View
6
Download
0
Category
Preview:
Citation preview
CA
T P
UM
PS®
Plunger Pumps, Direct Drive, Bell Housing Bell housing and flex coupler offer direct drive option for select models
Pump Model
Maximum Flow Maximum Pressure Pumpgpm psi rpm
340, 340B 4 1800 17255CP2140WCS, 5CP2140BCS 4 2500 1725350, 350B 5 1500 17255CP2150W, 5CP2150B 5 2000 17255CP6120 7.4 1200 17255CP6180CSS 8.2 1500 17505CP6190 10 1200 17507CP6110CS 10.5 2000 17507CP6160CS 10.6 2500 1750* Brake Horse Power (BHP) = gpm x psi / 1460
Model 5CP6120(Motor, Bell Housing,
Shaft Protector Sold Separately)
Direct-Drive Mounting Components
Pump Model
Motor Bell Housing Flex CouplingFrame Assembly Assembly
340, 340B, 350, 350B182/184TC 76184.5FR 8230213/215TC 76215.5FR 8275
5CP Series
143/145TC 76056.5CP 8260182/184TC 76184.5CP 8230213/215TC 76215.5CP 8275254/256TC 76256.5CP 8217
56213/215TC 76215.7FR 8375254/256TC 76256.7FR 8380
7CP Series182/184TC 76184.7CP 8370213/215TC 76215.7CP 8375254/256TC 76256.7CP 8380 Bell Housings and Flexible Couplings
“B” Series Washout Resistant Manifolds The “B” Series was developed for car wash applications where persistent manifold washout problems exist. Field proven in the most demanding car washes for significant improvement in pump service life.
• Superior corrosion-resistant alloy• Chrome-plated finish provides wear and discoloration protection• Lifetime warranty against washout and freezing
Available Models: 310B, 340B, 350B, 5CP2120B, 5CP2140BCS, 5CP2150B Models 310B and 5CP2120B
P U M P S1 5 6 P U M P S
1-877-663-9274fax (662) 655-1234 • sales@carwashsuperstore.com
CA
T PU
MP
S®
Plunger Pumps, Belt Drive Belt drive pumps are the most flexible and most commonly used. This flexibility allows you to size pulleys to precise rpm for the desired flow.
Piston Pumps, Belt Drive Belt drive pumps are the most flexible and most commonly used. This flexibility allows you to size pulleys to precise rpm for the desired flow.
Pump Model
Maximum Flow Maximum Pressure Pumpgpm psi rpm
310, 310B 4 2200 950
5CP2120W, 5CP2120B
4 2500 9505 2000 1188
530 5 2500 11005CP6190 8 1450 14501050 10 2200 9587CP6170 11 2000 14501050 12 1800 11501540E 18 1200 11002510 20 2000 14502530 25 1200 10253535 36 1200 8003545 45 1000 765* Brake Horse Power (BHP) = gpm x psi / 1460
Pump Model
Maximum Flow Maximum Pressure Pumpgpm psi rpm
280 3.0 1000 1330430 5.0 1000 1040323 5.0 1500 1000623 6.0 1200 850820 10.0 1000 940390 12.0 600 1200* Brake Horse Power (BHP) = gpm x psi / 1460
Model 310(Rails and Shaft Protector Sold Separately)
Model 5CP2120W(Rails and Shaft Protector Sold Separately)
Model 820(Rails and Shaft Protector Sold Separately)
Pump Models Part #
280, 333, 430 25130310, 350, 310B, 350B, 5CP Series, 323, 390 118672623, 820 43139530 432567CP6170 1202201050, 1540E 307642530 26516
Not required with single side crankshaft pumps. 3535 and 3545 pumps come with shaft protector
Shaft Protector
P U M P S 1 5 7P U M P S
For updated pricing visit
carwashsuperstore.com
CA
T P
UM
PS®
KIT
S Seal Kits & Valve KitsWhen service is necessary, repairs can be made fast without special tools. Car Wash Superstore stocks service kits and parts for off-the-shelf shipping.
Pump Models Seal Kit (Requires 1)
Valve Kit(Requires 2)
1050 30913 34920
1540E 31770 31775
230 30914 30915 (1 Kit Only)
240 30914 30915 (1 Kit Only)
2510 31280 31285
2530 30952 33952
270 30914 30915 (1 Kit Only)
290 30305 30686 (1 Kit Only)
310, 310B, 310S 30623 30821
323 30305 30859 (1 Kit Only)
333 30305 30686 (1 Kit Only)
340, 340B,340S 30623 30821
350, 350B, 350S 30623 30821
3520 31039* 34235
3535 31040 34235
3545 33234 33235
3560 31280 31292 (1 Kit Only)
390 31825 34010 (1 Kit Only)
3CP1120 -1140 33983 33062
430 30305 30686 (1 Kit Only)
530 30488 30820
550 30610 30820
56 30799 33820
5CP2120B - 5CP2150B 33628 30821
5CP2120W - 5CP2150W 33628 30821
5CP2140WCS 33628 30821
5CP3120 33629 33060
5CP6120 33628 30820
5CP6180CSS 76620 34920
5CP6190 76620 34920
623 30305 30687 (1 Kit Only)
66DX Series 34262 34260
7CP6110CS 76933 34920
7CP6170 76933 34920
820 30305 30687 (1 Kit Only)
* Prior to manufacturing date of April 2011, after use 76841
P U M P S1 5 8 P U M P S
1-877-663-9274fax (662) 655-1234 • sales@carwashsuperstore.com
CA
T PU
MP
S® K
ITS
Drive Mounting ComponentsCat Pumps drive and mounting components provide proper alignment, secure mounting, and best drive options. Pump should be mounted on rigid, horizontal surface for optimum pump lubrication and to minimize vibration.
Pump Models Part # Type Size
230, 240, 270, 280, 290, 30943 H 16.5 mm
310,310B, 310S,5CP Series
30945 H 20 mm
56, 530, 7CP6170 33000 H 24 mm
1050, 1540E, 2530 30059 H 30 mm
3535, 3545 990013 B 35 mm
Hubs
Pump Models Part #
310,310B, 310S,5CPSeries, 530, 56
30611
290 30612
7CP6170, 1050, 1540E 30613
2530 30614
3535 92674
Not required for Bell House Mount
Mounting Rail Assy
92674
30612
Pump Models Part # Size Grooves Type MountingInclude
Key
310, 310B, 310S, 323, 5CP Series
30633 8" 1 A/B 20 mm Yes
56, 530, 1050, 1540E, 2530, 7CP6170
30206 10" 2 B "H" Hub No
230, 240, 270, 3CP1120, 3CP1130, 3CP1140
30244 8” 1 A/B 16.5 mm Yes
Pulleys
Pump Models Part # Type
310, 350, 310B, 350B, 310S, 350S, 5CP Series
30057 M6x6x25
1050, 1540E, 530, 56, 7CP6110CS, 7CP6170
30067 M8x7.5x25
2530 990036 M8x7x40
3535, 3545 34021 M10x8x70
Shaft Keys
34021
99003630067
30057
Part Number Description
P06107 21 oz Bottle
P06105 5 gallon, 2 - 2.5 gallon jugs
Oil
P U M P S 1 5 9P U M P S
For updated pricing visit
carwashsuperstore.com
CA
T P
UM
PS®
AC
CE
SSO
RIE
S
AccessoriesEach system requires carefully sized matching accessories to set and maintain system pressure, monitor system performance and protect system from over-pressurization. Not all systems require the same accessories. Minimally, we recommend a primary pressure regulating valve, secondary pressure relief valve and a pressure gauge.
Cat Pumps – CPC Series Regulators
Flow Range
Pressure Range Ports
Model gpm psi Inlet/Discharge By-Pass7002 0.5 - 5 500 - 2000 3/8" NPT(F) 1/2" NPT(F)7012 1.0 - 10 500 - 2000 1/2" NPT(F) 3/4" NPT(F)7022 2.5 - 25 500 - 2000 3/4" NPT(F) 1" NPT(F)7031 3.5 - 35 250 - 1000 3/4" NPT(F) 1" NPT(F)7032 3.5 - 35 1000 - 2000 3/4" NPT(F) 1" NPT(F)
Designed and manufactured in Minneapolis, MN• Longest lasting • Lower pressure override• Smooth, stable & quite operation• Flow through design• Consistent pressure
CPC Regulators
Model GPM Range PSI Range Ports
7581.100 0.5 - 6.5 800 - 2300 3/8”7693.100 2.5 - 10.5 230 - 2300 3/8”7537.100 1 - 21 230 - 2600 1/2”7595 1 - 53 260 - 2600 3/4”
Relief Valves
Model Max GPM Temp F Port
7142 25 145 1/2”7145 25 165 1/2”
Thermal Valves
Model Max GPM System PSI Port
6028 15 1000 1/2”6018 40 3000 1”
Pulsation Dampeners
Model Max GPM Max PSI Type
36140 10.5 5000 Non-Weep
36141 10.5 5000 Weep
Guns
Model GPM Range PSI Range Ports
7581 0.5 - 6.5 800 - 2300 3/8”7583 0.5 - 8 250 - 2000 3/8”7693 2.5 - 10.5 230 - 2300 3/8”7537 1 - 21 230 - 2600 1/2”7590 10 - 52 400 - 2175 1”
Unloader Valves
Model Max GPM PSI Range Ports
33960 6 300 - 1500 3/8”9940 25 1000 - 4000 3/4”
Pop-Off Valves
7595
7537
P U M P S1 6 0 P U M P S
1-877-663-9274fax (662) 655-1234 • sales@carwashsuperstore.com
CA
T PU
MP
S® C
EN
TRIFU
GA
L PU
MP
S
Centrifugal PumpsStainless steel end-suction centrifugal pumps offer dependable performance and flexibility to pump high volume liquids at low pressure. Single stage sold as either Pump Kit or Motorized Unit. Two stage sold as Motorized Unit only.
3K Series - Single StageMotors: 3 Ph, 60 Hz, TEFC, 3450 rpm, foot mounted
3K Series - Two StageMotors: 3 Ph, 60 Hz, TEFC, 3450 rpm, foot mounted
Model GPM FT/HD HP Inlet fitting
Discharge fitting
3K113WT3 38 78 0.75 1.25" 1"3K123WT3 38 105 1.5 1.25" 1"3K133WT3 38 145 2.0 1.25" 1"3K143WT3 63 76 1.0 1.25" 1"3K153WT3 63 102 1.5 1.25" 1"3K163WT3 63 145 3.0 1.25" 1"3K173WT3 90 76 1.5 1.25" 1"3K183WT3 90 105 3.0 1.50 1"3K193WT3 90 126 3.0 1.50 1"
Model GPM FT/HD HP Inlet fitting
Discharge fitting
3K502CT4 28 190 2.0 1.25" 1"3K512CT4 28 225 3.0 1.25" 1"3K522CT4 53 200 3.0 1.25" 1"3K532CT4 66 245 5.0 1.25" 1"
[Ft.]
