View
320
Download
30
Category
Tags:
Preview:
Citation preview
PT. FRATA BAYUTAMA PRIMAIndustrial Cleaning, Chemical, Maintenance, Sparepart & Painting Coating
COMPANY PROFILE
CONTENT
COMPANY OVERVIEW
VISION, MISSION AND BELIEVE
OUR VALUE IS CUSTOMER SATISFACTION
SERVICES WE PROVIDE
VISION, MISION, BELIEVE
PRODUCTS & CLEANING MAINTENANCE
CHEMICAL PRODUCT AND MAINTENANCE
INDUSTRIAL CHEMICAL CLEANING
OPERATIONAL CHEMICAL CLEANING
PAINTING AND COATING
LIST EQUIPMENT
OUR SERVICE IN INDUSTRIAL MAINTENANCE
CUSTOMERLIST
WORKING REFERENCE
CONTACT US
COMPANY OVERVIEW
PT. Frata Bayutama Prima began its legalcy in 2007 by marketing a full line of Xcel Building and Industrial Cleansing as well as Refractories, Insulation, Maintenance Chemicals Covering Chemicals for Cleaning,Water Treatment, Waste Water Treatment, Fuel Oil Treatment, and other speciality chemical.
Excellent product quality and strong client commitment has allowed the company to prosper and to increase its range of products and services. The company has also expended into Maintenance and Engineering Services, fortified by its technology, unique methodology, modern tools, equipment and accessories. All of these are being facilitated by our dedicated professional whorkshop Futhermore.
PT. Frata Bayutama Prima department currently has a workshop and several departments of office building, workshop and wharehouse. The warehouse hold extensive inventory while the workshop hold the engineering services which allow easy communication between the sales representatives and the technical engineer in providing efficient customer service.
after the cleaning of the facilities, Xcel with the modern and cutting edge technology in prevent ion and maintenance methodology also provide other products and services to complement the cleaned facilities. These include Fuel Oil Treatment Management Program.
We invite you to examine this company profile carefully and consider the advantages of a modernization cleaning program that will result in an increase of a process efficiency and a higher profitability.
PT. Frata Bayutama Prima is in a unique position to help the client to increase profitability by improving the efficiency of the facilities with minimum cost involved.
The Xcel Modernization Cleaning program is both innovative and far reaching. It Combines chemical and mechanical cleaning methods to increase the efficiency of the facilities such as fin fan cooler, convection section, heat exchanger, boiler other. Similarly, the company also focusing at the safety advantages of the workers, metals and environment.
The objective is quite simple if the facilities are already cleaned from scale, carbon or any deposits, the facilities will run smoothly. The end result is the increase in production efficiency that translates into higher profitability.
OUR VALUE IS CUSTOMER SATISFACTION
Market oriented and guaranteed product availability. Safety advantages chemical products focusing on the safety of the
metals and safety of the environment. Comprehensive back up support facilities and competently trained
service engineers. Product quality consistency Modern tools, equipment and accessories. 24 hours emergency call during the project and trouble shooting on
emergency case Exclusive workshop support. Use of a flexible system of chemicals treatment resulting in greater
effectiveness Thorough analysis of existing problems Risk-based, cost-effective, practical solutions. Hands-on experience and management tools to get the job done
correctly, on time and whiting budget. Careful planning to prevent future problems Safety planning and compliance Satisfaction guarantee in achieving the scope of work and the
acceptance of approval. Evaluation and Documentation of the projects.
SERVICE WE PROVIDE
To conduct a global business directed toward one stop solution in chemical preventative and maintenance as well as
engineering services through innovation, safe, compliant and cost-effective manner.
MISSION BELIEVE
VISION
PT. Frata Bayutama Prima is committed to be the vendor of choice for our building and industrial clients continually supplying chemical product and services that meet clients need for profitability improvement.
We Willaccomplish this trough open communication and measurable performance objectives while being fiercely focused on cost. We also place paramount importance in providing Client Services Quality which translates to understanding client's needs and in delivering the level of quality to meet those needs and expectation.
As our believe in a cleaner greener and better tomorrow, Xcel manufacture environmentally friendly and biodegradable products.In line with our core value, product quality and client's commitment, Arvichem chemical has been proven in value adding technology that has enhanced its custumores existing product lines, bringing to fruition a muttualy profitable business that endeavors its reputation as “ Trust us with chemical and engineering services “
Since we believe that our customers are also our partner in chemical innovation, PT. Frata Bayutama Prima serves its customers with Xcel speciality products.
