Oval front grip Grabber

Preview:

Citation preview

© Plymovent AB reserves the right to make design changes.

MODEL INFO

SHIPPING DATA

370x250x420mm

Product name Article number

OFGG-100/200 90300-1011

OFGG-125/200 90305-1011

APPROVAL CERTIFICATIONS

PROPERTIES

Material:- Housing

Galvanized steel, Rubber

Weight : 2,4 kg

Ø100/125

To be used for oval tailpipes with a protrusion from the chassis of +/- 42mm and with outside dimensions of +/- 155

the special Grabber® clip to connect.

Oval front grip Grabber ®

The Plymovent Oval front grip Grabber® is designed to connect tooval tailpipes with a minimal protrusion from the chassis. Due to several unique product features, as changedspecial clip the Grabber® functions as any other Gabber®.

For a proper connection it is important to connect the grabber in the following sequence:1. Place the upper edge of the Grabber® on the upper end of the tailpipe.

2. Move the lower part of the Grabber® around the tailpipe. The clip will connect

Grabber® which locks the clip �rmly behind the tailpipe �ange.

4. The Grabber® disconnect is automatic, in line with a normalGrabber® nozzle.

APPLICATIONS

Temperature resistance: 150°C/300°F continuous 200°C/390°F intermittent

AMBIENT CONDITIONS

TIN_MDB_090511_EN

USE