 19,08 17,18 15,46 A1709524 9,5 x 2,4 (14,3) 31,19 21,85 19,66 17,69 A1709532 9,5 x 3,2 (15,9) 41,53 29,08 26,17 23,55 A1712724 12,7 x 2,4 (17,5) 36,60 25,58 23,02 20,72 A1712732 12,7 x 3,2 (19,0) 51,61 36,16 32,54 29,29 A
LEZ-VIT PP55 Viton® tube Lab|Chemistry
Precision tube for extremely precise dosage
Quality
Tolerance inner diameter ISO DIN 3302.1 E1
Application
Laboratory, chemistry, mechanical engineering and equipment manufacturing, oil and fuel lines
Coil length 1,5 m
Dimensions Stock
Di x wall (Dex) 5 to 24 pieces >= 25 pieces >= 50 pieces >= 100 pieces (*)
Metric dimensions
2703010 3 x 1 (5) 14,91 10,87 9,05 8,15 ABritish dimensions
2700816 0,8 x 1,6 (4,0) 14,59 10,62 8,85 7,96 A2701616 1,6 x 1,6 (4,8) 19,94 14,54 12,12 10,91 A2703216 3,2 x 1,6 (6,4) 30,98 22,65 18,88 16,99 A2704016 4,0 x 1,6 (7,2) 37,13 27,07 22,56 20,30 A2704816 4,8 x 1,6 (8,0) 43,23 31,50 26,25 23,62 A2706416 6,4 x 1,6 (9,5) 47,95 34,94 29,11 26,20 A2706424 6,4 x 2,4 (11,1) 46,83 39,03 35,12 C2709524 9,5 x 2,4 (14,3) 80,31 58,46 48,72 43,85 C2712732 12,7 x 3,2 (19,0) 83,14 70,96 67,37 C2715932 15,9 x 3,2 (22,3) 99,81 85,15 80,89 C
(*) Delivery time : A = in stock, B = about 1 week (from partner stock), C = new production, by agreement
(**) Trademark from Dupont Performance Elastomers
Other dimensions on request
Fluoroelastomer; 64 +/-5 Shore A; black; resistant against aliphatic, aromatic and halogen-substituted hydrocarbons,
fuels, oils, greases, glycols and hydraulic fluids, diluted acids and bases; operating temperature -35 °C to +200 °C,
peaks up to 250 °C
Code n°
Code n°Quantity in meters €/m
Quantity in meters €/m
Fluoroelastomer made of 100% genuine Viton® (**); 55 +/- 5 Shore A; vulcanisation on rod; black; identical
properties to LEZ-VITEC 60 (see above)
Particularly suitable for peristaltic pumps
Vers. 20|05 Subject to prior sale Page 23
Part 1 Tubes
LEZ-VITMET 70/ES Viton® pressure tube Hydraulics|Pressure
with stainless steel braiding
Quality
Tolerance inner tube: according to ISO DIN 3302.1 E2
Application
Coil length approx. 25 m; minimum purchase= 5m
Dimensions Stock
DN 5 to 24 m >= 25 m >= 100 m >= 200 m (*)
6006015 E DN 6 20,73 14,48 13,03 12,38 A
6008020 E DN 8 26,89 18,81 16,93 16,08 A
6010020 E DN 10 30,58 21,40 19,26 18,30 A
6012020 E DN 12 34,76 24,35 21,91 20,82 A
6015030 E DN 15 MQ=25 mm 43,25 38,92 36,98 C
6018030 E DN 18 MQ=25 mm 50,31 45,28 43,02 C
6020035 E DN 20 MQ=25 mm 55,22 49,70 47,22 C
LEZ-VITGLAS 70 Viton® pressure tube Hydraulics|Pressure
with glass fabric braiding
Quality
Tolerance inner tube: according to ISO DIN 3302.1 E2
Application laboratory, chemistry, mechanical engineering and equipment manufacturing, oil and fuels lines,
pneumatics, hydraulic and pressure tubes
Coil length approx. 25 m; minimum purchase= 5 m
Dimensions Stock
DN 5 to 24 m >= 25 m >= 100 m >= 200 m (*)
6006015 G DN 6 19,01 13,32 11,99 11,39 A
6008020 G DN 8 24,69 17,30 15,57 14,79 A
6010020 G DN 10 28,18 19,69 17,72 16,83 A
6012020 G DN 12 31,98 22,40 20,16 19,15 A
6015030 G DN 15 MQ=25 m 39,79 35,81 34,02 C
6018030 G DN 18 MQ=25 m 46,29 41,66 39,58 C
6020035 G DN 20 MQ=25 m 50,81 45,73 43,44 C
(*) Delivery time: A = in stock, B = about 1 week (from partner stock), C = new production, by agreement
(**) Trademarke from Dupont Performance Elastomers
Fluoroelastomer tubes braided with stainless steel; inner tube made of Viton®(**); 70 +/-5 Shore A; black; braid: Niro-
wire 1.4301 soft 0,24 mm; good resistance against aliphatic, aromatic and halogen-substituted hydrocarbons, fuels,
acids, alcohols, glycols and hydraulic fluids; not suitable with methanol, ketones, aldehydes, esters, ethers;
operating temperature -15 °C to +200 °C, peaks up to +300 °C; operating pressure: max. 10 bar
Excellent gas impermeability!
laboratory, chemistry, mechanical engineering and equipment manufacturing, oil and fuel lines, pneumatics,
hydraulic and pressure tubing
Pressure test for higher pressure on request
Multilayer braiding on request
Fluoroelastomer tubes braided with fiberglass; inner tube made of Viton®(**); 70 +/-5 Shore A; black; braid:
fibreglass thread 68x3, about 0,3 mm thick; resistant against aliphatic, aromatic and halogen-substituted
hydrocarbons, fuels, acids, alcohols, glycols, oils and hydraulic fluids; not suitable with methanol, ketones,
aldehydes, esters, ethers ; operating temperature -15 °C to +200 °C, peaks up to +300 °C; operating pressure: max.
10 bar
Excellent gas impermeability!
Other dimensions on request
Code n°Quantity in meters €/m
Code n°Quantity in meters €/m
Page 24 Subject to prior sale Vers. 20|05
Part 1 Tubes
LEZ-FLON PTFE tube Lab|Chem|Med
Quality
Tolerance ISO DIN 3302.1 E2
Application laboratory, chemistry, medicine, pharmacy, filling technology, mechanical engineering, insulation
production lengths (approx. 10 to 25 m); minimum purchase: 5 m
Dimensions Stock
in mm 5 - 24 m >= 25 m >= 100 m >= 200 m (*)
1601005 1 x 0,5 (2) 2,49 1,61 1,21 1,11 10 - A
1601010 1 x 1 (3) 3,30 2,17 1,73 1,56 15 280 A
1602005 2 x 0,5 (3) 2,92 1,70 1,36 1,22 20 - A
1602010 2 x 1 (4) 3,62 2,32 1,87 1,68 18 140 A
1603005 3 x 0,5 (4) 3,19 1,91 1,50 1,35 35 - A
1603010 3 x 1 (5) 4,87 3,23 2,57 2,32 25 93 A
1604005 4 x 0,5 (5) 3,62 2,27 1,78 1,59 50 - A
1604010 4 x 1 (6) 5,30 3,36 2,64 2,38 35 70 A
1605005 5 x 0,5 (6) 3,95 2,45 1,93 1,74 70 - A
1605010 5 x 1 (7) 7,19 4,47 3,51 3,16 50 56 A
1605015 5 x 1,5 (8) 11,36 7,21 5,67 5,16 45 - A
1606005 6 x 0,5 (7) 5,19 3,08 2,42 2,22 100 - A
1606010 6 x 1 (8) 7,73 4,74 3,72 3,35 65 46 A
1606015 6 x 1,5 (9) 11,90 7,52 5,93 5,41 60 - A
1607010 7 x 1 (9) 9,68 6,17 4,84 4,38 80 40 A
1608010 8 x 1 (10) 10,22 6,48 5,16 4,64 100 35 A
1608015 8 x 1,5 (11) 15,68 10,31 8,12 7,35 85 - A
1610010 10 x 1 (12) 12,49 8,20 6,59 5,93 145 28 A
1610015 10 x 1,5 (13) 18,93 13,09 10,31 9,28 120 - A
1612010 12 x 1 (14) 13,25 9,98 7,85 7,00 200 23 A
1612015 12 x 1,5 (15) 20,01 15,47 12,18 10,96 160 - A
1614010 14 x 1 (16) 15,84 11,74 9,24 8,20 260 20 A
1616010 16 x 1 (18) 17,63 13,54 10,48 9,41 330 17 A
LEZ-FLON FEP tube Lab|Chem|Med
Quality
Tolerance ISO DIN 3302.1 E2
Application laboratory, chemistry, medicine, pharmacy, filling technology, mechanical engineering, insulation
approx. 50 m; minimum purchase: 10 m
Dimensions Stock
in mm 10-49 m >= 50 m >= 100 m >= 200 m (*)
1601010 FEP 1 x 1 (3) 4,70 3,13 2,66 2,31 20 224 A
1602010 FEP 2 x 1 (4) 5,25 3,50 2,99 2,60 20 112 A
1603010 FEP 3 x 1 (5) 5,89 3,95 3,35 2,92 28 74 A
1604010 FEP 4 x 1 (6) 6,54 4,38 3,73 3,24 37 56 A
1606010 FEP 6 x 1 (8) 8,33 5,64 4,80 4,17 68 37 A
1608010 FEP 8 x 1 (10) 11,09 7,46 6,35 5,52 105 28 B
1610010 FEP 10 x 1 (12) 13,57 9,23 7,87 6,84 150 22 B
(*) Delivery time: A = in stock, B = about 1 week (from partner stock), C = new production, by agreement
PTFE is a fluoroplastic; 55 +/-5 Shore D; natural; density= 2,15; compliant: FDA 21 CFR 177.1550, UL94V0 ;
excellent chemical resistance; no water absorption; good resistance to pressure; excellent sliding and nonstick
properties; very good electric and dielectric properties; operating temperature -200 °C to +260 °C
Other dimensions and corrugated tubes on request
Code n°Quantity in meters €/m
Coil length
Coil length
Bending
radius/ mm
Burst
pressure/bar
FEP is a fluoroplastic-copolymer; 60 +/-5 Shore D; translucent; density= 2,15; compliant: UL94V0; physical and
chemical resistance like PTFE; operating temperature -200 °C to +200 °C
Code n° Bending
radius/ mm
Burst
pressure/bar
Quantity in meters €/m
Vers. 20|05 Subject to prior sale Page 25
Part 1 Tubes
LEZ-FLON PFA tube Lab|Chem|Med
Quality
Tolerance ISO DIN 3302.1 E2
Application laboratory, chemistry, medicine, pharmacy, filling technology, mechanical engineering, insulation
Coil length approx. 50 m; minimum purchase: 10 m
Dimensions Stock
in mm 10-49 m >= 50 m >= 100 m >= 200 m (*)
1601005 PFA 1 x 0,5 (2) 4,81 3,18 2,70 2,36 10 - A
1601010 PFA 1 x 1 (3) 5,14 3,40 2,89 2,51 18 140 A
1602005 PFA 2 x 0,5 (3) 5,14 3,40 2,89 2,51 20 - A
1602010 PFA 2 x 1 (4) 5,73 3,79 3,23 2,81 35 140 A
1603005 PFA 3 x 0,5 (4) 5,46 3,61 3,07 2,67 25 - A
1603010 PFA 3 x 1 (5) 6,49 4,51 3,84 3,34 25 140 A
1604005 PFA 4 x 0,5 (5) 5,79 3,83 3,26 2,83 50 - A
1604010 PFA 4 x 1 (6) 7,41 4,97 4,24 3,68 35 70 A
1606010 PFA 6 x 1 (8) 10,49 7,06 6,01 5,23 65 46 A
1608010 PFA 8 x 1 (10) 12,60 8,43 7,18 6,24 100 35 A
1610010 PFA 10 x 1 (12) 15,95 10,89 9,28 8,07 145 28 A
LEZ-FLON PVDF tube Lab|Chem|Med
Quality
Tolerance ISO DIN 3302.1 E2
Application laboratory, chemistry, pharmacy, medical technology, engineering, pneumatics, pressure tubing…
approx. 100 m; minimum purchase: 25 m
Dimensions Stock
in mm >= 25 m >= 100 m >= 300 m >= 500 m (*)
1601010 PVD 1 x 1 (3) 3,89 2,86 2,58 2,43 - 440 A
1602010 PVD 2 x 1 (4) 4,49 3,32 3,01 2,82 - 220 A
1603010 PVD 3 x 1 (5) 5,73 4,28 3,88 3,64 - 146 A
1604010 PVD 4 x 1 (6) 7,19 5,25 4,76 4,46 - 110 A
1605010 PVD 5 x 1 (7) 8,54 6,26 5,68 5,32 - 88 A
1606010 PVD 6 x 1 (8) 9,90 7,28 6,60 6,18 - 73 A
1608010 PVD 8 x 1 (10) 12,60 9,32 8,45 7,92 - 55 B
1610010 PVD 10 x 1 (12) 15,52 11,36 10,30 9,65 - 44 B
(*) Delivery time: A = in stock, B = about 1 week (from partner stock), C = new production, by agreement
PFA is a fluoroplastic-copolymer; 60 +/-5 Shore D; transparent; density= 2,15; compliant: UL94V0; physical and
chemical resistance like PTFE; operating temperature -200 °C to +260 °C
Coil length
Polyvinylidene-based fluored thermoplastic; 80 +/-5 Shore D; density= 2,15; nature; compliant: UL94V0; good
mechanical properties; operating temperature 0 °C to +150 °C
Bending
radius/ mm
Burst
pressure/barCode n°
Quantity in meters €/m
Other dimensions and corrugated tubes on request
Code n°Quantity in meters €/m Bending
radius/ mm
Burst
pressure/bar
Page 26 Subject to prior sale Vers. 20|05
Part 2 Cords and profiles
LEZ-NIT Nitrile (NBR) cord Technology
Quality
Tolerance ISO DIN 3302.1 E2
Application sealing technology, (petro-)chemistry, automobile industry, mechanical and equipment engineering
Coil length
Stock
25 - 99 m >= 100 m >= 300 m >= 500 m >= 1000 m (*)
Round cords
3900020 2 0,87 0,36 0,30 0,27 0,24 A3900025 2,5 0,93 0,41 0,31 0,28 0,26 A3900030 3 1,04 0,45 0,35 0,30 0,27 A3900035 3,5 1,20 0,57 0,43 0,35 0,29 A3900040 4 1,26 0,61 0,50 0,38 0,31 A3900045 4,5 1,36 0,65 0,57 0,46 0,37 A3900050 5 1,42 0,70 0,61 0,50 0,40 A3900053 5,33 1,53 0,75 0,67 0,56 0,46 A3900060 6 1,58 0,80 0,71 0,60 0,50 A
10 to 49 m >= 50 m >= 100 m >= 300 m >= 500 m
3900070 7 1,97 1,21 0,97 0,81 0,70 A3900080 8 2,29 1,42 1,15 1,00 0,87 A3900090 9 2,57 1,61 1,32 1,15 1,02 A3900100 10 2,94 1,79 1,46 1,26 1,12 A3900110 11 3,44 2,20 1,75 1,51 1,35 A3900120 12 3,82 2,54 1,98 1,72 1,53 A
5 to 24 m >= 25 m >= 50 m >= 100 m >= 200 m
3900130 13 4,64 3,43 2,80 2,24 1,93 A3900140 14 5,73 4,06 3,36 2,69 2,40 A3900150 15 6,61 4,91 4,06 3,22 2,82 A3900160 16 7,59 5,49 4,48 3,57 3,14 A3900180 18 9,94 7,22 5,89 4,77 4,26 A3900200 20 11,63 8,69 7,08 5,75 5,09 A
LEZ-NEO Chloroprene cord Technology
Quality
Tolerance ISO DIN 3302.1 E2
Application sealing technology, (petro-)chemistry, automobile industry, mechanical and equipment engineering
Coil length 3 to 6 mm: 100 m | 7 mm to 12 mm: 50 m | 15 mm: 25 m | minimum purchase: 25 m resp. 10 m
Stock
25 - 99 m >= 100 m >= 300 m >= 500 m >= 1000 m (*)
Round cords
3600030 3 1,42 0,72 0,60 0,54 0,49 A3600040 4 1,91 0,93 0,78 0,71 0,64 A3600050 5 2,35 1,17 0,98 0,89 0,81 A3600060 6 2,62 1,30 1,09 0,99 0,90 A
10 - 49 m >= 50 m >= 100 m >= 300 m >= 500 m
3600070 7 3,11 1,63 1,36 1,24 1,12 A3600080 8 3,50 1,84 1,53 1,39 1,27 A3600100 10 5,35 3,06 2,55 2,32 2,11 A3600120 12 6,66 3,92 3,27 2,97 2,70 A3600150 15 9,45 5,92 4,93 4,49 4,08 B
(*) Delivery time: A = in stock, B = about 1 week (from partner stock), C = new production, by agreement
(**) Trademark of Buna Werke
(***) Trademark of Dupont Performance Elastomers
Quantity in meters €/mDimensions
in mmCode n°
to 6 mm: 100 m | 7 mm to 12 mm: 50 m | from 13 mm and over: 25 m |
minimum purchase: 25 m resp. 10 m and 5 m
NBR (Perbunan(**)) standard quality for general purposes; 65 +/-5 Shore A; black; density= 1,3; depending on
dimensions resistant to mineral and vegetable oils, fats, fuels, alcohols, glycols and aliphatic solvents; operating
temperature -40 °C to +80 °C, peaks up to +100 °C
Profiles and other diameters on request
Code n°Dimensions
in mm
Quantity in meters €/m
Chloroprene (Neoprene(***)); 65 +/-5 Shore A; black; density= 1,29; resistant against mineral and vegetable oils,
fats, fuels, alcohols, glycols and aliphatic solvents, alkaline solutions, diluted acids and saline solutions, ozone,
water and different weather conditions; good ageing resistance; operating temperature -30 °C to +90 °C
Vers. 20|05 Subject to prior sale Page 27
Part 2 Cords and profiles
LEZ-EPEM 60 EPDM cord Quality
Tolerance ISO DIN 3302.1 E2
Application sealing technology, chemistry, construction industry, automobile industry, mechanical engineering,…
Stock
>= 100 m >= 200 m >= 500 m >= 1000 m (*)
Round cords
7600020 2 100 0,27 0,16 0,13 0,12 A
7600030 3 100 0,38 0,25 0,22 0,20 A
7600040 4 100 0,43 0,31 0,27 0,24 A
7600050 5 50 0,54 0,38 0,33 0,30 A
7600060 6 50 0,75 0,49 0,43 0,38 A
>= 50 m >= 100 m >= 300 m >= 500 m
7600070 7 50 0,97 0,67 0,58 0,53 A
7600080 8 50 1,13 0,80 0,70 0,63 A
7600090 9 50 1,45 1,09 0,95 0,85 A
7600100 10 50 1,51 1,13 0,98 0,88 A
7600120 12 50 2,26 1,73 1,50 1,35 A
7600130 13 50 3,23 2,45 2,13 1,92 A
>= 25 m >= 50 m >= 100 m >= 200 m
7600150 15 25 3,77 2,87 2,49 2,25 A
7600160 16 25 4,41 3,42 2,98 2,67 A
7600180 18 25 6,08 4,67 4,06 3,66 A
7600200 20 25 6,24 4,82 4,19 3,76 A
7600250 25 25 9,79 7,54 6,56 5,90 A
>= 20 m >= 40 m >= 100 m >= 200 m
7600300 30 20 12,91 9,85 8,57 7,71 B
7600400 40 10 29,60 22,72 19,75 17,78 B
(*) Delivery time: A = in stock, B = about 1 week (from partner stock), C = new production, by agreement
- Fire resistant quality
Technology
Also on request
- tubes of EPDM
- square and rectangular profiles of EPDM
- profiles of EPDM according to drawings
Quantity in meters €/m Coil length
in mCode n°
Dimensions
in mm
Other dimensions and hardnesses on request
EPDM standard quality for general purposes; 60 +/-5 Shore A; black; very good resistance against diluted acids and
bases, ketones, alcohols and glycols; good resistance against esters and chlorinated water; conditionally resistant
against vegetable and animal oils and fats; low resistance against mineral oils, fats and fuels; very good resistance to
ageing, weather, UV-rays and ozone; good compression set; operating temperature -30 °C to +150 °C, good low-
temperature flexibility.
