View
15
Download
0
Category
Preview:
Citation preview
Pilsa
PP-R and PP-RCT Pipe Systems
Hot and Cold Water Systems and Heating Applications
Product Guide
About Wavin Pilsa
Pilsa Plastic Products Inc. started production in 1971 and has always been a leader in the plastic sector in Turkey with a wide range of plastic pipe systems which are produced at the company’s manufacturing site in Adana.
In the beginning of January 2008 Pilsa Products Inc. has become a member of WAVIN Group which is located in Netherlands. Wavin is now a global leader in the supply of plastic pipe systems and solutions for both above and below ground applications in projects around the world. Since the 1950’s, we have built an unrivalled reputation for continuous innovation, intelligent problem-solving, dedicated technical support and the highest standards.
Today, as part of the Mexichem Group, around 5,500 Wavin employ-ees deliver the benefits of our technology and service for our custo-mers. We have sales and manufacturing operations in most European countries. Beyond Europe, we maintain an international network of approximately 120 agents, licensees and distributors with represen-tation all over the world.
Quality is number one concern of Pilsa and all products conform with the Turkish Standards and DIN Standards. Pilsa Products has received Certificates of Conformity also has ISO 9001 certificate besides TSE, TSEK, GOST-R.
Pilsa is well known throughout Turkey not only with its top quality pro-ducts, but also with the wide distribution system through the dealers’ network and service organization. Pilsa PP-R Pipes are manufactured in compliance with European / Turkish & German Standards (TS EN ISO 15874), DIN 8077, DIN 8078. Our products are approved and certified by GOST (Russia), Ukrania Standard (Ukrania), AENOR (Spain), DVGW (Germany) Bulgaria and have the certificates of guarantee obtained from the Turkish Standards Institute (TSE).
4 O
cak
2019
Pilsa
www.wavin.com.tr 3 Pilsa
PP-R and PP-RCT Product Guide
Extensive Product Range
Above Ground Product Groups:
PPR&PPRCT Pipes & Fittings + (PPR Pipes) and Composite PPR & PPRCT PipesPEX and Pert Pipes - Covered PEX and Pert Pipes and FittingsOXY PEX and Pert Pipes - Covered OXY PEX and Pert PipesWavin SiTech+ and SiTech B1 low noise systemsWavin Quickstream Rainwater Management SystemsU-PVC Soil and Waste System HepVO Waste Valve
Below Ground Product Groups:
HDPE Corrugated Pipes & FittingsU-PVC Pressure Pipes & FittingsPE Pipes (PE 32 - PE 100)Wavin PE Fittings (Electrofusion - Spigot)Wavin Plastic Manholes (Inspection Chambers) & Fittings Apollo O-PVC Pressure Pipes & Fittings
In our Turkey plant, we have Wavin Academy training center. It was established in 2014 in Adana in order to introduce our tech-nology and innovations to our customers in the shortest time and to provide the necessary solutions to the plastic pipe systems.
With help of Wavin Academy, which is the first in our sector, we traine the plumbers, technicians, installers, engineers, students, merchants and other solution partners in the sector.
4 Tel. +90 322 999 10 00 Pilsa
PP-R and PP-RCT Product Guide
Being one of the most powerful firms in the country in the plas-tics sector, PILSA gives the utmost importance to quality and:
Uses the most appropriate raw material,Has the most advanced high technology,Produces pipes in compliance with Turkish (TS), European (EN) and German(DIN) Standards,Pipes produced can be used not only to carry water but a wide range of fluids,Has qualified technical staff at your service to solve your problems,Our name stands for quality.
Why Pilsatherm Pipe?
Pilsatherm has got the following advantages:
Not dangerous to human life, non-toxic, non-cancerous,Low cost of transportation, loading and unloading,Has much longer service life compared to other piping systems,Has high resistance against corrosion,Can easily be connected to any kind of pipe. Due to low cost of plumbing, it has a wide range of applications,Water is one of the most important compounds contribu-ting to human life; PILSA. Pipes carry this vital fluid
to your households in an easy, healthy way at a low cost.
New Pilsa Plus PipesPilsa PLUS is a new product of Wavin Pilsa with improved characteristics. A pipe made of the raw material PP-RCT the new generation polypropylene designed for hot and cold water systems.
