View
227
Download
0
Category
Preview:
Citation preview
7/30/2019 LM PLC Catalogue-1
1/34
LM SERIES PLC CONTENT
CPU Modules
LM3104 (8 Channels DC24V DI, 6 Channels Transistor DO) -------------------------------------------1
LM3105 (8 Channels DC24V DI, 6 Channels Relay DO) ------------------------------------------------3
LM3106 (14 Channels DC24V DI, 10 Channels Transistor DO) ----------------------------------------5
LM3106A (Only for Motion Control,14 Channels DC24V DI, 10 Channels Transistor DO) -------7
LM3107 (14 Channels DC24V DI, 10 Channels Relay DO) ---------------------------------------------9
LM3108 (24 Channels DC24V DI, 16 Channels Transistor DO)---------------------------------------11
LM3109 (24 Channels DC24V DI, 16 Channels Relay DO)--------------------------------------------13
Expansion Digi tal I/O Modules
LM3210 (8 Channels DI,DC24V ) -------------------------------------------------------------------------15
LM3211 (8 Channels DI,AC220V ) ------------------------------------------------------------------------16LM3212 (16 Channels DI,DC24V) ------------------------------------------------------------------------17
LM3220 (8 Channels Transistor DO,DC24V) ------------------------------------------------------------18
LM3221 (16 Channels Transistor DO,DC24V) ----------------------------------------------------------19
LM3222 (8 Channels Relay DO,DC24V) -----------------------------------------------------------------20
LM3223 (8 Channels Relay DO,DC24V) -----------------------------------------------------------------21
LM3230 (DI 4DC24V+DO 4DC24V Transistor) -----------------------------------------------------22
LM3231 (DI 4DC24V+DO 4DC24V Relay)-----------------------------------------------------------24
Expansion Analog I/O Modules
LM3310 (4 Channels Analog Input) -----------------------------------------------------------------------26
LM3311 (4 Channels Thermal Couple Input) ------------------------------------------------------------27
LM3312 (4 Channels RTD Input) -------------------------------------------------------------------------28
LM3313 (8 Channels Analog Input) ----------------------------------------------------------------------29
LM3314 (8 Channels NTC Input) -------------------------------------------------------------------------30
LM3320 (2 Channels Analog Output) ---------------------------------------------------------------------31
Communication Modules
LM3401 (Profibus-DP Slave Station Module) ------------------------------------------------------------32
LM3403 (Ethernet Module) ---------------------------------------------------------------------------------33
7/30/2019 LM PLC Catalogue-1
2/34
CPU Module LM3106 (14CH DI, 10CH DO)
Rated Voltage: 24V DC
14 Channels DC24V DI, 10 Channels Transistor DO
Program Memory Capacity: 28KB/120KB
Interrupt Input: 3 Points
Expandable I/O: 4 Modules
CPU Features
Local I/O 14 Channels DC24V DI, 10 Channels Transistor DO
Expandable I/O 4 modules
High-speed counterMonophase counter: 3 points, 100KHz
Biphase counter: 2 points, 100KHz
Pulse output 2 point 20KHz
Pulse catch 3 points
Interrupt input 3 points
Analog potentiometer 2, value setting range 0255
User program memory
capacity28K bytes/120K bytes
Retain area 512 bytes/6K bytes
Input data memory 512 bytes
Output data memory 512 bytes
Mid-variables memory 8K bytes
Global memory 24K bytes
Password Yes
Real-time clock Built-in
Timer No limit (1ms as minimum unit)
Counter No limit (Maximum counting range: 16 bit)
Basic instructions 283
