View
45
Download
0
Category
Preview:
Citation preview
DECKING INSTALLATION : I-SERIES 1
I-SERIES COMPOSITE DECKING
INSTALLATION INSTRUCTIONS
TERRASSE EN COMPOSITE I-SERIES
INSTRUCTIONS D’INSTALLATION
PLATAFORMA COMPUESTA SERIE I
INSTRUCCIONES DE INSTALACIÓN
2 DECKING INSTALLATION : I-SERIES
TABLE OF CONTENTS
English Introduction ����������������������������������������������������������������������������������������������������������������������������������������������3PreinstalaciónPre-Installation Required Tools ������������������������������������������������������������������������������������������������������������������������������������������4 I-SeriesInstallationBoardOptions���������������������������������������������������������������������������������������������������������4 Standards/Safety/Storage & Handling���������������������������������������������������������������������������������������������������5 Plan/SitePreparation......................................................����������������������������������������������������������������������6 DeckBoardProfile............................................................���������������������������������������������������������������������6Installation Expansion&Contraction..................................................���������������������������������������������������������������������7 Acclimating/BreakerBoards.��������������������������������������������������������������������������������������������7 CodeCompliance�������������������������������������������������������������������������������������������������������������9 Fastening����������������������������������������������������������������������������������������������������������������������������������������������9 BoardApplication������������������������������������������������������������������������������������������������������������10 Fastening Points�������������������������������������������������������������������������������������������������������������11 BoardRippingGuidelines�������������������������������������������������������������������������������������������������������������������12 TopFixingGuidelinesForRippedBoards.����������������������������������������������������������������������12 Cutting/Supports&Spans.................����������������������������������������������������������������������������14Care&Maintenance..............................................................�������������������������������������������������������������������������������15Warranty���������������������������������������������������������������������������������������������������������������������������������������������������������������18
AboutCaliforniaPropositon65https://fortressbp.com/about/californiaproposition65
Français Introduction.....................................................................�������������������������������������������������������������������3Pré-Installation Outilsnécessaires.............................................................�������������������������������������������������������������������4 Optionsd’installationdeplanchesI-Series�����������������������������������������������������������������������������������������4 Normes/Sécurité/Entreposageetmanutention...............�������������������������������������������������������������������5 Plan/Préparationdusite...................................................������������������������������������������������������������������6 Profildeplanchedeterrasse............................................�������������������������������������������������������������������6Installation Expansionetcontraction..................................................�������������������������������������������������������������������7 Acclimatation/Planchestransversales�����������������������������������������������������������������������������7 Conformitéauxnormes���������������������������������������������������������������������������������������������������9 Attaches.......................................................................�����������������������������������������������������������������������9 Posedesplanches����������������������������������������������������������������������������������������������������������10 Pointsd’attache...�����������������������������������������������������������������������������������������������������������11 Directivesdecoupedesplanchessurlelong������������������������������������������������������������������������������������12 Directivesd’installationparlehautpourplanches coupéessurlelong.�������������������������������������������������������������������������������������������������������12 Coupes/Supportsetlongueurs.................����������������������������������������������������������������������14Entretien...................................................................���������������������������������������������������������������������������������������������15Garantie....................................................................................����������������������������������������������������������������������������18
Àproposdelaproposition65enCalifornie https://fortressbp.com/about/californiaproposition65
Español Introducción ���������������������������������������������������������������������������������������������������������������������������������������������3Preinstalación Herramientas requeridas �������������������������������������������������������������������������������������������������������������������������4 OpcionesdeinstalacióndeltablónSerieI ����������������������������������������������������������������������������������������������4 Normas, seguridad, almacenamiento y manejo �������������������������������������������������������������������������������������5 Planypreparacióndelsitio ����������������������������������������������������������������������������������������������������������������������6 Perfildeltablerodelaplataforma ����������������������������������������������������������������������������������������������������������6Instalación Expansiónycontracción ��������������������������������������������������������������������������������������������������������������������������7 Aclimataciónytablonesdelrompiente ����������������������������������������������������������������������������������7 Cumplimientodeloscódigos ��������������������������������������������������������������������������������������������������9 Sujetadores �����������������������������������������������������������������������������������������������������������������������������������������������9 Aplicacióndetablones �����������������������������������������������������������������������������������������������������������10 Puntos de sujeción �����������������������������������������������������������������������������������������������������������������11 Lineamientosparaaserrarlostablones �����������������������������������������������������������������������������������������������12 Lineamientosprincipalesdearregloparatablonesaserrados �������������������������������������������12 Cortes,soportesytramos �����������������������������������������������������������������������������������������������������14Cuidadoymantenimiento ������������������������������������������������������������������������������������������������������������������������������������������15Garantía �����������������������������������������������������������������������������������������������������������������������������������������������������������������������18
Acercadelapropuesta65deCalifornia https://fortressbp.com/about/californiaproposition65
DECKING INSTALLATION : I-SERIES 3
READ INSTRUCTIONS COMPLETELY BEFORE STARTING INSTALLATION
Guideline Limitations ThisinstallationguideisintendedonlyforI-Series.The personusingtheseguidelinesshouldalreadyhavea generalunderstandingofdeck-buildingpractices.Decks mustbebuiltinaccordancewithallrelevantbylawsand building codes�
Itistheresponsibilityoftheinstallertomeetallcodeand safety requirements, and to obtain all required building permits.Thedeckandrailinginstallershoulddetermine andimplementappropriateinstallationtechniquesfor eachinstallationsituation.FortressBuildingProductsand itsdistributorsshallnotbeheldliableforimproperor unsafeinstallations.Theseguidelinesaredesignedtoassist youwithI-Seriesinstallationandadviseyouontheunique installationrequirementsforthisproduct.
Note: • JoistspacingforI-Seriesprofilescanbeupto16”
[406.5mm]O.C.inmostresidentialapplications.Exceeding thislengthcanjeopardizetheperformanceofyourdeck.
• Doublejoistsshouldbeusedatallbuttjoins.Ensurethat hiddenfastenersareinstalledwithin1”[25.5mm]ofthe end of the I-Series decking board�
• Breaker-boardsrunningperpendiculartootherdecking Boardsshouldbeusedatbuttjoinstoassistwith
controllingtheexpansionandcontractionofI-Series decking.Top-fixedboardsshouldbefastenedatexactly
1-1/4”[31.75mm] from any edge of the board� • Expansiongapsareneededatbothends.Toallowfor thematerialtonaturallyexpandandcontractwithout any issue�
INTRODUCTION
4 DECKING INSTALLATION : I-SERIES
Required Tools
Goggles
Drill
TapeMeasurer
LevelTool
SpeedSquare
MiterSaw
T-20 DriverBit
KX1-50 HULK H-Drive
BitExtender
DrillBits:5/32
[3�97mm]
PencilSafety Gloves
Dust Mask
Vacuum
Standards BeforeinstallinganyFortressBuildingProduct,ensurethat theapplicationcomplieswiththelocalbuildingcodes.Be suretocomplywithmaterialmanufacturerspecifications. Wheremanufacturersandbuildingcodesdiffer,revertto thebuildingcoderequirements.Checkthatyourchoiceof productsissuitableforitsintendedapplication.For furtherproductspecificationandinformationvisitwww. fortressbp.com.
Hard-BristledBroom
Fortress Decking: I-Series Installation Board Options
PRE-INSTALLATION
GroovedDeckBoard SquareEdgeBoard StarterDeckBoard
12”[305mm]
FasciaBoard
8”[203mm]
Fascia/RiserBoard
DECKING INSTALLATION : I-SERIES 5
Goggles Safety Gloves
Dust Mask
Hard-BristledBroom
• Alwayswearappropriatepersonalprotectionequipment (PPE).Complywiththelocaloccupationalhealth
andsafetylegislation. • RefertotheapplicableMaterialSafetyDataSheet(MSDS). • Workinwell-ventilatedarea. • Maintainacleanworkarea. • CuttingI-Seriesproducesfineparticulatematter. • Cutboardsmayhavesharpedges(particularly mitered cuts)�
Storage & Handling • Boardsarebundledforconvenienceandcan,asaresult,
beheavy.Takecarewhenlifting,placingorremovingfrom raisedpallets.Morethanonepersonmayberequiredfor liftingdependingonthelengthoftheboardsandthe
number of boards within a bundle� • Whenhandlinglengthsofboardsgreaterthan12ft
[3658mm],ensurebothendsareliftedsimultaneously andevenly.Lifttheboards3ft[915mm]fromeachendto providebettercontrol.
• Handletheboardscarefully.Droppingtheboards(andall highimpactloadsingeneral)canresultindamageto
theprofiles. • Duringtransportationusecornerprotectorswhere strappingisrequired. • Allcomponentsshouldbestoredcompletelyundercover. • Whenstoringboards,apalletorflatsurfaceshouldbe
usedtosupportthefulllengthofeachcomponent. • Nocomponentshouldsitinwaterorsimilar. • Avoidover-stackingand/orirregularstacking.
Vacuum
Safety RecommendedTools:
6 DECKING INSTALLATION : I-SERIES
Plan • Assessthebuildingsiteandensuretheproductis
suitablefortheintendedapplication. • Determineappropriatespansfortheselectedprofile.This
willdependontheapplicationandtheloadingclassforthe region.Suggestedspansareprovidedfortypical
residentialscenarios. • Developamaintenanceplantoensurethelongevityofthe
system� This should consider drainage, corrosion and vegetationunderandaroundthedeck.
Site Preparation • Ensureadequatedrainagebelowthedeckfootprint. Preventpoolingwaterand/orerosion. • Removevegetationfromthedeckfootprintandplacean
appropriategeotextiletopreventregrowth.
Deck Board Profile
DescriptionProfileWidth
(in[mm])
ProfileHeight
(in[mm])
ProfileLength
(in[mm])
Weight (lbs/ft)
Max.Spans
(in[mm])
5-3/8”[136mm]
5-1/2”[140mm]
5-3/8”[136mm]
11-3/4”[299mm]
7-1/4”[184mm]
1”[25mm]
1”[25mm]
1”[25mm]
11/16”[18mm]
5/8”[16mm]
144”,192”,240”[3658mm, 4877mm, 6096mm]
240”[6096mm]
192”[4877mm]
144”[3658mm ]
144”[3658mm ]
16”[407mm]
16”[407mm]
16”[407mm]
N/A
N/A
1�57 lbs/ft
2�94lbs/ft
2�01 lbs/ft
4�60 lbs/ft
2�55 lbs/ft
GroovedDeckBoard
SquareEdgeBoard
StarterDeckBoard
12”[305mm]FasciaBoard
8”[203mm]Fascia/RiserBoard
DECKING INSTALLATION : I-SERIES 7
INSTALLATION: EXPANSION & CONTRACTION
Acclimating Boards Installationcantakeplaceoverafewdays,resultinginvarying installationtemperatures,dependingontheprojectsite,the
boardsmayexperiencedifferingheatingandcoolingrates. Allow boards to acclimate on-site for 24 hours before installing.Oncetheinstallationiscomplete,waittocutthe
ends of the installed boards to the desired length in order to allow the boards to fully acclimate to the site�
As shown in Fig� 1�
8 DECKING INSTALLATION : I-SERIES
Breaker Boards Breakerorboarderboards(boardslaidat90°totherestofthe deck) can be used to create a boarder around the deck and
willaidincontrollingexpansion&contractions.Blockingwillneedtobeusedtosupportthebreakerboard.Atamaximumspacingof16”[407mm]O.C.Thebreakerboardwillneedtobesurfacemountedtotheblockingwithcompositescrews.
As shown in Fig� 2� Note: • Use a breaker board between long run boards to assist incontrollingexpansionandcontraction.Thisapproach
hastheaddedbenefitofcreatingamorevisuallypleasing aesthetic.ReferenceSupports&Spanssectiononpage14. • Breakerboardsmustbesupportedbyjoistsorblocking. • Where breaker boards cannot be used, double joists must
beusedtosupportthebuttjoins.Useaminimumoftwo fastenersperjoist,evenlyspacedandaminimumof
1-1/4”[32mm] from any board edge� • Joistspansshouldbealteredincaseswhereboardsare
installed diagonally�Fig. 2
20` Deck Board
WA
LLWA
LL
1/8” Gap
1/8”Gap
20` ( with expansion at 1/8” per side)
Estimated expansion allowance between 2 fixed points in a cooler climate.
Blocking Blocking
Breaker Board
BreakerBoard
Blocking
Joist
Fig. 1W
ALLW
ALL
20`[6096mm]DeckBoard
Estimatedexpansionallowancebetween2fixedpointsinacoolerclimate50°F-10°Cbellow�
20` [6096mm] (Withexpansionat1/8”[3mm] perside)
Breaker Board1/8”[3mm]Gap1/8”[3mm]Gap
TOP VIEW
DECKING INSTALLATION : I-SERIES 9
Multiple Board Lengths Placed Consecutively (TOP VIEW)Expansiongapprovidedforthechangeinlengthofbothboards
Breaker Boards
FIXEDWALL
FIXEDWALL
Expansion Gap
Single Board Lengths
Expansion Gap
Joist Blocking
Multiple board lengths placed consecutivelyExpamsion gap provided for the change in length of both boards.
Expansion Gap
Double joist on butt joins
Expansion Gap
FIXEDWALL
FIXEDWALL
Original length
Code Compliant gapCode Compliant gap
Maximum allowable expansion point
Code compliance:When installing against vertical structures, allow for both the code required spacing and the required expansion gap to ensure board remain code compliant after board expansion.
Fig. 4
Code Compliance Wheninstallingagainstverticalstructures,allowforboththe
coderequiredspacingandtherequiredexpansiongapto ensureboardremaincodecompliantafterboardexpansion. As shown in Fig� 5�
ExpansionGap ExpansionGap
DoubleJoistOnButtJoins
Breaker Boards
FIXEDWALL
FIXEDWALL
Expansion Gap
Single Board Lengths
Expansion Gap
Joist Blocking
Multiple board lengths placed consecutivelyExpamsion gap provided for the change in length of both boards.
Expansion Gap
Double joist on butt joins
Expansion Gap
FIXEDWALL
FIXEDWALL
Original length
Code Compliant gapCode Compliant gap
Maximum allowable expansion point
Code compliance:When installing against vertical structures, allow for both the code required spacing and the required expansion gap to ensure board remain code compliant after board expansion.
Fig. 5
CodeCompliantGapCodeCompliantGapOriginalLength
MaximumAllowableExpansionPointFixed Wall
Fixed Wall
TOP VIEW
INSTALLATION: FASTENING
Installation Tips:
Nails Fasteners Drill
Fig. 3
Breaker Boards
FIXEDWALL
FIXEDWALL
Expansion Gap
Single Board Lengths
Expansion Gap
Joist Blocking
Multiple board lengths placed consecutivelyExpamsion gap provided for the change in length of both boards.
Expansion Gap
Double joist on butt joins
Expansion Gap
FIXEDWALL
FIXEDWALL
Original length
Code Compliant gapCode Compliant gap
Maximum allowable expansion point
Code compliance:When installing against vertical structures, allow for both the code required spacing and the required expansion gap to ensure board remain code compliant after board expansion.
Single Board Lengths (TOP VIEW)
Fixed Wall
Joist Blocking
BreakerBoardsExpansionGap ExpansionGap
Fixed Wall
10 DECKING INSTALLATION : I-SERIES
• Adrillwithadjustabletorquesettingsisrecommended. • Pre-drillintemperaturesbelow40°F[5°C]. • Pre-drillingholesizeshouldbeequaltothesmallest diameter of the screw�
• Referencefastenermanufacturerforpre-drillbitsize. • DO NOTpre-drillwoodsubstructure.Board Application • TheinstallationofI-Seriesboardsiscomparabletothatof
othercompositeordeckingboards. • I-SeriesprofilesARE NOT intended for use as structural
members� • Thesurfaceoverhangofthedeckmustbelimitedtoa
maximumof1-1/4”[32mm]andtakeintoconsideration the thickness of the Fascia or trim�
• Reflectivesurfaces(forexample,low-Eglassormetallic siding)maycauseunusualUVimpactand/orheat
build-uponadeck,whichmaycauseunexpectedresults in the I-Series material� Design your deck to allow
forthiswherepossible. • Providegroundclearanceforadequateventilation. Ventilationcanhavetheaddedbenefitofassisting
withexpansionandcontraction.AsshowninFig.1.Fig. 1 Gapsbetweendeckboards
assistwithventilation
Condensation&Evaporationoccurnaturally.Sealingoffadeck may therefore cause a constantlywetenvironment
that may harm the substructure beneath, which
in the long term could harm your deck�
AProperlyventilateddeckallowsairtomove&will
assist with clearing excess moisture in the air�
A1-1/2”[38mm]gapbeneaththedeckisrequiredforadditionalventilation.
