View
237
Download
0
Category
Preview:
Citation preview
DELHI INSTITUTE OF TECHNOLOGY & MANAGEMENTDepartment of ECE
FORMAT FOR PREPARATION OF PROJECT/ TRAINING REPORT FOR BTECH ECE
GUIDELINES FOR STUDENTS
a) The theme / topic of the Project/ Training should be current and based on latest
technology.
b) The candidate has to give a Project/ Training brief or synopsis to the In charge, and
the guide(s) will be assigned to him related to his topic before commencing the
Project/ Training work.
c) The length of the report may be about 50 to 120 page.
d) The Project/ Training must be Hard Bounded with Black Color cover and
Golden text. (Other forms of binding will not be accepted).
e) The Project/ Training must be submitted duly signed by the Guide/HOD.
f) The Project/ Training should be neatly typed on one side and in A4 size Paper or
bond paper only.
FOLLOWING TYPING INSTRUCTIONS SHOULD BE FOLLOWED
i. 1.5 line spacing should be used for typing the general text. The general text shall be justified and typed in the Font style ‘Times New Roman’ and Font size 12.
ii. Subheading shall be typed in the Font style ‘Times New Roman’ and Font size 12 and bold.
iii. Heading shall be typed in the Font style ‘Times New Roman’ and Font size 14 and bold.
iv. Chapter heading types in times new roman with font size 18 and bold.
v. Page numbers shall start from Heading Introduction inner pages of report. Certificates and rest pages will be marked in Roman Numbers.
COMPONENTS OF A PROJECT/ TRAINING REPORT The sequence in which the Project/ Training report material should be arranged and bound should be as follows:
(a) Cover page (Hard Bound)(b) Cover page(c) Declaration(d) Certificate from department(e) Certificate from Organization (f) Acknowledgement(g) Abstract(h) Table of content(i) List of Tables(j) List of Figures(k) List of Symbols, Abbreviations and Nomenclature(l) Chapters(m) Appendices(n) Bibliography/References
Students are advised to get their Project/ Training Report checked / scrutinized from Project/ Training Guide / HOD before taking printout .
SUBMISSION OF PROJECT/ TRAINING:
Submission of Project/ Training should reach the department on prescribed date. The Project/ Training report should accompany various supporting documents as described in below paragraphs. There is no need for any synopsis at this time to be submitted for the Project/ Training chosen. The student can directly submit their Project/ Training report in prescribed format. The student is required to submit hard copies of the Project/ Training report hardly bound in Black Cover and Golden Text. Student is also required to submit softcopies on CD/DVD (full source code in working condition, Database with Dummy Data and Additional required installation files if required any, Project/ Training report, presentation).
Along with this, student should also keep the soft copy of the Project/ Training, Presentation and the Project/ Training report ready for the viva-voce and presentation if required by the Examiner.
Project/ Training Title
A Project/ Training Report
submitted in partial fulfillment of the requirements
for the award of the degree
of
BACHELOR OF TECHNOLOGY (B.TECH)
in
ELECTRONICS & COMMUNICATION
By
STUDENT NAME 1 (Class Roll No)
STUDENT NAME 2 (Class Roll No)
Under the guidance of
COLEGE PROJECT/ TRAINING GUIDE NAMEDesignation of Guide
Department of Electronics & Communication
Delhi Institute of Technology & Management
MAHARSHI DAYANAND UNIVERSITY, ROHTAK(Month Year)
Declaration
I/We, Student Name(s), hereby declare that the work which is being presented in this
Project/ Training report titled “Project/ Training Name” by me/us, in partial fulfillment of
the requirements for the award of Bachelor of Technology (B.Tech) Degree in
“Electronics & Communication OR Information Technology” , is an authentic record of
my/our own work carried out under the guidance of Name & Designation of college
Guide and Name & Designation of industrial trainer.
To the best of my knowledge, the matter embodied in this report has not been submitted
to any other University/ Institute for the award of any degree or diploma.
Name
Department of Electronics & Communication
Delhi Institute of Technology & Management
Delhi Institute of Technology & ManagementNH-1 Gannaur Sonepat, Haryana
Affiliated to Maharshi Dayanand University, Rohtak & DCRUST, Murthal
Department of ECE
Certificate
This is to certify that the Project/ Training titled “Project/ Training Name” submitted
by Student Name of B.TECH _____Semester during the year _____ for the partial
fulfillment of the requirements for the degree Bachelor of Technology in Electronics &
Communication OR Information Technology is a record of the bonafide work carried out
by him/her under my guidance and supervision.