[240]
[200]
[160]
[120]
[80]
[40]
PSI
104
86.7
69.3
52.0
34.7
17.3
PRES
SURE
GPMLPM
1038
2076
30114
40151
50189
60227
70265
80303
90341
100378
FLOW
3K532 (5 HP)
3K193 (3 HP)
3K183 (3 HP)3K173 (1-1/2 HP)
3K522 (3 HP)
3K512 (3 HP)3K502 (2 HP)
3K133 (2 HP)3K123 (1-1/2 HP)3K113 (3/4 HP)
3K143 (1 HP)
3K153 (1-1/2 HP)
3K163 (3 HP)
P U M P S 1 6 1P U M P S
For updated pricing visit
carwashsuperstore.com
CA
T P
UM
PS®
310
, 350
B P
AR
TS L
IST 310-350, 310B-350B PARTS LIST
ITEM PART NUMBERS DESCRIPTION QTY310, 340350 MATL 310B, 340B
350B MATL
2 30057 STL 30057 STL Key (M6x6x25) 15 125824 STCP R 125824 STCP R Screw, HHC, Sems (M6x16) 88 43344 AL 43344 AL Cover, Bearing 2/1/210 43343 NBR 43343 NBR O-Ring, Bearing Cover - 70D 211 43222 NBR 43222 NBR Seal, Oil, Crankshaft 2/1/215 14480 STL 14480 STL Bearing, Ball 220 45883 HS 45883 HS Rod, Connecting Assy [09/05] 325 43342 FCM 43342 FCM Crankshaft, Dual End - M18, 310, 310B 1
44945 FCM 44945 FCM Crankshaft, Single End -M10, 340, 340B 143838 FCM 43838 FCM Crankshaft, Dual End - M12, 350, 350B 1
30 44949 AL 44949 AL Cover, Blind Shaft - 340, 340B 131 828710 — 828710 — Protector, Oil Cap w/Foam Gasket 132 43211 ABS 43211 ABS Cap, Oil Filler 133 14177 NBR 14177 NBR O-Ring, Filler Cap - 70D 137 92241 — 92241 — Gauge, Oil, Bubble w/Gasket 138 44428 NBR 44428 NBR Gasket, Flat, Oil Gauge - 80D 140 126541 STCP R 126541 STCP R Screw, HHC, Sems (M6x20) 448 25625 STCP 25625 STCP Plug, Drain (1/4"x19 BSP) 149 23170 NBR 23170 NBR O-Ring, Drain Plug - 70D 150 48772 AL 48772 AL Cover, Rear [10/01] (See Tech Bulletin 090) 151 48773 NBR 48773 NBR O-Ring, Rear Cover [10/01] (See Tech Bulletin 090) 153 48769 AL 48769 AL Crankcase [05/02] (See Tech Bulletin 090) 156 43355 POP 43355 POP Pan, Oil 164 43351 CM 43351 CM Pin, Crosshead 365 43365 ZZCP 43365 ZZCP Rod, Plunger 370 43228 NBR 43228 NBR Seal, Oil, Crankcase 375 43328 S 43328 S Slinger, Barrier 388 45697 S 45697 S Washer, Keyhole (M18 x 10) 390 43367 CC 43367 CC Plunger (M20x72) 396 43235 PTFE 43235 PTFE Back-up-Ring, Plunger Retainer 397 17399 NBR 17399 NBR O-Ring, Plunger Retainer - 80D 398 45891 CU 45891 CU Gasket 399 104360 S 104360 S Retainer, Plunger w/Stud 3100 45688 PVDF 45688 PVDF Retainer, Seal, 2-Pc [04/06] (See Tech Bulletin 105) 3101 43302 — 43302 — Wick, Long Tab 3106 43305 NBR 43305 NBR Seal, LPS w/S-Spg 3120 45679 BB 45679 BB Case, Seal 3121 14200 NBR 14200 NBR O-Ring, Seal Case - 70D 3125 43307 SNG 43307 SNG Seal, HPS w/S 3139 22179 BBCP 22179 BBCP Plug, Inlet [1/2" NPT(M)] 1162 48361 D 48361 D Back-up-Ring, Seat 6163 43358 NBR 43358 NBR O-Ring, Seat - 70D 6164 43725 S 43725 S Seat 6166 43723 S 43723 S Valve 6167 43750 S 43750 S Spring, Valve 6168 44565 PVDF 44565 PVDF Retainer, Valve Spring 6172 17615 NBR 17615 NBR O-Ring, Valve Plug - 75D 6174 43849 BBCP 43849 BBCP Plug, Valve 6185 44837 BBCP 49721 SBCP Head, Manifold 1188 126520 STCP R 126520 STCP R Screw, HSH, Sems (M10x35) 2250 118672 STCP 118672 STCP Protector, Shaft (310 & 350 Only) 1260 30611 STZP 30611 STZP Mounting, Angle Rail (Belt Drive Only) 1270 30633 STL 30633 STL Assy, Pulley & Key (Inclds: 30058, 30057) (8” Pulley, 1 groove) 1275 30944 STL 30944 STL Assy, Hub & Key (Inclds: 30057, 30945) (“H” Hub) 1283 34334 — 34334 — Kit, Oil Drain (3/8" x 24") (See Individual Data Sheet) 1299 810027 BBCP 818471 SBCP Head, Complete 1300 30623 NBR 30623 NBR Kit, Seal (Inclds: 97, 101, 106, 121, 125) 1310 30821 NBR 30821 NBR Kit, Valve, Preassembled (Inclds: 162-164, 166-168, 172) 2351 33004 STZP 33004 STZP Socket, Seal Case (1/2" Drive) 1
P U M P S1 6 2 P U M P S
1-877-663-9274fax (662) 655-1234 • sales@carwashsuperstore.com
CA
T PU
MP
S® 310, 350B
EX
PLO
DE
D V
IEW
310-350, 310B-350B EXPLODED VIEW
Bold print part numbers are unique to a particular pump model. Italics are optional items. R Components comply with RoHS Directive. [ ] Date of latest production change. *Review individual parts in each kit for material code identification.
View Tech Bulletins 002, 003, 008, 024, 027, 032, 035, 036, 043, 045, 046, 049, 052, 053, 054, 073, 074, 079, 083, 090, 105 for additional information.MATERIAL CODES (Not Part of Part Number): ABS=ABS Plastic AL=Aluminum BB=Brass BBCP=Brass/Chrome Plated CC=Ceramic CM=Chrome-moly CU=Copper D=Acetal
FCM=Forged Chrome-moly HS=High Strength NBR=Medium Nitrile (Buna-N) POP=Polypropylene PTFE=Pure Polytetrafluoroethylene PVDF=Polyvinylidene Fluoride S=304SS SBCP=Special Brass/Chrome Plated SNG=Special Blend (Buna) STL=Steel STCP=Steel/Chrome Plated STZP=Steel/Zinc Plated ZZCP=Chrome Plated/Steel - Zamak
ModelsStandard 310, 340, 350
Special Brass 310B, 340B, 350BJanuary 2017
P U M P S 1 6 3P U M P S
For updated pricing visit
carwashsuperstore.com
CA
T P
UM
PS®
353
5 PA
RTS
LIS
T 3535 PARTS LIST
ITEM PART NUMBER MATL DESCRIPTION QTY2 34021 STL Key (M10x8x70) 15 125753 S Screw, HHC Sems (M8x25) 88 44542 AL Cover, Bearing 29 815279 FBR Shim, Split 2-Pc 210 12398 NBR O-Ring, Bearing Cover - 70D 211 13296 NBR Seal, Oil, Crankshaft 215 29326 STL Bearing, Roller 220 121467 TNM Rod, Connecting Assy (Inclds: 21,22,23) [10/00] 321 126749 STCP R Locking Washer (M10) 322 126593 STCP R Washer, Flat (M10.5) 623 122045 STZP Screw, HH (M10x55) 625 29325 FCM Crankshaft, Dual End (M48) 131 828710 PE Protector, Oil Cap w/Foam Gasket 132 43211 ABS Cap, Oil Filler 133 14177 NBR O-Ring, Oil Filler Cap - 70D 134 126743 STCP R Bolt, Eye (M12x1.75) (For Lifting Pump Only) 137 92241 — Gauge, Oil, Bubble w/Gasket 138 44428 NBR Gasket, Flat, Oil Gauge - 80D 140 125753 S Screw, HHC Sems (M8x25) 848 25625 STCP Plug, Drain (1/4”x19BSP) 149 23170 NBR O-Ring, Drain Plug - 70D 150 45936 AL Cover, Rear 151 16612 NBR O-Ring, Crankcase Cover - 70D 153 44487 AL Crankcase Assy (Inclds: 34, 54) 154 27488 S Pins, Guide 256 27790 POP Pan, Oil 159 92538 S Screw, HHC Sems (M6x16) 264 43864 CM Pin, Crosshead 365 † 45116 SSZZ Rod, Plunger 369 126587 STCP R Washer, Oil Seal 370 100488 NBRS Seal, Oil, Crankcase 375 43865 S Slinger, Barrier 388 45676 S Washer, Keyhole (M16) 390 43921 CC Plunger (M40x145) 395 † 89778 SS Stud, Plunger Retainer (M10x135) 396 20189 PTFE Back-up-Ring, Plunger Retainer 397 11345 NBR O-Ring, Plunger Retainer - 70D 398 44085 SS Gasket, Retainer 399 † 44084 SS Retainer, Plunger (M10) 3100 814279 PVDF Retainer, Seal, 2 Pc. (See Tech Bulletin 105) 3101 44112 — Wick, Long Tab 3106 † 44113 NBR Seal, LPS w/SS-Spg 3110 49464 BBCP R Manifold, Inlet 1112 11379 NBR O-Ring, Inlet Manifold - 70D 3117 44585 S Screw, HSH (M14x40) 4126 46494 BB Adapter, Female (See Tech Bulletin 087) 3127 44609 STG V-Packing 6128 43928 BB Adapter, Male 3141 49519 SS Spring, Large Coil (See Tech Bulletin 108) 3155 48860 NBR O-Ring, V-Packing Spacer - 90D 3156 48362 D Back-up-Ring, V-Packing Spacer 3157 49478 BB Spacer, V-Packing (See Tech Bulletin 108) 3158 48362 D Back-up-Ring, V-Packing Spacer 3159 48860 NBR O-Ring, V-Packing Spacer - 90D 3162 48363 D Back-up-Ring, Valve Seat 6163 26142 NBR O-Ring, Seat - 80D 6164 44727 S Seat, Stepped 6166 43932 S Valve 6167 44109 SS Spring 6168 44728 PVDF Retainer, Spring 6170 44729 SS Washer, Spring Retainer 6171 44644 SS Coil Spring (70kg), Valve Plug 6172 89827 NBR O-Ring, Valve Plug - 90D 6173 48364 D Back-up-Ring, Valve Plug 6174 46444 FBB Plug, Valve 6185 49465 BBCP R Manifold, Discharge (See Tech Bulletin 099 and 109) 1188 89981 S Screw, HSH (M12x70) 8260 92674 STZP R Mounting, Box Assy (Inclds: 34018) 1275 990013 STL Hub, ‘B’ 35mm w/Keyway (See Tech Bulletin 003) (Not Shown) 1299 818427 BBCP R Complete Head (Models 3535,3531,3537 Only) 1300 31040 NBR* Kit, Seal (Inclds: 97,106,112,127,155,156,158,159) 1310 34235 NBR Kit, Valve, Preassembled (Inclds: 162,163,164,166,167,168,170,172,173) 2