TOP VIEW
• DO NOT use nails to fasten I-Series boards� • UsehighqualityHULKfastenerssuitableforthelifespanof
thedeckandtheatmosphericconditionsofthesite. • I-Seriesboardsrequiretwofastenerspointsperjoist. • Fasten 1-1/4”[32mm] from any edge of a board�
DECKING INSTALLATION : I-SERIES 11
Fastening Points Using A Single Grooved Edge Board TheI-SeriesStarterBoardprofilecanbeusedtoframeyour
deck.Itisonlygroovedononesideandhasafinishedsquareedge on the other side�
• Thisperimeterboardshouldbetop-fixedusingcolor matchingcompositedeckscrews.
• The screws should be located 1-1/4”[32mm] away fromanyedgeoftheI-Seriesprofile. • UseHULKhiddenfastenersbetweendeckingprofiles. As shown in Fig� 2, 3 & 4� Note: DO NOToverdrivethescrewintothedeckingsurface. I-Seriesdeckingisnotsolidandhascavitiesthatcanbe compromisedifyourdrilltorquesettingistoohigh.
Fig. 2
GroovedBoard StarterBoardTopFixingScrew
HULK Hidden Fastener
GroovedBoard
StarterBoard
TOP VIEW
SIDE VIEW
Fig. 3 SIDE VIEW
TOP VIEW
TopFixingScrewSquareBoard
SquareBoard
GroovedBoard
GroovedBoard
12 DECKING INSTALLATION : I-SERIES
INSTALLATION: BOARD RIPPING GUIDELINES
Top Fixing Guidelines for Ripped Boards • BoardscanbefastenedusingTopFixingScrewsincertain circumstances,particularlyiftheboardshavebeenripped. • Asingle,longitudinallineoffastenersissusceptibleto pivotingandmaybecomeahazard. • Allboardsrequiretwofastenersateveryjoist.Either two
HULKclips,aHULKclipandaCompositeScrewortwo CompositeScrewstobeadequatelyfastenedtotheframe. As shown in Fig� 1� • Alltopfixingscrewsshouldbepositioned 1-1/4”[32mm] from the edge of the board�
Fig. 1
Final ProductRip Cut
Incorrect CorrectSECTION VIEW
Fig. 4
CORRECTINCORRECT
SECTION VIEW
Ideal Screw Placement
Space7/8”[23mm]-1-3/16”[30mm]space2”[51mm]-2-5/16”[58.5mm]Space3”[76mm]-4-1/8”[105mm]
Ripsorlengthwisecutsshouldavoidthewebor“feet”oftheboard.Fig.2illustratesvariouswaysaboardcanberippedandsecurelyfastenedsoastopreservetheintegrityofyourdeck.
DECKING INSTALLATION : I-SERIES 13
Note: • Minimumboardwidthafterrippingis2-1/2”[63mm]. • It’srecommendedtoripboardsupsidedownonyourtable
sawinordertoseeexactplacementofthesawblade relativetothefeetoftheboard.
Fig. 2
RIPCUT
FINAL PRODUCT
SECTION VIEW
• Whereverpossible,ifanI-Seriesboardhasbeenripped,facetherippededgeinwardstowardstheotherdeckingboardsandallowthenon-rippededgetoactastheendofthe deck�
• Neverfastenthroughthewebor“feet”oftheI-Seriespro-fileinordertoavoidcrackingtheI-Seriesboard.
As shown in Fig� 3�Fig. 3
CORRECTINCORRECTSECTION VIEW
Cutting • I-Series boards should not be cut thinner than 2-1/2”[63mm]. • IfnecessaryripboththefirstandlastI-Seriesboardstofit
yourinstallationspace. • Useaminimumoftwofastenersperjoist,evenlyspaced
and a minimum of 1-1/4”[32mm] from any board edge�
14 DECKING INSTALLATION : I-SERIES
Fig. 4
DoubleJoists=ButtJoins Blocking=BrackerBoards
Fig. 6
16”[407mm]On-centerSpacingfor90oDeckBoards
12”[305mm]On-centerSpacingfor45oDeckBoards
90o
16”[407mm]
45o
12”[305mm]
JoistSpacingForGrooved&SquareBoardsAtanAngle
90o 60o 45o 30o
16”[407mm]
12”[305mm]
14”[356mm]
8”[203mm]
TOP VIEW
Fig. 5 TOP VIEW
Joist
Hidden Fastener TopFastener
IntermediateBoards
FirstBoard
LastBoard
Minimumof1-1/4”[31.75mm]to any edge
Note: Pre-drill may be required whentopfixing
Maxoverhangof1-1/4”[32mm]
• Boardscanbemitered.Usetwofasteners,evenlyspaced and a minimum 1-1/4”[32mm] from any edge,
permiteredboard.DO NOT router boards�
Supports & Spans • Thechoiceofstructuralmaterialwilleffectthelifespanof
adeck.Makecertainthatlocalbuildingcodesarefollowed. • Boardsshouldnotbeallowedtooverhangmorethan
1-1/4”[32mm].AdditionalSupportarenecessary,As shown in Fig� 4, 5 & 6�
DECKING INSTALLATION : I-SERIES 15
CARE & MAINTENANCE
CLEANING YOUR DECK BOARDSWhat you will need
Soap Water Bucket Sponge High Pressure Hose WithFanTip
Hard-BristledBroom
STEP 1:Applysoapywatertoyourdeckwithasponge.STEP 2:Sweeptheliquidoveryourdeckusingthehard-bristled broom,makingsuretoremovealldirtandresiduefrom thegapsbetweenthedeckingboards.Sweepinginthe directionofthegrainisbest.STEP 3:Ifresidueand/ordirtarestillevidentonyourdeck,a highpressurehoseisveryeffectiveinremovingstubborn andunavoidableorganicwaste.
NOTE:Useahighpressurehosewithawidefantipatpressuresunder1500psi.Remembertokeepthehoseatleast12”or300mmawayfromthesurfacewhenspraying.
Forbestresults,highpressurehoseyourdeckwhilesimultaneouslybrushingitwithahard-bristledbroomandsoapywater.Werecommendpressurewashingyourdeckonceamonthtokeepitlookingcleanandcaredfor.
Pleaseexerciseextremecautionaspressurewashingcandamageyour I-Seriesdeckifdoneincorrectly.Ifyounoticeanychangestothesurfaceofyourprofile,stopimmediatelyand contact Fortress�
*DO NOTusestandardcompositedeckcleanersonI-Series.
16 DECKING INSTALLATION : I-SERIES
General Care • Wash I-Seriesprofileperiodicallyusingstandardhousehold
cleaners� • Strongdetergents,oxidizersandconcentratedmineral acids,aromaticand/orhalogenatedhydrocarbons,esters,
ethers,andketonesshouldbeavoided. • Water,aqueoussaltsolutions,detergentsolutions,dilute
acidsandalkaliesareacceptable. • Toensurethatthecleanerwillnotdamagethecap,test
asmallpatchofprofileorascrappieceofI-Series material before use� • Donotusestandardcompositeprofilecleaners on I-Series� • Cleanupspillsassoonasispossibletopreventthemfrom
becoming stains� • Certainchemicalsininsectsprays,sunblock’s,oilsfrom
certainplants,andundilutedchlorinearesomecommon materialsthatmaycomeincontactwithyourprofileand arenotcompatiblewiththeHDPECap.Preventthesema terialsfrominteractingwiththeI-Series boards�
• Items such as rubber mats and garden hoses may leach esters,whichmayaffectthesurfaceoftheI-Series boardsovertime,careshouldbetakentoprevent
prolongedexposure.• Periodicallymove,orremove,furniture,doormats,planters
andotheraccessoriestoavoiddifferentialweathering.• PVCglues,cement,paint,etc.maydamageanddiscolorthe
surfaceoftheprofile.• Abristledbrush,canbeusedtoremoverust,orsimilar,stains.• Forparticularlystubbornstains,thesurfacecanbegently
sanded.Thisnaturallyremovesmaterialfromtheprotectivecapandshouldbeavoidedasitmayaffectthesurface
of the board�
DECKING INSTALLATION : I-SERIES 17
• Mineraldepositsthatoccurasaresultoftheevaporationofsolutionswithhighsaltcontentscanleavewhiteresiduesonadecksurface.Theprimarycause(s)ofthisisduetothe
waterqualityand/orsurroundingenvironment.Oneshouldavoidallowingwaterwithahighmineralcontenttopoolonthedeckprofileswherepossible.Theseresiduescanbecleanedwiththemethodsprescribedabove.Foranyfurtherassistancepleasecontactusatinfo@fortressbp.com�
Ice & Snow • Typicalmaterialsusedtocleaniceandsnowfromsurfaces
that contain calcium chloride and/or sodium chloride may be used on I-Seriesboards.Asdiscussedabove,thesemayleaveawhiteresidueonthedeck.Thesecan,however,becleanedwiththemethodsprescribedabove.
• Donotusemetalshovelsorothersharpobjectsonthe I-Seriessurface.Useaplasticshovelandrounded/beveled
toolswhenscrappingofficeorsimilar.• Notethatsurfaceslipresistancewillbereducedwithice, snoworsimilarpresentandcareshouldbetakenon these occasions�
Static Charge • Materialswithgreaterpolaritythatareinadryandlow humidityenvironmentwillhaveastrongerchargeupon separationofthetwomaterials.• Staticchargebuildupcanbereducedbygroundingtheprofile
structureand/orincreasingthehumidityoftheenvironment.Staticdischargecanbeavoidedinparticularareas
(forexample,accesspoints)withtheplacementofstatic control grounding mats�
18 DECKING INSTALLATION : I-SERIES
ThisFortressBuildingProductsI-SeriesDeckingLimitedWarranty(“LimitedWarranty”)isgiventotheoriginalpurchaser(“Purchas-er”or“You”)ofFortressDeckProducts,LLC(“FortressDeck”)FortressInfinityDecking(“Product”).ForpurposesofthisLimitedWarranty,a“ResidentialApplication”meanstheinstallationoftheProductonasingle-familyresidence,anda“CommercialApplication”meansanyinstallationoftheProductotherthanonasingle-family residence�
1. Product Performance:At Fortress Building Products, we stand behind every product we sell. However, it is normal for all decking products to age over time. Aging is a common occurrence for a product that is exposed to sun, rain, or any elements of nature. Predicting the life of the Product can be challenging since no two instal-lations experience aging factors in the same way. The Product will age at different rates due to climate, UV index, quality of installation, usage, and many other factors that can cause aging. Fortress Building Product has provided You this Limited Warranty, subject to the terms and conditions set forth herein, to give You peace of mind in the event a manufacturing defect causes a failure of the Product as outlined below. If, for any reason, the Product shows signs of failure, damage, or dete-rioration, immediately replace or repair the Product to avoid potential safety hazards.
2. Warranty Coverage: Standard 25-Year Limited Residential Warranty. Standard 10-Year Limited Commercial Warranty.
FortressBuildingProductswarrantstoPurchaser,foraperiodoftwenty-five(25)yearsfromthedateoforiginalpurchaseforResidentialApplication,andforaperiodoften(10)yearsfromthedateoforiginalpurchaseforCom-mercial
DECKING INSTALLATION : I-SERIES 19
Application,thattheProductshall,undernormaluseand properserviceconditions,befreefrommaterial manufacturingdefectsandshallnotsplit,splinter,rotor sufferstructuraldamagefromtermitesorfungaldecay. Fade and Stain Limited Warranty for Residential Application:
FortressBuildingProductwarrantsthefadeandstain resistance of the Product to Purchaser, under normal useandproperserviceconditions,foraperiodoftwen-ty-five(25)yearsfromthedateoforiginalpurchaseforResidentialApplication,asfollows: (A) Fade Resistance: TheProduct’scolorwillnotfadefromlightandexposuretotheelementsofnaturemorethan5DeltaE(CIE)Units.Importantly,whiletheproductisdesignedtoresistfading,FortressBuildingProd-uctsdoesnotwarranttheProducttobefade-proofasnomaterialisfade-proofwhenexposedtoUVraysandotherelements of nature� (B) Stain Resistance: The Product will be resistant topermanentstainingresultingfromfoodandbeverageitemstypicallypresentonaresidentialdeck(e.g.,mustard,ketchup,mayonnaise,barbecuesauce,soda,andcoffee)spilledontothesurfaceoftheProduct,orfrommoldandmildewnaturallyoccurringintheenvironment,provided that:
1. Withinone(1)weekofexposureofthefoodor beveragetothesurfaceoftheProductor,inthe case of mold and mildew, within one (1) week of thefirstappearanceofthemoldandmildew, Purchaserattemptstocleantheaffectedareausing thecleaningproceduresoutlinedintheFortress DeckCleaningandCareGuide(availableatwww. fortressdeck�com/resources); 2. Ifthestainisstillunreasonablyvisibleafter completingthecleaningproceduresoutlinedinthe FortressDeckCleaningandCareGuide,the Purchasermusthavetheaffectedareacleanedby aprofessionaldeckcleaneratthePurchaser’s
20 DECKING INSTALLATION : I-SERIES
aprofessionaldeckcleaneratthePurchaser’s expensewithinone(1)weekofexposureofthe foodorbeveragetothesurfaceoftheProductor, in the case of mold and mildew, within one (1) weekoffirstappearanceofthemoldandmildew; and 3. If,aftercompletingtheimmediatelypreceding two(2)steps,thestainstillremainsunreasonably visible,thePurchasermustnotifyFortressDeck withinthirty(30)daysaftertheprofessional cleaningwascompleted.
FortressBuildingproductsdoesnotwarrantthattheProd-uctisstain-proof,anddoesnotprovidewarrantycoveragefromspilledorotherwiseappliedfoodorbeveragesub-stances,orfrommoldandmildew,whichisnotpromptlyandproperlycleanedasoutlinedaboveandinaccordancewiththeFortressBuildingProductsCleaningandCareGuide(availableatwww.fortressdeck.com/cleaningand-care).Additionally,becausemoldandmildewcansettleand grow on any outdoor surface, including this Product, Youshouldperiodicallycleanandremovedirtandpollenfrom the Product that can feed mold and mildew�
AllwarrantiesandcoverageprovidedunderthisLimitedWarrantyaresubjecttoallexclusions,limitations,andrestrictionsset forth herein�
3. Transferability: ThisLimitedWarrantymaybetransferredone(1)time, withinthefive(5)yearperiodbeginningfromthedateof originalpurchasebythePurchaser,toasubsequentbuyer ofthepropertyuponwhichtheProductwas originally installed�4. Exclusions From Warranty Coverage: FortressBuildingproductdoesnotwarrantagainstandis notresponsiblefor,andnoexpressorimpliedwarranty, shall
DECKING INSTALLATION : I-SERIES 21
bedeemedtocover,anyProductfailure,Product malfunction,damageorconditionattributableto: 1� ImproperinstallationoftheProductand/orfailure toabidebytheinstallationguidelinesforthe Product; 2� UseoftheProductbeyondnormaluseandservice conditions,orinanapplicationnotrecommended bytheProductguidelinesorinstallation 3� Movement,distortion,collapseorsettlingofthe groundorthesupportingstructureonwhichthe Product is installed; 4� Anyaneventofforcenature,includinganyactof God(suchasflooding,hurricane,earthquake,wind, hail, tornado, lightening, etc�); 5� Anyenvironmentalcondition,including,butnot limitedto,airpollution,andmoldandmildew (exceptasexpresslyprovidedotherwiseinthis Limited Warranty for stain resistance); 6� Anystainingordiscolorationfromforeign substances, including, but not limited to, food, beverages,dirt,grease,oil,paint,coatingmaterials, chemicalsubstances,andcleanersnotapprovedfor useintheFortressDeckCleaningandCareGuide (exceptasexpresslyprovidedotherwiseinthis Limited Warranty for stain resistance); 7� Any staining or damage to the Product caused by abrasivecompoundsofacidicorbasicpH, paintsorstains,solvents,metallicrustorother abnormal deck use items, and non-food and non-beveragesubstances,including,butnotlimited to,biocides,fungicides,plantfoodorbactericides, motoroilandsuntan/sunscreenlotions; 8� Normalweathering(definedasnatural efflorescence,exposuretosunlight,weatherand atmosphericconditionswhichcausesanycolored surface to gradually fade, chalk, accumulate dirt or stains)andvariationsorchangesincolor of the Product;
22 DECKING INSTALLATION : I-SERIES
9� Any fading or staining not on the surface of the Product (i�e�, the underside or ends of the Product); 10� Improperhandling,maintenance,upkeep,storage, abuse, neglect, or misuse of the Product by Purchaser,anytransfereeorthirdparties; 11� Exposuretoexcessiveheatsources(directlyor indirectly),including,withoutlimitation,fire, reflectedsunlightfromlow-emissivity(Low-E)glass or other enhanced or concentrated solar reflectivity; 12� Fabricationorre-manufacturingbyPurchaser, transfereeorthird-parties; 13� Ordinarywearandtear,scratchingorscuffing;and 14� Impactfromobjects.
