View
3
Download
0
Category
Preview:
Citation preview
www.hgg-group.com
PCL | Highly Productive Profile Cutting Line
High Throughput On-the-fly material detection by measuring rollers and gripper
Improved Welding Speed and Quality Integrated edge cleaning line
Compact Cutting CellProvides a clear overview for the ope-rator. Features on-the-fly measuring, fume extraction and a Stäubli robot
Traceability and Easy Fit-Up Integrated text, weld line andbend line marker
Multipe outfeed stationsSlatbelt with outfeed table for small parts and roller conveyor with chains for long parts
Middle East, India & AfricaEurope & Russia
Mr. Anil Kumar GaddameediRegional Sales Manager
E: hggme@hgg-group.comT: (+971) 55 8077 643T: (+91) 770 2055 222
Mr. Daan van DeeRegional Sales Manager
E: sales@hgg-group.comT: (+31) 61 1884 755T: (+7) 915 0726 523
Local contactsAsia Pacific Americas
Mr. Leonardo GonRegional Sales Manager
E: asiapacific@hgg-group.comT: (+86) 136 8163 2558T: (+63) 822 824 500
Mr. John TutinoRegional Sales Manager
E: americas@hgg-group.comT: (+1) 330 461 6855
I: www.hgg-group.comT: (+31) 0227 50 40 30 F: (+31) 0227 50 19 03
HGG Profiling Equipment bvSpecialists in 3D Profiling
Contact us and configure your machine!
The PCL is a Profile Cutting Line that is developed to cut stiffener profiles used in the ship building industry. This machine is equipped with a robot which is capable of full three-dimensional cutting. This means that all cuts can have a bevel and/or angularity.
The PCL is capable of cutting all profiles commonly used in the ship building industry and, if special cuts are required, HGG can develop extra profiling shapes on request.
www.hgg-group.com
PCL | Highly Productive & Accurate Profile Cutting Line
HGG provides brush- and shot blast units that clean all three faces of the material. These machines are especially designed for cleaning ship stiffeners at variable angles.
Edge cleaning systems
Having on-the-fly measuring by rollers and the gripper, the need for an extra measurement cycle is eliminated.
On the fly measurement
By using a gripper for longitudinal movement, there is no need for a slow and big industrial robot. Furthermore, the material’s position is always known.
Gripper
HGG will provide an in-house developed postprocessor with all required cutting shapes, matching your requirements. Custom shapes are available as well.
Software/Programming
The closed cutting cell includes inside noise absorption material to reduce noise outside the cutting cabin. Furthermore, it has very effective fume extraction.
Cutting cell
HGG can also provide a magnetic loading crane for efficient loading and unloading of profiles and cut parts.
Magnetic crane
Equal angle Unequal angle T-bar Bulb/HP Flat bar
PCL 600
max: 150 x 150 mm
max: 6” x 6”
max:550 x 150 mm
max: 22” x 6”
max width: 550 mm
max width:22”
max:550 x 15 mm
max:22” x 0.6”
max width: 550 mm
max width: 22”
Recommended