CHEMICAL PRODUCT AND MAINTENANCE Building and Industrial Chemical Watertreatment Product -Multy Function Boiler Treatment(anti scale & anti corrosion -Corrosion Inhibitor -Oxigent Scavenger -Multy Function Cooling Tower Treatment -Algacide Treatment -Algacide Oxidizing Biocide -Closed Loop System (Chiller Treatment) Waste Watertreatment -Coagulation -Floculation -Oxidizing Additive
Building and Industrial Maintenance Scale Remover Inhibite Acid & Scale Remover Silica Remover Hard Scale Remover (For Digester) Organic Remover (For Difuser) Green Liquor Scale Remover (For Green Liquor Main Pipe) Carbon Remover Rust Remover Rust Converter Passivating Agent Cutting Oil Radiator Coolant Flush and Slude Dispersant Fin Coil Cleaner (Acid Base) Fin Coil Cleaner (Alkaline Base) Degreaser (Water Base) Super Degreaser (Solvent Base) Pickling Stainless Steel Aluminium Cleaner Paint Remover Penetrating Oil Anti Foam Neutralizer
CHEMICAL FOR Oil and Gas FieldDRILLING APPLICATIONS -Antiifoam)Defoamer -Biocide -Corrosion Inhibitor -Emulsifier -Foamer -Cleaner (including Rig Wash) -Scale Inhibitor
PRODUCTION OF OIL & Gas -Demulsifier -Antifoaming Agent -Scale Inhibitors -Corrosion Inhibitor -Flow Improver (Paraffin Inhibitor) -Pour Poitn Depressant -Biocide -pH Control (AZOLE)
The two major categories of chemical cleaning are pre-operational chemical cleaning—
part of pre-commissioning or commissioning activities—and post-operational or
maintenance chemical cleaning—part of regular shut down work.
Pre-operational chemical cleaning is performed to remove any foreign material
remaining from the construction activities either on the pipe or system fabrication. Major
considerations in the pre-operational phase include mill scale, corrosion products, weld
scale, oil, grease, sand, dirt, temporary protective coatings, and other construction
debris.
Post-operational cleaning is performed for a number of reasons, including reduced heat
transfer, reduced flow, safety (e.g., H2S, pyrophoric iron, LELs, ammonia, etc.), reduced
surface area (e.g., catalyst), access to full inspection, and more. The type and
frequency of post-operational cleaning varies with system design, operating
requirements, and history of operation and fluid/water treatment.
FourQuest Energy has developed over 127 different chemistries for a variety of
applications. View our chemical product section for more information.
INDUSTRIAL CHEMICAL CLEANING
OPERATIONAL CHEMICAL CLEANING
Ì ÑPOŎŇŒ PŎ ŃOÑÖ ÒŃMÕÕŘ ŃÕÑMŌ ŘŎÞǾ ŒŘŒPÑÖ B İ OÑŒÑ ÒŌŃÕÞŇÑÈ
A. İ OÑ ĞÒÕÕ MŌŇ Ĭ ŎMÔ Ì ÑPOŎŇ
The fill and soak method is often used for internal surface cleaning of large volume vessels and pipes
where a proper circulation is not feasible (e.g., heat exchangers, vessels, boilers, etc.). The system is
filled with a chemical cleaning solution and drained after a period of time. If necessary, this can be
repeated several times until the equipment is clean. Mineral acids have the capability to react with
metal deposits with little or no agitation. This application can be used for pre-operational and/or post-
operational (maintenance) cleaning.
1. Ì ÒŌÑǾMÕ Ė ŃÒŇ FÕÑMŌÒŌŊ – Pickling
Mineral acid cleaning is used for the removal of metallic scale and corrosion products. It is usually
applied in a three-stage operation: degreasing, metal collection, and passivation. This method has
become a last resort option due to a variety of reasons, including environmental, safety, and disposal
issues.
2. ĖÕÔMÕÒŌÑ ŒŃMÕÑ ǾÑÖ ŎQMÕ
Alkaline scale removal is used for the removal of organic deposit only. Like the fill and soak method, it is
also used if circulation is not feasible. However, increased agitation can improve the results. Steam
sparging is a common form of agitation in this method.
B. ĞÒÕÕ Mnd Circulate Method
This method involves filling a system with a chemical cleaning solution and circulating it with a pump.
This is the most common method used for chemical cleaning in the industry. It is important to keep the
fluid velocity in a certain range to avoid corrosion. Furthermore, the concentration and temperature of
the cleaning solution have to be monitored during the entire operation. As with any pickling method, it
is recommended to apply this method in three different stages: degreasing, metal collection, and
passivation.