Inaddition,thisLimitedWarrantywillbevoidedif(1)paint,stainorothercoatingmaterialsareappliedtotheProduct,or(2)thesurfaceoftheProducthasbeendamagedorpuncturedasaresultoftheuseofametalshovelorothersharp-edgedtool.Suchtoolsarenotbeusedtoremovesnow,ice,orotherdebris from the surface of the Product�
THISLIMITEDWARRANTYSHALLNOTCOVER,ANDFORTRESSDECKSHALLNOTBERESPONSIBLEFOR,COSTSANDEXPENSESINCURREDWITHRESPECTTOTHEREMOVALOFDEFECTIVEPRODUCTORCOMPONENTS,ORTHEINSTALLATIONOFREPLACEMENTPRODUCTORCOMPO-NENTS,INCLUDING,BUTNOTLIMITEDTO,LABOR,FREIGHTORTAXES.5. Warranty Claim Procedure: To make a claim under this Limited Warranty, Purchaser or thetransferee,shallsendadescriptionandphotographsof theclaimeddefectorcoveredcondition,proofof purchase,and,iftheclaimrelatestothelimitedwarranty onstainresistance,proofofcompliancewiththe requirementssetforthaboveunderSection2(b)“Stain
DECKING INSTALLATION : I-SERIES 23
Resistance,”tothefollowing: FortressBuildingProducts,LLC 1720 N� 1st St� Garland,Texas75040 1-866-323-4766 Email:warranty@fortressdeck.com
AllclaimsrelatingtothelimitedwarrantyonstainresistancemustbereceivedbyFortressBuildingProductswithin30-daysaftertheprofessionalcleaningwascom-pletedasprovidedundertherequirementssetforthaboveunderSection2(b)“StainResistance.”AllotherclaimsmustbereceivedbyFortress BuildingProducts within 30-days of anydiscoveryofapossibledefectornon-conformingcon-dition,butinnoeventaftertheexpirationofthewarrantyperiod.
Uponconfirmationofavalidclaimhereunder,FortressBuildingProducts,atitssoleoption,will:(1)provideanauthorizedrepairofthedefectiveProduct;(2)replacethedefectiveProduct;or(3)refundaportionofthepurchasepricepaidbythePurchaserforsuchdefectiveProduct(notincludingthecostofitsinitialinstallation).Replacementmaterialwillbeascloseaspossibleincolor,designandqualitytotheoriginalmaterialasreasonablypossible,inFortress BuildingProductsdiscretionanddetermination,but Fortress Fortress BuildingProducts does not guarantee an exact match as colors and design may change�Ifavalidclaimhereunderismade,recoverywillbeproratedinac-cordance with the Prorated Limited Warranty Schedule for ResidentialApplication(forResidentialApplicationclaims)ortheProratedLimitedWarrantyScheduleforCommercialApplication(forCommercial Applicationclaims),bothofwhich are set forth below� If Fortress BuildingProducts is providingreplacementmaterials,Fortress BuildingProd-ucts mayelecttoreplacetheapplicablepercentagelistedbelow of the Product that otherwise meets the
24 DECKING INSTALLATION : I-SERIES
0-56789
1011121314
100%97%92% 87%82%77%72%67%62%57%
Years Since OriginalPurchase Date
Recovery
Prorated Limited Warranty Schedule for Residential
Application
151617181920
21-25
52%47%42%37%32%27%25%
0-56789
10
100%80%60% 40%20%10%
Years Since OriginalPurchase Date
Recovery
Prorated Limited Warranty Schedule for Commercial
Application
6. No Other Warranties:THISLIMITEDWARRANTYCOMPRISESFORTRESSFortress BUILDINGPRODUCTSENTIREWARRANTYANDFORTRESSDECKMAKESNOOTHERWARRANTIES(ORALORWRITTEN)ANDDOESNOTAUTHORIZEANYOTHERENTITY,PERSONORAGENTTOMAKEANYOTHERWARRANTIESONITSBEHALF,ORTOMODIFY,EXPANDORADDTOTHISLIMITEDWARRANTY.ALLOTHERWARRANTIES,WHETHEREXPRESSORIMPLIED,INCLUDING,BUTNOTLIMITEDTO,ANYIM-PLIEDWARRANTIESOFMERCHANTABILITYORFITNESSFORAPARTICULARPURPOSEAREEXPRESSLYDISCLAIMED.
requirements for a claim; or if Fortress BuildingProducts isrefundingthepurchaseprice,FortressDeckmayelecttorefundtheapplicablepercentagelistedbelowoftheorigi-nalpurchasepriceoftheProductthatotherwisemeetstherequirements for a claim�
DECKING INSTALLATION : I-SERIES 25
ALLIMPLIEDWARRANTIES,INCLUDINGWARRANTIESOF MERCHANTABILITYANDFITNESSFORAPARTICULAR PURPOSE,NOTEFFECTIVELYDISCLAIMEDORPROHIBITED BYAPPLICABLELAWFROMBEINGDISCLAIMED,ARE LIMITEDTOTHEAPPLICABLESTATUTEOFLIMITATIONS ANDINNOEVENTWILLEXTENDBEYONDTHEAPPLICABLE WARRANTYPERIOD. UNDERNOCIRCUMSTANCESHALLFORTRESSDECKBE LIABLEFORANYCONSEQUENTIAL,SPECIAL,OR INCIDENTALDAMAGESARISINGOUTOFORCONNECTED WITHTHEPURCHASEORUSEOFTHEPRODUCTOR FORANYBREACHOFWARRANTY,ANDFORTRESSDECK’S LIABILITYWITHRESPECTTOAPRODUCTDEFECTSHALL INNOEVENTEXCEEDTHEREPLACEMENTOFSUCH PRODUCTORREFUNDOFTHEPURCHASEPRICE, ASDESCRIBEDABOVE.
SomeStates(orProvinces)donotallowlimitationsonhow longanimpliedwarrantylastsand/ortheexclusionor limitationofincidentalorconsequentialdamages,sothe abovelimitationsorexclusionsmaynotapplytoYou.This warrantygivesYouspecificlegalrights,andYoumayalso haveotherrightsthatvaryfromStatetoState(orProvince toProvince).7. Choice of Law: ThisLimitedWarrantyshallbegovernedbyandconstrued in accordance with the laws of the State of Texas, without regardtoconflictoflaws.Anylegalactionarisingoutof thisLimitedWarrantyshallbelitigatedandenforcedunder thelawsoftheStateofTexas.Inaddition,thepartiesto this Limited Warranty agreement agree to submit to the jurisdictionofthecourtsoftheStateofTexas,andthat anylegalactionpursuedhereundershallbewithinthe exclusivejurisdictionofthecourtsinthe State of Texas, U�S�A�
26 DECKING INSTALLATION : I-SERIESTERRASSE EN COMPOSITE I-SERIES
INSTRUCTIONS D’INSTALLATION
DECKING INSTALLATION : I-SERIES 27
INTRODUCTION
VEUILLEZ LIRE TOUTES LES INSTRUCTIONS AVANT DE COMMENCER
L’INSTALLATION
Limites des directives Ceguided’installationnes’appliquequepourlaI-Series.Lapersonneutilisantcesdirectivesdevraitdéjàavoirunecompréhensionglobaledespra-tiquesdeconstructiond’uneterrasse. Lesterrassesdoiventêtreconstruitesconformémentauxnormesetcodesdubâtimentenvigueur.
Ilincombeàl’installateurdeseconformeràtouslescodesetrègle-mentsdesécuritéetd’obtenirtouslespermisdeconstructionnécessaires. L’installateurdelaterrasseetdelarampedoitdéterminerlestech-niquesd’installationappropriéespourchaquesituation.FortressBuildingPro-ductsetsesdistributeursnesontpasresponsablesdesinstallationsincorrectesou dangereuses� Cesdirectivesontétépenséespourvousaideravecl’installationdelaI-Seriesetpourvousconseillersurlesexigencesd’installationpropresàceproduit.
Remarque : • L’espacementdessolivespourlesprofilsI-Seriespeutatteindre16po
(406,5mm)àpartirducentredanslaplupartdesinstallationsrésiden-tielles.Dépassercettemesurepourraitmettreatténuerlerendementdevotreterrasse.
• Dessolivesdoublesdoiventêtreutiliséespourtouslesjointsd’about.Assurez-vousquetoutesdesattachesdissimuléessontinstalléesdansledernierpouce(25,5mm)desplanchesdeterrassedelaI-Series.
• Lesplanchestransversalesperpendiculairesauxautresplanchesdelaterrassedoiventêtreutiliséescommejointsd’aboutpourcontrôlerl’expan-sionetlacontractiondelaterrasseI-Series.
Lesplanchesfixéesparledessusdoiventl’êtreàexactement
11/4po(31,75mm)detoutreborddelaplanche. • Lesespacesd’expansionsontnécessairesauxdeuxbouts.Celapermet
aumatérield’effectuernaturellementsonexpansionetsacontractionsansproblème.
28 DECKING INSTALLATION : I-SERIES
Outils nécessaires
Lunettesdeprotection
Perceuse
Rubanàmesurer
NiveauÉquerre triangulaire
Scieàonglets
Embout de vissageT-20
Embouthorizon-tal KX1 50 HULK
Porte-embouts Foretdeperceuse:5/32
(3,97 mm)
Crayonàmine
Gantsdesécurité
Masqueanti-poussières
Aspirateur
Normes Avantd’entamerl’installationdetoutproduitFortress BuildingProduct,assurez-vousqu’elleestconformeaux normesetcodesdubâtimentenvigueuràvotreemplace ment.Assurez-vousdesuivrelescaractéristiquesdufabric antdumatériel.Lorsquelesnormesdufabricantetlecode dubâtimentdiffèrent,respecterlescodesdubâtiment. Vérifiezqueleproduitquevousavezchoisiestlebonchoix pourl’utilisationquevousenferez. Pourdeplusamplesrenseignementsetensavoirplussur lescaractéristiquesdeproduits,visitezlewww.fortressbp. vcom.
Balaiàpoilsraides
Terrasse Fortress : Options d’installation de planches I-Series
PRÉ-INSTALLATION
Planche de terrasse àrainures
Plancheàreborddroit
Planche de terrasse initiale
12po(305 mm)
Planche de rebord
8po(203 mm)
Planche de rebord/Contremarche
DECKING INSTALLATION : I-SERIES 29
Lunettesdeprotection
Gantsdesécurité
Masqueanti-poussières
Balaiàpoilsraides
• Toujoursporterl’équipementdeprotectionindividuelle (EPI)approprié.Respectertouslesrèglementsetlois locauxsurlasantéetsécurité.
• Consultezlesfichesdedonnéesdesécurité(FDS). • Travaillerdansunendroitbienaéré. • Conserverunestationdetravailpropre. • LacoupedeproduitsI-Seriesproduitdefinesparticules. • Lesplanchesdeterrasseayantétécoupéespourraient
avoirdesrebordstranchants(particulièrementlescoupes avecsciesàonglets).
Entreposage et manutention • Lesplanchessontoffertesenpaquetspourdesraisonspra tiques,ellespeuventdoncêtrelourdes.Faireattention
lorsquevoussoulevezlesplanches,pourlesplacersur despalettessurélevéesoulesenretirer.Plusd’uneper sonnepourraitêtrenécessairepoursouleverlesplanches, selonleurlongueuretlenombredeplanchesdansunpa quet�
• Lorsdelamanipulationdeplanchesdeplusde12pi (3658mm),s’assurerquelesdeuxboutssontsoulevésen mêmetemps,defaçonconstante.Souleverlesplanches à3pi(915mm)dechaqueboutpouravoirdavantagede contrôle.
• Manipulerlesplanchesavecsoin.Échapperlesplanches (ettoutesleschargesd’impactengénéral)peutendom magerleprofildesplanches.
• Lorsdutransport,utiliserdesprotecteursdecoinssides sanglessontnécessaires.
• Touteslescomposantesdevraientêtrerecouverteslors qu’ellessontentreposées.
• L’entreposagedesplanchesdoitsefairesurunepaletteou uneautresurfaceplateenmesuredesoutenirtoutela longueurdechaquecomposante.
• Aucunedescomposantesnedevraitêtredansl’eauouune substance similaire�
• Éviterdesuperposertropdeproduitsoudelessuperposer defaçoninégale.
Aspirateur
Sécurité Outilsrecommandés:
30 DECKING INSTALLATION : I-SERIES
Plan • Évaluerl’emplacementdeconstructionets’assurerquele
produitestadaptéàl’utilisationprévue. • Déterminerleslongueursappropriéespourleprofilchoisi.
Celadépendradevotreutilisationetdelaclassedecharge pourvotrerégion.Leslongueurssuggéréessontfournies selonlesscénariosrésidentielstypiques.
• Élaborerunpland’entretienpourassurerlalongévitédu système.Ildevraitprendreencompteledrainage,lacorro sionetlavégétationsouslaterrasseetautourd’elle.
Préparation de l’emplacement • S’assurerd’undrainageadéquatsousl’assisedelaterrasse. Éviterl’accumulationd’eauetl’érosion. • Retirerlavégétationsousl’assisedelaterrasseetplacerla
membranegéotextilepourprévenirlarepousse.
Profil de planche de terrasse
DescriptionLargeur duprofil(po[mm])
Hauteur duprofil(po[mm])
Longueur duprofil(po[mm])
Poids (lb/pi)
Longueurs maximales (po[mm])
53/8po(136 mm)
51/2po(140 mm)
53/8po(136 mm)
113/4po(299 mm)
71/4po(184 mm)
1po(25 mm)
1po(25 mm)
1po(25 mm)
11/16po(18 mm)
5/8po(16 mm)
144po,192po,240po
(3 658 mm, 4 877 mm, 6 096 mm)
240po(6 096 mm)
192po(4 877 mm)
144po(3 658 mm)
144po(3 658 mm)
16po(407 mm)
16po(407 mm)
16po(407 mm)
N/A
N/A
1,57lb/pi
1,57lb/pi
2,01lb/pi
4,6lb/pi
2,55lb/pi
Planche de terrasse àrainures
Plancheàreborddroit
Planche de terrasse initiale
Planche de rebord12po
(305 mm)
8po(203mm)Planche de rebord/
Contremarche
DECKING INSTALLATION : I-SERIES 31
EXPANSION & CONTRACTION
Acclimater les planches L’installationpeutsefairesurplusieursjours,menantàdes
températuresd’installationvariables,selonl’emplacementduprojet.Lesplanchespeuventalorsdisposerdetempératuresderéchauffementetderefroidissementdifférentes.
Permettreauxplanchesdes’acclimatersurplace24heures
avantd’installer. Unefoisquel’installationestterminée,attendreavantde
couperleboutdesplanchesinstalléesàlalongueurdésirée.Decettefaçonlesplanchesserontcomplètementacclimatéesau site�
TelquemontrédanslaFig.1.
