View
231
Download
0
Category
Preview:
Citation preview
8/2/2019 Om Final PPT
1/18
SRI BHAGIRATH TEXTILES LTD,
NAGPUR
Presented By:Group : 3
Ayushi Garg (2011052)
Gagan Bhatia (2011073)
Harleena Bhela (2011087)
Sheetal Saxena (2011255)
Presented to:Prof. Manimay Ghosh
8/2/2019 Om Final PPT
2/18
INTRODUCTION
Established in 1996 ,expanded in fully automated plant in 2006.
Use of the high quality material & machinery.
Provide range of yarns to the customers in different sizes and thickness
Engaged in the manufacturing and supply ofCotton yarn, Open end yarnand Ginned cotton yarn.
2 operational plants-
a)Labor intensive plant employing 350 workers established in
1996b)Fully-automated plant employing 50 workers established in
2006.
Average Daily production-12 tonnes/day
90% production exported to Brazil, Australia ,etc.
The costing of the yarn is based on:1. Raw material usage
2. Electricity Unit usage
3. Maintenance Cost
4. Wages\Salary
8/2/2019 Om Final PPT
3/18
OPERATIONS
Continuous production.
Product layout: Machines set according to the
sequence of operations.
Fixed-time Model.
Make to order model.
8/2/2019 Om Final PPT
4/18
Labor Division
3 Labor shifts
a)7am-3pm
b)3pm-11pm
c)11pm-7am
Division of Labor-based on the nature of work1.Contractual-Packaging
2.Permanent:Engineering,maintenance,HR,administration
Wages paid on daily basis.
8/2/2019 Om Final PPT
5/18
Quality parameters
ColorPrimarily determined by conditions of temperature and/or humidity, cotton lint
exposure to sunlight, and cotton varieties. The color of cotton ranges from whiteto yellowish and is classed into the groups "White", "Light Spotted", "SpottedTinged" and "Yellow Stained", in descending order of quality
Length
Weather, nutrient deficiencies, as well as excessive cleaning and/or drying at thegin may also affect the fiber length.
UniformityLength uniformity is the ratio between the mean length and the upper half meanlength of the cotton fibers within a sample
Strength
The fiber strength measurement is made by clamping and breaking a bundle offibers from the same beards of cotton that are used for measuring fiber length.Results are reported in terms ofgrams per tex (tex unit =weight in grams of 1,000meters of fiber). It expresses the force required to break a bundle of fibers onetex unit in size. Fiber strength is largely determined by variety.
8/2/2019 Om Final PPT
6/18
They control quality through 5 different
departments:
1. Engineering2. Maintenance
3. Production
4. HR5. Excise
8/2/2019 Om Final PPT
7/18
1.Raw material1. RAW MATERIAL
Raw material is the form of ginned cotton.
There major suppliers are Reliance, Grasim &
Indorama.
It is ordered 6months in advance.1 cotton candy = 172-180 bale.
The cotton after being collected from field is sent for
ginning and pressing.
The cotton arrives in the plant after the aboveprocess.
8/2/2019 Om Final PPT
8/18
2.Blow Room Section2. BLOW ROOM SECTION
This section has 3 partsa) Loosening
b) Filtering
c) Buffer/ storage
8/2/2019 Om Final PPT
9/18
LOOSENING
Ginned cotton is loosened manually. Suitable atmospheric temperature is
maintained.
8/2/2019 Om Final PPT
10/18
FILTERING
Loosened cotton is filtered to remove any impurities.The impurities are collected in a separate dump box.
The cleaned cotton is moved ahead in the process for
conversion into finished material.
8/2/2019 Om Final PPT
11/18
STORAGE & BUFFER
The cleaned cotton is moved through pipelines to
the storage area.The cotton is further moved through these boxes to
the next step of process.
In case of shortage of material there is a buffer
stock which is stored in the lower
half of these boxes so that process doesnt comes
to a haul.
8/2/2019 Om Final PPT
12/18
3.Carding system3. CARDING SYSTEM
After cotton runs through the blow run section it is
then sent through pipes for further processing.
The cotton is processed on Trutzschler machine.
There are 12 machines which are operated by 2
workers.These machines compress the cotton into sheet
form.
The machines are used to extract cotton sliber from
it.
Cotton sliber is then rolled on drums.
It takes 4 hours for this process .
8/2/2019 Om Final PPT
13/18
4.Draw family4. DRAW FAMILY
Cotton rolled on these drums is then taken to lab tocheck their quality.
Then these 24 cotton sliber drums are taken to draw
family machine manually.
These machines convert cotton from different sliber into
1 single sliber.
The specifications for the quality are entered in the
machine.6 machines operated by 2 workers.
8/2/2019 Om Final PPT
14/18
5.Auto Care Section5. AUTO CARE SECTION
After being converted into single sliber it is tested again in
lab.360 machines are placed to complete this process.
Finally the sliber is rolled in the form of yarn.
1m of the cotton sliber = 100m yarn
Uniform thicknessThe rolled yarns are steamed for 2 hours in the Seiger
machine.
8/2/2019 Om Final PPT
15/18
Packaging6.PACKAGINGManual.
Moisture control. Different color coding.
8/2/2019 Om Final PPT
16/18
Waste elimination
Approximately 5% waste.Waiting time minimized.
Recycling of waste except at final step.
Dedicated engineers and maintenance staff for every
machine responsible in case of breakdown.
8/2/2019 Om Final PPT
17/18
CONCLUSION
Pros
Cost & time saving.
Uniform Quality.
High Utilization & low wastages.
Dedicated Staff.
Continuous production.
Cons
Strength of the cotton yarn from automated plantis less than that of the labor-intensive plant.
Inventory is ordered 6 months in advance.
8/2/2019 Om Final PPT
18/18
THANK YOU
Recommended