1. FOÑÕMPÒŌŊ Ė ŊÑŌP FÕÑMŌÒŌŊ – Pickling
The most common chelating agents used in pickling are citric acid and EDTA. These agents are
recommended for both pre-operational and post-operational cleaning of steam generating systems.
Similar to mineral acids, but much safer to use, these agents are also applied in a three-stage
operation—degreasing, metal collection, and passivation. Despite the separate cleaning stages, citric
acid and EDTA are used in a single batch solution, significantly reducing the volume of waste generated
during the process.
2. Ì ÒŌÑǾMÕ Ė ŃÒŇ FÕÑMŌÒŌŊ – Pickling
Mineral acid cleaning is very similar to chelating agent pickling. It is still used often due to its low cost. It
is more commonly used on piping systems than on expensive system vessels. In addition to being
economical, the mineral acids are able to perform cleaning at ambient temperatures when used in
higher concentrations.
3. Degreasing
Degreasing usually refers to an alkaline wash of internal surfaces on the process equipment to remove,
above all else, organic matter. If incorporated with filtration, it can be used for debris removal from a
system during the pre-operational cleaning. Some of the most commonly used chemicals for degreasing
purposes, to prevent foaming, and/or to improve heat transfer on process equipment include: sodium
hydroxide, tri-sodium phosphate, sodium meta-silicate, sodium carbonate, and non-ionic surfactants.
Purposes, to prevent foaming, and/or to improve heat transfer on process equipment include: sodium
hydroxide, tri-sodium phosphate, sodium meta-silicate, sodium carbonate, and non-ionic surfactants.
- Ĭ ŎÕQÑŌP FÕÑMŌÒŌŊ
The type of solvent used for solvent cleaning should be based on laboratory studies of the deposit
sample found inside the system. This will help ensure that the expected result of the chemical cleaning is
achieved at minimum expense and risk to the system. If the system volume is large, a cutter fluid can be
used to reduce the cost of a potentially expensive solvent.
C. FMŒŃMŇÒŌŊ FÕÑMŌÒŌŊ Ì ÑPOŎŇ
When large volume vessels are not designed to sustain full liquid levels, the cascading cleaning method
is the best option. Adding chemicals at the top of the vessel and maintaining the level at the bottom is a
common method in tower cleaning.
- İ ŎR ÑǾ FÕÑMŌÒŌŊ
The cascading method is commonly used for towers with a large number of trays. A hot mixture of
chemicals is added near the top of the vessel and cascades down through the trays, dissolving any
deposit on the trays. To improve the cleaning process, it is a good practice to agitate the fluid with a gas
injected at the bottom of the tower.
D. İ R Ŏ Ĩ OMŒÑ ĞÕŎR FÕÑMŌÒŌŊ Ì ÑPOŎŇ
Two-phase flow cleaning can be applied to reduce the cost and amount of waste generated. Several
patterns can be used in two-phase flow, three of the most common being bubbly, slug, and annular
flow. Each pattern requires special engineering design to reduce the risk.
- Small diameter/volume piping
Small diameter piping can be effectively cleaned by applying a slug flow pattern. Typically, water and air
are used in specific amounts in order to produce a high cleaning force ratio.
- I MǾŊÑ ŇÒMÖ ÑPÑǾCQŎÕÞÖ Ñ ŐÒŐÒŌŊ
With proper design, annular flow can be used to clean large diameter piping. This method is cost
effective, especially if the piping was not designed for any “conventional” cleaning method.
E. Ĭ ÕÞŊ ĞÕŎR FÕÑMŌÒŌŊ Ì ÑPOŎŇ
The slug flow method is specially designed for pipeline cleaning. It applies a slug of liquid chemicals sent
between two separator pigs. The driving force to move the slug through the pipeline can be either a
liquid or a gas.
- Ĩ ÒŐÑÕÒŌÑ FÕÑMŌÒŌŊ
Any pipeline, regardless of diameter, requires a large volume of chemicals to be filled and circulated
with. To reduce amount of chemicals and waste, a slug flow method can be used to achieve very similar
results. Special attention has to be paid to the velocity and volume calculations during the pre-
engineering phase.
F. Ĭ PÑMÖ Ĩ OMŒÑ Ì ÑPOŎŇ
This method is designed for fast and efficient—and therefore economical—process plant cleaning in a
single step. The term “process plant” refers to large process vessels, reactors, exchangers, and
interconnecting piping. This is an upgraded steaming process where chemicals are injected into the
steam stream. Although diverse, this method is used more often for post-operational cleaning to
remove H2S, benzene, LELs, pyrophoric iron, mercaptans, and ammonia.
