View
2
Download
0
Category
Preview:
Citation preview
Copyright © 2015 University of Cambridge Last Modified: January 2015 Page 1
Web Recruitment – Generating Correspondence
Contents
1. WEB RECRUITMENT – INTRODUCTION ............................................................................................................................... 2
1.1 OVERVIEW OF RECRUITMENT-RELATED SYSTEMS AND WEB RECRUITMENT RELEASES 1-3 ............................................................................. 2
1.2 RELEASE 4 OVERVIEW ..................................................................................................................................................................... 3
1.3 HR SYSTEM LINKAGES ..................................................................................................................................................................... 4
1.4 SYSTEM SUPPORT ........................................................................................................................................................................... 4
2. WEB RECRUITMENT – AVAILABLE DOCUMENTATION ........................................................................................................ 5
3. GENERATING ELECTRONIC REJECTION EMAILS AND LETTERS ............................................................................................. 6
STEP 1 – REJECT THE UNSUCCESSFUL APPLICANTS ...................................................................................................................................... 6
STEP 2 – SET-UP THE CONTACT DETAILS FOR THE VACANCY ........................................................................................................................ 10
STEP 3 – OPTIONALLY CUSTOMISE THE REJECTION EMAIL ........................................................................................................................... 13
STEP 4 – CONFIRM THE REJECTION ........................................................................................................................................................ 17
5. USING MANUAL REJECTIONS OUTSIDE OF WEB RECRUITMENT ....................................................................................... 19
STEP 1 – REJECT THE UNSUCCESSFUL APPLICANTS .................................................................................................................................... 19
STEP 2 – COMPLETE THE VACANCY CONFIGURATION INFORMATION ............................................................................................................. 23
STEP 3 – CANCEL THE REJECTION TASKS ................................................................................................................................................. 26
STEP 4 – RECORD DETAILS OF HOW THE REJECTIONS WERE HANDLED. .......................................................................................................... 28
4. USING ELECTRONIC REFERENCES WITHIN WEB RECRUITMENT ........................................................................................ 31
4.1 GENERATING ELECTRONIC REFERENCE REQUESTS ................................................................................................................................ 31
4.2 OVERVIEW OF THE ELECTRONIC PROCESS FOR REFEREES ...................................................................................................................... 47
4.3 VIEWING RETURNED REFERENCES ................................................................................................................................................... 51
6. REQUESTING REFERENCES MANUALLY ............................................................................................................................. 52
STEP 1 – SET-UP THE CONTACT AND REFERENCE INFORMATION FOR THE VACANCY ......................................................................................... 53
STEP 2 – IDENTIFY THE APPLICANT(S) AND INITIATE A REFERENCE TASK ......................................................................................................... 59
STEP 3 – SET THE REFERENCE TASK TO MANUAL ....................................................................................................................................... 64
STEP 4 - RECORD DETAILS OF THE CORRESPONDENCE SENT TO THE APPLICANT ............................................................................................... 66
STEP 5 – UPLOAD THE RETURNED REFERENCE.......................................................................................................................................... 69
7. RECORDING OTHER CORRESPONDENCE AND VIEWING HISTORY ..................................................................................... 71
8. CANCELLING A CORRESPONDENCE TASK .......................................................................................................................... 74
9. SWITCHING A CORRESPONDENCE TASK BACK TO MANUAL ............................................................................................. 78
Copyright © 2015 University of Cambridge Last Modified: January 2015 Page 2
Web Recruitment – Generating Correspondence
1. Web Recruitment – Introduction
1.1 Overview of recruitment-related systems and Web Recruitment Releases 1-3
The recruitment process begins with the identification and definition of a vacancy. This includes
developing or updating the PD33 or role description and, for new academic-related and assistant staff
vacancies, the grading of the post. Posts which are graded are set up in CHRIS (the HR and Payroll
System) by the Grading team in the HR Division.
The new Recruitment Administration System (RAS) is then used to:
Find the details of a vacancy which exists in CHRIS (posts which have been graded or are being refilled); or
Enter the vacancy details for a new academic or research post (these are not individually graded so have not already been set up in CHRIS at this point).
Permission to fill a vacancy is then requested and granted in RAS.
In most cases, the vacancy should be advertised. Once all required permissions for a vacancy have been
obtained, RAS can be used to place an advert on the University’s Job Opportunities pages and to send to
external media for publication.
In RAS, a department/institution records whether or not they will be inviting online job applications via the
Web Recruitment System. Where the Web Recruitment System is to be used, RAS will:
Insert an ‘Apply online’ button on the advert for the vacancy on the Job Opportunities pages;
Insert a URL in external adverts for the vacancy, which routes to the relevant advert on Job Opportunities.
The Web Recruitment System can then be used to receive and process applications received.
The first release of the Web Recruitment System focused on:
Allowing applicants to apply online via the University Job Opportunities pages;
Automatically acknowledging applications;
Allowing recruiters to view, email and print applications;
Allowing recruiters/administrators to manage and record the results of the selection process; and
Transferring the successful applicant(s) into the CHRIS Recruitment Module.
