Laying the Earth Flat - University of Texas at Austin...Geo327G/386G: GIS & GPS Applications in...

Map Projections & Coordinate Systems 9/2/2020

GEO327G/386G, UT Austin 1

Geo327G/386G: GIS & GPS Applications in Earth SciencesJackson School of Geosciences, University of Texas at Austin

Map Projections & Coordinate Systems

9/2/2020 1Geo327G/386G: GIS & GPS Applications in Earth Sciences

Jackson School of Geosciences, University of Texas at Austin

From Last Time - Datums

Datum = Reference surface

❑Horizontal Datum – a reference ellipsoid, of a specific size and placement, for deriving and recording Lat. & Long.

❑ Smaller ellipsoids will give different Lat. & Long. than larger; geocentric give different result than nongeocentric

❑ Vertical Datum – a reference surface of zero elevation

❑e.g. an equipotential surface of gravity, the Geoid (Orthometric Heights)

❑e.g. a reference ellipsoid (ellipsoid heights or Heights above Ellipsoid, H.A.E.)

❑Datum Shifts – Differences in horizontal datums result in differences in Lat. & Long. for the same point, therefore we must know the datum before plotting the point or it can be “shifted” from its actual location.

9/2/2020 2


Laying the Earth Flat

❑Why?

❑Need convenient means of measuring and comparing distances, directions, areas, shapes in Cartesian coordinates

❑Traditional surveying instruments measure in meters or feet, not degrees of lat. & lon.

❑Globes are bulky and can’t show detail.❑1:24,000 globe would have diameter of ~ 13 m

❑Typical globe has scale of ~ 1:42,000,000

❑Distance & area computations more complex on a sphere.



Laying the Earth Flat❑How?

❑Projections – transformation of curved earth to a flat map; systematic rendering of the lat. & lon. graticule to rectangular coordinate system.

9/2/2020 4

Scaled Map distance

True distance

Globe distance

Earth distance

Scale

1: 42,000,000

Scale Factor

0.9996

Peters Projection

Earth Globe Map

(“distortion factor”)





❑Systematic rendering of Lat. (f) & Lon. (l) to cartesian (x, y) coordinates:

9/2/2020 5

Geographic Coordinates

(f, l)

Projected Coordinates

(x, y)

0, 0x

y

Map Projection



❑“Geographic” display – no projection

❑x = l, y = f

❑Grid lines have same scale and spacing

9/2/2020 6

y

x

l

f


“Geographic” Display

❑Distance and areas distorted by varying amounts (scale not “true”);e.g. high latitudes

9/2/2020 7

y

x

l

f


Projected Display

❑E.g. Mercator projection:

❑ x = l

❑ y = ln [tan f + sec f]

9/2/2020 8

y

f0

90

0 5+

l

f

y

x





❑How?

Projection types (“perspective” classes):

9/2/2020 9

aA’

bB’

aA’

bB’

aA’

bB’

Orthographic Gnomonic Stereographic

TT’

T T’ TT’


Light Bulb at Center (Gnomic)

❑ Grid Lines “out of focus” away from point of tangency

9/2/2020 10


Orthographic

❑ Light source at infinity; neither area or angles are preserved, except locally

9/2/2020 11

T’T’


Gnomonic

❑All great circles are straight lines

❑ Same as image produced by spherical lens

9/2/2020 12

T’ T’




Stereographic

❑Projection is conformal, preserves angles and shapes for small areas near point of tangency, larger areas away from point are

distorted. Great circles are circles.

9/2/2020 13

T’T’

90o


Developable Surfaces

❑Surface for projection:❑Plane (azimuthal projections)

❑Cylinder (cylindrical projections)

❑Cone (conical projections)

Cylinder and cone produce a line of intersection (standard parallel) rather than at a point

9/2/2020 14

Standard

ParallelT’


3 orientations for developable surfaces

Normal

Transverse

Oblique



Tangent or Secant?

❑Developable surfaces can be tangent at a point or line, or secant if they penetrate globe❑Secant balances distortion over wider region

❑Secant cone & cylinder produce two standard parallels

9/2/2020 16

Standard

Parallels




Tangent or Secant?



Projection produces distortion of:

❑Distance

❑Area

❑Angle – bearing, direction

❑Shape

Distortions vary with scale; minute for large-scale maps (e.g. 1:24,000), gross for small-scale maps (e.g. 1: 5,000,000)

Goal: find a projection that minimizes distortion of property of interest

9/2/2020 18


Where’s the distortion?

❑No distortion along standard parallels, secants or point of tangency.

❑For tangent projections, distortion increases away from point or line of tangency.

❑For secant projections, distortion increases toward and away from standard parallels.

9/2/2020 19

Tangent Secant

Secant line


Distortions

Azimuthal Cylindrical Conic

9/2/2020 20




How do I select a projection?

