View
219
Download
0
Category
Preview:
Citation preview
magris prides itself on nearly fifty years of experience asone of the leader manufacturer of hinged slat chains andaccessories in steel/stainless steel and thermoplastic resinfor conveyor belts used in packaging, bottling, glass,pharmaceutical, chemical, food, mechanical industry, etc.Nowadays, the magris team continues this activityexporting all over the world through a qualified networkof agents and distributors and also a short delivery timeis granted through a warehouse containing large quantitiesof the most required items (up to 1.000 metres each chaintype); non-stock and tailor-made orders can be supplied inshort term.The choice of chain materials has been specifically studiedby skilled specialists and developed in cooperation withthe main stainless steel and thermoplastic manufacturers,as far as the final performance is granted by chain testswhich strictly conform to international regulations, e.g.careful inspections carried out during all the stages ofproduction, whose quality is constantly supported bytechnological researches.magris production range for conveyor belts includes:- Steel/stainless steel hinged slat chains;- Thermoplastic hinged slat chains;- Sprockets and idlers, curves, guide rails profiles,
accessories and components in thermoplastic resin.
24
1011111112121213131414
151617171718
Materials
Chain sizing
Straight running chains - Single hingeSuper - Hard Inox
Straight running chains - Single hingeSuperspeed - HQ Inox
Straight running chains - Single hingeWear-Proof - HQ Inox
Straight running chains - Single hingeStandard - Inox
Straight running chains - Single hingeSpecial - Inox
Straight running chains - Single hinge316 - Inox 316
Straight running chains - Single hingeStella D - Inox 18/8
Straight running chains - Single hingeAccate C - Carbon steel
Straight running chains - Single hingeAccate - Carbon steel
Mignon straight running chains - Single hingeStella D - Inox 18/8
Mignon straight running chains - Single hingeSuper - Hard Inox14Straight running chains - Single hinge 1 InchSuper - Hard Inox
Straight running chains - Double hingeStandard - Inox
Straight running chains - Single reinforced hingeSuper - Hard Inox
Straight running chains - Double hingeStella D - Inox 18/8
Straight running chains - Double hingeSuper - Hard Inox
Straight running chains - Double hingeAccate - Carbon Steel
Mignon straight running chains - Single hingeStandard - Inox
19 Straight running chains - Double reinforced hingeStella D - Inox 18/8
20 Sideflexing hinged slat chainsFlex RXMC - Inox
20212121
2222222323
242425
Sideflexing hinged slat chainsFlex RXMS - Hard Inox
Sideflexing hinged slat chainsFlex RXM - Inox 18/8
Sideflexing hinged slat chainsFlex RXM - Inox 316
Sideflexing hinged slat chainsFlex RXMA - Carbon Steel
Sideflexing hinged slat chainsFlex FMS - Hard Inox
Sideflexing hinged slat chainsFlex FMD - HQ Inox
Sideflexing hinged slat chainsFlex FM - Inox 18/8
Sideflexing hinged slat chainsFlex FMS2 R=190 mm - Hard Inox
Sideflexing hinged slat chainsFlex FM2 R=190 mm - Inox 18/8
Sideflexing hinged slat chains for magnetic systemsNew Flex Mag - Hard Inox
22
24
Sideflexing hinged slat chainsFlex FMC - Inox
Sideflexing hinged slat chains for magnetic systemsNew Flex Mag - Inox
23 Sideflexing hinged slat chainsFlex FMA2 R=190 mm - Carbon steel
Sideflexing hinged slat chains for magnetic systemsNew Flex Mag D - HQ Inox
Sideflexing chains for magnetic systems -Reinforced hingeNew Flex Mag - Hard Inox
26 Straight running chains with rubber insertsfor inclined conveyorsSuper G/DHG - Hard Inox
272829
Sideflexing hinged slat chains with rubberinserts for inclined conveyorsFlex RXMS G/New Flex G Mag - Hard Inox
Block body machined steel sprockets
1864 Straight running plate top chains
30 1874 Sideflexing plate top chains
31 Steel corrosion resistance table
32 Credits
contents
1
materials
2
HARD INOXSpecial workhardened,chrome-nickel, highlywear corrosionresistant stainless steel.It offers excellentmechanicalcharacteristics andexceptional slidingproperties, thanks toa very low surfaceroughness.It is particularlysuitable for the criticalpoints of bottling lines.Material used for thefollowing chain models:Super, Flex RXMS, FlexFMS, Flex FMS2, NewFlex Mag, Super G,Flex RXMS G and NewFlex Mag G.Minimum temperatures:- 40°CMaximum temperatures:+ 260°C (dry env.),+ 120°C (wet env.)
INOXFerritic, AISI 430stainless steel, workhardened bycold-rolling, with goodcorrosion resistance.It has an excellentsurface finishing with alow roughness, that is avery important qualityfor the sliding ofconveyed products.It is the preferred choicefor standard bottlingindustry applications.Material used for thefollowing chain models:Special, Standard andFlex RXMC.Minimum temperatures:- 40°CMaximum temperatures:+ 260°C (dry env.),+ 120°C (wet env.)
HQ INOX (high quality)Special, new,chrome-nickel(W.1.4589) stainlesssteel, work hardened. Ithas been developed incooperation with amajor stainless steelmanufacturer for veryspecial applications suchas pressurelesscombiners/inliners. Coldrolled to extremely highquality standards, thismaterial is the rightanswer to the mostsophisticated needs.Its exceptional surfacefinishing and flatnesstogether with a veryhigh working load andwear resistance areunique features.Material used for thefollowing chain models:Superspeed,Wear-Proof, Flex FMDand New Flex Mag D.Minimum temperatures:- 40°CMaximum temperatures:+ 260°C (dry env.),+ 120°C (wet env.)
INOX 18/8Austenitic, non-magneticAISI 304 stainless steel(18% Chrome – 8%Nickel), work hardenedfor high resistance.It provides excellentresistance to chemicalagents and corrosion,and offers excellentmechanical andduration characteristics.It is mainly used in thepreservation andbottling industry.Approved by Food andDrug Administration(FDA), Americangovernment institute forthe direct contact withfoodstuff.Material used for thefollowing chain models:Stella D, Flex RXM,Flex FM and Flex FM2.Minimum temperatures:- 40°CMaximum temperatures:+ 400°C (dry env.),+ 120°C (wet env.)
INOX 316Austenitic AISI 316Lstainless steel (18%Chrome – 14% Nickel– 3% Molybdenum). Itis ideal with chemicalagents and strong acids.Material used for thefollowing chain models:316 and Flex RXM 316.Minimum temperatures:- 40°C
Maximum temperatures:+ 400°C (dry env.), + 120°C (wet env.)
CARBON STEELHeat-treated carbonsteel with a surface andcore hardness of 43HRC. It is especiallysuitable for high workingloads and it is highlyresistant to wear.It is recommendedfor the glass, ceramicand general productconveying industry.In case of difficultapplications, such aswith abrasive dust, thecarbon steel can be,upon request,case-hardened, thusreaching a surfacehardness of 55 HRC anda core hardness of 40HRC.Material used for thefollowing chain models:Accate, Flex RXMA andFlex FMA2.Minimum temperatures: - 40°CMaximum temperatures:+ 180°C (dry env.), + 120°C (wet env.)
SLATS
3
PINS
STANDARD PINS
AUSTENITIC 18/8 PINS
HB PINS
AISI 316 PINS
XHB PINS
CASE-HARDENED CARBON STEEL PINS
NB.: Upon request, all our chains can be produced with other types of stainless steel.
The following chain models :Special, Standard, Super, Super G,Flex RXMC, Flex RXMS, Flex RXMS G, Flex FMS, Flex FMS2 and New FlexMag, have pins made of AISI 431stainless steel, magnetic and workhardened for high resistance.
The following chain models :Wear Proof, Superspeed, Flex FMDand New Flex Mag D, have pins madeof special martensitic stainless steel,magnetic and heat-treated for high resistance.
- Increased wear resistance- Pins life up to 40% higher
Special hardened pins series XHB areavailable upon request.They offer an additional wearresistance combined with an highercorrosion strength.
- Pins life up to 100% higher
The following chain models:Stella D, Flex RXM, Flex FM, Flex FM2have pins made of austenitic stainlesssteel (18% Chrome - 8% Nickel), workhardened for high resistance.
- Excellent corrosion resistance.
The following chain models:316 and Flex RXM 316, have pins madeof austenitic AISI 316 stainless steel.
- Exceptional corrosion resistance.
The following chain models:Accate, Accate C, Flex RXMA, FlexRXMA C and Flex FMA2, have pinsmade of case-hardened carbon steel .
