View
245
Download
0
Category
Preview:
Citation preview
CLASSIS INSTALLED SOUND MICROPHONES
GOOD SOUND RIGHT FROM THE START –
The purpose of a microphone is to convert the sound of the spoken word into an electrical signal. Sound and volume have to be synchronised perfectly, because a bad signal at the beginning of a sound system chain cannot be converted into a good signal anymore.
The beyerdynamic installed sound ensure the uncompromising transmission of the spoken word and maximum intelligibility of speech. The versatile product range provides solutions for different applications such as lecterns, panel discussions, meetings, conferences, tele/video conferences and ceiling installations.
The Scudio Technology makes microphones immune to interferences from mobile phones
The Scudio technology includes many electronical and mechanical measurements to eliminate unwanted interferences from mobile phones. The patented shielding of the capsule is an important detailof all microphones. The interaction of all Scudio features ensures the optimal sound quality and intelligibility of speech of the beyerdynamic installed sound microphones.
GM 305GM 306
GM 315
GM 303
The gooseneck microphones of the Classis GM 3xx-series with an extremely small microphone head meet the requirements of design. The thin gooseneck of 6 mm with a mat black, non-glare surface can be discretely integrated into any installation. The cardioid polar pattern of the microphones ensures maximum volume due to a high gain before feedback with excellent intelligibility of speech. The versatile series allows many kinds of application: the use with speaker’s desks or altars, the use in conference systems, in studio and sound systems for mixing consoles and the use as stationary microphone in paging systems.
GOOSENECK MICROPHONES –
CLASSIS GOOSENECK MICROPHONES
Gooseneck microphones with 3-pin XLR connector
Classis GM 303Length 300 mm (12“), completely flexible gooseneck.
Classis GM 305Length 500 mm (20“), flexible gooseneck at the top and bottom, rigid tube in the middle.
Classis GM 306Length 600 mm (24“), flexible gooseneck at the top and bottom, rigid tube in the middle.
Gooseneck microphones with externally controlled LED ring and 5-pin male XLR connector
Classis GM 315Length 500 mm (20“), flexible gooseneck at the top and bottom, rigid tube in the middle.
The LED ring is externally controlled via the 5-pin male XLR connector. It signalises, for example, if the microphone is turned on.
For beyerdynamic conference systems, the microphones are also offered without preamplifier.LED ring
Gooseneck microphones with LED ring, programmable button and 3-pin XLR male connector
Classis GM 313 SPLength 300 mm (12“), completely flexible gooseneck.
Classis GM 315 SPLength 500 mm (20“), flexible gooseneck at the topand bottom, rigid tube in the middle.
By using the programmable button of the SP variants you can select the operating mode ON/OFF, Push-To-Talk or Push-To-Mute. The microphone button can also be completely disabled. Furthermore, there are two settings of the frequency response possible: linear or with bass roll-off to suppress low-frequency noise. The LED ring to display the microphone status can be deactivated.
Gooseneck microphone with LED ring, programmable button, remote control and 5-pin XLR male connector
Classis GM 315 RCLength 500 mm (20“), flexible gooseneck at the topand bottom, rigid tube in the middle.
CLASSIS GOOSENECK MICROPHONES
GM 315 SP / RC GM 313 SP LED ring
In addition to the features of the SP variants, the RC version allows the operation by an external control. In addition to this an external device can be controlled via the control output when operating the microphone button.
Shock-mounted installation holder
The shock-mounted installation holder for the Classis GM and RM microphones is available as 3-pin (GMS 32) and 5-pin variant (GMS 52) in black (B) or white (W). The removable lid covers the holder when the microphone is not in use. On request it can be produced in individual colours to match the surface of the table visually.
Programmable buttons of the SP and RC variants
Microphone base for different applications
The handy microphone base is avail-able in two versions for gooseneck microphones with (5-pin version) or without (3-pin version) an LED ring. The on-off button is backlit to display the status. Standard applications include the use with lecterns, podiums or announcements. In conjunction with a DSP device (Digital Signal Processor) seve-ral GMB 35 S 5-pin versions can be used as conference system.
Stand mounting Cover cap with 5/8“ internal thread incl. 3/8“ adapter for stand mounting(supplied accessory).
Base plateZSH 305 base plate for permanent installation on tables, speaker’s desks etc.(supplied accessory).