The second release of the Web Recruitment System focused on:
Allowing applicants to copy personal details, qualifications and employment history from a previous application;
Allowing recruiters to generate rejection emails and letters to applicants;
Allowing recruiters to generate reference request emails and letters;
Allowing referees to upload their reference into the system after a reference request email has been sent to them.
The third release of the Web Recruitment System focused on:
Allowing recruiters to generate an email to the successful applicant where they need to provide information for a Tier 2 Certificate of Sponsorship;
Copyright © 2015 University of Cambridge Last Modified: January 2015 Page 3
Web Recruitment – Generating Correspondence
Allowing applicants to log back into their Web Recruitment account to enter the additional Tier 2 CoS information and upload supporting documents;
Allowing recruiters to download the applicant details required for a Tier 2 CoS so that it can be attached to the rest of the CoS application for submission to HR;
Automated marking of an application as eligible for purging 12 months after the vacancy closes (including extended deletion dates for those vacancies where CoS retention policies apply);
Allowing super-users to mark a vacancy as a purging exception;
Automated deletion of unsubmitted applications two months after the vacancy closing date;
Retaining anonymised data for future trend analysis and management reporting;
Allowing applicants to enter basic disclosure information when a vacancy has a basic disclosure check selected within new RAS;
Generating reports of applicant information from within Web Recruitment and export results to Excel; and
Adding bookmarks to the application pack PDF, allowing recruiters to navigate around more easily between applicants and documents.
1.2 Release 4 overview
Release 4 focuses on:
Removing the need for vacancy administrators in departments/institutions to use the CHRIS Recruitment Module and CHRIS/10A form for the majority of appointments and replacing these with the following actions doing the following within Web Recruitment:
o Recording details about the offer and appointment within a new Offers section;
o Uploading supporting documents for an appointment (and Tier 2 Certificate of
Sponsorship application, if required); and
o Submitting an electronic Appointment Request to the HR New Appointment team.
Pre-filling the Offers section with details about the applicant (from their online application form) and the position (from CHRIS);
Allowing vacancy administrators to generate an offer letter to the successful candidate using details that they have entered into the system or upload an offer letter they have created outside of the system;
Allowing vacancy administrators to download a cover sheet for any supporting documents being sent to the HR New Appointment Team outside of the system;
Recording details of how and when offer letters were sent to the successful candidate;
Storing and accessing offer letter history;
Allowing the New Appointment Team to receive and view appointment requests online within a new HR Processing section of the system; and
Allowing the New Appointments team to transfer details of the applicant and appointment into the CHRIS Recruitment Module.
Departments/institutions should request appointments via Web Recruitment wherever possible and the
New Appointment team will transfer successful applicants to CHRIS using their screens within the system.
The supporting documents cover sheet can then be downloaded and attached to supporting documents
and returned to the HR New Appointment Team for processing.
Copyright © 2015 University of Cambridge Last Modified: January 2015 Page 4
Web Recruitment – Generating Correspondence
1.3 HR system linkages
Diagram 1 below shows how the different HR systems link together in the recruitment process.
Diagram 1: HR systems linkages in the recruitment process
New RAS
CHRIS
Web Recruitment
New academic/research post or amended existing post information
Existing post information
Job Opportunities pages
Job advert information
Recruits click link
New appointee information
New functionality
1.4 System support
Technical queries relating to the Web Recruitment System should be directed to the CHRIS Helpdesk by
emailing chris.helpdesk@admin.cam.ac.uk. The New Appointment Team should be contacted for advice
about making appointments via hrnewappointmentteam@admin.cam.ac.uk.
Copyright © 2015 University of Cambridge Last Modified: January 2015 Page 5
Web Recruitment – Generating Correspondence
2. Web Recruitment – available documentation
This guide provides details of how to generate two forms of correspondence to applicants:
Rejection emails and letters; and
Reference requests.
It also includes details of how to record correspondence made outside of the Web Recruitment system.
This manual (shaded in grey below) forms part of the wider set of documentation for Web Recruitment
summarised in the table. These documents can be found on the HR Systems Web Pages, along with
additional supporting information (including links to videos and release notifications).
Title Document Type Description
Guide for Selectors User guide A guide designed for selectors that describes the process of logging on to Web Recruitment, viewing and downloading application packs.
Managing Vacancies User guide This is the main user guide, which explains how to find vacancies in the system, grant other access, download application forms, record outcomes at each stage of selection and complete recruitment so that the appropriate retention policy is applied to the details of the vacancy.
Tier 2 Certificate of Sponsorship – Requesting Applicant Details
Quick reference This is a two page pictorial overview of the end-to-end process for requesting information from a successful applicant for a Tier 2 Certificate of Sponsorship (CoS) application. It is intended for users who do not require the level of detail provided by the step-by-step instructions in the user guide below.
Tier 2 Certificate of Sponsorship – Requesting Applicant Details
User guide This guide provides detailed step-by-step instructions on how to request that a successful applicant logs back into their Web Recruitment account to provide information and supporting documents needed for a Tier 2 CoS application.
Generating Correspondence
User guide This guide explains how to generate rejection emails/letters and reference request emails/letters within the system. It also details how to view references uploaded directly into the system by referees and how to upload references received by post/email.