32 DECKING INSTALLATION : I-SERIES
Planches transversales Lesplanchestransversalesouplanchesdebord(placéesà90°
durestedelaterrasse)peuventêtreutiliséespourcréerunre-bordautourdelaterrasseetpouraideràcontrôlerl’expansionetlacontraction.
Lesfixationsdoiventserviràsoutenirlesplanchestransver-sales.Unespacementmaximalde16po(407mm)àpartirducentre.Laplanchetransversaledevraêtreinstalléeparlehautauxfixationsàl’aidedevispourcomposite.
TelquemontrédanslaFig.2. Remarque : • Utiliseruneplanchetransversaleentrelesplancheslon
guespouraideraveclacontractionetl’expansion. Cetteapprocheajouteégalementl’avantagedecréerune
esthétiqueplusagréableàl’œil. ConsulterlasectionSupportsetlongueursàlapage14. • Lesplanchestransversalesdoiventêtresoutenuespardes
solivesoufixations. • Lorsquedesplanchestransversalesnepeuventpasêtre
installées,dessolivesdoublesdoiventêtreinstalléespour soutenirlesjointsd’about.Utiliseraumoinsdeuxattaches parsolives,àdistanceégaleetaumoins11/4po(32mm) depuistoutreborddesplanches.
• Lalongueurdessolivesdoitêtremodifiéesilesplanches sontinstalléesendiagonale.
Fig. 2
20` Deck Board
WA
LLWA
LL
1/8” Gap
1/8”Gap
20` ( with expansion at 1/8” per side)
Estimated expansion allowance between 2 fixed points in a cooler climate.
Blocking Blocking
Breaker Board
Planchetransversale
Fixation
Solive
Fig. 1MUR
MURAU
MUR Planche de terrasse de
20pi(6096mm)
Espaced’expansionestiméeentre2pointsfixesdansunclimatplusfrais(50F-10C) ci-dessous�
20po(6096mm)(avecexpansionde1/8po[3 mm] parcôté)
Planche transversaleEspacede1/8po(3mm)Espacede1/8po(3mm)
VUE DE HAUT
DECKING INSTALLATION : I-SERIES 33
Plusieurs longueurs de planches consécutives (VUE DE HAUT)Espaced’expansionallouépourlesdifférencesdelongueurentrelesplanches
Breaker Boards
FIXEDWALL
FIXEDWALL
Expansion Gap
Single Board Lengths
Expansion Gap
Joist Blocking
Multiple board lengths placed consecutivelyExpamsion gap provided for the change in length of both boards.
Expansion Gap
Double joist on butt joins
Expansion Gap
FIXEDWALL
FIXEDWALL
Original length
Code Compliant gapCode Compliant gap
Maximum allowable expansion point
Code compliance:When installing against vertical structures, allow for both the code required spacing and the required expansion gap to ensure board remain code compliant after board expansion.
Fig. 4
Conformité aux normes Lorsdel’installationsurdesstructuresverticales,alloueràla
foisl’espacenécessairepourlaconformitéauxnormesetceluipourl’expansionafindevousassurerquelesplanchesde-meurentconformesauxnormesaprèsleurexpansion.
TelquemontrédanslaFig.5.
Espaced’expansion Espaced’expansion
Doublessolivessurlesjointsd’aboutBreaker Boards
FIXEDWALL
FIXEDWALL
Expansion Gap
Single Board Lengths
Expansion Gap
Joist Blocking
Multiple board lengths placed consecutivelyExpamsion gap provided for the change in length of both boards.
Expansion Gap
Double joist on butt joins
Expansion Gap
FIXEDWALL
FIXEDWALL
Original length
Code Compliant gapCode Compliant gap
Maximum allowable expansion point
Code compliance:When installing against vertical structures, allow for both the code required spacing and the required expansion gap to ensure board remain code compliant after board expansion.
Fig. 5
Espaceconformeaux normes
Espaceconformeaux normes
Longueuroriginale
Pointd’expansionmaximalpermisMur fixe
Mur fixe
VUE DE HAUT
INSTALLATION : ATTACHES
Conseils d’installation :
Clous Attaches Perceuse
Fig. 3
Breaker Boards
FIXEDWALL
FIXEDWALL
Expansion Gap
Single Board Lengths
Expansion Gap
Joist Blocking
Multiple board lengths placed consecutivelyExpamsion gap provided for the change in length of both boards.
Expansion Gap
Double joist on butt joins
Expansion Gap
FIXEDWALL
FIXEDWALL
Original length
Code Compliant gapCode Compliant gap
Maximum allowable expansion point
Code compliance:When installing against vertical structures, allow for both the code required spacing and the required expansion gap to ensure board remain code compliant after board expansion.
Une seule longueur de planches (VUE DE HAUT)
Mur fixe
Solive Fixation
PlanchestransversalesEspaced’expansion Espaced’expansion
Mur fixe
34 DECKING INSTALLATION : I-SERIES
• Uneperceuseavecdesajustementsdecoupleréglables estrecommandée.
• Percerdansdestempératuresdemoinsde40°F(5°C). • Latailledutroupercéàl’avancedevraitcorrespondreau
pluspetitdiamètredelavis.• Consulterlefabricantdesattachespourlatailledestrousà
percerd’avance. • NE PASfairedetrousàl’avancedanslasous-structureen
bois�Pose des planches • L’installationdesplanchesI-Seriesestcomparableàcelle
d’autresplanchesdeterrasseencompositeoupas. • LesprofilsI-SeriesNE SONT PASconçuspourservirde
structure� • Lasurfacedépassantlaterrassenedoitpasdépasser
11/4po(32mm),prendreenconsidérationl’épaisseurde laplanchederebordouladécoration.
• Lessurfacesréfléchissantes(parexemple,lesverresàfaible émissivitéoulerevêtementmétallique)pourraientavoir desrépercussionssurl’indiceUVoul’accumulationde chaleursurlaterrasse.Cesfacteurspourraientavoirdes effetsinattendussurlesmatériauxdelaI-Series.
Gardezcesfaitsentêtelorsdelaconceptiondevotreter rasse�
• Garderundégagementau-dessusdusolpourpermettre uneventilationadéquate.
Laventilationpeutégalementaiderl’expansionetla contraction.TelquemontrédanslaFig.1.
Fig. 1 Lesespacesentrelesplanchesdeterrasseaidentàlaventilation.
Lacondensationetl’évapora-tionsefontnaturellement.Scellercomplètementune
terrassepourraitdonccréerunenvironnementconstammenthumidequipourraitendomma-gerlasous-structureet,àlong
terme,votreterrasse.
Uneterrassebienventiléepermetledéplacementd’airetaideàéliminerlesurplusd’humidité
dansl’air.
Unespacede11/2po(38mm)souslaterrasseestnécessairepouruneventilationsupplémentaire.
VUE DE HAUT
• NE PASutiliserdeclouspourfixerlesplanchesI-Series. • UtiliserdesattachesHULKdehautequalitéadaptéespour
laduréedeviedelaterrasseetlesconditionsatmosphé riques du site�
• LesplanchesI-Seriesnécessitentdeuxpointsd’attacheparsolive.
• Fixerà11/4po(32mm)detoutreborddelaplanche.
DECKING INSTALLATION : I-SERIES 35
Points d’attache avec planches à rebords rainurés LeprofildelaplanchedeterrasseinitialeI-Seriespeutêtreuti-
lisépourborderlaterrasse.Ellen’estrainuréequed’uncôtéetaunfinidroitdel’autrecôté.
• Cesplanchesdepérimètredoiventêtreinstalléesparle hautàl’aidedevispourterrasseencompositedecouleur assortie.
• Lesvisdoiventsetrouverà11/4po(32mm) de tout re bordduprofilI-Series.
• UtiliserlesattachesdissimuléesHULKentrelesprofilsde
terrasse� TelquemontrédanslesFig.2,3et4. Remarque : NE PASenfoncerlavistroploindanslasurfacedelaterrasse. LesplanchesdeterrassesI-Seriesnesontpaspleinesetont
descavitésquipourraientêtrecompromisessilecoupledevotreperceuseesttropélevé.
Fig. 2
Planchedeterrasseàrainures
Planchedeterrasseinitiale
Visd’installationparle haut
AttachedissimuléeHULK
Planche de ter-rasseàrainures
Planche de ter-rasseinitiale
VUE DE HAUT
VUE DE CÔTÉ
Fig. 3 VUE DE CÔTÉVUE DE
HAUT
Visd’installationparlehaut
Plancheàreborddroit
Plancheàrebord droit
Planchedeterrasseàrainures
Planche de ter-rasseàrainures
36 DECKING INSTALLATION : I-SERIES
INSTALLATION : DIRECTIVES DE COUPE DES PLANCHES SUR LE LONG
Directives d’installation par le haut pour planches coupées sur le long
• Lesplanchespeuventêtreinstalléesavecdesvisparle hautdanscertainescirconstances,particulièrementlors qu’ellesontétécoupéessurlelong.
• Uneseulerangéed’attacheslongitudinaleestsusceptible
depivoteretdevenirdangereuse. • Touteslesplanchesdoiventavoirdeuxattachesàtoutes
lessolives.Pourêtrefixéessolidementaucadre,elles doiventavoirsoitdeuxattachesHULK,uneattacheHULK etunevispourcompositeoudeuxvispourcomposite.
TelquemontrédanslaFig.1. • Touteslesvisd’installationparlehautdoiventêtreplacées
à11/4po(32mm)dureborddelaplanche. Fig. 1
Final ProductRip Cut
Incorrect CorrectVUE EN COUPE
Fig. 4
CORRECTINCORRECT
VUE DE COUPE
Placement idéal pour les vis
Espacede7/8po(23mm)à13/16po(30 mm)Espacede2po(51mm)à23/16po(58,5 mm)Espacede3po(76mm)à43/8po(105 mm)
Lescoupessurlelongdoiventéviterlesmanchonsou«pieds»delaplanche.Lafigure2illustrelesdifférentesfaçonsdecouperuneplanchesurlelongetdelafixerafindepréserverl’intégritédevotreterrasse.
DECKING INSTALLATION : I-SERIES 37
Remarque : • Lalargeurminimaledeplancheaprèslacoupeestde
21/2po(63mm). • Ilestrecommandédecouperlesplanchesàl’enverssur
votresciesurtableafindevoirl’emplacementexactdela lameparrapportauxpiedsdelaplanche.
Fig. 2
COUPESURLELONG
PRODUITFINAL
VUE EN COUPE
• Lorsquepossible,siuneplancheI-Seriesaétécoupée,pla-cerlapartiecoupéeverslesautresplanchesdelaterrasseafinqu’elleluiservederebord.
• Nejamaisfixeràtraversdumanchonou«pied»desplanchesI-Seriesafind’éviterqu’ellescraquent.
TelquemontrédanslaFig.3.
Fig. 3
CORRECTINCORRECTVUE EN COUPE
Couper • LesplanchesI-Seriesnedevraientpasêtrecoupéesà
moins de 2 1/2 po (63 mm). • Sic’estnécessaire,couperlapremièreetladernière
plancheI-Seriespourqu’elless’ajustentàvotreespace d’installation.
• Utiliseraumoinsdeuxattachesparsolives,àdistance égaleetaumoins11/4po(32mm)depuistoutreborddes planches.
38 DECKING INSTALLATION : I-SERIES
Fig. 4
Doublessolives=Jointsd’about Fixations=Planchestransversales
Fig. 616po(407mm)d’espaceàpartirducentrepourlesplanchesdeterrasseà90 o
12po(305mm)d’espaceàpartirducentrepourlesplanchesdeterrasseà45 o
90o
16po(407 mm)
45o
12po(305 mm)
Espacementdessolivespourlesplanchesrainuréesetàreborddroitplacéesàangle
90o 60o 45o 30o
16po(407 mm)
12po(305 mm)
14po(356 mm)
8po(203 mm)
VUE DE HAUT
Fig. 5 VUE DE HAUT
Solive
Attachedissimulée Visséparlehaut
Planches in-termédiaires
Premièreplanche
Dernièreplanche
Aumoins11/4po(31,75mm)pourchaquerebord.
Remarque :Ilpourraitêtrenécessairedepercerlestrousàl’avancepourvisserparlehaut.
Dépassede11/4po(32 mm) max�
• Lesplanchespeuventêtrecoupéesavecunescieàonglet. Pourlesplanchescoupées,utiliserdeuxattachesdistri buéeségalementetàaumoins11/4po(32mm) de tout rebord� NE PAS couperlesplanchesàlatoupie.
Supports et longueurs • Lechoixdematériaustructurelinfluenceraladuréedevie
delaterrasse.S’assurerquelescodesdubâtimentlocaux sontrespectés.
• Lesplanchesnedoiventpasdépasserdeplusde11/4po (32 mm).Unsupportsupplémentaireestnécessaire, commemontrédanslafig.4,5et6.
DECKING INSTALLATION : I-SERIES 39
ENTRETIEN
NETTOYER VOS PLANCHES DE TERRASSECedontvousaurezbesoin
Savon Seaud’eauEau Éponge Boyauàhautepres-sionavecbuseàjeten
éventail
Balaiàpoilsraides
ÉTAPE 1 :Appliquerdel’eausavonneuseàvotreterrasseavecune éponge.ÉTAPE 2 :Répartirleliquidesurlaterrasseàl’aidedubalaiàpoils raides,vousassurerderetirertoutelasaletéetlesrésidus danslesespacesentrelesplanchesdeterrasse.Ilestpré férabledebalayerdanslesensdugrain.ÉTAPE 3 :Sidelasaletéoudesrésidussonttoujoursévidentssur votreterrasse,unboyauàhautepressionesttrèsefficace pourretirerlessouillurestenacesetlesdéchetsorga niquesinévitables.
REMARQUE :Utiliserunboyauàhautepressionavecunebuseàjetenéventaillargeenutilisantunepressiondemoinsde1500lb/po².Nepasoublierdegarderlabuseàaumoins12pi(300mm)delasurfacelorsdunettoyage.
Pourobtenirlesmeilleursrésultatspossible,utiliserleboyauàhautepressiontoutenbrossantlebalaiàpoilsraidesetl’eausavonneuse.Unnettoyageàpressionmensuelpermettraàvotreterrassedeconserversonapparencepropreetbienentretenue.
Demeurervigilantpuisquelenettoyageàpressionpeutendom-magervotreterrasse I-Seriess’iln’estpaseffectuécorrectement.Sivousremarquezdeschangementsàlasurfacedevotreterrasse,arrêtezimmédiatementetappelezFortress. *NE PASutiliserd’agentdenettoyagestandardpourcompositesur le I-Series�
40 DECKING INSTALLATION : I-SERIES
Entretien général • Nettoyerla I-Seriesdefaçonpériodiqueavecdesproduitsde
nettoyagemaisonordinaires. • Lespuissantsdétergents,oxydantsetacidesminéraux,
hydrocarburesaromatiquesouhalogénés,esters,étherset cétonesdoiventêtreévités.
• L’eau,lessolutionsaqueusessalines,lessolutionsdedé tergent,acidesdiluésetalcalissontacceptables.
• Afindes’assurerqueleproduitnettoyantn’endommagera paslaterrasse,enfairel’essaisurunesurfaceréduiteou unepiècedesurplusdela I-Series avant de l’utiliser.
• NEPASutiliserd’agentdenettoyagestandardpourcompo site sur la I-Series�
• Nettoyerlesmatièresrenverséesaussitôtquepossiblepouréviterqu’ellesnetachent.
• Certainsproduitschimiquesdansleschasse-moustiques etcrèmessolaires,l’huiledecertainesplantesetlechlore nondiluésontdessubstancesordinairesquipourraienten trerencontactavecvotreterrasseetnesontpascom patiblesavecsonrevêtementenHDPE(polyéthylènehaute densité).Empêchercessubstancesd’entrerencontact aveclesplanchesdevotreterrasseI-Series�
• Desarticlescommelestapisencaoutchoucetlesboyaux d’arrosagepeuventintroduiredesestersquipourraient affecterlasurfacedesplanchesdeterrassedelaI-Series dansletemps.Ilfautdoncenéviterl’expositionàlong terme.
• Detempsàautre,déplacerouretirerlesmeubles,tapis,potsdeplanteetautresaccessoiresafind’éviteruneusureinégale.