Low frequency isolation ZSA 305 mounting adapter for ZSH 20 holder with low frequency isolation, cable outlet at the bottom(optional accessory).
Detailed mounting accessories
Wireless gooseneck microphone
You can use the GM 305 T gooseneck microphone in wireless applications when flexibility is required – for example for speaker’s desks. The connecting cable can be connected to the beltpack transmitters of the Opus and Synexis wireless series. The microphone is then powered by the beltpack transmitter.
CLASSIS GOOSENECK MICROPHONES
T-Version with smart accessoriesfor different applications The T-version features extensive mounting accessories. Depending on the application the microphone can be mounted on a stand, tabletop or speaker’s desk.
Classis GM 305 T Length 500 mm (20“), flexible gooseneck on top and bottom, rigid tube inthe middle, external M18 x 0.75 thread, connecting cable 2.5 m with 4-pinfemale mini XLR socket, incl. CVE 305.18 power supply, cover cap andZSH 305 base plate.
Wireless solution
For lecture hall applications there is an easy to handle solution when the GM 301.18 microphone is used with a beltpack transmitter of the Opus or Synexis wireless series.
When stored in the charger the set will always be ready for use and when needed, it can be placed in the breast pocket of the speaker.
CLASSIS GOOSENECK MICROPHONES
Miniature microphone
Classis GM 301Miniature gooseneck microphone GM 301.18, length 100 mm (4“), 4-pin female mini XLR connector, CVE 301.18 preamp and blind cover.
The microphone can be connected via the 4-pin female mini XLR connector to the CVE 301.18 power supply, which also serves as mounting holder with low frequency isolation. When the microphone is not connected, the connection can be protected by using the cover cap. The microphone is used for example in video conferences.
Gooseneck microphones entry series
The gooseneck microphones of the Classis GM 1xx series feature a cardioid polar pattern with a high gain before feedback. The microphones with a matt black, non-glare surface and 6 mm thin gooseneck discretely blend into each environment. They can be used for example on lecterns.
Classis GM 105Length 500 mm, top and bottom gooseneck, rigid tube in the middle, 3-pin XLR male connector.
Classis GM 115Length 500 mm, top and bottom gooseneck, rigid tube in the middle, LED ring, 5-pin XLR male connector.
GM 105 GM 115 LED ring GM 115
Blind cover
BOUNDARY MICROPHONES –
CLASSIS BOUNDARY MICROPHONES
BM 52 / 52 RC
Classis BM 42 / 43 Boundary Microphones
The Classis BM 42 / 43 series consists of small, discreet condenser boundary microphones. The balanced frequency response and the discreet design provide a variety of applications: The microphones can be used for discussions, tele-/video conferences or live and theatre applications.
Classis BM 42 B / W / BCThe half-cardioid polar pattern increases the gain before feedback and reduces the diffuse room noise.Available in black (B) and white (W) with bare-ended connecting cable and in black with XLR male connector (BC).
Classis BM 43 B / W / BCHalf-spherical polar pattern: The high sensitivity results in a sufficient output level even when miking from a distance. Available in black (B) and white (W) with bare-ended connecting cable and in black with XLR male connector (BC).
Classis BM 52 Boundary Microphone
The Classis BM 52 boundary microphone combines a number of different functions in a small, discreet housing. Depending on the application there are three operating modes you can select: ON-OFF, Push-To-Talk and Push-To-Mute. Furthermore, the frequency response can be set in three stages: linear or a two-stage roll-off filter to compensate low-frequency noise. The Classis BM 52 is operated via a silent membrane key with Braille and a super bright LED displays the ready-to-speak status. It is ideal for discussions or tele/video conferencing.
The Classis BM 52 RC provides the additional feature of an external operator use or the microphone itself can send a control command. Both models are fitted with a mini XLR connection.
Classis BM 52Half-cardioid polar pattern, including cable with 3-pin male XLR connector.
Classis BM 52 RCHalf-cardiod polar pattern, including cable with 5-pin male XLR connector. Remote control possible.
BM 42 / 43 B / BC
BM 42 / 43 W
Conference and Recording
If meetings are to be recorded, the steno-s conference and recording software is ideal to complement the MPC 70 USB boundary microphone. With just one mouse click steno-s will easily record all discussions on a PC during your meeting.