Every care has been taken to ensure the accuracy of the information contained in this cataloguebut no liability can be accepted for any errors or omissions.
chain sizing
4
FtFoF1, F2, . . .WcWmLL1, L2, . . .HLsL1s , L2s , . . .R
Chain tension at headshaft (N)Chain tension on return track (N)Sum of all loads (N)Chain weight (Kg/m)Conveyed product weight (Kg/m)Horizontal conveyor length (m)Conveyor track length (m)Vertical conveyor elevation (m)Conveyor length of the section where accumulation occurs (m)Conveyor length of the section where accumulation occurs (m)Curve radius (m)
αKTf1
f2
fpS9.81
Bending angle (gradi)Lenght factor table (table D)Curve factor (table D)Friction factor between chainand wear strips (table A)Friction factor between chainand conveyed products (table A)Start up factor (table B)Slippage factor (table C)Gravity acceleration (m/s 2)
According to the maximum allowable working load method.Chain sizing consists of a comparison between the chain tension at headshaft, which a chain is subject to, and the maximumallowable working load of the chain itself. The following formulas allow an evaluation of the chain tension at headshaftas a function of the different load conditions.
SYMBOLS
Lubricationused
Dry*Water
Soapy waterOil
Friction factor between chainand wear strips
Friction factor between chain and conveyed products
0,500,400,200,20
0,200,150,120,08
High densitypolyethylene, nylatronSteel
0,300,250,15
-
0,450,400,200,15
Metal
0,450,400,250,20
Glass ceramic
Cardboard plastic
Chain materials: carbon steel and stainless steelA f1 f2
0510152025
1,01,41,71,81,92,0
Start ups perhour
B Start up factor
fp
010203040
50>
00,50,70,80,91,0
Slippage timepercentage
C Slippage factor
S
Steel wear strips
1530456090120150180
0,250,520,791,051,572,092,623,14
1,201,301,401,602,002,503,103,50
Bendingangle
degrees α
Curve factor Stainless steel chain
D K T
1,051,101,201,301,501,701,902,10
1,101,201,301,501,802,202,703,00
High density polyethyleneand nylatron wear strips
1,051,101,201,251,351,501,751,90
Lengthfactor
Dry* Lubricated Lubricated Dry*
* Although the theoretical calculation is carried out in dry running conditions,we recommend the use of lubricated chains in order to avoid chain blocking and friction.
5
CONVEYORS WITH SIDEFLEXING CHAINS
In this case the calculation of the chain tension at headshaft is carried out as the sum of successive loads (draw. 1):L2 = K(α2) x R2L4 = K(α4) x R4
1 - Return runthe evaluation of the chain tension in the return run is carriedout by starting at the driven sprockets following the movementof the chain itself up to the return sprocket (draw 2):
Track FETrack FDTrack FCTrack FBTrack FA
Written in a more explicit manner:F0 = {[( L5+L4 ) x Wc x f1 xT(α4)+(L3+L2) x Wc x f1] x T(α2)
+ L1 x Wc x f1} x fp x 9,81
2 - Drive run• Chain tension at headshaft without accumulation •The evaluation of the chain tension in the conveying run iscarried out by starting from the return sprocket following themovement of the chain itself up to the drive sprocket (draw. 3):
Track ABTrack ACTrack ADTrack AETrack AF
• Chain tension at headshaft with accumulation •The component of the chain tension at headshaft dueto the accumulation of material conveyed is evaluatedby starting from the return sprocket towards the drive sprocket,for the only track involved by the accumulation (draw. 3).In this case the total chain tension at headshaft is given by thesum of the component without accumulation plus the one dueto the accumulation of the material:
Track ABTrack ACTrack ADTrack AETrack AF
F5 = Wc x L5 x f1F4 = [F5 + Wc x L4 x f1 ] xT(α4 )F3 = F4 + Wc x L3 x f1F2 = [F3 + Wc x L2 x f1] xT(α2)F1 = F2 + Wc x L1 x f1F0 = F1 x fp x 9,81
F1 = F0 + (Wc + Wm) x L1 x f1+ fp x 9,81F2 = [F1+ (Wc+Wm) x L2 x f1+ fp x 9,81] x T(α2)F3 = F2 + (Wc+Wm) x L3 x f1+ fp x 9,81F4 = [F3 + (Wc+Wm) x L4 x f1+ fp x 9,81] x T(α4)F5 = F4 + (Wc+Wm) x L5 x f1+ fp x 9,81
F1 = F0 + [(Wc+Wm) x L1 x f1 x fp+L1s x Wm x f2 x S] x 9,81F2 = {F1+[(Wc+Wm) x L2 x f1 x fp + L2s x Wm x f2 x S] x 9,81} x T(α2)F3 = F2+[ (Wc+Wm) x L3 x f1 x fp+L3s x Wm x f2 xS] x 9,81F4 = {F3+[(Wc+Wm) x L4 x f1x fp + L4s x Wm x f2 x S] x 9,81} x T(α4)F5 = F4+[ (Wc+Wm) x L5 x f1 x fp + L5s x Wm x f2 xS] x 9,81
6
Horizontal conveyor
Without accumulationFt = (2Wc + Wm) x L x f1 x fp x 9,81With accumulationFt = [(2Wc + Wm) x L x f1 x fp +Ls x Wm x f2 x S] x 9,81
Inclined conveyor
Without accumulationFt = [(2Wc + Wm) x L x f1 x f p +(Wc + Wm) x H] x 9,81With accumulationFt = [(2Wc + Wm) x L x f1 x f p +(Wc + Wm) x H + Ls x Wm x f2 x S] x 9,81
CONVEYORS WITH STRAIGHT RUNNING CHAINS
1864. . . .7.24.0007.94.0007.14.000S.7.04.000SG.7.04.0007.04.000C.7.90.0007.90.0007.25.0007.10.000DX.7.00.000D.7.00.000S.7.00.175S.7.00.000SG.7.00.175SG.7.00.0007.00.000H.7.00.000S.9.00.0007.10.0107.00.0108.25.000SG.8.25.000
Plate top chainDouble reinforced hinged slat chain - Stella D Mod.Double hinged slat chain - Accate Mod. Double hinged slat chain - Stella D Mod. Double hinged slat chain - Super Mod. Double hinged slat chain - Super DHG Mod. Double hinged slat chain - Standard Mod. Single hinged slat chain - Accate C Mod. Single hinged slat chain - Accate Mod. Single hinged slat chain - 316 Mod.Single hinged slat chain - Stella D Mod.Single hinged slat chain - Superspeed Mod.Single hinged slat chain - Wear Proof Mod.Single reinforced hinged slat chain - Super Mod.Single hinged slat chain - Super Mod.Single reinforced hinged slat chain - Super G Mod.Single hinged slat chain - Super G Mod.Single hinged slat chain - Standard Mod.Single hinged slat chain - Special Mod.Single hinged slat chain - 1 Inch Mod.Mignon hinged slat chain - Stella D Mod.Mignon hinged slat chain - Standard Mod.Mignon hinged slat chain - Super Mod.Mignon hinged slat chain - Super G Mod.
SYMBOLS FOR STRAIGHT RUNNING CHAINS
7
FP =
x vt6 x10 4Calculation of Power (P)
where: (P) = Power (kW) , Ft = Chain tension at headshaft on the chain (N), v = Speed (m/min)
Having evaluated the chain tension at headshaft which the chain is subject to, and calculated the speed/length of the conveyor ratio, the two values are stated in figure 4. The chain suitable for the use in question is the one whosecurve is immediately above the intersection of the two values.
CHAIN SELECTION
Cha
inte
nsio
nat
head
shaf
ts(N
)
F tC
hain
tens
ion
athe
adsh
afts
(N)
=
F t=
Ratio =Speed (m/min) Length(m)
Ratio =Speed (m/min) Length(m)
Straight running chainsallowableworking load diagram
Sideflexing chains allowableworking load diagram
9000
7000
6500
5500
4500
3600
2700
2300
79421001800
1600
1400
1100
900
700
5000,2 0,3 0,4 0,5 0,7 0,9 1 2 3 4 5 6 7 8910 15
724
714 S704 SG704704
790 C790
710 S700 SG700 DX700 D700H700 700 S900
725710.010 700.010
6500
5500
4500
3600
2700
230021001800
1600
1400
1100
900
700
5000,2 0,3 0,4 0,5 0,7 0,9 1 2 3 4 5 6 7 8 910 15
893 C893
813 816 D826 S823 SG823 S826 899 - S708 D708 SG708S829 819823 826 708833
825 SG825
S.7.00.175 - SG.7.00.175 - 1864.SS
S.7.08.175 - SG.7.08.175 - 1874.CC - 1874.CS
1864.CC - 1864.CS1874.SS
4
1874. . . .C.8.93.0008.99.0008.93.0008.33.0008.13.0008.16.0008.19.000D.8.26.000S.8.23.000SG.8.23.000S.8.26.000S.8.29.0008.26.0008.23.000D.7.08.000S.7.08.175S.7.08.0007.08.000SG.7.08.175SG.7.08.000
Plate top chainHinged slat chain - Flex RXMA C Mod. Hinged slat chain - Flex FMA2 Mod.Hinged slat chain - Flex RXMA Mod. Hinged slat chain - Flex RXM 316 Mod.Hinged slat chain - Flex RXM Mod.Hinged slat chain - Flex FM Mod.Hinged slat chain - Flex FM2 Mod. Hinged slat chain - Flex FMD Mod.Hinged slat chain - Flex RXMS Mod.Hinged slat chain - Flex RXMS G Mod.Hinged slat chain - Flex FMS Mod. Hinged slat chain - Flex FMS2 Mod. Hinged slat chain - Flex FMC Mod. Hinged slat chain - Flex RXMC Mod. Hinged slat chain - New Flex Mag D Mod. Reinforced hinged slat chain - New Flex Mag Mod. Hinged slat chain - New Flex Mag Mod. Hinged slat chain - New Flex Mag C Mod. Reinforced hinged slat chain - New Flex Mag G Mod. Hinged slat chain - New Flex Mag G Mod.