Function blocks Over 70
Operation speed 0.65s (Basic instruction)
Power Supply Specifications
Power supply 24V DC
Allowed range 21V DC27V DC
Current consumption (MAX) 1300mA
Output voltage 24V DC
Allowed range 22.8V DC25.2V DC
+24VDC (To expansion bus) 300mACurrent output
+24V DC (To the outside) 300mA
7/30/2019 LM PLC Catalogue-1
3/34
+5V DC (To expansion bus) 800mA
Short circuit protection 400mA, 24VDC output
Communication Features
Communication interface 1 RS-232 (Non-isolating)
Communication protocol Proprietary protocol/MODBUS/Free protocol
Input Features
Input type Sink/Source
Input voltage rated value 24V DC
Allowed range 0V DC30V DC
Logic 1 signal 1530V DC
Logic 0 signal 05V DC
Input delay time
7/30/2019 LM PLC Catalogue-1
4/34
CPU Module LM3105 (8CH DI, 6CH DO)
Rated Voltage: 220V AC
8 Channels DC24V DI, 6 Channels Relay DO
Program Memory Capacity: 28KB
Interrupt Input: 2 Points
Expandable I/O: 2 Modules
CPU Features
Local I/O 8 Channels DC24V DI, 6 Channels Relay DO
Expandable I/O 2 modules (unable to connect Ethernet modules)
High-speed counterMonophase counter: 3 points, 100KHz
Biphase counter: 2 points, 100KHz
Pulse output N/A
Pulse catch 2 points
Interrupt input 2 points
Analog potentiometer 2, value setting range 0255
User program memory
capacity28K bytes
Retain area N/A
Input data memory 256 bytes
Output data memory 256 bytes
Mid-variables memory 1K bytes
Global memory 2K bytes
Password Yes
Real-time clock N/A
Timer No limit (1ms as minimum unit)
Counter No limit (Maximum counting range: 16 bit)
Basic instructions 283
Function blocks Over 70
Operation speed 0.65s (Basic instruction)
Power Supply Specifications
Power supply 220V AC@50Hz
Allowed range 187V AC242V AC@50Hz
Current consumption (MAX) 120mA
Output voltage 24V DC
Allowed range 22.8V DC25.2V DC
+24VDC (To expansion bus) 260mA
+24V DC (To the outside) 200mACurrent output
+5V DC (To expansion bus) 800mA
7/30/2019 LM PLC Catalogue-1
5/34
Short circuit protection 400mA, 24VDC output
Communication Features
Communication interface 1 RS-232 (Non-isolating)
Communication protocol Proprietary protocol/MODBUS/Free protocol
Input Features
Input type Sink/Source
Input voltage rated value 24V DC
Allowed range 0V DC30V DC
Logic 1 signal 1530V DC, allowed minimum current 3mA
Logic 0 signal 05V DC, allowed maximum current 1mA
Input delay time
7/30/2019 LM PLC Catalogue-1
6/34
CPU Module LM3104 (8CH DI, 6CH DO)
Rated Voltage: 24V DC
8 Channels DC24V DI, 6 Channels Transistor DO
Program Memory Capacity: 28KB
Interrupt Input: 2 Points
Expandable I/O: 2 Modules
CPU Features
Local I/O 8 Channels DC24V DI, 6 Channels Transistor DO
Expandable I/O 2 modules (unable to connect Ethernet modules)
High-speed counter
Monophase counter: 3 points, 100KHz
Biphase counter: 2 points, 100KHz
Pulse output 1 point 20KHz
Pulse catch 2 points
Interrupt input 2 points
Analog potentiometer 2, value setting range 0255
User program memory
capacity28K bytes
Retain area N/A
Input data memory 256 bytes
Output data memory 256 bytes
Mid-variables memory 1K bytes
Global memory 2K bytes
Password Yes
Real-time clock N/A
Timer No limit (1ms as minimum unit)
Counter No limit (Maximum counting range: 16 bit)
Basic instructions 283
Function blocks Over 70
Operation speed 0.65s (Basic instruction)
Power Supply Specifications
Power supply 24V DC
Allowed range 21V DC27V DC
Current consumption (MAX) 1300mA
Output voltage 24V DC
Allowed range 22.8V DC25.2V DC
1
7/30/2019 LM PLC Catalogue-1
7/34
2
+24VDC (To expansion bus) 300mA
