View
3
Download
0
Category
Preview:
Citation preview
Page
www.dynabrackets.com Page info@dynabrackets.com
Issue 24
All catalogue products regularly in-stock! Most orders ship same day or next day! Price lists available that include free freight with no additional costs within Canada or USA! We take care of all customs and freight documentation for a hassle-free experience!
Page 2
www.dynabrackets.com Page 2 info@dynabrackets.com
Sign Brackets 4
Center Mount _________________________________________________________________________________ 4 All-Sign Top Mounts & Crosspieces ________________________________________________________________ 9 5-1/2” Top Mounts & Crosspieces ________________________________________________________________ 12 5” Notched Top Mounts & Crosspieces _____________________________________________________________ 17 12” Top Mounts & Crosspieces __________________________________________________________________ 21 4” Wood Post Mounts __________________________________________________________________________ 26 Overhead Sign Brackets ________________________________________________________________________ 27 All-Sign End Mounts ___________________________________________________________________________ 28 End Mounts __________________________________________________________________________________ 29 Cantilever Mounts _____________________________________________________________________________ 32 Post Clips & Sign Connectors ____________________________________________________________________ 33 Twin Sign Panel Mounting System ________________________________________________________________ 34
Stainless Steel Strapping, Buckles & Tools 35
Straps & Buckles _____________________________________________________________________________ 35 Bucklestraps _________________________________________________________________________________ 36 Tensioning Tools _____________________________________________________________________________ 37
General Information 3
Sign Post Accessories 38
Sign Post Breakaway Couplings & Caps ___________________________________________________________ 38 Drive Rivets & Sign Post Adapters ________________________________________________________________ 40 Concrete Barrier Saddles & Sign Post Bases _______________________________________________________ 41 Sign Spacers _________________________________________________________________________________ 42
Fasteners & Fastener Tools 43
Nuts _______________________________________________________________________________________ 43 Bolts _______________________________________________________________________________________ 44 Set Screws & Washers _________________________________________________________________________ 45 Fastener Tools _______________________________________________________________________________ 46
Work Zone Safety Equipment 48
Sign Stands & Barricade Legs ___________________________________________________________________ 48 Traffic Cones ________________________________________________________________________________ 49 Delineators __________________________________________________________________________________ 50 6V LED Barricade Lights _______________________________________________________________________ 51 D-CELL LED Barricade Lights ___________________________________________________________________ 52 Solar LED Barricade Lights _____________________________________________________________________ 53 LED Batons __________________________________________________________________________________ 54 Safety Flares _________________________________________________________________________________ 55
Work Zone Safety Accessories 56
For Barricade Lights ___________________________________________________________________________ 56 Reflective Sheeting ____________________________________________________________________________ 57
Traffic Signal Mounting Accessories 47
Clamshell Mounts, Push Button Cups & Signal Arms _________________________________________________ 47
Page 3
www.dynabrackets.com Page 3 info@dynabrackets.com
How To Place An Order You can place an order with us by phone, fax or email. What we need to know: 1) Your name and telephone number 2) The name of your organization (if applicable) 3) Your shipping and billing address (cannot ship to PO boxes) 4) What you’re looking for (use our part numbers for faster processing) 5) Your payment method (credit card, cheque prepayment and net 30 credit terms available) 6) Federal Tax ID number or SSN for customs clearance purposes (US customers only)
All catalogue products regularly in-stock! Most orders ship same day or next day! Price lists available that include free freight with no additional costs within Canada or USA! We take care of all customs and freight documentation for a hassle-free experience!
Page 4
www.dynabrackets.com Page 4 info@dynabrackets.com
HS Series Center Mount Sign Bracket This patented bracket design is perfect for single or back-to-back sign mounting on round posts. This design also allows for easy installation with only one typical 9/16” wrench. The HS series sign bracket is reusable and 360° adjustable to mount signs in any direction. Our design does not require any labor-intensive drilling into sign posts which eliminates damage to city property. These brackets are manufactured from extruded aluminum, which is extremely strong yet flexible enough to increase clamping pressure for a more safe and secure installation.
HS-1 Installation Specifications:
For Center-Mounting Signs • Sign-to-Post Installation • 3/8” Bolt Thru Sign Mounting • Clamps To 2-3/8” Round Posts
Part No: Fasteners Included:
HS-1 (U) None
HS-1-ZP Zinc Plated Nuts and Bolts
HS-1-SS Stainless Steel Nuts and Bolts
Pre-assembled as shown for convenience Additional 3/8” nuts and bolts are available for back-to-back sign mounting Vandal resistant nuts are available to reduce theft and vandalism
HS-178 Installation Specifications:
For Center-Mounting Signs • Sign-to-Post Installation • 3/8” Bolt Thru Sign Mounting • Clamps to 1-7/8” Round Posts
Part No: Fasteners Included:
HS-178 (U) None
HS-178 -ZP Zinc Plated Nuts and Bolts
HS-178 -SS Stainless Steel Nuts and Bolts
Pre-assembled as shown for convenience Additional 3/8” nuts and bolts are available for back-to-back sign mounting Vandal resistant nuts are available to reduce theft and vandalism
HS-4 Installation Specifications:
For Center-Mounting Signs • Sign-to-Post Installation • 3/8” Bolt Thru Sign Mounting • Clamps to 4” Round Posts
Part No: Fasteners Included:
HS-4 (U) None
HS-4-ZP Zinc Plated Nuts and Bolts
HS-4-SS Stainless Steel Nuts and Bolts
Pre-assembled as shown for convenience Additional 3/8” nuts and bolts are available for back-to-back sign mounting Vandal resistant nuts are available to reduce theft and vandalism
Page 5
www.dynabrackets.com Page 5 info@dynabrackets.com
Z-Series Center Mount Sign Bracket This interlocking sign bracket is used to center mount signs onto 2 3/8”, 2-7/8”, 3”, 4”, 4-1/2” round posts. It features a built-in sign support and is also tested to be secure against high wind speeds. A back-to-back attachment is also available for the 2-3/8” size. This sign bracket is reusable and 360° adjustable to mount signs in any direction. Our design does not require any labour-intensive drilling into sign posts which eliminates damage to city property. These brackets are manufactured from extruded aluminum, which is extremely strong yet flexible enough to increase clamping pressure for a more safe and secure installation.
Z238-4.5R1.00 Installation Specifications:
For Center-Mounting Signs • Sign-to-Post Installation • 5/16” Bolt Thru Sign Mounting • Clamps To 2-3/8” Round Posts
Part No: Fasteners Included:
Z238-4.5R1.00 (U) None
Z238-4.5R1.00 (ZP) Zinc Plated Nuts and Bolts
Z238-4.5R1.00 (SS) Stainless Steel Nuts and Bolts
Built-in 4.5” backing for extra sign support Z238-4.5BB1.00 bracket is available for back-to-back sign mounting Vandal resistant nuts and bolts are available to reduce theft and vandalism
Z238-4.5BB1.00 Installation Specifications:
For Back-to-Back Sign Mounting • Sign-to-Bracket Installation • 5/16” Bolt Thru Sign Mounting • Bolts to Z238-4.5R1.00
Part No: Fasteners Included:
Z238-4.5BB1.00 (U) None
Z238-4.5BB1.00 (ZP) Zinc Plated Nuts and Bolts
Z238-4.5BB1.00 (SS) Stainless Steel Nuts and Bolts
Built-in 4.5” backing for extra sign support Works with Z238-4.5R1.00 series brackets Vandal resistant nuts are available to reduce theft and vandalism
Page 6
www.dynabrackets.com Page 6 info@dynabrackets.com
Z300-7.5R1.25 Installation Specifications:
For Center-Mounting Signs • Sign-to-Post Installation • 5/16” Bolt Thru Sign Mounting • Clamps To 2-7/8” and 3” Round Posts
Part No: Fasteners Included:
Z300-7.5R1.25 (U) None
Z300-7.5R1.25 (ZP) Zinc Plated Nuts and Bolts
Z300-7.5R1.25 (SS) Stainless Steel Nuts and Bolts
Built-in 7.5” backing for extra sign support Vandal resistant nuts and bolts are available to reduce theft and vandalism
Z400-7.5R1.25 Installation Specifications:
For Back-to-Back Sign Mounting • Sign-to-Post Installation • 5/16” Bolt Thru Sign Mounting • Clamps To 4” Round Posts
Part No: Fasteners Included:
Z400-7.5R1.25 (U) None
Z400-7.5R1.25 (ZP) Zinc Plated Nuts and Bolts
Z400-7.5R1.25 (SS) Stainless Steel Nuts and Bolts
Built-in 7.5” backing for extra sign support Vandal resistant nuts are available to reduce theft and vandalism
Z412-7.5R1.25 Installation Specifications:
For Back-to-Back Sign Mounting • Sign-to-Post Installation • 5/16” Bolt Thru Sign Mounting • Clamps To 4-1/2” Round Posts
Part No: Fasteners Included:
Z412-7.5R1.25 (U) None
Z412-7.5R1.25 (ZP) Zinc Plated Nuts and Bolts
Z412-7.5R1.25 (SS) Stainless Steel Nuts and Bolts
Built-in 4.5” backing for extra sign support Vandal resistant nuts are available to reduce theft and vandalism
Page 7
www.dynabrackets.com Page 7 info@dynabrackets.com
SB-008 Installation Specifications:
For Center-Mounting Signs • Sign-to-Post Installation • 5/16” Bolt Thru Sign Mounting • Straps To 4”+ Round, 2-1/2”+ Square, All Lamp Posts Fits Up To 3/4” Wide Band
Part No: Fasteners Included:
SB-008 (U) None
SB-008 (SS) Stainless Steel Bolts and Washers and Nylon Washers
Holes of bracket are threaded so there is no need for nuts Vandal resistant bolts are available to reduce theft and vandalism
FB-021 D021 Installation Specifications:
For Center-Mounting Signs • Sign-to-Post Installation • 5/16” Bolt Thru Sign Mounting • Straps To 4”+ Round, 2-1/2”+ Square, All Lamp Posts Dyna Brand
Fits Up To 3/4” Wide Band Band-It Brand Fits Up To 3/4” Wide Band
Part No: Part No: Fasteners Included:
FB-021 (U) - None
FB-021 (SS) D021 Stainless Steel Bolts and Washers and Nylon Washers
Center hole of bracket is threaded so there is no need for a nut Vandal resistant bolts are available to reduce theft and vandalism
SB-001 D001 Installation Specifications:
For Center-Mounting Signs • Sign-to-Post Installation • 5/16” Bolt Thru Sign Mounting • Straps To 2-4” Round, 2”+ Square, All Lamp Posts Dyna Brand
Fits Up To 3/4” Wide Band Band-It Brand Fits Up To 3/4” Wide Band
Part No: Part No: Fasteners Included:
SB-001 (U) - None
SB-001 (SS) D001 Stainless Steel Bolts and Washers and Nylon Washers
Center hole of bracket is threaded so there is no need for a nut Vandal resistant bolts are available to reduce theft and vandalism
Page 8
www.dynabrackets.com Page 8 info@dynabrackets.com
BB-12 Installation Specifications:
For Center-Mounting Signs • Sign-to-Post Installation • 3/8” Bolt Thru Sign Mounting: - 10” Center to Center • Straps To 1-1/2”+ Round, 1-1/2”+ Square, All Lamp Posts
Fits Up To 3/4” Wide Band
Part No: Fasteners Included:
BB-12 (U) None
BB-12 (ZP) Zinc Plated Nuts and Bolts
BB-12 (SS) Stainless Steel Nuts and Bolts
12” sign support backing Vandal resistant nuts and bolts are available to reduce theft and vandalism
FB-310 Installation Specifications:
For Center-Mounting Signs • Sign-to-Post Installation • 5/16” Bolt Thru Sign Mounting • Straps To 2”+ Round, 2”+ Square, All Lamp Posts Fits Up To 1/2” Wide Band
Part No: Fasteners Included:
FB-310 (U) None
FB-310 (SS) Stainless Steel Bolts and Washers and Nylon Washers
Center hole of bracket is threaded so there is no need for a nut Vandal resistant bolts are available to reduce theft and vandalism
Page 9
www.dynabrackets.com Page 9 info@dynabrackets.com
All-Sign Top Mounts & Crosspieces This unique line of top mounts and crosspieces use a bolt thru style sign mounting without a sign slot. This way it is compatible with both standard flat and extruded signs as well as any thickness of other signs.