More informationen www.steno-s.com
MPC 70 USB Boundary Microphone
The MPC 70 USB microphone is suitable for the connection to computers and laptops. Depending on the application you can choose between the operating modes ON-OFF, Push-To-Talk and Push-To-Mute. Furthermore, the frequency response can be set in two stages: linear or roll-off filter to compensate low-frequency noise. The switchable gain compen-sates loud or quiet speakers or small or big distances between microphone and speaker. It is ideal for the audio recording of conferences and meetings with a maximum of 10 participants or for web conferences and discussions.
Quinta TB Wireless Boundary Microphones
Due to its high degree of flexibility and reliability the wireless Quinta TB boundary microphone is suitablefor small meeting rooms, huddle rooms or video conferencing.
The proven triple band technology of the Quinta family ensures the wireless transmission. The privacy is guaranteed by a 128-bit encryption and a 24-bit PIN code. The multi-channel receiver features a long operating time of 14h at minimum and a short charging time. Different operating modes can be selected via the software. In the Microphone mode, Quinta CU acts as a multi-channel receiver in which a maximum of four Quinta TB can be operated simultaneously. In this mode several control units can be connected via the software. In the Conference mode, the Quinta TB acts as a delegate unit and can therefore be used for any conventional conferencing application.
CLASSIS BOUNDARY MICROPHONES
Quinta TBWireless boundary microphone, including power adapter for charging or operation. Pictured with optional charger.
MPC 70 USB Half-spherical polar pattern, connection cable with USB connector type B, 3 m long.
Quinta CUThe control unit provides flexible configuration and numerous interfaces.
Classis BM 34 B / W / SESemi-cardioid polar pattern, with bass roll-off, recommended for table installation. Integrated filter to reduce lowfrequent mechanical vibration(picture as BM 32).
BM 32 / 34 B BM 32 / 34 W BM 32 / 34 SE
BM 33 B BM 33 W BM 33 SE
BM 32 / 34 table installation with BMR
BMR LED ringThe BMR LED ring is an accessory for all Classis boundary microphones. It is used to indicate the status in tele or video conferences and illuminates in different colours. The BMR LED ring is controlled via a media control system, the logic output of a DSP mixer or a video conference system.
Installation Boundary Microphones
The discrete, almost invisible microphones for installations into tables or ceilings integrate into different materials and surfaces in the colours black (B), white (W) and silver (SE). Elastic rings achieve an efficient attenuation of unwanted mechanical vibration. They are connected via a 3-pin male XLR connector. The microphones are used in tele/video conferences, discussion rounds, for room monitoring or level measurement.
CLASSIS BOUNDARY MICROPHONES
Classis BM 32 B / W / SEBoundary microphone (semi-cardioid), recommended for table installation. The semi-cardioid polar pattern pointing forward and upwards increases the gain before feedback and reduces the amount of diffuse room sound.
For beyerdynamic conference systems the BM 32 E (black) is offered without preamp.
Classis BM 33 B / W / SESemi-spherical polar pattern, recommended for installations into ceilings or tables. The high sensitivity ensures a sufficient output level even when the distance is big.
Classis BM 33 boundary microphone
Classis RM 30 W Revoluto array microphone with GMS 32 W installation holder
MPR 210 W Revoluto array microphone
Classis OM 302Supercardioid polar pattern, for permanent installations into ceilings with standard installation sockets.
Classis OM 304Supercardioid polar pattern, for hanging installations into ceilings with standard installation sockets. The thin 8 m (26,2 ft) long twist-safe cable can be shortened and allows a discrete positioning of the microphone in any height.
OM 302OM 302 US
OM 304OM 304 US
Cab
le l
engt
h ca
n be
up
to 8
m (
26
.2 f
t)
The miniature microphones for permanent or hanging installations to ceilings allow almost invisible solutions. The short, flexible gooseneck allows an optimal positioning to the speaker and precise recording. The Classis OM microphones are used for ceiling installations in conference rooms, in tele/video conferences, in training rooms with distance learning or as ambiance microphones.
Another option to clear the table from technology and to pick up several people with a microphone are the beyerdynamic boundary microphones for installations and microphones with Revoluto technology. They are used, for example, for video conferencing.
When installing microphones to a ceiling, you should note in general that due to the large distance between microphone and speaker more ambient noise is picked up. Therefore, when installing the microphones, room acoustics and noise sources have to be taken into account.
