View
8
Download
0
Category
Preview:
Citation preview
modulowo.com Dokumentacja techniczna: tech.modulowo.com/76
Modulowo® Explore™ E for Intel® Edison
MOD - 76
compatible with Modulowo® DuoNectTM
Modułowo sp. z o.o. ul. Mokotowska 1, 00-640 Warsaw, Poland, info@modulowo.com, T.: +48 530 919 264 VAT ID (NIP): PL7010430823, NACE (REGON): 147346658, NCR (KRS): 0000516646
modulowo.com | Store | Blog | Academy | Applications and projects | Technical documentation
Designed by Modułowo® with
modulowo.com Technical Documentation: tech.modulowo.com/76
MOD - 76 Modulowo® Explore™ E for Intel® Edison
Modulowo® Explore™ E is the development kit, breakout board for Intel® Edison Compute
Module (with dual-core Intel® Atom™, Wi-Fi and Bluetooth LE), designed for easy development
of Internet of Things projects (IoT), compatible with Arduino*, Linux, C, C ++, Python, and JavaScript.
Board enables easy extension of compute module with additional modules, such as sensors,
touch switches, motor controllers and LED drivers, communication modules, GPS and much more.
Modulowo® Explore™ E can be used to learn programming, education, prototyping and production
of new solutions.
Modulowo® Explore E™ includes a connector for Intel® Edison platform, two Modulowo®
duoNECT™ connectors for expansion modules – Modulowo® Explore™, GPIO, SPI, UART and I2C
interfaces connectors, two micro USB (USB OTG and USB/UART converter), 12-bit Analog-to-digital
converter (optional 16-bit) for measuring analog signals, voltage logic level translators (tolerates
+3,3V/+5V signals), battery charger (only for Intel ® Edison) and connector for additional power
supply for expansion modules.
Note!
V_SEL +3.3V/+5V jumper to select of supply voltage and digital signals. Standard setting is + 3.3V.
YOUR LIST OF MODULES After logging in to modulowo.com/list, just enter unique Serial Number and add the module to your own list. This will
allow quick access to the documentation and examples. Card with Serial Number is included with each module.
modulowo.com Technical Documentation: tech.modulowo.com/76
MOD - 76 Modulowo® Explore™ E for Intel® Edison
Technical Specifications
connector for Intel® Edison, characterized by:
- Dual-core Intel® Atom
- Single-core microcontroller
- WiFi*
- Bluetooth* Low-Energy (BLE) 4.0
- RAM 1 GB
- 4GB flash memory
two connectors Modulowo® DuoNectTM for expansion modules
16 GPIO pins (2.54 mm pitch)
additional connectors communication interfaces (2.54 mm pitch)
- 4 x I2C
- 1 x UART
- 1 x SPI
2 micro USB connector, including USB OTG
4 analog channels of 12-bit (supported by the ADS1015 ADC with I2C address SMD jumper)
logic level jumper +3.3V/+5V
power from the micro USB connector
Battery Charger (Li-Ion, Li-Polymer) only for Intel® Edison, MCP73831
USB/UART converter for serial communication with compute module
translators of logic levels + 3.3V/+5V
+3.3V 500mA voltage regulator for expansion modules
pin current limit: 10 mA each
dimensions: ~ 88.5 mm x 60.0 mm
RoHS
Full specs:
tech.modulowo.com/76
modulowo.com/intel-edison