P U M P S1 6 4 P U M P S
1-877-663-9274fax (662) 655-1234 • sales@carwashsuperstore.com
CA
T PU
MP
S® 3535 E
XP
LOD
ED
VIE
W
3535 EXPLODED VIEW
Italics are optional items. [ ] Date of latest production change. †Production parts differnt from service parts.* Review individual parts in each kit for material identification. R Compoments comply with RoHS Directive
View Tech Bulletins 03, 024, 035, 036, 040, 041, 043, 050, 052, 053, 069, 074, 083, 095, 099, 105, 108 and 109 for additional information. MATERIAL CODES (Not Part of Part Number): ABS=ABS Plastic AL=Aluminum BB=Brass BBCP=Brass/Chrome Plated CC=Ceramic CM=Chrome-Moly D=Acetal FBB=Forged Brass
FBR=Fiber FCM=Forged Chrome-moly NBR=Medium Nitrile (Buna-N) NBRS=Buna, Silicone Free NY=Nylon PE=Polyethylene POP=Polypropylene PTFE=Pure Polytetrafluoroethylene PVDF=Polyvinylidene Fluoride S=304SS SS=316SS SSZZ=316SS/Zamak STCP=Steel/Chrome Plated STG=Special Blend (PTFE) White
STL=Steel STZP=Steel/Zinc Plated TNM=Special High Strength ZP=Zinc Plated
ModelsBrass 3535
January 2017
P U M P S 1 6 5P U M P S
For updated pricing visit
carwashsuperstore.com
5CP2120W-2150W, 5CP2120B-2150B PARTS LIST
ITEMPART NUMBER MATL
PART NUMBER MATL
PART NUMBER MATL DESCRIPTION QTY
5CP2120W5CP2120B
5CP2140WCS5CP2140BCS
5CP2150W5CP2150B
2 30057 STL 30057 STL 30057 STL Key (M6x6x25) 15 126542 STCP R 126542 STCP R 126542 STCP R Screw, Sems HHC (M8x16) 88 46910 AL 46910 AL 46910 AL Cover, Bearing 2/1/2
10 14028 NBR 14028 NBR 14028 NBR O-Ring, Bearing Cover - 70D 211 43222 NBR 43222 NBR 43222 NBR Seal, Oil, Crankshaft - 70D 2/1/215 14480 STL 14480 STL 14480 STL Bearing, Ball 220 48742 TNM 48742 TNM 48742 TNM Rod, Connecting Assy [10/01] 325 46928 FCM — — 46982 FCM Crankshaft, Dual End 1
— — 48203 FCM — — Crankshaft, Single End 130 — — 48224 AL — — Cover, Bearing Blind 132 46798 — 46798 — 46798 — Cap, Oil Filler, Domed 133 14179 NBR 14179 NBR 14179 NBR O-Ring, Oil Filler Cap - 70D 137 92241 — 92241 — 92241 — Gauge, Oil, Bubble w/Gasket - 80D 138 44428 NBR 44428 NBR 44428 NBR Gasket, Flat, Oil Gauge - 80D 140 125824 STCP R 125824 STCP R 125824 STCP R Screw, Sems HHC (M6x16) 448 25625 STCP 25625 STCP 25625 STCP Plug, Drain (1/4”x19BSP) 149 23170 NBR 23170 NBR 23170 NBR O-Ring, Drain Plug - 70D 150 46940 AL 46940 AL 46940 AL Cover, Rear 151 14044 NBR 14044 NBR 14044 NBR O-Ring, Rear Cover 153 48617 AL 48617 AL 48617 AL Crankcase 164 46746 CM 46746 CM 46746 CM Pin, Crosshead 365 48458 BBNP 48458 BBNP 48458 BBNP Rod, Plunger 370 46838 NBR 46838 NBR 46838 NBR Seal, Oil, Crankcase - 70D 375 43328 S 43328 S 43328 S Slinger, Barrier 388 45697 S 45697 S 45697 S Washer, Keyhole (M18 x 10) 390 46841 CC 46841 CC 46841 CC Plunger (M20x50) 398 46730 NBR 46730 NBR 46730 NBR Washer, Seal - 90D 399 = 48201 SS = 48201 SS = 48201 SS Retainer, Plunger w/Stud (M6) 3
100 46749 PVDF 46749 PVDF 46749 PVDF Retainer, Seal 3106 43305 NBR 43305 NBR 43305 NBR Seal, LPS w/S-Spg 3120 46843 BB 46843 BB 46843 BB Case, Seal (Press-in-style) 3121 13978 NBR 13978 NBR 13978 NBR O-Ring, Seal Case - 70D 3125 43307 SNG 43307 SNG 43307 SNG Seal, HPS w/S 3139 22179 BBCP 22179 BBCP 22179 BBCP Plug, Inlet [1/2”NPT(M)] 1162 48361 D 48361 D 48361 D Back-up-Ring, Seat 6163 43358 NBR 43358 NBR 43358 NBR O-Ring, Seat - 70D 6164 43725 S 43725 S 43725 S Seat 6166 43723 S 43723 S 43723 S Valve 6167 43750 S 43750 S 43750 S Spring 6168 44565 PVDF 44565 PVDF 44565 PVDF Retainer, Spring 6172 17615 NBR 17615 NBR 17615 NBR O-Ring, Valve Plug - 75D 6174 43849 BBCP 43849 BBCP 43849 BBCP Plug, Valve 6185 48245 W770 48245 W770 48245 W770 Manifold, Head - W770 1
49716 SBCP 49716 SBCP 49716 SBCP Manifold, Head - Special Brass 1188 126513 STCP R 126513 STCP R 126513 STCP R Screw, HSH (M8x70) 8196 22187 BBCP 22187 BBCP 22187 BBCP Plug, Discharge [3/8”NPT(M)] 1250 118672 STCP — — 118672 STCP Protector, Shaft 1260 30611 STZP R 30611 STZP R 30611 STZP R Mounting, Angle Rail (Belt Drive Only) 1265 30659 — 30659 — 30659 — Mount, Assy (Inclds: 30611, 30633, 118672) 1275 30944 STL 30944 STL 30944 STL Assy, Hub & Key (Inclds: 30057, 30945) (“H” Hub) 1283 34334 — 34334 — 34334 — Kit, Oil Drain (3/8” x 24”) (see Individual Data Sht) 1299 816650 W770 816650 W770 816650 W770 Head, Complete - W770 1
818472 SBCP 818472 SBCP 818472 SBCP Head, Complete - Special Brass 1300 33628 NBR 33628 NBR 33628 NBR Kit, Seal (Inclds: 98, 106, 121, 125) 1310 30821 NBR 30821 NBR 30821 NBR Kit, Valve, Preassembled (Inclds: 162 - 164, 166 - 168, 172) 2
CA
T P
UM
PS®
5C
P21
20W
, 5C
P21
50W
PA
RTS
LIS
TP U M P S1 6 6 P U M P S
1-877-663-9274fax (662) 655-1234 • sales@carwashsuperstore.com
CA
T PU
MP
S® 5C
P2120W
, 5CP
2150W E
XP
LOD
ED
VIE
W
5
2508
10 1115
40
283
37
25
65
53
1511
108
7075
90
172
260
168
166
163
99
188
185
163166
168
174
100
20
48
38
4950
51
98
139162
162
164
167
1745
2
164167
172
196
125121
120106
64
32
31
33
33
INLETDISCHARGE
5CP2120W-2150W, 5CP2120B-2150B EXPLODED VIEW
Bold print part numbers are unique to a particular pump model. Italics are optional items. = Production parts are different than repair parts.R Components comply with RoHS Directive. [ ] Date of latest production change. W770 effective with 97 production.
*Review individual parts in each kit for material code identification.Review Tech Bulletins 002, 003, 024, 036, 043, 053, 060, 061, 064, 073, 074, 078, 083 and 103 for additional information.
MATERIAL CODES (Not Part of Part Number): AL=Aluminum BB=Brass BBCP=Brass/Chrome Plated BBNP=Brass/Nickel Plated CC=Ceramic CM=Chrome-moly D=Acetal FCM=Forged Chrome-moly NBR=Medium Nitrile (Buna-N) PVDF=Polyvinylidene Fluoride S=304SS SBCP=Special Brass/Chrome Plated SS=316SS SNG=Special Blend
(Buna) STL=Steel STHT=Special PTFE High Temp STCP=Steel/Chrome Plated STZP=Steel/Zinc Plated TNM=Special High Strength W770=Special Alloy
ModelsBelt-Drive - 5CP2120W, 5CP2120B
Direct-Drive - 5CP2140WCS, 5CP2140BCS5CP2150W, 5CP2150B
January 2017
P U M P S 1 6 7P U M P S
For updated pricing visit
carwashsuperstore.com
GE
NE
RA
L P
UM
P®
GPHTS2210S GPHTS2212S GPHTS2215S GPWHTCK4050S
MAX. VOLUME (GPM) 4.0 4.75 4.0 5.0 40 45
MAX. PRESSURE (PSI) 2300 2300 2300 1500
MAX. SPEED (RPM) 1450 1450 950 1200 800 900
MAX. INLET PRESSURE (PSI) 125 125 125 125
MAX. FLUID TEMPERATURE 185º F 185º F 185º F 185º F
SHAFT DIAMETER (MM) 24 24 24 40
HORSEPOWER (HP) 6.3 7.5 6.3 7.5 41.1 46.2
INLET PORT THREAD 1/2” F 1/2” F 1/2” F 1 1/2” F
DISCHARGE PORT THREAD 3/8” F 3/8” F 3/8” F 1” F
CROSSES TO CAT 310 & 5CP2120W CAT 3535
FEATURES Triple plunger pump
Specifically designed to handle rigorousduty cycles, high temperatures & chemicals.