SYMBOLS FOR SIDEFLEXING CHAINS
8
The 7.10.040 chain, dry-operating, conveys glass wine bottles. The bottles weigh 1,5 Kg each and they are placedon the chain at 20 cm intervals (5 bottles per metre). The chain stops and restarts 10 times per hour.There is accumulation of the 20% operating time and on a length of 8 metres.
Aims:• Chain checking;
Start up data:•Speed (v) = 45 m/min.•Start up factor (fp) = 1,7 (table B)•Slippage time percentage = 20%•Slippage factor (S) = 0,7 (table C)
Calculation of the chain tension at Headshaft (Ft)Ft = [(2Wc + Wm) x L x f1 x fp + Ls x Wm x f2 x S] x 9,81
= [(2 x 2,6 + 7,5) x 12 x 0,20 x 1,7 + 8 x 7,5 x 0,45 x 0,7] x 9,81= 693,72 N
Calculation of the Speed/Length ratio (v/ L)v/ L = 45/ 12 = 3,75 m/min/m
The “allowable working load” diagram shows that the maximum chain tension at headshaft available for that chain and for thatspeed ratio is 1300 N. The selected chain is therefore suitable for our purpose.
Calculation of Power (P)
• Calculation of the power needed by the shaft.
•Length with accumulation (Ls) = 8 m•Friction factor (f2) = 0,45 (table A: chain-glass bottle)•Conveyor length (L) = 12 m
•Chain weight (Wc) = 2,6 Kg/m•Conveyed product weight (Wm) = 7,5 Kg/m•Friction factor (f1) = 0,20 (table A: chain-polyethylene wear strip)
EXAMPLE
FP = t
6 x10 4 6 x10 4
x v 693.72 x 45 = = 0.520kW
Straight running chains - Single hinge
SUPER - HARD INOX• Special, chrome-nickel, stainless steel slats, work hardened for high resistance,
with shiny surface having a roughness of Ra ≤ 0,3 micron.• AISI 431 stainless steel pins, magnetic and work hardened for high resistance.
D 820 - K 250 internal code 6.00.020SSHR 812 K213* internal code S.7.00.013SSHR 812 K250 internal code S.7.00.020SSHR 812 K325 internal code S.7.00.040SSHR 812 K335 internal code S.7.00.050SSHR 812 K500* internal code S.7.00.090
PRODUCT CODES
D 820 - K 250 internal code 6.00.020SSH 812 K225 internal code S.7.00.015
SSH 812 K263 internal code S.7.00.025SSH 812 K275 internal code S.7.00.200
SSH 812 K250 internal code S.7.00.021
SSH 812 K300 internal code S.7.00.031SSH 812 K325 internal code S.7.00.041
PRODUCT CODES
SSHR 812 K213*SSHR 812 K250SSHR 812 K325SSHR 812 K335SSHR 812 K500*
54.1 -63.5 21/2
82.5 31/4
85.0 -127.0 5
2.82.82.8 75
7575
2.8 752.8 75
2.102.202.602.683.50
* Size produced only upon request - delivery conditions and terms to beagreed. Standard shipping lengths: 80 pitches = 10 feet = 3,048 metres.
CHARACTERISTICSSlat width(mm/ ")
GP(mm)
RCC(mm)
Weightkg/m
3030
SSH 812 K263 66.7 25/8 1.6 150 2.33 30303030
Hardness(HRC)
SSH 812 K330 internal code S.7.00.042SSH 812 K350 internal code S.7.00.061SSH 812 K400 internal code S.7.00.070SSH 812 K450 internal code S.7.00.080SSH 812 K600 internal code S.7.00.100SSH 812 K750 internal code S.7.00.110
SSH 812 K225SSH 812 K250
SSH 812 K275SSH 812 K300SSH 812 K325
57.1 21/4
63.5 21/2
69.9 23/4
76.2 382.5 31/4 1.6
1.61.6
1.61.6 150
150
150150150
2.182.25
2.352.502.65
CHARACTERISTICSSlat width (mm/ ")
GP(mm)
RCC(mm)
Weightkg/m
3030
303030
Hardness(HRC)
SSH 812 K330SSH 812 K350SSH 812 K400SSH 812 K450
83.8 319/64
88.9 31/2
101.6 4114.3 41/2
1.6 1501.6 1501.6 1501.6 150
2.702.753.003.30
30303030
SSH 812 K600SSH 812 K750
152.4 6190.5 71/2
1.6 1501.6 150
4.205.10
3030
HB OR XHB PINSUPON REQUEST REDUCED PLATE GAP (1.6)
11
STANDARD - INOX• Ferritic, AISI 430 stainless steel slats, work hardened, with shiny surface having low roughness.• AISI 431 stainless steel pins, magnetic and work hardened for high resistance.
SSR 812 K213* internal code 7.00.013SSR 812 K250 internal code 7.00.020SSR 812 K325 internal code 7.00.040SSR 812 K335 internal code 7.00.050
SS 812 K225 internal code 7.00.015SS 812 K250 internal code 7.00.021
SS 812 K275 internal code 7.00.200SS 812 K300 internal code 7.00.031
SS 812 K263 internal code 7.00.025
SSR 812 K213*SSR 812 K250SSR 812 K325SSR 812 K335
54.1 -63.5 21/2
82.5 31/4
85.0 -2.82.82.8 75
7575
2.8 75
2.102.202.602.68
* Size produced only upon request - delivery conditions and terms to beagreed. Standard shipping lengths: 80 pitches = 10 feet = 3,048 metres.
CHARACTERISTICSSlat width(mm/ ")
GP(mm)
RCC(mm)
Weightkg/m
20202020
Hardness(HRC)
SUPERSPEED - HQ INOX• Special, new stainless steel, chrome-nickel (W.1.4589) slats, work hardened for high resistance with very little roughness, Ra ≤ 0.18 micron.• Special martensitic stainless steel pins HB series, magnetic and heat-treated for high resistance.
The chain is produced with a special profile: thanks to its perfect levelness and shiny surface, it is particularly suitable for pressureless combiners/inliners and for high speed systems.
SSX 812 K325 internal code DX.7.00.041
SSX 812 K325 82.5 31/4 1.6 150 2.60
CHARACTERISTICSSlat width (mm/ ")
GP(mm)
RCC(mm)
Weightkg/m
30
Hardness(HRC)
WEAR PROOF - HQ INOX• Special, new stainless steel, chrome-nickel (W.1.4589) slats, work hardened for high resistance with very little surface roughness, Ra ≤ 0.2 micron.• Special martensitic stainless steel pins HB series, magnetic and heat-treated for high resistance.
SSHQR 812 K325 internal code D.7.00.040PRODUCT CODES
SSHQR 812 K325 82.5 31/4 2.8 75 2.60Standard shipping lengths: 80 pitches = 10 feet = 3,048 metres.
CHARACTERISTICSSlat width(mm/ ")
GP(mm)
RCC(mm)
Weightkg/m
30
Hardness(HRC)
SSX 812 K330 83.8 319/64 1.6 150 2.70Standard shipping lengths: 80 pitches = 10 feet = 3,048 metres.
30
SSX 812 K330 internal code DX.7.00.042
PRODUCT CODES
SSHQ 812 K325 internal code D.7.00.041
SSHQ 812 K325 82.5 31/4 1.6 150 2.65
CHARACTERISTICSSlat width(mm/ ")
GP(mm)
RCC(mm)
Weightkg/m
30
Hardness(HRC)
SSHQ 812 K330 83.8 319/64 1.6 150 2.7530
SSHQ 812 K330 internal code D.7.00.042
PRODUCT CODES
PRODUCT CODES PRODUCT CODES
SS 812 K325 internal code 7.00.041SS 812 K330 internal code 7.00.042SS 812 K350 internal code 7.00.061SS 812 K400 internal code 7.00.070SS 812 K450 internal code 7.00.080SS 812 K600 internal code 7.00.100SS 812 K750 internal code 7.00.110
SS 812 K225SS 812 K250
SS 812 K275SS 812 K300SS 812 K325
57.1 21/4
63.5 21/2
69.9 23/4
76.2 382.5 31/4 1.6
1.61.6
1.61.6 150
150
150150150
2.182.25
2.352.502.65
CHARACTERISTICSSlat width(mm/ ")
GP(mm)
RCC(mm)
Weightkg/m
2020
202020
Hardness(HRC)
SS 812 K330 83.8 319/64 1.6 150 2.7020SS 812 K350SS 812 K400SS 812 K450
88.9 31/2
101.6 4114.3 41/2
1.6 1501.6 1501.6 150
2.753.003.30
202020
SS 812 K600SS 812 K750
152.4 6190.5 71/2
1.6 1501.6 150
4.205.10
2020
SS 812 K263 66.7 25/8 1.6 150 2.33 20
REDUCED PLATE GAP (1.6)
REDUCED PLATE GAP (1.6)
REDUCED PLATE GAP (1.6)
XHB PINSUPON REQUEST
XHB PINSUPON REQUEST
STELLA D - INOX 18/8• Chrome-nickel, austenitic AISI 304 stainless steel slats (18% Chrome - 8% Nickel), work hardened for HR - shiny - with a roughness of Ra < 0.5 micron.• Austenitic stainless steel pins (18% Chrome - 8% Nickel), work hardened for high resistance.
