MAXXLINK products are backed by the car...

MAXXLINK products are backed by the car audio professionals at Maxxsonics. In fact, if you purchase a MAXXLINK High Performance V3 or Premium V2 Amp Kit with a qualifying MB QUART, CRUNCH, HIFONICS or AUTOTEK amplifier, Maxxsonics will extend your warranty.Yeah, we’re that confident!

Tested Tough! That’s the foundation for every MAXXLINK product. Hours of design and testing go into each part to ensure that they not only meet but far exceed industry standards for performance and durability.

For more information regarding warranty with MAXXLINK, check out maxxwarranty.com/maxxlink

Product Technology:

HEPTAflex: Ultra fine strands of wire are spun into seven smaller groups then bundled together to create the ultimate power wire. Combine that with a proprietary PVC jacket and you get the industries most flexible power wire. HEPTAflex cable is found in all levels of MAXXLINK amp kits.

QUADRAtwist: The best way to reject unwanted engine noise is to twist your conductor and shield. QUADRAtwist takes this to the next level by twisting both the right and left RCAs to add another dimension of noise rejection.

DUOtwist: Rejecting noise in two conductor cables requires that the conductor and shield be twisted together. All MAXXLINK DUOtwist cables use a proprietary right-angle twist to offer the highest level of rejection available in its category.

UNItwist: MAXXLINK V1 signal cables employ a coaxial design but it’s not your standard coaxial cable. The center conductor is not a solid strand but a precision woven tinned copper strand that offers improved flexibility. The standard foil shield has been eliminated in favor of another woven strand design offering increased surface area for improved shielding.

FLEXIbrass: All MAXXLINK V2 and V3 brass is designed without the need for troublesome reducers. Reducers minimize contact area interrupting power flow. V2 and V3 brass uses an innovative wide mouth design and proprietary screw that accepts a wider range of wire gauge with greater contact area.

MAXXLINK amplifier installation kits provide a complete system solution.With three levels of product to choose from, you’re likely to findthe right combination for your system.

Model Shown: VCAK-4V3

V3

VPAK-4V3 CEA-2015 full speci�cation 4AWG ampli�er installation kitVCAK-4V3 CEA-2015 full speci�cation 4AWG complete amp kit with QUADRAtwist RCAVCAK-D4V3 CEA-2015 full speci�cation 4AWG complete dual amp kit with QUADRAtwist RCAVPAK-8V3 CEA-2015 full speci�cation 8AWG ampli�er installation kitVCAK-8V3 CEA-2015 full speci�cation 8AWG complete amp kit with QUADRAtwist RCAVPAK-10V3 CEA-2015 full speci�cation 10AWG ampli�er installation kitVCAK-10V3 CEA-2015 full speci�cation 10AWG complete amp kit with QUADRAtwist RCA

High Performance Amp Kits

V1

VCAK-4V1-4 1000 watt tinned CCA four channel ampli�er install kit with UNItwist RCAVCAK-4V1 1000 watt tinned CCA ampli�er install kit with UNItwist RCAVPAK-4V1 1000 watt tinned CCA ampli�er install kitVCAK-8V1 500 watt tinned CCA ampli�er install kit with UNItwist RCAVPAK-8V1 500 watt tinned CCA ampli�er install kit

High-Value Amp Kits

V2

VPAK-4V2 Full speci�cation tinned CCA 4AWG ampli�er installation kitVCAK-4V2 Full speci�cation tinned CCA 4AWG complete amp kit with DUOtwist RCAVCAK-D4V2 Full speci�cation tinned CCA 4AWG complete dual amp kit with DUOtwist RCAVPAK-8V2 Full speci�cation tinned CCA 8AWG ampli�er installation kitVCAK-8V2 Full speci�cation tinned CCA 8AWG complete amp kit with DUOtwist RCA

Premium Amp Kits

A stereo system is only as strong as its weakest link. FLEXIbrass by MAXXLINKprovides the strongest link available in the business. No cheap metal here.FLEXIbrass utilizes REAL brass components. Everything is plated using the latest techniques to ensure long–life.

All MAXXLINK power distribution products accept the widest range of wire gauge without the use of current-robbing reducers. The wide range of available fuse holders, distribution systems and battery terminals ensure you have what you need for any type of installation, large or small!