+24V DC (To the outside) 300mACurrent output
+5V DC (To expansion bus) 800mA
Short circuit protection 400mA, 24VDC output
Communication Features
Communication interface 1 RS-232 (Non-isolating)
Communication protocol Proprietary protocol/MODBUS/Free protocol
Input Features
Input type Sink/Source
Input voltage rated value 24V DC
Allowed range 0V DC30V DC
Logic 1 signal 1530V DC, allowed minimum current 3mA
Logic 0 signal 05V DC, allowed maximum current 1mA
Input delay time
7/30/2019 LM PLC Catalogue-1
8/34
CPU Module LM3106A (14CH DI, 10CH DO)
Only for Motion Control
Rated Voltage: 24V DC
14 Channels DC24V DI, 10 Channels Transistor DO
Pulse output: 4 points, 2 can be PWM (100KHz) or
PTO (50KHz), 2 can be direction control
CPU Features
Local I/O 14 Channels DC24V DI, 10 Channels Transistor DO
Expandable I/O 4 modules
High-speed counter
Monophase counter: 3 points, 100KHz
Biphase counter: 2 points, 100KHz
Pulse output4 points (2 can be PWM (100KHz) or PTO (50KHz);
2 can be direction control)
Pulse catch 3 points
Interrupt input 3 points
Analog potentiometer 2, value setting range 0255
User program memory
capacity28K bytes/120K bytes
Retain area 512 bytes/6K bytes
Password Yes
Real-time clock Built-in
Timer No limit (1ms as minimum unit)
Counter No limit (Maximum counting range: 16 bit)
Basic instructions 283
Function blocks Over 70
Operation speed 0.65s (Basic instruction)
Power Supply Specifications
Power supply 24V DC
Allowed range 21V DC27V DC
Current consumption (MAX) 1300mA
Output voltage 24V DC
Allowed range 22.8V DC25.2V DC
+24VDC (To expansion bus) 300mA
+24V DC (To the outside) 300mACurrent output
+5V DC (To expansion bus) 800mA
Short circuit protection 400mA, 24VDC output
7/30/2019 LM PLC Catalogue-1
9/34
Communication Features
Communication interface 1 RS-232 (Non-isolating)
Communication protocol Proprietary protocol/MODBUS/Free protocol
Input Features
Input type Sink/Source
Input voltage rated value 24V DC
Allowed range 0V DC30V DC
Logic 1 signal 1530V DC, allowed minimum current 3mA
Logic 0 signal 05V DC, allowed maximum current 1mA
Input delay time
7/30/2019 LM PLC Catalogue-1
10/34
CPU Module LM3107 (14CH DI, 10CH DO)
Rated Voltage: 220V AC
14 Channels DC24V DI, 10 Channels Relay DO
Program Memory Capacity: 28KB/120KB
Interrupt Input: 3 Points
Expandable I/O: 4 Modules
CPU Features
Local I/O 14 Channels DC24V DI, 10 Channels Relay DO
Expandable I/O 4 modules
High-speed counterMonophase counter: 3 points, 100KHz
Biphase counter: 2 points, 100KHz
Pulse output N/A
Pulse catch 3 points
Interrupt input 3 points
Analog potentiometer 2, value setting range 0255
User program memory
capacity28K bytes/120K bytes
Retain area 512 bytes/6K bytes
Input data memory 512 bytes
Output data memory 512 bytes
Mid-variables memory 8K bytes
Global memory 24K bytes
Password Yes
Real-time clock Built-in
Timer No limit (1ms as minimum unit)
Counter No limit (Maximum counting range: 16 bit)
Basic instructions 283
Function blocks Over 70
Operation speed 0.65s (Basic instruction)
Power Supply Specifications
Power supply 220V AC@50Hz
Allowed range 187V AC242V AC@50Hz
Current consumption (MAX) 120mA
Output voltage 24V DC
Allowed range 22.8V DC25.2V DC
+24VDC (To expansion bus) 260mACurrent output
+24V DC (To the outside) 200mA
7/30/2019 LM PLC Catalogue-1
11/34
+5V DC (To expansion bus) 800mA
Short circuit protection 400mA, 24VDC output
Communication Features
Communication interface 1 RS-232 (Non-isolating)
Communication protocol Proprietary protocol/MODBUS/Free protocol
Input Features