Page 28 Subject to prior sale Vers. 20|05
Part 2 Cords and profiles
LEZ-EPEX 15 EPDM sponge rubber cord Technology
Quality
Tolerance ISO DIN 3302.1 E3
Application sealing technology, chemistry, construction industry, automobile industry, mechanical engineering
Dimensions Unit (U) Stock
in mm in m 1-2 U 3-4 U 5-9 U >=10 U (*)
Cords
7700020 2 200 0,22 0,15 0,14 0,13 A
7700025 2,5 200 0,27 0,18 0,17 0,15 A
7700030 3 200 0,32 0,23 0,21 0,19 A
7700040 4 200 0,38 0,28 0,25 0,23 A
7700050 5 200 0,43 0,31 0,27 0,25 A
7700060 6 200 0,48 0,35 0,31 0,28 A
7700070 7 200 0,59 0,46 0,40 0,37 A
7700080 8 200 0,65 0,51 0,45 0,40 A
7700090 9 200 0,86 0,70 0,61 0,56 A
7700100 10 100 0,91 0,74 0,64 0,59 A
7700120 12 100 1,18 0,96 0,84 0,76 A
7700140 14 50 1,72 1,41 1,23 1,12 A
7700150 15 50 1,78 1,48 1,29 1,17 A
7700180 18 25 2,85 2,34 2,04 1,85 A
7700200 20 25 2,91 2,38 2,07 1,88 A
7700220 22 25 4,14 3,44 2,99 2,72 A
7700250 25 25 4,90 4,06 3,53 3,21 A
7700300 30 20 6,30 5,24 4,56 4,14 A
7700350 35 20 10,01 8,36 7,27 6,61 B
7700400 40 20 13,88 11,57 10,06 9,15 B
7700450 45 10 16,95 14,14 12,30 11,18 B
7700500 50 10 19,26 16,07 13,97 12,70 B
(*) Delivery time: A = in stock, B = about 1 week (from partner stock), C = new production, by agreement
See also square and rectangular profiles on page 30
Sponge rubber made of EPDM; about 15 Shore A; black; density= 0,45 +/-0,5; very good resistance against diluted
acids and bases, ketones, alcohols and glycols; Good resistance against esters and chlorinated water;
conditionally resistant against vegetable and animal oils and fats; low resistance against mineral oils and fats and
fuels; very good resistance to ageing, different weather conditions, UV-rays and ozone; good compression set;
operating temperature -10 °C to +110 °C, peaks up to +150 °C, good low-temperature flexibility
Quantity in meters €/mCode n°
Other dimensions and Shore hardnesses on request
Other profiles according to drawings on request
Vers. 20|05 Subject to prior sale Page 29
Part 2 Cords and profiles
LEZ-EPEX 15 EPDM sponge rubber profile Technology
Quality see EPDM sponge rubber cord on page 29
Tolerance ISO DIN 3302.1 E3
Application sealing technology, chemistry, construction and mechanical engineering, automobile industry,
equipment manufacturing, gaskets for containers and tanks, thermal and phonic insulating
Dimensions Unit (U) Stock
in mm in m 1-2 U 3-4 U 5-9 U >=10 U (*)
Rectangular profiles supplied in coils
7710020 10 x 2 100 0,48 0,33 0,29 0,27 B
7720020 20 x 2 100 0,70 0,51 0,45 0,41 B
7710030 10 x 3 100 0,59 0,40 0,35 0,32 B
7715030 15 x 3 100 0,75 0,57 0,50 0,45 B
7720030 20 x 3 100 0,86 0,66 0,58 0,52 B
7725030 25 x 3 50 1,08 0,82 0,71 0,65 B
7730030 30 x 3 50 1,18 0,92 0,80 0,73 B
7740030 40 x 3 50 1,40 1,13 0,98 0,89 B
7750030 50 x 3 50 1,94 1,60 1,39 1,27 B
7710040 10 x 4 100 0,75 0,55 0,48 0,44 B
7720040 20 x 4 100 1,02 0,78 0,68 0,62 B
7725040 25 x 4 50 1,18 0,92 0,80 0,73 B
7730040 30 x 4 50 1,40 1,09 0,95 0,86 B
7740040 40 x 4 50 1,78 1,47 1,28 1,16 B
7710050 10 x 5 100 0,75 0,55 0,48 0,44 B
7715050 15 x 5 50 1,02 0,77 0,67 0,61 B
7720050 20 x 5 50 1,18 0,92 0,80 0,73 B
7725050 25 x 5 50 1,40 1,13 0,98 0,89 B
7730050 30 x 5 50 1,66 1,33 1,16 1,05 B
7740050 40 x 5 50 2,04 1,67 1,45 1,32 B
7750050 50 x 5 25 2,64 2,11 1,84 1,67 B
7710060 10 x 6 100 0,91 0,66 0,58 0,52 B
7712060 12 x 6 100 1,02 0,78 0,68 0,62 B
7715060 15 x 6 100 1,24 0,95 0,83 0,75 B
7720060 20 x 6 50 1,40 1,13 0,98 0,89 B
7730060 30 x 6 50 1,83 1,50 1,31 1,19 B
7740060 40 x 6 25 2,69 2,18 1,90 1,73 B
7750060 50 x 6 25 3,28 2,69 2,34 2,13 B
7710070 10 x 7 100 1,08 0,87 0,76 0,69 B
7708080 8 x 8 100 1,02 0,77 0,67 0,61 B
7710080 10 x 8 100 1,24 0,95 0,83 0,75 B
7712080 12 x 8 50 1,29 0,99 0,86 0,78 B
7718080 18 x 8 50 1,66 1,36 1,19 1,08 B
7720080 20 x 8 50 1,72 1,40 1,22 1,11 B
7730080 30 x 8 50 2,74 2,22 1,93 1,75 B
7740080 40 x 8 25 3,55 2,90 2,52 2,29 B
7750080 50 x 8 25 4,63 3,72 3,23 2,94 B
Quantity in meters €/mCode n°
Continued on page 31
Page 30 Vers. 20|05
Part 2 Cords and profiles
LEZ-EPEX 15 EPDM sponge rubber profile Technology
Dimensions Unit (U) Stock
in mm in m 1-2 U 3-4 U 5-9 U >=10 U (*)
7710100 10 x 10 50 1,13 0,89 0,77 0,70 B
7712100 12 x 10 50 1,35 1,06 0,92 0,84 B
7715100 15 x 10 50 1,56 1,23 1,07 0,97 B
7720100 20 x 10 50 1,78 1,43 1,25 1,13 B
7725100 25 x 10 50 2,26 1,88 1,63 1,48 B
7730100 30 x 10 25 2,91 2,35 2,05 1,86 B
7735100 35 x 10 25 3,55 2,90 2,52 2,29 B
7740100 40 x 10 25 3,66 3,02 2,63 2,39 B
7745100 45 x 10 25 4,68 3,89 3,38 3,07 B
7750100 50 x 10 25 4,84 3,99 3,47 3,15 B
7760100 60 x 10 25 6,08 5,06 4,40 4,00 B
7712120 12 x 12 50 1,51 1,19 1,04 0,94 B
7715120 15 x 12 50 1,88 1,53 1,33 1,21 B
7720120 20 x 12 50 2,37 1,98 1,72 1,56 B
7725120 25 x 12 50 3,12 2,52 2,19 2,00 B
7730120 30 x 12 25 3,55 2,93 2,55 2,32 B
7740120 40 x 12 25 4,74 3,92 3,41 3,10 B
7750120 50 x 12 25 6,08 5,08 4,42 4,02 B
7715150 15 x 15 50 2,26 1,88 1,63 1,48 B
7720150 20 x 15 25 2,91 2,35 2,05 1,86 B
7725150 25 x 15 25 3,66 3,04 2,64 2,40 B
7730150 30 x 15 25 4,09 3,38 2,94 2,67 B
7735150 35 x 15 25 4,95 4,06 3,53 3,21 B
7740150 40 x 15 25 5,33 4,40 3,83 3,48 B
7750150 50 x 15 25 6,89 5,70 4,95 4,50 B
7720200 20 x 20 25 3,66 3,04 2,64 2,40 B
7725200 25 x 20 25 4,74 3,92 3,41 3,10 B
7730200 30 x 20 25 5,33 4,40 3,83 3,48 B
7735200 35 x 20 25 6,13 5,06 4,40 4,00 B
7740200 40 x 20 25 6,89 5,70 4,95 4,50 B
7745200 45 x 20 25 7,64 6,33 5,51 5,01 B
7750200 50 x 20 25 8,07 6,68 5,81 5,28 B
7725250 25 x 25 25 5,71 4,74 4,12 3,75 B
7730250 30 x 25 25 6,51 5,38 4,68 4,25 B
7735250 35 x 25 25 7,64 6,33 5,51 5,01 B
7740250 40 x 25 25 8,83 7,29 6,34 5,76 B
7745250 45 x 25 15 9,90 8,24 7,17 6,52 B
7750250 50 x 25 15 11,41 9,52 8,28 7,52 B
7730300 30 x 30 20 7,26 6,02 5,23 4,76 B
7735300 35 x 30 15 8,39 6,97 6,06 5,51 B
7740300 40 x 30 15 10,28 8,56 7,45 6,77 B
7745300 45 x 30 15 12,27 10,19 8,86 8,05 B
7750300 50 x 30 15 13,35 11,11 9,66 8,78 B
7735350 35 x 35 15 10,71 8,88 7,72 7,02 B
7740350 40 x 35 10 12,22 10,15 8,83 8,03 B
7750350 50 x 35 10 15,34 12,70 11,04 10,04 B
7740400 40 x 40 10 14,96 12,41 10,79 9,81 B
7750400 50 x 40 10 18,40 15,25 13,26 12,05 B
7750500 50 x 50 10 21,04 17,51 15,22 13,84 B
(*) Delivery time: A = in stock, B = about 1 week (from partner stock), C = new production, by agreement
Other dimensions and hardnesses on request
Quantity in meters €/mCode n°
Continued from previous page
Profiles according to drawings on request
Vers. 20|05 Subject to prior sale Page 31
Part 2 Cords and profiles
LEZ-EPEX 15 SK EPDM sponge rubber profile Technology
Rectangular profiles, self-adhesive on one side
Quality see EPDM sponge cords on page 29
self-adhesive on the broad side to simplify assembly
Tolerance ISO DIN 3302.1 E3
Application sealing technology, chemistry, construction sector, automobile industry, mechanical engineering, …
Dimensions Unit (U) Stock
in mm in m 1-2 U 3-4 U 5-9 U >=10 U (*)
7710020 SK 10 x 2 100 0,86 0,64 0,56 0,51 B
7715020 SK 15 x 2 100 1,18 0,90 0,79 0,71 B
7720020 SK 20 x 2 100 1,35 1,07 0,93 0,85 B
7710030 SK 10 x 3 100 0,86 0,70 0,61 0,55 B
7715030 SK 15 x 3 100 1,24 0,95 0,83 0,75 B
7720030 SK 20 x 3 100 1,61 1,30 1,13 1,02 B
7725030 SK 25 x 3 50 1,99 1,64 1,42 1,29 B
7730030 SK 30 x 3 50 2,37 1,94 1,69 1,54 B
7710040 SK 10 x 4 100 1,08 0,84 0,73 0,66 B
7715040 SK 15 x 4 100 1,56 1,23 1,07 0,97 B
7720040 SK 20 x 4 100 1,88 1,50 1,31 1,19 B
7725040 SK 25 x 4 50 2,10 1,71 1,48 1,35 B
7730040 SK 30 x 4 50 2,53 2,05 1,78 1,62 B
7710050 SK 10 x 5 100 2,10 0,78 0,68 0,62 B
7715050 SK 15 x 5 50 1,66 1,33 1,16 1,05 B
7720050 SK 20 x 5 50 1,99 1,60 1,39 1,27 B
7725050 SK 25 x 5 50 2,37 1,94 1,69 1,54 B
7730050 SK 30 x 5 50 3,01 2,39 2,08 1,89 B
7740050 SK 40 x 5 50 3,77 3,07 2,67 2,43 B
7710060 SK 10 x 6 100 1,24 0,92 0,80 0,73 B
7715060 SK 15 x 6 100 1,99 1,57 1,36 1,24 B
7720060 SK 20 x 6 50 2,31 1,88 1,63 1,48 B
7725060 SK 25 x 6 50 2,85 2,25 1,96 1,78 B
7730060 SK 30 x 6 50 3,17 2,56 2,22 2,02 B
7710080 SK 10 x 8 100 1,72 1,36 1,19 1,08 B
7712080 SK 12 x 8 50 1,83 1,43 1,25 1,13 B
7720080 SK 20 x 8 50 2,96 2,32 2,02 1,83 B
7730080 SK 30 x 8 50 4,09 3,38 2,94 2,67 B
7740080 SK 40 x 8 25 5,54 4,54 3,94 3,59 B
7710100 SK 10 x 10 50 1,66 1,33 1,16 1,05 B
7715100 SK 15 x 10 50 2,53 2,05 1,78 1,62 B
7720100 SK 20 x 10 50 2,80 2,29 1,99 1,81 B
7725100 SK 25 x 10 50 3,98 3,24 2,82 2,56 B
7730100 SK 30 x 10 25 4,41 3,58 3,11 2,83 B
7740100 SK 40 x 10 25 6,03 4,93 4,29 3,90 B
7712120 SK 12 x 12 50 2,15 1,71 1,48 1,35 B
7715150 SK 15 x 15 50 3,50 2,80 2,43 2,21 B
7720150 SK 20 x 15 25 4,68 3,75 3,26 2,97 B
7730150 SK 30 x 15 25 6,30 5,12 4,45 4,04 B
7740150 SK 40 x 15 25 7,75 6,37 5,54 5,03 B
7720200 SK 20 x 20 25 5,81 4,77 4,15 3,77 B
7725200 SK 25 x 20 25 6,89 5,63 4,90 4,45 B
7730200 SK 30 x 20 25 7,75 6,37 5,54 5,03 B
7740200 SK 40 x 20 25 10,44 8,59 7,47 6,79 B
7725250 SK 25 x 25 25 8,07 6,68 5,81 5,28 B
7740300 SK 40 x 30 15 14,63 12,10 10,52 9,56 B
(*) Delivery time: A = in stock, B = about 1 week (from partner stock), C = new production, by agreement
Profiles according to drawings on request
Quantity in meters €/mCode n°
Other dimensions and Shore hardnesses on request
Page 32 Subject to prior sale Vers. 20|05
Part 2 Cords and profiles
LEZ-SAN 65 Santoprene® cord and profile Food|Pharma|Med
Thermoplastic elastomer, FDA-compliant
Quality
Tolerance ISO DIN 3302.1 E1
Application
Coil length
Stock
25 - 99 m >= 100 m >= 300 m >= 500 m >= 1000 m (*)
Round cords
7000017 1,75 appr. 500 1,12 0,61 0,52 0,46 0,42 A
7000020 2 100 1,23 0,66 0,56 0,50 0,45 A
7000030 3 100 1,34 0,73 0,61 0,56 0,50 A
7000040 4 100 1,45 0,85 0,73 0,65 0,58 A
7000050 5 100 1,71 0,97 0,84 0,76 0,68 A
7000060 6 100 2,09 1,13 0,99 0,89 0,81 A
10 - 49 m >= 50 m >= 100 m >= 300 m >= 500 m
7000070 7 50 2,79 1,65 1,49 1,34 1,20 A
7000080 8 50 3,05 1,74 1,57 1,41 1,27 A
7000090 9 50 3,75 2,30 2,06 1,85 1,67 A
7000100 10 50 4,45 2,57 2,31 2,08 1,88 A
7000120 12 25 6,21 3,67 3,30 2,97 2,67 A
7000150 15 25 8,78 5,73 5,16 4,64 4,18 A
7000200 20 25 15,10 10,08 9,08 8,17 7,35 A
Square profiles
7005050 5 x 5 50 2,09 1,16 1,04 0,94 0,84 C
7010100 10 x 10 50 5,46 3,17 2,85 2,56 2,32 C
(*) Delivery time: A = in stock, B = about 1 week (from partner stock), C = new production, by agreement
(**) Trademark of ExxonMobil
Other diameters and hardnesses on request
Square profiles and according to drawings on request
Hot-welded circular joints on request
Santoprene® LEZ-SAN is also available as sheet and plate material
(See Part 3 in this price list: Films and sheets)
Can be easily welded by means of mirror processing, e.g. to make endless circular joints (by heating both ends!)
