View
244
Download
4
Category
Preview:
Citation preview
Motion SPM® Module Portfolio
fairchildsemi.com/spm
Fairchild’s Motion SPM® Smart Power Modules combine years of expertise in power semiconductor technology, advanced packaging techniques, and application knowledge to create solutions for motor control and industrial inverter applications. By integrating motor drive and protection circuitry into a single package, SPM modules simplify and accelerate your system design and help optimize efficiency. SPM modules provide full-featured, high-performance three-phase inverter output stage and optimized gate drive technology to minimize EMI and losses, and provide multiple on-module protection features.
The built-in one HVIC translates the incoming logic-level gate inputs to the high-voltage, high-current drive signals required to properly drive the module’s internal MOSFETs or IGBTs. Three separate open-source / open emitter terminals are available for each phase to support the widest variety of control algorithms.
Fairchild’s portfolio ranges from 40V to 1200V and supports from 20W to 7.5 kW providing design scalability to further reduce time to market. A wide variety of packaging options helps designers reduce form factors. Integrated SPM modules cover motor drive applications from small fan motors, pumps, power tools, and home appliances to high-power air conditioning units and industrial drives.
Discrete Component Integration:• Optimized system cost ° Higher manufacturability ° Board/PCB space saving ° Easy management ° Reduced development time• Reduce failure rate in manufacturing
Increase Reliability and Reduce Design Time
SPM Advantages:• Widest breadth of packaging for motor control
applications (below 10 HP)• Optimized packaging for thermal performance,
high-power density, and robust assembly• Wide range of guaranteed junction temperature
-40°C to +150°C• Packages with more creepage/clearance
for high-voltage applications• Better ruggedness, optimized conduction and switching
losses increase reliability and reduce design time
2Motion SPM® Module Portfolio Fairchild Semiconductor
Improving Energy Efficiency and Reliability for Motor Control ApplicationsAs demands increase for energy efficiency, environmental responsibility, and meeting government regulations, the need for highly efficient electronic systems becomes even more critical. Electric motors are the single largest consumer of electrical power—accounting for between 40 to 50 percent of total global energy consumption— so it is essential that motor control solutions to be both efficient and reliable.
Critical Design Factors and Challenges for Motor Control Architectures:• Efficiency• Reliability• Noise reduction• Thermal performance• Reduced board space• Ease of design
SPM® Motor Control
Innovative SPM® Solutions for Motor Control ApplicationsOur constantly expanding product portfolio—combined with manufacturing process enhancements innovative topologies, and systems expertise—allows circuit designers to develop the most advanced solutions to meet these needs. Fairchild’s broad portfolio of Motion SPM power modules delivers the right solution for any motor control application. SPM modules are supported by design tools, reference designs, and evaluation boards to simplify and shorten your design cycle.
DAC ADC
Sine/Square
Ctrl
SMPS
Ctrl
Motor DriverPFCBridge Recti�er
Motor
OptoelectronicsBLDC / PMSM Controller
Auxilary Power Part
Smart Power Module
HVICDriver
Motor Control System
3Motion SPM® Module Portfolio Fairchild Semiconductor
Motion SPM® Module Series
SPM 2 Series
600V and 1200V SPM 2 module series covers up to 10 kW three-phase inverterized motor drive applications. Reliability reinforced using the latest NPT and field-stop trench IGBTs with DBC package technologies that achieve greater than 10% reduction in module losses with longer short-circuit rating capabilities and embedded protection circuits. Design conveniences include simple heat sink attachment and component reductions.
Typical Applications: HVAC, Industrial inverter/servo motors, pumps, fan motors
Features: • UL Certified No. E209204 (UL1557)• NPT trench IGBTs with low power loss• Enhanced functions with built-in bootstrap diode
and NTC thermistor• Better reliability with higher noise and surge immunity• Better thermal performance with DBC substrate
0.8°C/W (max)• Design conveniences: full circle screw hole,
no side dummy
SPM 3 Series
500V, 600V, and 1200V SPM 3 module series covers a wide range of power applications up to 3 kW. Separate open emitter terminals are available for each phase to support the widest variety of control algorithms. SPM 3 modules are offered in very low thermal resistance packaging AL2O3 DBC, ceramic substrate, and full Pak options.