• LescollesàPVC,leciment,lapeinture,etc.peuventendom-mageroudécolorerlasurfacedelaterrasse.
• Unebrosseàpoilsraidespeutêtreutiliséepourretirerlarouilleoud’autrestachessimilaires.
• Lestachesparticulièrementtenacespeuventêtredoucementsablées.Ceprocédéretiredumatérieldelacoucheprotectriceetdoitêtreévitépuisqu’ilpourraitaffecterlasurfacedelaterrasse�
DECKING INSTALLATION : I-SERIES 41
• Lesdépôtsdeminérauxrésultantdel’évaporationdesolutionsàhauteteneurenselpeuventlaisserdestracesblanchessurlasurfacedelaterrasse.Lacauseprincipaledeceproblèmeestsouventlaqualitédel’eauoul’environnement.
Autantquepossible,ilestpréférabled’éviterdelaisserdel’eauàhauteteneurminérales’accumulersurlaterrasse.Cesrésiduspeuventêtrenettoyésàl’aidedesméthodesdécritesci-dessus.N’hésitezpasànouscontacterauinfo@fortressbp.comsivousavezbesoindeplusd’aide�
Glace et neige • Lesproduitsnormalementutiliséspourfairefondrelaneige
et la glace et contenant du chlorure de calcium ou du chlorure desodiumpeuventêtreutiliséssurlesplanchesdelaI-Series� Commementionnéprécédemment,ilspourraientlaisserdesrésidusblancssurlaterrasse.Cesrésiduspeuventtoutefoisêtrenettoyésàl’aidedesméthodesdécritesci-dessus.
• Nepasutiliserdepellesenmétalouautresoutilspointussurla surface de la I-Series�
Utiliserunepelleenplastiqueetdesoutilsarrondisoubiseau-téspourdéneigeroudéglacer.
• Larésistanceauglissementdelasurfaceseraréduitelorsquerecouvertedeglace,neigeouautresmatièressimilaires.Laprudenceestdemiselorsdecesoccasions.
Charge statique • Lesmatériauxàgrandepolaritédansunenvironnementsecet
àfaiblehumiditéaurontunechargepluspuissantelorsdelaséparationdesdeuxmatériaux.
• L’accumulationdechargestatiquepeutêtreréduiteenajou-tantunemiseàlaterreàlastructureouenaugmentantl’humiditédel’environnement,ouunecombinaisondesdeux.Lesdéchargesstatiquespeuventêtreévitéesdanscertainssecteurs(lespointsd’accèsparexemple)enyplaçantdestapisdemiseàlaterrepourcontrôledelastatique.
42 DECKING INSTALLATION : I-SERIES
GARANTIE
LaprésentegarantielimitéepourleproduitdeterrasseI-SeriesdeFortressBuildingProducts(«lagarantielimitée»)estofferteàl’acheteuroriginal(«l’acheteur»ou«vous»)duproduitFortressInfinityDecking(«leproduit»)deFortressDeckProducts,LLC(«FortressDeck»).Pourlesbesoinsdecettegarantielimitée,une«installationrésidentielle»désignel’installationduproduitpourunerésidenceunifamilialeetune«installationcommerciale»désignel’installationduproduitailleursquepourunerésidenceunifamiliale� 1. Performance du produit :
Chez Fortress Building Products, nous croyons en chaque pro-duit que nous vendons. Toutefois, il est normal que les produits de terrasse s’usent avec le temps. L’usure est normale pour un produit exposé au soleil, à la pluie et aux autres phénomènes naturels. Prédire la durée de vie d’un produit peut être diffi-cile puisque toutes les installations connaissent des facteurs d’usure différents. Le produit usera à une vitesse variable selon le climat, l’indice UV, la qualité de l’installation, son utilisation et plusieurs autres facteurs. Fortress Building Products vous offre cette garantie limitée, sujette aux modalités ci-après, pour vous offrir la paix d’esprit en cas d’un défaut de fabrica-tion qui entraînerait une défectuosité du produit, tel que décrit ci-dessous. Si, pour quelque raison que ce soit, le produit montre des indices de défectuosité, de dommages ou de dété-rioration, remplacer ou réparer le produit immédiatement pour prévenir les risques d’accident.
2. Couverture de la garantie : Garantie résidentielle limitée standard de 25 ans. Garantie commerciale limitée standard de 10 ans.
FortressBuildingProductsgarantieàl’acheteur,pourunepériodedevingt-cinq(25)ansàpartirdeladatedel’achatoriginalpouruneinstallationrésidentielleetpourunepériodededix(10)ansàpartirdeladated’achatoriginalpouruneinstallationcommerciale,queleproduit,utiliséetentretenunormalement,seraexemptdedéfautsdefa-bricationetneseséparerapas,neferapasd’échardes,nepourrirapasouneconnaîtrapasdedommagesstructurelsdusauxtermitesouàlapourriturefongique.
DECKING INSTALLATION : I-SERIES 43
Garantie limitée contre les taches et la décoloration pour une installation résidentielle :
FortressBuildingProductsgarantitàl’acheteurqueleproduitserarésistantauxtachesetàladécoloration,danslecadred’uneutilisationetd’unentretiennormaux,pourunepériodedevingt-cinq(25)ansàpartirdeladatedel’achatoriginalpouruneinstallationrésidentielleetselonlesmodalitéssuivantes: (A) Résistance à la décoloration La couleur du produitnesedécolorerapasàcausedelalumièreoudel’expositionàlanaturedeplusde5unitésDeltaE(CIE).Ilestimportantdenoterquequoiqueleproduitsoitconçupourrésisteràladécoloration,FortressBuildingProductsnelegarantitpascontretoutedécolorationpuisqu’aucunmatériaunepeutenêtrecomplètementàl’épreuvelorsd’uneexpositionauxrayonsUVetautresélémentsdelanature� (B) Résistance aux taches :Leproduitrésisteraauxtachespermanentescauséesparlesalimentsetboissonstrouvésnormalementsuruneterrasserésidentielle(p.ex.moutard,mayonnaise,saucebarbecue,boissongazeuseetcafé)yétantrenversé,ainsiqu’àlamoisissurenaturelledel’environnement,pourvuque:
1. Danslasemainesuivantlecontactentrel’aliment oulebreuvageetlasurfaceduproduitou,dansle casdelamoisissuredanslasemainesuivantl’ap paritiondecelle-ci,l’acheteurtentedenettoyerla surfacetouchéeaveclesprocéduresdenettoyage décritesdansleGuidedenettoyageetd’entretien desproduitsFortress(offertauwww.fortressdeck. com/ressource); 2. Silatacheestvisibledefaçondéraisonnableaprès avoireffectuélesprocéduresdenettoyagedécrites dansleGuidedenettoyageetd’entretiendes produitsFortress,l’acheteurdoitfairenettoyerla surfaceparunnettoyeurprofessionneldeterrasse àsesfraisdanslasemainesuivantlecontactentre l’alimentoulebreuvageetlasurfaceduproduitou, danslecasdemoisissure,danslasemainesuivant l’apparitiondecelle-ci;
44 DECKING INSTALLATION : I-SERIES
3. Si,aprèsavoireffectuélesdeux(2)étapesdécrites précédemment,latachedemeurevisibledefaçon déraisonnable,l’acheteurdoitaviserFortressDeck danslestrente(30)jourssuivantlenettoyagepro fessionnel�
FortressBuildingProductsnegarantitpasqueleproduitestrésistantauxtachesetn’offrepasdecouverturedegarantiepourlesalimentsetbreuvagesrenversésouappliqués,oupourlamoisissure,quinesontpasnettoyésrapidementetcorrectementconformémentauxdirectivesci-dessusetauGuidedenettoyageetd’entretiendespro-duitsFortress(offertauwww.fortressdeck.com/cleaning-surface).Deplus,puisquelamoisissurepeuts’installeretcroîtresurtoutesurfaceextérieure,ycomprisceproduit,vousdevezrégulièrementnettoyerleproduitetenretirerlasaletéetlepollenquipeuventalimenterlamoisissure.
Touteslesgarantiesetcouverturesinclusesdanslecadredecettegarantielimitéesontsujettesauxexclusions,limitesetrestrictionsdécritesdanslaprésente.
3. Transfert : Une(1)foisdanslescinq(5)anssuivantladated’achat originalparl’acheteurcettegarantielimitéepeutêtre transféréeàunacheteursubséquentdelapropriétésur laquelleleproduitaétéinstallé. 4. Exclusions à la couverture de la garantie : FortressBuildingProductsn’offrepasdegarantie(expresse ouimplicite)etnietouteresponsabilitédanslecasd’une défectuositéd’unproduit,dedommagesoud’unecondi tionattribuablesauxsituationssuivantes:
DECKING INSTALLATION : I-SERIES 45
1� Uneinstallationincorrecteduproduitoulerefusde respecterlesdirectivesd’installationduproduit; 2� Uneutilisationduproduitdépassantlesconditions d’utilisationetd’entretiennormalesouuneuti lisationnonrecommandéeparlesdirectivesdu produitousoninstallation; 3� Lemouvement,ladistorsion,l’écrasementou l’affaissementdusoloudelastructuredesupport surlaquelleleproduitestinstallé; 4� Toutévénementnaturel,ycomprislescatastrophes naturelles(commelesinondations,lesouragans, lestremblementsdeterre,levent,lagrêle,lestor nades, la foudre, etc�); 5� Toutesconditionsenvironnementales,notamment lapollutiondel’airetlamoisissure(saufdansles casexpliquésdanslaprésentegarantielimitéesous Résistanceauxtaches); 6� Toutestachesoudécolorationcauséespardes substances,notammentlesaliments,lesbreuvages, lasaleté,lagraisse,l’huile,lapeinture,lesmaté riauxderevêtement,lesproduitschimiquesetles nettoyantsnonapprouvésdansleGuidedenet toyageetd’entretiendesproduitsFortress(sauf danslescasexpliquésdanslaprésentegarantie limitéesousRésistanceauxtaches); 7� Tousdommagesoutachesauproduitcauséspar descomposésabrasifsacidesouàpHbasique, peinturesouteintures,solvants,rouillemétallique ouautressubstancesnesetrouvantpasnormale ment sur une terrasse ainsi que des substances non alimentaires, notamment les biocides, fongicides, alimentsvégétauxoubactéricides,huileàmoteur etcrèmesetlotionssolaires; 8� Levieillissementnormal(définicommeuneef florescencenaturelle,l’expositionausoleil,aux élémentsetconditionsatmosphériquesquientraî nerapourtoutesurfacecoloréeunedécoloration graduelle,unfarinage,uneaccumulationdesale téoudetaches)etlesvariationsouchangements decouleurduproduit;
46 DECKING INSTALLATION : I-SERIES
9� Toutesdécolorationoutachesailleursquesurla surfaceduproduit(p.ex.sousouauboutdupro duit); 10� Unmauvaisentreposage,entretienoumaintien,un abus,delanégligenceouunemauvaiseutilisa tionduproduitparl’acheteur,lebénéficiairedu transfertoudestiercesparties; 11� Uneexpositionexcessiveàdessourcesdechaleur (directement ou non), notamment, le feu, la lu mièredusoleilàtraversdeverresàfaibleémissivi téoutouteautreréflectivitésolaireaugmentéeou concentrée; 12� Lafabricationoudeuxièmetransformationpar l’acheteur,lebénéficiairedutransfertoudestierces parties; 13� L’usurenormale,leségratignuresouéraflures; 14� Lesimpacts.
Deplus,cettegarantielimitéeseraannuléesi(1)delapeinture,teintureouautrematériauderevêtementsontappliquésauproduit,ou(2)lasurfaceduproduitaétéendommagéeoutrouéeparl’utilisationd’unepelleenmétaloutoutautreoutilpointu.Cesoutilsnedoiventpasserviràretirerdelaneige,delaglaceoud’autresdébrisdelasurfaceduproduit.
CETTEGARANTIELIMITÉENECOUVREPASLESCOÛTSETDÉ-PENSESENTRAÎNÉSPOURRETIRERLEPRODUITOULESCOMPO-SANTESDÉFECTUEUX,OUPOURL’INSTALLATIONDUPRODUITOUDESCOMPOSANTESDEREMPLACEMENT,NOTAMMENTLAMAIND’ŒUVRE,LETRANSPORTETLESTAXES.FORTRESSDECKSEDÉ-GAGEDETOUTERESPONSABILITÉPOURCESCOÛTS.
5. Procédure pour réclamation de garantie : Poureffectueruneréclamationdanslecadredecettegarantielimitée,l’acheteuroulebénéficiairedutransfertdoitenvoyerunedescriptionetdesimagesdeladéfectuositéouconditionviséeparlaréclamation,unepreuvedeconformitéauxexigencesdécritesàlasection2(b)«Résistanceauxtaches»àl’adressesuivante:
DECKING INSTALLATION : I-SERIES 47
FortressBuildingProducts,LLC 1720 N� 1st St� Garland,Texas75040 1-866-323-4766 Courriel:warranty@fortressdeck.com
TouteslesréclamationsdanslecadredecettegarantielimitéeportantsurlarésistanceauxtachesdoiventêtrereçuesparFortressBuildingProductsdanslestrente(30)jourssuivantlenettoyageprofessionnel,conformémentauxexigencesdécritesdanslasection2(b)«Résistanceauxtaches»ci-dessus.TouteslesautresréclamationsdoiventêtrereçusparFortress BuildingProducts dans les trente (30) jours sui-vantladécouverted’unedéfectuositépossibleoucondi-tionnonconforme,maistoujoursavantl’expirationdelapériodedegarantie.
Aprèsconfirmationd’uneréclamationvalideenvertudelaprésente,FortressBuildingProducts,àsaseulediscrétion,pourra:(1)fourniruneréparationautoriséeduproduitdé-fectueux;(2)remplacerleproduitdéfectueux;ou(3)rem-bourserunepartieduprixd’achatpayéparl’acheteurpourceproduitdéfectueux(sansinclurelecoûtdesoninstalla-tioninitiale).Lesmatériauxderemplacementserontaussiprochesquepossibledefaçonraisonnabledelacouleur,ledesignetlaqualitédumatériauoriginal,àladiscrétiondeFortress BuildingProducts, mais Fortress BuildingPro-ductsnepeutgarantirunecorrespondanceparfaitepourlacouleuretledesignpourraitvarier.Siuneréclamationvalideenvertudelaprésenteestprésentée,lerecouvre-mentseraaccordéauprorataconformémentàlachartedeproratadegarantielimitépourinstallationrésidentielle(pourlesdemandesrésidentielles)oulachartedeproratadegarantielimitépourinstallationcommerciale(pourlesdemandes commerciales), toutes deux incluses ci-dessous� Si Fortress BuildingProductsfournitdesmatériauxderemplacement,Fortress BuildingProducts pourraitchoisirderemplacer,selonlacharteci-dessous,lepourcentageduproduitquirépondautrementauxexigencespouruneréclamation;ousiFortress BuildingProducts rembourse le prixd’achat,FortressDeckpourraitchoisirderembourser,selonlacharteci-dessous,lepourcentageapplicableduprixd’achatoriginalduproduitquirépondautrementauxexigencespouruneréclamation.
48 DECKING INSTALLATION : I-SERIES
0-56789
1011121314
100 %97 %92 % 87 %82 %77 %72 %67 %62 %57 %
Années depuis la date d’achat original
Recouvrement
Charte de prorata de garantie limité pour installation
résidentielle
151617181920
21-25
52 %47 %42 %37 %32 %27 %25 %
0-56789
10
100 %80 %60 % 40 %20 %10 %
Années depuis la date d’achat original
Recouvrement
Charte de prorata de garantie limité pour installation
commerciale
6. Aucune autre garantie :CETTEGARANTIELIMITÉECOMPRENDTOUTELAGARAN-TIE DE FORTRESSBUILDINGPRODUCTS ETFORTRESSDECKN’OFFREAUCUNEAUTREGARANTIE(ÀL’ORALOUL’ÉCRIT)ETN’AUTORISEAUCUNEAUTREENTITÉ,PER-SONNEOUAGENTÀOFFRIRD’AUTREGARANTIEÀSAPLACEOUÀMODIFIER,ÉTENDREOUCOMPLÉMENTERCETTEGARANTIELIMITÉE.TOUTEAUTREGARANTIE,EXPLICITEOUIMPLICITEESTDÉCLINÉEEXPRESSÉMENT,INCLUANTSANSS’YLIMITER,TOUTEGARANTIEIMPLICITEDEQUALITÉMARCHANDEOUD’ADAPTATIONPOURUNOBJECTIFPARTICULIER.