Excellent alternative for EPDM or Chloroprene- cords and more cost effective in the long term.
The material LEZ-SAN can be recycled !
gaskets in pharmacy, medicine, chemistry, biology, filling technology, beverage industry, wine tanks,
Santoprène® (**) is a thermoplastic elastomer type PP-EPDM; 65 +/-5 Shore A; beige; density= 0,97; compliant: FDA
§177,2600, NSF51, Global migration conform acc. to EC 10/2011; very good chemical resistance in aqueous
media, against acids, bases and a many of organic, solvents, particularly against ketones and aldehydes; withstands
lightspraying of oils or fuels without serious damage; does not resist against hydrocarbons, fuels, oilsor hydraulic
fluids; very good resistance to UV-rays and ozone, excellent ageing resistance; particularly good deformation and
bending resistance; compression set (RDC): 23% at 25 °C, 168 h; operating temperature -45 °C to +135 °C, short
peaks up to 150 °C
Coil length
in m
Dimensions
in mm
Quantity in meters €/mCode n°
construction of containers and cisterns in the food, cosmetics and pharmaceutical industry, mechanical
see table
construction, household equipment …
Vers. 20|05 Subject to prior sale Page 33
Part 2 Cords and profiles
LEZ-SANTEC 60 Santoprene® cord and profile Technology
Thermoplastic elastomer made of Santoprene® (**)
Quality
Tolerance ISO DIN 3302.1 E2
Application seals for laboratory equipment, chemical installations, mechanical engineering, equipment
manufacturing, container construction
Coil length see table
Stock
25 - 99 m >= 100 m >= 300 m >= 500 m >= 1000 m (*)
Round cords Coil length: up to 6mm: 100 m; 7 mm to 12 mm: 50 m; from 14 mm and over: 25 m
3700020 2 0,95 0,44 0,39 0,36 0,34 A
3700025 2,5 0,95 0,46 0,41 0,37 0,36 A
3700030 3 1,06 0,48 0,43 0,39 0,37 A
3700035 3,5 1,06 0,50 0,45 0,41 0,39 A
3700040 4 1,17 0,56 0,50 0,46 0,44 A
3700050 5 1,27 0,66 0,58 0,54 0,51 A
3700053 5,33 1,38 0,70 0,62 0,57 0,54 A
3700060 6 1,49 0,77 0,69 0,63 0,60 A
10 - 49 m >= 50 m >= 100 m >= 300 m >= 500 m
3700070 7 1,75 0,92 0,82 0,75 0,71 A
3700080 8 1,96 1,00 0,89 0,82 0,78 A
3700090 9 2,17 1,15 1,02 0,94 0,89 A
3700100 10 2,55 1,42 1,26 1,16 1,10 A
3700110 11 3,34 1,77 1,58 1,45 1,38 A
3700120 12 4,03 2,19 1,95 1,79 1,71 A
5 - 24 m >= 25 m >= 50 m >= 100 m >= 300 m
3700140 14 7,21 3,88 3,45 3,16 3,02 A
3700150 15 7,90 4,38 3,90 3,57 3,41 A
3700200 20 12,31 7,83 6,96 6,38 6,09 A
Square and rectangular profiles Coil length: 50 m
10 - 49 m >= 50 m >= 200 m >= 500 m >= 1000 m
3705050 5 x 5 2,33 1,25 1,11 1,02 0,98 A
3710100 10 x 10 4,40 2,37 2,11 1,93 1,85 A
(*) Delivery time: A = in stock, B = about 1 week (from partner stock), C = new production, by agreement
(**) Trademark of ExxonMobil
Profiles according to drawings on request
Dimensions
in mm
Quantity in meters €/mCode n°
On request: manufacturing of endless, hot-welded circular joints
Can be easily welded by means of mirror processing, e.g. to make endless circular joints (by heating both ends)
The material LEZ-SANTEC can be recycled.
Excellent alternative and less expensive in the long term than EPDM or Chloroprene
Type PP-EPDM for general purposes; 60 +/-5 Shore A; black; very good chemical resistance against acids, bases,
oxidizing agents and a many of organic solvents; resists against oil and fuel splashes; does not resisist to
permanent contact with hydrocarbons, fuels, oils or oil-based hydraulic fluids; very good resistance against UV-
rays and ozone; excellent ageing resistance; particularly resistant to deformation; compression set (RDC): 28% at
23 °C/24h; operating temperature -45 °C to +120 °C, peaks up to 150 °C
Other diameters and square or rectangular profiles on request
Page 34 Subject to prior sale Vers. 20|05
Part 2 Cords and profiles
LEZ-GOM soft rubber cord and profile Food|Pharma|Med
Quality
Tolerance ISO DIN 3302.1 E2
Application
sealing technology, construction of containers for food and pharmaceutical products
Coil length see table
Dimensions Stock
in mm 25 to 99 m >= 100 m >= 300 m >= 500 m >= 1000 m (*)
Round cords
3500020 2 0,96 0,49 0,43 0,37 0,36 A3500025 2,5 1,02 0,52 0,46 0,40 0,38 A3500030 3 1,18 0,55 0,49 0,43 0,41 A3500035 3,5 1,23 0,58 0,52 0,46 0,44 A3500040 4 1,29 0,66 0,58 0,52 0,50 A3500050 5 1,39 0,73 0,66 0,58 0,56 A3500060 6 1,71 0,84 0,75 0,67 0,64 A
10 to 49 m >= 50 m >= 100 m >= 300 m >= 500 m
3500070 7 1,98 1,00 0,90 0,81 0,77 A3500080 8 2,20 1,15 1,03 0,93 0,88 A3500090 9 2,30 1,33 1,20 1,08 1,02 A3500100 10 2,52 1,60 1,43 1,29 1,22 A3500110 11 3,37 2,09 1,88 1,69 1,61 A3500120 12 4,18 2,53 2,27 2,03 1,94 A
5 to 24 m >= 25 m >= 50 m >= 100 m >= 300 m
3500140 14 5,73 4,08 3,66 3,29 3,13 A3500150 15 6,53 4,62 4,16 3,74 3,56 A3500160 16 7,34 5,19 4,66 4,19 3,99 A3500180 18 8,68 6,20 5,58 5,01 4,77 A3500200 20 10,28 7,22 6,49 5,83 5,55 A
Square profiles
25 to 99 m >= 100 m >= 300 m >= 500 m >= 1000 m
3504040 4 x 4 2,04 1,14 0,97 0,87 0,83 A3505050 5 x 5 2,14 1,21 1,08 0,96 0,91 A3506060 6 x 6 2,25 1,35 1,18 1,06 1,01 A3508080 8 x 8 2,79 1,78 1,52 1,36 1,30 A
10 to 49 m >= 50 m >= 100 m >= 300 m >= 500 m
3510100 10 x 10 3,96 2,50 2,24 2,02 1,92 A3512120 12 x 12 4,87 3,56 3,17 2,84 2,70 A3515150 15 x 15 7,23 5,20 4,66 4,19 3,99 A
LEZ-GOMEX foam rubber cord Food|Pharma|Med
Quality
Tolerance ISO DIN 3302.1 E2
Application sealing technology, construction of containers for food and pharmaceutical products
Coil length up to 5 mm: 100 m; up to 8 mm: 50 m; 10 mm: 25 m
Dimensions Stock
in mm >= 100 m >= 300 m >= 500 m >= 1000 m >= 2000 m (*)
Round cords
3500030 EX 3 1,29 0,94 0,78 0,67 0,63 A3500040 EX 4 1,34 0,99 0,82 0,71 0,66 A3500050 EX 5 1,45 1,08 0,90 0,77 0,72 A3500060 EX 6 1,66 1,28 1,06 0,91 0,85 A3500070 EX 7 1,77 1,37 1,15 0,98 0,92 A3500080 EX 8 1,98 1,54 1,29 1,10 1,03 A3500100 EX 10 2,30 1,76 1,47 1,26 1,17 A3500120 EX 12 3,19 2,46 2,05 1,75 1,65 A
(*) Delivery time: A = in stock, B = about 1 week (from partner stock), C = new production, by agreement
Coil length: up to 8x8 mm: 100 m, up to 15x15 mm: 50 m
Coil length: to 6 mm: 100 m; to 12 mm: 50 m; 14 mm and over: 25 m
Other dimensions and profiles according drawings on request
Thermoplastic elastomer made of type SEBS; 40 +/- 5 Shore A; beige; compliant: FDA §177.2600, BfR XV;
regulations;operating temp. -50°C to +90°C, peaks up to +125 °C possible in the case of damp heat
Thermoplastic elastomer made of type SEBS; sponge rubber; about 25 +/-5 Shore; white; density= 0,5; compliant:
EC 1935/2004, EU 10/2011 ; operating temperature -50 °C to + 75 °C
Code n°Quantity in meters €/m
Quantity in meters €/m
Alternative for natural rubber
Code n°
Vers. 20|05 Subject to prior sale Page 35
Part 2 Cords and profiles
LEZ-SIL 60TF Silicone cord and profile Food|Pharma|Med
Quality
Tolerance ISO DIN 3302.1 E2
Application seals for devices and facilities in food and pharmaceutical industries
Coil length 25 m; minimum purchase= 25 m
Stock
25 to 99 m >= 100 m >= 300 m >= 500 m >= 1000 m (*)
Round cords
3000010 1 0,71 0,26 0,20 0,18 0,16 A
3000015 1,5 0,82 0,32 0,25 0,20 0,18 A
3000020 2 0,93 0,38 0,29 0,24 0,21 A
3000025 2,5 1,15 0,44 0,35 0,28 0,26 A
3000030 3 1,20 0,51 0,41 0,34 0,31 A
3000035 3,5 1,37 0,63 0,50 0,42 0,38 A
3000040 4 1,58 0,70 0,56 0,49 0,44 A
3000045 4,5 1,91 0,85 0,69 0,61 0,55 A
3000050 5 2,07 0,98 0,80 0,72 0,65 A
3000055 5,5 2,18 1,17 0,97 0,87 0,80 A
3000060 6 2,29 1,33 1,11 1,00 0,92 A
3000065 6,5 2,40 1,52 1,26 1,15 1,07 A
3000070 7 2,68 1,68 1,39 1,26 1,18 A
3000080 8 3,48 2,22 1,84 1,65 1,56 A
3000090 9 3,99 2,78 2,33 2,07 1,97 A
3000100 10 5,41 3,48 2,91 2,60 2,47 A
3000110 11 6,93 4,68 3,80 3,37 3,21 A
3000120 12 7,43 5,06 4,23 3,76 3,58 A
3000130 13 8,79 6,80 5,71 5,04 4,80 A
3000140 14 10,54 7,39 6,20 5,48 5,21 A
3000150 15 11,30 7,90 6,59 5,85 5,57 A
3000160 16 14,14 8,93 7,46 6,64 6,32 A
3000180 18 17,53 11,20 9,37 8,35 7,96 A
3000200 20 21,29 14,49 12,07 10,74 10,23 A
3000250 25 29,65 21,22 17,71 15,66 14,92 A
3000300 30 39,86 28,87 24,09 21,32 20,30 A
Rectangular profiles
3003030 3 x 3 2,02 1,01 0,81 0,73 0,68 A
3003535 3,5 x 3,5 2,40 1,20 0,96 0,87 0,81 A
304040 4 x 4 2,73 1,39 1,11 1,01 0,95 A
3005050 5 x 5 3,39 1,83 1,46 1,37 1,28 A
3006060 6 x 6 4,70 2,71 2,17 1,99 1,84 A
3007070 7 x 7 5,41 3,22 2,52 2,31 2,20 A
3008060 8 x 6 5,35 3,07 2,43 2,24 2,13 A
3008080 8 x 8 6,66 3,80 3,07 2,83 2,70 A
3010050 10 x 5 5,46 3,32 2,57 2,35 2,23 A
3010100 10 x 10 9,39 5,34 4,54 4,18 3,98 A
3015100 15 x 10 13,66 7,86 6,67 6,17 5,90 A
3020050 20 x 5 9,39 5,34 4,54 4,18 3,98 A
3020100 20 x 10 14,80 9,44 8,05 7,38 7,03 A
3020200 20 x 20 26,97 18,27 15,43 14,28 13,40 A
(*) Delivery time: A = in stock, B = about 1 week (from partner stock), C = new production, by agreement
Other dimensions and profiles according to drawings on request
Quantity in meters €/mDimensions
in mm
Silicone; 60 +/-5 Shore A; translucent; compliant: FDA §177.2600, BfR XV, EC 1935/2004 ; operating
temperature -60 °C to +200 °C
Code n°
Other qualities e.g. FDA and high temperature-resistant up to +300°C on request
Page 36 Subject to prior sale Vers. 20|05
Part 2 Cords and profiles
LEZ-SIL 60RT Silicone cord and profile Technology|Thermal Processes
Quality
Tolerance ISO DIN 3302.1 E2
Application seals for devices, facilities, industrial plants, pumps and machines, thermal processes
Coil length 25 m; minimum purchase= 25 m
Stock
25 to 99 m >= 100 m >= 300 m >= 500 m >= 1000 m (*)
Round cords
3100010 1 0,71 0,27 0,21 0,18 0,16 A
3100015 1,5 0,83 0,31 0,24 0,21 0,18 A
3100020 2 0,94 0,37 0,28 0,23 0,21 A
3100025 2,5 0,99 0,43 0,34 0,27 0,24 A
3100030 3 1,21 0,49 0,38 0,33 0,30 A
3100035 3,5 1,38 0,59 0,47 0,40 0,36 A
3100040 4 1,60 0,66 0,53 0,45 0,42 A
3100045 4,5 1,82 0,81 0,65 0,57 0,52 A
3100050 5 2,09 0,95 0,77 0,67 0,62 A
3100055 5,5 2,20 1,07 0,89 0,81 0,75 A
3100060 6 2,32 1,31 1,09 0,93 0,86 A
3100070 7 2,76 1,53 1,23 1,09 1,02 A
3100075 7,5 3,09 1,74 1,40 1,26 1,18 A
3100080 8 3,42 1,94 1,55 1,42 1,35 A
3100090 9 4,08 2,41 1,94 1,78 1,69 A
3100100 10 5,18 3,10 2,66 2,20 2,09 A
3100110 11 6,12 3,63 2,90 2,65 2,52 A
3100120 12 6,78 4,28 3,43 3,15 3,00 A
3100130 13 7,50 5,02 4,03 3,70 3,53 A
3100140 14 8,93 5,84 4,67 4,29 4,09 A
3100150 15 9,92 6,50 5,22 4,79 4,56 A
3100160 16 11,46 7,83 6,40 5,87 5,59 A
3100180 18 14,28 9,60 8,13 7,46 7,10 A
3100200 20 17,03 11,97 10,16 9,34 8,89 A
3100250 25 25,24 17,95 15,25 14,02 13,33 A
3100300 30 32,74 24,41 20,74 19,06 18,13 A
Rectangular profiles (**)
3103030 3 x 3 MQ=500 m 0,64 0,57 C
3103535 3,5 x 3,5 MQ=500 m 0,77 0,68 C
3104040 4 x 4 MQ=500 m 0,90 0,80 C
3105050 5 x 5 MQ=300 m 1,29 1,16 1,07 C
3106060 6 x 6 MQ=300 m 1,87 1,67 1,55 C
3107070 7 x 7 MQ=300 m 2,13 1,94 1,85 C
3108060 8 x 6 MQ=300 m 2,06 1,88 1,79 C
3108080 8 x 8 MQ=100 m 3,28 2,58 2,38 2,27 C
3110050 10 x 5 MQ=100 m 2,91 2,16 1,98 1,88 C
3110100 10 x 10 MQ=100 m 4,49 3,81 3,51 3,34 C
3120050 20 x 5 MQ=100 m 4,49 3,81 3,51 3,34 C
3120100 20 x 10 11,19 8,02 6,76 6,20 5,91 C
3120200 20 x 20 19,93 15,55 12,76 11,99 11,25 C
(*) Delivery time: A = in stock, B = about 1 week (from partner stock), C = new production, by agreement
(**) For this standard dimensions tool costs are included in the price
or FDA compliant and temperature-resistant up to 300 °C for ovensor fire-resistant qualities e.g. UL94 or according to other norms on request
Silicone; 60 +/-5 Shore A; reddish brown; operating temperature -60 °C to +230 °C
Code n°
Profiles according to drawings and other qualities e.g. high temperature-resistant up to +300 °C
Dimensions in
mm
Quantity in meters €/m
Vers. 20|05 Subject to prior sale Page 37
Part 2 Cords and profiles
LEZ-SILEXP 15 Silicone foam cord and profile Technology
Quality
Tolerance ISO DIN 3302.1 E3
Application sealing technology, thermal insulation, shock absorption, electrical engineering
Coil length Cords: up to 5 mm: approx. 50 m; up to 15 mm: approx. 25 m; from 20 mm: approx. 20 mProfiles: up to 12x8 mm: approx. 20-25 m; up to 25x20 mm: approx. 20 m; from 30x10 mm: approx. 10 m
Dimensions Stock
in mm 25 to 99 m >= 100 m >= 300 m >= 500 m >= 1000 m (*)
Round cords
3200020 2 1,87 0,96 0,80 0,71 0,67 A3200030 3 2,04 1,04 0,88 0,79 0,75 A3200035 3,5 2,10 1,11 0,94 0,84 0,78 A3200040 4 2,16 1,17 0,99 0,88 0,84 A3200050 5 2,33 1,34 1,14 1,01 0,96 A
5 to 24 m >= 25 m >= 100 m >= 300 m >= 500 m