3A-CA360 Installation Specifications:
For Stacking Signs At 360° • Sign-to-Sign Installation • 3/8” Bolt Thru Sign Mounting • 360° Adjustable
Part No: Fasteners Included:
3A-CA360 (U) None
3A-CA360 (ZP) Zinc Plated Hex Nuts and Bolts
3A-CA360 (SS) Stainless Steel Hex Nuts and Bolts
3A-R178S134A Installation Specifications:
For Top-Mounting Signs • Sign-to-Post Installation • 3/8” Bolt Thru Sign Mounting • Set Screws To 1-7/8” Round Posts and 1-3/4” Square Posts • 360° Adjustable
Part No: Fasteners Included:
3A-R178S134A (U) None
3A-R178S134A (ZP) Zinc Plated Set Screws, Nuts and Bolts
3A-R178S134A (SS) Stainless Steel Set Screws, Nuts and Bolts
Page 10
www.dynabrackets.com Page 10 info@dynabrackets.com
3A-R238S200A Installation Specifications:
For Top-Mounting Signs • Sign-to-Post Installation • 3/8” Bolt Thru Sign Mounting • Set Screws To 2-3/8” Round Posts and 2” Square Posts • 360° Adjustable
Part No: Fasteners Included:
3A-R238S200A (U) None
3A-R238S200A (ZP) Zinc Plated Set Screws, Nuts and Bolts
3A-R238S200A (SS) Stainless Steel Set Screws, Nuts and Bolts
3A-R278S214A Installation Specifications:
For Top-Mounting Signs • Sign-to-Post Installation • 3/8” Bolt Thru Sign Mounting • Set Screws To 2-7/8” Round Posts and 2-1/4” Square Posts • 360° Adjustable
Part No: Fasteners Included:
3A-R278S214A (U) None
3A-R278S214A (ZP) Zinc Plated Set Screws, Nuts and Bolts
3A-R278S214A (SS) Stainless Steel Set Screws, Nuts and Bolts
Page 11
www.dynabrackets.com Page 11 info@dynabrackets.com
3A-U360A-200 Installation Specifications:
For Top-Mounting Signs • Sign-to-Post Installation • 3/8” Bolt Thru Sign Mounting • Bolts To U-Channel (1” Hole Centers) • 360° Adjustable
Part No: Fasteners Included:
3A-U360A-200 (U) None
3A-U360A-200 (ZP) Zinc Plated Set Screws, Nuts and Bolts
3A-U360A-200 (SS) Stainless Steel Set Screws, Nuts and Bolts
3A-U360A-300 Installation Specifications:
For Top-Mounting Signs • Sign-to-Post Installation • 3/8” Bolt Thru Sign Mounting • Bolts To U-Channel (2” Hole Centers) • 360° Adjustable
Part No: Fasteners Included:
3A-U360A-300 (U) None
3A-U360A-300 (ZP) Zinc Plated Set Screws, Nuts and Bolts
3A-U360A-300 (SS) Stainless Steel Set Screws, Nuts and Bolts
Page 12
www.dynabrackets.com Page 12 info@dynabrackets.com
5-1/2” Top Mounts & Crosspieces By far the most widely used style of sign brackets in North America, Dyna Engineering’s line of 5-1/2” sign brackets are manufactured from high-pressure die cast aluminum. All brackets undergo a low-sheen vibratory polishing allowing for easy handling without sharp corners while leaving an attractive surface finish. Brackets are available in this style for post mounting signs to round, U-channel or square posts. Designed with a bolt clearance hole, these brackets can mount signs by bolt thru or set screw. For sign installations using set screws, only 25-40 inch pounds of torque is required to safely secure a sign.
5-CX90 Installation Specifications: 5-CF90
• Sign-to-Sign Installation • 5/16” Set Screw or Bolt Thru Sign Mounting - 3-1/2” Center to Center - 3/8” From Bottom Edge to Center
For Stacking Signs At 90°
Sign Angle: 90° Slot Width: 0.305”
Sign Angle: 90° Slot Width: 0.175”
Part No: Part No: Fasteners Included:
5-CX90 (U) 5-CF90 (U) None
5-CX90 (ZP) 5-CF90 (ZP) Zinc Plated Set Screws
5-CX90 (ZPV) 5-CF90 (ZPV) Zinc Plated Vandal Resistant Set Screws*
5-CX90 (ZPVB) 5-CF90 (ZPVB) Zinc Plated Vandal Resistant Bolts*
5-CX90 (SS) 5-CF90 (SS) Stainless Steel Set Screws
5-CX90 (SSV) 5-CF90 (SSV) Stainless Steel Vandal Resistant Set Screws*
5-CX90 (SSVB) 5-CF90 (SSVB) Stainless Steel Vandal Resistant Bolts*
5-1/2” Sign Holder *HK-532P pin-hole hex key included with every order of brackets with vandal resistant fasteners
5A-CX360 Installation Specifications: 5A-CF360
• Sign-to-Sign Installation • 5/16” Set Screw or Bolt Thru Sign Mounting - 3-1/2” Center to Center - 3/8” From Bottom Edge to Center • 360° Adjustable
For Stacking Signs At 360°
Slot Width: 0.305”
Slot Width: 0.175”
Part No: Part No: Fasteners Included:
5A-CX360 (U) 5A-CF360 (U) None
5A-CX360 (ZP) 5A-CF360 (ZP) Zinc Plated Set Screws
5A-CX360 (ZPV) 5A-CF360 (ZPV) Zinc Plated Vandal Resistant Set Screws*
5A-CX360 (ZPVB) 5A-CF360 (ZPVB) Zinc Plated Vandal Resistant Bolts*
5A-CX360 (SS) 5A-CF360 (SS) Stainless Steel Set Screws
5A-CX360 (SSV) 5A-CF360 (SSV) Stainless Steel Vandal Resistant Set Screws*
5A-CX360 (SSVB) 5A-CF360 (SSVB) Stainless Steel Vandal Resistant Bolts*
5-1/2” Sign Holder *HK-532P pin-hole hex key included with every order of brackets with vandal resistant fasteners
Page 13
www.dynabrackets.com Page 13 info@dynabrackets.com
5A-R178S134X Installation Specifications: 5A-R178S134F
• Sign-to-Post Installation • 5/16” Set Screw or Bolt Thru Sign Mounting - 3-1/2” Center to Center - 3/8” From Bottom Edge to Center • Set Screws To 1-7/8” round posts and 1-3/4” Square Posts • 360° Adjustable
For Top-Mounting Signs
Slot Width: 0.305”
Slot Width: 0.175”
Part No: Part No: Fasteners Included:
5A-R178S134X (U) 5A-R178S134F (U) None
5A-R178S134X (ZP) 5A-R178S134F (ZP) Zinc Plated Set Screws
5A-R178S134X (ZPV) 5A-R178S134F (ZPV) Zinc Plated Vandal Resistant Set Screws*
5A-R178S134X (ZPVB) 5A-R178S134F (ZPVB) Zinc Plated Vandal Resistant Set Screws and Bolts*
5A-R178S134X (SS) 5A-R178S134F (SS) Stainless Steel Set Screws
5A-R178S134X (SSV) 5A-R178S134F (SSV) Stainless Steel Vandal Resistant Set Screws*
5A-R178S134X (SSVB) 5A-R178S134F (SSVB) Stainless Steel Vandal Resistant Set Screws and Bolts*
5-1/2” Sign Holder *HK-532P pin-hole hex key included with every order of brackets with vandal resistant fasteners
5A-R238S200X Installation Specifications: 5A-R238S200F
• Sign-to-Post Installation • 5/16” Set Screw or Bolt Thru Sign Mounting - 3-1/2” Center to Center - 3/8” From Bottom Edge to Center • Set Screws To 2-3/8” round posts and 2” Square Posts • 360° Adjustable
For Top-Mounting Signs
Slot Width: 0.305”
Slot Width: 0.175”
Part No: Part No: Fasteners Included:
5A-R238S200X (U) 5A-R238S200F(U) None
5A-R238S200X (ZP) 5A-R238S200F(ZP) Zinc Plated Set Screws
5A-R238S200X (ZPV) 5A-R238S200F(ZPV) Zinc Plated Vandal Resistant Set Screws*
5A-R238S200X (ZPVB) 5A-R238S200F(ZPVB) Zinc Plated Vandal Resistant Set Screws and Bolts*
5A-R238S200X (SS) 5A-R238S200F(SS) Stainless Steel Set Screws
5A-R238S200X (SSV) 5A-R238S200F(SSV) Stainless Steel Vandal Resistant Set Screws*
5A-R238S200X (SSVB) 5A-R238S200F(SSVB) Stainless Steel Vandal Resistant Set Screws and Bolts*
5-1/2” Sign Holder *HK-532P pin-hole hex key included with every order of brackets with vandal resistant fasteners
Page 14
www.dynabrackets.com Page 14 info@dynabrackets.com
5A-R278S214X Installation Specifications: 5A-R278S214F
• Sign-to-Post Installation • 5/16” Set Screw or Bolt Thru Sign Mounting - 3-1/2” Center to Center - 3/8” From Bottom Edge to Center • Set Screws To 2-7/8” round posts and 2-1/4” Square Posts • 360° Adjustable
For Top-Mounting Signs
Slot Width: 0.305”
Slot Width: 0.175”
Part No: Part No: Fasteners Included:
5A-R278S214X (U) 5A-R278S214F (U) None
5A-R278S214X (ZP) 5A-R278S214F (ZP) Zinc Plated Set Screws
5A-R278S214X (ZPV) 5A-R278S214F (ZPV) Zinc Plated Vandal Resistant Set Screws*
5A-R278S214X (ZPVB) 5A-R278S214F (ZPVB) Zinc Plated Vandal Resistant Set Screws and Bolts*
5A-R278S214X (SS) 5A-R278S214F (SS) Stainless Steel Set Screws
5A-R278S214X (SSV) 5A-R278S214F (SSV) Stainless Steel Vandal Resistant Set Screws*
5A-R278S214X SSVB) 5A-R278S214F (SSVB) Stainless Steel Vandal Resistant Set Screws and Bolts*
5-1/2” Sign Holder *HK-532P pin-hole hex key included with every order of brackets with vandal resistant fasteners
5-R238S200X Installation Specifications: 5-R238S200F
• Sign-to-Post Installation • 5/16” Set Screw or Bolt Thru Sign Mounting - 3-1/2” Center to Center - 3/8” From Bottom Edge to Center • Set Screws To 2-3/8” round posts and 2” Square Posts
For Top-Mounting Signs
Slot Width: 0.305”
Slot Width: 0.175”
Part No: Part No: Fasteners Included:
5-R238S200X (U) 5-R238S200F (U) None
5-R238S200X (ZP) 5-R238S200F (ZP) Zinc Plated Set Screws
5-R238S200X (ZPV) 5-R238S200F (ZPV) Zinc Plated Vandal Resistant Set Screws*
5-R238S200X (ZPVB) 5-R238S200F (ZPVB) Zinc Plated Vandal Resistant Set Screws and Bolts*
5-R238S200X (SS) 5-R238S200F (SS) Stainless Steel Set Screws
5-R238S200X (SSV) 5-R238S200F (SSV) Stainless Steel Vandal Resistant Set Screws*
5-R238S200X (SSVB) 5-R238S200F (SSVB) Stainless Steel Vandal Resistant Set Screws and Bolts*
5-1/2” Sign Holder *HK-532P pin-hole hex key included with every order of brackets with vandal resistant fasteners
Page 15
www.dynabrackets.com Page 15 info@dynabrackets.com
5-SX134 Installation Specifications: 5-SF134
• Sign-to-Post Installation • 5/16” Set Screw or Bolt Thru Sign Mounting - 3-1/2” Center to Center - 3/8” From Bottom Edge to Center • Set Screws To 1-3/4” Square Posts
For Top-Mounting Signs
Slot Width: 0.305”
Slot Width: 0.175”
Part No: Part No: Fasteners Included:
5-SX134 (U) 5-SF134 (U) None
5-SX134 (ZP) 5-SF134 (ZP) Zinc Plated Set Screws
5-SX134 (ZPV) 5-SF134 (ZPV) Zinc Plated Vandal Resistant Set Screws*
5-SX134 (ZPVB) 5-SF134 (ZPVB) Zinc Plated Vandal Resistant Set Screws and Bolts*
5-SX134 (SS) 5-SF134 (SS) Stainless Steel Set Screws
5-SX134 (SSV) 5-SF134 (SSV) Stainless Steel Vandal Resistant Set Screws*
5-SX134 (SSVB) 5-SF134 (SSVB) Stainless Steel Vandal Resistant Set Screws and Bolts*
5-1/2” Sign Holder *HK-532P pin-hole hex key included with every order of brackets with vandal resistant fasteners
5-R178S134X Installation Specifications: 5-R178S134F
• Sign-to-Post Installation • 5/16” Set Screw or Bolt Thru Sign Mounting - 3-1/2” Center to Center - 3/8” From Bottom Edge to Center • Set Screws To 1-7/8” round posts and 1-3/4” Square Posts
For Top-Mounting Signs
Slot Width: 0.305”
Slot Width: 0.175”
Part No: Part No: Fasteners Included:
5-R178S134X (U) 5-R178S134F (U) None
5-R178S134X (ZP) 5-R178S134F (ZP) Zinc Plated Set Screws
5-R178S134X (ZPV) 5-R178S134F (ZPV) Zinc Plated Vandal Resistant Set Screws*
5-R178S134X (ZPVB) 5-R178S134F (ZPVB) Zinc Plated Vandal Resistant Set Screws and Bolts*
5-R178S134X (SS) 5-R178S134F (SS) Stainless Steel Set Screws
5-R178S134X (SSV) 5-R178S134F (SSV) Stainless Steel Vandal Resistant Set Screws*
5-R178S134X (SSVB) 5-R178S134F (SSVB) Stainless Steel Vandal Resistant Set Screws and Bolts*
5-1/2” Sign Holder *HK-532P pin-hole hex key included with every order of brackets with vandal resistant fasteners
Coming soon!
