View
44.057
Download
0
Category
Preview:
Citation preview
History of wristwatch
Today, a wristwatch is considered as much of a status symbol as a device to tell time. In an age when cell phones and digital pagers display tiny quartz clocks, the mechanical wristwatch has slowly become less of an object of function and more a piece of modern culture.
Walk into the boardroom of any Fortune 500 company and you’re likely to see dozens of prestigious wristwatches, including such names as Rolex, Vacheron Constantine, Frank Muller, Jaeger-LeCoultre and even Patek Philippe. However, this was not always the case. Less than 100 years ago, no self-respecting gentleman would be caught dead wearing a wristwatch. In those days of yore, real men carried pocket watches, with a gold half-hunter being the preferred status symbol of the time—no pun intended.
Wristlets, as they were called, were reserved for women, and considered more of a passing fad than a serious timepiece. In fact, they were held in such disdain that many a gentlemen were actually quoted to say they “would sooner wear a skirt as wear a wristwatch”.
The established watch making community looked down on them as well. Because of their size, few believed wristlets could not be made to achieve any level of accuracy, nor could they withstand the basic rigors of human activity. Therefore, very few companies produced them in quantity, with the vast majority of those being small ladies’ models, with delicate fixed wire or chain-link bracelets.
This all started to change in the nineteenth century, when soldiers discovered their usefulness during wartime situations. Pocket watches were clumsy to carry and thus difficult to operate while in combat. Therefore, soldiers fitted them into primitive “cupped” leather straps so they could be worn on the wrist, thereby freeing up their hands during battle. It is believed that Girard-Perregaux equipped the German
Imperial Naval with similar pieces as early as the 1880s,which they ore on their wrists while synchronizing naval attacks, and firing artillery.
In 1906, the evolution of wristlets took an even bigger step with the invention of the expandable flexible bracelet, as well as the introduction of wire loops (or lugs) soldered onto small, open-faced pocket watch cases, allowing leather straps to be more easily attached. This aided their adaptation for military use and thus marked a turning point in the development of wristwatches for men.
Another timely issue was the vulnerability of the glass crystal when worn during combat. This was addressed by utilizing “pierced metal covers”, frequently called shrapnel guards. These were basically metal grills (often made of silver), placed over the dial of the watch—thereby protecting the glass from damage while still allowing the time to be easily read.
A less common solution was the use of leather covers, snapped into place over the watch. While they did offer protection from damage, they were cumbersome to use, and thus were primarily seen in the extreme climates of Australia and Africa
Over the next decade, watch companies slowly added additional models to their catalogs, and finally, by the mid-1930s, they accounted for 65 percent of all watches exported by Switzerland. It was an uphill battle, but the wristwatch had finally arrived. They were now accurate, waterproof and, by 1931, perpetually self-winding, when Rolex introduced the Auto Rotor, a revolutionary design, which is used to this day by watch companies around the world.
The success of the wristwatch was born out of necessity, and Rolex continued this tradition by introducing a series of Professional, or “tool watches” in the early 1950s. These models, including the Submariner, Explorer, GMT-Master, Turn-O-Graph, and Milgauss were also designed out of necessity, as they included features and attributes that were essential for a specific task or profession.
Because of its rugged design, variations of the Submariner have subsequently been issued to numerous militaries, including the British Royal Navy, Royal Canadian Navy and British Royal Marines, as well as the U.S. Navy Seals. Over the years, dozens of companies like Omega, Benrus and Panerai have also supplied specialty watch models for military duty.
.With the general public now leaning toward high-tech, digital gadgets, the classic mechanical wristwatch was came to the market.
Profile of the company
TATA started in 1868 by Jamshetji Musser Wangi in textile industry. Due to the industrial revolution TATA diversified its field one of the fields is to the watch sector, named as TITAN.
TITAN entered into the watch sector in 1986-87.They concentrated only on Quartz watches. Titan penetrated the market from mechanical type to quartz, Imported to indian,TITAN is banded by common culture and vision is TATAsTrust,reliability,value of money, highly quality,fair dealings, highly ethical, professional management.
Kinds of watches available in Titan
Analog
Digital
Distribution channels:
1993-94 New retailing network initiated by TITAN using exclusive show room to see in products.
Service network:
31 Service stations run by the company, 268 services authorized stations, spare parts
Setup in Bangalore .Decentralized of repair activities through training of dealers and appointment of authorized parts distributors. It operates in Bombay, Chennai, Calcutta and Delhi.
Achievements in customer service network:
94% of watches return in 7 days, spares are processed with in 48 hours,
Introduction to the study
Marketing has assumed much in present day business world. The success of failure
Of any organization profit making or non-profit making depends on the
Marketing. Marketing has special significance in the modem management of
Business concept. In the words of peter F Drucker,"Marketing is the
Distinguishing and unique function of the business”
Business decisions should be “Marketing or customer oriented rather than
Product oriented gearing operations primarily to the office satisfaction of
Customer wants and needs. What marketing creates is a permanent existence of
The entity of customers”, the substance of particular group of customer or the
Different group of customers for a company products reduces its business risk and
Expands its planning horizon. It serves the business and the business turn serves
The market, through planning research and developing. An activity of any type of Business undertaking makes use collection of data.
OBJECTIVES OF THE STUDY
PRIMARY OBJECTIVE
1) To study the attitude and satisfaction among the consumers for
Titan fastback watches, at SRM University (Kattankulathur
campus).
SECONDARY OBJECTIVE
1) To study and analyze various factors influence the consumers to
purchase the fastrack watches.
2) To analyze the factors influencing perception and buying decision
of consumers.
3) To find out the effectiveness of advertisements for fastrack
watches.