3200060 6 2,57 1,56 1,33 1,18 1,13 A3200080 8 3,26 1,96 1,66 1,48 1,41 A3200100 10 4,31 2,67 2,26 2,02 1,92 A3200120 12 5,48 3,27 2,78 2,49 2,37 A3200130 13 6,36 3,82 3,26 2,93 2,79 A3200140 14 6,94 3,98 3,38 3,03 2,89 A3200150 15 7,93 4,59 3,90 3,50 3,34 A
5 to 19 m >= 20 m >= 100 m >= 300 m >= 500 m
3200200 20 12,71 7,94 6,74 6,06 5,77 A3200250 25 18,83 12,05 10,24 9,21 8,78 A3200300 30 24,31 15,85 13,43 12,06 11,49 A
Rectangular profiles 5 to 24 m >= 25 m >= 100 m >= 300 m >= 500 m
3205050 5 x 5 3,61 2,19 1,86 1,67 1,59 A3208040 8 x 4 3,73 2,27 1,92 1,70 1,63 A3208060 8 x 6 3,90 2,46 2,08 1,86 1,77 A3210030 10 x 3 3,15 1,96 1,66 1,48 1,41 A3210050 10 x 5 3,73 2,38 2,02 1,81 1,73 A3210100 10 x 10 4,02 2,56 2,16 1,94 1,85 A3212080 12 x 8 4,79 3,18 2,69 2,43 2,31 A
5 to 19 m >= 20 m >= 100 m >= 300 m >= 500 m
3212120 12 x 12 6,70 4,09 3,47 3,12 2,98 A3215050 15 x 5 4,79 2,84 2,34 2,10 2,00 A3215100 15 x 10 6,36 3,94 3,34 3,00 2,86 A3215150 15 x 15 9,33 5,85 4,97 4,47 4,25 A3220030 20 x 3 4,84 3,02 2,51 2,26 2,14 A3220050 20 x 5 5,60 3,47 2,89 2,59 2,46 A3220080 20 x 8 7,29 4,55 3,79 3,40 3,28 A3220100 20 x 10 8,68 5,25 4,47 4,01 3,82 A3220150 20 x 15 12,59 7,86 6,67 6,00 5,71 A3220200 20 x 20 15,74 10,40 8,84 7,95 7,57 A3225100 25 x 10 10,73 6,50 5,52 4,97 4,73 A3225150 25 x 15 14,92 12,07 10,26 7,49 7,14 A3225200 25 x 20 19,59 13,00 11,04 9,94 9,47 A3225250 25 x 25 24,43 16,25 13,81 12,42 11,84 A3230050 30 x 5 7,81 5,24 4,45 4,02 3,83 A3230100 30 x 10 12,53 7,86 6,67 6,00 5,71 A3230150 30 x 15 17,37 11,68 9,92 8,93 8,50 A3230200 30 x 20 23,49 15,65 13,30 11,96 11,39 A3230300 30 x 30 34,69 23,51 19,99 17,99 17,13 A3235100 35 x 10 14,69 9,16 7,79 7,00 6,65 B3235300 35 x 30 40,46 27,43 23,31 20,97 19,99 B3235350 35 x 35 46,17 32,98 28,05 25,24 24,04 A3240100 40 x 10 15,74 10,40 8,84 7,95 7,57 A3240150 40 x 15 22,86 15,60 13,22 11,92 11,36 A3240200 40 x 20 29,84 20,80 17,67 15,90 15,15 A3240300 40 x 30 38,89 27,85 23,67 21,33 20,32 B3240400 40 x 40 51,88 37,03 31,46 28,38 27,03 B3250100 50 x 10 19,47 13,00 11,04 9,94 9,47 A3250200 50 x 20 35,39 24,56 20,95 18,93 18,06 A
(*) Delivery time : A = in stock, B = about 1 week (from partner stock), C = new production, by agreement
Silicone; 60 +/-5 Shore 00 (15 +/- 5 Shore A); white; density= 0,25; with fine-pored closed cells, extruded cords
and profiles, all the faces with skin; good resistance to elongation, good restoring force; operating temperature -
50 °C to +200 °C
Quantity in meters €/mCode n°
Other dimensions, hardnesses (e.g. 25 Shore A), profiles acc. To drawings and self-adhesive version on request
Other qualities e.g. FDA-compliant and fire resistant according to UL94-V0 on request
Page 38 Subject to prior sale Vers. 20|05
Part 2 Cords and profiles
LEZ-VIT 70 Viton® cord and profile Technology
Quality
Tolerance ISO DIN 3302.1 E2
Application seals for laboratory, chemical plants, mechanical and equipment engineering, oil and gas lines
Coil length up to 13 mm and up to 20x10 mm: approx. 25 m; from 14 mm and 20x20 mm: approx. 10 m
Dimensions Stock
in mm 5 to 24 m >=25 m >= 50 m >= 100 m >= 200 m (*)
Round cords
3300020 2 2,92 2,01 1,83 1,65 1,54 A
3300025 2,5 3,13 2,17 2,04 1,91 1,77 A
3300030 3 3,93 2,57 2,42 2,27 2,11 A
3300035 3,5 4,93 3,36 3,19 3,02 2,71 A
3300040 4 5,41 3,75 3,52 3,28 2,96 A
3300045 4,5 5,94 4,36 4,05 3,75 3,38 A
3300050 5 6,52 4,82 4,46 4,10 3,68 A
3300053 5,33 7,37 5,53 5,05 4,57 4,12 A
3300055 5,5 7,90 5,87 5,33 4,79 4,42 A
3300060 6 8,49 6,34 5,79 5,23 4,86 A
3300065 6,5 10,40 7,37 6,63 5,90 5,45 A
3300070 7 11,46 8,40 7,50 6,60 6,04 A
3300075 7,5 12,36 9,03 8,14 7,24 6,74 A
3300080 8 14,48 9,85 8,87 7,88 7,25 A
3300090 9 17,98 12,52 11,12 9,71 9,08 A
3300100 10 20,79 14,78 13,23 11,68 11,05 A
3300110 11 23,50 17,45 15,90 14,49 13,79 A
3300120 12 26,42 20,26 18,57 16,89 16,11 A
3300130 13 30,39 23,64 21,67 19,70 18,79 A
5 to 9 m >= 10 m >= 30 m >= 50 m >= 100 m
3300140 14 34,42 27,30 24,98 22,73 21,67 A
3300150 15 39,84 30,96 28,42 25,82 24,63 A
3300160 16 44,98 35,18 32,22 29,27 27,86 A
3300180 18 54,53 43,90 40,24 36,59 34,90 A
3300200 20 66,57 53,89 49,39 44,89 42,71 A
3300250 25 99,83 83,51 76,55 69,58 66,14 A
3300300 30 179,03 148,76 136,35 123,94 117,80 C
Rectangular profiles 5 to 24 m >=25 m >= 50 m >= 100 m >= 200 m
3305050 5 x 5 8,01 5,80 5,10 4,59 4,27 A
3306060 6 x 6 11,35 8,35 7,35 6,61 6,15 A
3308080 8 x 8 19,94 14,85 13,07 11,76 10,94 A
3310005 10 x 5 15,91 11,60 10,21 9,19 8,54 A
3310010 10 x 10 32,04 23,20 20,41 18,37 17,09 A
3315005 15 x 5 23,71 17,40 15,31 13,78 12,82 A
3315010 15 x 10 45,14 34,80 30,62 27,56 25,63 A
3315015 15 x 15 67,69 52,20 45,93 41,34 38,45 A
3320005 20 x 5 31,93 23,20 20,41 18,37 17,09 A
3320010 20 x 10 60,84 46,40 40,83 36,75 34,17 A
5 to 9 m >= 10 m >= 30 m >= 50 m >= 100 m
3320020 20 x 20 119,30 92,79 81,66 73,49 68,35 C
3330200 30 x 20 167,52 139,19 122,49 110,24 102,52 C
(*) Delivery time : A = in stock, B = about 1 week (from partner stock), C = new production, by agreement(**) Trademark from Dupont Performance Elastomers
Quantity in meters €/mCode n°
Other dimensions, quality FDA-compliant and according to UL94-V0 on requestJoints endless vulcanized and glued with fluoroelastomer glue on request
100 % fluoroelastomer made of Viton® (**); 70 +/-5 Shore A; black; density= 1,85; resistant against acids,
oxidizing agents, aliphatic, aromatic and halogen-substituted, hydrocarbons, fuels, diesel, gasoline, oils and
hydraulic fluids; particularly resistant to deformations, good compression set (RDC); operating temperature -15
°C to +200 °C, peaks up to +300 °C
Vers.20|05 Subject to prior sale Page 39
Part 2 Cords and profiles
LEZ-VITMOOS E20 Viton® sponge cord and profile Chemistry|Technology
Quality
Tolerance ISO DIN 3302.1 E3
Application
Coil lengthDimensions Stock
in mm 10 to 49 m >= 50 m >= 100 m >= 300 m >= 500 m (*)
Round cords
3800030 3 2,76 1,97 1,78 1,60 1,52 A3800040 4 4,03 2,88 2,59 2,33 2,21 A3800050 5 5,09 3,63 3,27 2,94 2,80 A3800060 6 6,62 4,73 4,25 3,83 3,64 A3800070 7 8,56 6,11 5,50 4,95 4,70 A3800080 8 10,13 7,23 6,51 5,86 5,57 A3800100 10 15,10 10,78 9,71 8,73 8,30 A
5 to 24 m >= 25 m >= 50 m >= 100 m >= 200 m
3800120 12 20,66 16,53 14,87 13,39 12,72 A3800150 15 29,01 23,21 20,88 18,80 17,86 A3800180 18 41,03 32,82 29,54 26,59 25,26 A
5 to 9 m >= 10 m >= 20 m >= 40 m >= 100 m
3800200 20 52,74 43,95 39,56 35,60 33,82 A3800220 22 63,29 52,74 47,47 42,72 40,58 A3800250 25 81,72 68,10 61,29 55,16 52,41 A3800300 30 145,58 121,32 109,19 98,27 93,35 A3800350 35 198,15 165,12 148,61 133,75 127,06 C3800400 40 258,80 215,67 194,10 174,69 165,96 C3800450 45 327,55 272,96 245,66 221,10 210,04 C3800500 50 404,38 336,99 303,29 272,96 259,31 C
Rectangular profiles 10 to 49 m >= 50 m >= 100 m >= 300 m >= 500 m
3820030 20 x 3 14,31 11,45 10,30 9,27 8,81 A3830030 30 x 3 21,47 17,17 15,45 13,91 13,21 A3840030 40 x 3 28,62 22,90 20,61 18,55 17,62 A3815040 15 x 4 14,31 11,45 10,30 9,27 8,81 A3805050 5 x 5 5,96 4,77 4,29 3,86 3,67 A3810050 10 x 5 11,93 9,54 8,59 7,73 7,34 A3815050 15 x 5 17,89 14,31 12,88 11,59 11,01 A3820050 20 x 5 20,27 16,22 14,60 13,14 12,48 A
5 to 24 m >= 25 m >= 50 m >= 100 m >= 200 m
3825050 25 x 5 28,62 23,85 21,47 19,32 18,35 A3830050 30 x 5 34,34 28,62 25,76 23,18 22,02 A3835050 35 x 5 40,07 33,39 30,05 27,05 25,69 C3840050 40 x 5 45,79 38,16 34,34 30,91 29,36 A3850050 50 x 5 57,24 47,70 42,93 38,64 36,71 C3810100 10 x 10 22,97 19,14 17,23 15,51 14,73 A3815100 15 x 10 35,26 29,38 26,44 23,80 22,61 A3820100 20 x 10 45,79 38,16 34,34 30,91 29,36 A3825100 25 x 10 57,24 47,70 42,93 38,64 36,71 A3830100 30 x 10 68,69 57,24 51,52 46,36 44,05 A3815150 15 x 15 51,52 42,93 38,64 34,77 33,03 A3820150 20 x 15 68,69 57,24 51,52 46,36 44,05 A
5 to 9 m >= 10 m >= 20 m >= 40 m >= 100 m
3835100 35 x 10 80,14 66,78 60,10 54,09 51,39 C3840100 40 x 10 91,58 76,32 68,69 61,82 58,73 C3825150 25 x 15 85,86 71,55 64,40 57,96 55,06 C3830150 30 x 15 103,03 85,86 77,27 69,55 66,07 A3835150 35 x 15 120,20 100,17 90,15 81,14 77,08 C3840150 40 x 15 137,38 114,48 103,03 92,73 88,09 C3850160 50 x 16 (***) 159,00 132,50 119,25 107,33 101,96 A3820200 20 x 20 91,58 76,32 68,69 61,82 58,73 A3825200 25 x 20 114,48 95,40 85,86 77,27 73,41 A3830200 30 x 20 137,38 114,48 103,03 92,73 88,09 A3835200 35 x 20 160,27 133,56 120,20 108,18 102,77 A3840200 40 x 20 183,17 152,64 137,38 123,64 117,46 A3825250 25 x 25 143,10 119,25 107,33 96,59 91,76 A3830300 30 x 30 206,06 171,72 154,55 139,09 132,14 A3840300 40 x 30 274,75 228,96 206,06 185,46 176,18 C3835350 35 x35 280,48 233,73 210,36 189,32 179,86 C3840400 40 x 40 366,34 305,28 274,75 247,28 234,91 C
(*) Delivery time: A = in stock, B = about 1 week (from partner stock), C = new production, by agreement(**) Trademark of Dupont Performance Elastomers
(***) about 40 Shore A, tolerances 50 +/- 5 mm x 16 +/- 1,5 mm
Quality FDA on request
Code n°
Other dimensions and hardnesses (e.g. about 20 Shore A) on request
Viton®(**) foam; about 30 Shore A; black; density= about 0,9; compliant: UL94V0; rectangular profiles with rounded
angles(r= 1 mm); extruded cords and rectangular profiles with closed cells and skin on all faces; resistant against acids,
aliphatic, aromatic and halogen-substituted hydrocarbons, natural gas, fuels, fats, mineral and vegetable oils, hydraulic
fluids, alcohols and glycols; operating temperature -20 °C to +200 °C, peaks up to +300 °C.
seals for laboratory devices, chemical plants, painting units, oil industry, petrochemistry, tanks and containers for
chemical products, fuels and oils, incineration and combustion plants
Quantity in meters €/menv. 50 m|25 m|10 m et 5 m (depending on the dimensions) (ask us)
Page 40 Subject to prior sale Vers. 20|05
Part 2 Cords and profiles
LEZ-VITCHEM 70GF Viton® cord
See Viton® tubes LEZ-VITCHEM 70GF page 21
Quality
Tolerance ISO DIN 3302.1 E2
Application
Coil length
Dimensions Stock
in mm 5 to 24 m >= 25 m >= 50 m >= 100 m >= 200 m (*)
7300020 GF 2 3,18 2,19 2,00 1,80 1,68 A
7300030 GF 3 4,24 2,80 2,64 2,48 2,30 A
7300035 GF 3,53 5,41 3,66 3,48 3,29 2,96 A
7300040 GF 4 5,89 4,33 3,84 3,58 3,23 A
7300050 GF 5 7,10 5,25 4,86 4,46 4,25 A
7300053 GF 5,33 8,01 6,03 5,50 4,98 4,75 A
7300060 GF 6 9,23 6,90 6,30 5,70 5,61 A
7300080 GF 8 15,81 10,73 9,67 8,59 7,90 A
7300100 GF 10 22,60 16,11 14,42 12,73 12,04 A
7300120 GF 12 28,75 22,08 20,25 18,41 17,56 A
(*) Delivery time: A = in stock, B = about 1 week (from partner stock), C = new production, by agreement
(**) Trademark from Dupont Performance Elastomers
LEZ-VITMOOS CHEM Viton® sponge cord and profile Chemistry|Technology
On request
Quality
Tolerance
Application
seals for laboratory devices, chemical plants, painting units, oil industry, petrochemistry, cisterns for
chemical products and oil, fuel tanks, incineration and combustion plants
Delivery time: according to prior agreement
(**) Trademark of Dupont Performance Elastomers
Chemistry|Petrochemist
ry
100 % Fluoroelastomer made of a special Viton®(**) type GF with high fluorine-content; 70 +/-5 Shore A; black
Particularly resistant against methanol, bioesters, biofuels and steam
Very good gas impermeability
gaskets for laboratory, (petro-)chemistry, mechanical and equipment engineering, hydraulics; gas and oil
pipelines, production of tanks specially for biodiesel, strong acids and steam boilers
up to 6 mm: approx. 50m; up to 12 mm: approx. 25 m
+200 °C, peaks up to +300 °C
ISO DIN 3302.1 E3
Particularly resistant against acetic acid and strong acids
Code n°Quantity in meters €/m
Other diameters, square and rectangular profiles and profiles according to drawings on request
60 Shore A available on request, used in peristaltic pumps
Viton®(**)-foam; about 30 Shore A; density= about 0,9; black; rectangular profiles with rounded angles
(r= 1 mm); extruded cords and rectangular profiles with closed cells and skin on all faces; resistant
against acids, aliphatic, aromatic and halogen-substituted hydrocarbons, natural gas, fuels, fats,
mineral and vegetable oils, hydraulic fluids, alcohols and glycols; operating temperature -10 °C to
Vers. 20|05 Subject to prior sale Page 41
Part 3 Sheets and plates
LEZ-SIL 60TF Silicone sheet and plate Food|Pharma|Med
Quality
Tolerance ISO DIN 3302.1 ST2
Application seals and joints for pharmacy, medicine, chemistry, food and refrigeration industries.
