View
3
Download
0
Category
Preview:
Citation preview
104/2016
Meltron MEX Luminaire’s Superior Advantages and Benefits for Oil and Gas, Mining and Chemical Industry
2
Meltron MEX Luminaire for Oil&Gas, Mining and Chemical Industry
ADVANTAGES BENEFITS
ATEX / IECEx and EAC certifications!
• Certified for gas and dust explosive environments, 299 out of 301 explosive gases and conductive dusts, T5 temperature class, zones 1, 2 and 21 and 22
• Fits most hazardous areas requiring fixed lighting
• Wide operating temperature range -20 … +60°C and “e mb op is” and “tb” protections
• Luminaire structure suitable for use in extremely harsh operating conditions at moderate cost
3
Meltron MEX Luminaire for Oil&Gas, Mining and Chemical Industry
ADVANTAGES BENEFITS
Sealed polycarbonate fixture!
• Several lengths and installation options, small and lightweight sealed structure, with gore vent
• Easy to install, clean and maintain, and no risk of condensation build-up
• Good luminous efficacy, very high driver efficiency, high power factor and good EMC performance
• Cost efficient luminaire family with tested performance to ATEX, IECEx and EAC, as well as Low Voltage, EMC and RoHS directives
• Delivered with pre-installed cable, according to customer specifications
• Safe and quick to install
4
Meltron MEX Luminaire for Oil&Gas, Mining and Chemical Industry
Internal Meltron MEX LED driver unit!
• Switch-mode constant current power supply, developed by Meltron to meet the demands of the most difficult operating conditions
• Environments – integrated design process of all major luminaire components allows detailed development, measurement and analysis of the luminaire system and its performance
• Protection via encapsulation, robust driver structure, driver cooling, and very efficient electronics allow for good performance as well as long lifetimes even in very hot environments
• Low maintenance costs and long operating times
ADVANTAGES BENEFITS
5
Meltron MEX Luminaire for Oil&Gas, Mining and Chemical Industry
Specific features! • Designed and developed to withstand and fit the most challenging and hazardous environments - provides excellent performance over a long operating period
• Significant savings with operating and maintenance costs, as well as less down time compared to fluorescent lighting
• Increased safety, encapsulated protection methods to provide a high level of safety at moderate cost
• Cost efficient solution for all environments, where safety is no. 1 priority
• Low weight, wide product portfolio and mounting options, wide operating temperature range up to +60°C (T5 gas and T85C for dust)
• Highly suitable for most one-to-one replacements of old fluorescent fixtures, without the need to re-enforce suspensions or re-design lighting
Recommended