Input type Sink/Source
Input voltage rated value 24V DC
Allowed range 0V DC30V DC
Logic 1 signal 1530V DC, allowed minimum current 3mA
Logic 0 signal 05V DC, allowed maximum current 1mA
Input delay time
7/30/2019 LM PLC Catalogue-1
12/34
CPU Module LM3108 (24CH DI, 16CH DO)
Rated Voltage: 24V DC
24 Channels DC24V DI, 16 Channels Transistor DO
Program Memory Capacity: 120KB
Interrupt Input: 3 Points
Expandable I/O: 7 Modules
CPU Features
Local I/O 24 Channels DC24V DI, 16 Channels Transistor DO
Expandable I/O 7 modules
High-speed counterMonophase counter: 3 points, 100KHz
Biphase counter: 2 points, 100KHz
Pulse output 2 point 20KHz
Pulse catch 3 points
Interrupt input 3 points
Analog potentiometer 2, value setting range 0255
User program memory
capacity120K bytes
Retain area 6K bytes
Input data memory 512 bytes
Output data memory 512 bytes
Mid-variables memory 8K bytes
Global memory 24K bytes
Password Yes
Real-time clock Built-in
Timer No limit (1ms as minimum unit)
Counter No limit (Maximum counting range: 16 bit)
Basic instructions 283
Function blocks Over 70
Operation speed 0.65s (Basic instruction)
Power Supply Specifications
Power supply 24V DC
Allowed range 21V DC27V DC
Current consumption (MAX) 1500mA
Output voltage 24V DC
Allowed range 22.8V DC25.2V DC
7/30/2019 LM PLC Catalogue-1
13/34
+24VDC (To expansion bus) 400mA
+24V DC (To the outside) 400mACurrent output
+5V DC (To expansion bus) 1500mA
Short circuit protection 900mA, 24VDC output
Communication Features
Communication interface 2 (RS-232 and RS-485) (Non-isolating)
Communication protocol Proprietary protocol/MODBUS/Free protocol
Input Features
Input type Sink/Source
Input voltage rated value 24V DC
Allowed range 0V DC30V DC
Logic 1 signal 1530V DC
Logic 0 signal 05V DC
Input delay time
7/30/2019 LM PLC Catalogue-1
14/34
CPU Module LM3109 (24CH DI, 16CH DO)
Rated Voltage: 220V AC
24 Channels DC24V DI, 16 Channels Relay DO
Program Memory Capacity: 120KB
Interrupt Input: 3 Points
Expandable I/O: 7 Modules
CPU Features
Local I/O 24 Channels DC24V DI, 16 Channels Relay DO
Expandable I/O 7 modules
High-speed counterMonophase counter: 3 points, 100KHz
Biphase counter: 2 points, 100KHz
Pulse output N/A
Pulse catch 3 points
Interrupt input 3 points
Analog potentiometer 2, value setting range 0255
User program memory
capacity120K bytes
Retain area 6K bytes
Input data memory 512 bytes
Output data memory 512 bytes
Mid-variables memory 8K bytes
Global memory 24K bytes
Password Yes
Real-time clock Built-in
Timer No limit (1ms as minimum unit)
Counter No limit (Maximum counting range: 16 bit)
Basic instructions 283
Function blocks Over 70
Operation speed 0.65s (Basic instruction)
Power Supply Specifications
Power supply 220V AC@50Hz
Allowed range 187V AC242V AC@50Hz
Current consumption (MAX) 200mA
Output voltage 24V DC
Allowed range 22.8V DC25.2V DC
+24VDC (To expansion bus) 320mA
+24V DC (To the outside) 400mACurrent output
+5V DC (To expansion bus) 1300mA
7/30/2019 LM PLC Catalogue-1
15/34
Short circuit protection 900mA, 24VDC output
Communication Features
Communication interface 2 (RS-232 and RS-485) (Non-isolating)
Communication protocol Proprietary protocol/MODBUS/Free protocol
Input Features
Input type Sink/Source
Input voltage rated value 24V DC
Allowed range 0V DC30V DC
Logic 1 signal 1530V DC, allowed minimum current 3mA
Logic 0 signal 05V DC, allowed maximum current 1mA
Input delay time
7/30/2019 LM PLC Catalogue-1
16/34
DI Module LM3211 (8CH DI)
Input channel: 8
Rated Voltage: 220V AC
Input Features