Typical Applications: HVAC, commercial air conditioner, compact industrial level inverter, servo-driver, fan motor, pumps, AC Induction, BLDC, and PMSM motor types
Features: • UL Certified No. E209204 (UL1557)• NPT planar and trench IGBTs with low power loss• Enhanced functions with built-in bootstrap diode and
thermal sensing unit (TSU) • Better reliability with higher noise and surge immunity• Better thermal performance with DBC substrate
1.1°C/W (max)• Expanded current rating up to 50A
HVIC
VS
VS
OUT
IN
VCCCOM
HVIC
VS
VS
OUT
IN
VCCCOM
HVIC
VS
VS
OUT
IN
VCCCOM
LVIC
OUT
OUT
OUT
IN
IN
IN
COM
VCC
CSCCFOD
VFO
Thermistor
P (1)
W (2)
V (3)
U (4)
NW (5)
NV (6)
NU (7)
RTH (8)
VTH (9)
18 RSC
COM
VS
VS
OUT
IN
VCC
COM
VS
VS
OUT
IN
VCC
COM
VS
VS
OUT
IN
VCC
IN
IN
IN
COM
VCC
OUT
OUT
OUT
CSCCTSVFO
P (27)
V (25)
W (26)
U (24)
NW (27)
NV (22)
NU (21)
See the portfolio at fairchildsemi.com/spm2
See the portfolio at fairchildsemi.com/spm3
4Motion SPM® Module Portfolio Fairchild Semiconductor
SPM 45 Series
600V SPM 45 module series provides compact and high-performance inverter solutions for AC motor drives in lower power applications, up to 2 kW. The series targets cost-sensitive applications below 30A in ceramic substrate packaging with built-in bootstrap diodes. System reliability is further enhanced by built-in NTC for temperature monitoring, integrated under-voltage lock-out function and over-current protection input. Three separate open-emitter pins for low-side IGBTs enable three leg current sensing and built-in bootstrap diodes and dedicated Vs pins make PCB layout easy.
Typical Applications: Appliance inverters (such as residential A/C), Washing machines, Refrigerators, Pumps, Industrial fans, Compact inverters
Features: • UL Certified No. E209204 (UL1557)• NPT and NS planar and advanced FS3 trench IGBTs
with low power loss• Enhanced functions with built-in bootstrap diode
and NTC thermistor • Better reliability with higher noise and surge immunity• Better thermal performance down to 1.9°C/W (max)• Expanded current rating up to 30A
SPM 55 Series
600V SPM 55 modules provide a fully-featured, high-performance inverter output stage for lower power AC Induction, BLDC, and PMSM motors, up to 1 kW. The built-in, high-speed HVIC requires only a single supply voltage and translates the incoming logic-level gate inputs to the high-voltage, high-current drive signals required to properly drive the modules’ robust short-circuit-rated IGBTs. Separate negative IGBT terminals are available for each phase to support the widest variety of control algorithms. Due to tighter regulatory control, fan motors are also expanding to inverter solutions for higher efficiency while demanding increased reliability.
Typical Applications: Appliance inverters (such as residential A/C), Washing machines, Refrigerators
Features: • UL Certified No. E209204 (UL1557)• Advanced FS3 trench IGBTs with low power loss• Diversified switching speed options (normal/fast/ultra-fast)• Integrated bootstrap diode• Enhanced protection functions with interlock,
TSU and TSD, shutdown • Better reliability with higher noise and
surge immunity
Thermistor
UVB
UVS
VVB
WVS
VVB
VVS
IN (UH)
IN (VH)
IN (WH)
VCC
COM
OUT (UH)
UVS
OUT (VH)
VVS
OUT (WH)
WVS
VCC
COM
OUT (UL)
OUT (VL)
OUT (WL)
IN (UL)
IN (VL)
IN (WL)
VFO
C(SC)
VBHINLIN
VBHINLIN
VBHINLIN
HO
VS
LO
HO
VS
LO
HO
VS
LOVDDCOM
CSCVF
See the portfolio at fairchildsemi.com/spm45
See the portfolio at fairchildsemi.com/spm55
5Motion SPM® Module Portfolio Fairchild Semiconductor
SPM 5 Series
250V, 500V, and 600V SPM 5 module series provides optimized gate drive to minimize EMI and losses for less than 200W, three-phase motor drive applications Modules are offered in three package options – DIP, double DIP, and SMD. Separate open-source MOSFET terminals are available for each phase to support the widest variety of control algorithms.