❑Scale is critical – projection type makes very little difference at large scales

❑For large regions or continents consider:❑Latitude of area❑Low latitudes – normal cylindrical

❑Middle latitudes – conical projection

❑High latitudes – normal azimuthal

❑Extent❑Broad E-W area (e.g. US) – conical

❑Broad N-S area (e.g. S. America) – transverse cylindrical

❑Theme❑e.g. Equal area vs. conformal (scale same in all directions)



What needs to be specified?

9/2/2020 22

Geographic (unprojected) Texas Albers (Equal Area Conic)

Origin X, Y Values

Secant Locations

Horizontal Datum

Origin Latitude (x axis)

Origin Longitude (y axis)

Units of measure

Ellipsoid Model


Projections in common use, US

❑Albers Equal Area Conic❑Standard parallels at 29o30’ and 45o30’ for conterminous US. Latitude

range should not exceed 30-35o

❑Preserves area, distorts scale and distance (except on standard parallels!)

❑Areas are proportional and directions true in limited areas




❑Lambert Conformal Conic❑Projection used by USGS for most maps of conterminous US (E-W

extent is large)

❑Used by SPCS for state zones that spread E-W (Texas)

❑Conformal

9/2/2020 24





❑Cylindrical

❑Transverse Mercator – basis for UTM coordinate system and State Plane Coordinate Systems that spread N-S

9/2/2020 25

Standard Parallels

3o

apart


Rectangular Coordinate Systems

❑Universal Transverse Mercator (UTM)❑US military developed for global cartesian reference frame.

❑State Plane Coordinate System (SPCS)❑Coordinates specific to states; used for property

definitions.

❑Public Land Survey System (PLS)❑National system once used for property description

❑no common datum or axes, units in miles or fractional miles.

9/2/2020 26


UTM Coordinate System

❑T. M. secant projection is rotated about vertical axis in 6o increments to produce 60 UTM zones.

9/2/2020 27

UTM Zone is 6o

wide

Rotate in 6o

increments

(x)

(y)



❑T. M. secant projection is rotated about vertical axis in 6o

increments to produce 60 UTM zones.

❑Zone boundaries are parallel to meridians.

❑Zones numbered from 180o (begins zone 1) eastward and extend from 80o S to 84o N.

❑Each zone has a central meridian with a scale factor in US of 0.9996 (central meridian is farthest from secants, meaning scale distortion is greatest here).

❑Secants are 1.5o on either side of the central meridian.

9/2/2020 28

http://www.dmap.co.uk/utmworld.htmhttp://www.dmap.co.uk/utmworld.htm





❑Zone boundaries are parallel to meridians.

❑Zones numbered from 180o (begins zone 1) eastward and extend from 80o S to 84o N.

9/2/2020 29

1011

1213 14 15 16 17

18

19

UTM Zones

920



❑Central meridian of each zone in US has a scale factor of 0.9996 (max. distortion).

❑Secants are 1.5o on either side of the central meridian.

9/2/2020 30

(x)

(Y)



9/2/2020 31

y

x

N. Hemisphereorigin is

(500,000m, 0)

x

y

S. Hemisphereorigin is

(500,000m, 10,000,000m)

Locations are given in metersfrom central meridian (Easting) and equator (Northing).

(-) Eastings avoided by giving X value of 500,000 m (“false easting”) to the Central Meridian

In S. hemisphere, equator is given “false northing” of 10,000,000 m to avoid (-) Northings.



9/2/2020 32

UTM Coordinates for central Austin:

Zone 14 621,000 mE, 3,350,000

mNCentral Meridian(X = 500,000 m)

Y

Zone 14

Austin

99oW

Y = 3,000,000 mN




State Plane Coordinate System (SPCS)

❑Developed in 1930’s to provide states a reference system that was tied to national datum (NAD27); units in feet.

❑Updated to NAD83, units in meters; some maps still show SPCS NAD27 coordinates.

❑Some larger states are divided into “zones”.

❑X, Y coordinates are given relative to origin outside of zone; false eastings and northings different for each zone.



Texas NAD83 SPCS (meters)

9/2/2020 34

Zone Code

Stand. Parallels

Origin F. EastingF. Northing

4201North

34.65036.183

-101.5034.00

200,0001,000,000

4202N. Cent.

32.13333.967

-98.5031.67

600,0002,000,000

4203Central

30.11731.883

-100.3329.67

700,0003,000,000

4204S. Cent.

28.38330.283

-99.0027.83

600,0004,000,000

4205South

26.16727.833

-98.5025.67

500,0005,000,000

Austin

Austin:Central Zone ~ 944,000mE

~ 3,077,000mN

X

Y


Public Land Survey System (PLSS)

❑System developed to survey and apportion public lands in the US, c. 1785

❑Coordinate axes are principal baselines and meridians, which are distributed among the states.

❑Grid system based on miles and fractional miles from baseline and meridian origin.

❑Not in Texas, nor 19 other states

❑Units are miles and fractional miles; feet and yards are also in use.



Principal Baselines & Meridians

9/2/2020 36

No P.L.S.

