View
217
Download
0
Category
Preview:
Citation preview
We have made every effort to ensure that at thetime of going to print all information in thiscatalogue is correct. However, in our efforts tocontinually improve our products and offer onlythe highest levels of security and quality we reservethe right to make alterations to the productspecifications shown in this catalogue.
All dimensions provided within this catalogue areapproximate and for guidance only.
Note
“Master Keyed” – indicates that designated locks can be operated by two different keys, one, the “Servant Key” operatesindividual locks, whilst the “Master Key” operates all locks. (This group of locks are referred to as a “Suite”, hencethe term “en-suite” locks). There are limitations to the number of locks that can be master keyed in asingle suite. We recommend that you consult your ASSA ABLOY technical sales consultant in this regard.
MK - Master Keyed
“Keyed Alike” – indicates that designated locks canbe manufactured to be operated by a single standardkey. Locks are described as being “Keyed Alike toStandard Differs”. Alternatively designated locksunder a Master Key or Grand Master Key systemcan also be keyed alike. These are described asbeing “Keyed Alike under Master Key” or “KeyedAlike under Grand Master Key”.
KA - Keyed Alike
“To Differ (i.e. Standard)” – indicates locks can besupplied with a standard range of different keys.The range of different keys available with Pin tumblercylinders is approximately 5000.
KD - To Differ (i.e. Standard)
“GD - Guaranteed Differs” – on special request, up to5000 locks can be supplied with each having a set of2 unique keys
GD - Guaranteed Differs
Key ing Opt ions
In t roduc t ionUNION offers a range of padlocks, which areideal for commercial, industrial and residentialuse.
The range includes open and closed shacklevariants to suit the particular application, togetherwith a choice of hardened steel or stainless steelshackles.
Introduction
UNION products are guaranteed for 1 year fromthe date of purchase against mechanical faultsarising from defects in materials or design. Inthe unlikely event of your UNION product failingas a result of defective materials or design afree replacement product will be provided.
It is a condition of this guarantee that yourUNION product: • Has been correct ly instal led and
maintained in accordance with theinstructions provided to you at thetime of purchase
• Has not been modified in any way
This guarantee does not apply to mechanicalfaults caused wilfully or negligently, or to thesurface finish of your product.
Proof of purchase must be submitted whenmaking a claim under this guarantee and allclaims must be submitted within 2 months ofyou discovering the mechanical fault of yourUNION product.
Gua ran tee
“ABC - Cascading Keying” – used by Electricity Utilitieswho use different keyed alike suites of padlocks tosecure HT, LT and Meter rooms/kiosks. Two or threelevels of access are offeredA - Highest Level (HT Rooms): A Key opens A, B and
C padlocksB - Middle Level (LT Rooms): B Key opens B and
C padlocksC - Lowest Level (Meter Reader): C Key opens
C padlocks only
ABC - Cascading Keying
Introduction
2
When the padlock is open the key cannot be removed
Key Retention
Open
Closed
Long
Shackle Type
Brass
Steel
Body Materials
HardenedSteel
HardenedBoron Steel
Shackle Materials
StainlessSteel
Ideal for use with: Hasps and staples and Security Chains
UnlockingOperating Mechanism
Locking
Key Snap
Key Key
or or
Funct ions and features
3
Padlock Product Coding System
Digits1 and 2
OO
AU
DM
DY
ED
ES
HS
MX
PM
UN
XP
Digits 3
Digits 4
2
3
4
5
8
9
Digits5 and 6
15
20
25
30
35
40
45
50
60
70
78
BRAND
Un-branded
Austen Locks
Ethekwini Municipality(Durban)
Yale DIY
Esco
Eskom
HAS
Maxidor
Phalaborwa Mining
Union
Xpanda
PRODUCT FAMILY
(Padlocks = 3)
PRODUCT CLASS
Light duty, brass body
Std duty, brass body
Heavy duty, brass body
Laminated steel body
Plastic Body (Modlok)
High Security, steel body
PRODUCT SIZE
15mm
20mm
25mm
30mm
35mm
40mm
45mm