Model Shown: VFD3AFS

VAGU1 In-line AGU fuse holder- 4 & 8awg - satin nickel �nishVMAFS1 In-line MAXI & AFS/mini ANL fuse holder - 0 & 4awg - satin nickel �nishVANLAFS1 In-line ANL & mini ANL fuse holder - 0 & 4awg - satin nickel �nishVDB3 One in, three out distribution block - satin nickel �nishVBT48 4 & 8awg multi-input positive & negative battery terminal - satin nickel �nishVBT04 0 & 4awg multi-input positive & negative battery terminal - satin nickel �nishVGT1 Single input, dual screw grounding terminal - satin nickel �nishVGT2 Dual input, dual screw grounding terminal - satin nickel �nishVFD3AGU Three position AGU fused distribution block - satin nickel �nishVFD3AFS Three position AFS/mini ANL fused distribution block - satin nickel �nishVBSPS GM battery side post adaptor - short - satin nickel �nishVBSPE GM battery side post adaptor - extended - satin nickel �nishVST4 4AWG split fork terminal four pack - nickel �nishVST8 8AWG split fork terminal four pack - nickel �nishVRT4 4AWG ring terminal four pack - nickel �nishVRT8 8AWG ring terminal four pack - nickel �nish

V3FLEXIbrass Power Distribution

WATTS 2000 4000 6000 8000 10000

VHC35V3

VHC5V3

VDC3.0V2

VC3.0V2

VDC1.5V1

VC1.5V1

MAXXLINK HYPERcharge capacitors are the solution! Each MAXXLINK capacitoris designed with the lowest ESR (Equivalent Series Resistance) available providing the fastest recharge times possible. This ensures that your amplifier gets the power it needs to perform at its maximum level.

With six models available, MAXXLINKhas a capacitor that will work with

your system, large or small!

In car audio, it’s all about the power. But big amplifiers and subwoofers require lots of juice to perform at their peak, and weak factory electrical systems can’t provide the juice necessary to get the job done.

Model Shown: VHC35V3

V3

VHC35V3 35 farad HYPERcharge hybrid capacitorVHC5V3 5 farad HYPERcharge hybrid capacitor

VDC3.0V2 3 farad HYPERcharge digital top capacitorVC3.0V2 3 farad HYPERcharge capacitor

V2

VDC1.5V1 1.5 farad HYPERcharge digital top capacitorVC1.5V1 1.5 farad HYPERcharge capacitor

V1

HYPERchargeHybrid Caps

HYPERchargePerformance Caps

HYPERchargeValue Caps

QUADRAtwist: The best way to reject unwanted engine noise is to twist your conductor and shield. QUADRAtwist takes this to the next level by twisting both the right and left RCA’s to add another dimension of noise rejection.

DUOtwist: Rejecting noise in two conductor cables requires that the conductor and shield be twisted together. All MAXXLINK DUOtwist cables use a proprietary right-angle twist to offer the highest level of rejection available in its category.

UNItwist: MAXXLINK V1 signal cables employ a coaxial design but it’s not your standard co-axial cable. The center conductor is not a solid strand but a precision woven tinned copper conductor that offers improved flexibility. The standard foil shield has been eliminated in favor of another woven design offering increased surface area for improved shielding.

VRCA-03V1 3’ UNItwist RCA cableVRCA-10V1 10’ UNItwist RCA cableVRCA-16V1 16’ UNItwist RCA cableVRCA-20V1 20’ UNItwist RCA cableVRCA-Y2MV1 Pair of UNItwist one female to two male y adaptorsVRCA-Y2FV1 Pair of UNItwist one male to two female y adaptorsVRCA-2FBC Pair of female RCA barrel connectorsVRCA-2MBC Pair of male RCA barrel connector

V1UNItwist RCA Cable

V3

VRCA-03V3 3’ QUADRAtwist RCA cableVRCA-10V3 10’ QUADRAtwist RCA cableVRCA-16V3 16’ QUADRAtwist RCA cableVRCA-20V3 20’ QUADRAtwist RCA cableVRCA-Y2MV3 Pair of QUADRAtwist one female to two male y adaptorsVRCA-Y2FV3 Pair of QUADRAtwist one male to two female y adaptors

QUADRAtwist RCA Cable

V35-03V2 3’ DUOtwist 3.5mm to 3.5mmVRCA-03V2 3’ DUOtwist RCA cableVRCA-10V2 10’ DUOtwist RCA cableVRCA-16V2 16’ DUOtwist RCA cableVRCA-20V2 20’ DUOtwist RCA cableVRCA-Y2MV2 Pair of DUOtwist one female to two male y adaptorsVRCA-Y2FV2 Pair of DUOtwist one male to two female y adaptors

V2 DUOtwist RCA Cable

A full lineup of smart converters designed for virtually any power range covering every application from a simple subwoofer upgrade to complicated high-end OEM integration. MAXXLINK has you covered.

Bulk spools of MAXXLINK wire are the only way to ensure that you have enough supply on hand to meet demand. MAXXLINK spools are available in a variety of sizes and include high-end features like…

HEPTAflex: Ultra fine strands of wire are spun into seven smaller groups then bundled together to create the ultimate power wire. Combine that with a proprietary PVC jacket and you get the industries most flexible power wire.

UNIflex: Fine wire strands are twisted together to create a flexible cable without memory. Add our proprietary PVC jacket and the result is some seriously flexible and easy to install speaker wire.