Typical Applications: Dishwashers, ceiling fans, pumps, fans for lower power air conditioners
Features: • UL Certified No. E209204 (UL1557)• FRFET MOSFET three-phase inverter with gate drivers
and protection• Standard package options – DIP, double DIP, SMD• Better ruggedness with superior SCWT
>30 µsec in worst conditions• Enhanced functions with built-in bootstrap diode
and TSU function • Better reliability with higher noise and surge immunity
SPM 7 Series
Advanced SPM 7 (250V, 500V, 600V) modules provide fully-featured, high-performance three-phase inverter output stage for AC Induction, BLDC, and PMSM motors. These modules integrate optimized gate drive of the built-in MOSFETs to minimize EMI and losses while also providing multiple protection features. The built-in HVIC translates incoming logic-level gate inputs to the high-voltage, high-current drive signals required to properly drive the module’s internal MOSFETs. Separate open-source MOSFET terminals are available for each phase to support the widest variety of control algorithms. PQFN package offers up to 50% board space savings while minimizing EMI and losses.
Typical Applications: Small pumps, pedestal and ceiling fans <100W
Features: • UL Certified No. E209204 (UL1557)• FRFET MOSFET three-phase inverter• Cost-competitive PQFN package • Extremely low R
θJ-CB 0.8°C/W (heat dissipation by PCB pattern)
• Enhanced protection functions with UVLO, OCP, Interlock, TSU
• Better reliability with higher noise and surge immunity
OUT (UH)
VS(U)
OUT (VH)
VS(V)
OUT (WH)
VS(W)
OUT (UL)
OUT (VL)
OUT (WL)
VB(U)
VB(V)
VB(W)
VDDCOM
UHVH
WH
UL
VL
WL
/Fo
VTS
CfodCsc
VCC
HIN
LIN
COM
VCC
HIN
LIN
COM
VCC
HIN
LIN
COM
VTS
VB
HO
VS
LO
VB
HO
VS
LO
VB
HO
VS
LO
VB
HO
VS
LO
See the portfolio at fairchildsemi.com/spm5
See the portfolio at fairchildsemi.com/spm7
PB4000-010
Silicon Valley Headquarters
Fairchild Semiconductor
3030 Orchard Parkway
San Jose, CA 95134
U.S.A.
dir +1 408-822-2000
fairchildsemi.com
Corporate Offices
Fairchild Semiconductor
82 Running Hill Road
South Portland, ME 04106
U.S.A.
dir +1 207-775-8100
fairchildsemi.com
Fairchild Semiconductor
Asia Pacific Pte Ltd.
54 Serangooon North Ave 4
#02-01
Singapore 555854
dir +65 6496-8888
Fairchild Semiconductor GmbH
Europe - Germany
Einsteinring 28
85609 Aschheim / Muenchen
Germany
dir +49 8999 8876 0
© 2015 Fairchild Semiconductor. Fairchild Semiconductor and the Fairchild logo design are registered trademarks of Fairchild Semiconductor in the U.S. and other countries. All other trademarks are the property of their respective owners. All rights reserved.
For design resources and detailed information on all of the SPM modules, visit fairchildsemi.com/spm
Module Packaging Options by Series
Application
Industrial Drives
Fan Motors
HVAC / System A/C
Low-PowerResidential A/C
Refrigerators
Washing Machines
Small IndustrialInverters & Pumps
Dishwashers
5 kW 3 kW 1 kW 100W50W
High-Power Residential A/C
Small Pumps SPM 5 600V/~3.6A 500V /~2.0A250V /~3.6A
Power Tools
SPM 2 V1 and V2 600V / 30A ~ 75A 1200V / 10A, 25A, 35A, 50A
SPM 3 600V / ~ 30A 1200V/10A, *15A
SPM 55 600V /5A, 10A, 15A
Application-speci�c module products from 20W ~ 7.5 kW
SPM 45H 600V /~20A
SPM 7 500V / ~1.8A250V / ~2.5A
10 kW
SPM 45L 40V / 40A ~ *60A
20W
Power Rating
SPM Motor Control Module Portfolio
Motion SPM® Module Portfolio
Recommended