N ET M AX – System Controller N8000 System Controller Hardware 32 audio channels on 4 audio slots...

NNETETMMAXAX – – System System ControllerController

N8000 System Controller Hardware• 32 audio channels on 4 audio slots• Audio network port with 32 In / 32 Out• 8 channel analog audio input / output cards• Optional digital I/O cards (AES/EBU, SPDIF)• Optional audio network card (CobraNet).

Modular DSP Design

32 Digital Input Channels on 4 Internal Busses

32 Digital Output Channels on 4 Internal Busses

300 MIPS DSP horsepower onboard

Expandable to 600 MIPS

more than 1000 EQ-Filters

Audio FeaturesAudio Features

Drag-and-Drop DSP• CAD Style DSP

Configuration• Autocompiler• DSP Resource Meter• Real-time Control of

DSP Modules

Dedicated Loudspeaker DSP• Single DSP block for

Loudspeaker Processing

• 2-way, 3-way, 4-way, 5-way, Mono or Stereo

• Import and Export EV Loudspeaker Presets Directly into DSP

Mixer/Router Options

Multiple Options For Audio Routing including:

• Mixers• Matrices• Routers• Priority Matrices

For Connection to ProAnnounce Systems

Multiple EQ Options

A Variety of EQs, including:

• 31-Band Graphic• Parametric• N Band PE• Tone Controls• Shelves,

Highpass, Lowpass, Allpass and Notch Filters

Integrated Web Server

Remote Connection, Configuration and Administration Using Any Web Browser

Integrated Web Server

Sophisticated Macro Level Programming with Conditional Triggering and Scheduling of Events

TCP/IP Ethernet Control port for LAN/WAN control

USB Control port for local PC control

2 x RS232 port for Touch-panel control

GPIO ports for AUX switching devices

CAN port for remote access to EV’s RL & RT

amplifiers

Full support of redundancy in emergency call

related systems.

Control FeaturesControl Features

FrontpanelFrontpanelLEDs / USB-portLEDs / USB-port

AUDIO CHANNEL LEDs:Volume monitor for input and output signalsSIGNAL: green, >-25 dBuPEAK: red, 18 dBu, 3 dB space.

FrontpaneFrontpanell

LEDsLEDsNETWORK LEDs:ACTIVE: blinking or permanent on means data transfer via CobranetMASTER: one of the network partners is automatically the master of the network.

SYSTEM STATUS LEDs:Show status of unit and systemREADY is on after booting and shows satisfying operationFAULT shows error in unit or system.

POWER LED:Shows the unit is switched on.

USB-connector:Connection to a PC when unit is assembled in a rack.

RearpanelRearpanelAUDIO SLOTSAUDIO SLOTS

Module AI-18 channel-line-inputsElectronically balanced Gain and pad software controllableDynamic range 117 dBAutomatic configuration

ModulesModulesAI-1AI-1

Module AO-18 channel-line-outputs 100 OhmsElectronically balanced 21 dBu output levelDynamic range 118 dBOutput relaysAutomatic configuration.

ModulesModulesAO-1AO-1

ModulesModulesAO-1 AO-1 AI-1AI-1MI-1MI-1

ModulesModulesAO-1 AO-1 AI-1AI-1MI-1MI-1

RearpanelRearpanelCobraNet slotCobraNet slot

Module CM-1Cobranet Digital Audio Network Interface 100BASE-TX Ethernet InterfaceSecondary 100BASE-TX Ethernet InterfaceMax 32 digital audio channels via 4 ports inMax 32 digital audio channels via 4 ports outStatus LEDs.

ModulesModulesCM-1CM-1

CobraNet primary / secondary Port:Left LED: Green: link ok, communication activeRed: faultRight LED: Green: interface in useOrange: Device is Cobranet Conductor.

ModulesModulesCM-1CM-1

ModulesModulesCM-1CM-1

ModulesModulesCM-1CM-1

RearpanelRearpanelMainframe Mainframe

ConnectionsConnections

Ethernet Interface:RJ45 Ethernet connector for 100 BASE-TX / 10 BASE-T networks.

RearpaneRearpanellMainframe Mainframe

ConnectionsConnections

RS 232-Ports:For connection of the N8000 with external devices like multimedia systems, building management systems, or PROANNOUNCE managerASCII-string protocol easy to implementConfiguration of ports via IRIS - Software Direct communication with PC via terminal program possible.

Remote-CAN Bus:Connection to EV Remote Controlled Amplifiers or other units with CAN interfaceConnectors are in parallelSTATUS led: shows activity at the CAN bus.

GPIO Control Port:4 inputs 0 .. 10 V freely programmable Can be used as digital (on/off) or analog (e. g. volume control) inputDigital inputs: 0V = low, 10 V = highAnalog inputs: via potentiometer 0 .. 10 V or from multimedia system.

GPIO Control Port:4 logical outputs, relay contacts SPSTOut 1 potential free for fault signalisationOut 2..4 referenced to ground,+5V output can be used to operate external relays or LEDs with max 200 mA.

Network TopologyThese distributors are called hubs or switches.

A hub sends all the signals to every connection.A switch is more intelligent and sends the data packets only to the

destination where they are needed.

star network.

Network Topology

There are more complex networks (e. g. ring topologies) that are possible. These must be realised with managed

switches. With these networks, higher safety and redundancy is possible.

Keywords in these types of networks are Rapid Spanning Tree– protocol, V-lan, Wireless Lan.

Network structures for typical stadium sound systems

From the nonredundant minimum solution to the maximum redundant

network.

Redundant networks

Redundant networks

Redundant networks

Specifics to Observe with CobraNet

The audio data is distributed via Bundles. In one bundle, a maximum of 7 audio channels with 24 bit audio or 8 audio

channels with 20 bit audio can be transported .

CobraNet is a supplement to Ethernet. Because of the popularity of Ethernet, all components are cheap and available in a wide variety. Way to move audio data over Cat5(6) or Fiber networks.

CobraNet

The CobraNet-bundle

Specifics to Observe with CobraNet

The capacity of units working with Cobranet is measured in these bundles (for example, the N8000 can receive 4

bundles and can transmit 4 bundles)

It is important to calculate the necessary bandwidth before starting a project. For that there is the PC program

CobraCad.

In NetMax we have the possibility to exchange data with a PROMATRIX – system

The following features can be realised:

announcement/alarm into different Areas

announcement/alarm into different sectors of a PROSOUND area

audio signal from local or networking (RS485) DPM 4000

transmission of different BGM sources into the ELA areas

Transmission of all audio signals via fiber optics, CobraNet, network

Transmission of the RS 485 – signals for networking DPM 4000 via fiber optics.

Script Files

Script files as advanced programming are extentions of the operating elements in the IRIS program for use of multiple

commands coming from a single element.

• EV NetMax with IRIS-NET software is the integrating tool for audio and control

• EV NetMax is the linking component to use distributed ProSound installations as life safety standard conform integrated systems

• EV NetMax can be used as audio expansion for Dynacord ProAnnounce systems

• EV NetMax can be interconnected via data interface, GPIO‘s and supervisioned audio lines

• User tailored operation, supervision and administration from e.g. paging consoles, PC or touch TFT screens and media control systems

• Status and failure signalization „in both worlds“:Life safety Paging and ProSound