CLASSIS OVERHEAD MICROPHONES
OVERHEAD MICROPHONES –
MPR 210 B
MPR 210 W
MPR 211 B
Recording area of a gooseneck microphone compared to a horizontal and vertical array microphone.
The horizontal and vertical arrangements of the microphone arrays differentiate in design as well as in the alignment of the corridor characteristic, which is displayed above.
Horizontal Array Microphone MPR 210 / 211
The desktop microphones with horizontal microphone array have a vertical corridor characteristic. They are used for panel discussions, conferences, meetings, tele/video conferences and for ceiling mounting.
MPR 210 B / WHorizontal array microphone, available in black (B) and white (W).
MPR 211 BHorizontal array microphone with LED strips to display the microphone status. Optionally the microphone button can be operated or disabled. Via the control output an external device can be controlled when operating the microphone button. At the bottom of the microphone the operating mode ON/OFF, Push-To-Talk or Push-To-Mute can be selected. Furthermore, it can be operated via an external switching contact (operator service).
MICROPHONES WITH REVOLUTO TECHNOLOGY –
The Revoluto principle is based on patented microphone array technology, where microphone capsules are arranged in either a horizontal or vertical row. Compared to gooseneck microphones this creates a much greater distance for voice pick up. As a result, the speaker is not restricted to the typical pick up pattern or usual compact speaking distance offered by most gooseneck microphones and therefore does not need to concentrate on talking directly into the microphone. The speaker has maximum freedom of movement with a consistent intelligibility of speech.
More information and video clips: www.beyerdynamic.com/revoluto
REVOLUTO ARRAY MICROPHONES
Maximum freedom of movement to the right and left without large volume fluctuations, limited the recording of signals and noises from the ceiling and table.
Whether close to the microphone or leaning backwards – sound deviations due to different distances are minimised.
No fading in and out when you move your head to the left or right.
Two or more people can share one microphone.
RM 30 B RM 30 W RM 31 SP / RC
Enhanced freedom of movement: Whether the speaker is sitting or standing, the volume and audio quality always remain the same.
Whether close to the microphone or leaning backwards – sound deviations due to different distances are minimised.
No fading in and out when you move your head to the left or right.
Optimal voice recording with a discreet mounting to the ceiling, ambient noise is minimised.
REVOLUTO ARRAY MICROPHONES
Classis RM 30 B / WDesktop microphone with Revoluto technology, available in black (B) and white (W).
Classis RM 31 SPVertical array microphone with an LED ring to display the microphone status. By using the programmable button it is possible to select between the operating modes ON/OFF, Push-To-Talk and Push-To-Mute. The microphone button can also be completely disabled. Furthermore, there are two settings of the frequency response possible: linear or with bass roll-off to suppress low-frequency noise. The LED ring to display the microphone status can be deactivated.
Classis RM 31 RCVertical array microphone with an LED ring to display the microphone status. In addition to the features of the SP variants, the RC version allows the operation by an external control. In addition to this an external device can be controlled via the control output when operating the microphone button.
Vertical Classis RM 30 / 31 Array Microphone
The desktop microphones with horizontal microphone array have a vertical corridor characteristic. They are used for panel discussions, conferences, meetings, tele/video conferences and for ceiling mounting.