Generating Reports User guide The Web Recruitment system provides standard vacancy reports for applicant and referee details (for example, for use in mail merges or for email lists). This document describes the standard reports and how to generate them. It also describes how to use the custom reporting tool built into the application.
Managing Offers Quick reference This is a two page pictorial overview of the end-to-end offer and appointment process. It is intended for users who do not require the level of detail provided by the step-by-step instructions in the user guide below.
Managing Offers User guide This guide describes the process of making an offer, generating an offer letter, recording offer outcomes and entering additional information so that an electronic appointment request can be made to the HR New Appointment team. This process replaces the need for departments/institutions to use the CHRIS Recruitment Module and CHRIS 10(A) form for most appointments. The guide also provides a summary of how to request Tier 2 CoS information; full details are in the CoS guide.
Overview of the Applicant Process
User guide A guide for internal users of the Web Recruitment System that describes the process of making an online application from the applicant’s perspective.
Applicant Frequently Asked Questions (FAQs)
FAQs This document details common queries from applicants that have been reported through the CHRIS Helpdesk, in the applicant survey and to vacancy contacts within departments/institutions.
Administrator Frequently Asked Questions (FAQs)
FAQs This document details common queries from recruiters, selectors and vacancy administrators reported through the CHRIS Helpdesk, in the department/institution benefits survey and system demonstrations.
Processing Appointment Requests
User guide This guide is for the HR New Appointment team and describes how to find, check and process Appointment Requests from departments/institutions.
Copyright © 2015 University of Cambridge Last Modified: January 2015 Page 6
Web Recruitment – Generating Correspondence
3. Generating Electronic Rejection Emails and Letters
There are four steps to this process:
Step 1 – reject the unsuccessful applicants
Step 2 – set up the contact details for the vacancy
Step 3 – optionally customise the rejection email
Step 4 – confirm the rejection correspondence
Note that the rejection will not be sent unless you have confirmed it under Correspondence awaiting
confirmation.
The following steps describe the process.
Step 1 – Reject the unsuccessful applicants
1 Log in to the HR Admin Panel. The Vacancies Tab will display all the vacancies that you have access to.
2. Locate the vacancy for which you wish to send rejection correspondence. Click on the Manage Vacancy button.
Copyright © 2015 University of Cambridge Last Modified: January 2015 Page 7
Web Recruitment – Generating Correspondence
The Vacancy Overview screen will be displayed.
Copyright © 2015 University of Cambridge Last Modified: January 2015 Page 8
Web Recruitment – Generating Correspondence
3. Click on Process applicants.
4. Select the applicants you wish to reject and select the Rejected status from the drop down list.
Copyright © 2015 University of Cambridge Last Modified: January 2015 Page 9
Web Recruitment – Generating Correspondence
5. Click Apply.
Copyright © 2015 University of Cambridge Last Modified: January 2015 Page 10
Web Recruitment – Generating Correspondence
Step 2 – Set-up the contact details for the vacancy
Next select Vacancy Configuration.
Enter the contact information for All correspondence for the vacancy. If you are an Administrator sending letters on behalf of a colleague then you may enter another person’s details into these fields.
Copyright © 2015 University of Cambridge Last Modified: January 2015 Page 11
Web Recruitment – Generating Correspondence
Once the contact information is complete, ensure that you check the Mark Contact Configuration as complete check box and click on Save Configuration.
Note that where you have previously entered contact information and have already generated correspondence which is awaiting confirmation, a confirmation message will be displayed to remind you that the amended contact information and that what you have entered will be applied to the existing tasks. You will need to click on Yes to confirm that you are aware of that and wish to proceed.
Copyright © 2015 University of Cambridge Last Modified: January 2015 Page 12
Web Recruitment – Generating Correspondence
A confirmation message will be displayed.
Copyright © 2015 University of Cambridge Last Modified: January 2015 Page 13
Web Recruitment – Generating Correspondence
Step 3 – Optionally customise the rejection email
Next, select Manage Rejection Correspondence. The applicants that have been rejected will be displayed.
If you wish to tailor an individual rejection email, select the Customise option from the drop-down menu next to the Re-Activate button.
The Customise Rejection Email window will open to allow you to add an extra paragraph (which will become the second paragraph in the email) as required.
Type your text and click on the Save button.
If you do not need to tailor the email then the system will use the default correspondence template, including the data entered when you configured the correspondence for the vacancy where required.
Copyright © 2015 University of Cambridge Last Modified: January 2015 Page 14
Web Recruitment – Generating Correspondence
This text will then be inserted into the rejection email/ pdf as shown:
Click on the Preview option to view a copy of the email.
Copyright © 2015 University of Cambridge Last Modified: January 2015 Page 15
Web Recruitment – Generating Correspondence
The Correspondence Preview window will be displayed.
Please note that the wording of the rejection email/letter will also include the following sentence if you have rejected the individual at Selection Stage 1 or later:
If you would like to discuss this further or receive feedback, please contact Name on telephone number or via email address.
This is in accordance with the Recruitment Guidance which states that, due to high volumes of applications, it is University practice not to provide feedback to those rejected before being invited to an interview.