Ideal for use in car wash, carpet cleaning& other high pressure cleaning applications.
Nickel-plated inlet/outlet valve plugs
Nickel-plated forged brass manifoldwith an exclusive lifetime warranty.
Patented inlet/outlet valve cage
Dynamic low-pressure seal retainer
Superior low-pressure seal retainer
Innovative intermediate ring
Superior high-pressure seal
P U M P S1 6 8 P U M P S
1-877-663-9274fax (662) 655-1234 • sales@carwashsuperstore.com
GE
NE
RA
L PU
MP
®
GCW SERIES SPECS
SERIES MODEL# MAXGPM
MAXPSI
MAXRPM
MAXTEMP
SHAFTDIAMETER
WEIGHT(LBS.)
DIMENSIONS
CW-47 Series Vehicle Cleaning Pumps - 24 mm solid shaft
GCW2040 3.0 2500 750 165º F .945” / 24 mm 30 11.4” x 9.6” x 6.23”
GCW2040 4.0 2000 1000 165º F .945” / 24 mm 30 11.4” x 9.6” x 6.23”
GCW2040 5.0 2500 1250 165° F .945” / 24 mm 32 11.4” x 9.6” x 6.23”
GCW2004 4.0 2000 1750 165º F .945” / 24 mm 32 11.4” x 9.6” x 6.23”
GCW3040 5.0 3000 1250 165º F .945” / 24 mm 32 11.4” x 9.6” x 6.23”
CW-69 Series Vehicle Cleaning Pumps - 35 mm solid shaft
GCW1012 10 1200 750 165º F 1.378” / 35 mm 45 13.0” x 11.9” x 7.3”
GCW1012 12 1000 900 165º F 1.378” / 35 mm 45 13.0” x 11.9” x 7.3”
EZ-44 Series Pressure Cleaning Pumps - 1” hollow shaft, flanged for direct couple to gasoline enginest
GCW3040G 4.0 3000 3400 165º F 1” / 25.4 mm (Hollow) 20 8.8” x 9.4” x 6.5”
T47 Series Pressure Cleaning Pumps - 24 mm solid shaft, brass manifold
GCWTS1011 4.0 2000 1450 165º F .945” / 24 mm 32 12.2” x 9.2” x 6.9”
GCWTSS1511 4.0 3500 1450 165º F .945” / 24 mm 32 12.6” x 9.2” x 6.9”
GCWTS1011 4.5 1500 1750 165º F .945” / 24 mm 32 12.2” x 9.2” x 6.9”
GCWT1011 4.5 2000 1125 165º F .945” / 24 mm 32 12.2” x 9.2” x 6.9”
GCWTSS1021 4.5 3500 1125 165º F .945” / 24 mm 32 12.6” x 9.2” x 6.9”
GCWT921 5.0 1700 1050 165º F .945” / 24 mm 32 12.2” x 9.2” x 6.9”
GCWT1321 5.5 2100 1150 165º F .945” / 24 mm 32 12.6” x 9.2” x 6.9”
GCWT1011 5.6 1500 1450 165º F .945” / 24 mm 32 12.2” x 9.2” x 6.9”
GCWTSS1021 5.6 1700 1450 165º F .945” / 24 mm 32 12.6” x 9.2” x 6.9”
47 Series Pressure Cleaning Pumps - 24 mm solid shaft, nickel-plated manifold
GCWT9281 4.0 4000 1750 165º F .945” / 24 mm 32 12.6” x 9.2” x 6.9”
GCWTS2021 4.5 3500 1125 165º F .945” / 24 mm 32 12.6” x 9.2” x 6.9”
GCWTS2021 5.6 3500 1450 165º F .945” / 24 mm 32 12.6” x 9.2” x 6.9”
51 Series Pressure Cleaning Pumps - 3/4” hollow shaft, flanged for direct couple to gasoline engines
GCWTT2028GBF 2.8 2000 3400 165º F .75” / 19 mm (Hollow) 12 7.2” x 7.2” x 5.5”
51 Series Pressure Cleaning Pumps - 5/8” hollow shaft, flanged for direct couple to electric motors
GCWT9051EBF 2.11 1500 1750 165º F .625” / 16 mm (Hollow) 12 7.0” x 7.2” x 5.5”
GCWTT9061EBF 2.11 1500 3400 165º F .625” / 16mm (Hollow) 12 7.0” x 7.2” x 5.5”
63 Series Pressure Cleaning Pumps - 1” hollow shaft, flanged for direct couple to gasoline engines
GCWTX1510G8 4.0 3000 3400 165º F 1” / 25.4 mm (Hollow) 18 8.4” x 8.3” x 4.8”
63 Series Pressure Cleaning Pumps - 24 mm solid shaft
GCWTX1812S17 3.8 2500 1750 165º F .945” / 24 mm 19 8.4” x 8.3” x 4.8”
TX-63 SERIEST-47 SERIES TT-51 SERIES
CW-69 SERIESCW-47 SERIES EZ-44 SERIES
P U M P S 1 6 9P U M P S
For updated pricing visit
carwashsuperstore.com
HYPRO REPAIR KITSITEM# DESCRIPTION FOR PUMP#
HP3430-0493 Plunger Seal Kit 2300 Series
HP3430-0499 Oil Seal Kit 2300 Series
HP3430-0491 Valve Kit 2300 Series
HP3430-0321 Plunger Kit 3/4” 2410, 2412
HP3430-0322 Plunger Kit 7/8” 2414
HP3430-0485 Seal Kit 2410, 2412
HP3430-0486 Seal Kit 2414
HP3430-0316 Valve Kit 2400 Series
HP3430-0644 Rod Oil Seal Kit 2535S
HP3430-0641 Packing Rebuild Kit 2535S
HP3430-0643 Plunger Seal Kit 2535S
HP3430-0640 Valve Kit 2535S
HY
PR
O®
SPECIFYRIGHT OR LEFT HAND SHAFT
2300B-P SERIES HP2400B-P SERIES
HP2535S SERIES
P SERIES - TRIPLEX PLUNGER PUMP SPECS
SERIES MODEL# MAXGPM
MAXPSI
MAXRPM
MAXTEMP
SHAFTDIAMETER
INLET PORT
DISCHARGE PORT
WEIGHT(LBS.)
RAIL MOUNTING
KIT
DIRECT REPLACEMENT
2300B-P Series (Brass Head)
HP2330B-P 3.1 2500 1725 160º F 3/4” 1/2” 3/8” 19 Included CAT 310 & 5CP
HP2340B-P 4.2 2500 1725 160º F 3/4” 1/2” 3/8” 19 Included CAT 310 & 5CP
HP2345B-P 4.8 2500 1725 160º F 3/4” 1/2” 3/8” 19 Included CAT 310 & 5CP
2400B-P Series (Brass Head)
HP2410B-P 4.4 2500 1725 160º F 1” 3/4” 1/2” 41 Included CAT 310 & 5CP
HP2412B-P 5.9 2500 1725 160º F 1” 3/4” 1/2” 41 Included CAT 310 & 5CP
HP2414B-P 8 1800 1725 160º F 1” 3/4” 1/2” 41 Included CAT 310 & 5CP
2535 Series (Stainless Steel Head)
HP2535S 38 1200 800 160º F 35 mm 1 1/2” 1” 141 HP3430-0645CAT 3535 &
GENERAL 1540
P U M P S1 7 0 P U M P S
1-877-663-9274fax (662) 655-1234 • sales@carwashsuperstore.com
AR
IMIT
SU Model 313Self Serve SpecialUpgrade from all brands using the pump set listed below.
Item # Description Call for Pricing
A313R
A313L
A313RSET
A313LSET
A30113
A30114
A30108
A30103A
Pump, 4GPM 1500PSI Right Hand Shaft
Pump, 4GPM 1500PSI Left Hand Shaft
Pump Set, 4GPM 1500PSI Right Hand Shaft *
Pump Set, 4GPM 1500PSI Left Hand Shaft *
Mounting Rails for 313 Pump (Pair)
Seal Kit for 313 Pump
Valve Kit for 313 Pump (set of 3 valves)
Pump Oil, 32oz ISO100*Pump w/ mounting rails & pulley.
FlowGPM
PressurePSI
RPMMax. InletPressure
PSI
Max. FluidTemp.
InletPorts
OutletPorts
ShaftDiameter
(mm)
ShaftLocation
Weight(lbs)
Dimensions(in)
4.0 0-1500 1050 70 175°F 1/2in (2) 3/8in (2) 18mm left or right 17.5 9 L x 7.5 W x 5 H
Model 516Self Serve Operator FavoriteUpgrade from all brands using the pump set listed below.
Item # Description Call for Pricing
A516R
A516L
A516RSET
A516LSET
A30102
A30100
A30101
A30103
Pump, 5GPM 2300PSI Right Hand Shaft
Pump, 5GPM 2300PSI Left Hand Shaft
Pump Set, 5GPM 2300PSI Right Hand Shaft *
Pump Set, 5GPM 2300PSI Left Hand Shaft *
Mounting Rails for 516 Pump (2 required - sold individually)
Seal Kit for 516 Pump
Valve Kit for 516 Pump
Pump Oil, 32oz ISO100*Pump w/ mounting rails & pulley.
FlowGPM
PressurePSI
RPMMax. InletPressure
PSI
Max. FluidTemp.