50mm
60mm
70mm
78mm (Insurance)
Digits7 and 8
OO
21
22
23
24
25
26
31
32
33
34
4440
44
60
61
62
63
70
71
72
73
90
91
92
Digits 9
0
2
3
4
5
6
7
8
9
KEYING
Std KD 2keys
KA stock suite 11key ea
KA stock suite 21key ea
KA stock suite 31key ea
KA stock suite 41key ea
KA stock suite 51key ea
KA stock suite 61key ea
MK stock suite 12key ea
MK stock suite 22key ea
MK stock suite 32key ea
MK stock suite 42key ea
Guaranteed differs, 2 keys
Guaranteed differs, 2 keys
KA to reference 1 keyKA to reference(special instructions)
KA to reference(special instructions)
KA to reference(special instructions)
MK to reference 2 keys
Grand MK 2 keys
Great Grand MK 2 keys
ABC Keying, no keys
PMU, no pins, no keys
Locksmith’s format
Fixed Key
SHACKLE LENGHTH
Std Shackle
Long Shackle
Extra long Shackle
Extra, extra long Shackle
Other
Removable Shackle
Reslok Shackle
Modlok 28mm Shackle
No Shackle
Digits10 and 11
OO
02
03
07
10
11
43
44
45
46
47
48
49
50
52
53
54
55
56
81
82
83
90
92
93
98
99
KA
KD
MK
BODY TYPE / COLOUR
Standard
802
HAS Embossing
Austen Embossing
30mm long (5pin)
laminated Steel, galvanisedno colours
Eskom Green
Eskom Black
Eskom Orange
Black
Red
Blue
Yellow
Green
Orange
Brown
Sasol Blue
Germiston City Council yellow
Germiston City Council black
Discus body
882 Explosives body
Square body
Steel case
892 Exp body
393 High Security body
“Unisto” Lockseal
Lockseal
Keyed alike
Keyed to differ
Master Keyed
Digits12
O
1
2
3
4
5
6
7
Digits13
0
1
2
3
4
5
6
7
8
9
14
0
1
2
3
4
5
6
7
15
X
K
SHACKLE MATERIAL
Std Shackle
Brass
Stainless steel AISI 316
Boron
300mm chain
600mm chain
With chain attachment
KEY PROFILES
VO 1= 011,013, 015
Union
VO 2=023,025
VO 3=033,035 ;LH
VO LH
Yale
Esco
Union high security
Restricted
CES
PACKING
Boxed
DIY pack 1 per card
DIY pack 2 per card
DIY pack 3 per card
DIY pack 4 per card
DIY pack 6 per card
Bulk
Packed in sets of 48
Special instructions
Key retaining
UN332500000010
25mm Brass Pad lock
Application• Open shackle brass padlock for general application
Operation• Snap locking, key to unlock• Non key retention, shackle spring loaded• Shackle retained on opening
Standards• SABS 1533:1991
UN332500000010 13mm Standard Hardened Steel Shackle
4
Product Reference UN332500000010
Body Material Brass
Shackle Material Hardened Steel, 4mm Diameter
Mechanism 3 Pin Tumbler
Keying Options KA only
PWD Reference Number Not Applicable
Specifications
UN333000000000
5
30mm Brass Pad lock
Application• Open shackle brass padlock for general application
Operation• Snap locking, key to unlock• Non key retention, shackle spring loaded• Shackle retained on opening (removable shackle padlock
allows for shackle to be removed on opening)
Standards• SABS 1533:1991
UN333000000000 15mm Standard Hardened Steel ShackleUN333000200000 30mm Long Hardened Steel ShackleUN333000600000 75mm Removable Hardened Steel Shackle
Product References UN333000000000, UN333000200000, UN333000600000
Body Material Brass
Shackle Material Hardened Steel, 5mm Diameter
Mechanism 4 Pin Tumbler
Keying Options MK, KA, KD
Keyblank Number V01
Other Product Benefits Available in PMU Format
PWD Reference Number Not Applicable
Specifications
UN333000000000 illustrated
UN334000000000
6
40mm Brass Pad lock
Product References UN334000000000, UN334000200000, UN334000300000,UN334000400000UN334000600000, UN334000000200, UN334000200200
Body Material Brass
Shackle Material Hardened Steel / Stainless Steel, 6mm Diameter
Mechanism 5 Pin Tumbler
Keying Options MK, KA, ABC, KD, GD
Keyblank Number V03, 033
Other Product Benefits Available in PMU FormatAvailable in Locksmith’s Service Format
PWD Reference Number Not Applicable
Application• Open shackle brass padlock for general application
Operation• Snap locking, key to unlock.• Non key retention, shackle spring loaded• Shackle retained on opening (removable shackle padlock
allows for shackle to be removed on opening)
Standards• SABS 1533:1991
Specifications