Page 16
www.dynabrackets.com Page 16 info@dynabrackets.com
5A-U360X-200 Installation Specifications: 5A-U360F-200
• Sign-to-Post Installation • 5/16” Set Screw or Bolt Thru Sign Mounting - 3-1/2” Center to Center - 3/8” From Bottom Edge to Center • Bolts To U-Channel (1” Hole Centers) • 360° Adjustable
For Top-Mounting Signs
Slot Width: 0.305”
Slot Width: 0.175”
Part No: Part No: Fasteners Included:
5A-U360X-200 (U) 5A-U360F-200 (U) None
5A-U360X-200 (ZP) 5A-U360F-200 (ZP) Zinc Plated Set Screws and Bolts
5A-U360X-200 ZPV) 5A-U360F-200 (ZPV) Zinc Plated Vandal Resistant Set Screws and Bolts*
5A-U360X-200 (ZPVB) 5A-U360F-200 (ZPVB) Zinc Plated Vandal Resistant Set Screws and Bolts*
5A-U360X-200 (SS) 5A-U360F-200 (SS) Stainless Steel Set Screws and Bolts
5A-U360X-200 (SSV) 5A-U360F-200 (SSV) Stainless Steel Vandal Resistant Set Screws and Bolts*
5A-U360X-200 SSVB) 5A-U360F-200 (SSVB) Stainless Steel Vandal Resistant Set Screws and Bolts*
5-1/2” Sign Holder *HK-532P pin-hole hex key included with every order of brackets with vandal resistant fasteners
5A-U360X-300 Installation Specifications: 5A-U360F-300
• Sign-to-Post Installation • 5/16” Set Screw or Bolt Thru Sign Mounting - 3-1/2” Center to Center - 3/8” From Bottom Edge to Center • Bolts To U-Channel (2” Hole Centers) • 360° Adjustable
For Top-Mounting Signs
Slot Width: 0.305”
Slot Width: 0.175”
Part No: Part No: Fasteners Included:
5A-U360X-300 (U) 5A-U360F-300 (U) None
5A-U360X-300 (ZP) 5A-U360F-300 (ZP) Zinc Plated Set Screws and Bolts
5A-U360X-300 (ZPV) 5A-U360F-300 (ZPV) Zinc Plated Vandal Resistant Set Screws and Bolts*
5A-U360X-300 (ZPVB) 5A-U360F-300 (ZPVB) Zinc Plated Vandal Resistant Set Screws and Bolts*
5A-U360X-300 (SS) 5A-U360F-300 (SS) Stainless Steel Set Screws and Bolts
5A-U360X-300 SSV) 5A-U360F-300 (SSV) Stainless Steel Vandal Resistant Set Screws and Bolts*
5A-U360X-300 (SSVB) 5A-U360F-300 (SSVB) Stainless Steel Vandal Resistant Set Screws and Bolts*
5-1/2” Sign Holder *HK-532P pin-hole hex key included with every order of brackets with vandal resistant fasteners
Page 17
www.dynabrackets.com Page 17 info@dynabrackets.com
5” Notched Top Mounts & Crosspieces A great design to keep signs held more securely inside of the sign slot. These notched style locking brackets are designed so that the sign blade must be loaded into the bracket by sliding the sign into the slot sideways instead of from the top. Dyna Engineering’s line of 5” sign brackets are manufactured from high-pressure die cast aluminum. All brackets undergo a low-sheen vibratory polishing allowing for easy handling without sharp corners while leaving an attractive surface finish. Brackets are available in this style for post mounting signs to round, U-channel or square posts. For sign installations using set screws, only 25-40 inch pounds of torque is required to safely secure a sign.
8-CX90 Installation Specifications:
For Stacking Signs At 90° • Sign-to-Sign Installation • 5/16” Set Screw Sign Mounting
Sign Angle: 90° Slot Width: 0.305”
Part No: Fasteners Included:
8-CX90 (U) None
8-CX90 (ZP) Zinc Plated Set Screws
8-CX90 (ZPV) Zinc Plated Vandal Resistant Set Screws*
8-CX90 (ZPHB) Zinc Plated Hex Bolts
8-CX90 (SS) Stainless Steel Set Screws
8-CX90 (SSV) Stainless Steel Vandal Resistant Set Screws*
8-CX90 (SSHB) Stainless Steel Hex Bolts
5” Sign Holder *HK-532P pin-hole hex key included with every order of brackets with vandal resistant fasteners
8A-CX360 Installation Specifications:
For Stacking Signs At 360° • Sign-to-Sign Installation • 5/16” Set Screw Sign Mounting • 360° Adjustable
Slot Width: 0.305”
Part No: Fasteners Included:
8A-CX360 (U) None
8A-CX360 (ZP) Zinc Plated Set Screws
8A-CX360 (ZPV) Zinc Plated Vandal Resistant Set Screws*
8A-CX360 (ZPHB) Zinc Plated Hex Bolts
8A-CX360 (SS) Stainless Steel Set Screws
8A-CX360 (SSV) Stainless Steel Vandal Resistant Set Screws*
8A-CX360 (SSHB) Stainless Steel Hex Bolts
5” Sign Holder *HK-532P pin-hole hex key included with every order of brackets with vandal resistant fasteners
Page 18
www.dynabrackets.com Page 18 info@dynabrackets.com
8A-R178S134X Installation Specifications:
For Top-Mounting Signs • Sign-to-Post Installation • 5/16” Set Screw Sign Mounting • Set Screws To 1-7/8” Round Posts and 1-3/4” Square Posts • 360° Adjustable
Slot Width: 0.305”
Part No: Fasteners Included:
8A-R178S134X (U) None
8A-R178S134X (ZP) Zinc Plated Set Screws
8A-R178S134X (ZPV) Zinc Plated Vandal Resistant Set Screws*
8A-R178S134X (ZPHB) Zinc Plated Hex Bolts
8A-R178S134X (SS) Stainless Steel Set Screws
8A-R178S134X (SSV) Stainless Steel Vandal Resistant Set Screws*
8A-R178S134X (SSHB) Stainless Steel Hex Bolts
5” Sign Holder *HK-532P pin-hole hex key included with every order of brackets with vandal resistant fasteners
8A-R238S200X Installation Specifications:
For Top-Mounting Signs • Sign-to-Post Installation • 5/16” Set Screw Sign Mounting • Set Screws To 2-3/8” Round Posts and 2” Square Posts • 360° Adjustable
Slot Width: 0.305”
Part No: Fasteners Included:
8A-R238S200X (U) None
8A-R238S200X (ZP) Zinc Plated Set Screws
8A-R238S200X (ZPV) Zinc Plated Vandal Resistant Set Screws*
8A-R238S200X (ZPHB) Zinc Plated Hex Bolts
8A-R238S200X (SS) Stainless Steel Set Screws
8A-R238S200X (SSV) Stainless Steel Vandal Resistant Set Screws*
8A-R238S200X (SSHB) Stainless Steel Hex Bolts
5” Sign Holder *HK-532P pin-hole hex key included with every order of brackets with vandal resistant fasteners
Page 19
www.dynabrackets.com Page 19 info@dynabrackets.com
8A-R278S214X Installation Specifications:
For Top-Mounting Signs • Sign-to-Post Installation • 5/16” Set Screw Sign Mounting • Set Screws To 2-7/8” Round Posts and 2-1/4” Square Posts • 360° Adjustable
Slot Width: 0.305”
Part No: Fasteners Included:
8A-R278S214X (U) None
8A-R278S214X (ZP) Zinc Plated Set Screws
8A-R278S214X (ZPV) Zinc Plated Vandal Resistant Set Screws*
8A-R278S214X (ZPHB) Zinc Plated Hex Bolts
8A-R278S214X (SS) Stainless Steel Set Screws
8A-R278S214X (SSV) Stainless Steel Vandal Resistant Set Screws*
8A-R278S214X (SSHB) Stainless Steel Hex Bolts
5” Sign Holder *HK-532P pin-hole hex key included with every order of brackets with vandal resistant fasteners
8A-U360X-200 Installation Specifications:
For Top-Mounting Signs • Sign-to-Post Installation • 5/16” Set Screw or Bolt Thru Sign Mounting - 3-1/2” Center to Center - 3/8” From Bottom Edge to Center • Bolts To U-Channel (1” Hole Centers) • 360° Adjustable
Slot Width: 0.305”
Part No: Fasteners Included:
8A-U360X-200 (U) None
8A-U360X-200 (ZP) Zinc Plated Set Screws and Bolts
8A-U360X-200 (ZPV) Zinc Plated Vandal Resistant Set Screws and Bolts*
8A-U360X-200 (ZPHB) Zinc Plated Hex Bolts
8A-U360X-200 (SS) Stainless Steel Set Screws and Bolts
8A-U360X-200 (SSV) Stainless Steel Vandal Resistant Set Screws and Bolts*
8A-U360X-200 (SSHB) Stainless Steel Hex Bolts
5” Sign Holder *HK-532P pin-hole hex key included with every order of brackets with vandal resistant fasteners
Page 20
www.dynabrackets.com Page 20 info@dynabrackets.com
8A-U360X-300 Installation Specifications:
For Top-Mounting Signs • Sign-to-Post Installation • 5/16” Set Screw or Bolt Thru Sign Mounting - 3-1/2” Center to Center - 3/8” From Bottom Edge to Center • Bolts To U-Channel (2” Hole Centers) • 360° Adjustable
Slot Width: 0.305”
Part No: Fasteners Included:
8A-U360X-300 (U) None
8A-U360X-300 (ZP) Zinc Plated Set Screws and Bolts
8A-U360X-300 (ZPV) Zinc Plated Vandal Resistant Set Screws and Bolts*
8A-U360X-300 (ZPHB) Zinc Plated Hex Bolts
8A-U360X-300 (SS) Stainless Steel Set Screws and Bolts
8A-U360X-300 (SSV) Stainless Steel Vandal Resistant Set Screws and Bolts*
8A-U360X-300 (SSHB) Stainless Steel Hex Bolts
5” Sign Holder *HK-532P pin-hole hex key included with every order of brackets with vandal resistant fasteners
Page 21
www.dynabrackets.com Page 21 info@dynabrackets.com
12” Top Mounts & Crosspieces Designed for the need of increasingly larger signs, these brackets can accommodate standard 9” tall street name signs. Dyna Engineering’s line of 12” length sign brackets are manufactured from high-pressure die cast aluminum. All brackets undergo a low-sheen vibratory polishing allowing for easy handling without sharp corners while leaving an attractive surface finish. Brackets are available in this style for post mounting signs to round, U-channel or square posts. Designed with a bolt clearance hole, these brackets can mount signs by bolt thru or set screw. For sign installations using set screws, only 25-40 inch pounds of torque is required to safely secure a sign.
12-CX90 Installation Specifications: 12-CF90
• Sign-to-Sign Installation • 5/16” Set Screw or Bolt Thru Sign Mounting - 8” Center to Center - 3/8” From Bottom Edge to Center
For Stacking Signs At 90°
Sign Angle: 90° Slot Width: 0.320”
Sign Angle: 90° Slot Width: 0.195”
Part No: Part No: Fasteners Included:
12-CX90 (U) 12-CF90 (U) None
12-CX90 (ZP) 12-CF90 (ZP) Zinc Plated Set Screws
12-CX90 (ZPV) 12-CF90 (ZPV) Zinc Plated Vandal Resistant Set Screws*
12-CX90 (ZPVB) 12-CF90 (ZPVB) Zinc Plated Vandal Resistant Bolts*
12-CX90 (SS) 12-CF90 (SS) Stainless Steel Set Screws
12-CX90 (SSV) 12-CF90 (SSV) Stainless Steel Vandal Resistant Set Screws*
12-CX90 (SSVB) 12-CF90 (SSVB) Stainless Steel Vandal Resistant Bolts*
12” Sign Holder *HK-532P pin-hole hex key included with every order of brackets with vandal resistant fasteners
12A-CX360 Installation Specifications: 12A-CF360
• Sign-to-Sign Installation • 5/16” Set Screw or Bolt Thru Sign Mounting - 8” Center to Center - 3/8” From Bottom Edge to Center • 360° Adjustable
For Stacking Signs At 360°
Slot Width: 0.320”
Slot Width: 0.195”
Part No: Part No: Fasteners Included:
12A-CX360 (U) 12A-CF360 (U) None
12A-CX360 (ZP) 12A-CF360 (ZP) Zinc Plated Set Screws
12A-CX360 (ZPV) 12A-CF360 (ZPV) Zinc Plated Vandal Resistant Set Screws*
12A-CX360 (ZPVB) 12A-CF360 (ZPVB) Zinc Plated Vandal Resistant Bolts*
12A-CX360 (SS) 12A-CF360 (SS) Stainless Steel Set Screws
12A-CX360 (SSV) 12A-CF360 (SSV) Stainless Steel Vandal Resistant Set Screws*
12A-CX360 (SSVB) 12A-CF360 (SSVB) Stainless Steel Vandal Resistant Bolts*
12” Sign Holder *HK-532P pin-hole hex key included with every order of brackets with vandal resistant fasteners
Page 22
www.dynabrackets.com Page 22 info@dynabrackets.com
12A-R178S134X Installation Specifications: 12A-R178S134F
• Sign-to-Post Installation • 5/16” Set Screw or Bolt Thru Sign Mounting - 8” Center to Center - 3/8” From Bottom Edge to Center • Set Screws To 1-7/8” Round Posts and 1-3/4” Square Posts • 360° Adjustable
For Top-Mounting Signs
Slot Width: 0.320”
Slot Width: 0.195”
Part No: Part No: Fasteners Included:
12A-R178S134X (U) 12A-R178S134F (U) None
12A-R178S134X (ZP) 12A-R178S134F (ZP) Zinc Plated Set Screws