Format width: 1200 mm; roll length: up to 6mm: 10 m, from 8 mm and over: 5m; sales in linear m
20 mm: special manufacturing (size about 1000x1000 mm) on request
Thickness Stock
in mm 1,2 to 4,8 m² >= 6 m² >= 12 m² >= 24 m² (*)
4060003 0,3 30,78 24,78 21,17 19,03 A
4060005 0,5 32,14 25,52 21,83 19,65 A
4060008 0,8 42,85 35,62 30,47 27,43 A
4060010 1 44,15 35,72 31,04 27,93 A
4060015 1,5 56,28 47,76 40,94 36,84 A
4060020 2 69,60 58,86 50,84 45,75 A
4060030 3 101,63 85,62 73,58 66,22 A
4060040 4 127,08 108,10 92,84 83,56 A
4060050 5 160,52 136,19 117,06 105,35 A
4060060 6 195,32 165,75 142,48 128,23 A
4060080 8 263,68 223,77 192,35 173,11 B
4060100 10 332,14 281,95 242,36 220,98 B
4060120 12 MQ=6 m² 384,15 281,70 253,40 B
4060150 15 MQ=6 m² 506,30 371,34 334,12 B
Also available at short notice in red or white (stock at partner)
LEZ-SIL 60RT Silicone sheet and plate Technology|Therm. Processes
Quality
Tolerance ISO DIN 3302.1 ST2
Application
Format width: 1200 mm; roll length: up to 6mm: 10 m, from 8 mm and over: 5m; sales in linear m
20 mm: special manufacturing in size about 1000x1000 mm on request
Thickness Stock
in mm 1,2 to 4,8 m² >= 6 m² >= 12 m² >= 24 m² (*)
4160003 0,3 30,10 24,04 20,53 18,46 A
4160005 0,5 30,78 24,75 21,17 19,06 A
4160008 0,8 41,60 34,55 29,56 26,61 A
4160010 1 42,85 34,65 30,11 27,10 A
4160015 1,5 54,98 46,33 39,71 35,74 A
4160020 2 68,36 57,10 49,31 44,38 A
4160030 3 99,13 83,05 71,37 64,24 A
4160040 4 124,47 104,85 90,06 81,05 A
4160050 5 156,44 132,10 113,55 102,19 A
4160060 6 189,99 160,78 138,20 124,38 A
4160080 8 MQ=6m² 221,90 191,41 172,27 B
4160100 10 MQ=6m² 269,27 232,28 209,06 B
4160120 12 MQ=6m² 372,63 273,25 245,79 B
4160150 15 MQ=6m² 491,11 360,20 324,10 B
(*) Delivery time : A = in stock, B = about 1 week (from partner stock), C = new production, by agreement
From 8 mm Minimum Quantity = 6 m²
Silicone; 60 +/-5 Shore A; translucent; compliant: FDA §177.2600, BfR XV, EC 1935/2004 ; operating
temperature -60°C to +230 °C
Also available in hardnesses 40 and 50 Shore A on request
Silicone; 60 +/-5 Shore A; red brown; compliant: EC 1935/2004 ; heat resistant; operating temperatures -60 °C
to +230 °C, peaks up to +260 °C
Seals and underlay sheets for chemistry, heating industry, mechanical engineering, manufacturing of engines,
electrical engineering and air-conditioning technology
Quantity in m² €/m²
Quantity in m² €/m²Code n°
Code n°
Page 42 Subject to prior sale Vers. 20|05
Part 3 Sheets and plates
LEZ-SILEXP 15 Silicone foam sheet Technology|Therm. Insul.
Quality
Tolerance ISO DIN 3302.1 E3
Application sealing technology, shock absorption, thermal insulation, heating technics, electrical engineering
Format Sheets: Size 1000x600 mm = 0,6 m²; sales per piece
Thickness Stock
in mm 1 to 2 pieces >= 3 p >= 10 p >= 20 p (*)
4215020 2 71,59 60,77 56,69 55,87 A
4215025 2,5 78,47 66,05 61,43 60,55 A
4215030 3 82,61 68,25 63,85 62,75 A
4215040 4 86,11 71,77 66,49 64,95 A
4215050 5 90,77 76,95 71,11 68,25 A
4215060 6 99,22 80,91 75,19 72,33 A
4215070 7 103,25 84,54 78,60 75,19 A
4215080 8 107,39 87,85 81,57 77,61 A
4215100 10 125,29 105,24 98,30 94,23 A
4215120 12 156,94 131,77 122,52 117,24 A
4215150 15 192,62 161,82 151,48 143,11 A
4215200 20 253,31 212,68 196,50 184,39 A
4215250 25 275,23 233,43 215,68 199,53 A
LEZ-SILEXP 15 Silicone foam roll Technology|Therm.Insul.
Quality
Tolerance ISO DIN 3302.1 E3
Application sealing technology, shock absorption, thermal insulation, heating engineering, electrical engineering
Format Thickness 1,5 to 8 mm: rolls 10 m x 1200 mm; for 8, 10 and 12mm: rolls 5 m x 1200 mm
Sales per linear m: minimum 5 m
Thickness Stock
in mm 6 to 10,8 m² >= 12 m² >= 24 m² >= 48 m² (*)
4215015 R 1,5 82,61 72,28 68,67 65,24 B
4215020 R 2 99,22 85,04 80,79 76,75 B
4215030 R 3 111,29 95,77 90,98 86,44 B
4215040 R 4 115,55 99,74 94,75 90,01 B
4215050 R 5 122,60 106,67 101,34 96,27 B
4215060 R 6 129,31 112,78 107,14 101,78 B
4215080 R 8 137,65 122,36 116,24 110,43 B
4215100 R 10 165,11 147,46 140,08 133,08 B
4215120 R 12 199,62 183,79 174,60 165,87 B
(*) Delivery time : A = in stock, B = about 1 week (from partner stock), C = new production, by agreement
Silicone foam profiles: see page 38
Other hardnesses (e.g. 25 Shore A) see page 44
Quality for food contact FDA compliant: see page 44
Self-adhesive silicone foam rolls to simplify assembly on request
Silicone foam; about 15 +/-5 Shore A; white; density= 0,25; with closed cells and skin on both faces; good
elongation and elastic return; operating temperature -50 °C to +200°C
Code n°Quantity in sheets €/piece
On request: with one self-adhesive face!
Code n°Quantity in m² €/m²
Silicone foam; about 15 +/-5 Shore A; white to light beige; density= 250 kg/m³; with fine-pored closed cells and skin
on both faces; good elongation and elastic return; operating temperature -50 °C to +200 °C
Vers. 20|05 Subject to prior sale Page 43
Part 3 Sheets and plates
LEZ-SILEXP 20R Silicone foam roll Technology|Therm.Insul.
Quality
Tolerance ISO DIN 3302.1 E3
Application sealing technology, shock absorption, thermal insulation, heating technics, electrical engineering
Format Rolls: dimensions 10000 x 1000 mm = 10 m²; sales per m²: minimum 1 m²
Thickness Stock
in mm 1 to 4 m² >= 5 m² a>= 10 m² >= 20 m² (*)
4220020 2 (1 skin) 92,99 73,83 66,46 59,86 B
4220030 3 (1 skin) 114,15 91,75 82,50 74,31 A
4220040 4 166,39 112,12 100,85 90,82 A
4220050 5 143,31 114,72 103,16 92,88 A
4220060 6 156,94 124,84 112,26 101,14 A
4220080 8 183,18 145,21 130,61 117,65 A
4220100 10 210,70 168,18 151,28 136,23 A
4220120 12 (**) 254,77 203,72 183,50 165,13 B
4220150 15 (**) 318,03 254,73 229,30 206,41 B
4220200 20 (**) 429,44 343,87 309,63 278,65 A
LEZ-SILEXP 15PTF Silicone foam roll Food|Pharma|Med
for food contact, compliant with FDA
Quality
Tolerance ISO DIN 3302.1 E3
Application
Format Thickness 2 to 8 mm: rolls 10 m x 1 000 mm; thickness 10 to 12 mm: rolls 5 m x600 mm
Sales per linear m: minimum 1 m
Thickness Stock
in mm 1 to 4 m² >= 5 m² a>= 10 m² >= 20 m² (*)
4625020 2 112,81 96,81 88,14 83,80 A
4625030 3 158,23 136,54 124,26 118,48 A
4625040 4 189,42 163,27 148,82 141,60 A
4625050 5 216,58 186,39 169,77 161,82 A
4625060 6 241,30 208,06 189,28 180,61 A
4625080 8 278,85 241,29 219,62 209,50 A
(*) Delivery time: A = in stock, B = about 1 week (from partner stock), C = new production, by agreement
(**) Size: 1.000x1.000 mm
Code n°
Silicone foam cords and profiles compliant with FDA on request
Silicone foam; 60 +/-5 Shore 00 (about 20 +/-5 Shore A); white; density= 0,3; closed cells, thickness 2 and 3 mm with
skin on one face (with skin on all faces on request), from 4 mm and over, with skin on both faces; good elongation
and elastic return; operating temperature -70 °C up to +200 °C
Code n°
Silicone foam profiles on request
Self-adhesive silicone foam to simplify assembly on request
Silicone foam; about 15 +/-5 Shore A; white; platinum-vulcanized; density= 400 kg/m³; complaint: FDA §177.2600,
BfR XV; fine-pored closed cells, skin on all faces; good elongation and elastic return; operating temperatures -60°C to
+230 °C
sealing technology, shock absorption, thermal insulation, heating technics, electrical engineering, appropriate for
pharmaceutical, medical and food uses
Quantity in m² €/m²
Quantity in m² €/m²
Page 44 Subject to prior sale Vers. 20|05
Part 3 Sheets and plates
LEZ-SIL 60RT/S Silicone sheet glass fabric-reinforced Heating
Quality see Silicone sheets LEZ-SIL 60RT page 42
Tolerance Width and thickness see table
Application see Silicone sheets LEZ-SIL 60RT page 42
Format width 1200 mm, rolls about 10 m; sales per linear meter. Minimum 1 m
Thickness Stock
in mm 1,2 to 4,8 m² >= 6 m² >= 12 m² >= 24 m² (*)
4160015 S 1,5 +/-0,2 101,82 81,27 74,92 69,57 A
4160020 S 2 +/-0,2 122,18 97,00 89,60 83,20 A
4160030 S 3 +/-0,3 162,90 129,77 119,75 111,18 A
4160040 S 4 +/-0,3 216,66 172,58 159,26 147,87 B
4160050 S 5 +/-0,4 C
Special manufacturing on request. Minimum quantity: about 24 m²
LEZ-SAN 65 Santoprene® sheet Food|Pharma|Med
Thermoplastisc Elastomer FDA-compliant
Quality
Tolerance ISO DIN 3302.1 E2
Application
Format thickness from 0,5 to 3,0 mm. width: 300 mm, coil length: 10 m,
from thickness 4 mm: width about 230 mm, coil length: 10 m;
Thickness Stock
in mm 1,5 to 11 m² >= 12 m² >= 24 m² >= 48 m² >= 96 m² (*)
4565005 0,5 25,01 18,75 15,00 13,29 12,33 A
4565010 1 49,97 37,50 29,98 26,57 24,64 A
4565015 1,5 75,04 56,25 44,96 39,85 36,96 A
4565020 2 100,00 75,00 59,97 53,15 49,29 A
4565030 3 150,02 112,51 89,97 79,74 73,95 A
1,5 to 11 m² >= 12 m² >= 24 m² >= 48 m² >= 96 m²
4565040 4 150,02 119,94 106,30 98,57 C
4565050 5 187,51 149,92 132,87 123,21 C
4565060 6 225,01 179,94 159,46 147,90 C
(*) Delivery time: A = in stock, B = about 1 week (from partner stock), C = new production, by agreement
(**) Trademark of ExxonMobil
Code n°
On request
Quantity in m² €/m²
Other thickness and hardnesses on request
Code n°Quantity in m² €/m²
Die-cut gaskets and glued or welded parts on request
Silicone insert fibreglass fabric fine fabric impression; 60+/-5 Shore A; reddish brown; no talc; fully post-cured;
operating temperature -60 °C to +230 °C, peaks to +250 °C
TPE of Santoprene® (**); from type PP-EPDM; 65 +/-5 Shore A; light beige; density= 0,97; compliant: FDA
§177.2600, NSF 51; very good chemical resistance to aqueous media, acids, bases and a many of organic solvents,
such as alcohol, glycol, ketones, aldehydes, esters, ethers; does not resist to hydrocarbons, fuels, oils and oil-based
hydraulic fluids; good resistance to ozone and UV rays; excellentresistance to aging; particularly dimensionally stable
and resistant to bending; good compression set: 186h/25°C = 23%; operating temperature -45 °C to +135 ° C, peaks
up to 150 ° C.
Can be easily welded to itself by heating
The material LEZ-SAN is recyclable
Seals in pharmacy, medicine, chemistry, biology, filling technology, the beverage industry, wine tanks, fermenters,
containers and tanks construction for food, pharmaceuticals and cosmetics, machinery and equipment, household
appliances
Vers. 20|05 Subject to prior sale Page 43
Part 3 Sheets and plates
LEZ-VIT 75 Viton® sheet and plate Chemistry|Technology
Quality
Tolerance thickness according to ISO DIN 3302.1 ST2
Application
Format width: 1000 mm. Length: 0,5 to 6 mm: rolls about 10 m; 8 and 10 mm: plate about 1000x2000 mm
Sales per linear m: minimum 1 m
Thickness Stock
in mm 1 to 4 m² >= 5 m² >= 10 m² >= 20 m² (*)
4375005 0,5 92,49 75,38 68,25 64,75 A
4375008 0,8 132,50 108,04 97,82 92,80 B
4375010 1 144,81 118,07 106,90 101,42 A
4375015 1,5 209,45 170,76 154,61 146,68 A
4375020 2 260,64 213,45 193,26 183,35 A
4375030 3 377,65 309,29 280,03 265,67 A
4375040 4 520,20 426,90 386,52 366,69 A
4375050 5 623,82 512,28 463,82 440,03 A
4375060 6 737,43 617,66 559,23 530,55 A
4375080 8 1080,52 936,86 872,38 827,65 B
4375100 10 1275,45 1099,41 1027,07 974,40 B
LEZ-VITEC 75 Viton® sheet and plate Chemistry|Technology
Quality
Tolerance thickness according to ISO DIN 3302.1 ST2
Application
Format width 1200 mm. Length: 0,5 to 6 mm: rolls about 10 m ; >= 8 mm rolls about 5 m
Sales per linear m: minimum 1 m
Thickness Stock
in mm 1,2 to 10,8 m2
>= 12 m2
>= 24 m2
>= 48 m2 (*)
4374005 0,5 54,64 43,90 40,53 37,65 A
4374010 1 93,58 77,29 71,34 66,25 A
4374015 1,5 139,26 115,93 107,02 99,37 A
4374020 2 186,02 154,58 142,69 132,50 A
4374030 3 278,51 231,89 214,05 198,76 A
4374040 4 372,04 309,18 285,40 265,01 A
4374050 5 464,53 386,47 356,74 331,26 B
4374060 6 556,97 463,76 428,08 397,51 B
4374080 8 742,99 618,34 570,77 530,00 B
4374100 10 929,01 772,94 713,48 662,52 B
4374120 12 C
(*) Delivery time : A = in stock, B = about 1 week (from partner stock), C = new production, by agreement
(**) Trademark of Dupont Performance Elastomers
Quantity in m² €/m²
2 m x 1 m on request
Fluoroelastomer 75 +/-5 Shore A; black; for general purposes; good resistance against aliphatic, aromatic and
halogen-substituted hydrocarbons, alcohols, glycols, fuels, oils and hydraulic liquids; flame-resistant; operating
temperature -20 °C to +185 °C; +200 °C (5000h)
Code n°
Code n°
stamped gaskets or underlay sheets for chemistry, petrochemistry, mechanical engineering, pump construction,
automotive, aerospace and shipbuilding, construction of heating devices, oil industry, coal-fired, thermal, hydro
and nuclear power plants
Fluoroelastomer Viton®(**); 75 +/-5 Shore A; black; first quality; compliant: UL94V0; good resistance against
aliphatic, aromatic and halogen-substituted hydrocarbons, alcohols, glycols, fuels and hydraulic fluids; flame-
resistant; operating temperature -10 °C to + 250 °C; peaks up to + 300°C
Quality in genuine Viton, 65 Shore A, FDA-compliant, colour white on request
Qualities compliant with KTW or UL94 -V0 on request
Other hardnesses (60 Sh A) or thicknesses (special production) on request
Quantity in m² €/m²
stamped gaskets or underlay sheets for chemistry, petrochemistry, mechanical engineering, pump construction,
automotive, aerospace and shipbuilding, construction of heating devices, oil industry, coal-fired, thermal, hydro
and nuclear power plants
Thickness 12, 15 und 20 mm: special manufacturing (in size about 1000x1000 mm ) on request
Page 46 Subject to prior sale Vers. 20|05
Part 3 Sheets and plates
LEZ-VITCHEM 70GF Viton® sheet
Quality
Tolerance ISO DIN 3302.1 ST3/SW3
Application
Format 500 mm x 500 mm up to 4 mm.