* Please refer to the data sheet for details on phantom powering
Model Order # Polar pattern Connection Switch Illuminated ring Colour More
Classis GM 105 729744 cardiod 3-pin XLR black length 500 mm
Classis GM 115 729752 cardiod 5-pin XLR yes black length 500 mm
Classis GM 301 489336 supercardiod 4-pin female mini XLR black length 100 mm, incl. power supply
Classis GM 301.18 489328 supercardiod 4-pin female mini XLR black length 100 mm
Classis GM 303 722383 cardiod 3-pin XLR black length 300 mm
Classis GM 305 722405 cardiod 3-pin XLR black length 500 mm
Classis GM 305 T 722421 cardiod 5/8 or 3/8" internal thread black length 500 mm, incl. base plate
Classis GM 306 724246 cardiod 3-pin XLR black length 600 mm
Classis GM 313 SP 729787 cardiod 3-pin XLR yes yes black length 300 mm
Classis GM 315 722456 cardiod 5-pin XLR yes black length 500 mm
Classis GM 315 SP 729795 cardiod 3-pin XLR yes yes black length 500 mm
Classis GM 315 RC 729809 cardiod 5-pin XLR yes yes black remotely controllable
Classis BM 32 B 489395 semi-cardiod 3-pin XLR BMR optional black
Classis BM 32 W 489409 semi-cardiod 3-pin XLR BMR optional white
Classis BM 32 SE 489387 semi-cardiod 3-pin XLR BMR optional silver
Classis BM 33 B 489425 semi-spherical 3-pin XLR BMR optional black
Classis BM 33 W 489433 semi-spherical 3-pin XLR BMR optional white
Classis BM 33 SE 489417 semi-spherical 3-pin XLR BMR optional silver
Classis BM 34 B 489360 semi-cardiod 3-pin XLR BMR optional black bass roll-off
Classis BM 34 W 489379 semi-cardiod 3-pin XLR BMR optional white bass roll-off
Classis BM 34 SE 489352 semi-cardiod 3-pin XLR BMR optional silver bass roll-off
Classis BM 42 B 723789 semi-cardiod bare ends black
Classis BM 42 BC 729507 semi-cardiod 3-pin XLR black
Classis BM 42 W 723797 semi-cardiod bare ends white
Classis BM 43 B 723800 semi-spherical bare ends black
Classis BM 43 BC 729515 semi-spherical 3-pin XLR black
Classis BM 43 W 723819 semi-spherical bare ends white
Classis BM 52 729442 semi-cardiod mini XLR + cable 3-pin XLR yes black
Classis BM 52 RC 729450 semi-cardiod mini XLR + cable 5-pin XLR yes black remotely controllable
MPC 70 USB 475548 semi-spherical USB, Type B yes black
Quinta TB 729604 semi-cardiod wireless yes black Quinta CU control unit needed
Classis OM 302 489263 supercardiod installation socket white US version: Order # 489255
Classis OM 304 489298 supercardiod installation socket, 8 m cable white US version: Order # 489271
Classis RM 30 * 729388 corridor vertical 3-pin XLR black
Classis RM 30 W * 729701 corridor vertical 3-pin XLR white
Classis RM 31 SP * 729396 corridor vertical 3-pin XLR yes yes black
Classis RM 31 RC * 729825 corridor vertical 5-pin XLR yes yes black remotely controllable
MPR 210 B * 725145 corridor horizontal 3-pin XLR black
MPR 210 W * 725080 corridor horizontal 3-pin XLR white
MPR 211 B * 725099 corridor horizontal bare ends yes yes black controlled by a microcontroller
Goo
sene
ck m
icro
phon
esIn
stal
lati
on b
ound
ary
mic
roph
ones
OVERVIEW INSTALLED SOUND MICROPHONES –
Des
ktop
bou
ndar
y m
icro
phon
esR
evol
uto
arra
y m
icro
phon
esOv
erhe
ad
micr
opho
nes
Classis GM 105 729744 x x x XLR x x x
Classis GM 115 729752 x XLR x x x
Classis GM 301 489336 x
Classis GM 301.18 489328 x
Classis GM 303 722383 x x XLR
Classis GM 305 722405 x x XLR x
Classis GM 305 T 722421 x x 3/8“ x
Classis GM 306 724246 x x XLR x
Classis GM 313 SP 729787 x x x XLR x x x
Classis GM 315 722456 XLR x
Classis GM 315 SP 729795 x x x XLR x x x x
Classis GM 315 RC 729809 x x
Classis BM 32 B 489395 x x
Classis BM 32 W 489409 x x
Classis BM 32 SE 489387 x x
Classis BM 33 B 489425 x x x x x x x
Classis BM 33 W 489433 x x x x x x x
Classis BM 33 SE 489417 x x x x x x x
Classis BM 34 B 489360 x
Classis BM 34 W 489379 x