It is the better pipe with higher flow rate, improved pres-sure resistance and easier to handle.It has improved pressure resistance at higher temperatu-res for long term period.It has 37 % larger inner flow areaLarger inner bore and better flow ratesEasier to carry, install and handlePilsa Plus can be used with all standard Pilsa PP-R fittingsAvailable in different color options
Technical Properties Of Pilsatherm Pipes And Fittings
Raw material: Polypropylene Random Copolymer,Superior physical characteristics at 90°C,High chemical resistance,Definite solutions to calcification and corrosion,No bacteria and moss reproduction within the pipes,Light, easy to install and low labor cost of installation,Safe to use various pressurized liquids and gas, No reduction in diameter at welding points,Longer service life (50 years)Isolation is not necessary in the buildings,SDR 6 Pipes operation pressures: 30 bars at 20°C, 15 bars at 60°C, 10 bars at 70°C for a service life of 50 years.Operation temperature is between 70°C-90°C; it does not absorb water. It can easily be used in hot humid environment.Can be used in drinking water systems and has a quality cer-tificate issued by the Ministry of Health and Hygiene-Institute
New BasaltTherm Pipe
Basalt fiber is made by pulping melted basalt stones of suitable composition. It is very durable and flexible and used in many different industries.Properties of basalt fiber significantly exceed glass fiber.Manufacturing of basalt fiber is very ecological and 100% recyclable4-x lower linear thermal expansion,No need to shave before weldingHigher pressure resistance at higher temperatures by up to 50%Temperature resistance up to 90°C Higher flow rate by up to 20%
Pilsa
www.wavin.com.tr 5 Pilsa
PP-R and PP-RCT Product Guide
PHYSICAL AND MECHANICAL PROPERTIES OF RAW MATERIAL - PP-R
ISOTHERMAL MECHANICAL STRENGTH GRAPHIC FOR PP-R
Properties Testing Conditions Unit Testing Method Result
MRS Classification20°C, extrapolation 50 years
MPa ISO 9080 10
Density 23°C g/cm3 ISO 1183 0,89 - 0,91
Melting Flow Index MFI
190°C, 5 kgg/10dk g/10min
ISO 1133
0,4 - 0,6
230°C, 2,16 kg 0,2 - 0,5
230°C, 5 kg 0,8 - 1,3
Tensile Stress at Yield23°C, 50 mm/dk50 mm/min
MPa ISO 527 23 - 28
Tensile Strain at Yield23°C, 50 mm/dk50 mm/min
% ISO 527 min %10
Elasticity Modulus23°C, 1 mm/dk1 mm/min
MPa ISO 527 800 - 1000
Charpy Notched Impact Strength 0°C kJ/m2 ISO 179 >3,5
Thermal Conductivity - W/(m K) DIN 52612 0,24
Coefficient of Thermal Expansion (0°C/90°C)
- 1/K DIN 53752 1,5*10-4
Loop
Str
ess
, M
pa
Service Life, Hours
Y
50
40
30
20
10987
6
5
4
3
2
10,1 1 10 100 1 000 10 000 100 000 1 000 000 x1
x2
80 C
90 C95 C
10 C
20 C
30 C
40 C
50 C
60 C
70 C
110 C
1 5 10 25 50 100
PPR
6 Tel. +90 322 999 10 00 Pilsa
PP-R and PP-RCT Product Guide
PHYSICAL AND MECHANICAL PROPERTIES OF RAW MATERIAL - PP-RCT
ISOTHERMAL MECHANICAL STRENGTH GRAPHIC FOR PP-RCT
Y
50
40
30
20
10987
6
5
4
3
2
10,1 1 10 100 1 000 10 000 100 000 1 000 000 x1
x2
80 C
90 C95 C
10 C
20 C
30 C
40 C
50 C
60 C
70 C
110 C
1 5 10 25 50 100
PPRCT
Loop
Str
ess
, M
pa
Service Life, Hours
Properties Testing Conditions Unit Testing Method Result
MRS Classification20°C, extrapolation 50 years
MPa ISO 9080 11,2
CRS Classification70°C, extrapolation 50 years
MPa ISO 9080 5,3
Density 23°C g/cm3 ISO 1183 0,89 - 0,91
Melting Flow Index MFI
190°C, 5 kgg/10dk g/10min
ISO 1133
0,4 - 0,6
230°C, 2,16 kg 0,2 - 0,5
230°C, 5 kg 0,8 - 1,3
Tensile Stress at Yield23°C, 50 mm/dk50 mm/min
MPa ISO 527 23 - 28
Tensile Strain at Yield23°C, 50 mm/dk50 mm/min
% ISO 527 min %10
Elasticity Modulus23°C, 1 mm/dk1 mm/min
MPa ISO 179 800 - 900
Charpy Notched Impact Strength 0°C kJ/m2 ISO 179 9,5
Izod Notched Impact Strength 0°C kJ/m2 DIN 52612 17
Thermal Conductivity - W/(m K) DIN 52612 0,24
Coefficient of Thermal Expansion (0°C/90°C)
- 1/K DIN 53752 1,5*10-4
Pilsa
www.wavin.com.tr 7 Pilsa
PP-R and PP-RCT Product Guide
OPERATING PARAMETERS FOR PP-R & PP-RCT PIPES
PP-R Pipe Glass Fiber Reinforced PP-R Pipe