UN334000000000 20mm Standard Hardened Steel ShackleUN334000200000 40mm Long Hardened Steel ShackleUN334000300000 50mm Long Hardened Steel ShackleUN334000400000 70mm Long Hardened Steel ShackleUN334000600000 100mm Removable Hardened Steel ShackleUN334000000200 20mm Standard Stainless Steel ShackleUN334000200200 40mm Long Stainless Steel Shackle
UN334000000000 illustrated
7
UN335000000000
50mm Brass Pad lock
UN335000000000 28mm Standard Hardened Steel ShackleUN335000200000 48mm Long Hardened Steel ShackleUN335000300000 95mm Long Hardened Steel ShackleUN335000600000 120mm Removable Hardened Steel ShackleUN335000000200 28mm Standard Stainless Steel ShackleUN335000200200 48mm Long Stainless Steel Shackle
Product References UN335000000000, UN335000200000, UN335000300000, UN335000600000,UN335000000200, UN335000200200
Product References UN335000000080 28mm Standard Hardened Steel Shackle(Restricted Key Profiles) UN335000200080 48mm Long Hardened Steel Shackle
UN335000300080 95mm Long Hardened Steel ShackleUN335000600080 120mm Removable Hardened Steel Shackle
Body Material Brass
Shackle Material Hardened Steel / Stainless Steel, 8mm Diameter
Mechanism 5 Pin Tumbler
Keying Options MK, KA, ABC, KD, GD
Keyblank Number V05, 035 and Restricted Key Profiles KS1101-KS1148
Other Product Benefits Available in PMU FormatAvailable in Locksmith’s Service Format
PWD Reference Number Not Applicable
Specifications
UN335000000000 illustrated
Application• Open shackle brass padlock for general application
Operation• Snap locking, key to unlock• Non key retention, shackle spring loaded• Shackle retained on opening (removable shackle padlock
allows for shackle to be removed on opening)
Standards• SABS 1533:1991
8
UN335000000010
50mm Brass Pad lock
Application• Open shackle brass padlock for use in Common
Keying System which includes mortice lock and rimcylinders (Key System )
Operation• Snap locking, key to unlock• Non key retention, shackle spring loaded• Shackle retained on opening
Standards• SABS 1533:1991
UN335000000010 28mm Standard Hardened Steel Shackle
Product Reference UN335000000010
Body Material Brass
Shackle Material Hardened Steel, 8mm Diameter (Stainless Steel, 8mm Diameter on request)
Mechanism 5 Pin Tumbler
Keying Options Available Keyed Alike, Master Keyed or Grand Master Keyed
PWD Reference Number Not Applicable
Specifications
9
3630-50
50mm Brass Pad lock
Application• Open shackle brass padlock for use in Common
Keying System which includes mortice lock and rimcylinders (Key System )
Operation• Snap locking, key to unlock• Non key retention, shackle spring loaded• Shackle retained on opening
Standards• SABS 1533:1991
3630-50 28mm Standard Hardened Steel Shackle
Product Reference 3630-50
Body Material Brass
Shackle Material Hardened Steel, 8mm Diameter (Stainless Steel, 8mm Diameter on request)
Mechanism 5 Pin Tumbler
Keying Options Available Keyed Alike, Master Keyed or Grand Master Keyed
PWD Reference Number Not Applicable
Specifications
10
60mm Brass Pad lock
Application• Open shackle brass padlock for general application
Operation• Snap locking, key to unlock• Non key retention, shackle spring loaded• Shackle retained on opening (removable shackle
padlock allows for shackle to be removed on opening)
Standards• SABS 1533:1991
UN336000000000
UN336000000000 35mm Standard Hardened Steel ShackleUN336000200000 50mm Long Hardened Steel ShackleUN336000300000 100mm Long Hardened Steel ShackleUN336000600000 50mm Removable Hardened Steel Shackle
Product References UN336000000000, UN336000200000, UN336000300000, UN336000600000
Product References UN336000000080 35mm Standard Hardened Steel Shackle(Restricted Key Profiles) UN336000200080 50mm Long Hardened Steel Shackle
UN336000300080 100mm Long Hardened Steel ShackleUN336000600080 50mm Removable Hardened Steel Shackle
Body Material Brass
Shackle Material Hardened Steel, 10mm Diameter
Mechanism 5 Pin Tumbler
Keying Options MK, KA, ABC, KD, GD
Keyblank Number V05, 035 and Restricted Key Profiles KS1101-KS1148
Other Product Benefits Available in PMU FormatAvailable in Locksmith’s Service Format
PWD Reference Number Not Applicable