12A-R178S134X (ZPV) 12A-R178S134F (ZPV) Zinc Plated Vandal Resistant Set Screws*
12A-R178S134X (ZPVB) 12A-R178S134F (ZPVB) Zinc Plated Vandal Resistant Set Screws and Bolts*
12A-R178S134X (SS) 12A-R178S134F (SS) Stainless Steel Set Screws
12A-R178S134X (SSV) 12A-R178S134F (SSV) Stainless Steel Vandal Resistant Set Screws*
12A-R178S134X (SSVB) 12A-R178S134F (SSVB) Stainless Steel Vandal Resistant Set Screws and Bolts*
12” Sign Holder *HK-532P pin-hole hex key included with every order of brackets with vandal resistant fasteners
12A-R238S200X Installation Specifications: 12A-R238S200F
• Sign-to-Post Installation • 5/16” Set Screw or Bolt Thru Sign Mounting - 8” Center to Center - 3/8” From Bottom Edge to Center • Set Screws To 2-3/8” Round Posts and 2” Square Posts • 360° Adjustable
For Top-Mounting Signs
Slot Width: 0.320”
Slot Width: 0.195”
Part No: Part No: Fasteners Included:
12A-R238S200X (U) 12A-R238S200F (U) None
12A-R238S200X (ZP) 12A-R238S200F (ZP) Zinc Plated Set Screws
12A-R238S200X (ZPV) 12A-R238S200F (ZPV) Zinc Plated Vandal Resistant Set Screws*
12A-R238S200X (ZPVB) 12A-R238S200F (ZPVB) Zinc Plated Vandal Resistant Set Screws and Bolts*
12A-R238S200X (SS) 12A-R238S200F (SS) Stainless Steel Set Screws
12A-R238S200X (SSV) 12A-R238S200F SSV) Stainless Steel Vandal Resistant Set Screws*
12A-R238S200X (SSVB) 12A-R238S200F (SSVB) Stainless Steel Vandal Resistant Set Screws and Bolts*
12” Sign Holder *HK-532P pin-hole hex key included with every order of brackets with vandal resistant fasteners
Page 23
www.dynabrackets.com Page 23 info@dynabrackets.com
12A-R278S214X Installation Specifications: 12A-R278S214F
• Sign-to-Post Installation • 5/16” Set Screw or Bolt Thru Sign Mounting - 8” Center to Center - 3/8” From Bottom Edge to Center • Set Screws To 2-7/8” Round Posts and 2-1/4” Square Posts • 360° Adjustable
For Top-Mounting Signs
Slot Width: 0.320”
Slot Width: 0.195”
Part No: Part No: Fasteners Included:
12A-R278S214X (U) 12A-R278S214F (U) None
12A-R278S214X (ZP) 12A-R278S214F (ZP) Zinc Plated Set Screws
12A-R278S214X ZPV) 12A-R278S214F (ZPV) Zinc Plated Vandal Resistant Set Screws*
12A-R278S214X (ZPVB) 12A-R278S214F (ZPVB) Zinc Plated Vandal Resistant Set Screws and Bolts*
12A-R278S214X (SS) 12A-R278S214F (SS) Stainless Steel Set Screws
12A-R278S214X (SSV) 12A-R278S214F (SSV) Stainless Steel Vandal Resistant Set Screws*
12A-R278S214X (SSVB) 12A-R278S214F (SSVB) Stainless Steel Vandal Resistant Set Screws and Bolts*
12” Sign Holder *HK-532P pin-hole hex key included with every order of brackets with vandal resistant fasteners
12-R238S200X Installation Specifications: 12-R238S200F
• Sign-to-Post Installation • 5/16” Set Screw or Bolt Thru Sign Mounting - 8” Center to Center - 3/8” From Bottom Edge to Center • Set Screws To 2-3/8” Round Posts and 2” Square Posts • 360° Adjustable
For Top-Mounting Signs
Slot Width: 0.320”
Slot Width: 0.195”
Part No: Part No: Fasteners Included:
12-R238S200X (U) 12-R238S200F (U) None
12-R238S200X (ZP) 12-R238S200F (ZP) Zinc Plated Set Screws
12-R238S200X (ZPV) 12-R238S200F (ZPV) Zinc Plated Vandal Resistant Set Screws*
12-R238S200X (ZPVB) 12-R238S200F (ZPVB) Zinc Plated Vandal Resistant Set Screws and Bolts*
12-R238S200X (SS) 12-R238S200F (SS) Stainless Steel Set Screws
12-R238S200X SSV) 12-R238S200F (SSV) Stainless Steel Vandal Resistant Set Screws*
12-R238S200X (SSVB) 12-R238S200F (SSVB) Stainless Steel Vandal Resistant Set Screws and Bolts*
12” Sign Holder *HK-532P pin-hole hex key included with every order of brackets with vandal resistant fasteners
Page 24
www.dynabrackets.com Page 24 info@dynabrackets.com
12-SX134 Installation Specifications: 12-SF134
• Sign-to-Post Installation • 5/16” Set Screw or Bolt Thru Sign Mounting - 8” Center to Center - 3/8” From Bottom Edge to Center • Set Screws To 1-3/4” Square Posts
For Top-Mounting Signs
Slot Width: 0.320”
Slot Width: 0.195”
Part No: Part No: Fasteners Included:
12-SX134 (U) 12-SF134 (U) None
12-SX134 (ZP) 12-SF134 (ZP) Zinc Plated Set Screws
12-SX134 (ZPV) 12-SF134 (ZPV) Zinc Plated Vandal Resistant Set Screws*
12-SX134 (ZPVB) 12-SF134 (ZPVB) Zinc Plated Vandal Resistant Set Screws and Bolts*
12-SX134 (SS) 12-SF134 (SS) Stainless Steel Set Screws
12-SX134 (SSV) 12-SF134 (SSV) Stainless Steel Vandal Resistant Set Screws*
12-SX134 (SSVB) 12-SF134 (SSVB) Stainless Steel Vandal Resistant Set Screws and Bolts*
12” Sign Holder *HK-532P pin-hole hex key included with every order of brackets with vandal resistant fasteners
12-R178S134X Installation Specifications: 12-R178S134X
• Sign-to-Post Installation • 5/16” Set Screw or Bolt Thru Sign Mounting - 8” Center to Center - 3/8” From Bottom Edge to Center • Set Screws To 1-7/8” Round Posts and 1-3/4” Square Posts
For Top-Mounting Signs
Slot Width: 0.320”
Slot Width: 0.195”
Part No: Part No: Fasteners Included:
12-R17S134X (U) 12-R17S134X (U) None
12-R17S134X (ZP) 12-R17S134X (ZP) Zinc Plated Set Screws
12-R17S134X (ZPV) 12-R17S134X (ZPV) Zinc Plated Vandal Resistant Set Screws*
12-R17S134X (ZPVB) 12-R17S134X (ZPVB) Zinc Plated Vandal Resistant Set Screws and Bolts*
12-R17S134X SS) 12-R17S134X (SS) Stainless Steel Set Screws
12-R17S134X (SSV) 12-R17S134X (SSV) Stainless Steel Vandal Resistant Set Screws*
12-R17S134X (SSVB) 12-R17S134X (SSVB) Stainless Steel Vandal Resistant Set Screws and Bolts*
12” Sign Holder *HK-532P pin-hole hex key included with every order of brackets with vandal resistant fasteners
Coming soon!
Page 25
www.dynabrackets.com Page 25 info@dynabrackets.com
12A-U360X-200 Installation Specifications: 12A-U360F-200
• Sign-to-Post Installation • 5/16” Set Screw or Bolt Thru Sign Mounting - 8” Center to Center - 3/8” From Bottom Edge to Center • Bolts To U-Channel (1” Hole Centers) • 360° Adjustable
For Top-Mounting Signs
Slot Width: 0.320”
Slot Width: 0.195”
Part No: Part No: Fasteners Included:
12A-U360X-200 (U) 12A-U360F-200 (U) None
12A-U360X-200 (ZP) 12A-U360F-200 (ZP) Zinc Plated Set Screws and Bolts
12A-U360X-200 (ZPV) 12A-U360F-200 (ZPV) Zinc Plated Vandal Resistant Set Screws and Bolts*
12A-U360X-200 (ZPVB) 12A-U360F-200 (ZPVB) Zinc Plated Vandal Resistant Bolts*
12A-U360X-200 (SS) 12A-U360F-200 (SS) Stainless Steel Set Screws and Bolts
12A-U360X-200 (SSV) 12A-U360F-200 (SSV) Stainless Steel Vandal Resistant Set Screws and Bolts*
12A-U360X-200 (SSVB) 12A-U360F-200 (SSVB) Stainless Steel Vandal Resistant Bolts*
12” Sign Holder *HK-532P pin-hole hex key included with every order of brackets with vandal resistant fasteners
12A-U360X-300 Installation Specifications: 12A-U360F-300
• Sign-to-Post Installation • 5/16” Set Screw or Bolt Thru Sign Mounting - 8” Center to Center - 3/8” From Bottom Edge to Center • Bolts To U-Channel (2” Hole Centers) • 360° Adjustable
For Top-Mounting Signs
Slot Width: 0.320”
Slot Width: 0.195”
Part No: Part No: Fasteners Included:
12A-U360F-200 (U) 12A-U360F-300 (U) None
12A-U360F-200 (ZP) 12A-U360F-300 (ZP) Zinc Plated Set Screws and Bolts
12A-U360F-200 (ZPV) 12A-U360F-300 (ZPV) Zinc Plated Vandal Resistant Set Screws and Bolts*
12A-U360F-200 (ZPVB) 12A-U360F-300 (ZPVB) Zinc Plated Vandal Resistant Bolts*
12A-U360F-200 (SS) 12A-U360F-300 (SS) Stainless Steel Set Screws and Bolts
12A-U360F-200 (SSV) 12A-U360F-300 (SSV) Stainless Steel Vandal Resistant Set Screws and Bolts*
12A-U360F-200 (SSVB) 12A-U360F-300 (SSVB) Stainless Steel Vandal Resistant Bolts*
12” Sign Holder *HK-532P pin-hole hex key included with every order of brackets with vandal resistant fasteners
Page 26
www.dynabrackets.com Page 26 info@dynabrackets.com
6-WPX4 Installation Specifications: 6-WPF4
• Sign-to-Post Installation • 5/16” Set Screw Sign Mounting • Screws To Nominal 4” Wood Posts (Actual Up To 3.58” SQ)
For Top-Mounting Or End-Mounting Signs
Slot Width: 0.305”
Slot Width: 0.175”
Part No: Part No: Fasteners Included:
6-WPX4 (U) 6-WPF4 (U) None
6-WPX4 (ZP) 6-WPF4 (ZP) Zinc Plated Set Screws
6-WPX4 (ZPV) 6-WPF4 (ZPV) Zinc Plated Vandal Resistant Set Screws*
6-WPX4 (SS) 6-WPF4 (SS) Stainless Steel Set Screws
6-WPX4 (SSV) 6-WPF4 (SSV) Stainless Steel Vandal Resistant Set Screws*
3-1/2” Sign Holder *HK-532P pin-hole hex key included with every order of brackets with vandal resistant fasteners
Page 27
www.dynabrackets.com Page 27 info@dynabrackets.com
Windless® Overhead Sign Mounts These extremely strong and durable overhead sign brackets are constructed from high tensile aluminum alloy and assembled with stainless steel fasteners for complete corrosion resistance. We’ve also equipped the bracket with specialized oil-impregnated brass Oilite® bushings to self-lubricate the swinging components for a low-maintenance overhead sign system. In comparison to other cast aluminum overhead brackets which have a higher likelihood to crack or fracture under high stress windloads, Dyna Engineering’s Windless® Overhead Sign Mount brackets are designed to withstand extreme winds in all weather conditions.
®
7-OM-A-2.5 7-OM-A-4
7-OM-F-2.5 7-OM-F-4
7-ADAPTER-5-1 (U)
Add-on available for sign box mounting!
7-OM-A-2.5 7-OM-A-4 7-OM-F-2.5 7-OM-F-4 Installation Specifications:
• Sign-to-Post Installation • 5/16” Bolt Thru Sign Mounting - 1-1/2” Center to Center • Straps To Any Overhead Mast Arms
For Overhead Mounting Signs Equipped With Windless® Dampening System
Strap To Post Fits Up To 3/4” Wide Band 2-1/2” Saddle Size Adjustable Length
Strap To Post Fits Up To 3/4” Wide Band 4” Saddle Size Adjustable Length
Strap To Post Fits Up To 3/4” Wide Band 2-1/2” Saddle Size Fixed Length
Strap To Post Fits Up To 3/4” Wide Band 4” Saddle Size Fixed Length
Part No: Part No: Part No: Part No: Fasteners Included:
7-OM-A-2.5 (U) 7-OM-A-4 (U) 7-OM-F-2.5 (U) 7-OM-F-4 (U) No Sign Fasteners But Includes Pre-Assembly (shown below)
7-OM-A-2.5 (SS) 7-OM-A-4 (SS) 7-OM-F-2.5 (SS) 7-OM-F-4 (SS) Stainless Steel Sign Fasteners And Includes Pre-Assembly
Easily convert to free-swing style by removing springs Easily adjustable for leveling signs to streets Complete corrosion resistant assembly Pre-assembled as shown for convenience Windless® design to release stress on posts and signs during high windloads Additional 7-ADAPTER-5-1 (U) available for backlit / sign box mounting
Page 28
www.dynabrackets.com Page 28 info@dynabrackets.com
All-Sign End Mounts This convenient line of end mounts use a bolt thru style sign mounting without a sign slot. This way it is compatible with both standard flat and extruded signs as well as any thickness of other signs. With the bolt-to-post hole centers lining up with 1” hole centers, these brackets can be mounted directly to standard 1” hole center telespar square posts without any labour-intensive drilling into sign posts which eliminates damage to city property. Similar to our other end mounts, these brackets can also be mounted to a post with stainless steel strapping.
