MTK Flashing Proceduremtk-p.micromaxinfo.com/common_tools/Generic/MTK/Documents/Fl… · MTK...

MTK Flashing Procedure

1. USB Drivers Installation

Step1: Ensure the battery level is above 50% charged

Step2: Turn OFF the phone

Step3: Install the drivers required for flashing

NOTE: Driver available on MTK-P may be newest version, so install accordingly.

Run Driver EXE file Select English Language

MTK Flashing Procedure

Please wait for preparing setup and click on next once finished

MTK Flashing Procedure

Click on next

MTK Flashing Procedure

Please wait for driver’s installation

Below screen may appear, please select Install this driver software anyway

Driver setup completed, please click on next

MTK Flashing Procedure

Flashing Procedure:

Latest Software must available in system and extract the software file

Open Flash tool SP_Flash_Tool_v5.1352.01 or latest folder and run Flash_tool.exe

Below screen will appear

MTK Flashing Procedure

Click on Scatter-Loading and go to software folder > select scatter file

Below screen may appear, please wait till processing complete

MTK Flashing Procedure

Below screen will appear, Click on Download only and select > Firmware upgrade only

Caution: Don’t select other options, Handset may dead with below Mota SIU Like

Format All + Download

Note: If handset flashing not succeeded with Firmware upgrade, Please try download only

option

MTK Flashing Procedure

Select Firmware upgrade only and select on Download button I. Handset must in switch Off condition

II. Insert battery

III. Connect USB data cable 3

Below error may appear

Click on stop & disconnect the handset

MTK Flashing Procedure

Again Select Firmware upgrade only and select on Download button I. Handset must in switch Off condition

II. Insert battery

III. Connect USB data cable 3

Below error may appear

Click on OK Click on stop in Flash Tool & disconnect the handset

Again Select Firmware upgrade only and select on Download button I.

Handset must in switch Off condition

II. Insert battery

III. Connect USB data cable 3

MTK Flashing Procedure

Flashing will start, refer below

Thanks For any Query or suggestion, Please write to tech.help@micromaxinfo.com