Papercraft Airbus

Making the X3 papercraft is simple!

First print the model. Then cut, fold and glue it to have your very own X3!

Average time required: 5 hours.

Help

Metalic rulerTo be used to cut

straight lines.

BrushTo apply glue on the paper.

Cutter, blade or scissorsBlade is prefered to make

precise cuts.

White glue Preferable because it does not damage the ink on the paper.

Paper knife or flat objectTo fold the paper neatly.

Felt tip pensto color the thickness of paper edges.

Cutting mate.

Use A4 Sheets of paperSize : 21*29.7mm)

Weight : 160 to 180 grs/M2Avoid too thin, fragile,

and difficult to fold paper.

Tweezers to handlesmall parts

Glue a weight such as awire, paperclip or a coinon the front edge.

Stage 2Fold theparts.Checkmountainand valleyfoldings.

mountain valley

Step numberPicture:Final assembliesare illustrated

9

Stage 1Cut thepartsrequired inthe step..

Stage 3Glue theparts.The stepis finished.

Step numberPicture:Final assembliesare illustrated

1

4

7 8 9

5 6

2 3

10

13

16

19 20 21

17 18

14 15

11 12

22 23

25 26

+

24