DECKING INSTALLATION : I-SERIES 49
TOUTESLESGARANTIESIMPLICITES,YCOMPRISLESGA RANTIESDEQUALITÉMARCHANDEOUD’ADAPTATION POURUNOBJECTIFPARTICULIER,N’ÉTANTPASDÉCLINÉES OUNEPOUVANTPASÊTREDÉCLINÉESCONFORMÉMENT ÀLALOI,SELIMITENTÀLALOISURLAPRESCRIPTIONET NEPEUVENTENAUCUNCASS’ÉTENDREAU-DELÀDELA PÉRIODEDEGARANTIEAPPLICABLE. ENAUCUNCASFORTRESSDECKNEPEUTÊTRETENURES PONSABLEDEDOMMAGESIMPORTANTS,SPÉCIAUXOU IMPRÉVUSCAUSÉSPARL’ACHATOUL’UTILISATIONDU PRODUITOULIÉSÀCELUI-CIOUÀTOUTEVIOLATIONDE GARANTIE.LARESPONSABILITÉDEFORTRESSDECKPOUR UNPRODUITDÉFECTUEUXNEPEUTJAMAISDÉPASSERLE REMPLACEMENTDECEPRODUITOULEREMBOURSEMENT DUPRIXD’ACHAT,COMMEDÉCRITCI-DESSUS. Certainsétatsnepermettentpasdelimitesurladurée d’unegarantieoul’exclusionoul’impositiondelimites pourlesdommagesaccidentelsouindirects/danscescas vouspourrieznepasêtreassujettisàceslimites. Cettegarantievousdonnedesdroitsspécifiques,mais vouspourriezdisposerd’autresdroitsselonl’étatoùvous habitez.7. Choix de loi applicable : Laprésentegarantielimitéeestconformeauxloisdel’état duTexasetgouvernéeparcelles-ci,peuimporteles conflitsdanslaloi.Toutepoursuitedanslecadredela présentegarantielimitéeserasoumiseauxloisdel’étatdu Texasetdisputédevantsestribunaux.Deplus,lesparties impliquéesparlaprésentegarantielimitéeacceptentde sesoumettreàlajuridictiondestribunauxduTexasetque toutepoursuiteintentéeenvertudelaprésentesefera danslestribunauxduTexas,auxÉtats-Unisd’Amérique.
PLATAFORMA COMPUESTA SERIE I
INSTRUCCIONES DE INSTALACIÓN
DECKING INSTALLATION : I-SERIES 51
Herramientas requeridas
Gafas
Taladro
Cintamétrica
NivelEscuadra rápida
Sierra de ingletes
Punta T-20paraatornillar
KX1-50 HULK H-Drive
Extensor de broca
Brocas:5/32
[3�97 mm]
LápizGuantesdeseguridad
MascarillaAspiradora
Normas AntesdeinstalarcualquierproductodeconstrucciónFortress,
asegúresedequelaaplicacióncumplaconlosreglamentoslocalesdeconstrucción.Asegúresetambiéndecumplirconlasespecificacionesdelfabricantedelosmateriales.Encasodequedifieranelreglamentodelfabricanteyelcódigodeconstrucción,guíeseporlosrequisitosdelcódigodeconstrucción.Revisequelosproductoselegidosseanadecuadosparalaaplicaciónquepretende.Sideseamayoresespecificacioneseinformessobrelosproductosvisitewww.fortressbp.com.
Escoba de cerdas duras
Plataformas Fortress: Opciones de instalación del tablón Serie I
PREINSTALACIÓN
Tablón ranurado de la plataforma
Tablón de borde cuadrado Tablón inicial de la plataforma
12ʺ[305 mm]
Tablóndelaplaca
8ʺ[203 mm]
Tablóndelaplacaopeldaño
52 DECKING INSTALLATION : I-SERIES
Gafas Guantesdeseguridad
Mascarilla Escoba de cerdas duras
• Usesiempreelequipoadecuadodeprotecciónpersonal(PPE).Cumplaconlasleyeslocalesdesaludyseguridadocupacionales.
• ConsultelaHojadeseguridaddedatosdeseguridaddemateriales(MSDS)correspondiente.
• Trabajeenunáreabienventilada. • Mantengalimpiasuáreadetrabajo. • CortarmaterialesdelaSerieIproducepartículasmuyfinas. • Lostablonescortadospuedentenerbordesfilosos(particularmenteen
cortes de inglete)�
Almacenamiento y manejo • Lostablonesvienenenpaqueteporcomodidadpero,porlomismo,
puedenresultarpesados.Tengacuidadoalalzarlos,colocarlosoretirarlosdepaléselevados.Podríanecesitarsemásdeunapersonaparaalzarlos,dependiendodelalongitudydelnúmerodetablonesdelpaquete.
• Almanejartablonesdelongitudmayora12pies[3658mm]asegúresedelevantarambosextremosalmismotiempoydeformapareja.Levantelostablonesde3pies[915mm]decadaextremoparatenermejor extremo�
• Manejelostablonesconcuidado.Sidejacaerlostablones(ycualquiercargadegranimpactoengeneral)puededañarlosperfiles.
• Duranteeltransporteuseprotectoresdelasesquinascuandosenecesiten correas�
• Todosloscomponentesdebenguardarsecompletamentebajocubierta. • Alalmacenartablonesdebeusarseunpaléounasuperficieplanapara
queseapoyecadacomponenteentodasulongitud. • Nodebedejarseningúncomponenteenaguaosustanciassimilares. • Eviteapilarenexcesoohacerloenformairregular.
Aspiradora
Seguridad Herramientasrecomendadas:
DECKING INSTALLATION : I-SERIES 53
Plan • Evalúeelsitiodeconstrucciónycompruebequeelproductosea
adecuadoparalaaplicaciónquepretende. • Determinelostramosadecuadosparaelperfilseleccionado.Esto
dependerádelaaplicaciónydelaclasedecargaenlaregión.Seofrecensugerenciasdetramosparalasposibilidadesresidencialestípicas.
• Elaboreunplandemantenimientoparaasegurarladuracióndelsistema� Esto debe de tomar en cuenta el drenaje, la corrosión y la vegetaciónpordebajoyalrededordelaplataforma.
Preparación del sitio • Asegúresedequehayadrenajeadecuadopordebajodelaplataforma.
Eviteelencharcamientodelaguaylaerosión. • Quitelavegetacióndelahuelladelaplataformaycoloquelatela
agrícolaadecuadaparaevitarquevuelvaacrecer.
Perfil del tablero de la plataforma
Descripción
Ancho delperfil(pulgadas
[mm])
Altura delperfil(pulgadas
[mm])
Longitud delperfil(pulgadas
[mm])
Peso (libras/pies)
Luzmáxima(pulgadas
[mm])
5-3/8ʺ[136 mm]
5-1/2ʺ[140 mm]
5-3/8ʺ[136 mm]
11-3/4ʺ[299 mm]
7-1/4ʺ[184 mm]
1ʺ[25 mm]
1ʺ[25 mm]
1ʺ[25 mm]
11/16ʺ[18 mm]
5/8ʺ[16 mm]
144ʺ,192ʺ,240ʺ[3658 mm, 4877 mm, 6096 mm]
240ʺ[6096 mm]
192ʺ[4877 mm]
144ʺ[3658 mm]
144ʺ[3658 mm]
16ʺ [407 mm]
16ʺ [407 mm]
16ʺ [407 mm]
N�D�
N�D�
1�57 libras/pies
2�94libras/pies
2�01 libras/pies
4�60 libras/pies
2�55 libras/pies
Tablón ranurado de la plataforma
Tablón de borde cuadrado
Tablón inicial de la plataforma
12ʺ[305mm]Tablóndeplaca
8ʺ[203mm]Tablóndelaplacao
peldaño
54 DECKING INSTALLATION : I-SERIES
INSTALACIÓN: EXPANSIÓN Y CONTRACCIÓN
𝛼𝛼 = 0.00002567
𝛼𝛼 =
∆𝐿𝐿 = 𝐿𝐿 + 𝐿𝐿 ∗ (𝛼𝛼 ∗ ∆𝑇𝑇)
∆𝐿𝐿 = 𝐶𝐶𝐶𝐶𝐶𝐶𝐶𝐶𝐶𝐶𝐶𝐶 𝑑𝑑𝑑𝑑 𝑙𝑙𝐶𝐶𝑙𝑙𝑙𝑙𝐶𝐶𝑙𝑙𝑙𝑙𝑑𝑑
𝐿𝐿 = 𝐿𝐿𝐶𝐶𝑙𝑙𝑙𝑙𝐶𝐶𝑙𝑙𝑙𝑙𝑑𝑑 𝑙𝑙𝐶𝐶𝑙𝑙𝐶𝐶𝑙𝑙
𝛼𝛼 = 𝐶𝐶𝐶𝐶𝑑𝑑𝐶𝐶𝐶𝐶𝐶𝐶𝐶𝐶𝑑𝑑𝑙𝑙𝑙𝑙𝑑𝑑 𝑑𝑑𝑑𝑑 𝑑𝑑𝑒𝑒𝑒𝑒𝐶𝐶𝑙𝑙𝑒𝑒𝐶𝐶ó𝑙𝑙 𝑙𝑙é𝑟𝑟𝐶𝐶𝐶𝐶𝐶𝐶𝐶𝐶
∆𝑇𝑇 = 𝐶𝐶𝐶𝐶𝐶𝐶𝐶𝐶𝐶𝐶𝐶𝐶 𝑑𝑑𝑙𝑙 𝑙𝑙𝑑𝑑𝐶𝐶𝑒𝑒𝑑𝑑𝑟𝑟𝐶𝐶𝑙𝑙𝑙𝑙𝑟𝑟𝐶𝐶
𝐿𝐿 = 20 𝑒𝑒𝐶𝐶𝑑𝑑𝑒𝑒
𝛼𝛼 = 0.00002567°F
∆𝑇𝑇 = 33°F
𝐿𝐿𝐶𝐶𝑙𝑙𝑙𝑙𝐶𝐶𝑙𝑙𝑙𝑙𝑑𝑑 𝐶𝐶á𝑒𝑒𝐶𝐶𝐶𝐶𝐶𝐶 = 20 𝑒𝑒𝐶𝐶𝑑𝑑𝑒𝑒 + 20 𝑒𝑒𝐶𝐶𝑑𝑑𝑒𝑒 ∗ (0.00002567°F ∗ 33°F) = 20.0169 pies
𝐿𝐿𝐶𝐶𝑙𝑙𝑙𝑙𝐶𝐶𝑙𝑙𝑙𝑙𝑑𝑑 𝐶𝐶á𝑒𝑒𝐶𝐶𝐶𝐶𝐶𝐶 = 240 𝑒𝑒𝑙𝑙𝑙𝑙𝑙𝑙𝐶𝐶𝑑𝑑𝐶𝐶𝑒𝑒 + 240 𝑒𝑒𝑙𝑙𝑙𝑙𝑙𝑙𝐶𝐶𝑑𝑑𝐶𝐶𝑒𝑒/𝑒𝑒𝐶𝐶𝑑𝑑𝑒𝑒 ∗ (0.00002567°F ∗ 33°F) = 240.203 pulgadas
𝐿𝐿𝐶𝐶𝑙𝑙𝑙𝑙𝐶𝐶𝑙𝑙𝑙𝑙𝑑𝑑 𝐶𝐶á𝑒𝑒𝐶𝐶𝐶𝐶𝐶𝐶 = 240 𝑒𝑒𝑙𝑙𝑙𝑙𝑙𝑙𝐶𝐶𝑑𝑑𝐶𝐶𝑒𝑒 + 240 𝑒𝑒𝑙𝑙𝑙𝑙𝑙𝑙𝐶𝐶𝑑𝑑𝐶𝐶𝑒𝑒/𝑒𝑒𝐶𝐶𝑑𝑑𝑒𝑒 ∗ (0.00002567°F ∗ −62°F) = 239.618 pulgadas
Aclimatación de los tablones Lainstalaciónpuededurarvariosdías,loquesignificatemperaturas
variablesy,dependiendodelsitiodelaobra,lostablonespuedenexperimentardiferentestasasdecalentamientoyenfriamiento.
Permitaquelostablonesseaclimatenenelsitiodurante24horasantesdeinstalarlos.Unavezterminadalainstalación,espereacortarlosextremosdelostablonesinstaladosalalongituddeseadaafindepermitirqueseaclimatenplenamenteenellugar.ComosemuestraenlaFig.1.
DECKING INSTALLATION : I-SERIES 55
Tablones rompientes Puedenusarsetablonesrompientesodeborde(tablonesdispuestosa
90°respectodelrestodelaplataforma)alrededordelaplataformaparaqueayudenacontrolarlaexpansiónycontracción.Senecesitaráusarbloquesparaapoyareltablónrompiente.Conunespaciadomáximode16ʺ[407mm]delcentro.Eltablónrompientenecesitarámontarseenlasuperficiesobrelosbloquescontornilloscompuestos.Comosemuestraenla Fig� 2�
Nota: • Coloqueuntablónrompienteentretabloneslargosparaqueayudea
controlarlaexpansiónycontracción.Esteenfoquetieneelbeneficioadicionaldecrearunaestéticavisualmásagradable.ConsultelasecciónSoportesytramosenlapágina14.
• Lostablonesrompientesdebenestarapoyadosenviguetasobloques. • Cuandonopuedanusarsetablonesrompientesdeberánusarseviguetas
doblesparaapoyarlostopes.Useporlomínimosdossujetadoresporvigueta,enpuntosequidistantesyaporlomenos1-1/4ʺ[32mm] de cualquier borde del tablón�
• Deberámodificarselaluzdelasviguetasenloscasosenquelostablones se instalen diagonalmente�
Fig. 2
20` Deck Board
WA
LLWA
LL
1/8” Gap
1/8”Gap
20` ( with expansion at 1/8” per side)
Estimated expansion allowance between 2 fixed points in a cooler climate.
Blocking Blocking
Breaker Board
Tablónrompiente
Bloque
Vigueta
Fig. 1MURO
MURO 20`[6096mm]Tablóndeplataforma
Unmargenestimadodeexpansiónentre2puntosfijosenunclimafrescoamenosde50°F(10°C).
20ʺ[6096mm](Conexpansiónde1/8ʺ[3 mm] porlado)
Tablón rompienteEspaciode1/8ʺEspaciode1/8ʺ
VISTA SUPERIOR
56 DECKING INSTALLATION : I-SERIES
Tablones de varias longitudes colocados en forma consecutiva (VISTA SUPERIOR)Sedejaunespaciodeexpansiónparaelcambiodelongituddeambostablones
Breaker Boards
FIXEDWALL
FIXEDWALL
Expansion Gap
Single Board Lengths
Expansion Gap
Joist Blocking
Multiple board lengths placed consecutivelyExpamsion gap provided for the change in length of both boards.
Expansion Gap
Double joist on butt joins
Expansion Gap
FIXEDWALL
FIXEDWALL
Original length
Code Compliant gapCode Compliant gap
Maximum allowable expansion point
Code compliance:When installing against vertical structures, allow for both the code required spacing and the required expansion gap to ensure board remain code compliant after board expansion.
Fig. 4
Cumplimiento de los códigos Alinstalarcontraestructurasverticales,consideretantoelespacio
requeridoporreglamentoyelespaciorequeridoparalaexpansión,paraasegurarsedequeeltablónsigacumpliendoconlosreglamentosaundespuésdeexpandirse.
ComosemuestraenlaFig.5.
Espaciodeexpansión Espaciodeexpansión
ViguetadobleenlostopesBreaker Boards
FIXEDWALL
FIXEDWALL
Expansion Gap
Single Board Lengths
Expansion Gap
Joist Blocking
Multiple board lengths placed consecutivelyExpamsion gap provided for the change in length of both boards.