Thickness Stock
in mm 1-19 pieces >= 20 pieces >= 40 pieces >= 80 pieces (*)
4370010 GF 1 65,56 59,01 56,06 53,25 A
4370015 GF 1,5 91,77 82,36 78,25 74,33 A
4370020 GF 2 112,56 101,05 96,00 91,20 A
4370030 GF 3 146,40 135,91 129,32 123,05 A
4370040 GF 4 180,30 170,77 162,64 154,89 C
LEZ-VIT 75/S Viton® sheet glass fabric-reinforced Chemistry|Heating
Quality see Viton® (**) sheets LEZ-VIT 75 page 46
Viton® (**) insert fibreglass fabric; 75 +/-5 Shore A; black; operating temperature -20 °C to +200 °C
Tolerance Width and thickness see table
Application see Viton sheets LEZ-VIT 75 page 46
Dimensions width 1000 mm, rolls about 10 m; sales per linear m: minimum quantity 1 m.
Thickness Stock
in mm 1 to 4 m² >= 5 m² >= 10 m² >= 20 m² (*)
4375015 S 1,5 +/- 0,2 203,90 C
4375020 S 2,0 +/- 0,3 243,27 C
4375030 S 3,0 +/- 0,3 335,98 C
LEZ-VIT 75/N Viton® sheet nomex-reinforced Chemistry|Heating
Quality see Viton® (**) sheets LEZ-VIT 75 page 46
Viton® (**) insert nomex fabric; 75 +/-5 Shore A; black; operating temperature -15 °C to +200 °C
Tolerance Width and thickness see table
Application see Viton sheets LEZ-VIT 75 page 46
Dimensions width: 1,2 mm:1000 mm; from 1,5 mm: 1200 mm; rolls about 10 m; sales per linear m
Thickness Stock
in mm 1 to 4 m² >= 5 m² >= 10 m² >= 20 m² (*)
4375012 S 1,2 +/- 0,2 268,76 218,77 199,11 178,21 A
Minimum quantity >= 6 m² >= 12 m² >= 24 m²
4375015 N 1,5 +/- 0,2 6 m² 278,03 248,12 230,40 B
4375020 N 2,0 +/- 0,3 6 m² 370,74 325,34 301,92 B
4375030 N 3,0 +/- 0,3 6 m² 556,06 487,38 452,57 B
(*) Delivery time: A = in stock, B = about 1 week (from partner stock), C = new production, by agreement
(**) Trademark of Dupont Performance Elastomers
Quantity in m² €/m²
On order
Quantity in m² €/m²
On order
Code n°
Code n°
On order
White other 60 Shore A on request
100 % Fluoroelastomer made of a special Viton® (**) type GF with high fluorine-content; 70 +/-5 Shore A; black;
compliant: FDA §177.2600, 2002/95/EC, 2011/65/EC, UL94V0; very good resistance against aliphatic,
aromatic and haloge- substituted, hydrocarbons, gasoline, biodiesel, oils, glycols, cooling agents and hydraulic
fluids; particularly impermeable to gas; operating temperature -8 °C to +200 °C, peaks to +300 °C
Special manufacturing on request. Minimum quantity: about 20 m²
Chemistry|Petrochemistry
Pharma|Cosm|Food
laboratory, chemistry, petrochemistry, mechanical engineering, oil and fuel lines, hydraulics, manufacture of
reservoirs, tanks and containers, fuel lines for automobile-, ship- and aviation industry, pharmaceutical-,
cosmetics- and food prodcution, paste-like and oleaginous liquids
Code n°Quantity in sheets €/piece
Vers. 20|05 Subject to prior sale Page 47
Part 3 Sheets and plates
LEZ-VITMOOS P10 Viton® sponge plate Chemistry|Therm.Insul.
Plate material
Quality
Tolerance see table
Application
Thickness Format Stock
in mm mm 1-2 p >= 3 p >= 5 p >= 10 p (*)
4410032 1/8": 3,2 +/-0,5 710 x 1420 780,19 711,37 654,00 608,10 B
4410064 1/4": 6,4 +/-0,6 760 x 1420 1204,76 1143,92 1075,08 1009,68 B
1 p 2 p 3 p 4 p
4410095 3/8": 9,5 +/-0,8 760 x 1420 1721,05 1657,94 1612,05 1589,10 C
4410127 1/2":12,7+/-1,25 760 x 1420 2294,73 2238,51 2192,61 2157,04 C
LEZ-VITSILEXP 7515 Viton®/Siliconefoam sheetPlate material
Quality
Tolerances LEZ-SILEXP 15: ISO DIN 3302.1 E3; LEZ VIT 75: ISO DIN 3302.1 ST2
Application
Format Silicone foam thickness 3 mm, Viton® sheet thickness 1 mm
Thickness Format Stock
in mm mm 1 to 9 m² >= 10 m² >= 30 m² >= 50 m² (*)
4393010 3,0 / 1,0 1.000x1.000 334,17 283,14 255,19 229,67 A
(*) Delivery time A = in stock, B = about 1 week (from partner stock), C = new production, by agreement
(**) Trademark of Dupont Performance Elastomers
Pressed plates; rubber sponge of 100 % Viton® (**); about. 10-15 Shore A; density= 0,2 to 0,3 depending on the
thickness; black; with closed cells, both faces with skin; very good compression set; chemical resistance see LEZ-
VITMOOS E20; operating temperatur from -25 °C to +200 °C
Code n°
Chemistry|Technology
Thermal Insulation
Code n°
Quantity in units €/piece
Quantity in units €/m²
seals for laboratory devices, chemical and paint plants, oil industry, chemicals and fuel tanks, incinerators, furnaces,
electrical engineering
Silicone foam sheet LEZ-SILEXP 15 with Viton® (**) sheet LEZ-VIT 75
Silicone foam sheet; about. 15 Shore A; white; Viton® (**) sheet; 75 +/-5 Shore A; black
very good thermal and insulation properties; operating temperature -15 °C to +180 °C
thermal insulation of stainless steel chimneys, in heating and air conditioning, seals for chemical containers, tanks in
the petrochemical industry, compensation seals in the steel, metal and aluminiuml industry, seals for laboratory
equipment, mechanical engineering
Page 48 Subject to prior sale Vers. 20|05
Part 3 Sheets and plates
LEZ-BUFLON Butyl/PTFE plate Lab|Pharma|Med
RollQuality
Tolerances Thickness butyl-plate +/-0,3 mm, PTFE-Film +/-0,01 mm
Application Septa for chromatography and sample collection in analytics; membranes, seals, underlays and
conveyor belts for pharmaceutical, medical, chemical, food industry
Format width: 600 mm ; roll length: 10 m , not trimmed lateraly;
Sales per linear m: minimum quantity 1 m
Stock
1 to 9 m >= 10 m >= 20 m (*)
4711002 1,0 / 0,2 one side flat 107,26 93,61 84,25 A
4711402 1,4 / 0,2 one side fabric finish 130,22 113,64 102,28 A
4711802 1,8 / 0,2 one side fabric finish 145,24 126,76 114,08 A
4713001 3,0 / 0,1 one side fabric finish 160,62 140,23 126,21 A
4713002 3,0 / 0,2 one side fabric finish 166,93 145,70 131,13 A
4722001 2,0 / 0,1 both sides - 162,90 142,05 127,85 B
LEZ-SILFLON Silicone/PTFE plate Lab|Pharma|Med
RollQuality
Tolerances thickness silicone plate +/- 0,3 mm, PTFE-film +/-0,01 mm
Application
Format width: 1200 mm ; roll length: 10 m, not trimmed laterally
sales per linear m: minimum quantity 1 m
Stock
1 to 9 m >= 10 m >= 20 m (*)
4811001 1,0 / 0,1 one side flat 414,88 360,63 324,57 A
4811301 1,3 / 0,1 one side flat 461,56 402,26 362,04 A
4813001 3,0 / 0,1 one side flat 812,52 708,68 637,82 A
PlateQuality Silicone; 45 +/-5 Shore A; transparent; one side vulcanized with PTFE film light beige
Tolerances total thickness +/-0,2 mm PTFE-film +/-0,02 mm
Format 305 x 610 mm, about 0,18 m²
Stock
1 to 9 pieces >= 10 pieces >= 50 pieces (*)
4811902 1,9 / 0,25 flat 172,45 150,37 135,33 A
(*) Delivery time: A = in stock, B = about 1 week (from partner stock), C = new production, by agreement
Silicone plate; 45 +/-5 Shore A; pure white; compliant: FDA 21CFR §177.2600, BfR XV; one side vulcanized with
PTFE film; red; compliant: FDA 21 §177.1550, BfR LI, 2.1.1.1. ; according to 2002/72/EU, the following restriction
applies to the monomers (TFE), used for the production of PTFE: TFE/SML = 0.05 mg/kg. The material applies to DAB /
EAB 2008, chap. 3.2.9.; the mixture is free of phthalates and complies with REACH 1907/2006 in the current edition.;
operating temperature -60 °C to +220 °C
Butyl plate; 50 +/-10 Shore A; red; compliant: EAB/DAB 2014, 8.Cap.3.2.9,Typ 2, BfR XXI; the Mixture is free of
phthalates and complies with REACH 1907/2006 in the current edition; with one or both sides vulcanized with PTFE
film; grey; compliant: BfR LI, 2.1.1.1., FDA 21 § 177.1550 ; according to 2002/72/EU, its extensions and
10/2011/EU the following restriction applies to the monomers (TFE), used for production of PTFE: TFE/SML = 0.05
mg/kg; operating temperature -30 °C to +100 °C
Code n°
Quantity in units €/piece
Code n°
Code n°
Thickness
Silicone/PTFE in
mm
Back finish
Quantity in meters €/mThickness
Butyl/PTFE in
mm
Back finish
Thickness
Silicone/PTFE in
mm
Back finishQuantity in meters €/m
Septa for chromatography and sample collection in analytics; membranes, seals, underlays and conveyor belts for
pharmaceutical, medical, chemical, food and frozen food industry
Vers. 20|05 Subject to prior sale Page 49
Part 3 Sheets and plates
LEZ-FLON PTFE plate, sheet and rod Lab|Chemistry|Food|Pharma|Med
Quality
Tolerance ISO DIN 3302.1 E2
Application seals and turned parts for laboratory, chemical, pharmaceutical and medical, thermal insulation,
filling technologies, mechanical engineering and chemical plants
1|2|3| 4|5|6|8|10|12|15|20|25|30|40|100
(*) Delivery time: with * marked dimensions: A = in stock, immediately available
Other dimensions: B=about 1 week (from partner stock)
>= 5 kg >= 10 kg >= 20 kg >= 30 kg >= 50 kg >= 75 kg >= 100kgm
36,99 30,60 27,81 25,29 23,75 22,56 21,43
Example 1 Plate Format 1.500x1.500 mm and thickness 3,0 mm Code No = 16PC0030
Example 2 Sheet Format 10 m x 1.000 mm and thickness 1,0 mm Code No = 16FB0010
Example 3 Rod of length 1.000 mm and diameter 80 mm Code No = 16RA0800
Basis for weight calculation
Plate Format 1.000 x 1.000 mm and thickness 1 mm P = 2,2 kg
Sheet Format 10 m x 1.000 mm and thickness 0,1 mm P = 2,2 kg
Rod P en kg = Density x L en mm x S en mm²/1.000.000
Example: rod L=1.000 mm and diameter D=50 mm:
P in kg = 2,2 x 1.000 mm x (3,14x50x50/4) mm²/1.000.000 = 4,317 kg
Forms of delivery
See also table to calculate weight on next page
16PA…
16PB…
16PC…
16PD…
16RA…
16PE…
16FA…
16FB…
16FC…0,1 | 0,5 | 1,0 | 1,5
Code n°Quantity in kg €/kg
Plates
0,15 | 0,2 | 0,5
Stock
(*)
100 | 120 | 130 | 140 | 150 | 160 | 180 | 200
250 | 300
16RB…
16RC…
4 | 5 | 6 | 8 | 9 | 10 | 12 | 15 | 16 | 18 | 20 | 25 | 30
| 35 | 40 | 45 | 50 | 55 | 60 | 65 | 70 | 75 | 80 | 85 |
90 | 95 | 99 | 100 | 105 | 110 | 115 | 120
PTFE LEZ-FLON is a fluored thermoplastic, hardness: 55 +/-5 Shore D; density= 2,2, virginal, compliant: FDA 21 CFR
177.1550, UL94 V0; excellent chemical resistance; operating temperature: -200 up to +260 °C; no water
absorption, not flammable (Fire class V0 according to UL94); Good resistance to pressure; excellent lubricating
properties and nonstick, good electrical and dielectric properties.