- GÑŊMŒŒÒŌŊ MŌŇ GÑŃŎŌPMÖ ÒŌMPÒŎŌ FÕÑMŌÒŌŊ
Degassing is a chemical cleaning process that eliminates dangerous gaseous elements inside petro-
chemical processing equipment. To improve the degassing process, it is recommended that
decontamination (solvent circulation) precede degassing to reduce the source of contamination (e.g.,
sludge, heavy deposits, etc.). Using a specially designed series of chemicals reduces and/or eliminates
any risk for the maintenance shut down during hot work. This method reduces both the amount of
waste and human exposure to dangerous substances during cleaning and maintenance work.
G. ĘŎÒÕÑǾ ĘŎÒÕ Î ÞPŒ
For a safe and efficient start up of steam generating equipment, it is recommended to remove any
organic matter from the internal surfaces. Construction oil and grease compounds may cause foaming
and reduce heat transfer on the tubes, which can cause tube failure. As a prevention measure, boiler
boil outs are recommended prior to start up activities. This is another alkaline way of cleaning steam
generating systems.
- FŎÖ Ö ÒŒŒÒŎŌÒŌŊ ĘŎÒÕÑǾCFŎŌŇÑŌŒÑǾ FÕÑMŌÒŌŊ
Commissioning boiler cleaning is highly recommended for any steam generating systems. The cleaning is
performed when a boiler is filled with a water-based chemical solution. The solution is heated either by
starting the boiler itself or by using steam from an external boiler. Maintaining the conditions above the
boiling point, chemical concentration, and oil content are monitored for a certain period of time or until
the oil content drops to a predetermined level.
H. ĞŎMÖ FÕÑMŌÒŌŊ Ì ÑPOŎŇ
Instead of using a large volume of concentrated chemical solution, this method uses a gas mixed with
the same concentration of chemical solution. It is appropriate for systems characterized by a large ratio
of volume to surface area. This would offer the same or very similar results with a significantly reduced
amount of chemicals used and waste generated. Based on a particular application, the nature of gas can
be determined; however, an inert gas is highly recommended for this application. The method can be
used for the following applications:
1. Large volume vessel/pipe cleaning
2. Equipment/Piping – not designed for liquid weights
I. Í ŎŖŖÕÑ FÕÑMŌÒŌŊ Ì ÑPOŎŇ
Nozzle cleaning is another method used when the volume to surface area ratio is high. Instead of filling
the entire system with costly chemicals, 360° rotating head nozzle(s) are used to spray the walls of the
vessel and keep the volume of chemicals relatively low. This allows flow and temperature of the
chemical solution to be kept in the recommended range. The most common applications of the nozzle
cleaning method are:
1. Large volume vessel cleaning
2. Storage tank cleaning
Tank chemical cleaning is a specific process that has to be designed on a case-to-case basis. Based on
the nature of the deposit, a proper solvent has to be chosen, which can minimize manpower and waste
material. The chosen solvent is then circulated with an external pump, establishing several circulation
loops. This method has several advantages to the conventional tank cleaning practice: it is a cost
effective method, reduces cleaning time, generates minimal to no waste (over 95% recovery of
hydrocarbons), requires no crew entry, and presents minimized environmental risk
PAINTING & COATING I. SCOPE :
This procedure is primarily to summarize the Requirement of the surface preparation and painting system of per client specification.
II. STANDARD, CODE & REFERENSI
Standard for c leaning and surface profile and coating system shall be conform to Standard: SSPC – ( Steel Structure Painting Council ) or NACE (National Association Of Corrosion Engineer ). And specification. The inspector and painting supervisor shall ensure by inspecting each step of works.
III. PREPARATION AND MOBILIZATION
3.1. Prepare material, equipment, and manpower to execution of work. 3.2. Prepare working permit for manpower and equipment. 3.3. Safety or ientation for all workers will be work to execution of the job.
IV. SURFACE PREPARATION
1. Sandblasting Specification
Surface Preparation system Standard SSPC – SP 10 (near white metal). Swedish Standard ( SA 2,5 ) No. # 2.
2. Sandblasting Material. Silica sand size 8 ~ 30 mesh ex Bangka (in case abrasive material is not match to the requirement other alternative shall be taken in to consideration ).
3. Working Scheme.
Prepare all of raw material piping. Prepared sandblasting equipment such as compressor, hose, nozzle and blasting hoods & pipe for worker, if everything is ready, sandblasting work can be executed.