Input channel 8
Input voltage rated value 220V AC
Allowed range 164V AC264V AC (50/60Hz)
Logic 1 signal (Minimum) 164V AC
Logic 0 signal (Maximum) 80V AC
Input delay time
7/30/2019 LM PLC Catalogue-1
17/34
DI Module LM3212 (16CH DI)
Input channel: 16
Rated Voltage: 24V DC
Input Features
Input channel 16
Input type Sink/Source
Input voltage rated value 24V DC
Allowed range 0V DC30V DC
Logic 1 signal 1530V DC, allowed minimum current 3mA
Logic 0 signal 05V DC, allowed maximum current 1mA
Input delay time
7/30/2019 LM PLC Catalogue-1
18/34
DO Module LM3220 (8CH DO)
Input channel: 8
Rated Voltage: 24V DC
Output Features
Output Channel 8
Output type Transistor
Output voltage 24V DC
Allowed range 20.4V DC28.8V DC
Transistor conduction voltage drop
7/30/2019 LM PLC Catalogue-1
19/34
DO Module LM3221 (16CH DO)
Input channel: 16
Rated Voltage: 24V DC
Output Features
Output Channel 16
Output type Transistor
Output voltage 24V DC
Allowed range 20.4V DC28.8V DC
Transistor conduction voltage drop
7/30/2019 LM PLC Catalogue-1
20/34
DO Module LM3222 (8CH DO)
Input channel: 8
Rated Voltage: 24V DC or 220V AC
Output Features
Output Channel 8
Output type Relay
Output voltage 24V DC or 24 V AC 230V AC
Allowed range 5V DC30V DC or 5V AC250V AC
Common end output current total
7/30/2019 LM PLC Catalogue-1
21/34
DI Module LM3210 (8CH DI)
Input channel: 8
Rated Voltage: 24V DC
Input Features
Input channel 8
Input type Sink/Source
Input voltage rated value 24V DC
Allowed range 0V DC30V DC
Logic 1 signal 1530V DC, allowed minimum current 3mA
Logic 0 signal 05V DC, allowed maximum current 1mA
Input delay time
7/30/2019 LM PLC Catalogue-1
22/34
DO Module LM3223 (16CH DO)
Input channel: 16
Rated Voltage: 24V DC or 220V AC
Output Features
Output Channel 16
Output type Relay
Output voltage 24V DC or 24 V AC 230V AC
Allowed range 5V DC30V DC or 5V AC250V AC
Common end output current total
7/30/2019 LM PLC Catalogue-1
23/34
DI/DO Module LM3230 (4CH DI, 4CH DO)
Input channel: 4
Output channel: 4
Input Rated Voltage: 24V DC
Output Rated Voltage: 24V DC
Input Features
Input channel 4
Input type Sink/Source
Input voltage rated value 24V DC
Allowed range 0V DC30V DC
Logic 1 signal 1530V DC, allowed minimum current 3mA
Logic 0 signal 05V DC, allowed maximum current 1mA
Input delay time
7/30/2019 LM PLC Catalogue-1
24/34
Physical Features
Dimensions 50mm(L)90mm(W)70mm (H)
Weight
7/30/2019 LM PLC Catalogue-1
25/34
DI/DO Module LM3231 (4CH DI, 4CH DO)
Input channel: 4
Output channel: 4
Input Rated Voltage: 24V DC
Output Rated Voltage: 24V DC or 220V AC
Input Features
Input channel 4
Input type Sink/Source
Input voltage rated value 24V DC
Allowed range 0V DC30V DC
Logic 1 signal 1530V DC, allowed minimum current 3mA
Logic 0 signal 05V DC, allowed maximum current 1mA
Input delay time
7/30/2019 LM PLC Catalogue-1
26/34
Physical Features
Dimensions 50mm(L)90mm(W)70mm (H)
Weight
7/30/2019 LM PLC Catalogue-1
27/34
AI Module LM3310 (4CH Analog Input)
Input channel: 4
Input precision: 0.5% full range, at 25
Sampling refresh time (every 4 channels): 6ms
Input Features
Input channel 4
Voltage 010V
Current 020mAInput Ranges
Current 420mA
Input precision (monopole) 0.5% full range, at 25
Input impedance >1M (Voltage), 500 (Current)
Maximum input current
7/30/2019 LM PLC Catalogue-1
28/34
AI Module LM3311 (4CH Thermal Couple Input)
Input channel: 4
Input precision: 0.1% full range, at 25
Sampling refresh time (every 4 channels): 450ms
Temperature resolution: 0.1
Input Features
Input channel 4