PP-RCT Pipe / Basalt Reinforced PP-RCT Pipe
Operating Pressure Operating Pressure
Temp°C
Life(year)
S 2,5SDR 6
S 3,2SDR 7,4
S 5SDR 11
S 3,2SDR 7,4
S 4SDR 9
S 5SDR 11
10
15102550100
35,133,032,231,130,329,6
27,826,225,624,724,123,5
17,516,516,115,615,214,8
30,229,328,928,428,027,6
24,023,222,922,522,221,9
19,018,418,217,917,7 17,4
20
15102550100
29,928,127,426,425,725,0
23,722,321,721,020,419,9
15,014,113,713,212,912,5
26,325,425,124,624,324,0
20,920,219,919,619,319,0
16,616,015,815,515,315,1
30
15102550100
25,423,823,222,321,721,1
20,218,918,417,717,216,8
12,711,911,611,210,910,6
22,722,021,721,220,920,6
18,117,417,216,916,616,4
14,313,913,613,413,213,0
40
15102550100
21,620,219,618,818,317,8
17,116,015,515,014,514,1
10,810,19,89,49,28,9
19,618,918,618,217,917,6
15,515,014,714,414,214,0
12,311,911,711,511,311,1
50
15102550100
18,217,016,515,915,414,9
14,513,513,112,612,211,8
9,18,58,27,97,77,5
16,716,415,815,515,215,0
13,312,812,612,312,111,9
10,510,110,09,79,69,4
60
15102550
15,414,313,913,312,9
12,211,311,010,510,2
7,77,16,96,66,4
14,213,613,413,112,8
11,210,810,610,410,2
8,98,68,48,28,1
70
15102550
12,912,011,610,08,5
10,39,59,28,06,7
6,56,05,85,04,2
11,911,411,210,910,7
9,49,18,98,78,5
7,57,27,06,96,8
80
151025
10,89,68,16,5
8,67,66,45,1
5,44,84,03,2
9,99,59,39,1
7,97,57,47,2
6,26,05,95,7
957,65,24,3
1510
6,14,1(3,4)
3,82,6(2,2)
7,47,1(6,9)
5,95,6(5,5)
4,74,4(4,3)
*Safety Factor (C): 1,5
8 Tel. +90 322 999 10 00 Pilsa
PP-R and PP-RCT Product Guide
2025324050637590110125160200
D(mm)
3.4 4.2 5.4 6.7 8.3
10.5 12.5 15.0 18.3 20.8 26.6 33.2
t (mm) (20 Bar)
2,83,54,45,56,98,6
10,312,315,117,121,927,4
t (mm) (16 Bar)
1.9 2.3 2.9 3.7 4.6 5.8 6.8 8.2
10.0 11.4 14.6 18.2
t (mm) (10 Bar)
s 5SDR 11PN 10
s 3,2SDR 7,4PN 16
s 2,5SDR 6PN 20
252010553221111
Bundle
GlassFiber Reinforced PP-R Pipe (4mt)
PilsaTherm Pipe (4mt)
2025324050637590110125
3.4 4.2 5.4 6.7 8.3
10.5 12.5 15.0 18.3 20.8
D(mm)
t (mm) (25 Bar)
3052111305211430521163052118305211930521203052121305212230521233052124
s 2,5SDR 6PN 25
2520105532211
Bundle
Pipes and fittings
Pilsa Plus Pipe (4mt)
2025324050637590110125
3065552306555330655543065555306555630655573065558306555930655603065561
2520105532211
s 4SDR 9PN 22
D(mm)
t (mm) Bundle
2,32,83,64,55,67,18,4
10,112,314
3040240 3050623 30506303040241 3050638 30506443040242 3050652 30506583040243 3050666 30506703040244 3050676 3050680- 3050686 30506903040246 3050695 30506993040247 - 30402693040248 3050712 3040270- 3050721 30402713050724 - 3050725- - 3050726
- upon request
Pilsa
www.wavin.com.tr 9 Pilsa
PP-R and PP-RCT Product Guide
Basalt Reinforced PP-RCT Pipe (4mt)
D(mm)
2.8 3.5 4.4 5.5 6.9 8.6 8.4
10.1 12.3 14.0
t (mm) Bundle
2025324050637590110125
2520105532211
s 3,2SDR 7,4PN 25
s 4SDR 9PN 22
Socket
DN Sap Code
2025324050637590110125
3040349304035030403513040352304035330403543040355304035630403573040358
Box d (mm)
d(mm)
L1(min.)(mm)
L1(min.)(mm)
D(mm)
D(mm)
A(mm)
L(mm)
k(mm)
6004002401201004830241010
Bag
504020151066111
3052409 3052410 3052411 3052412 3052413 30524143052415 3052416 3052417 3052418
Elbow (90º)
3040127304012830401293040130304013130401323040133304013430401353040136
DN Sap Code
45030015080402515844
Box
50502510553111
Bag
2025324050637590110125
19,50 14,50 28 33 424,50 16,00 34 37 431,50 18,00 42,5 41 439,40 20,50 53 46 4,549,40 23,50 66 52 4,562,50 27,50 83 60 4,574,70 30,00 100 65 589,20 33,00 120 71,5 6109,00 37,00 146 80 6124,60 40,00 167 86 6
19,5 14,5 28 25,524,5 16 33 29,531,5 18 43,5 3539,4 20,5 53 41,549,4 23,5 67 5062,5 27,5 83,5 6074,7 30 100 6889,2 33 120 78,5109 37 147 92,5124,6 40 168 102
10 Tel. +90 322 999 10 00 Pilsa
PP-R and PP-RCT Product Guide
Pipes and fittings
Elbow Long
4049357
DN Sap Code
150 75
Box
25
Bag
25x1/2
Elbow (Female-Male) 90º
DN
202525/20
304013730401383040139
Sap Code
500300300
Box
503030
Bag
Elbow (45º)
3040119304012030401213040122304012330401243040125
DN
400250120100482418
Box d (mm)
d1(mm)
d1(mm)
L1(min.)(mm)
L1(min.)(mm)
L1(min.)(mm)
D(mm)
d2(mm)
d2(mm)
L2(min.)(mm)
L2(min.)