Guide Name
Designation
Department of Electronics & Communication
Delhi Institute of Technology &Management
Hod Name
Designation
Department of Electronics & Communication
Delhi Institute of Technology &Management
Photocopy of the CERTIFICATE BY the company on company letter head
AcknowledgementIt is a pleasure to acknowledge many people who knowingly and unwittingly helped us,
to complete our Project/ Training. First of all let us thank God for all the blessings, which
carried us through all these years.
I/We express my/our gratitude to HOD Name, (designation) for his/her cooperation and
encouragement during the completion of this Project/ Training.
I/We extend my/our utmost gratitude to GuideName my/our Project/ Training guide who
has always stood by our side and guided, appreciated and encouraged us to get into more
and more ventures. Continuing the same, she enlightened us in the various stages during
the development of this Project/ Training and provided us with many insights and useful
examples, which proved to be of immense help in successful completion of this Project/
Training.
I/We are grateful to our trainer Mr. /Ms....................., for the help provided in completion
of the Project/ Training, which was assigned to me. Without his/her friendly help and
guidance it was difficult to complete the assigned task.
Last but not least, I pay my sincere thanks and gratitude to all the faculty and other Staff
Members for their support and for making our training valuable and fruitful.
Student Name1 Student Name2
Abstract
Write summary of the report in one page, include: the purpose of the study; the methodology used; and a summary of the major findings, conclusions and recommendations.
Contents
Page
Declaration.............................................................................................................ii
Certificate..............................................................................................................iii
Acknowledgement.................................................................................................iv
Abstract..................................................................................................................v
List of Figures........................................................................................................vii
List of Tables.........................................................................................................viii
Introduction.............................................................................................................1
Circuit Diagram and Description………………………………………………..3
Components Description........................................................................................9
Direction Description of Robot Movement……………………………………..42
Program Code……………………………………………………………………44
Components Used………………………………………………………………..46
Applications……………………………………………………………………...48
Limitations……………………………………………………………………….49
Future Aspects…………………………………………………………………...50
Bibliography……………………………………………………………………..51
Chapter 2 System Analysis
2.1 Limitation of Existing System……………………………………….
2.2 Proposed system with objectives……………………………………….
2.3 Feasibility Study (Economical, technical, operational)…………………
Chapter 3 System Specification
3.1 Hardware Requirements
3.2 Software Requirements
Chapter 4 Software Description
4.1 Front End (along with features)
4.2 Backend (along with features)
Chapter 5 System Design
5.1 Module Description
5.2 System Flowcharts………………………………………………….
5.3 E-R Diagrams………………………………………………….
5.4 Data Flow Diagrams…………………………………………………
5.5 UML Diagram
5.6 Database Design (tables and normalization)
5.7 Input / Output form design
5.8 Screen Design
5.9 Report Design
Chapter 5 Coding
Chapter 6 System Testing
6.1 Test Cases
6.2 Unit/system Testing
6.3
Chapter 7 System Security
Checks, control, encryption etc
Chapter 8 Snapshots
Chapter 9 Conclusions
8.1 Limitations
8.2 Scope and Future Prospects
Appendices
Bibliography
List of Figures Page
Figure 1: xyz……………………………………………………………………
List of Tables Page
Table 1: xyz………………………………………………………………………
Chapter 1
Introduction1.1 Overview
1.5 Report OrganizationThe report is organized in the following way:
Chapter 1 starts with a brief introduction of sensor network, system architecture and design
issues, difference between sensor network vs traditional networks, challenges of sensor
network, clustering in WSN and application of sensors followed by the motivation of this work.
Chapter 2, gives a detailed overview of data routing. ………………………….
Chapter 3 …………………………………………….
Appendices
Appendices are provided to give supplementary information, which is included in the main text may serve as a distraction and cloud the central theme.
• Appendices should be numbered using Arabic numerals, e.g. Appendix 1, Appendix II, etc.
• Appendices, Tables and References appearing in appendices should be numbered and referred to as appropriate places just as in the case of chapters.
• Appendices shall carry the title of the work reported and the same title shall be made in the contents page also.
Bibliography
2. For textbooks - A.V. Oppenheim and R.W. Schafer, Digital Signal Processing, Englewood, N.J., Prentice Hall, 3 Edition, 1975.
3. For papers - Devid, Insulation design to combat pollution problem, Proc of IEEE, PAS, Vol 71, Aug 1981, pp 1901-1907.
Recommended