If you need to send a rejection letter outside the system (for example because an applicant has made a manual application and does not have an email address) select the Download Letter option from the drop down menu.
Copyright © 2015 University of Cambridge Last Modified: January 2015 Page 16
Web Recruitment – Generating Correspondence
Select to Open the file in the pop-up window.
A PDF will open that you can print and post as appropriate.
Copyright © 2015 University of Cambridge Last Modified: January 2015 Page 17
Web Recruitment – Generating Correspondence
Step 4 – Confirm the rejection
When you have completed any customisation of letters, navigate to the Correspondence option in the toolbar on the left-hand side of the screen and select Awaiting Confirmation.
Your rejection tasks will be displayed and you can preview the final copy of the emails using the Preview button in the Action column.
When you are satisfied with the correspondence generated, select the applicants and click the Confirm Selected Tasks button.
Copyright © 2015 University of Cambridge Last Modified: January 2015 Page 18
Web Recruitment – Generating Correspondence
Click the Yes button in the confirmation message to proceed with sending rejection emails to the selected
applicants.
Copyright © 2015 University of Cambridge Last Modified: January 2015 Page 19
Web Recruitment – Generating Correspondence
5. Using manual rejections outside of Web Recruitment
The Web Recruitment system automatically generates a rejection task when an applicant has been set
to a status of ‘rejected’ at any stage of the selection process.
In the unlikely event that you need to cancel these tasks and send rejection details manually you
should:
Step 1 – Reject the unsuccessful applicants
Step 2 - Complete the vacancy configuration information
Step 3 – Cancel the rejection tasks
Step 4 – Record details of how the rejections were handled.
These four steps are described in more detail below:
Step 1 – Reject the unsuccessful applicants
1 Log in to the HR Admin Panel. The Vacancies Tab will display all the vacancies that you have access to.
Copyright © 2015 University of Cambridge Last Modified: January 2015 Page 20
Web Recruitment – Generating Correspondence
2 Locate the vacancy for which you wish to send rejection correspondence. Click on the Manage Vacancy button.
3 The Vacancy Overview screen will be displayed:
Copyright © 2015 University of Cambridge Last Modified: January 2015 Page 21
Web Recruitment – Generating Correspondence
4 Click on Process applicants.
5 Select the applicants you wish to reject and selet the Rejected status from the drop down list.
Copyright © 2015 University of Cambridge Last Modified: January 2015 Page 22
Web Recruitment – Generating Correspondence
Click Apply.
Copyright © 2015 University of Cambridge Last Modified: January 2015 Page 23
Web Recruitment – Generating Correspondence
Step 2 – Complete the vacancy configuration information
Select Vacancy Configuration:
Enter the contact information for All correspondence for the vacancy. If you are an Administrator sending letters on behalf of a colleague then you may enter another person’s details into these fields.
Copyright © 2015 University of Cambridge Last Modified: January 2015 Page 24
Web Recruitment – Generating Correspondence
Once the contact information is complete, ensure that you check the Mark Contact Configuration as complete check box and click on Save Configuration.
Note that where you have previously entered contact information and have already generated correspondence which is awaiting confirmation, a confirmation message will be displayed to remind you that the amended contact information and that what you have entered will be applied to the existing tasks. You will need to click on ‘Yes’ to confirm that you are aware of that and wish to proceed.
Copyright © 2015 University of Cambridge Last Modified: January 2015 Page 25
Web Recruitment – Generating Correspondence
A confirmation message will be displayed.
Copyright © 2015 University of Cambridge Last Modified: January 2015 Page 26
Web Recruitment – Generating Correspondence
Step 3 – Cancel the rejection tasks
From the Correspondence Awaiting Confirmation menu option on the left menu bar:
Tick the task you wish to cancel and click on Cancel Selected Tasks.
You will be asked to confirm the cancellation.
Copyright © 2015 University of Cambridge Last Modified: January 2015 Page 27
Web Recruitment – Generating Correspondence
When you refresh the screen the task will have been removed:
Copyright © 2015 University of Cambridge Last Modified: January 2015 Page 28
Web Recruitment – Generating Correspondence
Step 4 – Record details of how the rejections were handled.
In order that you do not need to keep separate records outside of the system, it is recommended that you
input details of the manual rejections sent (i.e. outside of the system) by using the Recording
correspondence function within Web Recruitment.
From the vacancy tab:
Locate the vacancy for which you wish to record details of the manual rejection correspondence. Click on
the Manage Vacancy button.
Select View or Record Correspondence from the Correspondence section on the left of the screen:
Copyright © 2015 University of Cambridge Last Modified: January 2015 Page 29
Web Recruitment – Generating Correspondence
Select Record Correspondence.
Copyright © 2015 University of Cambridge Last Modified: January 2015 Page 30
Web Recruitment – Generating Correspondence
The Record Correspondence window will be displayed.
Select the relevant applicant from the drop down list. Select the Contact Type and Contact Format; enter the Date, Summary/Subject and Details. Once complete, click on the Record Correspondence button.
The entry will appear in the table.