InletPorts
OutletPorts
ShaftDiameter
(mm)
ShaftLocation
Weight(lbs)
Dimensions(in)
5.0 0-2000 1200 70 175°F 1/2in (2) 3/8in (4) 22mm left or right 21 10 L x 9.3 W x 5.4 H
Left Hand Pump Set
Left Hand Pump Set
P U M P S1 7 2 P U M P S
1-877-663-9274fax (662) 655-1234 • sales@carwashsuperstore.com
Model 508Dual Gun Prep Favorite
Item # Description Call for Pricing
A508R
A508L
A508RSET
A508LSET
A30115
A30110
A30111
A30112
A30103A
Pump, 10GPM 1200PSI 1200 RPM Right Hand Shaft
Pump, 10GPM 1200PSI 1200 RPM Left Hand Shaft
Pump Set, 10GPM 1200PSI Right Hand Shaft *
Pump Set, 10GPM 1200PSI Left Hand Shaft *
Mounting Rails for 508 Pump (Pair)
Seal Kit for 508 Pump
Inlet Valve Kit for 508 Pump
Outlet Valve Kit for 508 Pump
Pump Oil, 32oz ISO100
*Pump w/ mounting rails & pulley.
FlowGPM
PressurePSI
RPMMax. InletPressure
PSI
Max. FluidTemp.
InletPorts
OutletPorts
ShaftDiameter
(mm)
ShaftLocation
Weight(lbs)
Dimensions(in)
10 0-1200 1200 70 175°F 3/4in (2) 3/8in (2) 22mm left or right 20.5 10 L x 8.3 W x 5.4 H
Model TR-1105KV & TR-1110KVQuiet High Flow Series for In-Bay Automatics and More
Item # Description Call for Pricing
ATR-1105KV
ATR-1110KV
A30145
A30143
A30144
A30147
A30150
A30149
Pump, 32 GPM, 1000 PSI, 900 RPM, Dual Shaft
Pump, 23 GPM, 1500 PSI, 950 RPM, Dual Shaft
Seal Kit for TR-1105KV Pump
Inlet Valve Kit for TR-1105KV Pump
Oulet Valve Kit for TR-1105KV Pump
Seal Kit for TR-1110KV Pump
Inlet Valve Kit for TR-1110KV Pump
Oulet Valve Kit for TR-1110KV Pump
FlowGPM
(up to)
PressurePSI
(up to)RPM
Max. InletPressure
PSI
Max. FluidTemp.
InletPorts
OutletPorts
ShaftDiameter
(mm)
ShaftLocation
Weight(lbs)
Dimensions(in)
32.0 0-1000 900 70 175°F 1-1/2in (2) 1in (4) 38mm dual 81 20 L x 15.7 W x 8.6 H 23.0 0-1500 950 70 175°F 1-1/4in (2) 1in (2) 38mm dual 86 20 L x 15.7 W x 8.6 H
Left Hand Pump Set
Dual Shaft, Rails Included
1/2in (2)
3/4in (2)
ATR-1105KVATR-1110KV
arimitsupumps.com | 763.205.8341 | greg@arimitsupumps.com
AR
IMITSU
P U M P S 1 7 3P U M P S
For updated pricing visit
carwashsuperstore.com
GIA
NT
P420AMax GPM: 12.8Max PSI: 2175Max RPM: 1450Inlet Ports: (2) 1” NPTDischarge Ports: (2) 3/4” NPTCrankshaft Diameter: 28mmMax Temp: 160ºF
KIT PUMP DESCRIPTION
P09140
P420A
Plunger Packing Kit
P09143 Valve Assembly Kit
P09641 Oil Seal Kit
P07358 Rails
SPECIFYRIGHT OR LEFT HAND SHAFTWHEN ORDERING 318
SPECIFYRIGHT OR LEFT HAND SHAFTINCLUDES FLANGE & COUPLER
SPECIFYRIGHT OR LEFT HAND SHAFTWHEN ORDERING 420A
P316 P318Max GPM: 4.0Max PSI: 3045Max RPM: 1450Inlet Ports: (2) 1/2” BSPDischarge Ports: (2) 3/8” BSPCrankshaft Diameter: 24mmMax Temp: 160ºFPower: 8.4 HP
Max GPM: 5.8Max PSI: 1000Max RPM: 1750Inlet Ports: (2) 1/2” BSPDischarge Ports: (2) 3/8” BSPCrankshaft Diameter: 24mmMax Temp: 160ºFPower: 4.0 HP
KIT PUMP DESCRIPTION
P09119 P316 Plunger Packing Kit
P09145 P318 Plunger Packing Kit
P09144
BOTH
Oil Seal Kit
P09116 Valve Assembly Kit
P01161 Rails
P220Max GPM: 4.7Max PSI: 2000Max RPM: 1750Inlet Ports: (2) 1/2” BSPDischarge Ports: (2) 3/8” BSPShaft Size: 24mmMax Temp: 160ºF
Direct drive fits 184TC face motor Includes flange and coupler for direct mounting
KIT PUMP DESCRIPTION
P09164
P220E
Plunger Packing Kit
P09116 Valve Assembly Kit
P09144 Oil Seal Kit
P01161 Rails
P U M P S1 7 4 P U M P S
1-877-663-9274fax (662) 655-1234 • sales@carwashsuperstore.com
SPECIFYRIGHT OR LEFT HAND SHAFT
GIA
NTP56W
Max GPM: 6.1Max PSI: 1900Max RPM: 1420Inlet Ports: (2) 1/2” NPTDischarge Ports: (2) 3/8” NPTShaft Size: 24mmMax Temp: 160ºF
KIT PUMP DESCRIPTION
P09061
P56W
Plunger Packing Kit with Weep Seal
P09041 Valve Assembly Kit
P09202 Oil Seal Kit
P01075 Rails
LP123Max GPM: 35.4Max PSI: 1300Max RPM: 800Inlet Ports: (2) 1 1/2” NPTDischarge Ports: (2) 1” NPTShaft Size: 35mmMax Temp: 140ºF
KIT PUMP DESCRIPTION
P09477
LP123
Plunger Packing Kit
P09136 Valve Assembly Kit (requires 2 kits)
P09577 Oil Seal Kit
P07357 Rails
P536Max GPM: 26.4Max PSI: 1740Max RPM: 1450Inlet Ports: (2) 1” BSPDischarge Ports: (2) 3/4” BSPShaft Size: 30mmMax Temp: 104ºF
KIT PUMP DESCRIPTION
P09753
P536
Plunger Packing Kit
P09754 Valve Assembly Kit
P09755 Oil Seal Kit
P07358 Rails
P U M P S 1 7 5P U M P S
For updated pricing visit
carwashsuperstore.com
GO
ULD
S
NPE SERIES SPECIFICATIONS• 60 Hz, 2 pole, 3500 RPMFEATURES:• Close coupled compact, flexible design saves space, can be mounted horizontally or
vertically, & simplifies maintenance.• Standard NEMA motors are open drip-proof, totally enclosed fan-cooled or explosion
proof enclosure, with stainless steel shafts, designed for continuous duty under all conditions with single & three phase available.
• Superior, complete AISI 316L stainless steel liquid handling components for corrosion resistance, strength & durability.
• Casing & adapter have NPT threaded centerline connections, easily accessible vent, prime & drain connections with stainless plugs.
• Unique floating O-ring enclosed impeller design maintains maximum efficiencies.• Standard John Crane mechanical seal of silicon carbide, viton & stainless metal parts
with optional high temperature & chemical duty seals available.
Capacities to: 75 GPM (283L/min) at 1750 RPM 125 PSIG (9 bars)Working pressures to: 150 GPM (550L/min) at 3500 RPMHeads to: 39 feet (11 m) at 1750 RPM 212°F (100°C) with standard seal or
150 feet (50 m)at 3500 RPM 250°F (121 °C) with optional high temperature seal.
ITEMNPE
SERIESINLET OUTLET HP DRIVER VOLTAGE
GD1ST1C4E4 1 ST 1-1/4” 1” 1/2 1 Phase (TEFC) 115/120
GD1ST1D1D2 1 ST 1-1/4” 1” 3/4 1 Phase (ODP) 115/120
GD1ST1E4D4 1 ST 1-1/4” 1” 1 1 Phase (TEFC) 115/120
GD1ST1F2B4 1 ST 1-1/4” 1” 1-1/2 3 Phase (ODP) 230/460
GD1ST1F4C4 1 ST 1-1/4” 1” 1-1/2 1 Phase (TEFC) 115/120
GD1ST1G2A4 1 ST 1-1/4” 1” 2 3 Phase (ODP) 230/460
GD1ST1G4A4 1 ST 1-1/4” 1” 2 1 Phase (TEFC) 115/120
GD1ST1G9B4 1 ST 1-1/4” 1” 2 3 Phase (TEPE) 230/460
GD1ST1H4B4 1 ST 1-1/4” 1” 3 1 Phase (TEFC) 115/120
GD1ST1H9B4 1 ST 1-1/4” 1” 3 3 Phase (TEPE) 230/460
GD2ST1E4F4 2 ST 1-1/2” 1-1/4” 1 1 Phase (TEFC) 115/120
GD2ST1F4E4 2 ST 1-1/2” 1-1/4” 1-1/2 1 Phase (TEFC) 115/120
GD2ST1H4A4 2 ST 1-1/2” 1-1/4” 3 1 Phase (TEFC) 115/120
GD2ST1H9C4 2 ST 1-1/2” 1-1/4” 3 3 Phase (TEPE) 230/460
GD2ST1J1G4 2 ST 1-1/2” 1-1/4” 5 1 Phase (ODP) 115/120
GD2ST1J9G4 2 ST 1-1/2” 1-1/4” 5 3 Phase (TEPE) 230/460
GD3ST1G4E4 3 ST 2” 1-1/2” 2 1 Phase (TEFC) 115/120
GD3ST1H4B4 3 ST 2” 1-1/2” 3 1 Phase (TEFC) 115/120
GD3ST1H9B4 3 ST 2” 1-1/2” 3 3 Phase (TEPE) 230/460
GD3ST1J1A4 3 ST 2” 1-1/2” 5 1 Phase (ODP) 115/120
GD3ST1J9B4 3 ST 2” 1-1/2” 5 3 Phase (TEPE) 230/460
P U M P S1 7 6 P U M P S
1-877-663-9274fax (662) 655-1234 • sales@carwashsuperstore.com
GB SERIES SPECIFICATIONS• Maximum suction (inlet) pressure: 75 PSI.• Maximum Liquid Temperature: 160º F (71º C).• Rotation: Clockwise when viewed from motor end.• Maximum lift with foot valve: 10 ft. check NPSH curve.• 60 Hz, 2 pole, 3500 RPM
FEATURES:• Multi-stage Design: Provides steady, quiet, vibration free, operation.• Optional Stainless Steel Construction: Standard cast iron for general service or stainless for filtration applications.• O-Ring Casing Seal: Reliable high pressure sealing with easy disassembly for maintenance or repair.• Impellers and Diffusers: High resistance to corrosion and abrasion.• Bowls: 300 stainless steel rabbit lock for positive alignment with no gaskets required.• Variable Capacity: Centrifugal pump design permits selection of flow within a range for each size.• Mechanical Seal: A variety of face materials and elastomers to match application needs.• Motors: Close coupled NEMA 56J motors in open drip proof or totally enclosed design. Single phase and three phase
available. Ball bearings carry all radial and axial thrust loads. Designed for continuous operation.