SSAR 815 K213* internal code 7.10.013 SSAR 815 K250 internal code 7.10.020SSAR 815 K325 internal code 7.10.040SSAR 815 K335* internal code 7.10.050SSAR 815 K500 internal code 7.10.090
SSA 815 K225 internal code 7.10.015SSA 815 K250 internal code 7.10.021
SSA 815 K275 internal code 7.10.200SSA 815 K300 internal code 7.10.031SSA 815 K325 internal code 7.10.041SSA 815 K350 internal code 7.10.061SSA 815 K400 internal code 7.10.070SSA 815 K450 internal code 7.10.080
SSA 815 K263 internal code 7.10.025
SSA 815 K600 internal code 7.10.100SSA 815 K750 internal code 7.10.110
SSAR 815 K213*SSAR 815 K250SSAR 815 K325 SSAR 815 K335* SSAR 815 K500
54.1 -63.5 21/2
82.5 31/4
85.0 -127.0 5
2.82.82.8 75
7575
2.8 752.8 75
2.102.202.602.683.50
* Size produced only upon request - delivery conditions and terms to beagreed. Standard shipping lengths: 80 pitches = 10 feet = 3,048 metres.
CHARACTERISTICSSlat width(mm/ ")
GP(mm)
RCC(mm)
Weightkg/m
2626
SSA 815 K263 66.7 25/8 1.6 150 2.33 26262626
Hardness(HRC)
SSA 815 K225SSA 815 K250
SSA 815 K275SSA 815 K300 SSA 815 K325 SSA 815 K350SSA 815 K400SSA 815 K450
57.1 21/4
63.5 21/2
69.9 23/4
76.2 382.5 31/4
88.9 31/2
101.6 4114.3 41/2
1.61.61.6
1.61.6 150
150
150150150
1.6 1501.6 1501.6 150
2.182.25
2.352.502.652.753.003.30
CHARACTERISTICSSlat width(mm/ ")
GP(mm)
RCC(mm)
Weightkg/m
2626
262626262626
Hardness(HRC)
SSA 815 K600SSA 815 K750
152.4 6190.5 71/2
1.6 1501.6 150
4.205.10
2626
SPECIAL - INOX• Ferritic, AISI 430 stainless steel slats, work hardened, with shiny surface having low roughness.• AISI 431 stainless steel pins, magnetic and work hardened for high resistance.
SSR 812 K325 internal code H.7.00.040
SSR 812 K325 82.5 31/4 2.8 75 2.55Standard shipping lengths: 80 pitches = 10 feet = 3,048 metres.
CHARACTERISTICSSlat width (mm/ ")
GP(mm)
RCC(mm)
Weightkg/m
20
Hardness(HRC)
316 - INOX 316• Chrome-nickel, austenitic AISI 316L stainless steel slats (18% Chrome - 14% Nickel - 3% Molybdenum).• Austenitic AISI 316 stainless steel pins.
SSAA 815 K325* internal code 7.25.041 SSAA 815 K450* internal code 7.25.080SSAA 815 K600* internal code 7.25.100SSAA 815 K750* internal code 7.25.110
SSAA 815 K325*SSAA 815 K450*SSAA 815 K600* SSAA 815 K750*
82.5 31/4
114.3 41/2
152.4 6190.5 71/2 1.6
1.61.61.6 150
150150150
2.653.304.205.10
* Size produced only upon request - delivery conditions and terms to beagreed. Standard shipping lengths: 80 pitches = 10 feet = 3,048 metres.
CHARACTERISTICSSlat width(mm/ ")
GP(mm)
RCC(mm)
Weightkg/m
----
Hardness(HRC)
PRODUCT CODES
PRODUCT CODES
PRODUCT CODES PRODUCT CODES
REDUCED PLATE GAP (1.6)
REDUCED PLATE GAP (1.6)
13
ACCATE - CARBON STEEL• Heat-treated carbon steel slats.• Case-hardened carbon steel pins.
SR 815 K250 internal code 7.90.020SR 815 K325 internal code 7.90.040SR 815 K500 internal code 7.90.090
S 815 K225 internal code 7.90.015S 815 K250 internal code 7.90.021
S 815 K300 internal code 7.90.031S 815 K325 internal code 7.90.041
S 815 K263* internal code 7.90.025
SR 815 K250SR 815 K325SR 815 K500
63.5 21/2
82.5 31/4
127.0 52.82.8 75
752.8 75
2.202.603.50
* Size produced only upon request - delivery conditions and terms to beagreed. Standard shipping lengths: 80 pitches = 10 feet = 3,048 metres.
CHARACTERISTICSSlat width(mm/ ")
GP(mm)
RCC(mm)
Weightkg/m
43
S 815 K263* 66.7 25/8 1.6 150 2.33434343
Hardness(HRC)
ACCATE C - CARBON STEEL• Case-hardened carbon steel slats and pins.
SCR 815 K325* internal code C.7.90.040
SCR 815 K325* 82.5 31/4 2.8 75 2.10
CHARACTERISTICSSlat width (mm/ ")
GP(mm)
RCC(mm)
Weightkg/m
SC 815 K325* internal code C.7.90.041 SC 815 K350* internal code C.7.90.061
* Size produced only upon request - delivery conditions and terms to beagreed. Standard shipping lengths: 80 pitches = 10 feet = 3,048 metres.
55/40
Hardnesssurf./core
PRODUCT CODES PRODUCT CODES
PRODUCT CODES PRODUCT CODES
SC 815 K450* internal code C.7.90.080
SC 815 K325*SC 815 K350*
82.5 31/4
88.9 31/2 1.61.6 150
1502.652.75
CHARACTERISTICSSlat width (mm/ ")
GP(mm)
RCC(mm)
Weightkg/m
55/4055/40
Hardnesssurf./core
SC 815 K450* 114.3 41/2 1.6 150 3.3055/40
S 815 K350 internal code 7.90.061S 815 K400 internal code 7.90.070S 815 K450 internal code 7.90.080S 815 K473* internal code 7.90.220S 815 K600 internal code 7.90.100S 815 K750 internal code 7.90.110
S 815 K225S 815 K250
S 815 K300S 815 K325
57.1 21/4
63.5 21/2
76.2 382.5 31/4 1.6
1.6
1.61.6 150
150
150150
2.182.25
2.352.50
CHARACTERISTICSSlat width(mm/ ")
GP(mm)
RCC(mm)
Weightkg/m
4343
4343
Hardness(HRC)
S 815 K350S 815 K400S 815 K450S 815 K473*
88.9 31/2
101.6 4114.3 41/2
120.0 -
1.61.6 150
1501.6 1501.6 150
2.752.653.003.3043
S 815 K600S 815 K750
152.4 6190.5 71/2
1.6 1501.6 150
4.205.10
4343
434343
REDUCED PLATE GAP (1.6)
REDUCED PLATE GAP (1.6)
14
Mignon straight running chains - Single hinge
STANDARD - INOX• Ferritic, AISI 430 stainless steel slats, work hardened, with shiny surface
having low roughness.• AISI 431 stainless steel pins, magnetic and work hardened for high resistance.
Standard shipping lengths: 80 pitches = 10 feet = 3,048 metres.
Standard shipping lengths: 80 pitches = 10 feet = 3,048 metres.
STELLA D - INOX 18/8• Chrome-nickel, austenitic AISI 304 stainless steel slats (18% Chrome -
8% Nickel), work hardened for HR - shiny - with a roughness of Ra < 0.5micron.
• Austenitic stainless steel pins (18% Chrome - 8% Nickel), work hardenedfor high resistance.
SSR 812 K197 internal code 7.00.010
SSAR 815 K197 internal code 7.10.010
SSR 812 K197 50.0 - 2.5 90 1.60
CHARACTERISTICSSlat width (mm/ ")
GP(mm)
RCC(mm)
Weightkg/m
20
Hardness(HRC)
SSAR 815 K197 50.0 - 2.5 90 1.60
CHARACTERISTICSSlat width(mm/ ")
GP(mm)
RCC(mm)
Weightkg/m
26
Hardness(HRC)
PRODUCT CODES
PRODUCT CODES
SUPER - HARD INOX• Special, chrome-nickel, stainless steel slats, work hardened for high resistance,
with shiny surface having a roughness of Ra ≤ 0.3 micron.• AISI 431 stainless steel pins, magnetic and work hardened for high resistance.