Copyright © 2015 University of Cambridge Last Modified: January 2015 Page 31
Web Recruitment – Generating Correspondence
4. Using Electronic References within Web Recruitment
4.1 Generating electronic reference requests
Reference requests can be sent electronically at the required point in the process to referees for whom
applicants have:
Supplied an email address; and
Indicated in their application form that they can be contacted at that time (applicants currently have
the option to tell us that referees can be contacted during the selection process, or once they have
been made an offer of employment).
Further details about when to request references, when they may be used in the selection process, how
to evaluate them and data protection implications of references can be found in the Request references
section of the Recruitment Guidance.
Within the Web recruitment system the process consists of three steps:
Step 1 – Set-up the contact and reference information for the vacancy
Step 2 – Identify the applicant(s) and request the reference
Step 3 – Confirm the reference request
Step 1 – Set-up the contact and reference information for the vacancy
1. Log in to the HR Admin Panel. The Vacancies Tab will display all the vacancies that you have access to.
Copyright © 2015 University of Cambridge Last Modified: January 2015 Page 32
Web Recruitment – Generating Correspondence
2. Locate the vacancy for which you wish to send out reference requests. Click on the Manage Vacancy button.
The Vacancy Overview screen will be displayed:
Copyright © 2015 University of Cambridge Last Modified: January 2015 Page 33
Web Recruitment – Generating Correspondence
3. Select Vacancy Configuration.
4. If you have not done so already, enter the contact information for the vacancy. If you are an administrator sending letters on behalf of a colleague then you may enter another person’s details into these fields.
Copyright © 2015 University of Cambridge Last Modified: January 2015 Page 34
Web Recruitment – Generating Correspondence
Please note that if you update the contact information at any point, all correspondence that you have already generated, and which is awaiting confirmation, will be updated with the amended details. If you do not wish this to happen, you can confirm awaiting confirmation tasks before making a change to the contact information
5. Once the Contact Information is complete, ensure that you check the Mark Contact Configuration as complete check box and click on Save Configuration.
Copyright © 2015 University of Cambridge Last Modified: January 2015 Page 35
Web Recruitment – Generating Correspondence
6. Select the second tab in this window, Reference Correspondence
Select the reference request template that you wish to use.
Three templates have been developed:
An academic template to assess an individual’s academic standing and potential, paying particular attention to his/her performance in teaching and research.
A non-academic template for a general assessment of the individual’s suitability for the role.
A non-academic form that is similar to the old PD15 form (i.e. a structured template for the referee’s assessment, which asks specific questions about generic skills, whether they would re-employ the individual etc.).
7. Enter the preferred date by which you would like referees to have responded to your request.
Copyright © 2015 University of Cambridge Last Modified: January 2015 Page 36
Web Recruitment – Generating Correspondence
8. If required, use the Additional Paragraph field to enter an additional paragraph of text that you would like included in the letter for all reference requests for the vacancy.
The additional paragraph will appear in the position shown in the example below:
Copyright © 2015 University of Cambridge Last Modified: January 2015 Page 37
Web Recruitment – Generating Correspondence
9. Once you have finished configuring contact information, click on the check box to Mark Reference Correspondence as complete and click the Save Configuration button.
Note: You also have the option on this screen to decide whether the returned references
ought to be included in the application pack for members of the Appointing Body to
review. The default is not to include them. Please see the Request references
section of the Recruitment Guidance for information on when and when not to use
references as part of the selection process.
Copyright © 2015 University of Cambridge Last Modified: January 2015 Page 38
Web Recruitment – Generating Correspondence
Step 2 – Identify the applicant(s) and request the reference
Select Manage Reference Request from the Tasks section of the navigation menu.
Copyright © 2015 University of Cambridge Last Modified: January 2015 Page 39
Web Recruitment – Generating Correspondence
Select the stage of the process that you are currently working in from the drop down box.
The applicants at this stage and their referees will be displayed. Where the applicant has indicated on the application form that they do not wish the referee to be contacted before they have been made an offer, the referee will be displayed in grey and shown as not contactable until the applicant is recorded in the system as having accepted an offer.
Copyright © 2015 University of Cambridge Last Modified: January 2015 Page 40
Web Recruitment – Generating Correspondence
Select the applicants for whom you wish to send a reference request and click on Request References.
A confirmation message will be displayed and Awaiting Confirmation will be displayed in the status column for the referees that have been selected. See Step 3 below for instructions on what to do next to confirm that the reference request emails should be sent.
Note that if you need to send a reference request outside the system (for example because a referee has been supplied without an email address) click on the drop-down menu next to the Upload button and Click Download Letter. This will open a PDF that you can print and post.
Copyright © 2015 University of Cambridge Last Modified: January 2015 Page 41
Web Recruitment – Generating Correspondence
Select Open in the pop-up window.
A PDF will open that you can post as appropriate.
Copyright © 2015 University of Cambridge Last Modified: January 2015 Page 42
Web Recruitment – Generating Correspondence
Step 3 – Confirm the reference request
For reference request emails, you now need to navigate to Correspondence in the toolbar at the left-hand side of the screen and select Awaiting Confirmation.