modulowo.com Dokumentacja techniczna: tech.modulowo.com/76
Pinout
Intel® Edison Arduino*
GP130 RX D0 RX
GP131 TX D1 TX
GP128 D2
GP12 D3
GP129 D4
GP13 D5
GP182 D6
GP48 D7
GP49 D8
GP183 D9
GP41 D10
GP43 D11
GP42 D12
GP40 D13
GP44 D14
GP45 D15
GP46 D16
GP47 D17
GP27 SCL
SCL
GP28 SDA
SDA
GP110 RESET
GP114 MISO
MISO
GP115 MOSI
MOSI
GP109 SCK
SCK
VIN_DN
du
oN
ECTTM
S
LOT
0 GND
+3,3V +5V
GND GP129
TX MOSI
RX MISO
A0 SCK
GP13 GP49
SDA GP12
SCL GP1831
VIN_DN
du
oN
ECTTM
S
LOT
1 GND
+3,3V +5V
GND GP41
TX MOSI
RX MISO
A0 SCK
GP182 GP48
SDA GP128
SCL GP1831
GND
SDA
SCL
A0 A3
V_IO GND
A1 A0
A2 A1
A3 A2
RX TX
SCL SDA
SCL SDA
SCL SDA
SCL SDA
GP43 GP42
GP42 GP40
GP40 GP43
V_IO_SEL
+5V
V_IO
+3,3V
V_I
O
MO
SI
GN
D
MIS
O
SCK
GP
11
0
GP44 GP47
V_IO GND GP47 GP46
GP46 GP45
GP45 GP44
MOD - 76 Modulowo® Explore™ E for Intel® Edison
VIN_DN
+5V
GND
GND
V_BAT
GND
TX LED
RX LED
1 shared pin
modulowo.com Dokumentacja techniczna: tech.modulowo.com/76
MOD - 76 Modulowo® Explore™ E for Intel® Edison
Power and communication
It is recommended to use both micro USB connector to power.
USB SERIAL – power connector, serial communication
with Intel® Edison (BAUDRATE 115200)
USB OTG – power connector, battery charging,
communication with the use of Arduino IDE and OTG mode
There is an optional power connector VIN_DN/+5V/GND,
mainly for additional power supply for expansion modules.
Logic level configuration
V_IO_SEL jumper is used to select V_IO line voltage and signals
logic level.
Note! The default setting V_IO_SEL to + 3.3V. There are two
interdependent jumper in SMD and THT.
If you are using one of them, the other must be disconnected.
Installation of expansion modules
1
2
3
1
2
3
!
Extension modules can be mounted by:
pin connector (2.54 mm pitch)
Note! It is used 8 of 9 pins.
(VIN_DN and GND are not used)
castellated edges
1
2
2
1
modulowo.com Technical Documentation: tech.modulowo.com/76
MOD - 76 Modulowo® Explore™ E for Intel® Edison
Note! In the case of pin connector
assembly, extreme pins (VIN_DN,GND)
are not used.
12
10
15
Ter
m o
f U
se h
ttp
://m
od
ulo
wo
.co
m/t
erm
s-o
f-u
se M
od
uło
wo
ass
um
es n
o li
abil
ity
or
resp
on
sib
ilit
y f
or
any
err
ors
or
inac
cura
cies
th
at m
ay a
pp
ear
in t
his
do
cum
ent.
Mo
du
łow
o m
ay m
ake
cha
nge
s to
spec
ific
atio
ns
and
pro
du
ct d
escr
ipti
on
s at
an
y t
ime,
wit
ho
ut
no
tice
. *N
ames
an
d m
ark
s ex
tern
al c
om
pan
ies
are
use
d f
or
info
rmat
ion
al p
urp
ose
s o
nly
. Co
pyr
igh
t ©
20
15
Mo
du
łow
o®
. All
rig
hts
res
erv
ed.
Installation of pin connectors
`
Modulowo® DuoNectTM Solution (more modulowo.com/duonect)
Pinout Standard
and constant width
+3,3V/+5V signals tolerant Compatible with breadboard
Adapters for development
platforms
Several ways to connect castellated edges or pin connector
DOCUMENTATION
tech.modulowo.com/76
modulowo.com/intel-edison
More materials, software, articles, blog and technical support
modulowo.com
Mo
du
low
o®
Exp
lore
TM
VIN
+3.3V
GND
RX
TX
AN
PWM
SDA
SCL
GND
+5V
CS
MOSI
MISO
SCK
RST
INT
ID/1W
Recommended