A(mm)
D(mm)
D
A(mm)
A
50502010843
Bag
20253240506375
Sap Code
Elbow with Reducer
3051268
DN Sap Code
300
Box
30
Bag
25-20
19,5 14,5 26,5 2024,5 16 33,5 2231,5 18 43,5 3239,4 20,5 52,5 3149,4 23,5 68 3562,5 27,5 84 42,574,7 30 100 47
19,5 14,5 20 15 28,5 2524,5 16 25 15,5 33,5 29,524,5 16 20 15,5 33 29,5
19,5 14,5 25 16 33
24,5 16 35 42 32
d1 L1(min.)(mm)
D1(mm)
D2(mm)
A1(mm)
A2(mm)
G(mm)
1/2"
29,5
Pilsa
www.wavin.com.tr 11 Pilsa
PP-R and PP-RCT Product Guide
Bend
3051238-
DN
300180
Box
3020
Bag
2025
Sap Code
Tee
DN
2025324050637590110125
3040177304017830401793040180304018130401823040183304018430401853040186
2401509050321812643
Box
3025155432111
BagSap Code
Sap Code
Cross Tee
30401093040110304011130401123040113
DN
200150905024
Box
25151053
Bag
2025324050
Manchon Union PN 10
DN
2025324050
30403893040390304039130403923040393
Box d(mm)
L(mm)
180120604032
Bag
1510554
Sap Code
19,5 14,5 28 50,5 7024,5 16 35 63,5 88
d1(mm)
L1(min.)(mm)
D(mm)
L2(min.)(mm)
L(mm)
19,5 14,5 27 51,5 2624,5 16 33 63 3031,5 18 43 72 3639,4 20,5 53 85 43,549,4 23,5 66,5 100 5062,5 27,5 84,5 119,5 6074,7 30 100 130 7389,2 33 120 158 79109 37 146 186 93124,6 40 167 208 103,5
d(mm)
d(mm)
L1(min.) (mm)
D (mm)
L (mm)
L2 (mm)
L1(min.) (mm)
D(mm)
L(mm)
A(mm)
19,5 14,5 26,5 51 5124,5 16 33 60 6031,5 18 42,5 70 7039,4 20,5 53 84 8449,4 23,5 66,5 103,5 103,5
19,5 4124,5 5131,5 6339,4 7149,4 74
- upon request
12 Tel. +90 322 999 10 00 Pilsa
PP-R and PP-RCT Product Guide
Unequal Tee
30402743040275304027730402763040279304028230402783040283304028130402803040284304028530402863040287304028830402933051242304029430402963040297304029530402893040290304029830402913040299304030030403013040302304030330403043040305304030630403073040308304030930403103040311
D1 D2 D3 Sap Code
150150150150909090909090325050503250323232323232323232202020202012121212121284
Box
19,524,524,524,531,531,531,531,531,531,531,539,439,439,439,449,449,449,449,449,449,449,449,449,449,462,562,562,562,562,574,774,774,774,774,774,789,2109
14,516161818181818181818
20,520,520,520,523,523,523,523,523,523,523,523,523,523,527,527,527,527,527,53030303030303337
333533
33,542,543
42,542,54343655353536666
66,566,566656566
65,566,566,5848484
83,583,5100100100100100100120146
24,519,519,524,519,519,519,524,524,524,549,419,524,531,549,431,539,431,539,431,539,449,449,419,524,519,524,531,539,449,419,524,531,539,449,462,574,789,2
1614,514,516
14,514,514,5161616
23,514,51618
23,518
20,518
20,518
20,523,523,514,516
14,51618
20,523,514,51618
20,523,527,53033
33,528
26,533,542,542,527
42,5433465333343
65,565,566
65,565,5515266653333
26,533
42,5536633335353
83,583,5120146
19,519,524,519,519,524,531,519,524,531,531,539,439,439,439,439,431,531,539,449,449,431,539,449,449,462,562,562,562,562,574,774,774,774,774,774,789,2109
14,514,516
14,514,51618
14,5161818
20,520,520,520,520,51818
20,523,523,518
20,523,523,527,527,527,527,527,53030303030303337
332833
33,542,543
42,542,54343655353536666
66,566,566656566
65,566,566,5848484
83,583,5100100100100100100120146
65535565
73,573,560
73,56610365,57070801031031031031049090
103,5103,5
8585808591101112130130130130130130158186
d1 L1(min.)(mm)
(mm)
(mm) (mm)(mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm)D1 d2 L2(min) D2 d3 L3(min) D3 L