Set – up the compressor pressure in 6 ~ 8 kg/m² during sandblasting work and distance between nozzle and plate is 3 – 4 feet. Cheek required in specification cleans of the surface vessel, piping & Tank could shown near white SP 10 for piping & vessel, sandblasting finish. If the specification is suitable to the planning
V. APPLICATION PROCEDURE
1. All coating material shall be applied with airless spray, air spray and 2 roller and touch up coating by brush for minor areas.
2. The spray angle shall be held at r ight angles to the surface and each pass shall overall the previous pass by 50%. Use Spray tip nozzle as recommended by coating manufacture.
3. All coating shall be mixed with mechanical agitor and according to proportion ratio, shall follow manufacture recommendation for each coating used.
4. All coating material shall be used before reaching the pot life internal as recommended1 by coating manufacture.
5. Thinning is may be required to compensate the application and only the recommended thinner for each type shall be used. The amount of thinner used should not exceed over the recommendation.
I. APPLICATION REQUIREMENT
1. Before each coating applied surface must be clean and attained surface roughness
according to specified cleaning degree and surface profile. 2. The surface must be always clean and dry and proper the dusting by blown air. 3. No coating shall be applied during mist or rain and relative humidity, shall be keep to
maximum 85% and surface temperature must be always above the dew point at last 3 degree Celsius. “ Sling Hygrometer: and dew point shall check humidity by dew point calculator.
4. Painting material with deteriorated during storage shall be used. II. COATING APPLICATION
1. QC and Supervisor should inspect correct type of coating, mixing and thinning in charge. 2. Any surface that not specified to be coated shall be protected. 3. During paint application wet film thickness must be regularly checked to obtain the correct
film thickness. Wet film thickness check by WFT gauge/messkamm. 4. After exposure and contaminated with the environment surface shall be fresh water
washed and prepare clean before any coating application. 5. If the maximum re coating interval exceed, roughening of the surface by sandpaper and/or
light abrasive sweeping is mandatory. III. PAINTING SPECIFICATION
All requirement detailed shall corresponding with NACE /SSPC specification. 1. Dry films thickness shall be checked according to the standard procedures ( SSPC – PA ). 2. If dry film thickness is not meet the maximum specified thickness, additional coat is
mandatory until it reached and conformed to the specification. IV. INSPECTION AND TESTING
� Surface preparation will be inspected each working days (prior painting application) using surface comparator.
� DFT shall be inspected each layer painting application by magnetic thickness gages. � DFT of paint shall be calculated by averaging readings taken the following phi losophy shall
be applied for acceptability of measured thickness. � All measured value of DFT shall be exceeding 90% of the specified value. � The number of measured film thickness, which is less than the specified value, shall be less
than 20% of total number of measurement. � Final visual inspection shall be done, if after all activities completed. � Inspection report shall be prepared per each painting application.
V. REPAIR AND TOUCH UP
After erection repair and touch up painting will be executed. The process of repair is : 1. Clean tack welds by using grinding machines and spot abrasive blast before repainting. 2. The painting work of seam we do after hydro test vessel, piping & tank finish. The system
of execution same as tack weld. 3. Touch up coating use the same system as in coating date sheet. 4. Use brush for all weld seams and for every rough weld joint.
Laboratory Equipments
Type Specification Apllication
Chemical Circulation Pump Phase 1
Total Head 10m
Cap 20L/minutes
Chemical Circulation
Chemical Circulation Pump Phase 1
Total Head 25m
Cap 50L/minutes
Chemical Circulation
Chemical Circulation Pump Phase 3
Total Head 40m
Cap 55L/minutes
Chemical Circulation
Chemical Circulation Pump Phase 3
Total Head 29m
Cap 150L/minutes
Chemical Circulation
(Solvent Base)
