MODULE 1 UNIT 3

HazMat Operations Unit 3 slide 1

MODULE 1UNIT 3

Basic Hazardous Materials Terms

HazMat Operations Unit 3 slide 2

Unit 3 Learning Objectives

At the conclusion of this unit the student will define the terminology used for appropriate assessment of a hazardous material. The Student will use learned terminology when referencing resource books for further assessment.

HazMat Operations Unit 3 slide 3

Student Performance Objectives

• Describe the three physical states of matter• Describe the terminology related to material

characteristics.• Describe the terms “lower explosive limit”

and “upper explosive limit”.• Describe the process used to identify the “pH”

of a material.• Describe the reactivity terms of materials.

HazMat Operations Unit 3 slide 4

Terminology

• Physical Properties Terms• Flammability Terms• Corrosivity Terms• Toxicity Terms• Reactivity Terms

HazMat Operations Unit 3 slide 5

Physical Properties Terms• Physical State• Appearance• Boiling Point• Chemical Reactivity• Melting Point

HazMat Operations Unit 3 slide 6

Physical Terms (cont.)

• Water Solubility• Specific Gravity• Vapor Density• Vapor Pressure

HazMat Operations Unit 3 slide 7

Flammability Terms

• Auto-ignition Temperature• Flash Point• Lower Explosive Limit• Upper Explosive Limit

HazMat Operations Unit 3 slide 8

Corrosivity Terms• Corrosive/Corrosive Material• pH• Acid• Alkali (Base)

HazMat Operations Unit 3 slide 9

Toxicity Terms

• Toxicology• Acute Effect• Chronic Effect• Allergic Reaction• Asphyxiant

HazMat Operations Unit 3 slide 10

Toxicity Terms (cont.)

• Carcinogen• Irritant• Sensitizer• Convulsant

HazMat Operations Unit 3 slide 11

Toxicity Terms (cont.)• LC50• LD50• TLV TWA• PEL• STEL

• C• IDLH • Toxic Products of

Combustion

HazMat Operations Unit 3 slide 12

Reactivity Terms

• Explosive• Pyrophoric (Air Reactive)• Polymerization• Water Reactive• Hypergolic

HazMat Operations Unit 3 slide 13

Unit 3 Review Quiz