LB-007 Installation Specifications:
For End-Mounting Signs • Sign-to-Post Installation • 5/16” Bolt Thru Sign Mounting • Bolts/Straps To 2-3/8”+ Round, 1-1/4”+ Square, All Lamp Posts
Part No:
Fasteners Included:
LB-007 (U) None
LB-007 (SS) Stainless Steel Nuts, Bolts and Washers
Requires 2 brackets to mount 1 sign Vandal resistant nuts and bolts are available to reduce theft and vandalism
SS-50 Installation Specifications:
For End-Mounting Signs • Sign-to-Post Installation • 3/8” Bolt Thru Sign Mounting - 4-3/4” Center to Center - 3/4” From Edge To Center • Straps To 2-7/8”+ Round, 2”+ Square, All Lamp Posts
Overall Length: 6”
Part No: Fasteners Included:
SS-50 (U) None
SS-50 (ZP) Zinc Plated Nuts and Bolts
SS-50 (SS) Stainless Steel Nuts and Bolts
Requires 2 halves to mount 1 sign Vandal resistant nuts and bolts are available to reduce theft and vandalism
SS-3CC5 SS-3CC5.25 SS-10CC7 SS-10CC8 Installation Specifications:
• Sign-to-Post Installation • 3/8” Bolt Thru Sign Mounting - Sign Hole Centers Shown In Left-Side Table - 3/8” From Edge To Center (If Bolting To Post) - 1/2” From Edge To Center (If Strapping To Post) • Bolts/Straps To 2-3/8”+ Round, 1-1/2”+ Square, All Lamp Posts
For End-Mounting Signs
Sign Hole Centers: 5”
Sign Hole Centers: 5-1/4”
Sign Hole Centers: 7”
Sign Hole Centers: 8”
Part No: Part No: Part No: Part No: Fasteners Included:
SS-3CC5 (U) SS-3CC5.25 (U) SS-10CC7 (U) SS-10CC8 (U) None
SS-3CC5 (ZP) SS-3CC5.25 (ZP) SS-10CC7 (ZP) SS-10CC8 (ZP) Zinc Plated Nuts and Bolts
SS-3CC5 (SS) SS-3CC5.25 (SS) SS-10CC7 (SS) SS-10CC8 (SS) Stainless Steel Nuts and Bolts
Can bolt directly to telespar posts without any extra drilling Vandal resistant nuts and bolts are available to reduce theft and vandalism
Page 29
www.dynabrackets.com Page 29 info@dynabrackets.com
SS-406 SS-409 Installation Specifications:
For End-Mounting Signs • Sign-to-Post Installation • 3/8” Bolt Thru Sign Mounting - Sign Hole Centers Shown In Left-Side Table - 1/2” From Edge To Center • Straps To 2-3/8”+ Round, 2”+ Square, All Lamp Posts
Slot Width: 0.330” Sign Hole Centers: 5” Overall Length: 6”
Slot Width: 0.330” Sign Hole Centers: 8” Overall Length: 9”
Part No: Part No: Fasteners Included:
SS-406 (U) SS-409 (U) None
SS-406 (ZP) SS-409 (ZP) Zinc Plated Nuts and Bolts
SS-406 (SS) SS-409 (SS) Stainless Steel Nuts and Bolts
Vandal resistant nuts and bolts are available to reduce theft and vandalism
SS-104 SS-106 SS-107 SS-109 Installation Specifications:
• Sign-to-Post Installation • 5/16” Bolt Thru Sign Mounting - Sign Hole Centers Shown In Left-Side Table - 3/8” From Edge To Center • Straps To 2-3/8”+ Round, 2-1/2”+ Square, All Lamp Posts
For End-Mounting Signs
Slot Width: 0.185” Sign Hole Centers: 3” Overall Length: 4”
Slot Width: 0.185” Sign Hole Centers: 5” Overall Length: 6”
Slot Width: 0.185” Sign Hole Centers: 6” Overall Length: 7”
Slot Width: 0.185” Sign Hole Centers: 8” Overall Length: 9”
Part No: Part No: Part No: Part No: Fasteners Included:
SS-104 (U) SS-106 (U) SS-107 (U) SS-109 (U) None
SS-104 (ZP) SS-106 (ZP) SS-107 (ZP) SS-109 (ZP) Zinc Plated Nuts and Bolts
SS-104 (SS) SS-106 (SS) SS-107 (SS) SS-109 (SS) Stainless Steel Nuts and Bolts
SS-104 can also be used to end mount 6” tall extruded street name signs SS-107 can also be used to end mount 9” tall extruded street name signs Vandal resistant nuts and bolts are available to reduce theft and vandalism
Page 30
www.dynabrackets.com Page 30 info@dynabrackets.com
SS-209 Installation Specifications:
For End-Mounting Signs • Sign-to-Post Installation • 3/8” Bolt Thru Sign Mounting - 8” Center to Center - 1/2” From Edge To Center • Straps To 4”+ Round, 3-1/4”+ Square, All Lamp Posts
Slot Width: 0.330” Overall Length: 9”
Part No: Fasteners Included:
SS-209 (U) None
SS-209 (ZP) Zinc Plated Nuts and Bolts
SS-209 (SS) Stainless Steel Nuts and Bolts
Vandal resistant nuts and bolts are available to reduce theft and vandalism
SS-312 Installation Specifications:
For End-Mounting Signs • Sign-to-Post Installation • 5/16” Bolt Thru Sign Mounting - 8” Center to Center - 3/8” From Edge To Center • Straps To 1-3/4”+ Square, All Lamp Posts
Slot Width: 0.185” Overall Length: 12”
Part No: Fasteners Included:
SS-312 (U) None
SS-312 (ZP) Zinc Plated Nuts and Bolts
SS-312 (SS) Stainless Steel Nuts and Bolts
Vandal resistant nuts and bolts are available to reduce theft and vandalism
Page 31
www.dynabrackets.com Page 31 info@dynabrackets.com
Windless® End Mounts Manufactured with the same Windless® design as Dyna Engineering’s Windless® Overhead Sign Mounts, these end mounts share the same characteristics - extremely strong, durable, and completely corrosion resistant. These end mounts are also equipped with specialized oil-impregnated brass Oilite® bushings to self-lubricate the swinging components to provide a low-maintenance solution.
7-SM-F-B 7-SM-F-S
®
7-SM-F-B 7-SM-F-S Installation Specifications:
• Sign-to-Post Installation • 5/16” Bolt Thru Sign Mounting - 1-1/2” Center to Center - 1” From Top Edge to Center
For End-Mounting Signs
Bolt To Post 6” Saddle Size Fixed Length
Strap To Post Fits Up To 3/4” Wide Band 4” Saddle Size Fixed Length
Part No: Part No: Fasteners Included:
7-SM-F-B (U) 7-SM-F-S (U) No Sign Fasteners But Includes Pre-Assembly
7-SM-F-B (SS) 7-OM-F-S (SS) Stainless Steel Sign Fasteners And Includes Pre-Assembly
7-SM-F-B Backing design ideal for post mount to 1-3/4”+ square, all lamp posts, and any flat surfaces Can bolt directly to telespar posts without any extra drilling 7-SM-F-S Backing design ideal for post mount to 2-3/8”+ round, 2-1/2”+ square, and all lamp posts Complete corrosion resistant assembly Pre-assembled as shown for convenience Windless® design to release stress on posts and signs during high windloads Windless® design also prevents signs from bending or causing damage to moving vehicles and objects passing by
Page 32
www.dynabrackets.com Page 32 info@dynabrackets.com
15-CB1450 Installation Specifications:
For End-Mounting Signs • Sign-to-Post Installation • 5/16” Set Screw or Bolt Thru Sign Mounting - sign hole locations shown in specification sheet • Bolts/Straps To 2-3/8”+ Round, 2”+ Square, All Lamp Posts
Part No: Fasteners Included:
15-CB1450 (U) None
15-CB1450 (ZP) Zinc Plated Set Screws
15-CB1450 (ZPV) Zinc Plated Vandal Resistant Set Screws*
15-CB1450 (ZPVB) Zinc Plated Vandal Resistant Bolts*
15-CB1450 (SS) Stainless Steel Set Screws
15-CB1450 (SSV) Stainless Steel Vandal Resistant Set Screws*
15-CB1450 (SSVB) Stainless Steel Vandal Resistant Bolts*
Can bolt directly to telespar posts without any extra drilling *HK-532P pin-hole hex key included with every order of brackets with vandal resistant fasteners
15-CB2400 Installation Specifications:
For End-Mounting Signs • Sign-to-Post Installation • 5/16” Set Screw or Bolt Thru Sign Mounting - sign hole locations shown in specification sheet • Bolts/Straps To 2-3/8”+ Round, 2”+ Square, All Lamp Posts
Part No: Fasteners Included:
15-CB2400 (U) None
15-CB2400 (ZP) Zinc Plated Set Screws
15-CB2400 (ZPV) Zinc Plated Vandal Resistant Set Screws*
15-CB2400 (ZPVB) Zinc Plated Vandal Resistant Bolts*
15-CB2400 (SS) Stainless Steel Set Screws
15-CB2400 (SSV) Stainless Steel Vandal Resistant Set Screws*
15-CB2400 (SSVB) Stainless Steel Vandal Resistant Bolts*
Can bolt directly to telespar posts without any extra drilling *HK-532P pin-hole hex key included with every order of brackets with vandal resistant fasteners
16-CB2318 Installation Specifications:
For Offset Post Sign Mounting • Bracket-to-Post Installation • 2-3/8” Round Sign Bracket Set Screws To Mounting Base • Straps To 4-1/2”+ Round, 4-3/4”+ Square, All Lamp Posts
Part No: Fasteners Included:
15-CB2318 None
AR-238R-278R adapter ring is available to convert from 2-3/8” mounting base to 2-7/8”
Page 33
www.dynabrackets.com Page 33 info@dynabrackets.com
POST CLIP-DC Installation Specifications:
For Extruded Highway Signs • Sign-to-Post Installation • Clamp Sign Mounting • Clamps To Highway Sign Supports
Part No: Fasteners Included:
POST CLIP-DC (U) None
POST CLIP-DC (SS) Stainless Steel Lock Nuts, T-Bolts, and Washers
Strength tested to meet and exceed AASHTO wind specifications
SC-180AL6 Installation Specifications:
For Side / Vertical Sign Stacking • Sign-to-Sign Installation • 3/8” Bolt Thru Sign Mounting - 3” Center to Center Sign Angle 180°
Part No: Fasteners Included:
SC-180AL6 (U) None
SC-180AL6 (ZP) Zinc Plated Nuts and Bolts
SC-180AL6 (SS) Stainless Steel Nuts and Bolts
Conveniently used to stack signs horizontally or vertically parallel
SC-180AL2.25 Installation Specifications:
For Side / Vertical Sign Stacking • Sign-to-Sign Installation • 3/8” Bolt Thru Sign Mounting - 1-1/4” Center to Center Sign Angle 180°
Part No: Fasteners Included:
SC-180AL6 (U) None
SC-180AL6 (ZP) Zinc Plated Nuts and Bolts
SC-180AL6 (SS) Stainless Steel Nuts and Bolts
Conveniently used to stack signs horizontally or vertically parallel
FN-270NL Installation Specifications:
For Mounting Flat On Fence • Sign-to-Chain Link Fence Installation • 5/16” Bolt Thru Sign Mounting
Sign Angle 180°
Part No: Fasteners Included:
FN-270NL (U) None
FN-270NL (ZP) Zinc Plated Bolts
Conveniently used to mount signs on chain link fence
Page 34
www.dynabrackets.com Page 34 info@dynabrackets.com
Examples of Various Sign Mounting Options
14-RF278 Installation Specifications:
For Top-Mounting Signs • Bracket-to-Post Installation • For Use With 14-SEPBRKT-F And 14-SEPBRKT-A • Set Screws To 2-7/8” Round Posts
Part No: Fasteners Included:
14-RF278 (U) None
14-RF278 (ZP) Zinc Plated Set Screws
14-RF278 (ZPV) Zinc Plated Vandal Resistant Set Screws
14-RF278 (SS) Stainless Steel Set Screws
14-RF278 (SSV) Stainless Steel Vandal Resistant Set Screws
Twin sign panel mounting system *HK-532P pin-hole hex key included with every order of brackets with vandal resistant fasteners
14-SEPBRKT-F Installation Specifications:
For Top-Mounting Signs • Sign-to-Bracket Installation • Clamp Sign Mounting • Clamps To 14-RF278
Slot Width 0.180”
Part No: Fasteners Included:
14-SEPBRKT-F None
Twin sign panel mounting system Requires 2pcs 14-SEPBRKT-F to mount 1 sign
14-SEPBRKT-A Installation Specifications:
For Stacking Signs At 90° / 180° • Sign-to-Sign Installation • Clamp Sign Mounting • For Use With 14-RF278 And 14-SEPBRKT-F
Slot Width 0.180”
Part No: Fasteners Included:
14-SEPBRKT-A None
Twin sign panel mounting system Requires 2pcs 14-SEPBRKT-A to stack each additional sign
Page 35
www.dynabrackets.com Page 35 info@dynabrackets.com
ISOTM Strapping Type 201 stainless steel
Part No: Width Gauge Coil Length Color
BA204 1/2” 0.030” 100’ -
BA205 5/8” 0.030” 100’ -
BA206 3/4” 0.030” 100’ -
BA206-BLK 3/4” 0.030” 100’ Black
LG181 1/2” 0.020” 100’ -
LG171 5/8” 0.020” 100’ -
LG161 3/4” 0.020” 100’ -
To be used with ISOTM buckles
ISOTM Buckles Type 200/300 stainless steel
Part No: Width
BU254 1/2”
BU255 5/8”
BU256 3/4”
To be used with ISOTM strapping
Band-ItTM Strapping Type 201 stainless steel
Part No: Width Gauge Coil Length
C204 1/2” 0.030” 100’
C205 5/8” 0.030” 100’
C206 3/4” 0.030” 100’
To be used with Band-ItTM buckles
Band-ItTM Buckles Type 200/300 stainless steel
Part No: Width
C254 1/2”
C255 5/8”
C256 3/4”
To be used with Band-ItTM strapping
ISOTM Wing Seals Type 200/300 stainless steel
Part No: Width
WS154 1/2”
WS155 5/8”
WS156 3/4”
To be used with ISOTM strapping
BA206-BLK Now in stock!
Page 36
www.dynabrackets.com Page 36 info@dynabrackets.com
Bucklestraps—Custom Lengths Type 201 stainless steel
Part No: Width Gauge Finished Length
BS204-BU-##* 1/2” 0.030” Any
BS205-BU-##* 5/8” 0.030” Any
BS206-BU-##* 3/4” 0.030” Any
BS181-BU-##* 1/2” 0.020” Any
BS171-BU-##* 5/8” 0.020” Any
BS181-BU-##* 3/4” 0.020” Any
Set-up fee and 300’ total finished minimum length will apply *## denotes the finished length in inches - specified by customer
Bucklestraps Band-ItTM Strapping - Type 201 stainless steel
Part No: Width Gauge Finished Length
C204-BU-##* 1/2” 0.030” Any
C205-BU-##* 5/8” 0.030” Any
C206-BU-##* 3/4” 0.030” Any
Set-up fee and 300’ total finished minimum length will apply *## denotes the finished length in inches - specified by customer
Bucklestraps—Standard Lengths Type 201 stainless steel
Part No: Width Gauge Finished Length
BS204-BU-34 1/2” 0.030” 34”
BS205-BU-34 5/8” 0.030” 34”
BS205-BU-46 5/8” 0.030” 46”
BS206-BU-44 3/4” 0.030” 44”
In stock No set-up fee and only standard minimum order amounts will apply
Pre-Fabricated Bucklestraps Our machine shop is capable of manufacturing pre-fabricated strapping hardware using standard stainless steel strapping cut to length with a tapered end on one side and a permanently attached buckle on the other. This allows for quick and easy installation, saving approximately 3 minutes per sign, and reduces the number of tools brought to a job site. We have added a feature to our cutting tools which taper the ends of the strapping in order to protect the installer from any sharp or jagged edges caused by cutting the strapping with basic shears. The tapering also allows for easier entry into the bracket and the buckle when fastening.