Chemical Circulation Pump Phase 3
Total Head 10m
Cap1083L/minutes
Chemical Circulation
Chemical Circulation Pump Phase 3
Total Head 48m
cap 240L/minutes
Chemical Circulation
Chemical Circulation Pump Phase 3
Total Head 75m
Cap 226m3 /hours
Chemical Circulation
Chemical Circulation Pump Phase 3
Total Head 75m
Cap 226m3 /hours
Explosion Proof
Chemical Circulation
Chemical Circulation Pump Phase 3
Total Head 125m
Cap 320m3/hours
Chemical Circulation
Innear Gear Pump Phase 3
Total Head 50m
Cap 45m3/hours
Sludge Pump
Specification Application
High Pressure Pump 120 bars WP 1800psi/120bars
Phase 1
Jet Washer
High Pressure Pump 140bars WP 2100psi/140bars
Phase 1
Jet Washer
High Pressure Pump 180 bars WP 2700psi/180bars
Phase 3
Jet Washer
High Pressure Pump 220 bars WP 3250psi/250bars
Phase3
Jet Washer
High Pressure Pump 250 bars WP 3700psi/250bars
Phase 3
Jet Washer
High Pressure Pump 500 bars WP 7500psi/500bars
Phase 3
Jet Washer
High Preesure Pump 500 bars WP 7500psi/500bars
Diesel Engine
Jet Washer
High Pressure Pump 1000 bars WP 14.500psi/1000bars
Diesel Engine
Jet Washer
High Pressure Pump 1500 bars WP 20000psi/1400bars
Diesel Engine
Jet Washer
Other Equipments
Specification Application
Rotatool Phase 3
(Rotating Tool)
Rotating Wire Brush
Accessories for Rotatool
- Flexible Drive
- Flexible Alkathene Drive
- Speciality Wire Brush
Flexible Drive
Flexible Drive
Specialty Wire Brush
Flexible Drive
Flexible Drive
Speciality Wire Brush
Air Gun Drive (Multi Compressor Applicabe) Air Gun Drive Air Gun Drive
Laboratory Equipment Specification Application
Spectrofotometer Hach DR-2500 Water Analysis
Spectrofotometer Hach DR-890 On-Site Water Analysis
TDS & Corductivity Meter Hach Sension 5 TDS & Corductivity Test
pH Meter Hach Sension 1
pionner 10
pH Test
Viscometer Rion VT-03F Viscosity Test
Hardness Test kit Hach HA-4P-MG-L Hardness Test
Iron Test kit Hach IR-24 Iron Test
Analytical Balances UWE NJW-150
Shimadzu BL-320H Measuring Instrument
Oven Memmert UM-400 Oven
Water Bath Memmert UM-400 General Test
Stirring Hotplate Favorit Stirring Test
Jar Test FP4 VELP Scientifica Waste Water Analysis
FlueGas Analyzer Eutron Unigas 2000+ FlueGas Analysis
Burner Soudogas X2000 Fuel Oil Treatment Test
Petrifilm 3M Microbiological Test
Safety Equipments
Safety Equipment Specification Application
Oxygen Mask Oxygen Mask Oxygen Mask
Oxygen Mask With Compressor Oxygen Mask Oxygen Mask
Fire Resistant Coat Fire Resistant Coat Fire Resistant Coat
Chemical Mask Chemical Mask Chemical Mask
Other Safety Equipment Other Safety Equipment Other Safety Equipment
Accessories for High Pressure Pumps
Type Specificatiom Application
BJV Centralizer WP 20000psi/1400bars Pipe Cleaning
Foot Valve WP 20000psi/1400bars Foot Valve
Trigger Gun WP 20000psi/1400bars Trigger Gun
Trigger Gun WP 7500psi/500bars Trigger Gun
Trigger Gun WP 4500psi/300bars Trigger Gun
High Pressure Hose 1/2" WP 20000psi/1400bars Hose
High Pressure Hose 1/2" WP 7500psi/500bars Hose
High Pressure Hose 1/4" WP 4500psi/300bars Hose
Flexible Hose Water Drive 5/32" WP 14700psi/1000bars House Intube
Flexible Hose Water Drive WP 1760psi/1200bars House Intube
Flexible Hose Water Drive 6/32" WP 14700psi/1000bars House Intube
Lance Ø 1/8" 1/8" Extension Lance For Trigger Gun
Lance Ø 1/4" 1/4" Extension Lance For Trigger Gun
Lance Ø 3/8" 3/8" Extension Lance For Trigger Gun
Lance Ø 1/2" 1/2" Extension Lance For Trigger Gun
Spray Nozzle Nozzle Nozzle
Straight Nozzle Nozzle Nozzle
Rocket Nozzle Nozzle Nozzle
Spin Jet Rotary Nozzle WP 14700psi/1000bars Nozzle
Hammelman Rotary Nozzle/Water Blasting WP 20000psi/1400bars Water Blasting
Short Lance with Regulator Sdouble Barrel 250bars Dump Gun
Type
Type
Centrifugal Pumps
High Pressure Pumps
List Equipment
Our Service In Industrial Maintenance pulp dan Paper Mill : ÊŇŌ Į Ò ÅŇĹŁĮ ÒÓL ËĮ Ĭ ŇÖĮ ÒŐ ÅŇĹŁĮÒÓL Ĉ ŇÔOǺŇŁİ Ĉ Őİ ÒŇÓÔÏ ÔĹĬ ĔĮ ÓÔĹŃĴ L ĂĹÒ Ĉ Į Ï ÔĮ ÒÓL ËĮ IJÒÏ ĬÔŇÒŐ
Removal, Fire Side Deposit Removal, Kamyr Digesters, Digester, Heaters, Batch
Digesters, White Liquor Lines, Green Liquor Lines,Black Liquor Evaporators, Black
Liquor Concentrators, Head Boxes Couch Rolls, Suction Press Rolls, Pulp & Drain Lines,
Alum Lines, Bleach Plant Towers, Stock Chests, Foundries & Wire Pits, Hydraulic &
Lube Oil Piping Turbine Blanding, Surface Condensers.