Specifications
UN336000000000 illustrated
11
60mm Brass Pad lock
UN336000000010
Application• Open shackle brass padlock for use in Common
Keying System which includes mortice lock and rimcylinders (Key System )
Operation• Snap locking, key to unlock• Non key retention, shackle spring loaded• Shackle retained on opening
Standards• SABS 1533:1991
UN336000000010 35mm Standard Hardened Steel Shackle
Product Reference UN336000000010
Body Material Brass
Shackle Material Hardened Steel, 8mm Diameter (Stainless Steel, 8mm Diameter on request)
Mechanism 5 Pin Tumbler
Keying Options Available Keyed Alike, Master Keyed or Grand Master Keyed
PWD Reference Number Not Applicable
Specifications
12
UN337000000000
70mm Brass Pad lock
Application• Open shackle brass padlock for general application
Operation• Snap locking, key to unlock• Non key retention, shackle spring loaded• Shackle retained on opening
Standards• SABS 1533:1991
Product References UN337000000000, UN337000000080
Body Material Brass
Shackle Material Hardened Steel, 12mm Diameter
Mechanism 5 Pin Tumbler
Keying Options MK, KA, ABC, KD, GD
Keyblank Number V05, 035 and Restricted Key Profiles KS1101-KS1148
Other Product Benefits Available in PMU FormatRestricted Key Profiles
PWD Reference Number Not Applicable
Specifications
UN337000000000 42mm Standard Hardened Steel ShackleUN337000000080 42mm Standard Hardened Steel Shackle
(Restricted Key Profile)
13
50mm Insu rance Graded Brass Pad lock
Product References UN335000083000, UN335000083080
Body Material Brass
Shackle Material Hardened Steel, 10mm Diameter
Mechanism 5 Pin Tumbler
Keying Options MK, KA, ABC, KD, GD
Keyblank Number V05, 035 and Restricted Key Profiles KS1101-KS1148
Other Product Benefits Heavy BodyRestricted Key Profiles
PWD Reference Number Not Applicable
UN335000083000
Specifications
UN335000083000 28mm Long Hardened Steel Shackle “Chunky”UN335000083080 28mm Long Hardened Steel Shackle “Chunky”
(Restricted Key Profile)
Application• Open shackle brass padlock for general application
Operation• Snap locking, key to unlock• Non key retention, shackle spring loaded• Shackle retained on opening
Standards• SABS 1533:1991
14
78mm Insu rance Graded Brass Pad lock
Application• Closed shackle brass padlock for general application
Operation• Key to lock and unlock• Key retention• Shackle retained on opening
Standards• SABS 1533:1991
UN337800000000
UN337800000000 Concealed Hardened Steel ShackleUN337800000080 Concealed Hardened Steel Shackle
(Restricted Key Profile)
Product References UN337800000000, UN337800000080
Body Material Brass
Shackle Material Hardened Steel, 13mm Diameter
Mechanism 5 Pin Tumbler
Keying Options MK, KA, ABC, KD, GD
Keyblank Number V05, 035 and Restricted Key Profiles KS1101-KS1148
Other Product Benefits Hardened Rotating Locking PinRestricted Key Profiles
PWD Reference Number Not Applicable
Specifications
15
78mm Armoured Brass Pad lock
Application• Closed shackle brass padlock for general application
Operation• Key to lock and unlock• Key retention• Shackle retained on opening
Standards• SABS 1533:1991
UN337800090000
UN337800090000 Concealed Hardened Steel ShackleUN337800090080 Concealed Hardened Steel Shackle
(Restricted Key Profile)
Product References UN337800090000, UN337800090080
Body Material Brass with Chrome Plated Hardened Steel Jacket
Shackle Material Hardened Steel, 13mm Diameter
Mechanism 5 Pin Tumbler
Keying Options MK, KA, ABC, KD, GD
Keyblank Number V05, 035 and Restricted Key Profiles KS1101-KS1148
Other Product Benefits Hardened Rotating Locking PinRestricted Key Profiles
PWD Reference Number Not Applicable
Specifications
16
45mm Ny lon Pad lock (Mod lok )
Application• Open shackle nylon padlock for general application
Operation• Snap locking, key to unlock• Non key retention, shackle spring loaded• Shackle retained on opening
UN3845000XX2Y0
Product References UN3845000XX2Y0, UN3845008XX2Y0, UN3845002XX2Y0
Body Material Glass Reinforced Nylon
Shackle Material Stainless Steel, 6mm Diameter
Mechanism 5 Pin Tumbler