Expansion Gap
Double joist on butt joins
Expansion Gap
FIXEDWALL
FIXEDWALL
Original length
Code Compliant gapCode Compliant gap
Maximum allowable expansion point
Code compliance:When installing against vertical structures, allow for both the code required spacing and the required expansion gap to ensure board remain code compliant after board expansion.
Fig. 5
EspacioquecumpleconelreglamentoEspacioquecumpleconelreglamento
Longitud original
Puntodeexpansiónmáximopermisible
Muro fijo
Muro fijo
VISTA SUPERIOR
INSTALACIÓN: SUJECIÓN
Consejos de instalación:
Clavos Sujetadores Taladro
Fig. 3
Breaker Boards
FIXEDWALL
FIXEDWALL
Expansion Gap
Single Board Lengths
Expansion Gap
Joist Blocking
Multiple board lengths placed consecutivelyExpamsion gap provided for the change in length of both boards.
Expansion Gap
Double joist on butt joins
Expansion Gap
FIXEDWALL
FIXEDWALL
Original length
Code Compliant gapCode Compliant gap
Maximum allowable expansion point
Code compliance:When installing against vertical structures, allow for both the code required spacing and the required expansion gap to ensure board remain code compliant after board expansion.
Longitudes de tablones sencillos (VISTA SUPERIOR)
Muro fijo
Vigueta Bloque
TablonesrompientesEspaciodeexpansión Espaciodeexpansión
Muro fijo
DECKING INSTALLATION : I-SERIES 57
Fig. 1
Lacondensacionesyevaporaciónsuceden naturalmente� Por lotanto,sellarlaplataformapuedeprovocarunambientecontinuamentehúmedoque
dañaríalasubestructuraloque,alargoplazo,podríadañarala
plataforma.
Elespacioentrelostablonesdelaplataformaayudaalaventilación.
Unaplataformadebidamenteventiladapermitequecirculeelaireyayudaadespejarel
exceso de humedad en el aire�
Serequiereunespaciode1-1/2ʺ[38mm]pordebajodelasuperficieparalaventilaciónadicional.
VISTA SUPERIOR
• NO USEclavosparasujetartablonesdelaSerieI. • UsesujetadoresHULKdealtacalidad,adecuadosparaladuracióndela
plataformaylascondicionesatmosféricasdellugar. • LostablonesdelaSerieIrequierendospuntosdesujeciónporvigueta. • Lospuntosdesujecióndebenestara1-1/4ʺ[32mm] del borde de los
tablones� • Serecomiendauntaladrodepotenciaajustable. • Taladrepreviamenteatemperaturaspordebajode40°F[5°C]. • Eltamañodelagujerotaladradopreviamentedebeserigualaldel
tornillodediámetromáspequeño.• Consulteconelfabricantedelsujetadorparavereltamañodelabroca
parataladrar. • NO TALADRE PREVIAMENTE la subestructura de madera�Aplicación de tablones • La instalación de los tablones de la Serie I es similar a la de otros
tablonescompuestosodeplataforma. • Los tablones de la Serie I NO ESTÁNdiseñadosparausarsecomo
elementos estructurales� • Lasalientesuperficialdelaplataformadebelimitarseaunmáximode
1-1/4ʺ[32mm]ydebetomarseenconsideracióndelgrosordelaplacao ribete�
• Lassuperficiesreflejantes(porejemplo,costadosmetálicosodevidriopocoreflejante)puedentenerunimpactoultravioletainusualyhacerqueseacumuleelcalorenlaplataforma,loquepuedeprovocarresultadosinesperadosenelmaterialdelaSerieI.Diseñesuplataformatomandoencuentaesto,siemprequeseaposible.
• Dejeunlibramientoenelsueloparatenerventilaciónadecuada.Laventilaciónpuedetenerelbeneficioadicionaldeayudarconlaexpansiónycontracción.ComosemuestraenlaFig.1.
58 DECKING INSTALLATION : I-SERIES
Puntos de sujeción con un tablón sencillo de borde ranurado PuedeusarelperfildetablonesinicialesdelaSerieIparaenmarcarla
plataforma.Estáranuradosoloenunladoytieneunbordeterminadoenescuadraporelotrolado.
• Estetablónperimetraldebefijarsedesdearribacontornilloscompuestosparaplataformadecolorqueconcuerde.
• Los tornillos deben situarse a 1-1/4ʺ[32mm]delbordedelperfildeSerie I�
• UsesujetadoresocultosHULKentrelosperfilesdelaplataforma. Comosemuestraenlasfiguras2,3y4. Nota: NO APRIETEexcesivamenteeltornilloenlasuperficiedelaplataforma. LaplataformadeSerieInoessólidaytienecavidadesquequedarían
comprometidassilapotenciadeltaladroesdemasiadoalta.
Fig. 2
Tablón ranurado Tablón inicialTornillosuperiordefijación
Sujetador oculto HULK
Tablón ranurado
Tablón inicial
VISTA SUPERIOR
VISTA LATERAL
Fig. 3 VISTA LATERAL
VISTA SUPERIOR
TornillosuperiordefijaciónTablón cuadrado
Tablón cuadrado
Tablón ranurado
Tablón ranurado
DECKING INSTALLATION : I-SERIES 59
INSTALACIÓN: LINEAMIENTOS PARA ASERRAR LOS TABLONES
Lineamientos principales de arreglo para tablones aserrados • Lostablonespuedensujetarsecontornillosdefijaciónsuperioren
ciertascircunstancias,particularmentesisehanaserrado. • Unasolalínealongitudinaldesujetadorespodríagiraryconstituirun
peligro. • Todoslostablonesrequierendossujetadoresencadavigueta,ya sean
dos brochesHULK,unbrocheHULKyuntornillocompuestoodostornilloscompuestosparaestarsujetoadecuadamentealmarco.
ComosemuestraenlaFig.1. • Todoslostornillossuperioresdefijacióndebenestarcolocadosa1-1/4ʺ
[32 mm] del borde del tablón�
Fig. 1
Final ProductRip Cut
Incorrect CorrectCORTE TRANSVERSAL
Fig. 4
CORRECTOINCORRECTO
VISTA DE SECCIÓN
Colocación ideal de los tornillos
Espacio7/8ʺ[23mm]-1-3/16ʺ[30mm]Espacio2ʺ[51mm]-2-5/16ʺ[58.5mm]Espacio3ʺ[76mm]-4-1/8ʺ[105mm]
Loscortesserradosolongitudinalesdebenevitarlaredo“patas”deltablón.Lafigura2ilustravariasmanerasenquepuedenaserrarselostablonesysujetarsefirmementeparapreservarlaintegridaddelaplataforma.
60 DECKING INSTALLATION : I-SERIES
Nota: • Elanchomínimodeltablóndespuésdeseraserradoesde2-1/2ʺ
[63 mm]� • Serecomiendaaserrarlostablonesvolteadosenlasierraverticalpara
verexactamentelacolocacióndelasierraenrelaciónconlaspatasdeltablón�
Fig. 2
CORTESERRADO
PRODUCTOFINAL
CORTE TRANSVERSAL
• Siemprequeseaposible,cuandohayaaserradountablóndeSerieI,colóquelo con el lado aserrado hacia adentro, hacia los demás tablones delaplataforma,paraqueelbordenoaserradoactúedeextremodelaplataforma.
• Nuncaclaveoatornilleatravésdelaredo“patas”delperfildeSerieIafindeevitarqueserajeeltablón.
ComosemuestraenlaFig.3.
Fig. 3
CORRECTOINCORRECTO
CORTE TRANSVERSAL
Cortes • Los tablones de la Serie I no deben cortarse a menos de 2-1/2ʺ[63mm]deancho. • Siesnecesario,primerosierreelprimertablóndeSerieIyelúltimo
paraqueajustenenelespaciodelainstalación. • Usemínimodossujetadoresporvigueta,enpuntosequidistantesya
porlomenos1-1/4ʺ[32mm] de cualquier borde del tablón�
DECKING INSTALLATION : I-SERIES 61
Fig. 4
Viguetadoble=Topes Bloques=Tablonesconabrazaderas
Fig. 6
Espaciadode16ʺ[407mm]delcentroentablonesdeplataformaa90o
Espaciadode12ʺ[305mm]delcentroentablonesdeplataforma
90o
16ʺ[407mm]
45o
12ʺ[305 mm]
Espaciamientodeviguetasentablonesranurados y cuadrados en ángulo
90o 60o 45o 30o
16ʺ[407 mm]
12ʺ[305 mm]
14ʺ[356 mm]
8ʺ[203 mm]
VISTA SUPERIOR
Fig. 5 VISTA SUPERIOR
Vigueta
Sujetador oculto Sujetadorsuperior
Tablones intermedios
Primer tablón
Últimotablón
Mínimoa1-1/4ʺ[31.75mm]decualquier borde
Nota: Podría requerirse pretaladraralfijardesdearriba Saliente máxima
de1-1/4ʺ[32mm]
• Pueden hacerse cortes de inglete en los tablones� Use dos sujetadores equidistantesyaporlomenos1-1/4ʺ[32mm] del borde en cada tablón en inglete� NO USE el router en los tablones�
Soportes y tramos • Laseleccióndelmaterialestructuralafectalavidadelaplataforma.
Asegúrese de que se sigan los reglamentos locales de construcción� • Nodebepermitirsequelostablonessobresalganmásde1-1/4ʺ
[32 mm].Esnecesariocontarconsoporteadicional,como se muestra enlasfiguras4,5y6.
62 DECKING INSTALLATION : I-SERIES
CUIDADO Y MANTENIMIENTO
LIMPIEZA DE LOS TABLONES DE LA PLATAFORMAQuévaanecesitar
Jabón Agua Cubeta Esponja Mangueradealtapresiónconboquilla de pulverización
Escobade cerdas duras
PASO 1:Apliqueaguajabonosaenlaplataformaconunaesponja.PASO 2:Barraellíquidosobrelaplataformaconlaescobadecerdasduras,
asegurándosedeeliminartodalasuciedadylosresiduosdelosespaciosentrelostablonesdelaplataforma.Esmejorbarrerenelsentidodelgrano�
PASO 3:Sisiguehabiendoresiduososuciedadenlaplataforma,unamangueradealtapresiónesmuyefectivaparaeliminarlosresiduosorgánicostercoseinevitables.
NOTA:Useunamangueradepresiónconunapuntapulverizadoraanchaaunapresióndemenosde1500psi.Recuerdemantenerlamangueraaporlomenos12ʺ[300mm]dedistanciadelasuperficiealrociarla.
Paraobtenermejoresresultados,lavelaplataformaconmangueradealtapresiónalmismotiempoquelabarreconlaescobadecerdasdurasyaguajabonosa.Recomendamoslavarlaplataformaapresiónunavezalmesparamantenersuaspectolimpioycuidado.
Extremelasprecaucionesallavarapresión,yaquepodríadañarsuplataformade Serie Isilohaceincorrectamente.Sinotacualquiercambioenlasuperficiedelperfil,suspendaellavadodeinmediatoycomuníqueseconFortress.
*NO USE limpiadoresestándardeperfilescompuestosenlaSerieI.
DECKING INSTALLATION : I-SERIES 63
Cuidado general • LaveelperfildeSerie Iperiódicamenteconlimpiadorescaserosestándar. • Debeevitardetergentesfuertes,oxidantesyácidosminerales
concentrados,asícomohidrocarburoshalogenados,ésteres,éteresycetonas�
• El agua, las soluciones salinas acuosas, las soluciones de detergente, los ácidosyálcalisdiluidossonaceptables.
• Paracomprobarqueellimpiadornovaadañarlacubierta,pruébeloenunáreapequeñaoenunapiezadescartadadeperfildeSerie I antes de usarlo�
• NouselimpiadoresestándardeperfilescompuestosenlaSerie I� • Limpielosderramestanprontocomopuedaparaevitarquesehagan
manchas� • Ciertosquímicospresenteseninsecticidas,losbloqueadoressolares,
losaceitesdeciertasplantasyelclorosindiluirsonmaterialescomunesquepuedenentrarencontactoconelperfilynosoncompatiblesconlacubiertaHDPE.Evitequeesassustanciasinteractúenconlostablonesde Serie I�
• Hayalgunosartículos,comolostapetesdecauchoylasmanguerasdejardín,quepuedenemitirésteresque,coneltiempopuedenafectarlasuperficiedelostablonesdelaSerie I.Debetenersecuidadoparaevitarelcontactoprolongado.
• Muevaoretireperiódicamentelosmuebles,lostapetesdeentrada,lasmacetasyotrosaccesoriosparaevitardiferenciaseneldesgaste.
• LospegamentosPVC,elcemento,lapintura,etcétera,puedendañarydecolorarlasuperficiedelperfil.
• Puedeusaruncepillodecerdasparaeliminarmanchasdeóxidoysimilares.• Encasodemanchasparticularmenteresistentes,puedelijarsuavementela
superficie.Naturalmente,estoeliminamaterialdelacubiertaprotectoraydebeevitarseyaqueafectaalasuperficiedeltablón.
64 DECKING INSTALLATION : I-SERIES
• Losdepósitosmineralesqueocurrennaturalmentecomoresultadodelaevaporacióndesolucionescongrancontenidodesalpuedendejarresiduosblancosenlasuperficiedelaplataforma.Lascausasprincipalesdeestefenómenoeslacalidaddelaguayelambientecircundante.Siemprequeseaposible,debeevitarqueseencharqueenlosperfilesdelaplataformaaguacongranvolumendeminerales.Esosresiduospuedenlimpiarseconlosmétodosrecomendadosanteriormente.Sinecesitamásayuda,comuníqueseconnosotroseninfo@fortressbp.com�
Hielo y nieve • En los tablones de Serie Ipuedenusarsesustanciasquecomúnmentese
usanparalimpiarhieloynievedesuperficiesyquecontienenclorurodecalciooclorurodesodio.Comoyaseexplicó,estaspuedendejarresiduosblancosenlaplataforma.Esosresiduos,sinembargo,puedenlimpiarseconlosmétodosrecomendadosanteriormente.
• NousepalasdemetalniotrosobjetosfilososenlasuperficiedeSerie I� Use unapaladeplásticoyherramientasredondeadasobiseladasparaquitarelhielo o materias similares�
• Observequelacaracterísticaantideslizantesereduceconelhielo,lanieveymaterias similares y debe de tenerse cuidado en esas ocasiones�
Carga estática • Losmaterialescongranpolaridadqueseencuentranenambientessecos
ydepocahumedadtienenunacargamásfuertealsepararselosdosmateriales�
• Puedereducirselaacumulacióndecargaestáticaaterrizandolaestructuradelperfiloincrementandolahumedaddelambiente.Puedenevitarselasdescargasdeestáticaenáreasdeterminadas(porejemplo,enlospuntosdeacceso)colocandotapetesatierraparacontrolarlaestática.
DECKING INSTALLATION : I-SERIES 65
GARANTÍA
EstagarantíalimitadadelasplataformasSerieIdeFortressBuildingProducts(la“GarantíaLimitada”)seextiendealcompradororiginal(el“Comprador”o“Usted”)delaplataformaFortressInfinity(el“Producto”)deFortressDeckProducts,LLC(“FortressDeck”).Paraefectosdeestagarantíalimitada,una“aplicaciónresidencial”significalaaplicacióndeunproductoenunaresidenciaunifamiliar.Una“aplicacióncomercial”significalainstalacióndelproductoencualquierotroladoqueno sea una residencia unifamiliar�
1. Desempeño del producto:EnFortressBuildingProductsapoyamoscadaunodelosproductosquevendemos.Sinembargo,esnormalquelosproductosdeplataformaenvejezcanconeltiempo.Elenvejecimientoesunfenómenonormalenunproductoqueestáexpuestoalsol,lalluviayloselementosdelanaturaleza.Puedeserdifícilpreverladuracióndelproductoyaquenohaydosinstalacionesqueexperimentoslosfactoresdeenvejecimientodelamismamanera.Losproductosvanaenvejeceradiferenteritmodebidoalclima,elíndiceultravioleta,lacalidaddelainstalación,elusoymuchosotrosfactoresquecausanenvejecimiento.FortressBuildingProductsleextiendeaustedestagarantíalimitada,sujetaalostérminosycondicionesestablecidosenlamisma,paradarletranquilidadencasodequeundefectodemanufacturacausaraunafalladelproducto,comoseestableceacontinuación.Siporcualquierrazónelproductomostraraseñalesdefalla,dañoodeterioro,reempláceloorepárelodeinmediatoparaevitarpeligrospotenciales.