Page 37
www.dynabrackets.com Page 37 info@dynabrackets.com
Spin Handle Tensioning Tools
Part No: Brand Minimum
Width Maximum
Width Maximum
Gauge Tensioning
Force
T-001 Standard 3/16” 3/4” 0.030” 2400 LBS
C-001 Band-ItTM 3/16” 3/4” 0.030” 2400 LBS
Strap Tensioning Tool
Ratchet Handle Tensioning Tools
Part No: Brand Minimum
Width Maximum
Width Maximum
Gauge
T-101 Standard 3/8” 3/4” 0.030”
Strap Tensioning Tool Recommended For Tensioning On Flat Surfaces
Page 38
www.dynabrackets.com Page 38 info@dynabrackets.com
BC2 Series Breakaways Installation Specifications:
Universal Breakaway System • Anchor-to-Post Installation • 5/16” Set Screw Mount To Anchor • 5/16” Set Screw Mount To Post Available In All Common Post Sizes
Part No: Post Type 1 Post Type 2
BC2-178R-178R 1-7/8” Round 1-7/8” Round
BC2-178R-238R 1-7/8” Round 2-3/8” Round
BC2-178R-134SQ 1-7/8” Round 1-3/4” Square
BC2-178R-200SQ 1-7/8” Round 2” Square
BC2-178R-214SQ 1-7/8” Round 2-1/4” Square
BC2-238R-238R 2-3/8” Round 2-3/8” Round
BC2-238R-134SQ 2-3/8” Round 1-3/4” Square
BC2-238R-200SQ 2-3/8” Round 2” Square
BC2-238R-214SQ 2-3/8” Round 2-1/4” Square
BC2-134SQ-134SQ 1-3/4” Square 1-3/4” Square
BC2-134SQ-200SQ 1-3/4” Square 2” Square
BC2-134SQ-214SQ 1-3/4” Square 2-1/4” Square
BC2-200SQ-200SQ 2” Square 2” Square
BC2-200SQ-214SQ 2” Square 2-1/4” Square
BC2-214SQ-214SQ 2-1/4” Square 2-1/4” Square
Pre-assembled as shown for convenience Sign post breakaway system protects the post anchor in the ground from damage BC2 Cups Only Installation Specifications:
Replacements - Cups Only Extends cup reusability when fasteners are replaced with each use
Part No: Post Type
BC2-178R (U) 1-7/8” Round
BC2-238R (U) 2-3/8” Round
BC2-134SQ (U) 1-3/4” Square
BC2-200SQ (U) 2” Square
BC2-214SQ (U) 2-1/4” Square
BC2-HW-KIT hardware kit is available for re-assembling couplers
BC2 Centerpiece Only Installation Specifications:
Replacements - Centerpiece Only Best results when the contact surfaces between the centerpiece and cups are free of debris
Part No: Post Type
BC2-CENTER-7 Works With All Combinations
More cost-effective replacement option than traditional 1-piece designs
BC2 Fasteners Only Installation Specifications:
Replacements - Fasteners Only This convenient fastener kit includes enough hardware to completely re-assemble 1 breakaway coupling
Part No: Fasteners Included:
BC2-HW-KIT Stainless Steel Nuts, Bolts, Set Screws, Washers & Galv. Cable
Stainless steel and galvanized hardware extends re-usability of the cups
Square to Square Round to Round Round to Square
Round and Square Cups
Centerpiece - Easily Replaceable Break Portion
Fastener Kit - Complete For 1 Breakaway Coupling
A truly universal design that can easily couple any combination of sign posts together so there is no need to search for odd size combinations anymore! This easy-to-use 3-piece design allows you to mix-and-match any sign post types, in essence, you create your own “build-to-fit” coupler for whatever you need. Another benefit of this 3-piece design is that you only have to replace components as necessary. The cups can be reused and replaced as needed and the centerpiece is just a fraction of the replacement cost of traditional 1-piece designs.
Useful Tip: Keep some pre-assembled sets on hand when heading out to repair fallen sign posts. There’s no need to re-assemble on-site. Bring all of the used components back to your workshop to salvage, repair and re-assemble reusable parts in a more comfortable environment. Some threaded holes may need re-threading. Enjoy the savings!
Page 39
www.dynabrackets.com Page 39 info@dynabrackets.com
BC1-238R-238R Installation Specifications:
2-3/8” Breakaway Coupling • Anchor-to-Post Installation • 5/16” Set Screw Mount To Anchor • 5/16” Set Screw Mount To Post
Part No: Post Type 1 Post Type 2
BC1-238R-238R 2-3/8” Round 2-3/8” Round
Sign post breakaway system protects the post anchor in the ground from damage
D-238 Installation Specifications:
2-3/8” Aluminum Dome Rain Cap • Press Fit Installation • Fits On Outside Of Post
Part No: Post Type 1
D-238 2-3/8” Round
Prevent water build up and corrosion inside posts Adds decorative dome-top appearance
P-238-O Installation Specifications:
2-3/8” Plastic Flat-Top Rain Cap • Press Fit Installation • Fits On Outside Of Post
Part No: Post Type 1
P-238-O 2-3/8” Round
Prevent water build up and corrosion inside posts Adds decorative low profile appearance UV stabilizers added into plastic to extend life
P-238-I Installation Specifications:
2-3/8” Plastic Plug Rain Cap • Press Fit Installation • Fits On Inside Of Post
Part No: Post Type 1
P-238-I 2-3/8” Round
Prevent water build up and corrosion inside posts Won’t be seen when viewed from the ground UV stabilizers added into plastic to extend life
P-200 Installation Specifications:
2” Aluminum Pyramid Rain Cap • Press Fit Installation • Fits On Outside Of Post
Part No: Post Type 1
P-200 2” Sqaure
Prevent water build up and corrosion inside posts Adds decorative pyramid-top appearance
Page 40
www.dynabrackets.com Page 40 info@dynabrackets.com
DR-38AL1 Installation Specifications: DR-38ZP1
Aluminum Drive Rivet • Sign-to-Post or Post-to-Anchor Installation • Body Diameter: 3/8” • Head Diameter: 1” • Grip Range: 0.233” to 0.330”
Zinc Plated Steel Drive Rivet
Aluminum Body and Pin Steel Body and Pin
Part No: Fasteners Included: Part No:
DR-38AL1 (U) None DR-38ZP1 (U)
DR-38ZP1 (NL) DR-38AL1 (NL) Nylon Washers (standard 0.062” thick)
Jumbo head 1” diameter provides substantially greater surface area clamping support Head installs flush with sign face to increase vandal resistance Easy installation with a typical hammer When using drive rivets to install signs to posts: Drive rivets can be used to clamp just about any type of sign to a post including aluminum, plastic, or wood signs. Use nylon washers to protect the reflective sheeting on the signs Minimum sign thickness combinations with sign post and washer: 0.066” minimum sign thickness when combined with 12GA post and 0.062” thick washer* 0.088” minimum sign thickness when combined with 14GA post and 0.062” thick washer* *An additional nylon washer can be added to mount thinner signs Maximum sign thickness combinations with sign post and washer: 0.163” maximum sign thickness when combined with 12GA post and 0.062” thick washer** 0.185” maximum sign thickness when combined with 14GA post and 0.062” thick washer** **Nylon washer can be excluded to mount thicker signs When using drive rivets to install sign posts to anchors: Can mount either one 12GA or 14GA sign post to one or two layers of 12GA or 14GA anchors Use steel washers to adjust the clamping tension Standard telespar post / anchor thicknesses: 12 GA = 0.105” 14 GA = 0.083”
AR-238R-278R Installation Specifications:
2-3/8” to 2-7/8” Round Adapter • Bracket-to-Post Installation • 2-3/8” Inside Diameter x 2-7/8” Outside Diameter • Set Screw Mount To Post • Sign Bracket Can Set Screw Mount To Adapter
Part No: Fasteners Included:
AR-238R-278R (U) None
AR-238R-278R (ST) Oilized Carbon Steel Set Screws
Adapts any 2-3/8” OD round post or mounting base to transform to 2-7/8” OD
A-238R Installation Specifications:
2-3/8” Round Adapter • Bracket-to-Post Installation • 2-3/8” Outside Diameter Mounting Base • Bolt Thru Mount To Post • Sign Bracket Can Set Screw Mount To Adapter
Part No: Fasteners Included:
A-238R None
Adapts any square or U-channel post to transform to 2-3/8” OD
Page 41
www.dynabrackets.com Page 41 info@dynabrackets.com
CRB CMB Installation Specifications:
For Erecting Signs on Concrete Barriers • Concrete Barrier-to-Post Installation • CRB for 210mm and CMB for 240mm Concrete Barriers • 2-3/8” Inside Diameter
Part No: Part No: Fasteners Included:
CRB (GA) CMB (GA) Galvanized Threaded Rod, Washers, Nuts and SS Hex Bolt
SP-238R63 sign post, D-238 rain cap, and HS-1 sign brackets are available for a complete assembly.
CRB CMB SP-238R63 Installation Specifications:
Sign Post for Concrete Barrier • Barrier-to-Bracket Installation • 2-3/8” Outside Diameter
Part No: Length:
SP-238R63 63” (5ft 3in)
Designed for use with CRB and CMB
SPB-238GA10 Installation Specifications:
Surface Mount Sign Post Base • Ground-to-Post Installation • 2-3/8” Inside Diameter • 8”x8” Base With 6” Hole Centers 10” Height
Part No: Fasteners Included:
SPB-278GA10 (SS) Stainless Steel Set Screw
Stainless steel hex bolts are available upon request
SPB-238GA12 Installation Specifications:
Surface Mount Sign Post Base • Ground-to-Post Installation • 2-3/8” Inside Diameter • 6”x6” Base With 3.5” Hole Centers 12” Height
Part No: Fasteners Included:
SPB-278GA12 (SS) Stainless Steel Set Screw
Stainless steel hex bolts are available upon request
63” (5’3”) length designed for use with CRB and CMB
SPA-238GA12 SPA-238GA18 Installation Specifications:
Concrete-Embedded Sign Post Anchor • Ground-to-Post Installation • 2-3/8” Inside Diameter 12” Length 18” Length
Part No: Part No: Fasteners Included:
SPA-278GA12 (SS) SPA-278GA18 (SS) Stainless Steel Set Screw
Stainless steel hex bolts are available upon request
Page 42
www.dynabrackets.com Page 42 info@dynabrackets.com
S-38AL1.125 Installation Specifications:
Solid Aluminum Sign Spacer • Sign-to-Post Installation • 5/16” or 3/8” Bolt Thru Sign and Post Mounting • 1.125” length
Part No: Fasteners Included:
S-38AL1.125 (U) None
S-38AL1.125 (ZP) Zinc Plated Nuts, Bolts, and Washers (3/8” Included)
S-38AL1.125 (SS) Stainless Steel Nuts, Bolts, and Washers (3/8” Included)
Adds support for signs on U-channel posts Shape fits into all types of U-channel posts (check U-channel depth and use appropriate length) 5/16” fasteners available
S-38GA1.125 Installation Specifications:
Galvanized Steel Sign Spacer • Sign-to-Post Installation • 5/16” or 3/8” Bolt Thru Sign and Post Mounting • 1.125” length
Part No: Fasteners Included:
S-38GA1.125 (U) None
S-38GA1.125 (ZP) Zinc Plated Nuts, Bolts, and Washers (3/8” Included)
S-38GA1.125 (SS) Stainless Steel Nuts, Bolts, and Washers (3/8” Included)
Adds support for signs on U-channel posts Shape fits into all types of U-channel posts (check U-channel depth and use appropriate length) 5/16” fasteners available
S-38NL1.275 Installation Specifications:
Nylon Sign Spacer • Sign-to-Post Installation • 5/16” or 3/8” Bolt Thru Sign and Post Mounting • 1.275” length
Part No: Fasteners Included:
S-38NL1.275 (U) None
S-38NL1.275 (ZP) Zinc Plated Nuts, Bolts, and Washers (3/8” Included)
S-38NL1.275 (SS) Stainless Steel Nuts, Bolts, and Washers (3/8” Included)
Nylon with UV stabilizers Adds support for signs on U-channel posts Shape fits into all types of U-channel posts (check U-channel depth and use appropriate length) Spacer will compress as the bolts are tightened 5/16” fasteners available
S-38AL1.350 Installation Specifications:
Solid Aluminum Sign Spacer • Sign-to-Post Installation • 5/16” or 3/8” Bolt Thru Sign and Post Mounting • 1.350” length
Part No: Fasteners Included:
S-38AL1.350 (U) None
S-38AL1.350 (ZP) Zinc Plated Nuts, Bolts, and Washers (3/8” Included)
S-38AL1.350 (SS) Stainless Steel Nuts, Bolts, and Washers (3/8” Included)
Adds support for signs on U-channel posts Shape fits into all types of U-channel posts (check U-channel depth and use appropriate length) 5/16” fasteners available
Page 43
www.dynabrackets.com Page 43 info@dynabrackets.com
Square Tapered Nuts With Vandal Resistant Design
Cadmium Plated
Part No: Thread
Diameter Width
Flat to Flat
VN-516CP1 5/16” 1”
VN-38CP0.75 3/8” 3/4”
VN-38CP1 3/8” 1”
Only requires typical wrench for installation
Breakaway Nuts With Vandal Resistant Design
Aluminum
Part No: Thread
Diameter
VN-516ALBK 5/16”
VN-38ALBK 3/8”
Only requires typical wrench for installation
Tri-Groove Nuts With Vandal Resistant Design
Die Cast Zinc
Part No: Thread
Diameter
TN-516ZN 5/16”
TN-38ZN 3/8”
TN-38/516 TOOL available for installation
Hex Locknuts With Nylon Insert
Stainless Steel Zinc Plated
Part No: Thread
Diameter Part No:
HN-516SSLK 5/16” HN-516ZPLK
HN-38SSLK 3/8” HN-38ZPLK
Only requires typical wrench for installation
Serrated Hex Flange Nuts
Zinc Plated
Part No: Thread
Diameter
HN-516ZPSERR 5/16”
Only requires typical wrench for installation
Dome Hex Nuts
Zinc Plated
Part No: Thread
Diameter
DN-12ZP 1/2”
Only requires typical wrench for installation
Hex Nuts
Stainless Steel Zinc Plated
Part No: Thread
Diameter Part No:
HN-516SS 5/16” HN-516ZP
HN-38SS 3/8” HN-38ZP
Only requires typical wrench for installation
Page 44
www.dynabrackets.com Page 44 info@dynabrackets.com
Round Head Bolts With Vandal Resistant Design
Zinc Plated
Part No: Thread
Diameter Bolt
Length
VB-12ZP3.25 1/2” 3-1/4”
VB-12ZP3.75 1/2” 3-3/4”
VB-12 SOCKET available for installation
Socket Button Head Bolts With Vandal Resistant Design
Stainless Steel Zinc Plated
Part No: Thread
Diameter Part No:
Socket Size
Bolt Length
- VB-516SS0.625 5/16” 5/8” 3/16”
VB-516SS0.75 5/16” VB-516ZP0.75 5/32” 3/4”
VB-38SS1 3/8” - 7/32” 1”
HK-series hex keys available for installation
Rectangular Head T-Bolts
Stainless Steel
Part No: Thread
Diameter Bolt
Length
TB-38SS1.75 3/8” 1-3/4”
Commonly used with post clips for extruded highway signs
Corner Bolts
Zinc Plated
Part No: Thread
Diameter Telespar Post Size
CB-516ZP2 5/16” Up to 2”
CB-516ZP2.5 5/16” Up to 2-1/2”
CB-516ZP3 5/16” Up to 3”
HN-516SERR available for assembly
Hex Head Bolts
Zinc Plated Stainless Steel
Part No: Part No: Thread
Diameter Bolt
Length
HB-516ZP0.5 HB-516SS0.5 5/16” 1/2”
HB-516ZP0.625 HB-516SS0.625 5/16” 5/8”
HB-516ZP0.75 HB-516SS0.75 5/16” 3/4”
HB-516ZP1 HB-516SS1 5/16” 1”
HB-516ZP1.25 HB-516SS1.25 5/16” 1-1/4”
HB-516ZP1.5 HB-516SS1.5 5/16” 1-1/2”
HB-516ZP2 HB-516SS2 5/16” 2”
HB-516ZP2.5 HB-516SS2.5 5/16” 2-1/2”
HB-516ZP3 HB-516SS3 5/16” 3”
HB-38ZP1 HB-38SS1 3/8” 1”
HB-38ZP1.25 HB-38SS1.25 3/8” 1-1/4”
HB-38ZP1.5 HB-38SS1.5 3/8” 1-1/2”
HB-38ZP2 HB-38SS2 3/8” 2”
HB-38ZP2.5 HB-38SS2.5 3/8” 2-1/2”
HB-38ZP3 HB-38SS3 3/8” 3”
HB-38ZP3.5 HB-38SS3.5 3/8” 3-1/2”
HB-38ZP4 HB-38SS4 3/8” 4”
HB-38ZP4.5 HB-38SS4.5 3/8” 4-1/2”
HB-38ZP5 HB-38SS5 3/8” 5”
HB-38ZP5.5 HB-38SS5.5 3/8” 5-1/2”
HB-38ZP6 HB-38SS6 3/8” 6”
Only requires typical wrench for installation
Page 45
www.dynabrackets.com Page 45 info@dynabrackets.com
Socket Set Screws With Vandal Resistant Design
Cadmium Plated Zinc Plated Stainless Steel
Part No: Thread
Diameter Part No:
Socket Size
Screw Length
Part No:
- SS-516CP0.312P 5/16” 5/16” 5/32” -
- 5/16” SS-516ZPK0.375P 5/32” 3/8” SS-516SSK0.375P
- 5/16” SS-516ZPK0.5P 5/32” 1/2” SS-516SSK0.5P
HK-532P available for installation
Socket Set Screws
Zinc Plated Stainless Steel
Part No: Part No: Thread
Diameter Screw Length
Socket Size
SS-516ZPK0.375 SS-516SSK0.375 5/16” 3/8” 5/32”
SS-516ZPK0.5 SS-516SSK0.5 5/16” 5/16” 5/32”
SS-516ZPK0.75 SS-516SSK0.75 5/16” 3/4” 5/32”
HK-532P available for installation
Split-Lock Washers
Zinc Plated Stainless Steel
Part No: Part No: Inside
Diameter
WA-516ZPLK WA-516SSLK 5/16”
WA-38ZPLK WA-38SSLK 3/8”
Helps prevent fasteners from loosening
Flat Washers
Zinc Plated Stainless Steel Nylon
Part No: Part No: Part No: Inside
Diameter Outside Diameter
WA-516ZP0.75 WA-516SS0.75 WA-516NL0.75 5/16” 3/4”
WA-516ZP0.875 WA-516SS0.875 - 5/16” 7/8”
- - WA-516NL1 5/16” 1”
- - WA-516NL1.5 5/16” 1-1/2”
WA-38ZP0.75 WA-38SS0.75 - 3/8” 3/4”
WA-38ZP0.875 WA-38SS0.875 - 3/8” 7/8”
WA-38ZP1 WA-38SS1 WA-38NL1 3/8” 1”
- WA-38SS1.5 WA-38NL1.5 3/8” 1-1/2”
Helps prevent bolts from damaging surfaces when tightening
Page 46
www.dynabrackets.com Page 46 info@dynabrackets.com
Hex Keys
Oilized Carbon Steel
Part No: For
Socket Size
HK-532P 5/32”
HK-316P 3/16”
HK-732P 7-32”
Use for socket fasteners with or without pin
Tri-Groove Socket
Oilized Carbon Steel
Part No: For
Nut Size Tool Type
TN-38/516P 5/16” & 3/8” Prong
TN-38/516S 5/16” & 3/8” Socket
Use for Tri-Groove nuts
Round Head Socket
Die Cast Aluminum
Part No: For
Bolt Size
VB-12 SOCKET 1/2”
Use for round head bolts with vandal resistant design
TN-38/516P
TN-38/516S
Page 47
www.dynabrackets.com Page 47 info@dynabrackets.com
Clamshell Mounts, Push Button Cups & Signal Arms Dyna Engineering’s traffic signal accessories are made from high-pressure die cast aluminum and extruded aluminum for a fully corrosion resistant hardware set. These parts are in stock and available to ship at any time. Please contact us for free samples. Other powder coating colours are also available.
CLAMSHELL MOUNT-Y Installation Specifications:
For Mounting Pedestrian Signals • Signal-to-Post Installation • 5/16” Bolt To Signal • Bolts/Straps To All Lamp Posts
Part No: Colour Signal Size
CLAMSHELL MOUNT-Y Yellow 16”
Traffic yellow powder coated finish Symmetrical mounting holes for left or right mount Installed half on the post and half on the signal housing allows easy detachment of signal Neoprene gaskets to seal out moisture
PBC-Y Installation Specifications:
For Mounting Pedestrian Buttons • Button-to-Post Installation • #8-32 Bolt To Button • Bolts To All Lamp Posts
Part No: Colour Cup Diameter
PBC-Y Yellow 3-3/8”
Traffic yellow powder coated finish
TA-12 Installation Specifications:
For Mounting Traffic Signals • Signal-to-Post Installation • Hex Head Pipe Nipple Clamps Signal To Arm • Straps To All Lamp Posts
Part No: Colour Arm Length
TA-12 Aluminum 12”
Elbow and hex head pipe nipple design allows for easy removal of signal without dismounting the arms
Page 48
www.dynabrackets.com Page 48 info@dynabrackets.com
TS-40F TS-41F TS-22
Folding Sign Stand Heavy Folding Sign Stand Fully Collapsible Sign Stand
Material: 5mm Steel Flat Bar Weight: 9 LBS Footprint: 34” x 30” Height: 34-1/2” (Deployed) 40” (Folded) Colour: Black Flagholder: 2 flags (3/4” diameter) Sign Size: Up to 750mm x 750mm Up to 3/8” Thick
Material: 10mm Steel Flat Bar Weight: 16 LBS Footprint: 33” x 34” Height: 40” (Deployed) 46” (Folded) Colour: Black Flagholder: 2 flags (3/4” diameter) Sign Size: Up to 750mm x 750mm Up to 3/8” Thick
Material: 1” Steel Square Tube Weight: 10 LBS Footprint: 40” x 34” Height: 33” (Deployed) 39-1/2” (Folded) Colour: Red-Orange Flagholder: Separate Attachment Sign Size: Up to 750mm x 750mm Up to 3/8” Thick
Light weight Easy to handle
Heavy duty Resists wind
Built-in sandbag holder MF-23 flagholder available
MF-23
Flagholder For TS-22
Material: 1” Steel Round Pipe Weight: 2 LBS Footprint: 40” x 34” Height: 53” (Deployed) Colour: Red-Orange Flagholder: 3 flags (3/4” diameter)
Can also mount one barricade light
FA-27
Class 1 A-Frame Barricade Leg
Hole Size: 2” x 6” Standard Boards Material: 6mm Steel Flat Bar Weight: 7.5 LBS Width: 34” Height: 35-1/2” Colour: Red-Orange
Welded bottom support bar For standard 2”x6” barricade boards
Traffic Sign Stands and Barricade Legs Dyna Engineering’s sign stands make up the staple of sign stands used in British Columbia for over the past 10 years. From l ight-weight to heavy-duty to fully-collapsible, we have options available to suit the different needs of personnel, truck fleets and jobsites. All of these stands and frames are made from steel flat bar or steel square tube for the most economical rigidity and strength. They are finished with a durable weather resistant powder coating to withstand rough handling and all weather conditions. As the original mass manufacturer with thousands of our sign stands seen on the roads every year, our experience in manufacturing steel stands for the traffic industry allows us to manufacture any type of sign stand very economically.