GO
ULD
S
ITEM GPM HP DRIVER MATERIAL SEAL STAGES
GD5GBS1012S4 5 1 3 PH (ODP) Stainless Steel Viton 17
GD7GBS10 7 1 1 PH (ODP) Stainless Steel Viton 16
GD7GBC1014R0 7 1 1 PH (TEFC) Cast Iron Buna 16
GD7GBS1014R0 7 1 1 PH (TEFC) Stainless Steel Buna 16
GD7GBS1014R4 7 1 1 PH (TEFC) Stainless Steel Viton 16
GD7GBS1012R4 7 1 3 PH (ODP) Stainless Steel Viton 16
GD10GBS0712H4 10 3/4 3 PH (ODP) Stainless Steel Viton 8
GD10GBC1514Q0 10 1-1/2 1 PH (TEFC) Cast Iron Buna 15
GD10GBS1514Q4 10 1-1/2 1 PH (TEFC) Stainless Steel Viton 15
GD10GBC1512Q0 10 1-1/2 3 PH (ODP) Cast Iron Buna 15
GD10GBS1512Q0 10 1-1/2 3 PH (ODP) Stainless Steel Buna 15
GD10GBC2014S0 10 2 1 PH (TEFC) Cast Iron Buna 17
GD10GBS20 10 2 1 PH (ODP) Stainless Steel Viton 17
GD10GBS2014S4 10 2 1 PH (TEFC) Stainless Steel Viton 17
GD10GBC2015S0 10 2 3 PH (TEFC) Cast Iron Buna 17
GD10GBS2012S4 10 2 3 PH (ODP) Stainless Steel Viton 17
GD10GBC2017S0 10 2 3 PH (TEPE) Cast Iron Buna 17
GD10GBS2017S4 10 2 3 PH (TEPE) Stainless Steel Viton 17
GD18GBC2014N0 18 2 1 PH (TEFC) Cast Iron Buna 13
GD18GBS2014N4 18 2 1 PH (TEFC) Stainless Steel Viton 13
GD18GBC2015N0 18 2 3 PH (TEFC) Cast Iron Buna 13
GD18GBC3014Q0 18 3 1 PH (TEFC) Cast Iron Buna 15
GD18GBC3015Q0 18 3 3 PH (TEFC) Cast Iron Buna 15
GD18GBC3017Q0 18 3 3 PH (TEPE) Cast Iron Buna 15
GD18GBS3012Q4 18 3 1 PH (ODP) Stainless Steel Viton 15
GD18GBS3014Q4 18 3 1 PH (TEFC) Stainless Steel Viton 15
GD25GBS20 25 2 1 PH (ODP) Stainless Steel Viton 10
P U M P S 1 7 7P U M P S
For updated pricing visit
carwashsuperstore.com
STA-R
ITE
ITEM# GPM PSI HP Volts Phases
SRHPS7E5 207 1
Single
SRHPS7E3 Three
SRHPS10G10 196 2
230 Single
SRHPS10G3 Three
SRHPS20H3 18 207 3 Three
STA-RITE HIGH-PRESSURE BOOSTERSCast Iron, 1/2 thru 3 HP, 7 thru 30 GPM
Some of the most durable booster pumps available. The SignaSeal floating impeller design minimizes thrust loads allowing for continuous operation without damage to motor bearings, mechanical seal, or pump hydraulic components.
Key Features• Proven SignaSeal staging system utilizes a ceramic wear surface that dominates with 1st-in-class performance
• Superior sand-handling and thrust management staging system• Precision-molded acetal impellers for perfect balance. Ultra-smooth for highest performance and efficiency
• Precision-molded diffusers offer superior performance with high resistance to corrosion and abrasion
• Precision lapped and highly polished carbon-ceramic mechanical shaft seal with stainless steel parts guarantees continuous water lubrication
• Superior motor winding insulation materials protect against excessive moisture and contaminants assuring prolonged motor life
• Precision rotor is die-cast under high pressures for uniform performance and greater efficiency
• All electrical components are protected from dirt, dust, and insects by a dustproof canopy which the ventilating air cannot contaminate
WarrantyLimited 1-year warranty
SpecificationsPERFORMANCE SERIES: 7 thru 30 GPM Series availableHORSEPOWER: Available in 1/2 thru 3 HPVOLTAGE: Available in 115v / 230v or 208v-230v/460v, 60 Hz, 1-phaseNUMBER OF STAGES: 6 to 16 (model dependent)INLET SIZE: 3/4” to 1-1/2” NPT (model dependent)OUTLET SIZE: 3/4” to 1-1/2” NPT (model dependent)MAX INLET PRESSURE: 80 PSIMAX WORKING PRESSURE: 315 PSIMAX SUCTION LIFT: 15 ftMAX WATER TEMP: Prolonged use with liquids above 140° F is not recommendedDISCHARGE MATERIAL: Cast IronMOTOR ADAPTER & BASE: Cast IronSHELL: 304 Stainless SteelIMPELLER: AcetalDIFFUSER: PolycarbonateSHAFT: 304 Stainless SteelO-RINGS: BUNA-NMECHANICAL SEAL: Carbon/ceramic, BUNA-N
SIGN UP & SAVE
*Some restrictions apply. Call 877-663-9274 or go to CarWashSuperstore.com for complete details.
No minimum order size.
No complicated reward levels.
Join the Elite Club for only $99.
P U M P S 1 7 9P U M P S
For updated pricing visit
carwashsuperstore.com
FLO
JET
MODEL G57ITEM # DESCRIPTION
F5700S Santoprene Use for Soap
F5700V Viton Use for Harsh Chemicals
F5700K Kalrez Chemical Resistant
APPLICATIONS:• Foam Arch Systems • Foam Brushes• Chemical Injection • Chemical Transfer
FEATURES• Flow rate from 0 to 5 GPM• Operating pressures to 100 PSI• Self-priming Automatic Demand Control
REPAIR KITS & PARTS FOR 5700ITEM # DESCRIPTION
FK209821 Mounting Bracket
FK207400Check Valve Assembly Kit
(Santoprene, 4 per kit)
FK207400V Check Valve Assembly Kit (Viton, 4 per kit)
FK20730Diaphragm Kit
(Satnoprene, includes pistons, 2 per kit)
FK20730VDiaphragm Kit
(Viton, includes pistons, 2 per kit)
FK20751S Shaft Slide Kit (Santoprene)
FK20751V Shaft Slide Kit (Viton)
FK207931 Hardware Kit (2/kit) for 1/2” pump
MODEL 5100ITEM # DESCRIPTION
F51040 Santoprene Use for Soap
F51020 Viton Use for Harsh Chemicals
F51050 Geolast Use for Oils
APPLICATIONS:• Chemical Injection • Foam Brushes• Fragrance Dispensing • Wheel Cleaning• Degreaser Dispensing
FEATURES• Flow rate from 0 to 2 GPM• Operating pressures to 75 PSI• Self-priming Automatic Demand Control
REPAIR PARTS: F51040 - SANTOPRENEITEM # DESCRIPTION
FK20466SDiaphragm kit
(includes pistons, 2 per kit)
FK20467S Check Valve Assembly (4 per kit)
FK20469S Spool Valve & U Spring
REPAIR PARTS: F51020 - VITONITEM # DESCRIPTION
FK20466VDiaphragm kit
(includes pistons, 2 per kit)
FK20467V Check Valve Assembly (4 per kit)
FK20469V Spool Valve & U Spring
PLUG IN PORT FITTINGSITEM # SIZE FITTING TYPE O-RING USE
FK20381-000 1/2” 14 Pipe Thread (QEST) Straight EPDM Potable
FK20381-026 10/13mm Hose Barb Straight EPDM Potable
FK20381-070 10/13mm Hose Barb Straight Viton Chemicals
FK20381-002 1/2” Hose Barb Straight EPDM Potable
FK20381-024 10/13mm Hose Barb 90° Elbow EPDM Potable
FK20381-039 1/2” NPT Straight EPDM Potable
FK20381-064 1/4” OD Push-In Tube Fittings Straight EPDM Potable
FK20381-058 3/8” OD Push-In Tube Fittings Straight EPDM Potable
FK20381-060 3/8” OD Push-In Tube Fittings Straight Viton Chemicals
FK20381-061 1/2” OD Push-In Tube Fittings Straight EPDM Potable
FK20381-063 1/2” OD Push-In Tube Fittings Straight Viton Chemicals
DUAL PUMPSITEM # GPM DESCRIPTION
F25740 10 Santoprene
F25720 10 Viton
P U M P S1 8 0 P U M P S
1-877-663-9274fax (662) 655-1234 • sales@carwashsuperstore.com
FLOJE
T
DIAPHRAGM PUMPS
APPLICATIONS:• Carpet Cleaning• Extraction• Tire Cleaning• Presoak
BYPASS: Pump continues to run and internally bypass if discharge is partially or fully closed.
PRESSURE SWITCH: Pressure switch automatically starts and stops pumps at specific pressure settings.
QUAD SERIES
FEATURES:• Built-in pressure switch automatically starts and stops pump when discharge valve opens and closes• Compact design and plug-in port fittings make installation easy• Can run dry without damage and handle liquids up to 130°F (54°C)• Excellent self-priming capability; pump may be located above the liquid level
ITEM# VOLTS SEALS GPM PSI CONTROL SIZE
FP04300042A 115 Santo/EPDM 3.5 45 Pressure Switch 1/2” HB
FP04300043A 115 Santo/EPDM 5.0 45 Pressure Switch 3/4” HB
FP04300525A 115 Santo/Viton 5.0 45 Pressure Switch, Power Cord & Plug 3/4” HB
FP04100512A 115 Santo/Viton 3.5 No Switch 1/2” HB EL
FP04300143A 12 Santo/EPDM 5.0 45 Pressure Switch 3/4” HB
FP04300504A 12 Santo/Viton 5.0 45 Pressure Switch 3/4” HB
DUPLEX II SERIES
FEATURES:• Self-priming up to 8’ (2.4m) • Can run dry without damage• Chemically resistant materials • Internal bypass standard• Built-in back-flow preventer • Heavy-duty ball bearing drive system• UL, CSA and CE models available
ITEM# VOLTS SEALS GPM PSI CONTROL SIZE
FP04325143A 12 Santo/EPDM 4.3 40 Pressure Switch, Strainer 3/4” HB, G.H.