Model Shown: VLOC-2V3

V3

VLOC-2V1 25 watt per channel two channel V1 passive LOCVLOC-4V1 25 watt per channel four channel V1 passive LOCVLOC-2V2 35 watt per channel two channel V2 passive LOCVLOC-4V2 35 watt per channel four channel V2 passive LOCVLOC-2V3 75 watt per channel two channel V3 active LOC with signal-sense remote turn-onVLOC-4V3 75 watt per channel four channel V3 active LOC with signal-sense remote turn-onVLOC-6V3 High-end six channel active LOC with summing and signal-sense turn-onVLOC-8V3 High-end 8 channel LOC with summing, blending and signal-sense turn-onVGLI-2V1 Two channel ground loop isolator

V2 V1OEM Integration Devices

V3

1050-PV3 50’ spool CEA-2015 full speci�cation HEPTA�ex 1/0AWG matte blue power wire1050-GV3 50’ spool CEA-2015 full speci�cation HEPTA�ex 1/0AWG matte black ground wire04100-PV3 100’ spool CEA-2015 full speci�cation HEPTA�ex 4AWG matte blue power wire04100-GV3 100’ spool CEA-2015 full speci�cation HEPTA�ex 4AWG matte black ground wire08250-PV3 250’ spool CEA-2015 full speci�cation HEPTA�ex 8AWG matte blue power wire08250-GV3 250’ spool CEA-2015 full speci�cation HEPTA�ex 8AWG matte black ground wire12250-SPV3 250’ spool CEA-2015 full speci�cation UNI�ex 12AWG speaker wire1225-SPV3 25’ package CEA-2015 full speci�cation UNI�ex 12AWG speaker wire16250-SPV3 250’ spool CEA-2015 full speci�cation UNI�ex 16AWG speaker wire1630-SPV3 30’ package CEA-2015 full speci�cation UNI�ex 16AWG speaker wire

High-Performance Bulk Spooled Wire

V2

1050-PV2 50’ spool full speci�cation tinned CCA HEPTA�ex 1/0AWG V2 power wire1050-GV2 50’ spool full speci�cation tinned CCA HEPTA�ex 1/0AWG V2 ground wire04100-PV2 100’ spool full speci�cation tinned CCA HEPTA�ex 4AWG V2 power wire04100-GV2 100’ spool full speci�cation tinned CCA HEPTA�ex 4AWG V2 ground wire08250-PV2 250’ spool full speci�cation tinned CCA HEPTA�ex 8AWG V2 power wire08250-GV2 250’ spool full speci�cation tinned CCA HEPTA�ex 8AWG V2 ground wire12250-SPV2 250’ spool full speci�cation tinned CCA UNI�ex 12AWG V2 speaker wire1225-SPV2 25’ package full speci�cation tinned CCA UNI�ex 12AWG V2 speaker wire16250-SPV2 250’ spool full speci�cation tinned CCA UNI�ex 16AWG V2 speaker wire1630-SPV2 30’ package full speci�cation tinned CCA UNI�ex 16AWG V2 speaker wire

Premium Bulk Spooled Wire

VISIT US ON THE WEB

LIKE US ON FACEBOOK

Not all sound deadeners are created equal. Many use an asphalt blend that becomes brittle when it’s cold or melts when it’s hot. MAXXLINK utilizes a unique butyl based blend that is flexible in any climate ensuring simple installation, hot or cold. The flexible material also conforms to almost any angle and the adhesive bonds to nearly any surface.

GET CONNECTED!

V3

VSD-SK Sound deadener speaker kit - 2 x 10” x 10” piecesVSD-DK Sound deadener door kit - 4 x 12” x 36” piecesVSD-TK Sound deadener trunk kit - 5 x 18” x 32” piecesVSD-CK Sound deadener car kit - 5 x 18” x 32”, 4 x 10” x 10” & 4 x 12” x36” piecesVSD-VK Sound deadener versa kit - 1 x 18” x 32” piece

Sound Deadener

MAXXLINKAudio.com

Maxxsonics® USA, Inc. 1290 Ensell Road Lake Zurich Illinois 60047 USA Phone: 847-540-7700 FAXX: 847-540-9776

www.maxxsonics.comMB Quart,® Autotek,® Hifonics® and Crunch USA® MAXXLINK® are divisions of Maxxsonics® USA Inc.

Facebook and their trademarks are wholly owned by that company. They are in no way partners of or endorsees of Maxxsonics USA.

© 2012 Maxxsonics USA, Inc. All rights reserved. Maxxsonics, the Maxxsonics logo and other Maxxsonics trademarks including MAXXLINK are owned by Maxxsonics and may be registered in the USA and in other countries.

Visit Us On The Web @ maxxsonics.com

youtube.com/MaxxsonicsUSAInc