Page 49
www.dynabrackets.com Page 49 info@dynabrackets.com
TRAFFIC CONES Specifications:
• Brilliant Fluorescent Orange With UV Stabilizers • Meets MOT And MUTCD Standards • Reflective Collars Meet ASTM D4956-09 Standards • Soft, Flexible And Reboundable PVC
For Work Zone Safety
Part No: Height Actual Weight
Colour Body / Base
6” Collar Included
4” Collar Included
Reflective Grade
CNO-4-O 4” 0.12 LBS Orange / Orange No No -
CNO-6-O 6” 0.35 LBS Orange / Orange No No -
CNO-12-O CNO-12-O-H4 CNO-12-O-D4
12” 12” 12”
1.50 LBS 1.56 LBS 1.55 LBS
Orange / Orange Orange / Orange Orange / Orange
No No No
No Yes Yes
- HI DG
CNO-18S-O CNO-18S-O-H6 CNO-18S-O-D6
18” 18” 18”
2.75 LBS 2.85 LBS 2.84 LBS
Orange / Orange Orange / Orange Orange / Orange
No Yes Yes
No No No
- HI DG
CNO-18S-B CNO-18S-B-H4 CNO-18S-B-H6 CNO-18S-B-D6
18” 18” 18” 18”
2.75 LBS 2.82 LBS 2.85 LBS 2.84 LBS
Orange / Black Orange / Black Orange / Black Orange / Black
No No Yes Yes
No Yes No No
- HI HI DG
CNO-28-O CNO-28-O-H6 CNO-28-O-H6H4 CNO-28-O-D6 CNO-28-O-D6D4
28” 28” 28” 28” 28”
6.60 LBS 6.70 LBS 6.83 LBS 6.68 LBS 6.79 LBS
Orange / Orange Orange / Orange Orange / Orange Orange / Orange Orange / Orange
No Yes Yes Yes Yes
No No Yes No Yes
- HI HI DG DG
CNO-28-B CNO-28-B-H6 CNO-28-B-H6H4 CNO-28-B-D6 CNO-28-B-D6D4
28” 28” 28” 28” 28”
6.60 LBS 6.70 LBS 6.83 LBS 6.68 LBS 6.79 LBS
Orange / Black Orange / Black Orange / Black Orange / Black Orange / Black
No Yes Yes Yes Yes
No No Yes No Yes
- HI HI DG DG
CNO-36-O CNO-36-O-H6 CNO-36-O-H6H4 CNO-36-O-D6 CNO-36-O-D6D4
36” 36” 36” 36” 36”
9.50 LBS 9.60 LBS 9.69 LBS 9.58 LBS 9.66 LBS
Orange / Orange Orange / Orange Orange / Orange Orange / Orange Orange / Orange
No Yes Yes Yes Yes
No No Yes No Yes
- HI HI DG DG
CNO-36-B CNO-36-B-H6 CNO-36-B-H6H4 CNO-36-B-D6 CNO-36-B-D6D4
36” 36” 36” 36” 36”
9.50 LBS 9.60 LBS 9.69 LBS 9.58 LBS 9.66 LBS
Orange / Black Orange / Black Orange / Black Orange / Black Orange / Black
No Yes Yes Yes Yes
No No Yes No Yes
- HI HI DG DG
Available in a solid one-piece orange construction or an interlocking non-removable black base style We can also apply reflective collars that you send to us (this helps when you need screen printed reflective collars)
Page 50
www.dynabrackets.com Page 50 info@dynabrackets.com
DELINEATORS Specifications:
For Work Zone Safety • Brilliant Fluorescent Orange With UV Stabilizers • Recessed Collars To Preserve Reflective Sheeting Life • Meets MOT And MUTCD Standards • Reflective Collars Meet ASTM D4956-09 Standards • Soft, Flexible And Reboundable Polyethylene (PVC) • DE-4BASE11 Bases Have Built-In Carrying Handles
Part No: Height Actual Weight
Colour 4” Collars Included
Reflective Grade
DE-4BASE10 DE-4BASE10-SQ
- -
10 LBS 10 LBS
Black Black
- -
- -
DE-4POST-L DE-4POST-L-H DE-4POST-L-D
42” 42” 42”
1.87 LBS 1.96 LBS 1.95 LBS
Orange Orange Orange
No Yes Yes
- HI DG
DE-4POST-T DE-4POST-T-H DE-4POST-T-D
42” 42” 42”
1.89 LBS 1.98 LBS 1.97 LBS
Orange Orange Orange
No Yes Yes
- HI DG
Posts have built-in bolt holes to mount signs or barricade lights We can also apply reflective collars that you send to us (this helps when you need screen printed reflective collars) DE-4POST-L
DE-4POST-T
New DE-4BASE10-SQ available! Flexible and extremely durable Made from vulcanized recycled rubber
Page 51
www.dynabrackets.com Page 51 info@dynabrackets.com
DL-3 Specifications:
6V LED Work Zone Barricade Light • Meets ITE Purchase Specification For Warning Lights • Can Perform Flashing And Steadyburn Functions
Part No: Lens
Colour Fasteners Included
Battery Type
Bulb Type
Body Colour
DL-3A-6V (U) DL-3A-6V (3.25) DL-3A-6V (3.75)
Amber Amber Amber
No Yes Yes
6V 6V 6V
LED LED LED
Yellow Yellow Yellow
DL-3R-6V (U) DL-3R-6V (3.25) DL-3R-6V (3.75)
Red Red Red
No Yes Yes
6V 6V 6V
LED LED LED
Yellow Yellow Yellow
Can be operated with 1 or 2 batteries Fasteners: -1/2” x 3-1/4” Vandal-Bolts (x1) With (3.25) Version -1/2” x 3-3/4” Vandal-Bolts (x1) With (3.75) Version -Vandal-Bolt Installation Socket Tool (x1 per 10pcs) -Switch Pin (x1)
Housing Features: Impact-resistant housing with UV stabilizers Fitted to hold 2pcs 6V spring-top batteries Battery polarity terminals clearly marked on the case for easy battery installation Lens Features: 7” lens diameter, fresnel-design for maximum light performance Lens is constructed from high-strength polycarbonate (PC) material 1/2” retro-reflective outer ring Lens is assembled with 5 screws and 5 nuts to create a water-tight seal LED Circuitry: LED designed to point directly into center of lens even as lens rotates 3mm super-bright LED, 3000—5000mcd light output 100,000 hours of LED life expectancy Energy saving LED technology incorporated into circuitry design Dual-mode combination type A and C, flashing or steadyburn functions Positive-action flash/steady/off switch Built-in photocell automatically turns the light on/off depending on lighting conditions Circuitry is wired in parallel so only 1pc 6V spring-top battery is required to function Flash rate is 60+/- 5 flashes per minute Solid-state circuitry is shock resistant Circuitry is designed to be easily replaceable Equipped with “First Flash” function
BT-6V-HD or BT-6V-ALK 6V batteries are available to operate the barricade light DL-12ZP1.25BP bolt protector is available to make the barricade light more vandal resistant
First Flash Function All DL-3’s are equipped with our “First Flash” function. The LED will flash once as soon as the barricade light is switched into the “ON” position. This works regardless of the surrounding light conditions. The function helps with checking whether the batteries are still operational even during the day time. Rather than trying to “shade” the barricade light to trigger the photocell to activate the flashing, this feature offers a quick and easy method to service this barricade light in the field. Simply by turning the barricade light off and on, the light will flash indicating the batteries are still operational.
Page 52
www.dynabrackets.com Page 52 info@dynabrackets.com
DL-DLITE Specifications:
D-Cell LED Work Zone Barricade Light • Meets ITE Purchase Specification For Warning Lights • Can Perform Flashing And Steadyburn Functions
Part No: Lens
Colour Fasteners Included
Battery Type
Bulb Type
Body Colour
DL-DLITE-A (U) DL-DLITE-A (3.25) DL-DLITE-A (3.75)
Amber Amber Amber
No Yes Yes
D-CELL D-CELL D-CELL
LED LED LED
Yellow Yellow Yellow
DL-DLITE-R (U) DL-DLITE-R (3.25) DL-DLITE-R (3.75)
Red Red Red
No Yes Yes
D-CELL D-CELL D-CELL
LED LED LED
Yellow Yellow Yellow
Can be operated with 2 or 4 batteries Fasteners: -1/2” x 3-1/4” Vandal-Bolts (x1) With (3.25) Version -1/2” x 3-3/4” Vandal-Bolts (x1) With (3.75) Version -Vandal-Bolt Installation Socket Tool (x1 per 10pcs) -Switch Pin (x1) -Bolt Protector (x1)
Housing Features: Impact-resistant housing with UV stabilizers Fitted to hold 4pcs D-CELL batteries Battery polarity terminals clearly marked on the case for easy battery installation Housing encases the lens to protect the entire unit during impact Lens Features: 7” lens diameter Lens is constructed from high-strength polycarbonate (PC) material 1/2” retro-reflective outer ring Lens is assembled with 4 screws and 4 nuts to create a water-tight seal LED Circuitry: LED designed to point directly into center of lens even as lens rotates Super-bright LED, 14000+mcd light output 100,000 hours of LED life expectancy Energy saving LED technology incorporated into circuitry design Dual-mode combination type A and C, flashing or steadyburn functions Built-in photocell automatically turns the light on/off depending on lighting conditions Circuitry is wired in parallel so only 2pc D-CELL batteries are required to function Flash rate is 65+/- 6 flashes per minute
Page 53
www.dynabrackets.com Page 53 info@dynabrackets.com
DL-MAVERICK Specifications:
Solar LED Work Zone Barricade Light • Meets ITE Purchase Specification For Warning Lights • Can Perform Flashing And Steadyburn Functions
Part No: Lens
Colour Fasteners Included
Battery Type
Bulb Type
Body Colour
DL-MAVERICK-A (U) DL-MAVERICK-A (3.25) DL-MAVERICK-A (3.75)
Amber Amber Amber
No Yes Yes
Solar Solar Solar
LED LED LED
Yellow Yellow Yellow
DL-MAVERICK-R (U) DL-MAVERICK-R (3.25) DL-MAVERICK-R (3.75)
Red Red Red
No Yes Yes
Solar Solar Solar
LED LED LED
Yellow Yellow Yellow
Solar Powered (No Batteries Required) Fasteners: -1/2” x 3-1/4” Vandal-Bolts (x1) With (3.25) Version -1/2” x 3-3/4” Vandal-Bolts (x1) With (3.75) Version -Vandal-Bolt Installation Socket Tool (x1 per 10pcs) -Switch Pin (x1) -Bolt Protector (x1)
Housing Features: Impact-resistant housing with UV stabilizers Housing encases the lens to protect the entire unit during impact Lens Features: 7” lens diameter Lens is constructed from high-strength polycarbonate (PC) material 1/2” retro-reflective outer ring Lens is assembled with 4 screws and 4 nuts to create a water-tight seal LED Circuitry: LED designed to point directly into center of lens even as lens rotates Super-bright LED, 14000+mcd light output 100,000 hours of LED life expectancy Energy saving LED technology incorporated into circuitry design Dual-mode combination type A and C, flashing or steadyburn functions Built-in photocell automatically turns the light on/off depending on lighting conditions Flash rate is 65+/- 6 flashes per minute Solar Operation: Solar panel is rated at 0.4w Self-charging rechargeable battery pre-installed Can operate up to 5 nights on a single charge Recharges even during cloudy weather No regular battery service required Environmentally friendly Eliminates need for battery disposal
Page 54
www.dynabrackets.com Page 54 info@dynabrackets.com
TW-1 Specifications:
LED Baton • Can Perform Flashing And Steadyburn Functions • Flashlight Mode Available For TW-1-W and TW-2-W
Part No: Bulb Type
Battery Type
Colour
TW-1 TW-1-W TW-2-W
LED LED/Flashlight LED/Flashlight
D-CELL D-CELL C-CELL
Red Red/White Red/White
Work Zone LED Baton Battery Operated
TW-1 Housing Features: Impact-resistant housing with UV stabilizers Fitted to hold 2pcs D-CELL batteries 21-1/2” overall length 13-1/2” x 1-1/2” OD reflectorized length Water resistant Wrist strap included Easy to handle
TW-2 Housing Features: Impact-resistant housing with UV stabilizers Fitted to hold 2pcs C-CELL batteries 21” overall length 13” x 1-1/4” OD reflectorized length Water resistant Wrist strap included Easy to handle
LED Circuitry: 6 LED’s distributed uniformly along the reflectorized length (+1 white LED for flashlight versions) Super-bright LED’s 100,000 hours of LED life expectancy Energy saving LED technology incorporated into circuitry design Flashing or steadyburn functions (+ flashlight mode for TW-1-W and TW-2-W)
Bright white LED flashlight built-in! Available in a standard D-cell style as TW-1-W Available in a lightweight C-cell style as TW-2-W
Page 55
www.dynabrackets.com Page 55 info@dynabrackets.com
Part No: Bulb Type
Battery Type
Lens Colour
Body Colour
EFL-100-A LED D-CELL Amber Yellow
EFL-100-R LED D-CELL Red Yellow
LED Emergency Road Safety Flare Battery Operated
Housing Features: Impact-resistant housing with UV stabilizers Fitted to hold 2pcs D-CELL batteries Battery polarity terminals clearly marked on the case for easy battery installation Water-tight design Can be used as a hand-held signaling device When mounted with base LED’s are 9” above ground increasing viewing distance Lens Features: 2” lens diameter Lens is constructed from high-strength polycarbonate (PC) material LED Circuitry:
12 LED’s mounted around the top providing 360° visibility
Super-bright LED’s 100,000 hours of LED life expectancy Energy saving LED technology incorporated into circuitry design Dual-mode combination flashing or steadyburn functions Solid-state circuitry is shock resistant Provides emergency lighting without heat, flames or sparks
Part No: Actual Weight
Colour
EFL-RUBBER BASE 0.83 LBS Black
Black Rubber Base EFL-100 Add On
Page 56
www.dynabrackets.com Page 56 info@dynabrackets.com
Bolt Protectors
Zinc Plated Inside
Diameter
Vandal Resistant
Design
Outside Diameter Part No:
DL-12ZP1.25BP 1/2” Yes 1-1/4”
Part No: Battery Type
Voltage
BT-6V-HD BT-1.5V-DC-ALK
Heavy Duty Alkaline
6V 1.5V
6V Spring-Top Battery
Plastic Housing 0% Mercury & 0% Cadmium
Part No: Bulb Type
LED Colour
Flash & Steadyburn
Installation
DL-3A-6V-CIRCUIT LED Amber Yes Snap-In
DL-3R-6V-CIRCUIT LED Red Yes Snap-In
Replacement Inner Circuit For DL-3A-6V Replacement Inner Circuit For DL-3R-6V
Part No: Material LED
Colour Installation
DL-3A-LENS Polycarbonate (PC) Amber Screws / Nuts
DL-3R-LENS Red Screws / Nuts Polycarbonate (PC)
Replacement Lens For DL-3A Replacement Lens For DL-3R
Lens Features: 7” lens diameter, fresnel-design for maximum light performance Lens is constructed from high-strength polycarbonate (PC) material 1/2” retro-reflective outer ring Lens is assembled with 5 screws and 5 nuts to create a water-tight seal
Part No: Material Diameter Length
DL-PIN Zinc Plated 1/16” 1”
Switch Pin
See page 33 for more details
See page 35 for more details
BT-6V-HD BT-1.5V-ALK
Page 57
www.dynabrackets.com Page 57 info@dynabrackets.com
Reflective Collars For Delineators
Part No: Brand Width Length Reflective
Grade
RS-4HI13 Standard 4” 13” HI
RS-4DG13 Standard 4” 13” DG
Pre-Cut Reflective Collars For Delineators
Conforms to applicable ASTM D4956-09 retro-reflective standards
Reflective Collars For Traffic Cones
6” Upper Collar Part No:
4” Lower Collar Part No:
Reflective Grade
All-Orange Traffic Cones
RS-H601 RS-D601
HI DG
CNO-18S-O
RS-H602 RS-D602
RS-H451 RS-D451
HI DG
CNO-28-O
RS-H603 RS-D603
RS-H452 RS-D452
HI DG
CNO-36-O
6” Upper Collar Part No:
4” Lower Collar Part No:
Reflective Grade
Black Base Traffic Cones
RS-H602 RS-D602
HI DG
CNO-18S-B
RS-H602 RS-D602
RS-H451 RS-D451
HI DG
CNO-28-B
RS-H604 RS-D604
RS-H454 RS-D454
HI DG
CNO-36-B
Pre-Cut Reflective Collars For Traffic Cones
Conforms to applicable ASTM D4956-09 retro-reflective standards
Reflective Sheeting Rolls
Part No: Brand Width Length Reflective
Grade
RS-HI-4-W Standard 4” 150 FT HI
RS-DG-4-W Standard 4” 150 FT DG
Reflective Sheeting In Full Rolls
Conforms to applicable ASTM D4956-09 retro-reflective standards
Recommended