1.000x1.000 mm
1.200x1.200 mm
1.500x1.500 mm
600x600 mm
Format Thickness or diametrer in mm
0,5 | 1 | 1,5 | 2 | 3 | 4 | 5 | 6 | 8 | 10 | 12 | 15 | 20 |
25 | 30 | 35 | 40 | 50 | 60 | 70
1 | 2 | 3 | 4 | 5 | 6
25 | 30 | 35 | 40 | 50 | 60
2 | 3 | 4 | 5 | 6 | 8 | 10 | 12 | 15 | 20 | 25 | 30 |
35 | 40 | 50
Group no + letter
for code n°
1.000x2.000 mm
Examples
Thickness 0,1 mm = 0001 / Thickness 1 mm = 0010 / Diameter 100 mm = 1000
Density = 2,2; 1 dcm³=2,2 kg ou 1 cm³=1.000 mm³= 2,2 g
Examples
Rouleau 10 m x 1.200 mm
Longueur 1.000 mm
Longueur 300 mm
See below
Building of the code No Group 16 + letter for code No + thickness or diameter in 1/10 th mm
Rods
Sheets 0,1* | 0,15* | 0,2* | 0,25* | 0,3* | 0,5* | 1,0* | 1,5*
Longueur 2.000 mm
Rouleau 10 m x 600 mm
Rouleau 10 m x 1.000 mm
Page 50 Subject to prior sale Vers. 20|05
Weight Table
Format mm Thickness mm 0,5 1 1,5 2 3 4 5 6 8 10 12 15 20 25 30 35 40 50 60 70 100
1.000 x 1.000 Weight kg 2,200 3,300 4,400 6,600 8,800 11,000 13,200 17,600 22,000 26,400 33,000 44,000 55,000 66,000 88,000 220,000
1.200 x 1.200 Weight kg 1,584 3,168 4,752 6,336 9,504 12,672 15,840 19,008 25,344 31,680 38,016 47,520 63,360 79,200 95,040 110,880 126,720 158,400 190,080 221,760
1500 x 1500 Weight kg 4,950 9,900 14,850 19,800 24,750 29,700
600 x 600 Weight kg 19,800 23,760 27,720 31,680 39,600 47,520
Format mm Thickness mm 0,1 0,15 0,2 0,25 0,3 0,4 0,5 1 1,5
10.000 x 600 Weight kg 1,980 2,640 6,600
10.000 x 1.000 Weight kg 2,200 3,300 4,400 5,500 6,600 11,000 22,000 33,000
10.000 x 1.200 Weight kg 2,640 13,200 26,400 39,600
Length mm Ø mm 4 5 6 8 9 10 12 15 16 18 20 25 30 35 40 45 50 55 60 65
2.000 mm Weight kg 0,055 0,086 0,124 0,221 0,280 0,345 0,497 0,777 0,884 1,119 1,382 2,159 3,109 4,231 5,526 6,994 8,635 10,448 12,434 14,593
Ø mm 70 75 80 85 90 95 99 100 105 110 115 120 130 140 150 160 180 200 250 300
1.000 mm Weight kg 17,270 24,869 29,186 33,849 38,858 44,211 55,955
2.000 mm Weight kg 16,925 19,429 22,106 24,955 27,977 31,172 33,853 34,540 38,080 41,793 45,679 49,738
300 mm Weight kg 32,381 46,629
Pa
rt 3 S
he
ets a
nd
pla
tes
Ve
rs. 20
|0
5P
ag
e 5
1
LEZ-FLON PTFE sheets, plates and rods P
late
sS
he
ets
R
od
s
Part 4 Rubber stoppers
LEZ-GOM Series F Rubber stoppers Food|Pharma|Med
ISO DIN 3302.1 M4
laboratory, oenology, beverage and food industry, sealing technology for containers
according to use and requirements it is possible to order small or large packages
Dimensions
in mm
Dlow*Dup*H
5204008 F8 4*8*20 100 | 500 10,18 8,62 9,19 7,22 8,73 6,49
5205008 F8n 5*8*13 100 | 500 11,46 9,53 10,46 8,23 9,71 7,34
5206010 F10 6*10*20 100 | 500 12,75 10,71 11,12 8,74 10,88 7,93
5208011 F11n 8*11*13 100 | 500 10,82 9,00 9,89 7,77 9,34 6,86
5209013 F13 9*13*20 100 | 500 14,73 12,26 13,34 10,48 12,78 9,27
5211015 F15 11*15*20 100 | 500 17,89 15,00 15,94 12,53 15,55 11,21
5213016 F16 13*16*20 40 | 200 21,80 18,16 19,41 15,26 18,81 13,87
5212017 F17h 12*17*25 40 | 200 34,28 28,60 30,73 24,16 29,50 21,49
5214018 F18 14*18*20 40 | 200 22,17 18,53 19,94 15,68 19,42 14,09
5216021 F21 16*21*25 20 | 100 32,14 26,78 28,88 22,70 27,66 20,37
5217023 F23h 17*23*30 20 | 100 49,11 40,97 44,23 34,78 40,69 31,17
5219024 F24 19*24*25 20 | 100 38,13 31,87 33,46 26,30 32,94 23,65
5222027 F27 22*27*25 20 | 100 50,03 41,72 44,88 35,28 43,14 31,60
5222030 F30h 22*30*40 10 | 50 111,99 93,19 100,25 78,81 95,88 70,82
5225031 F31 25*31*30 10 | 50 73,86 61,65 65,27 51,31 63,55 46,67
5228034 F34 28*34*30 10 | 50 84,63 70,59 76,09 59,82 72,52 53,54
5226035 F35h 26*35*42 10 | 50 178,73 148,63 159,91 125,72 152,42 112,42
5231038 F38 31*38*35 10 | 50 124,53 103,64 112,19 88,20 106,33 79,45
5234041 F41 34*41*35 10 | 50 151,31 125,97 134,03 105,37 128,20 94,88
5238045 F45 38*45*35 5 | 25 172,78 144,08 154,97 121,83 147,50 109,47
5242049 F49 42*49*35 5 | 25 212,10 176,37 190,61 149,85 181,92 135,03
5246054 F54 46*54*35 5 | 25 293,13 244,07 264,83 208,20 250,76 187,06
5250060 F60 50*60*45 4 | 20 425,37 353,87 384,56 302,33 362,61 274,24
5255065 F65 55*65*45 4 | 20 664,95 554,35 611,82 480,99 577,72 436,10
5263073 F73 63*73*50 2 | 10 745,98 621,99 671,30 527,75 647,78 473,62
5266078 F78 66*78*50 2 | 10 1115,39 929,43 1006,62 791,37 958,77 715,46
5272085 F85 72*85*50 2 | 10 1447,78 1205,90 1316,65 1035,10 1253,78 921,39
5270090 F90n 70*90*45 2 | 10 930,66 774,53 833,50 655,27 798,97 597,58
5278092 F92 78*92*50 2 | 10 1101,03 917,53 981,20 771,39 946,48 696,16
5285095 F95 85*95*50 2 | 10 1395,40 1163,00 1258,92 989,72 1204,61 891,09
5295105 F105 95*105*50 2 | 10 1538,40 1280,99 1389,59 1092,44 1339,82 982,98
5295125 F125h 95*125*80 1 | 5 6917,27 5764,99 6287,07 4942,67 6023,04 4484,72
5299125 F125 105*125*50 1 | 5 4730,69 3943,03 4254,91 3345,05 4154,67 3006,28
Special dimensions on request
5203004 F4 3*4*8 7,29 6,08
5209025 F14 9*14*25 15,48 13,13
5213020 F20 13*20*35 36,31 30,43
5227035 F35h 27*35*40 109,64 90,58
5230040 F40 30*40*50 245,52 204,94
5235045 F45 s 35*45*35 225,17 187,07
5240050 F50 40*50*35 249,00 208,53
5240051 F50h 40*50*50 319,38 266,90
5299140 F140 109*140*80 8019,49 6682,52
*Delivery time dimension standards: on stock; without boring: approx. 1 week; special dimension: on request
MQ=300 pieces from 600 units
MQ=250 pièces from 500 units
MO=10 pièces from 20 units
from 1.200 units
MQ=300 pieces from 600 units
MQ=300 pieces from 600 units
Quality
MQ=10.000 pieces from 20.000 units
MQ= 5.000 pieces from 10.000 units
Natural rubber; 40 +/-5 Shore A; grey; compliant: BfR XXI; for food contact; operating temperature -40 °C to +80
°C
Other special dimensions on request
Boring of different diameters (from 2 to 18 and 21, 23 and 25 mm) possible. Additional charge: 0,30 €/boring
All dimensions are quickly available from stock
Tolerance
Application
Sales units
Price €/100 pieces
up to 4 PU
small|large
>= 5 PU
small|large
>= 10 PU
small|large
Packaging
unit=PU
small|large
Code n° Size
MQ=2.000 pieces from 4.000 units
MQ=600 pieces
Page 52 Subject to prior sale Vers. 20|05
Part 4 Rubber stoppers
LEZ-GOM Series D Rubber stoppers Lab|Industry
DIN 12871
laboratory, industry, stopping technology, sealing technology for containers
according to your application or your requirements you can order small or large packaging
Dimensions
in mm
Dinf*Dsup*H
5003006 D 6 3*6*15 100 | 500 9,77 7,28 8,51 6,39 7,44 5,54 -
5004008 D 8 4*8*20 100 | 500 11,09 8,45 9,50 7,41 7,87 6,12 -
5005009 D 9 5*9*20 100 | 500 11,51 8,82 9,85 7,75 8,67 6,76 -
5008012 D 12 8*12*20 100 | 500 15,04 11,61 13,00 10,20 11,88 9,02 -
5010014 D 14 10*14*20 100 | 500 15,73 12,30 13,59 10,77 12,60 9,45 1 x 3
5012016 D 16 12*16*20 40 | 200 17,84 14,36 15,81 12,48 14,64 11,07 1 x 3
5014018 D 18 14*18*20 40 | 200 21,48 16,68 18,49 14,62 17,16 12,80 1|2 x 3
5017022 D 22 17*22*25 20 | 100 35,79 28,45 31,48 24,79 28,79 22,45 1|2 x 4
5018024 D 24 18*24*30 20 | 100 41,54 33,26 36,87 29,02 33,83 26,09 1|2 x 4
5021027 D 27 21*27*30 20 | 100 58,70 45,82 50,88 40,03 46,49 36,27 1|2 x 5
5023029 D 29 23*29*30 20 | 100 80,45 63,45 70,35 55,36 64,18 49,36 1|2 x 5
5026032 D 32 26*32*30 20 | 100 94,54 74,01 82,24 64,67 74,92 57,81 1|2 x 6
5029035 D 35 29*35*30 20 | 100 117,19 92,17 102,23 80,44 93,46 71,76 1|2 x 6
5031038 D 38 31*38*35 10 | 50 154,88 120,99 133,99 105,43 122,13 94,89 1|2 x 7
5034041 D 41 34*41*35 10 | 50 185,71 145,06 160,66 126,41 146,59 113,67 -
5036044 D 44 36*44*40 10 | 50 192,25 150,34 166,90 131,33 151,76 118,22 -
5041049 D 49 41*49*40 5 | 25 261,09 204,97 226,98 178,60 206,35 160,31 -
5047055 D 55 47*55*40 5 | 25 351,46 274,81 305,75 240,58 277,13 216,49 -
5051060 D 60 51*60*45 5 | 25 451,81 353,52 392,67 308,98 356,31 278,08 -
5056065 D 65 56*65*45 5 | 25 603,89 474,45 524,78 412,93 477,48 344,80 -
5060070 D 70 60*70*50 5 | 25 714,37 568,42 629,89 495,64 573,46 445,43 -
5064075 D 75 64*75*55 5 | 25 788,96 650,60 707,65 556,82 644,24 501,13 -
5071083 D 83 71*83*60 2 | 10 918,03 762,25 844,31 664,35 767,81 597,81 -
5079092 D 92 79*92*65 2 | 10 1262,52 1065,20 1179,01 927,74 1072,53 835,49 -
5087100 D 100 87*100*65 1 | 5 1477,42 1260,14 1394,00 1096,88 1268,08 1014,91 -
5094107 D 107 94*107*65 1 | 5 1763,95 1509,14 1668,02 1312,64 1517,62 1176,36 -
5099130 D 130 100*130*85 1 | 3 4173,85 3786,29 3968,61 3399,95 3839,04 3059,95 -
5099170 D 170 120*170*130 1 | 3 12236,20 11117,05 11682,04 10006,17 11217,21 9204,24 -
5099220 D 220 160*220*160 1
5099260 D260 200*260*160(**) 1
(*) Standard borings without additional charge; special borings: on request
(**) with hollow space
On request, MQ=10 pieces
On request, MQ=10 pieces
Delivery time:
Different colour (NR red)|NBR-quality (oil resistant) on request
Code n° Size>= 5 PU
small|large
>= 10 PU
small|large
Standard
boring
Nber x Ø
in mm
(*)
without boring: quickly from stock; standard boring: about 1 week (from partner stock); special boring: on request
Quality
Tolerance
Application
Packaging units
up to 4 PU
small|large
Packing
unit = PU
pieces
small|large
Price €/100 pieces
Natural rubber; 45 +/-5 Shore A; grey; low in sulphur; non-toxic; operating temperature -35 °C to +60 °C in hot air; up
to +120 °C in damp heat
Vers. 20|05 Subject to prior sale Page 53
Part 4 Rubber stoppers
LEZ-SIL Series D Silicone stoppers Food|Pharma|Med
DIN 12871
according to your application or your requirements you can order small or large packaging
Dimensions
in mm
Dinf*Dsup*H
5103006 D 6 3*6*15 100 | 500 14,90 13,63 14,34 11,59 13,80 9,84 -
5104008 D 8 4*8*20 100 | 500 15,14 13,92 14,69 11,84 14,07 10,01 -
5105009 D 9 5*9*20 100 | 500 15,37 14,15 14,76 12,01 14,22 9,99 -
5108012 D 12 8*12*20 100 | 500 19,06 17,27 18,31 15,03 17,58 13,53 -
5110014 D 14 10*14*20 100 | 500 22,13 20,10 21,19 17,46 20,34 15,78 1 x 3
5112016 D 16 12*16*20 40 | 200 26,52 24,26 25,50 21,03 24,54 18,77 1 x 3
5114018 D 18 14*18*20 40 | 200 33,91 30,91 32,63 27,03 31,36 23,73 1|2 x 3
5117022 D 22 17*22*25 20 | 100 53,90 49,05 51,87 42,92 49,80 38,60 1|2 x 4
5118024 D 24 18*24*30 20 | 100 72,91 66,38 70,16 57,36 67,37 50,47 1|2 x 4
5121027 D 27 21*27*30 20 | 100 91,62 83,42 88,10 73,66 84,67 65,93 1|2 x 5
5123029 D 29 23*29*30 20 | 100 123,05 112,82 118,74 99,58 114,44 90,14 1|2 x 5
5126032 D 32 26*32*30 20 | 100 144,48 132,81 139,68 118,15 134,88 105,74 1|2 x 6
5129035 D 35 29*35*30 20 | 100 183,02 168,28 176,99 147,19 170,88 133,07 1|2 x 6
5131038 D 38 31*38*35 10 | 50 244,71 224,09 236,01 194,42 227,39 175,90 1|2 x 7
5134041 D 41 34*41*35 10 | 50 332,29 304,16 320,53 291,40 308,80 278,94 -
5136044 D 44 36*44*40 10 | 50 353,21 322,93 340,50 306,54 327,69 294,78 -
5141049 D 49 41*49*40 5 | 25 443,38 406,18 427,90 357,62 412,35 322,87 -
5147055 D 55 47*55*40 5 | 25 587,87 537,43 566,80 470,07 545,66 420,34 -
5151060 D 60 51*60*45 5 | 25 786,54 717,79 757,82 630,85 728,88 567,58 -
5156065 D 65 56*65*45 5 | 25 1015,48 927,15 978,25 805,36 940,86 723,64 -
5160070 D 70 60*70*50 5 | 25 1559,21 1546,56 1500,51 1245,96 1441,79 1122,16 -
5164075 D 75 64*75*55 5 | 25 1670,13 1522,59 1608,12 1338,10 1545,76 1210,61 -
5171083 D 83 71*83*60 2 | 10 2134,37 1945,17 2054,50 1698,01 1974,67 1552,35 -
5179092 D 92 79*92*65 2 | 10 2932,93 2671,80 2822,39 2327,42 2712,25 2114,85 -
5187100 D 100 87*100*65 1 | 5 4098,49 3814,67 3985,41 3361,70 3872,40 3062,65 -
5194107 D 107 94*107*65 1 | 5 5621,14 5252,74 5476,75 4654,87 5331,61 4315,34 -
5199130 D 130 100*130*85 1 | 3 -
5199170 D 170 120*170*130 1 | 3 -
5199220 D 220 160*220*160 1
5199260 D260 200*260*160(**) 1
(*) Standard borings without additional charge; special borings: price on request
(**) with hollow space
On request, MQ=10 pieces
On request, MQ=10 pieces
Delivery time: 1) without boring: from stock. 2) standard boring: from partner stock: about 1 week 3) special boring: according
to prior agreement
Packaging units
On request, MQ=10 pieces
On request, MQ=10 pieces
Silicone; 50 +/-5 Shore A; translucent; compliant: FDA §177.2600, BfR XV; chemically and biologically neutral;
for food contact; operating temperature -60 °C to +200 °C, peaks up to +230 °C
Size
Quality
Tolerance
Application
Packing
unit=PU
pieces
small|largeup to 4 PU
small|large
>= 5 PU
small|large
>= 10 PU
small|large
Standard
boring
Nber x Ø
in mm
(*)
laboratory, biology, oenology, beverage, dairy and food industries, glass industry, galvanization techniques,
stopping and sealing technologies for containers
Code n°
Price €/100 pieces
Page 54 Subject to prior sale Vers. 20|05
Part 4 Rubber stoppers
LEZ-SIL Series P Silicone stoppers Food|Pharma|Biology
ISO DIN 3302.1 M4
according to your application or your requirements you can order small or large packaging Dimensions
in mmStock
Dinf*Dsup*H (*)
5320023 P23 20*23*24 20 | 100 149,46 124,02 138,86 127,20 111,30 99,64 A
5322025 P25 22*25*27 20 | 100 165,36 136,74 152,64 121,90 138,86 108,12 A
5324029 P29 24*29*30 20 | 100 239,22 198,71 222,05 178,44 203,85 159,82 A
5325031 P31 25*31*34 20 | 100 267,42 220,79 246,58 197,06 225,38 176,89 A
5328033 P33 28*33*34 20 | 100 287,02 239,22 265,92 214,13 244,04 192,40 A
5330035 P35 30*35*38 20 | 100 320,23 265,00 295,82 237,45 271,32 213,09 A
5332038 P38 32*38*38 20 | 100 354,50 293,20 327,70 263,32 300,03 235,92 A
5335042 P42 35*42*40 10 | 50 399,94 331,24 369,60 298,33 338,79 267,89 A
5337045 P45 37*45*42 10 | 50 446,52 369,27 412,13 331,82 377,55 298,33 A
5342049 P49 42*49*45 10 | 50 574,10 475,96 530,49 427,71 486,65 385,09 A
5345055 P55 45*55*48 10 | 50 678,43 565,51 628,27 508,38 577,09 462,72 A
5351060 P60 51*60*51 10 | 50 917,64 765,51 849,69 687,99 780,93 619,49 A
5356066 P66 56*66*55 10 | 50 1159,28 967,93 1073,79 870,64 987,65 783,88 A
LEZ-VIT Series T Viton® stoppers Lab|Chemistry|Industry
ISO DIN 3302.1 M4
laboratory, chemistry, automobile industry, sealing and stopping technologies, galvanization
according to your application or your requirements you can order small or large packaging Dimensions
in mmStock
Dinf*Dsup*H (**)
5403007 T 7 3*7*19 10 | 50 83,53 69,06 77,08 62,67 70,41 55,14 A
5406010 T 10 6*10*17 10 | 50 211,67 177,11 196,54 159,07 181,27 139,40 A
5409012 T 12 9*12*19 10 | 50 229,48 193,85 214,05 173,68 197,66 152,30 A
5410014 T 14 10*14*19 10 | 50 250,65 208,32 231,92 189,05 213,30 165,59 A
5412015 T 15 12*15*19 5 | 25 311,88 260,64 288,95 233,63 265,91 205,33 A
5413016 T 16 13*16*21 5 | 25 331,97 277,38 307,53 249,00 282,98 218,91 A
5414017 T 17 14*17*21 5 | 25 525,76 438,88 486,91 393,48 447,93 346,01 A
5415019 T 19 16*19*23 5 | 25 629,38 567,02 570,64 507,22 578,76 446,10 A
5418021 T 21 18*21*25 5 | 25 769,77 640,51 711,80 575,04 653,78 505,53 A
5419023 T 23 19*23*28 2 | 10 1161,84 967,99 1074,40 868,49 987,40 763,24 A
5422026 T 26 22*26*30 2 | 10 2038,52 1699,86 1886,90 1523,96 1734,36 1341,25 C
5424029 T 29 24*29*32 2 | 10 2243,44 1870,33 2076,38 1676,10 1908,52 1475,77 C
5426032 T 32 26*32*34 2 | 10 2624,49 2187,77 2428,79 1961,56 2232,41 1727,25 C
5428034 T 34 28*34*36 2 | 10 3011,00 2508,62 2785,40 2247,12 2559,61 1978,82 C
5431037 T 37 31*37*41 2 | 10 4313,18 3593,57 3989,96 3219,68 3666,28 2604,51 C
5434040 T 40 34*40*43 2 | 10 4518,20 3765,11 4179,48 3373,23 3840,65 2970,54 C
5436043 T 43 36*43*45 2 | 10 5360,27 4466,90 4958,90 4003,71 4557,31 3525,54 C
5440049 T 49 40*49*49 2 | 10 6420,76 5351,42 5744,14 4793,11 5066,49 4222,08 C
(*) Delivery tiA = in stock, B = about 1 week (from partner stock), C = new production, by agreement
(**) while stocks last; afterwards on request
(***) Trademark of Dupont Performance Elastomers
Boring other dimensions on request
Packaging units
Packaging units
Application
Tolerance
Quality
Size
Price € /100 pieces
up to 4 PU
small|large
>= 5 PU
small|large
>= 10 PU
small|large
Packing
unit=PU
pieces
small|large
Code n°
Code n°
100 % Fluoroelastomer made of genuine Viton®(***); 70 +/-5 Shore A; green; excellent chemical resistance,
particularly against aliphatic and aromatic hydrocarbons, fuels, oils, fats, hydraulic fluids, alcohol, glycols and
acids; operating temperature -15 °C to +200 °C, peaks up to +315 °C
Size
Price €/100 pieces
>= 5 PU
small|large
Packing
unit=PU
pieces
small|large
>= 10 PU
small|large
up to 4 PU
small|large
Quality
Wines and oenology, beverage and milk industries, medical technology, biology, cell biology pharmaceuticals,
production of pharmaceutical and food ferments
Tolerances
Application
Silicone; 50 +/-5 Shore A; translucent, compliant: FDA §177.2600; very good biological compatibility; not
cytotoxic; platinum catalysed; without peroxide; odourless and tasteless; Brochure No. 1227, 1980, "Décret
circulaire du Ministère de l´Agriculture" (France), and BS 6920 "WRC Water Byelaws Scheme" (UK); migration:
values below the set limit values in VO CEE 20/128, 93/128 and 93/9; operating temperature -60 °C to +200 °C
Vers. 20|05 Subject to prior sale Page 55
Part 4 Rubber Stoppers
LEZ-TEFLEX Series TD TPE stoppers Food|Pharma|Biology
ISO DIN 3302.1 M4
small or large packaging see table
Dimensions
in mm
Dinf*Dsup*H
5529035 TD 35 29*35*30 10 | 50 114,33 89,92 99,74 78,47 91,18 70,01 17
5531038 TD 38 31*38*35 10 | 50 151,10 118,04 130,72 102,86 119,15 92,57 17
