Pro-seal Products, inc. Bringing you Quark-NanoTech Polycarbon/Polycarbonate Infused Technology...
Preview:
Citation preview
- Slide 1
- Pro-seal Products, inc. Bringing you Quark-NanoTech
Polycarbon/Polycarbonate Infused Technology Solutions
- Slide 2
- Strategic Alliance ourWORLD has developed a Strategic Alliance
with ICP- Proseal of America bringing amazing Quark-Nano-
technology Polycarbon / Polycarbonate infused products for the
repair, remediation and/or transformation of Concrete Steel Wood
Glass
- Slide 3
- Nano-Tech Products Unveiled Polycarcarbon/Polycarbonate
Nano-technology products are innovative, hi-tech, high density,
high molecular weight, elastoglazioplast material compounds for
remediation, restoration, waterproofing, water repelling, coating
and/or sealing of concrete, metal, glass, wood and most all solid
composition materials on earth and beyond. Polycarbon/Polycarbonate
compounds create molecular, chemical and mechanical bonds which are
vastly superior to all other known products such as urethanes,
epoxies, polyureas, sulfides and others, all of which merely bond
mechanically.
- Slide 4
- Hydrocarbon cross linked technologies with Cross-Polymers
rubber band connecting rocks Vitriform Polycarbon/Polycarbonate
Technology with Cross-Polymers complete vitriform technology
POLYCARBON/POLYCARBONATE VS HYDROCARBONS
- Slide 5
- Nano technologya particle size of 1 billionth of a meter cubed.
These particle sizes allow built-in deliberate designed behavior in
chemical formulation. Nano-Technologies Tetrahedron Stacking
Hexahedron Stacking Helix Formation By combininng Tetrahedron and
Hexahedron formations
- Slide 6
- Vast Cost Savings Applications Facilities Building
Envelope
- Slide 7
- Top 10 Pro-seal Products 1.DP36-Concrete infrastructure
contaminant remediation 2.PS34-Caulking seals thru running water,
oil, even WD40 3.Ultra-Shield IIA- Hydrocarbon Protection & UV
Resistant film sealer 4.SP12-Breathable penetrating sealer for
porous substrates 5.DG7-Powerful Non-solvent Degreaser, dissolves
even mastic 6.Power Patch-Spall repairs, Injection, Casting 23,000
PSI 7.AquaCrete-Screed coat for Negative side repairs
8.ProThane-230-Joint or crack caulking 9.RC850-Converts rust back
into Steel 10.Liquid Steel-Concrete structural failure
remediation-11X stronger than steel-two layers incredible 123,000
PSI
- Slide 8
- Top 10 Pro-seal Products Pro-Seal DP-36 - single component
reactive osmotic reagent that seals, densifies, waterproofs,
hardens, reduces vapor drive and preserves most concrete substrates
when used as part of most all concrete work with any Pro- Seal
system. Densifies concrete 18- 22%. Applications On Grade Below
Grade Negative Side Vertical or Horizontal or over-head
applications Panama Canal
- Slide 9
- Top 10 Pro-seal Products PS34 -Single component sealant
material. Stops leaks and seals on contact even through water and
oil! Gunable from 38 F to 98 F and may be applied to surface
temperatures ranging from -70 F to +220 F. Applications Steel
Galvanized metal Kynar coated metal Plater Wood Aluminum Stone
Concrete Vinyl Boats Recreational Vehicles and more Alaska
Pipeline
- Slide 10
- Top 10 Pro-seal Products SP12 single component Polycarbon/
polycarbonate integrated technology one-coat penetrating breathable
sealer that completely seals most porous substrates, such as
grouting, brick-work, etc. Advantages Prevents moisture penetration
Will not alter color of substrate Retards pitting, rusting and
dusting Resists penetration of many oils, acids, eases and salts
U.V. Impervious Long lasting Water resistant seal No V.O.C. 7-10
year warranty available when applied by a certified applicator
Unsealed Sealed
- Slide 11
- Top 10 Pro-seal Products UltraShield-IIA Resistant to brackish
water High U.V. resistance Long term adhesion
- Slide 12
- Top 10 Pro-seal Products DG7 A.Apply DP36 to concrete B.Allow
to extract all oil, Hydraulic fluids & all other latent
contaminants 48-72 hours C.Apply DG7 to coagulate all contaminants
D.Rinse all residue with clean water and dispose A B C D
- Slide 13
- Top 10 Pro-seal Products Pro-Seal Power Patch TMPro-Seal Power
Patch TM Crumbling, deteriorating tunnel concrete ceiling that is
ready to cave in. Pro-Seal Power Patch TM filled the spalls and
sealed the rebar with a powerful compressive strength of 23,000
PSI.Pro-Seal Power Patch TM filled the spalls and sealed the rebar
with a powerful compressive strength of 23,000 PSI. Before
After
- Slide 14
- Top 10 Pro-seal Products Pro-Seal Aqua Crete TM single
component breathable elastomeric coating with exceptional
elongation and elasticity for decorative finishes over negative
side trowel coats. Applications Concrete CMU Block Stucco Areas of
greater expansion and contraction requiring a water barrier
- Slide 15
- Top 10 Pro-seal Products Pro-Seal Pro-Thane 230 TM is a single
component Polycarbon/ Polycarbonate caulking that is specifically
formulated to seal joints subject to structural movement against
water infiltration. This product may also be used on non-moving
joints and requires no job-site mixing. Applications Tilt-Up Panels
Cold Joints Plaza Decks Window Glazing Curtain Wall Panels Moving
Joints Non-moving Joints and more
- Slide 16
- Top 10 Pro-seal Products RC850 Rust converter Watch rust revert
back to steel before your eyes in seconds Kills rust, not just coat
it Eco-friendly Easy one-step application No V.O.C. Paintable or
seal with NanoSeal for permanent protection against re- oxidation
CLICK HERE TO SEE VIDEOHERE
- Slide 17
- Top 10 Pro-seal Products Liquid Steel Overhead bridgework
eroded and near to collapse. Using Powerpatch concrete repair
system and wrapped with 123,00 psi Liquid Steel, the structure was
saved and will last 80-100 years Before After
- Slide 18
- Support Intense two day work shop at ICP HQ in Seattle, WA, USA
Mingle with global attendees Learn about Polycarbon/Polycarbonate
quark-nano technologies Learn about innovative state-of-the-art
remediation techniques for concrete, glass, wood and steel Learn
about the new ECCO soil stabilization roadway system Discover all
our green attributes Hands-on full-scale model work-shops
Informative Q&A Forums One-on-one breakout meetings on personal
needs First phase of Contractor Authorization process Completion
Verification Certificate ICP University
- Slide 19
- ANATOMY OF A PROJECT Project Submittals to ICP/Proseal Detailed
Site Survey Form PhotoLink correlating photos ICP Technical Support
Team Generates Guide Specifications Guide Sketches Product Tech
Data Sheets Product MSDS Forms Other Support Docs Field Tech Orders
(when apropos) Warranty (when apropos) Technical Support
Support
- Slide 20
- Projects overseen by Proseal Certified Authorized Master
Technicians Provides Contractor O-J-T Authorization Certificate for
Specific Systems Required for warranty substantiation Provides
Contractor QA and peace-of- mind Provides Customer peace-of-mind
Field Project Manufacturers Tech Supprt
- Slide 21
- Thank you! For more information on Pro-seal or any of our
products or systems: info@ourWorld.ws PH: 011.949.521.8173 SKYPE:
jon.hawryliak