2. Cobertura de la garantía: 25 años de garantía estándar limitada en aplicaciones
residenciales 10 años de garantía estándar limitada en aplicaciones
comercialesFortressBuildingProductslegarantizaalcomprador,porunperiododeveinticinco(25)añosapartirdelafechadecompraoriginalenaplicacionesresidencialesydediez(10)añosapartirdelafechadecompraoriginalenaplicacionescomerciales
66 DECKING INSTALLATION : I-SERIES
queelproducto,encondicionesdeusonormalesydeservicioadecuado,notendrádefectosdemanufacturaynosevaafisurar,astillaropudrir,nivaasufrirdañosestructuralesportermitasodeterioromicótico.
Garantía limitada de decoloración y manchas en aplicaciones
residenciales: FortressBuildingProductslegarantizaalcompradorlaresistenciaadecoloraciónymanchasdelproducto,encondicionesdeusonormalesydeservicioadecuado,porunperiododeveinticinco(25)añosapartirdelafechadecompraoriginalenaplicacionesresidencialescomosigue: (A) Resistencia a la decoloración: Elcolordelproductonosevaadesvanecerporlaluzylaexposiciónaloselementosdelanaturalezaenmásde5unidadesDeltaE(CIE).Esimportanteseñalarquesibienelproductoestádiseñadopararesistirladecoloración,FortressBuildingProductsnogarantizaqueelproductoseaapruebadelamisma,yaqueningúnmaterialesapruebadedecoloracióncuandoseexponealosrayosultravioletayaotroselementosdelanaturaleza. (B) Resistencia a las manchas:Elproductoseráresistenteamanchaspermanentescausadasporalimentosybebidasquegeneralmenteseencuentranenunaplataformaresidencial(p.ej.,mostaza,cátsup,mayonesa,salsadebarbacoa,refrescosycafé)yquesepudieranderramarenlasuperficiedelproducto,opormohouhongospresentesenformanaturalenelambiente,habidacuentadeque:
1. Enunplazodeuna(1)semanaapartirdelaexposicióndelasuperficiedelproductoaalimentosobebidaso,encasodemohoyhongos,enunplazodeuna(1)semanaapartirdelaprimeraaparicióndelmohoyhongo,elcompradorhayatratadodelimpiareláreaafectadasiguiendolosprocedimientosdelimpiezaestablecidosenlaGuíadelimpiezaycuidadodeplataformasFortress(disponibleenwww.fortress.com/resources).
2. SilamanchasiguesiendoextremadamentevisibledespuésdehaberllevadoacaboelprocedimientodelimpiezaestablecidoenlaGuíadelimpiezaycuidadodeplataformasFortress,elcompradordebehacerqueunlimpiadorprofesionaldeplataformaslimpieelárea
DECKING INSTALLATION : I-SERIES 67
afectadaporcuentadelpropiocompradorenunplazodeuna(1)semanaapartirdelaexposicióndelasuperficiedelproductoalalimentoobebidao,encasodemohoyhongo,enunplazodeuna(1)semanaapartirdelaprimeraaparicióndelmohoyhongo.
3. Sidespuésdehaberllevadoacabolosdos(2)pasosinmediatamenteprecedenteslamanchasiguesiendoirrazonablementevisible,elcompradordeberánotificarleaFortressDeckenunplazodetreinta(30)díasapartirdehaberllevadoacabolalimpiezaprofesional.
FortressBuildingProductsnogarantizaqueelproductoseaapruebademanchasynoextiendegarantíasquecubranalimentosybebidasderramadosoaplicadosdeotromodo,nipormohosyhongos,quenoselimpienrápidayadecuadamentecomoseindicaanteriormenteydeconformidadconlaGuíadelimpiezaycuidadoFortressBuildingProducts(disponibleenwww.fortressdeck�com/cleaningandcare)� Además, dado que el moho yloshongospuedenasentarseycrecerencualquiersuperficiealairelibre,comoesteproducto,usteddebelimpiaryeliminardelproductosuciedadypolenquepudieranalimentarmohoyhongos�
Todaslasgarantíasycoberturasextendidasconformeaestagarantíalimitada están sujetas a todas las exclusiones, limitaciones y restricciones establecidasenlapresente.
3. Transferibilidad: Estagarantíalimitadapuedetransferirseuna(1)vezdentro
delperiododecinco(5)añosapartirdelafechadecompraoriginalporpartedelcomprador,alcompradorsubsecuentedelapropiedadenlaquesehubierainstaladooriginalmenteelproducto.
4. Exclusiones de la cobertura de la garantía: FortressBuildingProductsnogarantiza,nosehaceresponsabley
noconsideraráqueningunagarantía,explícitaoimplícita,cubreningunafalla,descompostura,dañoocondicióndelproductoatribuiblesa:
68 DECKING INSTALLATION : I-SERIES
1� Instalacióninadecuadadelproductoonohaberseguidoloslineamientosdeinstalacióndelproducto.
2� Usodelproductomásalládelascondicionesnormalesdeusoyservicio,oenunaaplicaciónnorecomendadaporloslineamientosolainstalacióndelproducto.
3� Movimiento,distorsión,colapsooasentamientodelterrenoodelaestructuradeapoyoenlosqueestuvierainstaladoelproducto.
4� Cualquiereventonatural,asícomocatástrofesnaturales(comoinundaciones,huracanes,terremotos,viento,granizo,tornados,rayos,etcétera).
5� Cualquiercondiciónambientalcomo,atítulodeejemplosin que sean todas, contaminación del aire, moho y hongos(exceptocomoseestableceexpresamenteenotrapartedeestagarantíalimitadarespectodelaresistencia a las manchas)�
6� Cualquiermanchaodecoloraciónporsustanciasajenascomo,atítulodeejemplosinqueseantodas,alimentos,bebidas,suciedad,grasa,aceite,pintura,materialesderevestimiento,sustanciasquímicasylimpiadoresdeusonoaprobadoenlaGuíadelimpiezaycuidadodelasplataformasFortress(exceptocomoseestableceexpresamenteenotrapartedeestagarantíalimitadarespectodelaresistenciaalasmanchas).
7� CualquiermanchaodañoalproductocausadoporcompuestosabrasivosdepHácidoobásico,pinturasomanchas,solventes,óxidometálicouotrosartículosdeusoanormalenlaplataforma,asícomosustanciasquenofueranalimentosnibebidascomo,atítulodeejemplosinqueseantodas,biocidas,fungicidas,alimentodeplantasobactericidas,aceitedemotorylocionesparaasolearseoprotegersedelsol.
8� Eldesgastenormal(definidocomoeflorescencia,exposiciónalaluzsolar,elclimaylascondicionesatmosféricasquehacenquecualquiersuperficieconcolorpocoapocosedecolore,sehagacaliza,acumulepolvoomanchas)yvariacionesocambiosdecolorenelproducto.
DECKING INSTALLATION : I-SERIES 69
9� Cualquierdecoloramientoomanchaquenoestéenlasuperficiedelproducto(esdecir,enlapartedeabajoolosextremosdelproducto).
10� Manejo,mantenimiento,cuidados,almacenamientoinadecuadosomaltrato,descuidoomalusodelproductoporpartedelcomprador,delapersonaalaqueseletransfirióoterceraspartes.
11� Exposiciónafuentesdecalorexcesivo(directaoindirectamente)como,atítulodeejemplosinqueseantodas,fuego,luzsolarreflejadaenvidriodeemisionesbajasodecualquierotroreflejosolarreforzadooconcentrado�
12� Fabricaciónoremanufacturaporpartedelcomprador,lapersonaalaqueselehubieratransferidooterceraspartes.
13� Usoydesgastecomún,rayadurasoarañazos. 14� Impactodeobjetos.
Además,estagarantíalimitadaseránulasi(1)seleaplicanalproductopintura,tintessuotrosmaterialesderevestimiento;o(2)lasuperficiedelproductosehadañadoopinchadoaconsecuenciadehaberusadounapalademetaluotraherramientadebordeafilado.Nodebenusarsetalesherramientasparaquitarnieve,hieloniotrosdesechosdelasuperficiedelproducto.
ESTAGARANTÍALIMITADANOCUBREYFORTRESSDECKNOSEHARÁRESPONSABLEPORCOSTOSYGASTOSENQUESEINCURRAENRELACIÓNALRETIRODEPRODUCTOSOCOMPONENTESDEFECTUOSOS,NIPORLAINSTALACIÓNDEPRODUCTOOCOMPONENTESDEREEMPLAZOCOMO,ATÍTULODEEJEMPLOSINQUESEANTODOS,MANODEOBRA,COSTOSDEFLETEEIMPUESTOS.
70 DECKING INSTALLATION : I-SERIES
5. Procedimiento de reclamación de garantía: Parapresentarunareclamacióndentrodeestagarantíalimitada,
elcompradorolapersonaalaquesehayatransferidodebeenviarunadescripciónyfotografíasdelsupuestodefectoocondicióncubierta,elcomprobantedecompray,silareclamaciónserefierealagarantíalimitadaderesistenciaalasmanchas,pruebadehabercumplidoconlosrequisitosestablecidosenlasección 2(b)“Resistenciaalasmanchas”,alasiguientedirección:
FortressBuildingProducts,LLC 1720 N� 1st St� Garland,Texas75040 1-866-323-4766 Correoelectrónico:warranty@fortressdeck.com
TodaslasreclamacionesrelacionadasconlagarantíalimitadaderesistenciaalasmanchasdebenrecibirseenFortressBuildingProductsamástardar30díasdespuésdehaberserealizadolalimpiezaprofesional,comoseestableceenlosrequisitosestablecidosenlasección2(b)“Resistenciaalasmanchas”.Todaslas demás reclamaciones deben recibirse en Fortress BuildingProductsamástardar30díasdespuésdehaberdescubiertoelposibledefectoocondiciónosatisfactoria,peroenningúncasodespuésdelacaducidaddelperiododegarantía.
Traslaconfirmacióndeunareclamaciónválidaconformealoaquíestipulado,FortressBuildingProducts, conforme a su criterioexclusivo:(1)proporcionaráunareparaciónautorizadadelproductodefectuoso;(2)reemplazaráelproductodefectuoso;o(3)reembolsarápartedelpreciodecomprapagadoporelcompradorpordichoproductodefectuoso(sinincluirelcostodeinstalacióninicial).Elmaterialdereemplazoserálomáscercanoposibleencolor,diseñoycalidadaldelmaterialoriginaldentrodelorazonablementeposible,ajuicioydeterminacióndeFortress BuildingProducts,pero FortressBuildingProductsnogarantizala coincidenciaexactayaqueloscoloresyeldiseñopuedencambiar�Sisehaceunareclamaciónválidaconformealoaquíestipulado,larecuperaciónseráprorrateadadeconformidadconeltabuladorprorrateadodegarantíalimitadaparaaplicacionesresidenciales(encasodereclamacionesdeaplicacionesresidenciales)oeltabuladorprorrateadodegarantíalimitadaparaaplicacionescomerciales(encasodereclamacionesdeaplicacionescomerciales),loscualesseestablecenacontinuación.
DECKING INSTALLATION : I-SERIES 71
Si Fortress BuildingProductsvaaproporcionarmaterialesdereemplazo,Fortress BuildingProducts puededecidirreemplazarelporcentajecorrespondientequeseindicaacontinuacióndelproductoqueporlodemáscumplaconlosrequisitos de reclamación; y si Fortress BuildingProductsvaareembolsarelpreciodecompra,FortressDeckdecidirreembolsarelporcentajecorrespondientequeseindicaacontinuacióndelpreciodecompraoriginaldelproductoque,porlodemás,cumpleconlosrequisitos de reclamación�
0-56789
1011121314
100%97%92%
87%82%77%72%67%62%57%
Años desde la fecha de compra original
Recuperación
Tabulador prorrateado de la garantía limitada en aplicaciones
residenciales
151617181920
21-25
52%47%42%37%32%27%25%
0-56789
10
100%80%60%
40%20%10%
Años desde la fecha de compra original
Recuperación
Tabulador prorrateado de la garantía limitada en aplicaciones
comerciales
72 DECKING INSTALLATION : I-SERIES
6. Ninguna otra garantía:ESTAGARANTÍALIMITADACOMPRENDELOSPRODUCTOSFortress BUILDINGYESTODALAGARANTÍA.FORTRESSDECKNODANINGUNAOTRAGARANTÍA(ORALOESCRITA)YNOAUTORIZAANINGUNAENTIDAD,PERSONAOAGENTEADARNINGUNAOTRAGARANTÍAENSUNOMBRE,NIAMODIFICAR,AMPLIAROAGREGARLENADAAESTAGARANTÍALIMITADA.TODASLASDEMÁSGARANTÍAS,YASEAEXPLÍCITASOIMPLÍCITASCOMO,ATÍTULODEEJEMPLOSINQUESEANTODAS,GARANTÍASIMPLÍCITASDEMERCANTIBILIDADOADECUACIÓNPARAUNPROPÓSITODETERMINADOSEDESCONOCENEXPRESAMENTE.
TODASLASGARANTÍASIMPLÍCITAS,COMOGARANTÍASIMPLÍCITASDEMERCANTIBILIDADOADECUACIÓNPARAUNPROPÓSITODETERMINADO,QUENOSEDESCONOZCANEFECTIVAMENTEOQUELASLEYESCORRESPONDIENTESNOPROHÍBANDESCONOCER,ESTARÁNLIMITADASALRÉGIMENDEPRESCRIPCIÓNYENNINGÚNCASOSEAMPLIARÁNMÁSALLÁDELPERIODOCORRESPONDIENTEDEGARANTÍA.ENNINGUNACIRCUNSTANCIA,FORTRESSDECKSERÁRESPONSABLEDEDAÑOSCONSECUENTES,ESPECIALESOINCIDENTALESSURGIDOSORELACIONADOSCONLACOMPRAOELUSODELPRODUCTONIPORNINGUNAVIOLACIÓNDELAGARANTÍA.LARESPONSABILIDADDEFORTRESSDECKCONRESPECTODEDEFECTOSENPRODUCTOSENNINGÚNCASOEXCEDERÁALREEMPLAZODEDICHOPRODUCTOOALREEMBOLSODELPRECIODECOMPRA,COMOSEESTABLECEANTERIORMENTE.
Algunosestados(oprovincias)nopermitenlimitacionesenrelaciónconladuracióndeunagarantíaimplícita,nilaexclusiónolimitacióndedañosincidentalesoconsecuentes,porlotanto,lasanterioreslimitacionesoexclusionespuedennoaplicarseensucaso.Estagarantíaleotorgaderechoslegalesespecíficos,yustedpuedetenerotrosderechosquevaríandeunestadoaotro(odeunaprovinciaaotra).
DECKING INSTALLATION : I-SERIES 73
7. Jurisdicción: Estagarantíalimitadaseregiráeinterpretarádeconformidadconlas
leyesdelestadodeTexas,independientementedesuconflictodeleyes.CualquieracciónlegalquesurgieredeestagarantíalimitadaselitigaráyseharácumplirbajolasleyesdelestadodeTexas.Además,laspartesdeesteacuerdodegarantíalimitadaaceptansometersealajurisdiccióndelostribunalesdelestadodeTexas,yquecualquieracciónlegalllevadaacaboconformealoaquíestipuladoseharádentrodelajurisdicciónexclusivadelostribunalesenelestadodeTexas,EE.UU.
74 DECKING INSTALLATION : I-SERIES
JOIN THE REVOLUTION.REJOIGNEZ LA RÉVOLUTION.
ÚNASE A LA REVOLUCIÓN.
FortressBP.com | 866.323.4766
Unless otherwise noted, all proprietary names are trademarks of Fortress Iron, LP. All rights reserved.
08/2020
© 2020 Fortress Building Products.
À moins d’indication contraire, tous les noms de spécialités sont des marques déposées de Fortress Iron, LP. Tous droits réservés.
Todos los nombres propios de productos son marcas comerciales de Fortress Iron, LP, a menos que se indique lo contrario. Todos los derechos reservados.
Recommended