SSHR 812 K125 internal code 8.25.280
SSHR 812 K125 31.8 11/4 2.8 75 1.10
CHARACTERISTICSSlat width(mm/ ")
GP(mm)
RCC(mm)
Weightkg/m
30
Hardness(HRC)
SSHR 812 K175 44.5 13/4 2.8 75 1.3030
SSHR 812 K175 internal code 8.25.300
PRODUCT CODES
Standard shipping lengths: 80 pitches = 10 feet = 3,048 metres.
HB OR XHB PINSUPON REQUEST
15
NEWStraight running chains - Single hinge 1 Inch
SUPER - HARD INOX• Special, chrome-nickel, stainless steel slats, work hardened for high resistance,
with shiny surface having a roughness of Ra ≤ 0,3 micron.• AISI 431 stainless steel pins, magnetic and work hardened for high resistance.
D 820 - K 250 internal code 6.00.020SSH 512 K197 internal code S.9.00.010
SSH 512 K236 internal code S.9.00.036SSH 512 K250 internal code S.9.00.020
SSH 512 K217 internal code S.9.00.017
SSH 512 K283 internal code S.9.00.283SSH 512 K325 internal code S.9.00.040
PRODUCT CODES
* Standard shipping lengths: 120 pitches = 10 feet = 3,048 metres.
SSH 512 K350 internal code S.9.00.060SSH 512 K400 internal code S.9.00.070
CHARACTERISTICSSlat width
(mm)GP(mm)
RCC(mm)
Weightkg/m
Hardness(HRC)
SSH 512 K197 50.0 1.6 100 2.2030SSH 512 K217 55.0 1.6 100 2.2930SSH 512 K236 60.0 1.6 100 2.4130SSH 512 K250 63.5 1.6 100 2.4930SSH 512 K283 72.0 1.6 100 2.6530SSH 512 K325 82.5 1.6 100 2.8630SSH 512 K350 88.9 1.6 100 3.0130SSH 512 K400 101.6 1.6 100 3.2630
REDUCED PLATE GAP (1.6)
HB OR XHB PINSUPON REQUEST
REDUCED PLATE GAP (1.6)
Straight running chains - Single reinforced hinge
SUPER - HARD INOX• Special, chrome-nickel, stainless steel slats, work hardened for high resistance,
with shiny surface having a roughness of Ra ≤ 0.3 micron.• AISI 431 stainless steel pins, magnetic and work hardened for high resistance.
SSH 8127 K750 internal code S.7.00.175PRODUCT CODES
Standard shipping lengths: 80 pitches = 10 feet = 3,048 metres.
CHARACTERISTICSSlat width(mm/ “)
GP(mm)
RCC(mm)
Weightkg/m
Hardness(HRC)
SSH 8127 K750 190.5 71/2 1.6 150 5.1030
17
Straight running chains - Double hinge
STANDARD - INOX• Ferritic, AISI 430 stainless steel slats, work hardened, with shiny surface having low roughness.• AISI 431 stainless steel pins, magnetic and work hardened for high resistance.
SUPER - HARD INOX• Special, chrome-nickel, stainless steel slats, work hardened for high resistance, with shiny surface having a roughness of Ra ≤ 0.3 micron.• AISI 431 stainless steel pins, magnetic and work hardened for high resistance.
STELLA D - INOX 18/8• Chrome-nickel, austenitic AISI 304 stainless steel slats (18% Chrome - 8% Nickel), work hardened for HR - shiny - with a roughness of Ra < 0.5 micron.• Austenitic stainless steel pins (18% Chrome - 8% Nickel), work hardened for high resistance.
SS 802 K750 internal code 7.04.110
D 820 - K 250 internal code 6.00.020SSH 802 K750 internal code S.7.04.110
SS 802 K750 190.5 71/2 1.6 150 5.80
CHARACTERISTICSSlat width(mm/ ")
GP(mm)
RCC(mm)
Weightkg/m
20
Hardness(HRC)
Standard shipping lengths: 80 pitches = 10 feet = 3,048 metres.
SSA 805 K750 internal code 7.14.110
SSA 805 K750 190.5 71/2 1.6 150 5.80
CHARACTERISTICSSlat width(mm/ ")
GP(mm)
RCC(mm)
Weightkg/m
26
Hardness(HRC)
SSH 802 K750 190.5 71/2 1.6 150 5.80
CHARACTERISTICSSlat width(mm/ ")
GP(mm)
RCC(mm)
Weightkg/m
30
Hardness(HRC)
PRODUCT CODES
PRODUCT CODES
PRODUCT CODES
HB OR XHB PINSUPON REQUEST
REDUCED PLATE GAP (1.6)
REDUCED PLATE GAP (1.6)
REDUCED PLATE GAP (1.6)
ACCATE - CARBON STEEL• Heat-treated carbon steel slats.• Case-hardened carbon steel pins.
SR 802 K750 internal code 7.94.111
SR 802 K750 190.5 71/2 2.8 75 5.70
CHARACTERISTICSSlat width(mm/ ")
GP(mm)
RCC(mm)
Weightkg/m
43
Hardness(HRC)
PRODUCT CODES
Standard shipping lengths: 80 pitches = 10 feet = 3,048 metres.
S 802 K750 internal code 7.94.110
CHARACTERISTICSSlat width (mm/ ")
GP(mm)
RCC(mm)
Weightkg/m
Hardness(HRC)
S 802 K750 190.5 71/2 1.6 150 5.80 43
PRODUCT CODES
Standard shipping lengths: 80 pitches = 10 feet = 3,048 metres.
18
REDUCED PLATE GAP (1.6)
19
STELLA D - INOX 18/8• Chrome-nickel, austenitic AISI 304 stainless steel slats (18% Chrome - 8% Nickel),
work hardened for high resistance - shiny - with a roughness of Ra < 0.5 micron.• Austenitic stainless steel pins (18% Chrome - 8% Nickel), work hardened
for high resistance.
SSAR 804 K670 internal code 7.24.050
SSAR 804 K670 170.0 - 2.5 90 6.30
CHARACTERISTICSSlat width(mm/ ")
GP(mm)
RCC(mm)
Weightkg/m
26
Hardness(HRC)
SSAR 804 K750 190.5 71/2 2.5 90 6.8026
SSAR 804 K750 internal code 7.24.060
Straight running chains - Double reinforced hinge
PRODUCT CODES
Standard shipping lengths: 80 pitches = 10 feet = 3,048 metres.
20
Sideflexing hinged slat chains
FLEX RXMS - HARD INOX• Special, chrome-nickel, stainless steel slats, work hardened for high
resistance, with shiny surface having a roughness of Ra ≤ 0.3 micron.• Chrome-nickel, austenitic stainless steel guide shoes (18% Chrome -
8% Nickel), work hardened for high resistance.• AISI 431 stainless steel pins, magnetic and work hardened for high
resistance.
FLEX RXMC - INOX• Ferritic, AISI 430 stainless steel slats, work hardened, with shiny surface
having low roughness.• Chrome-nickel, austenitic stainless steel guide shoes (18% Chrome -
8% Nickel), work hardened for high resistance.• AISI 431 stainless steel pins, magnetic and work hardened for
high resistance.
SS 881 T K325 internal code 8.23.041 SSH 881 K325 internal code S.8.23.040SSH 881 K450 internal code S.8.23.080SSH 881 K750 internal code S.8.23.110SSH 881 T K325 internal code S.8.23.041SSH 881 T K450 internal code S.8.23.081SSH 881 T K750 internal code S.8.23.111
SS 881 T K325 82.5 31/4 457 3.10
Standard shipping lengths: 80 pitches = 10 feet = 3,048 metres.
