View
25
Download
0
Category
Preview:
Citation preview
Mill Preventative Maintenance
Mill Preventative Maintenance
Engine
Check the engine oil level.
Check, clean the water separator.
Check the fuel level.
Check coolant level.
Cleaning cooling fins on engine and hydraulic cooler.
Cleaning the engine.
Changing the engine oil, oil filter cartridges.
Checking, replacing generator V-belt.
Check, adjust valve clearance.
Change the fuel pre-filters cartridge.
Change the fuel filter cartridge.
Mill Preventative Maintenance
Engine (Continued)
Check fastening of engine/turbocharger/combustion air hoses.
Checking the crankcase pressure.
Intercooler, draining oil and condensation water.
Drain the sludge from fuel tank.
Battery maintenance.
Change the coolant.
Changing the injection valve.
Changing the coolant pump. (6000 Operating hours)
Changing the pressure retaining valve on the injection pump. (6000 Operating hours)
Changing the crankcase ventilation valve. (6000 Operating hours)
Service combustion air filter.
Engine conservation.
Mill Preventative Maintenance
Check engine oil. (Daily)
Mill Preventative Maintenance
Check, clean the water separator. (Daily)
Mill Preventative Maintenance
Check the fuel level. (Daily)
Mill Preventative Maintenance
Check coolant level. (50 operating hours)
Mill Preventative Maintenance
Cleaning cooling fins on engine and hydraulic cooler. (250 operating hours)
Mill Preventative Maintenance
Cleaning cooling fins on engine and hydraulic cooler. (250 operating hours) (Continued)
Mill Preventative Maintenance
Cleaning the engine. (250 operating hours)
Mill Preventative Maintenance
Cleaning the engine. (250 operating hours) (Continued)
Mill Preventative Maintenance
Changing the engine oil, oil filter cartridges. (250 operating hours)
Mill Preventative Maintenance
Changing the engine oil, oil filter cartridges. (250 operating hours) (Continued)
Mill Preventative Maintenance
Changing the engine oil, oil filter cartridges. (250 operating hours) (Continued)
Mill Preventative Maintenance
Checking, replacing generator V-belt. (250 operating hours)
Mill Preventative Maintenance
Checking, replacing generator V-belt. (250 operating hours)
Mill Preventative Maintenance
Check, adjust valve clearance. (1000 operating hours)
Mill Preventative Maintenance
Check, adjust valve clearance. (1000 operating hours) (Continued)
Mill Preventative Maintenance
Check, adjust valve clearance. (1000 operating hours) (Continued)
Mill Preventative Maintenance
Change the fuel pre-filters cartridge. (1000 operating hours)
Mill Preventative Maintenance
Change the fuel pre-filters cartridge. (1000 operating hours)
Mill Preventative Maintenance
Change the fuel pre-filters cartridge. (1000 operating hours)
Mill Preventative Maintenance
Change the fuel filter cartridge. (1000 operating hours)
Mill Preventative Maintenance
Change the fuel filter cartridge. (1000 operating hours) (Continued)
Mill Preventative Maintenance
Check fastening of engine/turbocharger/combustion air hoses. (1000 operating hours)
Mill Preventative Maintenance
Checking the crankcase pressure. (1000 operating hours)
Mill Preventative Maintenance
Checking the crankcase pressure. (1000 operating hours) (Continued)
Mill Preventative Maintenance
Intercooler, draining oil and condensation water. (1000 operating hours)
Mill Preventative Maintenance
Drain the sludge from fuel tank. (1000 operating hours)
Mill Preventative Maintenance
Battery maintenance. (1000 operating hours)
Mill Preventative Maintenance
Battery maintenance. (1000 operating hours) (Continued)
Mill Preventative Maintenance
Battery maintenance. (1000 operating hours) (Continued)
Mill Preventative Maintenance
Change the coolant. (2000 operating hours)
Mill Preventative Maintenance
Change the coolant. (2000 operating hours) (Continued)
Mill Preventative Maintenance
Service combustion air filter. (As required)
Mill Preventative Maintenance
Service combustion air filter. (As required) (Continued)
Mill Preventative Maintenance
Service combustion air filter. (As required) (Continued)
Mill Preventative Maintenance
Service combustion air filter. (As required) (Continued)
Mill Preventative Maintenance
Service combustion air filter. (As required) (Continued)
Mill Preventative Maintenance
Engine conservation. (As required)
Mill Preventative Maintenance
Hydraulic System
Check the hydraulic oil level.
Check fluid level in pump drive gear.
Changing the hydraulic oil.
Change the hydraulic oil filters.
Change the oil in the pump drive gear.
Mill Preventative Maintenance
Check the hydraulic oil level. (Daily)
Mill Preventative Maintenance
Check the hydraulic oil level. (Daily) (Continued)
Mill Preventative Maintenance
Check fluid level in pump drive gear. (50 operating hours)
Mill Preventative Maintenance
Change the hydraulic oil. (1000 operating hours)
Mill Preventative Maintenance
Change the hydraulic oil. (1000 operating hours) (Continued)
Mill Preventative Maintenance
Change the hydraulic oil. (1000 operating hours) (Continued)
Mill Preventative Maintenance
Change the hydraulic oil filters. (1000 operating hours)
Mill Preventative Maintenance
Change the hydraulic oil filters. (1000 operating hours) (Continued)
Mill Preventative Maintenance
Change the hydraulic oil filters. (1000 operating hours) (Continued)
Mill Preventative Maintenance
Change the oil in the pump drive gear. (1000 operating hours)
Mill Preventative Maintenance
Change the oil in the pump drive gear. (1000 operating hours) (Continued)
Mill Preventative Maintenance
Water Spray System
Check water level, spray nozzles.
