View
1
Download
0
Category
Preview:
Citation preview
Visit us at www.dekoroncable.com
Instrument Pairs/triads
Thermocouple Extension grade
High Temperature
Control UL - multi-conductor
CSA - multi conductor (Teck 90®)
UL 1309 Shipboard Instrumentation, Type X Cables, 300V or 600V
Foundation Field-Bus Cables 2-Way digital communication cable
Circuit Integrity Instrument and Control Cable
Sensor Cables UL - multi-conductor (Power-Gen industry)
UL: 300V or 600V, PLTC/ITC, ICEA S-73-532 C(UL) Type ACIC 600V CSA CIC (600V) ACIC AS/NZS 5000.1 – 600/1000V AS/NZS 5000.3 – 450V /750V AS/NZS 3808 UL:PLTC
UL Type TC (Tray Cable) UL Type MC (Metal Clad) ICEA S-73-532 AS/NZS 5000.1 – 600/1000V AS/NZS 5000.3 – 450V /750V AS/NZS 3808
CSA CIC 600V
TC-ER UL 1309 IEEE 1583
FF-844 H1 and IEC 61158-2 ITC, PLTC ITC-ER, PLTC-ER,
UL PLTC/ITC ICEA S-73-532 UL Type TC (Tray Cable) IEC 60331
UL Type TC (Tray Cable)
Shield Options
22-12 AWG Bare and Plated Copper,
solid and stranded
Type KX, JX, EX, TX, NX AND SX 20-16 AWG, solid and stranded
Copper or Thermocouple conductors as indicated above.
20-6 AWG
14-10 AWG
AWG 22 - 10 (300V) AWG 18 - 10 (600V)
16-18 AWG
20-10 AWG
16-10 AWG, Copper & plated Cu
PVC PVC/Nylon XLPE (Cross-linked PE) TPE (Thermoplastic Elastomer)
FEP (200°C) PFA (260°C)
PVC PVC/Nylon
XLPE Silicone
PVC XLPE
XLPE
XLPE or HDXLPE
Silicone Alloy
PVC PVC/Nylon Fluopolymers (FP)
* Armor designations
PVC CPE LSZH PE
FEP PFA
PVC CPE
LSZH
PVC
PVC
PVC CPE TPN (LSZH)
Thermo-Plastic Zero-Halogen
PVC CPE FP
SWA, ILA, ILGS, DKB, CCWA (Gardex), SS
SS
Only UL Type MC allows ILA, ILGS and CCWA
ILA, ILGS
N/A
ILGS, ILA, DKB, CCWA
SWA, ILA, ILGS, DKB, CCWA (Gardex), SS
SS
1 to 100 Pairs 3.7" max diameter for jacketing, 3.25" max dia for SWA, 1.75" max dia for ILGS & .800" max dia for CCWA
Contact us
Same as instrumentation cables (depending on gage)
Single and multi pair
** Approval standards: Not all approvals are available for all combinations of insulation and armor types
ILA Interlocked Aluminum ILGS Interlocked Galvanized Steel SWA Served Wire Armor (Galvanized Steel) DKB Dekabon Chemical/Moisture Barrier (Zetabon)CCWA Gardex ® Continuously Corrugated & Welded AlSS Stainless Steel Overbraid
**
Available upon Request:
"-50°C Arctic Grade" jacket -40°C UL approved cables ITC-ER, PLTC-ER, Direct Burial, Low Smoke Zero Hal
TC-ER MC-HL
Cables pass IEC 60331 90 minutes 750°C and Modified Hydro Carbon Fuel test (1100°C for 20 minutes)
ATEX and IECEx Compliant, Gas-Block™ Cables
Ind and O/A, Al/Poly taped shield. Copper and bronze tapes, Braided copper and plated copper
Instrumentation cables come in multiple twisted pair configurations with each pair gathering one set of process data. Our cables are used worldwide in petro-chemical and refining industries, such as BP, Valero, Exxon, Aramco, Conoco-Phillips and Star Petroleum. We have a large number of part numbers in stock, but we can also build cables with any of your specific customizations.
Instrumentation Cables
Multi-pair instrumentation cable with individual and overall shield
Multi-pair instrumentation cable with served wire armor of galvanized steel
We have the most reputed brand name for instrumentation cables. Dekoron Wire and Cable pioneered the development of instrumentation cables for process industry starting in the 1940’s. These cables monitor process parameters such as pressure, flow speed, temperature and transmit low voltage signals to the instrumentation and process control room.
Fieldbus cable are all digital, two way, multi-drop communication cables used in field instruments and control systems.
Field Bus Cables
Control Cables
When regulatory requirements do not mandate conventional metal armor, braided stainless steel is a less expensive option. Stainless steel braid will provide excellent abrasion resistance and flexibility.
Braided Stainless Steel
Stainless Steel Over Braid
Visit us at www.dekoroncable.com
Dekoron offers a wide range of specialty and composite cables that will suit your needs. We can also provide a combination of data (Cat5 or Cat6) cables and fiber cables along with instrumentation cables under one common armor.
Specialty and Composite Cable
Cable with power, data and tubing components with served wire armor
Custom Cable Category Cable with Gardex armor
The Gardex armor meets the UL MC-HL, Class I Division I criteria and is widely popular in the US for hazardous location applica-tions. We have the ability to apply this type of armor to a variety of cables. See CCWA armor in the data tables.
Gardex® Cables
Recommended