Use the Filter to sort Reference Tasks from Rejection Tasks
Select Preview button in the Action column to view a copy of a reference request.
Copyright © 2015 University of Cambridge Last Modified: January 2015 Page 43
Web Recruitment – Generating Correspondence
A preview will be displayed:
When you are satisfied with the correspondence generated, select the applicants for whom you wish to email reference requests and click the Confirm Selected Tasks button.
Copyright © 2015 University of Cambridge Last Modified: January 2015 Page 44
Web Recruitment – Generating Correspondence
Confirm the correspondence by clicking on the Yes button in the pop-up window.
A tasks being processed message will be displayed. A reference request will be emailed to each referee.
Note that you can also cancel the reference request in this screen:
Copyright © 2015 University of Cambridge Last Modified: January 2015 Page 45
Web Recruitment – Generating Correspondence
Tick the task you wish to cancel and click on Cancel Selected Tasks. You will be asked to confirm:
When you refresh the screen the task will have been removed:
Note that you can also switch a reference back to manual on this screen by using the actions menu:
Copyright © 2015 University of Cambridge Last Modified: January 2015 Page 46
Web Recruitment – Generating Correspondence
You will be asked to confirm the action:
When you refresh the screen the task will be shown under the Manual tab so that you can record the manual correspondence that you have sent or have decided to send.
Copyright © 2015 University of Cambridge Last Modified: January 2015 Page 47
Web Recruitment – Generating Correspondence
4.2 Overview of the Electronic Process for Referees
Referees are emailed and provided with a link and a PIN to upload their reference into the Web
Recruitment System.
The wording of the email is tailored depending on whether you have added any customised content and
the reference template you have selected. For example, the Academic template contains the following
paragraph:
The non-academic template contains this paragraph:
The non-academic with form contains a link to be able to download the form:
Copyright © 2015 University of Cambridge Last Modified: January 2015 Page 48
Web Recruitment – Generating Correspondence
When the referee clicks on the link they will be required to enter the PIN and log in.
By clicking on this link, they will also be able to view the Job Opportunities advert for the vacancy an
individual is applying for, as well as any HR7 Further Information document published with the advert.
Copyright © 2015 University of Cambridge Last Modified: January 2015 Page 49
Web Recruitment – Generating Correspondence
The referee will supply their organisation name and their role in the organisation and can then view the
role details (advert and further information) and attach their reference.
Where the non-academic with form has been selected as the reference template, then the referee will
complete a reference form as below:
Copyright © 2015 University of Cambridge Last Modified: January 2015 Page 50
Web Recruitment – Generating Correspondence
Once the reference has been submitted a confirmation will be displayed:
Note: If you have requested a reference and then reject the applicant before the reference is
completed, the referee will be unable to complete reference details, even though they
have received a request. It is, therefore, strongly recommended that you contact
affected referees should this situation arise.
Copyright © 2015 University of Cambridge Last Modified: January 2015 Page 51
Web Recruitment – Generating Correspondence
4.3 Viewing Returned References
1. Once the reference has been received in the system, you will see this by selecting Manage Reference Requests under Tasks.
The status of all requests will be displayed in the table.
When a reference has been submitted, the status will display Complete and a PDF file will be shown in the File column. You can then download a copy of the reference.
Copyright © 2015 University of Cambridge Last Modified: January 2015 Page 52
Web Recruitment – Generating Correspondence
6. Requesting references manually
Reference requests do not have to be sent electronically using the Web Recruitment System.
If you do choose to collect these outside of the system then, in order to allow a complete audit trail and
to avoid the need for you to keep manual records outside of the system, Web Recruitment will allow you
record details of any manual reference requests and will also allow you to upload returned references.
You are strongly encouraged to use this facility.
Further details about when to request references, when they may be used in the selection process, how
to evaluate them and data protection implications of references can be found in the Requesting
references section of the Recruitment Guidance.
Within the Web recruitment system the process consists of the following five steps:
Step 1 – Set up the contact and reference information for the vacancy
Step 2 – Identify the applicant(s) and initiate a reference record
Step 3 – Switch the correspondence task to manual
Step 4 - Record details of the correspondence sent to the applicant
Step 5 – Upload the returned reference
The sections below explain each step in detail.
Copyright © 2015 University of Cambridge Last Modified: January 2015 Page 53
Web Recruitment – Generating Correspondence
Step 1 – Set-up the contact and reference information for the vacancy
Log in to the HR Admin Panel. The Vacancies Tab will display all the vacancies that you have access to.
Locate the vacancy for which you wish to send out reference requests. Click on the Manage Vacancy button.
The Vacancy Overview screen will be displayed:
Copyright © 2015 University of Cambridge Last Modified: January 2015 Page 54
Web Recruitment – Generating Correspondence
Copyright © 2015 University of Cambridge Last Modified: January 2015 Page 55
Web Recruitment – Generating Correspondence
Select Vacancy Configuration.
If you have not done so already, enter the contact information for the vacancy. If you are an administrator sending letters on behalf of a colleague then you may enter another person’s details into these fields.