CHARACTERISTICSSlat width(mm/ ")
Min. sideflexing radius(mm)
Weightkg/m
SSH 881 K325 SSH 881 K450SSH 881 K750SSH 881 T K325SSH 881 T K450SSH 881 T K750
82.5 31/4
114.3 41/2
190.5 71/2
82.5 31/4
114.3 41/2
190.5 71/2
2.182.252.352.502.652.85
CHARACTERISTICSSlat width (mm/ ")
Weightkg/m
457500500457500500
Min. sideflexing radius(mm)
PRODUCT CODES PRODUCT CODES
HB OR XHB PINSUPON REQUEST
21
SSA 881 K325SSA 881 K450SSA 881 K750SSA 881 T K325SSA 881 T K450SSA 881 T K750
2.903.605.303.103.805.50
CHARACTERISTICS
SSAA 881 T K325*SSAA 881 T K450*SSAA 881 T K750*
3.103.805.50
CHARACTERISTICS
FLEX RXM - INOX 18/8
FLEX RXM - INOX 316
S 881 K325S 881 K450S 881 K750S 881 T K250S 881 T K325S 881 T K450
114.3 41/2
190.5 71/2
63.5 21/2
82.5 31/4
114.3 41/2
2.903.605.302.653.103.80
CHARACTERISTICS
S 881 T K750 190.5 71/2 5.50
82.5 31/4 457500500457457500500
114.3 41/2
190.5 71/2
82.5 31/4 457500500
114.3 41/2
190.5 71/2
82.5 31/4
114.3 41/2
190.5 71/2
82.5 31/4 457500500457500500
PRODUCT CODES
PRODUCT CODESSSA 881 K325 internal code 8.13.040SSA 881 K450 internal code 8.13.080SSA 881 K750 internal code 8.13.110SSA 881 T K325 internal code 8.13.041SSA 881 T K450 internal code 8.13.081SSA 881 T K750 internal code 8.13.111
SSAA 881 T K325* internal code 8.33.041SSAA 881 T K450* internal code 8.33.081SSAA 881 T K750* internal code 8.33.111
Weightkg/m
Weightkg/m
• Chrome-nickel, austenitic AISI 304 stainless steel slats (18% Chrome - 8% Nickel), work hardened for HR - shiny with a roughness of Ra < 0.5 micron.• Chrome-nickel, austenitic stainless steel guide shoes (18% Chrome - 8% Nickel), work hardened for high resistance.• Austenitic stainless steel pins (18% Chrome - 8% Nickel), work hardened for high resistance.
• Chrome-nickel, austenitic AISI 316L stainless steel slats (18% Chrome - 14% Nickel - 3% Molybdenum).• Chrome-nickel, austenitic AISI 316L stainless steel guide shoes.• Austenitic AISI 316 stainless steel pins.
S 881 K325 internal code 8.93.040S 881 K450 internal code 8.93.080S 881 K750 internal code 8.93.110S 881 T K250 internal code 8.93.021S 881 T K325 internal code 8.93.041S 881 T K450 internal code 8.93.081S 881 T K750 internal code 8.93.111
Weightkg/m
* Size produced only upon request - delivery conditions and terms to beagreed. Standard shipping lengths: 80 pitches = 10 feet = 3,048 metres.
Slat width(mm/ ")
Min. sideflexing radius(mm)
Slat width(mm/ ")
Min. sideflexing radius(mm)
Slat width(mm/ ")
Min. sideflexing radius(mm)
PRODUCT CODES
FLEX RXMA - CARBON STEEL• Heat-treated carbon steel slats, with a surface and core hardness of 43 HRC.• Case-hardened carbon steel pins.NOTE: Upon request, the “Flex RXMA Tab”chain with a slat width of 82.5 mm (3 1/4”) can be produced in case-hardened carbon steel having a surfacehardness of 55 HRC and a core hardness of 40 HRC (code: C.8.93.041).
NEW
FLEX FM - INOX 18/8• Chrome-nickel, austenitic AISI 304 stainless steel slats (18% Chrome - 8% Nickel),
work hardened for HR - shiny - with a roughness of Ra < 0.5 micron.• Chrome-nickel, austenitic stainless steel guide shoes
(18% Chrome - 8% Nickel), work hardened for high resistance.• Austenitic stainless steel pins (18% Chrome - 8% Nickel), work
hardened for high resistance.
SSH 8811 K325 internal code S.8.26.040SSH 8811 K350 internal code S.8.26.060SSH 8811 K450 internal code S.8.26.080SSH 8811 K750 internal code S.8.26.110SSH 8811 T K325 internal code S.8.26.041SSH 8811 T K330 internal code S.8.26.042SSH 8811 T K350 internal code S.8.26.061SSH 8811 T K450 internal code S.8.26.081SSH 8811 T K750 internal code S.8.26.111
SSX 8811 T K325 internal code D.8.26.041SSX 8811 T K330 internal code D.8.26.042
SSH 8811 K325SSH 8811 K350SSH 8811 K450SSH 8811 K750
2.903.103.605.30
Standard shipping lengths: 80 pitches = 10 feet = 3,048 metres.
CHARACTERISTICSWeightkg/m
SSX 8811 T K325 3.10
CHARACTERISTICSWeightkg/m
FLEX FMS - HARD INOX• Special, chrome-nickel, stainless steel slats, work hardened for HR, with
shiny surface having a roughness of Ra ≤ 0.3 micron.• Chrome-nickel, austenitic stainless steel guide shoes (18% Chrome -
8% Nickel), work hardened for high resistance.• AISI 431 stainless steel pins, magnetic and work hardened for high
resistance.
FLEX FMD - HQ INOX• Special, new stainless steel, chrome-nickel (W.1.4589) slats, work hardened
for HR, with low surface roughness, Ra ≤ 0.2 micron.• Chrome-nickel, austenitic stainless steel guide shoes (18% Chrome -
8% Nickel), work hardened for high resistance.• Special martensitic stainless steel pins HB series, magnetic and
heat-treated for high resistance.
SSA 8811 K325 internal code 8.16.040 SSA 8811 K350 internal code 8.16.060SSA 8811 T K325 internal code 8.16.041SSA 8811 T K350 internal code 8.16.061
SSA 8811 K325SSA 8811 K350SSA 8811 T K325SSA 8811 T K350
2.903.103.103.30
CHARACTERISTICSWeightkg/m
88.9 31/2
114.3 41/2
190.5 71/2
82.5 31/4
Slat width(mm/ ")
SSH 8811 T K325
SSH 8811 T K350
3.10
3.30
82.5 31/4
88.9 31/2
SSH 8811 T K450SSH 8811 T K750
3.805.50
114.3 41/2
190.5 71/2
500500610610500
SSH 8811 T K330 3.1583.8 319/64 500500610610
Min. sideflexing radius(mm)
82.5 31/4
Slat width(mm/ ")
500SSX 8811 T K330 3.1583.8 319/64 500
Min. sideflexing radius(mm) 88.9 31/2
82.5 31/4
88.9 31/2
82.5 31/4
Slat width(mm/ ")
500500500500
Min. sideflexing radius(mm)
22
PRODUCT CODES
SS 8811 T K325 internal code 8.26.041SS 8811 T K330 internal code 8.26.042SS 8811 T K450 internal code 8.26.081SS 8811 T K750 internal code 8.26.111
CHARACTERISTICSWeightkg/m
FLEX FMC - INOX• Ferritic, AISI 430 stainless steel slats, work hardened, with shiny surface
having low roughness.• Chrome-nickel, austenitic stainless steel guide shoes (18% Chrome -
8% Nickel), work hardened for high resistance.• AISI 431 stainless steel pins, magnetic and work hardened for
high resistance.
Slat width(mm/ ")
SS 8811 T K325SS 8811 T K330
3.103.15
82.5 31/4
83.8 319/64
SS 8811 T K450SS 8811 T K750
3.805.50
114.3 41/2
190.5 71/2
500500610610
Min. sideflexing radius(mm)
PRODUCT CODES
PRODUCT CODES
PRODUCT CODES
REDUCEDPLATE GAP
HB OR XHB PINSUPON REQUEST
XHB PINSUPON REQUEST
23
FLEX FM2 - R = 190mm INOX 18/8• Chrome-nickel, austenitic AISI 304 stainless steel slats (18% Chrome - 8% Nickel), work hardened for high resistance - shiny - with a roughness of Ra < 0.5 micron.• Chrome-nickel, austenitic stainless steel guide shoes (18% Chrome - 8% Nickel), work hardened for high resistance.• Austenitic stainless steel pins (18% Chrome - 8% Nickel), work hardened for high resistance.
FLEX FMS2 - R = 190mm HARD INOX• Special, chrome-nickel, stainless steel slats, work hardened for high resistance, with shiny surface having a roughness of Ra ≤ 0.3 micron.• Chrome-nickel, austenitic stainless steel guide shoes (18% Chrome - 8% Nickel), work hardened for high resistance.• AISI 431 stainless steel pins, magnetic and work hardened for high resistance.
SSH 8811 R T K325 internal code S.8.29.041
SSH 8811 R T K325 3.00
CHARACTERISTICSWeightkg/m
82.5 31/4
Slat width(mm/ ")
190
Min. sideflexing radius(mm)
PRODUCT CODES
FLEX FMA2 - R = 190mm CARBON STEEL• Heat-treated carbon steel slats, with a surface and core hardness of 43 HRC.• Case-hardened carbon steel pins.
Standard shipping lengths: 80 pitches = 10 feet = 3,048 metres.Not to be used with a lateral curving discs.
SSA 8811 R T K325 internal code 8.19.041
SSA 8811 R T K325 3.00
CHARACTERISTICSWeightkg/m
82.5 31/4
Slat width(mm/ ")
190
Min. sideflexing radius(mm)
PRODUCT CODES
S 8811 R T K325 internal code 8.99.041
S 8811 R T K325 3.00
CHARACTERISTICSWeightkg/m
82.5 31/4
Slat width(mm/ ")
190
Min. sideflexing radius(mm)
PRODUCT CODES
REDUCED SIDEFLEXINGRADIUS (R.190)
HB OR XHB PINSUPON REQUEST
NEW
24
Sideflexing hinged slat chains for magnetic systems
NEW FLEX MAG D - HQ INOX• Special, new stainless steel, chrome-nickel (W.1.4589) slats - magnetic - work
hardened for HR, with shiny surface having a roughness of Ra ≤ 0.2 micron.• Special, martensitic stainless steel pins HB series, magnetic and heat-treated for high resistance.