Classis BM 34 SE 489352 x
Classis BM 42 B 723789 x x x
Classis BM 42 BC 729507 x x x
Classis BM 42 W 723797 x x x
Classis BM 43 B 723800 x x
Classis BM 43 BC 729515 x x
Classis BM 43 W 723819 x x
Classis BM 52 729442 x
Classis BM 52 RC 729450 x x
MPC 70 USB 475548 x x x
Quinta TB 729604 x x
Classis OM 302 489263 x x x x x
Classis OM 304 489298 x x x x x x
Classis RM 30 729388 x XLR x x x x x x
Classis RM 30 W 729701 x XLR x x x x x x
Classis RM 31 SP 729396 x
Classis RM 31 RC 729825 x x
MPR 210 B 725145 x 3/8“ x x x x x
MPR 210 W 725080 x 3/8“ x x x x x
MPR 211 B 725099 x 3/8“ x x
Lect
ern
Vide
o co
nfer
enci
ng /
soun
d sy
stem
in t
he
room
(1
mic
roph
one
per
part
icip
ant)
Vide
o co
nfer
enci
ng /
no s
ound
sys
tem
in t
he
room
(1
mic
roph
one
for
seve
ral p
arti
cipa
nts)
Vide
o co
nfer
enci
ng c
eilin
g in
stal
lati
on,
no s
yste
m in
the
roo
m (
1 m
icro
phon
e fo
r se
vera
l par
tici
pant
s)
App
licat
ion
on s
tand
s
Dis
tanc
e le
arni
ng
Pan
el d
iscu
ssio
n / P
ress
con
fere
nce
Larg
e m
eeti
ng (
wit
h au
dio
DS
P)
Roo
m s
urve
illan
ce
Am
bian
ce m
icro
phon
e fo
r pi
ckin
g up
the
atm
osph
ere
Alt
ar /
Pul
pit
/ Am
bo
Sm
all m
eeti
ngs
(rec
ordi
ng)
(1 m
icro
phon
e fo
r se
vera
l par
tici
pant
s)
Pag
ing
Voic
e re
cord
ing
Cei
ling
mic
roph
one
App
licat
ions
on
the
arm
rest
s of
a c
hair
Sm
all t
heat
re s
tage
s
Web
con
fere
nce
/ PC
app
licat
ions
Dir
ect
conn
ecti
on t
o a
belt
pack
tra
nsm
itte
r
This overview is a recommendation and should serve as a decisive measure. The microphones, however, can be used as desired.
INSTALLED SOUND MICROPHONES APPLICATIONS
ACCESSORIES –
4010118
722721
>In
stal
led
Sou
nd M
icro
phon
es (
05
.20
16
) .
72
27
23
. 7
50
N
on-c
ontr
actu
al il
lust
rati
ons
. S
ubje
ct t
o ch
ange
wit
hout
not
ice
beyerdynamic GmbH & Co. KG . Theresienstr. 8 . 74072 Heilbronn . Germany . Phone +49 7131 617-400 . Fax +49 7131 617-199 . AudioSystems@beyerdynamic.debeyerdynamic Inc. USA . 56 Central Ave . Farmingdale, NY 11735 . Phone +1 631 29332-00 . Fax +1 631 29332-88 . salesUSA@beyerdynamic-usa.com
www.beyerdynamic.com
ST 600 (Order # 421316)Microphone stand with heavy foot, 3/8“ thread, adjustableheight 0.87 - 1.575 m
ZSH 210 (Order # 721832)Stand mount for MPR 210/211 microphones, 5/8” thread, 3/8” adapter, mat black
GMS 32 (Order # 729582) Shock-mounted installation holder for Classis GM and RM microphones with 3-pin XLR male connector, in black or white (GMS 32 w, 729760)
GMS 52 (Order # 729434) Shock-mounted installation holder for Classis GM and RM microphones with 5-pin XLR male connector, in black or white (GMS 52 w, 729779)
ZSH 20 (Order # 454559)Elastic holder for gooseneck microphones with male XLR connector, flush-mount, black, with counter nut
ZSA 305 (Order # 723037)Mounting adapter for GM 305 T, suitable for ZSH 20 holder
GMB 33 S (Order # 725242)Microphone base with 3-pin female XLR connector for gooseneck microphones and 3-pin male connector at the rear of the housing, on-off button backlit
GMB 35 S (Order # 725188)Microphone base with 5-pin female XLR connector for gooseneck microphones with LED ring and 5-pin male connector with logic inputs and outputs at the rear of the housing, on-off button backlit
BMR (Order # 725218)RGB indication ring for Classis BM / MPC series installation boundary microphones, including mounting kit
Quinta CB (Order # 729817) Charger for wireless Quinta TB boundary micro-phone, integrated magnets to connect several chargers mechanically
Coretis (Order # 729248) Digital signal processor (DSP) for processing, mixing and distribution of audio signalswww.beyerdynamic.com/coretis
steno-s 4 Conference (Order # 724262) Recording and logging software for meetingswww.steno-s.com
INSTALLED SOUND MICROPHONES ACCESSORIES
Recommended