View
215
Download
0
Category
Preview:
Citation preview
8/3/2019 Ppt2 Foi Ig Training Regulations 2011
1/33
FUNDAMENTALS OFINSTRUMENTATION
(IMT 4)
RM MFI 27
MFI FOUNDATION, INC.TECHNOLOGY PROGRAM MANAGEMENT DEPARTMENT
DTS MECHATRONICS TECHNOLOGY
COURSE TITLE:
INSTRUCTOR: MAURO ROGEL B. BARROGA
PROGRAM TITLE:
8/3/2019 Ppt2 Foi Ig Training Regulations 2011
2/33
COURSE OUTLINE:TOPIC SCHEDULEWEEK TOPIC WEEK TOPIC
01 COURSE INTRODUCTION 10INSTRUMENTATION AND CONTROL DEVICES:
SENSORS / TRANSDUCERS /TRANSMITTERS (Part 3)
02 TESDA TVETTRAINING REGULATION
TERMINOLOGIES
11INSTRUMENTATION AND CONTROL DEVICES:
INDICATORS / RECORDERS /CONTROLLERS/ ACTUATORS
03 TESDA TVETCOMPETENCY ASSESSMENT PRINCIPLES
12 CORE COMPETENCY:INSTALL INSTRUMENTATION AND
CONTROL DEVICES(PART-1)
04 I & C SERVICING NC IICOMPETENCY STANDARD
13 CORE COMPETENCY:INSTALL INSTRUMENTATION ANDCONTROL DEVICES (PART-2)
05 MINOR EXAM A 14 MINOR EXAM B
06 INSTRUMENTATION TERMINOLOGIES 15 CORE COMPETENCY:CALIBRATE INSTRUMENTATION AND
CONTROL DEVICES (PART-1)
07 INSTRUMENTATION AND CONTROL DEVICES:SENSORS / TRANSDUCERS /
TRANSMITTERS (Part 1)
16 CORE COMPETENCY:CALIBRATE INSTRUMENTATION AND
CONTROL DEVICES (PART-2)
08 INSTRUMENTATION AND CONTROL DEVICES:SENSORS / TRANSDUCERS /
TRANSMITTERS (Part 2)
17 CORE COMPETENCY:CONFIGURE INSTRUMENTATION AND
CONTROL DEVICES
09 MIDTERM EXAMS 18 FINAL EXAMS
8/3/2019 Ppt2 Foi Ig Training Regulations 2011
3/33
TOPIC - 2:
TESDA T-VETTRAINING REGULATION
8/3/2019 Ppt2 Foi Ig Training Regulations 2011
4/33
PHIL. EDUC. SYSTEM
8/3/2019 Ppt2 Foi Ig Training Regulations 2011
5/33
T ECHNICALE DUCATION AND
S KILLSD EVELOPMENTA UTHORITY
8/3/2019 Ppt2 Foi Ig Training Regulations 2011
6/33
TESDA
The Technical Education and SkillsDevelopment Authority (TESDA) wasestablished through the enactment of RepublicAct No. 7796 otherwise known as the
"Technical Education and Skills Development Act of 1994 ", which was signed into law byPresident Fidel V. Ramos on August 25, 1994.This Act aims to encourage the full
participation of and mobilize the industry,labor, local government units and technical-vocational institutions in the skills development of the country's human resources .
8/3/2019 Ppt2 Foi Ig Training Regulations 2011
7/33
T ECHNICALVOCATIONAL
E DUCATION ANDT RAINING
8/3/2019 Ppt2 Foi Ig Training Regulations 2011
8/33
TVET
Technical and Vocational Education andTraining (TVET) is concerned with theacquisition of knowledge and skills for theworld of work.
The UNESCO-UNEVOC International Centre forTechnical and Vocational Education andTraining based in Bonn Germany assists
UNESCO's 193 member states strengthen andupgrade their TVET systems.
8/3/2019 Ppt2 Foi Ig Training Regulations 2011
9/33
P HILIPPINET VET
Q UALIFICATIONF RAMEWORK
8/3/2019 Ppt2 Foi Ig Training Regulations 2011
10/33
PTQF
8/3/2019 Ppt2 Foi Ig Training Regulations 2011
11/33
11
National Certificateis a certification issued to individualswho achieve all the required units of competency for a national qualificationdefined under the Training Regulations.NCs are aligned to specific levels withinthe PTQF.
Levelrefers to the category of skills andknowledge required to do a job.
8/3/2019 Ppt2 Foi Ig Training Regulations 2011
12/33
PTQFNC I: Performs routine and predictable
tasks involving little or no latitude for judgement .
NC II: Performs prescribed range of functions involving known routine andprocedures .
NC III: Performs a wide range of skilledoperations at a high level of competence involving known routineand procedures .
NC IV: Performs a wide range of applicationin a variety of context and non
routine .
8/3/2019 Ppt2 Foi Ig Training Regulations 2011
13/33
TRAINING REGULATIONS:
8/3/2019 Ppt2 Foi Ig Training Regulations 2011
14/33
TRAINING REGULATION
prescribed minimum training programstandards ;developed by experts and practitioners from
public/private sector ( Experts Panel );
promulgated by the TESDA Board afternational validation ;prescribed occupational skills standards ;included duties and tasks attached to a job
title and expressed as competencies; andserved as basis for designing job-oriented
curricula with specific competencyobjectives.