SSX 8811 M K325 internal code D.7.08.040
SSH 8811 M K325 internal code S.7.08.040SSH 8811 M K330 internal code S.7.08.042
PRODUCT CODES
PRODUCT CODES
SSH 8811 M K450 internal code S.7.08.080SSH 8811 M K750 internal code S.7.08.110
SSX 8811 M K330 internal code D.7.08.042
SSH 8811 M K325 2.50
CHARACTERISTICSWeightkg/m
82.5 31/4
Slat width(mm/ ")
500
Min. sideflexing radius(mm)
Standard shipping lengths: 80 pitches = 10 feet = 3,048 metres.
SSH 8811 M K330SSH 8811 M K450SSH 8811 M K750
2.653.204.90
114.3 41/2
190.5 71/2
83.8 319/64 500500500
SSX 8811 M K325 2.50
CHARACTERISTICSWeightkg/m
82.5 31/4
Slat width(mm/ ")
500
Min. sideflexing radius(mm)
SSX 8811 M K330 2.6583.8 319/64 500
NEW FLEX MAG - HARD INOX• Special, chrome-nickel, stainless steel slats, work hardened for high resistance,
with shiny surface having a roughness of Ra ≤ 0.3 micron.• Special, stainless steel pins, 400 series - magnetic - work hardened for high resistance.
SS 8811 M K325 internal code 7.08.040SS 8811 M K330 internal code 7.08.042
PRODUCT CODES
SS 8811 M K450 internal code 7.08.080SS 8811 M K750 internal code 7.08.110
SS 8811 M K325 2.50
CHARACTERISTICSWeightkg/m
82.5 31/4
Slat width(mm/ ")
500
Min. sideflexing radius(mm)
SS 8811 M K330SS 8811 M K450SS 8811 M K750
2.653.204.90
114.3 41/2
190.5 71/2
83.8 319/64 500500500
NEW FLEX MAG - INOX• Ferritic, AISI 430 stainless steel slats, work hardened, with shiny surface
having low roughness.• Special, stainless steel pins, 400 series-magnetic-work hardened for high resistance.
HB OR XHB PINSUPON REQUEST
XHB PINSUPON REQUEST
REDUCEDPLATE GAP
25
Sideflexing chains for magnetic systems - Reinforced hinge
NEW FLEX MAG - HARD INOX• Special, chrome-nickel, stainless steel slats, work hardened for high resistance, with shiny surface having a roughness of Ra ≤ 0.3 micron.• Special, stainless steel pins, 400 series - magnetic - work hardened for high resistance.
SSH 8817 M K750 internal code S.7.08.175
SSH 8817 M K750 5.03
CHARACTERISTICSWeightkg/m
Standard shipping lengths: 80 pitches = 10 feet = 3,048 metres.
190.5 71/2
Slat width(mm/ ")
750
Min. sideflexing radius(mm)
PRODUCT CODES
HB OR XHB PINSUPON REQUEST
26
Straight running chains with rubber inserts for inclined conveyors
SUPER G / DHG - HARD INOX• Special, chrome-nickel, stainless steel slats, work hardened for high resistance, with a rubber insert.• Chrome-nickel, austenitic stainless steel guide shoes (18% Chrome - 8% Nickel), (Super-G TAB).• AISI 431 stainless steel pins, magnetic and work hardened for high resistance.
SSHR 812 G K125 internal code SG.8.25.280SSHR 812 G K325 internal code SG.7.00.040SSHR 812 T G K325 internal code SG.7.00.T40
SSHR 812 G K125SSHR 812 G K325SSHR 812 T G K325
1.202.803.40
CHARACTERISTICSWeightkg/m
SSH 802 G K750 internal code SG.7.04.110
SSH 802 G K750 6.20
CHARACTERISTICSWeightkg/m
SSH 812 G K450 internal code SG.7.00.080SSH 812 G K600 internal code SG.7.00.100SSH 812 G K750 internal code SG.7.00.110
SSH 812 G K450SSH 812 G K600SSH 812 G K750
3.504.405.30
CHARACTERISTICSWeightkg/m
31.8 11/4
82.5 31/4
82.5 31/4 2.82.82.8 75
7575
Slat width(mm/ ")
GP(mm)
RCC(mm)
303030
Hardness(HRC)
114.3 41/2
152.4 6190.5 71/2 1.6
1.61.6 150
150150
Slat width (mm/ ")
GP(mm)
RCC(mm)
303030
Hardness(HRC)
190.5 71/2 1.6 150
Slat width(mm/ ")
GP(mm)
RCC(mm)
30
Hardness(HRC)
PRODUCT CODES
PRODUCT CODESSSH 8127 G K750 internal code SG.7.00.175
SSH 8127 G K750 5.35
CHARACTERISTICSWeightkg/m
190.5 71/2 1.6 150
Slat width(mm/ ")
GP(mm)
RCC(mm)
30
Hardness(HRC)
PRODUCT CODES
PRODUCT CODES
Standard shipping lengths: 80 pitches = 10 feet = 3,048 metres.
HB OR XHB PINSUPON REQUEST
REDUCED PLATE GAP (1.6)
REDUCED PLATE GAP (1.6)REDUCED PLATE GAP (1.6)
27
Sideflexing hinged slat chains with rubber inserts for inclined conveyors
FLEX RXMS G / NEW FLEX G MAG - HARD INOX• Special, chrome-nickel, stainless steel slats, work hardened for high resistance, with a rubber insert.• Chrome-nickel, austenitic stainless steel guide shoes (18% Chrome - 8% Nickel), (Flex RXMS - G).• Special, stainless steel pins, 400 series - magnetic - work hardened for high resistance.
SSH 881 G K325 internal code SG.8.23.040SSH 881 G K450 internal code SG.8.23.080SSH 881 G K750 internal code SG.8.23.110SSH 881 T G K325 internal code SG.8.23.041SSH 881 T G K450 internal code SG.8.23.081SSH 881 T G K750 internal code SG.8.23.111
SSH 881 G K325SSH 881 G K450SSH 881 G K750SSH 881 T G K325SSH 881 T G K450SSH 881 T G K750
3.103.805.503.304.005.70
CHARACTERISTICSWeightkg/m
Standard shipping lengths: 80 pitches = 10 feet = 3,048 metres.
114.3 41/2
190.5 71/2
82.5 31/4
114.3 41/2
190.5 71/2
82.5 31/4
Slat width(mm/ ")
457500500457500500
Min. sideflexing radius(mm)
SSH 881 M G K325 internal code SG.7.08.040SSH 881 M G K750 internal code SG.7.08.110
SSH 881 M G K325SSH 881 M G K750
2.705.10
CHARACTERISTICSWeightkg/m
190.5 71/2
82.5 31/4
Slat width(mm/ ")
500500
Min. sideflexing radius(mm)
SSH 8817 M G K750 internal code SG.708175
SSH 8817 M G K750 5.14
CHARACTERISTICSWeightkg/m
190.5 71/2
Slat width(mm/ ")
750
Min. sideflexing radius(mm)
PRODUCT CODES PRODUCT CODES
PRODUCT CODES
HB OR XHB PINSUPON REQUEST
28
Block body machined steel sprockets
FOR MIGNON /FLEX RXMC/FLEX RXMS/FLEX RXM/FLEX RXM 316/FLEX RXMA/FLEX FMC/FLEX FMS/FLEX FMD/FLEX FM/FLEX FMS2/FLEX FM2/FLEX FMA2/FLEX RXMS G/SUPER G TAB CHAINSThe sprocket tooth pitch (mm 19,05) is half the pitch of the chain (38,1 mm). Therefore, when a sprocket with an odd number ofteeth is used, the teeth engage the chain only every other revolution. This doubles the life of sprockets.
8.12.1208.12.1308.12.1408.12.1508.12.160
31.031.031.031.031.0
2.202.703.303.904.60
CODES / CHARACTERISTICSWidth(mm)
1921232527
Number ofteeth (z)
Weightkg/unit
117.10130.05142.00154.20166.60
DE outsidediameter (mm)
20.020.020.020.020.0
F plain borediameter (mm)
117.35129.25141.20153.20165.20
Pitchdiameter (mm)
FOR STRAIGHT RUNNING CHAINS AND FOR NEW FLEX MAG/NEW FLEX MAG D/NEW FLEX MAG G CHAINSThe sprocket tooth pitch (mm 19,05) is half the pitch of the chain (38,1 mm). Therefore, when a sprocket with an odd number of teeth is used,the teeth engage the chain only every other revolution. This doubles the life of sprockets.