d1 L1 (min.)(mm)
d2(mm)
L2 (min)(mm)
D1(mm)
D2(mm)
L(mm)
37,527,528,535,540,540,531,5404035
54,538,538,541
54,554,555,555,555,549,549,555
54,5444452525254576060606068687993
A
252525251515151515154555454444444442222211111111
Bag
20/25/2025/20/2025/20/2525/25/2032/20/2032/20/2532/20/3232/25/2032/25/2532/25/3232/50/3240/20/4040/25/4040/32/4040/50/4050/20/5050/25/5050/32/3250/32/4050/32/5050/40/3250/40/4050/40/5050/50/3250/50/4063/20/6363/25/6363/32/6363/40/6363/50/6375/20/7575/25/7575/32/7575/40/7575/50/7575/63/7590/75/90110/90/110
Pipes and fittings
25/2032/2032/25
304031230512463040313
Female-Female Reducer
DN Box
300250250
Bag
302525
Sap Code
24,5 16 19,5 14,5 35 32,5 3931,5 18 19,5 14,5 43 41 48,531,5 18 24,5 16 43 41 48,5
Pilsa
www.wavin.com.tr 13 Pilsa
PP-R and PP-RCT Product Guide
Flange Adaptor
3040196304019730401983040199304020030402013040202
DN
2501508036362012
Box
2515104421
Bag
4050637590110125
Sap Code
39,449,462,574,789,2109
124,6
20,523,527,530333740
50,561,577
90,5109132164
6273,590,5106
124,5150,5185
2427
31,538
42,55062
8,58,5816182120
d L1(min.) D1 D2 L k
3040315304031730403163040318304031930403203040321304032230403233040324304032530403263040327304032830403293040330304033130403323040333304033430403353040336
DN
56030030024024020020020015012012012080605040362418181813
Box
4030303030202025151010105555421111
Bag d1 L1(min) d2 L2(min.) D L
25/2032/2032/2540/2040/2540/3250/2050/2550/3250/4063/2563/3263/4063/5075/5075/6390/6390/75110/63110/75110/90125/110
Female-Male Reducer
Sap Code
19,519,524,519,524,531,519,524,531,539,424,531,539,449,449,462,562,574,762,574,789,2109
14,514,516
14,51618
14,51618
20,51618
20,523,523,527,527,530
27,53033
37w
253232404040505050506363636375759090
110110110125
1813,515,525
24,527,523,523,523,524,528
28,5282831262833
32,532,532,537
293535
30,535,542,52934
42,553,534,543,56367
75,584,59198
111111119147
3939
39,547,5484748
49,547,548
56,557,55353
61,567
76,581,588
91,593,5102
Saddle
30403373040338304033930403403040341304034230403433040344
DN
600600600600600600600600
Box
5050505050505050
Bag
63/2063/2575/2075/2590/2090/25110/20110/25
Sap Code d0 d1 d2 D1 D2 kL1(min.)
63 19,5 14,5 17 28,5 37 675 19,5 14,5 17 28,5 37 690 19,5 14,5 17 28,5 37 6110 19,5 14,5 17 28,5 37 663 24,5 16 19 33,5 37,5 675 24,5 16 19 33,5 37,5 690 24,5 16 19 33,5 37,5 6110 24,5 16 19 33,5 37,5 6
(mm)
(mm)
(mm) (mm) (mm) (mm) (mm) (mm) (mm)
(mm)
(mm)
(mm)
(mm) (mm) (mm) (mm)
(mm) (mm) (mm)
14 Tel. +90 322 999 10 00 Pilsa
PP-R and PP-RCT Product Guide
19,5 14,5 28 16024,5 16 32,5 20319,5 14,5 28 16524,5 16 32,5 212
Pipes and fittings
Crossover Bridge
Short Bridge
DN
2025
40478324047833
240150
Box
3025
BagSap Code
Tee w/ V Type Bridge
Omega
DN
DN
20/20/2025/25/2525/20/2532/25/32
20253240
3075009307501030750113075012
3040105304010630401073040108
1001005050
251584
Box
Box d
Ad
101055
5311
Bag
Bag
Sap Code
Sap Code
DN
202532
305124430512454056717
Sap Code
15010056
Box
15104
Bag
Bridge
DN
20253240
3040115304011630401173040118
135904527
Box
151053
BagSap Code
Clips
30402323040233304023430402353040236
DN
1200960500320200
Box
10080504025
Bag
2025324050
Sap Code
19,5 14,5 28 23 9024,5 16 33,5 31 96
d
d1
L1(min.)
L1(min.)