Keying Options MK, KA, ABC, KD, GD
Keyblank Number (Y) 0 - V01, 3 - 033
Colour Options (XX) 46 Black, 47 Red, 48 Blue, 49 Yellow, 50 Green, 52 Orange, 53 Brown
Other Product Benefits Safety PadlockFlame Retardant
PWD Reference Number Not Applicable
Specifications
UN3845000XX2Y0 20mm Standard Stainless Steel Shackle (316 Grade)UN3845008XX2Y0 28mm Long Stainless Steel Shackle (316 Grade)UN3845002XX2Y0 40mm Long Stainless Steel Shackle (316 Grade)
UN3850000XX2Y0 illustrated
17
50mm Ny lon Pad lock (Mod lok )
Application• Open shackle nylon padlock for general application
Operation• Snap locking, key to unlock• Non key retention, shackle spring loaded• Shackle retained on opening
UN3850000XX2Y0
UN3850000XX2Y0 20mm Standard Stainless Steel Shackle (316 Grade)UN3850002XX2Y0 48mm Long Stainless Steel Shackle (316 Grade)
Product References UN3850000XX2Y0, UN3850002XX2Y0
Body Material Glass Reinforced Nylon
Shackle Material Stainless Steel, 8mm Diameter
Mechanism 5 Pin Tumbler
Keying Options MK, KA, ABC, KD, GD
Keyblank Number (Y) 0 - V01, 1 - Union KB Series, 3 - 035
Colour Options (XX) 46 Black, 47 Red, 48 Blue, 49 Yellow, 50 Green, 52 Orange, 53 Brown
Other Product Benefits Safety PadlockFlame Retardant
PWD Reference Number Not Applicable
Specifications
UN3850000XX2Y0 illustrated
60mm Rota lok Pad lock
Application• Open shackle brass padlock for high security applications
with Boron Steel Shackle and Rotating Steel Outer Jacket
Operation• Snap locking, key to unlock• Non key retention, shackle spring loaded• Shackle retained on opening
Standards• SABS 1533:1991• Also available to military specification
UN396040090480
18
UN396040090480 Boron Steel Shackle (Restricted Key Profile)
Product Reference UN396040090480
Body Material Brass with Rotating Steel Outer Jacket
Shackle Material Hardened Boron Steel, 10mm Diameter
Mechanism 5 Pin Tumbler
Keying Options KD, KA, MK, ABC, GD
Keyblank Number Restricted Key Profiles KS1101-KS1148
Other Product Benefits Restricted Key ProfileRotating Steel Jacket2 Rotating, 6mm Diameter, Hardened Steel Anti Cutting PinsHardened Steel Base to protect Barrel
PWD Reference Number Not Applicable
Specifications
70mm Stainless Steel Discus Padlock
Application• Closed shackle stainless steel padlock for security application
Operation• Snap locking, key to unlock• Non key retention, shackle spring loaded• Shackle retained on opening
UN397000581010
UN397000581010 70mm Closed Shackle
Product Reference UN397000581010
Body Material Stainless Steel
Shackle Material Hardened Steel
Mechanism 5 Pin Tumbler
Keying Options KD, MK, KA
Keyblank Number Y400 Series
PWD Reference Number Not Applicable
Specifications
19
20
40mm Laminated Steel Padlock
Application• Open stainless steel shackle padlock for general application
Operation• Snap locking, key to unlock• Non key retention, shackle spring loaded• Shackle retained on opening
UN3540008XX2YO
UN3540008XX2YO Laminated Steel Padlock
Product Reference UN3540008XX2Y0
Body Material Zinc Plated, Laminated Steel Plates with weatherproof, coloured plastic jacket & protective boot
Shackle Material Stainless Steel (316 Grade)
Mechanism 5 Pin Tumbler
Keying Options KD, MK, KA, ABC, GD
Keyblank Number (Y) 0 - V01, 1 - Union KB Series, 3 - 033
Colour Options (XX) 46 Black, 47 Red, 48 Blue, 49 Yellow, 50 Green, 52 Orange, 53 Brown
Other Product Benefits Safety Padlocks
PWD Reference Number Not Applicable
Specifications
21
LX1964
Pad lock Lock ing P la te
LX1964 Locking Plate for 6 Padlocks
Specifications
Product Reference LX1964
Body Material Steel
Shackle Material Red Painted
PWD Reference Number Not Applicable
Application• Safety Lockout plate used to lock an electricity box whilst
repairs are being done
Operation• The plate is attached to an electrical box to lock it after power has been disconnected• The plate can be locked using between 1 and 6 padlocks allowing numerous workmen
to conduct maintenance simutaneously in safety• Additional locking plates can be added to the same box should they be required
Recommended