8.12.0208.12.0308.12.0408.12.0508.12.060
43.5043.5043.5043.5043.50
3.053.804.605.406.40
CODES / CHARACTERISTICSWidth(mm)
1921232527
Number ofteeth (z)
Weightkg/unit
117.10130.05142.00154.20166.60
DE outsidediameter (mm)
20.020.020.020.020.0
F plain borediameter (mm)
117.35129.25
8.12.0058.12.010
43.5043.50
1.862.34
1517
92.90104.70
20.020.0
93.70105.47
141.20153.20165.20
Pitchdiameter (mm)
8.12.0708.12.080
43.5043.50
7.508.70
2931
179.05191.25
20.020.0
177.25189.30
29
1864 Straight running plate top chains
1864This high speed, high capacity series offers better efficiency and reliability in applications where high temperatures or abrasive materials are involved.• Steel and stainless steel top plates.• Base roller chain, 19,05 mm - 3/4” pitch ANSI 60.
1864 SS K325 internal code 1864.SS.0411864 SS K450 internal code 1864.SS.0811864 SS K600 internal code 1864.SS.1011864 SS K750 internal code 1864.SS.111
1864 SS K3251864 SS K4501864 SS K600
3.334.005.33
CHARACTERISTICSWeight
kg/m
82.5114.3152.4
Slat width(mm)
260002600026000
Ultimate strenght(N)
1864 SS K750 5.68190.5 26000
PRODUCT CODES1864 K325 internal code 1864.CC.0411864 K450 internal code 1864.CC.0811864 K600 internal code 1864.CC.1011864 K750 internal code 1864.CC.111
1864 K3251864 K4501864 K600
3.334.005.33
Weightkg/m
82.5114.3152.4
Slat width(mm)
370003700037000
Ultimate strenght(N)
1864 K750 5.68
1864 A K325 internal code 1864.CS.0411864 A K450 internal code 1864.CS.0811864 A K600 internal code 1864.CS.1011864 A K750 internal code 1864.CS.111
1864 A K3251864 A K4501864 A K600
3.334.005.33
Weightkg/m
82.5114.3152.4
Slat width(mm)
370003700037000
Ultimate strenght(N)
1864 A K750 5.68190.5 37000
Standard shipping lengths: 160 pitches = 10 feet = 3,048 metres.
NOTE ON MATERIALS1864 - steel base roller chain, steel top plate.1864 A - steel base roller chain, stainless steel top plate.1864 SS - stainless steel base roller chain, stainless steel top plate.
CHARACTERISTICS
CHARACTERISTICS
190.5 37000
PRODUCT CODES
PRODUCT CODES
30
1874 Sideflexing plate top chains
1874This high speed, high capacity series offers better efficiency and reliability in applications where high temperatures or abrasive materials are involved.• Steel and stainless steel top plates.• Base roller chain, 19,05 mm - 3/4” pitch ANSI 63 SB.
D 820 - K 250 internal code 6.00.0201874 K325 internal code 1874.CC.0411874 K450 internal code 1874.CC.0811874 K600 internal code 1874.CC.1011874 K750 internal code 1874.CC.111
1874 K3251874 K4501874 K600
4.204.805.70
CHARACTERISTICSWeight
kg/mR
(mm)
82.5114.3152.4 34.1
34.134.1
Slat width(mm)
Straight C(mm)
Curve C(mm)
270002700027000
Ultim. str.(N)
1874 K750 6.40190.5 34.134.634.634.6
34.6457356356
61027000
1874 A K325 internal code 1874.CS.0411874 A K450 internal code 1874.CS.0811874 A K600 internal code 1874.CS.1011874 A K750 internal code 1874.CS.111
1874 A K3251874 A K4501874 A K600
4.204.805.70
CHARACTERISTICSWeight
kg/mR
(mm)
82.5114.3152.4 34.1
34.134.1
Slat width(mm)
Straight C(mm)
Curve C(mm)
270002700027000
Ultim. str.(N)
1874 A K750 6.40190.5 34.134.634.634.6
34.6457356356
61027000
PRODUCT CODES
1874 SS K325 internal code 1874.SS.0411874 SS K450 internal code 1874.SS.0811874 SS K600 internal code 1874.SS.1011874 SS K750 internal code 1874.SS.111
1874 SS K3251874 SS K4501874 SS K600
4.204.805.70
CHARACTERISTICSWeight
kg/mR
(mm)
82.5114.3152.4 34.1
34.134.1
Slat width(mm)
Straight C(mm)
Curve C(mm)
210002100021000
Ultim. str.(N)
1874 SS K750 6.40190.5 34.134.634.634.6
34.6457356356
61021000
PRODUCT CODES
PRODUCT CODES
Standard shipping lengths: 160 pitches = 10 feet = 3,048 metres.
NOTE ON MATERIALS1874 - steel base roller chain, steel top plate.1874 A - steel base roller chain, stainless steel top plate.1874 SS - stainless steel base roller chain, stainless steel
top plate.
Legend
o = Little resistance - not recommended
= Good resistance - it can be used= Average resistance•
••
The
indi
cate
dda
taar
eap
prox
imat
eas
the
corr
osio
nre
sist
ance
ofth
eab
ove-
men
tione
dst
eels
,acc
ordi
ngto
the
cond
ition
sof
use,
isre
late
dto
the
wor
kte
mpe
ratu
re,t
heco
ncen
tratio
nof
the
chem
ical
agen
t,th
edu
ratio
nof
the
cont
actw
ithit,
etc.
CHEMICAL AGENTAcetic acidAcetoneAluminium chlorideAmmoniaAmmonium chlorideAmyl alcoholAnilineAnimal oilBeerBenzeneBenzoic acidBenzolBoric acidBrineButterButyl alcoholButyric acidCalcium chlorideCarbon disulphideCarbon tetrachlorideCarbonated drinksCaustic soda (20%)Chlorine waterChloroformCitric acidCopper sulphateDiet oilDiet fatDiluted acetic acidDistilled waterEthyl acetateEthyl alcoholEthyl chlorideFlax oilFormaldehydeFormic acidFreon 12Fresh waterFruit juiceGasolineGlycerineHydrochloric acidHydrofluoric acidHydrogen peroxideIodineIron chlorideLactid acidMagnesium chlorideMercuryMethyl alcoholMethylene chlorideMilkNitric acidOilOil etherOleic acidParaffinPhenolPhosphoric acidPotassium hydroxineSea waterSilver nitrateSoapy waterSodium carbonateSodium chlorideSodium hydroxineSodium hypochloriteSodium silicateSodium sulphateSoft drinksSulphuric acidTartaric acidTrichlorethyleneTurpentineVegetable juiceVegetable oilVinegarWhiskeyWineXilol
STAINLESS STEEL STAINLESS STEELFERRITIC
INOX
SPECIAL Cr-NiSTAINLESS STEEL STAINLESS STEELSPECIALNEWCr-Ni
HARD INOX HQ INOX
AUSTENITICSTAINLESS STEEL
AUSTENITIC
INOX 18/8 INOX 316o
o
oo•
••••
o
••
••
•••••
o
o
o
o
o
•
o•• •• ••
o o o
••••
••o
o o o •
• •o
•• •• •o
o o oo o o
oo
o o•• ••
••
•
•
•
•••••
o
o
•
••
•• ••
••
••••
••••
• ••
••
••••
•• •••• ••
•
•• •
•••••
o o o
•• •• ••
•• ••• •• ••
o o o
o o oo
o ooo
o oo
ooo
oo
o
o
•oo
o o
•• •
• •
•o o
•• •• ••
ooo
o
•
•
•
•••
•
•
••
oo
o••
oooo
ooo
oo
•
•
•
•
••••••
••••••
••••••
o•
••
o
o•
••
ooo
oo
o•••
•
o•
••
o
•••
ooo
•o
o•••
•••
•••
•••
•
o•••
o
•• •
••
••
•••
•• •• •• ••
•o
o
••••
••
••
••••••
••••••••••
••
••••
•
•
••••
••••••••••
•
•
•••••
••
•••••••••••••••••••
••
••••
••
•••••••••••••••••
CARBON STEELooooooo
•••oo•ooooooo
o
ooo
•
ooo•oooo
oo
oo•
oo•ooo
oo
ooooooooo•o
••oo
o
ooo
o
oo
oooo
o
•oo
o
o
o
ooooo
••
oo
o
•
••
••
••
o o o •
•
•••
•••
•••
•
•••
••••
••
••
•
••
••
••••••••
••••
••
••••
••••
••
••
•
••••••••••
•
••
••
oo
o••
••••
••••••••••••••••••••••
••
•••
•••••••••••••••••
••••o
••••••
o
••
Steel corrosion resistance table
31Zinc chloride
A
E
D
C
B
F
G
H
I
LM
NO
P
S
V
T
W
XZ
••••
•••••••
••
32graphic project: signal lost / london
MAGRIS s.r.l.via Vanizza 10 (z.i. Sarano) 31025 S. Lucia di Piave TV - Italytel +39 0438 460226 / fax +39 0438 701843e-mail magris@magris.comwww.magris.com
Recommended