D
D1 D2
A L
L
19,5 14,5 28,5 160 3324,5 16 33 194 4031,5 18 46 216 49
d1
d L
L1(min.) D L A
20 4525 5532 6940 85
19,5 14,5 28 16024,5 16 32,5 20319,5 14,5 28 16524,5 16 32,5 212
20253240
20,5 1925,5 2232,5 2540,5 2948,5 44
(mm)
(mm)
(mm)
(mm)
(mm)
(mm) (mm)
(mm) (mm) (mm) (mm)
(mm) (mm) (mm) (mm)
(mm)
(mm) (mm) (mm) (mm)
20252025
Pilsa
www.wavin.com.tr 15 Pilsa
PP-R and PP-RCT Product Guide
End Cap
DN
2025324050637590110
304016730401683040169304017030401713040172304017330401743040175
1008050251010642
Sap Code
80064040020010080483216
BoxBag
Male Threaded End Cap
DN
20x1/225x3/432x1
304020530402063040207
1000640400
Box
1008050
BagSap Code
Female Threaded Adaptor
20x1/220x3/425x1/225x3/432x3/432x1
DN
304002430400253040026304002730400283040049
Sap Code
320240250280120120
Box
202025201010
Bag
Female Threaded Adaptor (Hexagonal Shaped)
DN
40x1 1/450x1 1/263x275x2 1/290x3110x4
304005030400513040052304005330400543040055
4024141254
Box
1042211
BagSap Code
Double Clips
304023730402383040239
DN
500320200
Box
504025
Bag
202532
Sap Code
20 38 17,525 44,5 19,532 53,5 25
d A1 A2
d D L
L1 L G
19,5 28,5 25,524,5 34,5 2931,5 43 3239,4 53,5 37,549,4 67 43,562,5 85 5274,7 100,5 5889,2 121 64109 146,5 71,5
11 34 1/2"11 31 3/4"20 40 1"
19,5 14,5 28,5 38,5 24 40,5 1/2''19,5 14,5 29 42,5 24 40 3/4''24,5 16 33,5 38 24 40,5 1/2''24,5 16 33 42,5 24 40,5 3/4''31,5 18 43 45,5 24,5 44 3/4''31,5 18 43 53 28 47,5 1''
d1 D1 D2 L2
d1 D1 L2 L3
L1 (min)
L1(min)
L G
L G
39,4 20,5 54 25,5 47 61 1-1/4''49,4 23,5 68 29 53,5 67,5 1-1/2''62,5 27,5 84 28,5 55 73 2''74,7 30 100 30 59,5 78 2-1/2''89,2 33 120,5 44 75,5 92 3''109 37 147 48 84 102 4''
(mm)
(mm)
(mm)
(mm)
(mm) (mm) (mm) (mm) (mm) (mm) (mm)
(mm) (mm) (mm) (mm) (mm)(mm)
(mm) (mm)
(mm)
(mm) (mm)
(mm)
16 Tel. +90 322 999 10 00 Pilsa
PP-R and PP-RCT Product Guide
Pipes and fittings
Male Threaded Adaptor
304006230400633040064304006530400663040067
DN
250200240150100100
Box d1
d1
L1(min)
L1(min)
D1
D1 L2 L3 L G
D2 L L2 L3 G
d1
d1
d1
L1(min)
L1(min)
L1(min)
D1
D1
D1
D2
D2
D2
A
A1
A1
L
A2
A2
G
L G
G
252015151010
Bag
20x1/220x3/425x1/225x3/432x3/432x1
Sap Code
Male Threaded Tee
DN
20x1/2x2020x3/425x1/2x2525x3/4x2532x1
30402083040209304021030402113040212
15013010010060
Box
1510101010
BagSap Code
Female Threaded Tee
Sap CodeDN
20x1/2x2020x3/425x1/2x2525x3/4x2532x1
30401873040188304018930401903040191
20014012012070
Box
2520201510
Bag
Female Threaded Elbow
DN
20x1/220x3/425x1/225x3/432x3/432x1
304014230401433040144304014530401463041449
250280160180100100
Box
252020151010
BagSap Code
Male Threaded Adaptor (Hexagonal Shaped)
DN
40x1 1/4”50x1 1/2”63x2”75x2 1/2”90x3”110x4”
304006830400693040070304007130400723040073
Sap Code
251610653
Box
521111
Bag
19,5 14,5 28,5 35 53 24 40 1/2''19,5 14,5 29 42,5 53 23,5 40 3/4''24,5 16 34 39 53 23,5 40 1/2''24,5 16 33 42 53 24 40 3/4''31,5 18 43 45 57 24,5 44 3/4''31,5 18 43 52,5 62,5 28 47 1''
19,5 14,5 27 38,5 35 51,5 1/2''19,5 14,5 28,5 43 36 60,5 3/4''24,5 16 33 38 37 60 1/2''24,5 16 35 43 37,5 60 3/4''31,5 16 43 53,5 43 70 1''
19,5 14,5 27 38,5 35 47,5 51,5 1/2''19,5 14,5 28,5 43 36,5 49,5 60,5 3/4''24,5 16 33 38 37 50,5 60 1/2''24,5 16 35 43 37,5 50,5 60 3/4''31,5 16 43 53,5 43 58 70 1''