ÊĮ ÔÒŇĻĹĿ ĹÏ : ǼÕÒIJÕÒÏ Ł ĖŃĹÔL ĖÒĮ Ï ÊŁÏ ŃÔL ĖÔĹŁĹÔŐ ÅŇĹŁĮÒÓL ÊŇŁŐĮÔĶŐŁĮ ŃĮ Ė ŃĹÔL ÊĶŇÓÑĶÏÔĮ ÊŁÏ ŃÔL ǺÏ ÕÓÔĹĬ O
Chlorine, Ammonia Unit, Methanol Unit, Waste Heat Boilers Polypropylene Unit,
Acrolien, Closed /Open Cooling Systems
É ĹŁ ĂŃİ Ć Ï Ó ǺÒÕİ Į Ė ŃĹÔÓ - Vacuum & Atmosphere. Vacuum Tower, Atmospheric Tower, Heat
Exchangers, Brine Coolers, Desalters, Knock - Out Pots, Vacuum Furnace, Atmospheric
Furnace, Overhead Condensers. Exchangers, Iso. Stripper, Iso. Reboiler, Iso. Receiver,
HF Stripper, HF Stripper- Reboiler, Regenerator, Feed Preheated.
ǺÏ ÔÏ ŁŐÔĹĬ ǺÒÏ Ĭ ĻĹŃĴ Ė ŃĹÔ ǼÒÏĬ ÔĹŇŃÏ ÔŇÒ ĔŇŌ Į ÒL Ĝ Ï ÓÔĮ ĈĮ Ï Ô ÅŇĹŁĮ ÒÓL ĒŁÕÒÒŐ ÆŎĬĶÏŃĴ Į ÒÓL ǺÒŇÓÓ ǺŇŃŃĮ Ĭ ÔĹŇŃ ĎĹŃĮÓL ĒÕÒIJÏ ĬĮ ǺŇŃİ Į ŃÓĮ ÒÓ ǺŇĻĮ Ò Ĝ Ï ÔĮ ÒÓĹİ Į ÆŎĬĶÏŃĴ Į ÒÓL ǼÕÒŃÏ ĬĮ ÓL ĔŇŌ Į ÒÓL ĔÒÏ ŃÓIJĮ Ò ĎĹŃĮ ÓN
Ĉ Ǽ ĂŁĻŐŁÏ ÔĹŇŃĕÓ Ė ŃĹÔ ČÓŇN ËĮ ĬŐĬ ŁĮ ǺŇŇŁĮ Ò, Iso. Overhead Condenser , Iso. Preheater , Reactor Cooler, Polymer Surge Drum , Depro. Feed Condenser, Depro. Receiver, Bottom Cooler. Ë Į IJŇÒĿ Į Ò ǼĮ Į İ ÆIJIJŁÕĮ ŃÔ ÆŎĬĶÏŃĴ Į ÒL ĒÔÏĪ ĹŁĹØÏÔĹŇŃ O ĎĹĴ ĶÔ ÆŃİ Ó Ė ŃĹÔL ǼÕÒŃÏ Ĭ ĮÓ Building Maintenance ÅÉČĎÆË ǺĈÆĐ ČǺĂĎ CLEANING Ĝ Ï ÔĮ ÒÓĹİ Į ǺĶĮ Ŀ ĹĬ Ï Ł ǺŁĮ Ï ŃĹŃĴ L ǼĹÒĮ ÓĹİ Į Ï ŃÔĹ-corrosive Chemical Washing & Jet Cleaning, Pre-
Commissioning Cleaning, Descaling Iron & Copper Oxides Removal, Degreasing · Boiling-out,
Petroleum & Lubricating Carbonized Oils Removal, Edible Carbonized Oils Removal, Fireside Soot Deposits Removal, Fireside Vanadium & Sodium Hard Deposits Removal, Fireside dew point
and Sulfuric acid corrosion attack protection. ĈÆĂĔ ÆĞǺĈ ĂÈ ĆÆË ǺĈÆĐ ČǺĂĎ ǺĎÆĂÈČÈĆ ĂĹÒ Ĭ ŇŇŁĮ ÒÓL ŁÕĪ ŇĹŁ Ĭ ŇŇŁĮ ÒÓL Ō Ï ÔĮ Ò Ĭ ŇŇŁĮ ÒÓL IJÕĮ Ł ĶĮ Ï ÔĮ ÒÓL condensers, evaporators, cooling systems, and pipelines. Fresh & sea waterside chemical cleaning , Steam side chemical cleaning. Oil side
chemical cleaning, Air side chemical cleaning, Passivity. ĔĂÈÇ ǺĈ ÆĐČǺĂĎ ǺĎÆĂÈČÈĆ ǼŇÒ ÓÔÏ ĹŃŁĮ ÓÓ ÓÔĮ Į Ł ÔÏ ŃĻÓ Z ÊĹĬ ĻŁĹŃĴ Ï Ńİ ÑÏ ÓÓĹÖÏ ÔĹŇŃ ÓĮ ÒÖĹĬ Į PIPELINES CHEMICAL CLEANING For stainless steel and carbon steel pipelines: pickling and passivation service, oil and grease deposits removal
No. Customer Ket Customer