FP3635E7011A 115 Santo/EPDM 2.0 100 Pressure Switch, Bypass 3/8” FNPT
FP02100032A 115 Santo/EPDM 1.85 60 Pressure Switch 3/8” FNPT
FP02100022A 115 Viton/Viton 1.85 60 Pressure Switch 3/8” FNPT
FP02130032A 115 EPDM/EPDM 2.1 95 Pressure Switch 3/8” FNPT
FP02100232A 230 Santo/EPDM 1.6 60 Pressure Switch 3/8” FNPT
FP02100689A 230 Santo/EPDM 1.6 58 Bypass, Discharge Left 3/8” FNPT
FP21X003A 12 Santo/Viton 1.6 60 Bypass, Rocker Switch, Fuse 3/8” FNPT
FP3131V5011A 12 Viton/Viton 1.6 60 Pressure Switch 3/8” FNPT
OSCILLATING PUMPSITEM# VOLTS SEALS GPM SIZE
FP508224A 115 Viton 0.4 1/8” FNPT
Duplex II Series
Quad Series
P U M P S 1 8 1P U M P S
For updated pricing visit
carwashsuperstore.com
DIL
UTI
ON
SO
LUTI
ON
S1 8 2
Electric Diaphragm Metering Pumps For Vehicle WashThe PKX diaphragm metering pumps are perfect for presoaks, detergents, waxes, and drying agents. Simple to use, highly reliable, and can be wall or foot mounted.
Pumps include 6 1/2’ (2 meters) of discharge tubing, 13’ (4 meters) of suction and bleed-off tubing, mounting hardware, foot filter, and injection valve.
PKX Standard Features
Long lasting one-piece Teflon® diaphragm design Range from .55 to 2.82 ounces per minute
Suction stops immediately when powered off Flashing LED indicates pump is operating
Hot water applications up to 140ºF Manual air bleed pump head for fast priming
Adjustable while running 24 or 120V - 50/60 Hz
PKX Pump Accessories
IMAGE
PRODUCT PUMP HEAD INJECTION VALVE FOOT FILTER TUBING KIT
ITEM # DOSA-SCP0003002 DOSA-2144009 DOSA-2142001 DOSA-2061002
DESCRIPTION
Pump head,polypropylene
with FPM (Viton®) lip valves
Injection valve, polypropylene
with FPM (Viton®), 4 x 6 mm tubing
Foot filter, polypropylene
with FPM (Viton®), 4 x 6 mm tubing
Injection valve and foot filter, polypropylene with FPM (Viton®)
and 4 x 6 mm PVC and polyethylene tubing
PKX Model Number DescriptionDOSA-PKX0107510EA 120 Volt .55 oz / minute
DOSA-PKX0114601EA 24 Volt .55 oz / minute
DOSA-PKX0129010EA 120 Volt 1.13 oz / minute
DOSA-PKX0129401EA 24 Volt 1.13 oz / minute
DOSA-PKX0108510EA 120 Volt 2.82 oz / minute
DOSA-PKX0129801EA 24 Volt 2.82 oz/ minute
Wall Mounted
Foot Mounted
Wetted Parts MaterialsPump Head Polypropylene
Diaphragm PTFE (Teflon®)
Suction Tube PVC
Valves FPM (Viton®)
Seals FPM (Viton®)
Discharge Tube Polyethylene
P U M P S1 8 2 P U M P S
1-877-663-9274fax (662) 655-1234 • sales@carwashsuperstore.com
BLU
E-W
HITE
& FLO
W M
ETE
RS
C1500N SERIES INJECTION PUMPSITEM # OZS./MIN. VOLTS
BWP15N302X66 1.4 115
BWP15N202X 2.4 115
BWP15N432X 5.9 24
BWP15N402X 5.9 115
BWP15N404X 10.6 115
ITEM# PART DESCRIPTION
BWPC535K6-6 Pump Head Kit for C-Series Pumps
BWPK406VT Diaphragm Kit Viton/Teflon
BWPP014HD6V Anti-Siphon Valve
C1700N SERIES INJECTION PUMPS• BW Dual Head 40.4 oz. per minute - 115V• Twin, Heavy Duty, double ball valve cartridge heads
independently controlled by a top mounted controller• Can be used to inject different chemicals into the same system
(blend) or inject the same chemical into separate systems• Double-ball inlet and outlet• Cartridge type check valves, PVDF body, ceramic balls,
and Viton o-rings• Corrosion and weather resistant Valox housing
BWP17N483X Injection Pump-Dual Head
BWPC406T17N Diaphragm Kit
DWYER FLOW METERS• Designed to regulate or register flow rate of liquid
product• Acrylic plastic body• Maximum pressure up to 100 PSI• Metal mounting inserts tapped with 10/32” thread• Maximum temperatures up to 120° F
ITEM # DESCRIPTION GPH
VL0150 Adjustable .6-5.0
VL0200 Adjustable 2-10
VL0275 Adjustable 3-20
VL0100 Non-Adjustable 2-10
VL0250 Non-Adjustable 3-20
VL0300 Non-Adjustable 8-40
FLOW METERS• Panel mount installation• 316 Stainless Steel Guide Rod• Max PSI 175• Max Temp 212°
ITEM # DESCRIPTION GPM
F-44500LE-8 1/2” Non-Adjustable .5-5.0
F-44500LA-8 1/2” Adjustable .5-5.0
F-44750LE-8 1/2” Non-Adjustable 1.0-10.0
F-44750LA-8 1/2” Adjustable 1.0-10.0
FLOW METERS• Viton• 120V• One piece machined, polished acrylic meter body• Annealed for added strength & chemical resistance• Acceptable for outdoor installations • Adapters: Male • Panel mount installation• Bulkhead nuts attach directly to inside panel
ITEM # DESCRIPTION GPM
BWPF55376L 3/8” Non-Adjustable .2-2.0
BWPF55376LA 3/8” Adjustable .2-2.0
BWPF55500L 1/2” Non-Adjustable .5-5.0
BWPF55500LA 1/2” Adjustable .5-5.0
P U M P S 1 8 3P U M P S
For updated pricing visit
carwashsuperstore.com
PR
OC
ON
Clamp
CouplingAdapter
Drive Stem
PROCON PARTSITEM# DESCRIPTION
PCA10481C Adapter for 56C
PCA3207 Adapter for 3600
PCC3045 5/8” x 7/16” Coupling
PCC32061 5/8” x 5/8” Coupling
PCC1113 V-Band Clamp
PCC1143 Drive Stem
PROCON® PUMPS have the unique ability to handle many liquids with low lubricating characteristics at relatively high pressures. Most Procon® pumps are self priming. Flow remains constant over the entire pressure range. Procon® Vane Pumps do not have to be lubricated and are virtually maintenance-free throughout their entire life except for cleaning the strainer. Excellent for tire cleaner, pre-soak, spot-free, RO water, and foam brush.
PUMPS & SPECS
ITEM # BODY GPH TEMP OF MAX PSIMAX OPERATING
PSIMOUNT STYLE
PORT SIZE
PCC111A080F11AB Brass 80 150 150 120 Clamp 3/8”
PCC101A100R11BB* Brass 100 150 150 120 Clamp 3/8”
PCC102A100R11BB Brass 100 150 150 120 Clamp 3/8”
PCC102A100F11XX Brass 100 150 250 200 Clamp 3/8”
PCC102A140R11BC Brass 140 150 99 75 Clamp 3/8”
PCC104B115F11BB Brass 115 150 150 120 Clamp 1/2”
PCC104B140F11BA Brass 140 150 250 200 Clamp 1/2”
PCC104B190R11BC099 Brass 190 150 99 75 Clamp 1/2”
PCC114B190F11BA Brass 190 150 250 200 Clamp 1/2”
PCC104B240R11BC Brass 240 150 99 75 Clamp 1/2”
PCC104B240R11BB Brass 240 150 150 120 Clamp 1/2”
PCC104B240F11BA Brass 240 150 250 200 Clamp 1/2”
PCC114B330F11XX Brass 330 150 250 200 Clamp 1/2”
* Integral Strainer
PCC103A100F31BC SS 100 150 99 75 Clamp 3/8”
PCC103A100R31BB SS 100 150 150 120 Clamp 3/8”
PCC105B240R31BB SS 240 150 150 120 Clamp 1/2”
PCC105B240F31BA SS 240 150 250 200 Clamp 1/2”
PC102E100R11BB Brass 100 150 150 120 Flange 3/8”
PC104E140F11BA Brass 140 150 250 200 Flange 1/2”
PC104E165F11BB Brass 165 150 150 120 Flange 1/2”
PC104E240F11BA170 Brass 240 150 170 140 Flange 1/2”
PC104E240R11XX* Brass 240 150 250 200 Flange 1/2”
PC104E240F11XX** Brass 240 150 250 200 Flange 1/2”
PC104E265F11XX Brass 265 150 250 200 Flange 1/2”
* FLUOROCARBON ** FDA GRADE NITRILE
PC105E240F31XX* SS 240 150 250 200 Flange 1/2”
PC115E240F31BA SS 240 150 250 200 Flange 1/2”
PC115E265F31BA200 SS 265 150 200 170 Flange 1/2”
PC115E330F31XX SS 330 150 250 200 Flange 1/2”
PC106N480F11XX SS 480 150 250 200 Flange 1”
* No relief valve, no setting
PROCON MOTORS
ITEM # SIZEPRO-
CON #MOUNT STYLE
FRAME VOLTAGE REQUIREMENTS
PCMO115 1.5HP 950 FLANGE 56C Dual Voltage / 60Hz, Single Phase
1048-1C adapter & Coupling
PCMO12 1/2 HP 971 CLAMP 48Y Dual Voltage, Dual Frequen-cy, Single Phase
V-Band Clamp
PCMO13 1/3 HP 828 CLAMP 48Y Dual Voltage, Dual Frequen-cy, Single Phase
V-Band Clamp
PCMO14 3/4 HP 872 CLAMP 48Y Dual Voltage / 60Hz, Single Phase
V-Band Clamp
P U M P S1 8 4 P U M P S
1-877-663-9274fax (662) 655-1234 • sales@carwashsuperstore.com
HYDRAULIC MOTORSITEM# DESCRIPTION
FH151-G0036 Oscillator or Spinner Motor
FHMDN-7942 PDQ Gatlin Gun Motor
FH151-2125Hydraulic Motor
(replaces Char-Lynn #101-1004-009)
FH151-1290004Hydraulic Motor
(replaces Char-Lynn #129-0004)
FH151-2344 Carriage Motor
FH151-7236 Gantry Motor
FHMDN-7936Nu-Star Wrap Motor
(replaces Char-Lynn #130-1008-030)
FHMDN-61815Nu-Star Drive Motor
(replaces Char-Lynn #130-1007-030)
FHMDN-8176Hydraulic Motor
(replaces Char-Lynn #9041-151-2042)
* Service parts, seal kits, epoxy coating and nickel plating available.