Copyright © 2015 University of Cambridge Last Modified: January 2015 Page 56
Web Recruitment – Generating Correspondence
Please note that if you update the contact information at any point, all correspondence that you have already generated, and which is awaiting confirmation, will be updated with the amended details. If you do not wish this to happen, you can confirm awaiting confirmation tasks before making a change to the contact information
Once the Contact Information is complete, ensure that you check the Mark Contact Configuration as complete check box and click on Save Configuration.
Copyright © 2015 University of Cambridge Last Modified: January 2015 Page 57
Web Recruitment – Generating Correspondence
Select the second tab in this window, Reference Correspondence
Select the reference request template that you wish to use.
Three templates have been developed:
An academic template to assess an individual’s academic standing and potential, paying particular attention to his/her performance in teaching and research.
A non-academic template for a general assessment of the individual’s suitability for the role.
A non-academic form that is similar to the old PD15 form (i.e. a structured template for the referee’s assessment, which asks specific questions about generic skills, whether they would re-employ the individual etc.).
Copyright © 2015 University of Cambridge Last Modified: January 2015 Page 58
Web Recruitment – Generating Correspondence
Enter the preferred date by which you would like referees to have responded to your request.
Once you have finished configuring contact information, click on the check box to Mark Reference Correspondence as complete and click the Save Configuration button.
Note: You also have the option on this screen to decide whether the returned references
ought to be included in the application pack for members of the Appointing Body to
review. The default is not to include them. Please see the Request references
section of the Recruitment Guidance for information on when and when not to use
references as part of the selection process.
Copyright © 2015 University of Cambridge Last Modified: January 2015 Page 59
Web Recruitment – Generating Correspondence
Step 2 – Identify the applicant(s) and initiate a reference task
Select Manage Reference Request from the Tasks section of the navigation menu.
Copyright © 2015 University of Cambridge Last Modified: January 2015 Page 60
Web Recruitment – Generating Correspondence
Select the stage of the process that you are currently working in from the drop down box.
The applicants at this stage and their referees will be displayed. Where the applicant has indicated on the application form that they do not wish the referee to be contacted before they have been made an offer, the referee will be displayed in grey and shown as not contactable until the applicant is recorded in the system as having accepted an offer.
Copyright © 2015 University of Cambridge Last Modified: January 2015 Page 61
Web Recruitment – Generating Correspondence
Select the applicants for whom you wish to send a reference request and click on Request References.
A confirmation message will be displayed and Awaiting Confirmation will be displayed in the status column for the referees that have been selected.
Note: You can use the automated reference template as the basis for your manual
reference request by clicking on the drop-down menu next to the Upload button and
then selecting Download Letter.
Copyright © 2015 University of Cambridge Last Modified: January 2015 Page 62
Web Recruitment – Generating Correspondence
Select Open in the pop-up window.
This will open a PDF that you can copy (or edit in Adobe Acrobat)
Copyright © 2015 University of Cambridge Last Modified: January 2015 Page 63
Web Recruitment – Generating Correspondence
A reference task will also have been created under the System Managed tab on the Correspondence awaiting confirmation menu:
Copyright © 2015 University of Cambridge Last Modified: January 2015 Page 64
Web Recruitment – Generating Correspondence
Step 3 – Set the reference task to manual
You can now switch the reference to manual by selecting Set to manual from the actions menu.
You will be asked to confirm the action:
When you refresh the screen the task will then be shown under the Manual tab:
Copyright © 2015 University of Cambridge Last Modified: January 2015 Page 65
Web Recruitment – Generating Correspondence
Copyright © 2015 University of Cambridge Last Modified: January 2015 Page 66
Web Recruitment – Generating Correspondence
Step 4 - Record details of the correspondence sent to the applicant
Click on Record correspondence under the action menu:
Complete the details of the correspondence:
Click on the Record Correspondence button:
Copyright © 2015 University of Cambridge Last Modified: January 2015 Page 67
Web Recruitment – Generating Correspondence
A confirmation message will be displayed in the top right hand corner of the screen:
Note: You can also mark the task as complete on this screen:
Select the task and then click on the Mark complete button.
Confirm the actions:
The task will be moved to the Correspondence - Completed and others menu.
Copyright © 2015 University of Cambridge Last Modified: January 2015 Page 68
Web Recruitment – Generating Correspondence
Copyright © 2015 University of Cambridge Last Modified: January 2015 Page 69
Web Recruitment – Generating Correspondence
Step 5 – Upload the returned reference
Once a referee has returned a reference, it can be uploaded against the applicant’s record in Web
Recruitment.
On the Manage reference requests menu click on Add reference.
Complete the details of the returned reference and click on Submit Reference.
Copyright © 2015 University of Cambridge Last Modified: January 2015 Page 70
Web Recruitment – Generating Correspondence
A message will be displayed in the top right of the screen in order to confirm the action.
The uploaded reference will appear as an icon next to the reference task.
Note: You can click on the icon to view the reference again.
Copyright © 2015 University of Cambridge Last Modified: January 2015 Page 71
Web Recruitment – Generating Correspondence
7. Recording other correspondence and viewing history
You can use this screen to view all system managed correspondence and also to record other non-
system correspondence such as other emails, letters and phone calls to applicants.