P.L.S.

Baseline

Principal Meridian

(+ Alaska)




PLSS Nominal Townships and Sections

9/2/2020 37

• Township:Nominally 36 mi2

Section:Nominally 1 mi2 (640 acres)• Once surveyed, Section

and Township corners, by law, were accepted as “True”

• Adjustments for different Principle Meridians, survey errors & graft resulted in irregularities

From Bolstad, Fig. 3-50


Public Land Survey System (PLS)

9/2/2020 38

Step 1Step 2

Step 3

T2S, R1W, Section 33

Section 33

Center Sec. 33

Baseline

Meridian


Summary

❑Projections transform geographic coordinates (f, l) to cartesian (x, y).

❑Projections distort distance, area, direction and shape to greater or lesser degrees; choose projection that minimizes the distortion of the map theme.

❑Points of tangency, standard parallels and secants are points or lines of no distortion.

❑A conformal map has the same scale in all directions.



Summary (cont.)

❑Projection characteristics are classified by:❑ Light source location❑Gnomonic

❑Stereographic

❑Orthographic

❑Developable surface❑Plane (azimuthal)

❑Cylinder (cylindrical)

❑Cone (conic)

❑Orientation ❑Normal

❑Transverse

❑Oblique

9/2/2020 40




Summary (cont.)

❑Modern coordinate systems are based on projections that minimize distortion within narrow, conformal zones.

❑UTM is a global system using WGS84/NAD83; others are local with varying datums.

9/2/2020 41

Laying the Earth Flat - University of Texas at Austin...Geo327G/386G: GIS & GPS Applications in...

Documents

The Global Positioning System€¦ · Geo327G/386G: GIS & GPS Applications in Earth Sciences Jackson School of Geosciences, University of Texas at Austin The Global Positioning System

Digital Elevation Models - geo.utexas.edu · 16-Oct-18 12. Digital Elevation Models 10/16/2018 GEO327G/386G, UT Austin 4 ... SRTM Coverage ~ 60oN to 56oS latitude ~ 80% of land surface

Austin Journal of Proteomics, Bioinformatics Austin

More than electricity City of Austin. Austin Energy – City of Austin Serving Austin Since 1895 Austin Energy is the nation’s 8th largest publicly owned

Conceptual Models ESRI* Object Models; Data Capturecourses.geo.utexas.edu/courses/371c/lectures/Fall...ESRI Object Models and Data Capture 9/13/2018 GEO 327G/386G, UT Austin 2 Geo327G/386G:

GEO326G/386G: What is GIS? - University of Texas at Austin

GEO327G/386G: Spatial Interpolation · Spatial Interpolation - Geostatistics 10/28/2014 GEO327G/386G, UT Austin 3 10/28/2014 GEO327G/386G, UT Austin 9 I.D.W. Characteristics Is an

ESRI* Object Models; Data Capture - Jackson School of ... Rings –“Island” or “Atoll” polygons point multipoint polyline. 9/8/2016 M. Helper GEO327G/386G, UT Austin 23 Shapefile

Map Projections & Coordinate SystemsGeo327G/386G: GIS & GPS Applications in Earth SciencesJackson School of Geosciences, University of Texas at Austin Map Projections & Coordinate

The Global Positioning System€¦ · The Global Positioning Sytem II 10/13/2015 M. Helper, GEO 327G/386G, UT Austin 4 High-Tech Mapping Tools Field Hardware Windows CE or PocketPC

Austin Journal of Orthopedics & Austin Rheumatology

AUSTIN austin - Austin, Texasaustintexas.gov/sites/default/files/files/Transportation/Complete... · AUSTIN austin A GUIDE TO CITY OF AUSTIN RESOURCES ... or take transit in Austin

Spatial Interpolation & Geostatistics€¦ · Geo327G/386G: GIS & GPS Applications in Earth Sciences Jackson School of Geosciences, University of Texas at Austin Spatial Interpolation

Raster Analysis: An Example · Raster Analysis: An Example Fires (1 or 4) Slope (1-4) Geology (1-4) Erosion Ranking (3-12) + 10/31/2017 1 . Geo327G/386G: GIS & GPS Applications in

What is GIS?€¦ · Geo327G/386G: GIS & GPS Applications in Earth Sciences Jackson School of Geosciences, University of Texas at Austin GIS = Geographic Information System(s) Computerized

Austin Journal of Nanomedicine & Austin Nanotechnology

Geodesy, Geographic Datums & Coordinate Systems › ... › Fall19 › Datums_GCSs_Fall19.pdf · Geo327G/386G: GIS & GPS Applications in Earth Sciences Jackson School of Geosciences,

GEO327G: GIS GPS Applications Earth Sciences

GEO327G/386G: Spatial Interpolation

The Global Positioning System - University of Texas at Austin · GPS Accuracy –Generic Terminology 10/11/2016 GEO37G-386G, UT Austin 5-33 Satellite-Based Augmentation Systems, e.g