Input signal J, K, T, N, E, R, S, B type thermocouple,-8080mV
Input precision 0.1% full range, at 25
Temperature resolution 0.1
Cold end error 1.5
Input impedance >1M
NMMRR Better than 60dB@50Hz
CMMRR Better than 80dB@50Hz
CM voltage Not more than 60VChannel maximum voltage resisting 30VDC
Temperature drift 100ppm/
Isolation modeIsolation between input and internal
circuit, no isolation between channels
Maximum Isolation Voltage 1500VAC
Sampling refresh time 500ms (every 4 channels)
Physical Features
Dimensions 75mm(L)90mm(W)70mm (H)
Weight
7/30/2019 LM PLC Catalogue-1
29/34
AI Module LM3312 (4CH RTD Input)
Input channel: 4
Input precision: 1, at 25
Sampling refresh time (every 4 channels): 450ms
Input Features
Input channel 4
Input type Cu50, Pt100
Cu50 (-50-140.1)
Cu50 (-50-150)
Pt100 (-150-157.2)Input Ranges
Pt100 (-150-619.6)
Input precision (monopole) 1, at 25
Temperature drift 100ppm/
Isolation modeIsolation between input and internal circuit,
no isolation between channels
Maximum Isolation Voltage 1500VAC@ (5060Hz)
NMMRR Better than 60dB@50HZ
CMMRR (50Hz, AC 250Vrms) Better than 80dB
Sampling refresh time 450ms (every 4 channels)
Physical Features
Dimensions 75mm(L)90mm(W)70mm (H)
Weight
7/30/2019 LM PLC Catalogue-1
30/34
AI Module LM3313 (8CH Analog Input)
Input channel: 8
Input precision: 0.5% full range, at 25
Sampling refresh time (every 8 channels): 1M (Voltage), 500 (Current)
Maximum input current
7/30/2019 LM PLC Catalogue-1
31/34
AI Module LM3314 (8CH NTC Input)
Input channel: 8
Input precision: 0.2% full range, at 25
Sampling refresh time (every 8 channels): 1s
Input Features
Input channel 8NTC type R =10K at 25; B optional
Input precision 0.2% full range, at 25
Temperature resolution 0.1
Temperature drift 100ppm/
Isolation modeIsolation between input and internal circuit,
no isolation between channels
Maximum Isolation Voltage 1500VAC
NMMRR Better than 60dB@50HZ
CMMRR (50Hz, AC 50Vrms) Better than 80dB
Sampling refresh time 1s (every 8 channels)
Physical Features
Dimensions 75mm(L)90mm(W)70mm (H)
Weight
7/30/2019 LM PLC Catalogue-1
32/34
AO Module LM3320 (2CH Analog Output)
Output channel: 2
Output precision: 2% full range (055)
Typical precision: 0.5% full range, at 25
Output Features
Output channel 2
Voltage 010VOutput range
Current 020mA
Precision (055) 2% full range
Typical precision 0.5% full range, at 25
Voltage output
7/30/2019 LM PLC Catalogue-1
33/34
Profibus-DP Slave Station Module LM3401
Communication Functions
No. of communication port 1
Interface type RS - 485
Maximum Isolation Voltage 1500VAC
PROFIBUS-DP baud rate
9.6, 19.2, 45.45, 93.75, 187.5, 500
kbps and 1, 1.5, 3, 6, 12Mbps
(auto setting)
Station address setup 0126 (set by switch)
Maximum No. of stations for each section 32
Maximum No. of stations for each network 126
Isolation mode Photocoupler isolation
Physical Features
Dimensions 75mm(L)90mm(W)70mm (H)
Weight
7/30/2019 LM PLC Catalogue-1
34/34
Ethernet Module LM3403
Communication Functions
No. of communication port1 (communicating with only one MODBUS/TCP
master station at the same time)
Interface type Ethernet (RJ 45)
Protocol type MODBUS/TCP slave station
Items required for
configuration
IP address (default value as 172.20.45.160), subnet
mask, gateway IP, read/write data length
(Note: MAC_Address does not require configuration)
Baud rate Baud rate
Input/output area capacity Maximum 200 bytes each
Maximum No. of stations
for each networkDepending on configuration software
Physical Features
Dimensions 75mm(L)90mm(W)70mm (H)
Weight
Recommended