19,5 14,5 28,5 38,5 31,5 36 1/2''19,5 14,5 29 40 31 35,5 3/4''24,5 16 33,5 38,5 32 38 1/2''24,5 16 33,5 43 32 40 3/4''31,5 18 44 57,5 34 45 3/4"31,5 18 43,5 54 34 45 1"
39,4 20,5 54 25 47 81 1-1/4''49,4 23,5 68 29 53,5 87,5 1-1/2''62,5 27,5 84 28,5 55 98 2''74,7 30 100 30 59,5 105 2-1/2''89,2 33 120,5 43,5 76 118 3''109 37 147 48 84,5 129,5 4''
(mm)
(mm)
(mm)
(mm)
(mm) (mm) (mm) (mm) (mm) (mm)(mm)
(mm) (mm) (mm) (mm) (mm) (mm) (mm)
(mm)
(mm) (mm) (mm) (mm) (mm) (mm)
(mm) (mm) (mm) (mm) (mm)
(mm) (mm) (mm) (mm) (mm) (mm) (mm)
Pilsa
www.wavin.com.tr 17 Pilsa
PP-R and PP-RCT Product Guide
Male Threaded Elbow
DN
20x1/220x3/425x1/225x3/432x3/432x1
304015430401553040156304015730512393040158
2001801401608080
Box
251010201010
BagSap Code
Adjustable Underplaster Female Elbow
DN
20x1/225x1/2
30400814064856
Sap Code
3636
Box
33
Bag
Sap Code
Double Stable Underplaster Female Elbow
DN
20x1/225x1/2
40478384047839
6060
Box
5 5
Bag
Underplaster Female Elbow
DN
20 25
30403843040385
200 180
Box
20 15
BagSap Code
Underplaster Male Elbow
DN
20 25
30403873040388
180180
Box
1510
BagSap Code
19,5 14,5 28 38,5 31 35 1/2"24,5 16 33 38,5 31,5 36 1/2"
d1
d1
D1
D1
D2
D2
A1
A1
A2
A2
G
A3 G
L1(min)
L1(min)
d1
d1
D1
D1
A1
A1
A2
A2
A3 L H G
G
L1(min)
L1(min)
19,5 14,5 28 38,5 31 35 48 1/2"24,5 16 33 38,5 31 36 49 1/2"
19,5 14,5 28,5 38,5 31,5 36 49 1/2''19,5 14,5 29 40 31 36 48 3/4''24,5 16 33,5 38,5 32 38 51 1/2''24,5 16 33,5 43 32 40 53 3/4''31,5 18 43,5 57,5 34,5 45 58 3/4"31,5 18 43,5 54 34,5 45 62 1"
d1 L1(min) D1 D2 A1 A2 A3 G
19,5 14,5 33 37 113 150 224 38 1/2"24,5 16,5 33 37 113 150 224 38 1/2"
19,5 14,5 34 32 150 1/2"24,5 16 34 32 150 1/2"
(mm)
(mm)
(mm)
(mm)
(mm) (mm)
(mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm)
(mm) (mm) (mm) (mm) (mm)
(mm) (mm) (mm) (mm) (mm) (mm)
(mm) (mm) (mm) (mm) (mm) (mm) (mm)
18 Tel. +90 322 999 10 00 Pilsa
PP-R and PP-RCT Product Guide
DN
20253240506375
3040094304009530400963070085307008630700873070088
1201208048281512
Box
5554211
BagSap Code
Chrome Valve
Valve Round Cap
DN
DN
202532
202532
307215930401023040103
307216530527483052749
Sap Code
Sap Code
606050
Box
606050
Box
111
Bag
111
Bag
Valve
DN
20253240
3078894307889730789203040292
70704230
Box
5533
BagSap Code
20253240506375
3040094304009530400963070085307008630700873070088
1201208048281512
5554211
Ball Valve
20x1/2
Bide Nozzle Part Female
DN
3051266
Sap Code
60
Box
10
Bag
27 28,5 90 32 136 1/2"
d1
D1
D1
A1
D
A2
A
A3
L
L G
G
14,5
L1(min)
L1(min)
L1(min) A k L
19,5 14,5 28 38 26 72 1/2"24,5 16 33 42 30 77 3/4"31,5 18 42,5 53 39 80 1"39,4 20,5 54 64 43 111 1-1/4"
19,5 14,5 28,5 26,5 72 3/4"24,5 16 33,5 30 77 3/4"31,5 18 42,5 39 80 1"
d1
d1 D1 A L G
D1 A L GL1(min)
L1(min)
19,5 14,5 28,5 26,5 72 3/4"24,5 16 33,5 30 77 374"31,5 18 43 38,5 80,5 1"
39,4 20,5 71 119 8949,4 23,5 78 119 1262,5 27,5 90 157 12874,7 30 100 157 148
19,5 14,5 50 56 6824,5 16 50 56 6831,5 18 54 56 75
d(mm)
19,5
d1 (mm)
(mm)
(mm)
(mm)
(mm) (mm) (mm) (mm) (mm) (mm)
(mm) (mm) (mm) (mm) (mm)
(mm) (mm) (mm)
(mm) (mm) (mm) (mm) (mm) (mm)
(mm) (mm) (mm) (mm) (mm) (mm) (mm)
Pipes and fittings
Pilsa
www.wavin.com.tr 19 Pilsa
PP-R and PP-RCT Product Guide
Metal Female Threaded Union (Hexagonal Shaped)
DN Box d
d
Bag L1(min.)
L1(min.)