5534041 TD 41 34*41*35 10 | 50 181,18 141,52 156,74 123,33 143,01 110,90 17
5536044 TD 44 36*44*40 10 | 50 187,56 146,67 162,83 128,13 148,06 115,33 17
5541049 TD 49 41*49*40 5 | 25 254,72 199,97 221,44 174,24 201,32 156,40 17
5547055 TD 55 47*55*40 5 | 25 342,89 268,11 298,29 234,71 270,37 211,21 17
5551060 TD 60 51*60*45 5 | 25 440,79 344,90 383,10 301,44 347,62 271,29 17
5556065 TD 65 56*65*45 5 | 25 589,16 462,88 511,98 402,86 465,84 336,39 17
5560070 TD 70 60*70*50 5 | 25 696,95 554,55 614,53 483,55 559,47 434,56 17
5564076 TD 76 65*76*55 5 | 25 5 | 255 | 25 634,74 690,39 543,24 628,53 488,91 17
without boring or standard boring: quickly from stock
On request: coloring (red and gray) with minimum quantity: 1000 pieces from TD35 to TD55
500 pieces from TD60 to TD76
TPE, 50 +/-5 Shore A; translucent; complaint: FDA § 177.2600 e, EU 10/2011; without sulfur and peroxide;
odourless and tasteless; Temperaturbereich -40°C bis +120°C
stopping for the wine industry, beverage, laboratory, medical technology, pharmacy
up to 4 PU
small|large
>= 5 PU
small|large
Quality
Tolerance
Application
Packaging units
Price € /100 piecesCode n° Size
>= 10 PU
small|large
Coloring or special boring at a surcharge of 10%
Packing
unit=PU
pieces
small|large
Standard
boring
Nber x Ø
in mm (*)
Delivery time:
Other dimensions on request
Seite 56 Subject to prior sale Vers. 20|05
Part 5 Glues and Accessories
LEZ-VITFIX Fluoroelastomer glue
Application
Code n° Price €/SU Stock
9999001 88,93 A
9999002 603,25 A
LEZ-VITSEAL Fluoroelastomer sealing paste One-component sealing paste, based on a fluoroelastomer in a ketonic solvent
Application put the cartridge into a suitable pistol and press the trigger
Code n° Price €/SU Stock
9999006 99,07 A
LEZ-VITPRIM Primer for fluoroelastomer glue
Application
Code n° Price €/SU Stock
9999003 21,43 A
9999004 166,57 A
LEZ-SILFIX Silicone glues LEZ-SILFIX
LEZ-SILFIX 732
LEZ-SILFIX HT
Application
Code n° Price €/SU Stock
9998001 18,41 A
9998002 17,58 A
9998003 33,57 A
9998004 24,25 A
Delivery time: A = in stock, B = about 1 week (from partner stock), C = new production, by agreement
Sales unit
on request: glue and sealing paste with the base of Viton® type GF
Sales unit
Sales unit
Sales unit
Sealing compound, cartridge with 400 g
LEZ-VITPRIM consists of reactive polymers based on silane in an ethanol and water-solution. It is a one-layer bonding
agent that helps fluoroelastomers to adhere better to metals and other materials. It can be diluted with ethanol or a
mixture of ethanol + MEK. LEZ-VITPRIM can be used on the following supports: metals such as steel, aluminium,
brass, copper and its alloys or on plastics such as polyamides, polyacetates, polyesters… LEZ-VITPRIM makes the
junction point resistant against environmental influences and high temperatures.
Preparation of the support: after degreasing, it is advisable to conduct a mechanical or chemical pretreatment of the
surface, e.g. by sandblasting or phosphating
100 ml Primer solution
Glues and Accessories
732, FDA compliant, transparent, cartridge with 310 g
1000 ml Primer solution
Special one-component glue, type 732 (made by Dow-Corning), compliant: FDA §177.2600; consisting of a silicone-
mixture with integrated vulcanizing agent. The glue is suitable for foods contacts!
high-temperature resistant (up to +280 °C). Special one-component glue, type CAF 8 (from Bluestar Silicones), silicone
mixture + integrated peroxide-based vulcanizing agent
is a special one-component glue, type CAF 1 or CAF 3 (made by Bluestar Silicones) consisting of a silicone-mixture with
an integrated peroxide-based vulcanizing agent.
apply the glue to the cleaned surface. The vulcanization is finished after 30 mn. After 24 h the gluing station can be
tested. The cross-linking can be accelerated by heating. The join is highly elastic, tear-resistant and resists to
temperatures from -60 °C to +200 °C resp. +280 °C.
Warning ! During handling, small amounts of acetic acid can be released !
CAF 3, transparent, tube with 100 g
CAF 1, reddish brown, tube with 100 g
CAF 8, high temperature, reddish br., cartridge 330 g
Special two-component glue for Fluoroelastomers or Viton, composed of a basis-mixture consisting of a
fluoroelastomer dissolved in methylethylketone (MEK) + a vulcanizing agent. Mix the vulcanizing agent with the basis mixture. Apply within the next 15 minutes to the surfaces and squeeze the
two parts together. After 48 hours, the adhesive strength can be tested.
Warning! MEK is a volatile and flammable solvent !
250 g set with basis mixture + vulcanizing agent
2 kg set with basis mixture + vulcanizing agent
Vers. 20|05 Subject to prior sale Page 57
Part 6 Terms of Sale and Delivery
Page 58 Vers. 20|05
TERMS OF SALE AND DELIVERY (Stand 01.04.2017)
1. General
• The Buyer recognizes these Terms of Sale and Delivery as binding for all orders placed.
• The prices quoted in our price list are non-binding and are only applicable for orientation purposes.
• Our offers shall only be binding after written confirmation by us and are valid for a period of two months.
• Terms and and conditions of the Buyer shall only be binding for us if they have been explicitly accepted by
us in writing.
• Documents and information (drawings, technical data, norms …) pertaining to an offer or advertising materials do not constitute any assurances of properties unless they have been confirmed by us.
2. Order value - prices - shipping
• The minimum order value for Germany is € 100.00, EU countries is €200.00, for European countries
outside the EU €500.00 and other countries by agreement. Orders under the minimum order vaue shall be
subject to a charge of €20.00 for processing costs.
• Our prices are quoted exclusive of value-added tax, including standard packaging. Costs for special
packaging shall be borne by the Buyer.
• We reserve the right to choose the shipping route which appears the most favourable and most
economical to us. Any costs for another, faster or special type of delivery shall be charged to the Buyer.
• Except as otherwise agreed upon, shipment shall be DDP from a net value of goods of €400.00 to Germany, Austria, Benelux and France, from €600.00 to Denmark, Great Britain, the Czech Republic, Poland, Slovakia and Hungary, from €600.00 to Switzerland and Liechtenstein (plus €35.00 customs
clearance charges), from €1,000.00 to Albania, Bosnia, Croatia, Montenegro, Norway, Serbia, Turkey (customs clearance charges to be borne by the Buyer) and other countries as agreed upon. There is a
surcharge of €15.00 for deliveries to islands.
3. Delivery periods
• Delivery periods shall be deemed binding if they have been confirmed by us in writing, and are considered
observed when the goods have left our warehouse or our suppliers‘ premises in the case of direct shipments.
• In the event of unforseeable impediments beyond our control or that of our suppliers (including, but not
limited to strikes, accidents, natural disasters), the delivery periods shall be extended by a reasonable
amount of time.
• In case of a delay in delivery, the Buyer may rescind the contract after expiration of an additional period of
time granted to us as long as the goods have not been produced and despatched prior to expiration of the
deadline.
4. Shipments
• The responsibility for the goods shall pass to the Buyer when they leave our warehouse or our suppliers’ premises in the case of direct deliveries.
• We are entitled to effect part-shipments and shall despatch the goods available in stock. The missing goods
will be sent by us immediately after they have been procured or replaced.
• Partial invoices will be rendered for such shipments in accordance with the terms of sale, price and
delivery as for the overall order.
• In the case of blanket orders, we reserve the right to produce or arrange for the production of the entire
ordered quantity in a single production run. Modification requests can no longer be considered after the
order has been placed. Except as otherwise agreed upon, we shall be entitled to deliver the remainder of
the consignment after a period of six months.
• Deliveries of up to +/-10% shall be admissible in the case of products made to specification.
5. Reservation of ownership
• The delivered goods shall remain our property until full settlement of all outstanding accounts by the
Buyer.
• If the goods are processed, combined or mixed with other objects, an extended reservation of ownership
shall apply, and we shall be entitled to co-ownership of the new object in the ratio of the invoice value of
the goods subject to the reservation of ownership to the value of the other goods.
• In the event of the further sale of the goods subject to the reservation of ownership and/or of the new
object containing the goods subject to the reservation of ownership, the accounts receivable shall be
automatically assigned to us.
Part 6 Terms of Sale and Delivery
Vers. 20|05 Page 59
6. Duties and rights of the customer in the case of claims - cancellation
• The customer is obligated to inspect the goods upon arrival on his premises.
• We are to be notified of any justified claims without delay, and samples or evidence of the faulty goods as well as information required
for the identification of the goods (designation, delivery date, batch No., etc.) shall be sent to us within 8 days.
• Goods shall only be returned to us in accordance with our instructions.
• We are entitled to offer a price reduction, reworking or the replacement of the goods. In the event of the failure of the
reworking of the goods or a replacement consignment, the Buyer shall be entitled to rescind the contract of purchase.
Further claims, particularly for compensation, are excluded.
• Claims concerning latent defects which reach us more than 30 days after the delivery date shall no longer be accepted by us.
• If goods are returned without authorization, the customer shall be charged an amount of €50.00 if the value of the goods is under €500.00, and a charge of 10% of the value of the goods will be made for goods with a value from €500.00.
7. Liability - warranty
• We shall only be liable to pay compensation for a breach of our contractual obligations if said breach arises as a result of
intent or gross negligence on our part, and not for those cases in which the Buyer may be expected to take out insurance in
the customary manner; in any event, up to a maximum of EUR 500,00.00 in the case of personal injury and EUR 150,000.00
for damage to property.
• The Buyer shall check the suitability of the ordered goods for the intended purpose himself by means of appropriate tests.
He thus assumes responsibility for any consequential damage or loss and cannot assert any compensation claims against us.
• The warranty period is 24 months from the date of delivery. Any claims due to defects, including latent defects, shall, in any
event, become statute barred when the warranty period expires.
8. Molds - tools - prototypes
• The costs for making prototypes including molds and tools shall be borne by the Buyer. In the case of tools paid for on a pro-
rata basis, we reserve the right to charge the residual costs for the tool if no serial production takes place within a period of
three months after sampling.
• Molds and tools shall remain our property and/or the property of our upstream suppliers even if it has been agreed that the
Buyer will assume a share of the costs. The Buyer may come to an agreement with us to purchase the property. In such
case, ownership will be transferred to the Buyer after settlement of all accounts receivable from the business relationship
regarding molds, tools, prototypes and goods.
9. Copyright
• We reserve the right of ownership and copyright on drafts, drawings and other documents pertaining to an offer. They may
only be made accessible to third parties with our consent and are to be returned to us if so requested.
• When submitting drawings, models or samples, the Buyer guarantees that no proprietary rights of third parties are
infringed. In the event of an infringement of the proprietary rights of third parties, we reserve the right to rescind the
contract of purchase. In this case, the Buyer shall not be entitled to assert any claims for damages and shall assume all costs
which have already been incurred.
10. Payment
• Our bank accounts: Bank1Saar: IBAN DE 95 5919 0000 0401 6960 08 / BIC SB SABA DE 5S
Kreissparkasse St.Wendel: IBAN DE 93 5925 1020 0120 1204 15 / BIC SALA DE 51 WND
• Contractual partner hereby revocably consents to having the invoice sent to the communications data announced by
contractual partner (email address) by email in the electronic formats .doc or .pdf. As the recipient of the invoice,
contractual partner shall ensure that electronic invoices can be sent in a due and proper manner and that technical
equipment such as filter programs and firewalls is adapted accordingly. Contractual partner shall notify us in writing of his
communications data and any changes thereto without delay. Invoices sent to the communications addresses most recently
announced by contractual partner shall be deemed received by the latter.
• Germany, France, Benelux, Austria, Switzerland and Liechtenstein: First orders with payment in advance 3% discount, then
is valid: 2 % discount within 14 days or 30 days net from date of invoice. Other countries: with payment in advance.
Payment is to be effected by international bank transfer to one of our accounts. All bank and customs clearance charges
shall be borne by the buyer
• In the event of default, at the latest 8 days after the first reminder, we are entitled to charge interest in the amount of the
respective rates charged by banks for overdrafts, with a minimum rate of 8% above the discount rate of the German Central
Bank (Deutsche Bundesbank).
• Should the financial circumstances of the Buyer jeopardize our claim for payment or in the event of a default, at the latest 8
days following the third reminder, we shall be entitled to demand the immediate return of the goods at the expense of the
Buyer. The removal of the goods shall not be construed as a withdrawal from the contract. We may demand advance
payments or securities for outstanding deliveries. The Buyer may avert legal consequences by means of payment or by
providing securities in the amount of our accounts receivable.
11. Place of performance – place of jurisdiction
• The principal place of business of our company and/or the corporate domicile of our partners, where direct shipments to
the Buyer have been agreed upon with our partners, shall be the place of perfomance for our deliveries.
• The laws of the Federal Republic of Germany shall apply exclusively, including for overseas customers. Amtsgericht
Saarbrücken (Saarbrücken District Court) shall be the place of jurisdiction.
Am Hottenwald 8
66606 St.Wendel
Telefon: +49 (0) 6851/97394 0
Fax: +49 (0) 6851/ 97394 44
industrie@lezaud.com www.lezaud.com
Page 60 Vers. 20|05
TERMS OF SALE AND DELIVERY
o Trade Price in Euro
o Delivery with normal packing included, free domicile, duty unpaid:
- from 400,00 € to Germany, Austria, Benelux and France
- from 600,00 € to Denmark, Great Britain, Czech Republic, Poland, Slovakia, Hungary
- from 600,00 € to Switzerland and Liechtenstein (plus 35,00 € customs clearance charges)
- from 1000,00 € to Bulgaria, Finland, Ireland, Italy, Portugal, Romania, Slovenia, Spain, Sweden, Estonia, Latvia, Lithuania, Greece, Malta, Cyprus
- from 1000,00 € to Albania, Bosnia, Croatia, Montenegro, Norway, Serbia, Turkey (customs
clearance charges to be borne by the buyer)
- other countries: according to agreement
- in the case of island shipping: supplementary charge of 15,00 €
o Minimal order amount:
- For Germany: 100,00 €
- for EC countries: 200,00 €
- for countries outside the European Community: 500,00 €
- for other countries: on agreement
o Handling surcharge for orders below under the minimal amount:
- plus 20,00 €
o Payment:
- Germany, France, Benelux, Austria, Switzerland and Liechtenstein:
First orders with payment in advance, then is valid:
2 % discount within 14 days or 30 days net from date of invoice
- Other countries: with payment in advance
- Payment is to be effected by international bank transfer to one of our accounts.
- All bank and customs clearance charges shall be borne by the Buyer.
- Our bank accounts
Bank1Saar IBAN DE 95 5919 0000 0401 69 60 08
BIC SABA DE 5S
Kreissparkasse St. Wendel: IBAN DE 93 5925 1020 0120 1204 15
BIC SALA DE 51 WND
o Claims have to be notified within 8 days
o Goods may only be returned with our prior consent.
o Reserved ownership, also in its extended form until full payment and settlement of all other
accounts receivable.
To view the complete version of our Terms and Conditions of Sale and Delivery, please visit
www.lezaud.com or consult our price list.
Competence and Innovation in Rubber and Elastomers
Version 20|01 valid from 01 Mai 2020
Recommended