SCOPE OF THE STUDY
The study attempts to identify the reach of Titan fastrack watches
which would help the company in formulating suitable strategies. The
study also identifies the attitudes and preference of the consumers. The
study also focused on Media through which the product reaches the
consumers.
LIMITATIONS OF THE STUDY
1. The geographical scope of the study is limited to SRM University
kattankulathur campus alone.
2. The sample size is confined to 50.
3. The consumer’s attitude may change in future due to change in their
standard of living.
4. The Respondents were sometimes unable to spend much time for
filling up the, questionnaire. So, the chances for bias in the respondents
answer were on the higher side.
RESEARCH METHODOLOGY
RESEARCH DESIGN
The Research Design adopted in the study was descriptive in nature
because the study aims at describing the situation as it exists at
present. It shows the consumers satisfaction for fastrack watches.
SAMPLE SIZE
The Sample Size of this study is 50.
POPULATION
The Population of this study is indefinite
SAMPLING METHOD
The study involves area sampling method. Area sampling method
involves selecting a probability sample of geographic areas and selecting
units or individuals within the selected areas for the sample
SOURCES OF DATA
The Study used both Primary and Secondary data.
PRIMARY DATA:
The primary data was collected from the respondents using
questionnaire.
SECONDARY DATA:
The Secondary data was collected from the company’s official website.
METHODS OF DATA COLLECTION
Data was collected from the customers with the help of a
questionnaire.
DATA ANALYSIS METHODThe Data was collected from the main study and was analyzed using
Based on the results conclusion were drawn and suggestions were
made.
No of users of Fastrack watches (Sample Size-50)
TABLE – 1
TABLE SHOWING THE USERS OF FASTRACK
S.NO PARTICULARS NO. OF RESPONDENTS PERCENTAGE
1. YES 17 34%
2. NO 33 66%
TOTAL 50 100%
using o
f fastr
ack
not usin
g of fa
strack
0
5
10
15
20
25
30
35
no of person using fas-track
INTERPRETATION :
It is inferred that from the sample of 50, at SRM University, 34% are the users of fastrack and
66% are not using fastrack watches.
Influencer for purchase
TABLE – 3
TABLE SHOWING THE INFLUENCER FOR THE PURCHASE OF FASTRACK
S.NO PARTICULARS NO. OF RESPONDENTS PERCENTAGE
1. Friends 2 12%
2. Advertisement 15 88%
3. Family 0 0
TOTAL 100%
INTERPRETATION: It is understood that, majority of the respondents i.e., 88% of them were influenced
by the advertisements appearing in media and 12% of the respondents purchased fastrack watches
when refereed by their friends.
friends family adversitement0
2
4
6
8
10
12
14
16
influence for purchaseColumn1Column2
TABLE – 4
TABLE SHOWING THE PREFERRED ATTRIBUTE OF FASTRACK
S.NO PARTICULARS NO. OF RESPONDENTS PERCENTAGE
1. Design 4 23%
2. Use friendly 2 12%
3. Brand 11 65%
TOTAL 100%
Most preferred attribute
designuser friendlybrand
INTERPRETATION:
It is understood that, majority of the respondents i.e., 65% of the respondents preferred fastrack
watches due to its brand image and next majority, i.e. 23% of the respondents preferred it due to its
design.
Gender of the users:
TABLE – 2
TABLE SHOWING THE USERS ON THE BASIS OF GENDER
S.NO PARTICULARS NO. OF USERS PERCENTAGE
1. Male 9 53%
2. Female 8 47%
TOTAL 17 100%
male female7.4
7.6
7.8
8
8.2
8.4
8.6
8.8
9
9.2
INTERPRETATION : It is inferred that 53% of the users are male and 47% of the users are female. Hence
the male users are more than female users.
TABLE – 6
TABLE SHOWING THE SATISFACATION LEVEL OF FASTRACK
S.NO ATTRIBUTES Brand PERCENTAGE
1. Highly satisfied 7 41%
2. Satisfied 8 47%
3. Dissatisfied 2 12%
TOTAL 17 100%
S.NO ATTRIBUTES Price PERCENTAGE
1. Highly satisfied 3 18%
2. Satisfied 11 65 %
3. Dissatisfied 3 17%
TOTAL 17 100%
S.NO ATTRIBUTES Variety PERCENTAGE
1. Highly satisfied 5 29%
2. Satisfied 6 35 %
3. Dissatisfied 6 36%
TOTAL 17 100%
highly satisfied satisfied dissatisfied0
2
4
6
8
10
12
14
Interpretation:
It is understood that the users of fastrack watches are quite satisfied with the brand image of fastrack
and with its pricing strategies, but dissatisfied with the varieties.
RANK DESIGN USER FRIENDLY BRAND
3 9 8 112 4 7 21 4 2 4
TOOL OF ANALYSIS: Weighted Average
X=€ wx /€ w
REASON WEIGHTED AVERAGE RANK
DESIGN 39/6=6.5 3
USER 40/6=6.6 2
BRAND 41/6=6.8 1
SUGGESTIONS
TV advertisements can be renewed explaining the product feature and
aggressive marketing will help the company.
Awareness of the product is less among the people. So, the company may
take several steps to create such awareness regarding its values to the
customers.
The company can adopt new strategies and policies to overcome the
competition.
CONCLUSION
Gaining and maintaining consumer preference is a battle that is never really
won. Continued and consistent branding initiatives that reinforce the consumer’s
purchase decision will, over time, land the product in consumer preference sets.
Attaining and sustaining preference is an important step on the road to gaining
brand loyalty
Most of the consumers prefer Fastrack watches in SRM University campus, due to
its strong brand image, and the main factor forcing the customers to buy fastrack
watch is advertisements through the print and electronic media.
Recommended