G
G
Sap Code
20x1/2”25x3/4”32x1”40x1 1/4” - PN1050x1 1/2” - PN1063x2”
304021730402183040220304022130402223040223
1208060242418
10105222
Metal Male Threaded Union (Hexagonal Shaped)
DN
20x1/2”25x3/4”32x1”40x1 1/4” - PN1050x1 1/2” - PN1063x2”
304022430402253040227304022830402293040230
Sap Code
1208050242016
Box
10105222
Bag
Decorative Valve
DN
202532
307216230512543051255
Sap Code
606050
Box
11 1
Bag
Radiator Valve Straight
Sap CodeDN
20 4047847 80
Box
5
Bag
Radiator Valve Elbow
DN
20 4047846 80
Box
5
BagSap Code
19,5 14,5 1/2''24,5 16 3/4''31,5 18 3/4''39,4 20,5 1-1/4''49,4 23,5 1-1/2''62,5 27,5 2''
19,5 14,5 1/2''24,5 16 3/4''31,5 18 3/4''31,5 18 1''39,4 20,5 1-1/4''49,4 23,5 1-1/2''62,5 27,5 2''
19,5 14,5 28,5 26,5 72 3/4"24,5 16 33,5 30 77 3/4"31,5 18 42,5 39 80 1"
d1
d1
d1
D1
D
D A1
L2
L2
L3
L3
G
G
A L GL1(min)
L1(min)
L1(min)
19,5 14,5 30 66 68 3/4"
19,5 14,5 30 34,5 60 85 3/4"
(mm)
(mm)
(mm)
(mm)
(mm) (mm) (mm)(mm) (mm) (mm)
(mm) (mm) (mm) (mm)(mm)
(mm) (mm) (mm) (mm) (mm) (mm)
(mm) (mm)
(mm) (mm)
20 Tel. +90 322 999 10 00 Pilsa
PP-R and PP-RCT Product Guide
Pipes and fittings
Male Filter
DN
30512033051204
200120
Box
20 10
Bag
20x1/225x3/4
Sap Codes
Welding Machine Set
DN
16-4050-110
30332363040363
51
Sap Code Box
Shifting Union with Metal Transition
DN
20x1/220x3/425x1/225x3/425x1
40478254047826404782740478284065369
Sap Code
300250250250200
Box
3025252520
Bag
Welding Head
DN
2025324050637590110125
3033427303342830334293033430303343130334323033433303343430334353033436
50505050503030302010
Sap Code Box
Cutter
DN
30330424047816
Sap Code
3020
Box
20-25-3240-63
Shifting Elbow with Metal Transition
DN
20x1/225x3/4
30400073040009
Sap Code
300250
Box d1
(mm)
(mm)
d1
(mm)d1
L1(min)(mm)
L1 (min)(mm)
L1 (min)(mm)
D1(mm)
L(mm)
G(mm)
D1(mm)
D(mm)
D2(mm)
L(mm)
G(mm)
A1(mm)
A2(mm)
G(mm)
3025
Bag
19,5 14,5 28,5 30 45 1/2" 24,5 16 33,5 33 53 3/4"
19,5 14,5 28,5 57 1/2''19,5 14,5 29 59 3/4''24,5 16 33,5 59 1/2"24,5 16 33 59 3/4"24,5 16 42,5 72 1"
19,5 14,5 30 41 80 1/2"24,5 16 35 46 101,5 3/4"
Pilsa
www.wavin.com.tr 21 Pilsa
PP-R and PP-RCT Product Guide
CONNECT TO BETTERPE-RT Pipe with Oxygen Barrier
the most flexible heating system
The term PE-RT pipe is short for heat-resistant PE pipe. (PE Raised Temperature)
Wavin uses new generation Type 2 PE-RT with raised pressure strength as a raw material in its manufacturing.
The raw PE-RT ensures long-term hydrostatic strength at high temperatures without any of the crosslinking observed in Pex pipes.
As it does not contain any chemical additive resulting in crosslinking, it is suitable for use with potable water and does not pose any threat to human health.
Packaged in a coil Wavin PE-RT pipes have a very flexible structure and can be installed relatively easily.
EVOH Layer: Special layerpreventing the permeability of oxygen
Internal layer: PE-RT layer resistant to high temperature and pressure
1
2
Thanks to their special formulated layer, Wavin Oxy PE-RT pipes protect metal components installed in the system such as pumps, valves and radiators against corrosion by preventing the permeability of oxygen at a level close to 100%. Thus, the life of the system components is extended, while repair and maintenance costs are minimized.
19,5 14,5 28,5 30 45 1/2" 24,5 16 33,5 33 53 3/4"
22 Tel. +90 322 999 10 00 Pilsa
PP-R and PP-RCT Product Guide
Our Certificates
Pilsa
www.wavin.com.tr 23 Pilsa
PP-R and PP-RCT Product Guide
Notes
Water management | Heating and cooling | Water and gas distributionWaste water drainage | Datacom
Wavin TR Plastik Sanayi A.Ş. | Güzelevler Mah.Girne Bulvarı No: 294/A Yüreğir / Adana | Web www.wavin.com.tr | E-mail wavin.tr.info@wavin.com
Wavin operates a programme of continuous product development, and therefore reserves the right to modify or amend the specification of their products without notice. All information in this publication is given in good faith, and believed to be correct at the time of going to press. However, no responsibility can be accepted for any errors, omissions or incorrect assumptions. Users should satisfy themselves that products are suitable for the purpose and application intended.
© 2016 WavinWavin reserves the right to make alterations without prior notice. Due to continuous product development, changes in technical spefications may change. Installation must comply with the installation instructions.
Pilsa
Recommended