Select View or Record Correspondence from the Correspondence section on the left of the screen.
To record other types of non-system correspondence, select Record Correspondence.
Copyright © 2015 University of Cambridge Last Modified: January 2015 Page 72
Web Recruitment – Generating Correspondence
The Record Correspondence window will be displayed.
Select the relevant applicant from the drop down list. Select the Contact Type and Contact Format; enter the Date, Summary/Subject and Details. Once complete, click on the Record Correspondence button.
Copyright © 2015 University of Cambridge Last Modified: January 2015 Page 73
Web Recruitment – Generating Correspondence
The entry will appear in the table.
All correspondence will be listed; you can choose to filter by Rejection, Reference or Other if
required.
Copyright © 2015 University of Cambridge Last Modified: January 2015 Page 74
Web Recruitment – Generating Correspondence
8. Cancelling a correspondence task
Please note that before you undertake this task you should ensure that the vacancy configuration
information is complete. See previous section.
If you wish to cancel any type of correspondence task you can do this from the Correspondence
Awaiting Confirmation menu option on the left menu bar.
Tick the task you wish to cancel and click on Cancel Selected Tasks.
Copyright © 2015 University of Cambridge Last Modified: January 2015 Page 75
Web Recruitment – Generating Correspondence
You will be asked to confirm the cancellation.
When you refresh the screen the task will have been removed.
Copyright © 2015 University of Cambridge Last Modified: January 2015 Page 76
Web Recruitment – Generating Correspondence
Note: You will not be able to complete recruitment for a vacancy when tasks are outstanding so
you should cancel or revert any remaining tasks to manual before closing the vacancy.
It is strongly recommended that you revert the outstanding tasks to manual so that you
have the opportunity to record the alternative non-system method of contact you used for
the task. This has the advantage of providing a clear audit trail should any
queries/issues, or an internal recruitment audit, occur in the future.
Note: It is very important that you mark recruitment as complete for a vacancy within 12 months
of the closing date for online applications when:
A recruitment process has been successful, all unsuccessful applicants have been
rejected and all successful applicants have been transferred to CHRIS from the
offers stage in Web Recruitment, or
The recruitment process was unsuccessful and no successful candidates were
taken forward from one of the selection stages.
Marking a vacancy as complete will perform a number of actions within the system to
benefit departments and Institutions. A vacancy marked as complete will:
Be purged of applicant identifiable data automatically 12 months after the closing
date in accordance with the University’s recruitment document retention
policy(unless a the successful applicant required a Tier 2 CoS or the standard
purging schedule has been overridden with approval from HR);
Have any successful candidate information saved as a PDF snapshot for future
use;
Not appear in a user’s list of vacancies (unless a user actively chooses for
complete vacancies to be displayed).
Copyright © 2015 University of Cambridge Last Modified: January 2015 Page 77
Web Recruitment – Generating Correspondence
See the guide to Managing Vacancies and Applicants on the HR Systems pages for more details.
Copyright © 2015 University of Cambridge Last Modified: January 2015 Page 78
Web Recruitment – Generating Correspondence
9. Switching a correspondence task back to manual
Please note that before you undertake this task you should ensure that the vacancy configuration
information is complete. See previous section.
If you wish to switch any type of automated correspondence task back to manual you can do this from
the Correspondence Awaiting Confirmation menu option on the left menu bar.
1 Tick the task you wish to process and click on Set to Manual using the option on the actions
menu.
2 You will be asked to confirm the action.
Copyright © 2015 University of Cambridge Last Modified: January 2015 Page 79
Web Recruitment – Generating Correspondence
3 When you refresh the screen the task will then be shown under the Manual tab so that you
can record the manual correspondence you have decided to send.
Note that you will not be able to complete recruitment for a vacancy when tasks are outstanding so
you should cancel or revert any remaining tasks to manual before closing the vacancy.
It is strongly advised that you revert the outstanding tasks to manual so that you have the opportunity
to record the alternative non-system method of contact you used for the task. This has the
advantage of providing a clear audit trail should any issues/queries, or an internal recruitment audit,
occur in the future.
Note: It is important that you mark recruitment as complete for a vacancy within 12 months of
the closing date for online applications when:
A recruitment process has been successful, all unsuccessful applicants have been
rejected and all successful applicants have been transferred to CHRIS from the
offers stage in Web Recruitment, or
The recruitment process was unsuccessful and no successful candidates were
taken forward from one of the selection stages.
Marking a vacancy as complete will perform a number of actions within the system to
benefit departments and Institutions. A vacancy marked as complete will:
Be purged of applicant identifiable data automatically 12 months after the closing
date in accordance with the University’s recruitment document retention
policy(unless a the successful applicant required a Tier 2 CoS or the standard
Copyright © 2015 University of Cambridge Last Modified: January 2015 Page 80
Web Recruitment – Generating Correspondence
purging schedule has been overridden with approval from HR);
Have any successful candidate information saved as a PDF snapshot for future
use;
Not appear in a user’s list of vacancies (unless a user actively chooses for
complete vacancies to be displayed).
See the guide to Managing Vacancies and Applicants on the HR Systems pages for more details.
Recommended