Clean water tank and filter.
Water spray system maintenance in case of frost.
Clean the pressure cleaner water filter.
Mill Preventative Maintenance
Check water level, spray nozzles. (Daily)
Mill Preventative Maintenance
Clean water tank and filter. (As required)
Mill Preventative Maintenance
Clean water tank and filter. (As required) (Continued)
Mill Preventative Maintenance
Water spray system maintenance in case of frost. (As required)
Mill Preventative Maintenance
Water spray system maintenance in case of frost. (As required) (Continued)
Mill Preventative Maintenance
Water spray system maintenance in case of frost. (As required) (Continued)
Mill Preventative Maintenance
Clean the pressure cleaner water filter. (As required)
Mill Preventative Maintenance
Drum and Tools
Check/replace cutting tools scraper.
Checking, replacing the milling drum v-belt.
Change the oil in the milling drum gear unit.
Oil change in milling drum bearing.
Mill Preventative Maintenance
Check/replace cutting tools scraper. (Daily)
Mill Preventative Maintenance
Check/replace cutting tools scraper. (Daily) (Continued)
Mill Preventative Maintenance
Check/replace cutting tools scraper. (Daily) (Continued)
Mill Preventative Maintenance
Check/replace cutting tools scraper. (Daily) (Continued)
Mill Preventative Maintenance
Check/replace cutting tools scraper. (Daily) (Continued)
Mill Preventative Maintenance
Check/replace cutting tools scraper. (Daily) (Continued)
Mill Preventative Maintenance
Check/replace cutting tools scraper. (Daily) (Continued)
Mill Preventative Maintenance
Check/replace cutting tools scraper. (Daily) (Continued)
Mill Preventative Maintenance
Check/replace cutting tools scraper. (Daily) (Continued)
Mill Preventative Maintenance
Check/replace cutting tools scraper. (Daily) (Continued)
Mill Preventative Maintenance
Check/replace cutting tools scraper. (Daily) (Continued)
Mill Preventative Maintenance
Check/replace cutting tools scraper. (Daily) (Continued)
Mill Preventative Maintenance
Checking, replacing the milling drum v-belt. (250 hours)
Mill Preventative Maintenance
Checking, replacing the milling drum v-belt. (250 hours) (Continued)
Mill Preventative Maintenance
Change the oil in the milling drum gear unit. (1000 hours)
Mill Preventative Maintenance
Oil change in milling drum bearing. (1000 hours)
Mill Preventative Maintenance
Tracks
Checking the track plates.
Retightening the track shoe fastening screws.
Checking the track drive.
Checking the track links.
Oil change in track drive gear.
Mill Preventative Maintenance
Checking the track plates. (Daily)
Mill Preventative Maintenance
Retightening the track shoe fastening screws. (50 operating hours)
Mill Preventative Maintenance
Checking the track drive. (250 operating hours)
Mill Preventative Maintenance
Checking the track drive. (250 operating hours) (Continued)
Mill Preventative Maintenance
Checking the track drive. (250 operating hours) (Continued)
Mill Preventative Maintenance
Checking the track drive. (250 operating hours) (Continued)
Mill Preventative Maintenance
Oil change in track drive gear. (1000 operating hours)
Mill Preventative Maintenance
Conveyor s
Check, tighten conveyor belts.
Check the condition of the safety ropes.
Mill Preventative Maintenance
Check, tighten conveyor belts. (Daily)
Mill Preventative Maintenance
Check, tighten conveyor belts. (Daily) (Continued)
Mill Preventative Maintenance
Check, tighten conveyor belts. (Daily) (Continued)
Mill Preventative Maintenance
Check the condition of the safety ropes. (Daily)
Mill Preventative Maintenance
Lubricate the Machine
Loading conveyor belt.
Gathering belt.
Milling Drum.
The articulation cylinder.
The scraper plate.
Steering tie rods.
Steering cylinder bearings.
Column to track pin.
Post bushings.
Folding linkage to unloading conveyor or belt.
Loading conveyor belt.
Mill Preventative Maintenance
Lubricate the Machine (Continued)
Gathering belt.
Milling drum drive clutch.
Mill Preventative Maintenance
Loading conveyor belt. (Daily)
Mill Preventative Maintenance
Gathering belt. (Daily)
Mill Preventative Maintenance
Milling drum. (Daily)
Mill Preventative Maintenance
The articulation cylinder. (50 operating hours)
Mill Preventative Maintenance
The scraper plate. (50 operating hours)
Mill Preventative Maintenance
The steering tie rods. (50 operating hours)
Mill Preventative Maintenance
The steering cylinder bearings. (50 operating hours)
Mill Preventative Maintenance
The column to track pin. (50 operating hours)
Mill Preventative Maintenance
The post bushings. (50 operating hours)
Mill Preventative Maintenance
Folding linkage to unloading conveyor or belt. (50 operating hours)
Mill Preventative Maintenance
Loading conveyor belt. (250 operating hours)
Mill Preventative Maintenance
Gathering belt. (250 operating hours)
Mill Preventative Maintenance
Milling drum drive clutch. (250 operating hours)
Mill Preventative Maintenance
Tightening Torques
Mill Preventative Maintenance
Recommended