1 PT. Aircontech Indonesia 29 PT. Putra Bangun Citra Mandiri
2 PT. DNP Indonesia 30 PT. Saritech Pratama Mandiri
3 PT Surya Logam Kencana 31 PT. Saptakrida Karya Mas
4 PT. Bina Inplasco 32 PT. Selaras Prima Digital
5 PT. Centra Kosambi 33 PT. Sejin
6 PT. Bridgestone Indonesia 34 PT. Shinmei Electric Indonesia
7 PT. Dharmapala Usaha Sukses 35 PT. Srikandi Multi Rental
8 PT. Samator 36 PT. Soka Langgeng Utama
9 PT. Epiterma Mas Indonesia 37 PT. Timas Suplindo
10 PT. Eskimo Wieraperdana 38 PT. Panca Nabati
11 PT. Excel Metal Industri 39 PT. Citra Airindo A
12 PT. Excelindo Chandra 40 PT. Indorama Syntetics Tbk
13 PT. Pomala Binatama 41 PT. Trikusuma Grahabadi
14 PT. Nusahadi Citra Harmonis 42 PT Universal Foot ( UFU )
15 PT. LG Indonesia 43 PT. Upsol Indonesia
16 PT. Indo Surya Persada 44 PT. Wako Kogyo
17 PT. Arya Dinamika 45 PT. Keihin Indonesia
18 PT. International Recovery Service 46 PT. SK Keris
19 PT. Julung Wangi Tirta Wahana 47 PT. Unggul Indah Cahaya Tbk
20 The Peak Tower 48 PT. Kinden Indonesia
21 PT. Metalindo Prima Enginering 49 Four Season Hotel
22 PT. Indofarma 50 PT. Pelayaran Sumatra Wahana
23 PT. Astra Otoparts Tbk 51 PT. Swadaya Berlian
24 PT. Pasific Indomas 52 PT. Kumatex
25 PT. Tembaga Mulya Semanan Tbk 53 PT. Sulindafin
26 PT. Pioneer 54 PT. Danone Dairy Indonesia
27 PT. Medisafe Technologies 55 PT. Bio Industri Nusantara
28 PT. Ebara Indonesia 56 PT. Amerta Indah Otsuka
CUSTOMER LIST
working reference
Cleaning Fin Fan Cooler
Cleaning Heat Exchanger
Circulation Boiler Water Tube
Cleaning gas air heater & Economizer
Cleaning Heat Exchanger
Epoksi Floor Coating Honda Mobil Karawang
Epoksi Floor Coating Pabrik Sabun
working reference
Epoksi Floor Coating Farmasi Cikarang
Contact Us
Office :Komp. Permata Pamulang Blok i3 No.3 PamulangTangerang Selatan -15315 IndonesiaT. (+62-21) 71492067, 70561881, 70561900, 70569944F. (+62-21) 71283773, 7410224Workshop :Jl. Regenci II Blok AA -2/18Kp. Gelam Jaya Pasar Kemis - TangerangE : contactus@primaxcel.comW : www.primaxcel.com
PT. FRATA BAYUTAMA PRIMA
PT. FRATA BAYUTAMA PRIMAIndustrial Cleaning, Chemical, Maintenance, Sparepart & Painting Coating
Recommended