8/3/2019 Ppt2 Foi Ig Training Regulations 2011
15/33
15
Section 1: Qualification
Section 2: Competency StandardSection 3: Training StandardsSection 4: Assessment & Certification
PARTS OF TRAINING REGULATION:
8/3/2019 Ppt2 Foi Ig Training Regulations 2011
16/33
16
This section defines the objectivesof the training regulation,
Identifies all the unit of competency defined incompetency standard, and
Identify the title of person whopossessed the followingcompetencies.
SECTION 1:QUALIFICATION
8/3/2019 Ppt2 Foi Ig Training Regulations 2011
17/33
17
is a cluster of units of competenciesthat meets job roles , and are
significant in the workplace. It is alsoa certification awarded to a person onsuccessful completion of a course in
recognition of having demonstratedcompetencies in an industry sector.
SECTION 1:QUALIFICATION
8/3/2019 Ppt2 Foi Ig Training Regulations 2011
18/33
18
SECTION 2:COMPETENCY STANDARD
is the industry-determinedspecification of competencies
required for effective workperformance.
8/3/2019 Ppt2 Foi Ig Training Regulations 2011
19/33
19
SECTION 2:COMPETENCY
is the possession andapplication of knowledge, skills
and attitudes to perform workactivities to the standard
expected in the workplace.
8/3/2019 Ppt2 Foi Ig Training Regulations 2011
20/33
20
PARTS OF UNIT OF COMPETENCY:1. UNIT TITLE2. UNIT DESCRIPTOR3. ELEMENT4. PERFORMANCE CRITERIA5.
RANGE OF VARIABLES6. EVIDENCE GUIDE
SECTION 2:
8/3/2019 Ppt2 Foi Ig Training Regulations 2011
21/33
21
UNIT OF COMPETENCY
Is a component of the competencystandards stating a specific key
function or role in a particular jobor occupation ; it is the smallest component of achievement that
can be assessed and certifiedunder the PTQF.
8/3/2019 Ppt2 Foi Ig Training Regulations 2011
22/33
22
UNIT OF DESCRIPTOR
Outlines what is done in theworkplace ; expands on informationin the title; clarifies scope andintent of the unit; it helps todifferentiate between units withsimilar titles.
8/3/2019 Ppt2 Foi Ig Training Regulations 2011
23/33
23
ELEMENTS
are the building blocks of a unit of competency. They describe in outcometerms the functions that a person
perform in the workplace.
PERFORMANCE CRITERIA
are evaluative statements that specifywhat is to be assessed and the requiredlevel of performance.
8/3/2019 Ppt2 Foi Ig Training Regulations 2011
24/33
24
RANGE OF VARIABLESDescribes the circumstances inwhich the work is to be performed.
VARIABLE RANGE1. OH & S policies
and procedures1. OH & S guidelines2. Philippine environmental standards
2. Instrumentationand ControlStandards
Includes but not limited to:1. ISA (Instrumentation, Systems and
Automation) Society (formerly Instrument Society of America)
2. ANSI (American National StandardsInstitute)
3. ASME (American Society of MechanicalEngineers)
4. NEC (National Electrical Code)5. IEC (International Electro-technical
Commission)
8/3/2019 Ppt2 Foi Ig Training Regulations 2011
25/33
25
EVIDENCE GUIDE
is a component of the unit of competency that defines or identifiesthe evidences required to determine the
competence of the individual. It provides information on critical aspects of competency, underpinning knowledge, underpinning skills,resource implications, assessment method and context of assessment .
8/3/2019 Ppt2 Foi Ig Training Regulations 2011
26/33
26
Critical Aspect of Competency
refers to the evidence that isessential for successfulperformance of the unit of competency.
8/3/2019 Ppt2 Foi Ig Training Regulations 2011
27/33
27
Underpinning Knowledge
refers to the competency that involves in applying knowledgeto perform work activities. It includes specific knowledge
that is essential to theperformance of thecompetency.
8/3/2019 Ppt2 Foi Ig Training Regulations 2011
28/33
28
Underpinning Skill
refers to the list of the skillsneeded to achieve the elementsand performance criteria in theunit of competency. It includes
generic and industry specificskills.
8/3/2019 Ppt2 Foi Ig Training Regulations 2011
29/33
29
Resource Implication
refers to the resources needed for the successful performanceof the work activity described inthe unit of competency. It
includes work environment andconditions, materials, tools andequipment.
8/3/2019 Ppt2 Foi Ig Training Regulations 2011
30/33
30
Context of Assessment
refers to the place whereassessment is to be conductedor carried out.
Method of Assessmentrefers to the ways of collecting
evidence and when, evidenceshould be collected.
8/3/2019 Ppt2 Foi Ig Training Regulations 2011
31/33
31
This section defines the curriculumdesign,defines the training delivery ,
defines the training entry requirement,identifies the list of tools, equipment andmaterials,defines the trainers qualification,defines the prescribed specification of the training facility,describes the institutional assessment.
SECTION 3:TRAINING STANDARDS
8/3/2019 Ppt2 Foi Ig Training Regulations 2011
32/33
32
This section defines the national
qualification for assessmen t in the job title according to the trainingregulation,
Defines the means to successfullypass the national assessment.
SECTION 4:NATIONAL ASSESSMENT AND
CERTIFICATION ARRANGEMENTS
8/3/2019 Ppt2 Foi Ig Training Regulations 2011
33/33
END OF PRESENTATION
RM MFI 27
MFI FOUNDATION, INC.TECHNOLOGY PROGRAM MANAGEMENT DEPARTMENT
Recommended