FH151-G0036 FH151-7236
We carry a complete line of Hydraulic motors.
1-GROOVECAST IRON PULLEYSITEM# OUTSIDE DIAM.
MBL31 3.15”MBL33 3.35”MBL35 3.55”MBL37 3.75”MBL39 3.95”MBL42 4.25”MBL44 4.45”MBL47 4.75”MBL57 5.75”MBL49 4.95”MBL52 5.25”MBL54 5.45”MBL59 5.95”MBL62 6.25”MBL64 6.45”MBL67 6.75”MBL69 6.95”MBL72 7.25”MBL77 7.75”MBL97 9.75”
2-GROOVECAST IRON PULLEYSITEM# OUTSIDE DIAM.
2MBL33 3.35”2MBL35 3.55”2MBL37 3.75”2MBL39 3.95”2MBL42 4.25”2MBL44 4.45”2MBL47 4.75”2MBL49 4.95”2MBL52 5.25”2MBL54 5.45”2MBL57 5.75”2MBL59 5.95”2MBL62 6.25”2MBL64 6.45”2MBL67 6.75”2MBL77 7.75”2MBL87 8.75”2MBL97 9.75”
H-BUSHINGSITEM# SIZE
HB0010 3/4”HB0015 7/8”HB0020 1”HB0025 1 1/8”HB0030 1 3/8”HB30942 16.5 mmHB01065 18 mmHB30945 20 mmHB01056 22 mmHB33000 24 mmHB30234 25 mmHB30059 30 mmHBBH35 35 mm
MO
TOR
S • PU
LLEY
S • BU
SHIN
GS
P U M P S 1 8 5P U M P S
For updated pricing visit
carwashsuperstore.com
MO
TOR
S
LESSON PREMIUM EFFICIENT MOTORSITEM# HP PHASE ENCLOSURE FRAME RPM WEIGHT131509.00 2 1 ODP 182T 1800 65
131533.00 3 1 ODP 184T 1800 83
131856.00 5 1 ODP 184T 1800 95
110420.00-C FACE 1-1/2 1 TEFC 56C 1800 40
131545.00-C FACE 3 1 TEFC 184TC 1800 82
131540.00-C FACE 5 1 TEFC 184TC 1800 104
131519.00 3 3 ODP 182T 1800 77
131520.00 5 3 ODP 182T 1800 95
170142.60 7-1/ 2 3 ODP 213T 1800 163
170144.60 10 3 ODP 215T 1800 203
170009.60 25 3 ODP 256T 1800 414
132079.00-C FACE 3 3 TEFC 182TC 3600 70
131504.00-C FACE 3 3 TEFC 182TC 1800 75
131502.00-C FACE 5 3 TEFC 184TC 1800 99
140521.00-C FACE 7-1/2 3 TEFC 213TC 1800 144
Leeson AC motors are designed to both EPACT and Premium energy-efficiency mandates. They meet the energy efficiency requirements of the United States and Canada for general-purpose industrial motors while delivering new levels of starting torque, overload capability and reliability. • Durable rolled steel frame• Class B insulation• UL recognized Component Listing and CSA approved • 3 year warranty
BALDOR MOTORSITEM# HP PHASE ENCLOSURE FRAME WEIGHTBM3211T 3 3 ODP 182T 55 lbs.
BMC3218TC-OD 5 3 ODP 184T 69 lbs.
BMC3211T (C-Face) 3 3 TEFC 182TC 66 lbs.
BMC3218TC-FC (C-Face) 5 3 TEFC 184TC 78 lbs.
BML1408T 3 1 ODP 184T 77 lbs.
BML1410T 5 1 ODP 184T 82 lbs.
BMCL1408TM (C-Face) 3 1 ODP 184TC 90 lbs.
Other models available.
P U M P S1 8 6 P U M P S
1-877-663-9274fax (662) 655-1234 • sales@carwashsuperstore.com
GA
UG
ES
& R
EG
ULA
TOR
S
PIGGYBACKAIR FILTERS/REGULATORSITEM# SIZEARP29221 1/4”
ARP29231 3/8”
ARP29241 1/2”
GNL200R Recommended Gauge
MINI AIR REGULATORSITEM# SIZE/DESCRIPTIONAR127112-020BK 1/8” Non-Relieving
R12R-02 1/4” Relieving
AR129121
R12R-02
AR127122
MINI AIR REGULATORSITEM# SIZE/DESCRIPTIONAR127112 1/8” Relieving
AR127122 1/4” Relieving
AR127142 1/4” Non-Relieving
MINI AIR REGULATORSITEM# SIZE/DESCRIPTIONAR129120 1/8” Relieving
AR129121 1/4” Relieving
MINI AIR REGULATORSITEM# SIZE/DESCRIPTIONPR36401 1/8” Non-Relieving
PR36402 1/4” Relieving
PR36403 3/8” Non-Relieving
ARP29221
LIQUID FILLEDPRESSURE GAUGE2 1/2” Diameter
1/4” BOTTOM MOUNT
ITEM #
GL60B 0-60
GL100B 0-100
GL200B 0-200
GL300B 0-300
GL400B 0-400
GL1000B 0-1000
GL2000B 0-2000
GL3000B 0-3000
GL5000B 0-5000
1/4” REAR MOUNT
ITEM #
GL100R 0-100
GL200R 0-200
GL300R 0-300
GL400R 0-400
GL1000R 0-1000
GL2000R 0-2000
GL3000R 0-3000
MINI NON-LIQUIDPRESSURE GAUGES1 1/2” Diameter1/8” connection
ITEM #
GNL160R 0-160 Rear Mount
GNL160B 0-160 Bottom Mount
MINI LIQUIDPRESSURE GAUGES1 1/2” Diameter1/8” connection
ITEM #
GL60R 0-60 Rear Mount
GL160R 0-160 Rear Mount
NON-LIQUID FILLEDPRESSURE GAUGE2” Diameter
1/4” BOTTOM MOUNT
ITEM #
GNL100B 0-100
GNL200B 0-200
GNL300B 0-300
1/4” REAR MOUNT
ITEM #
GNL100R 0-100
GNL200R 0-200
GNL300R 0-300
WATER/AIR REGULATORITEM# SIZE/DESCRIPTIONKR06221 1/4” Non-Relieving
MINI AIR REGULATORITEM# SIZE/DESCRIPTIONKR07200 1/4” Relieving
P U M P S1 8 8 P U M P S
1-877-663-9274fax (662) 655-1234 • sales@carwashsuperstore.com
PO
P O
FF VA
LVE
S
Pop-Off ValvesPop-off valves are an economical secondary pressure relief protection opens when system exceeds preset pressure. Use in conjunction with a pressure regulator or unloader.
CAT POP-OFF VALVESITEM# INLET DISCHARGE GPM MIN PSI MAX PSI
30960 1/4" MPT 3/4" Barb 6 300 1500
33960 3/8" MPT 3/4" Barb 6 300 1500
9940 3/4" MPT 1" Barb 25 1000 4000
GP THERMAL PROTECTORSITEM# INLET HOSE BARB RELIEF TEMP DESCRIPTION
GP100556 1/4" MPT 1/4" 145° 90° Hose Barb
GP100557 3/8" MPT 1/4" 145° 90° Hose Barb
GP100558 1/2" MPT 1/4" 145° 90° Hose Barb
GP SAFETY RELIEF VALVEITEM# INLET DISCHARGE GPM MIN PSI MAX PSI MAX TEMP
GP100728 1/4" MPT End 6.0 2000 6000 195°
GP100534 3/8" MPT End 6.0 2000 6000 195°
GP100729 1/2" MPT End 6.0 2000 6000 195°
GIANT POP-OFF RELIEF VALVESITEM# INLET GPM MAX PSI MAX TEM DESCRIPTION
P22550A 1/4" MPT 10 1200 160° Silver Spring
P22530A 3/8" MPT 10 1200 160° Silver Spring
P22560A 1/4" MPT 10 2400 160° Red Spring
P22531A 3/8" MPT 10 2400 160° Red Spring
P22565A 1/4" MPT 10 3600 160° Orange Spring
P22532A 3/8" MPT 10 3600 160° Orange Spring
P22568A 1/4" MPT 10 5000 160° Blue Spring
P22533A 3/8" MPT 10 5000 160° Blue Spring
GIANT THERMAL RELIEF VALVESITEM# INLET GPM MAX PSI MAX TEM
P23420B 1/4" MPT 8 90 140°
P23421B 3/8" MPT 8 90 140°
P23422B 1/2" MPT 8 90 140°
GP SAFETY RELIEF VALVE WITH HOSE BARBITEM# INLET DISCHARGE GPM MIN PSI MAX PSI MAX TEMP
GP100724 1/4" MPT Side 1/4" Barb 6.0 2000 6000 195°
GP100723 3/8" MPT Side 1/4" Barb 6.0 2000 6000 195°
GP100722 1/2" MPT Side 1/4" Barb 6.0 2000 6000 195°
P U M P S 1 8 9P U M P S
For updated pricing visit
carwashsuperstore.com
PR
ESS
UR
E R
EG
ULA
TOR
& R
ELI
EF
VA
LVE
S
CAT RELIEF VALVESITEM# INLET OUTLET TYPE PSI TEMP GPM MATERIAL
7581.100 3/8" FPT 3/8" FPT L 800-2300 160° 0.5-6.5 Brass
7693.100 3/8" FPT 3/8" FPT L 230-2300 140° 2.5-10.5 Brass
7537.100 1/2" FPT 1/2" FPT L 230-2600 140° 1-21 Brass
7595 3/4" FPT 3/4" FPT L 260-2600 140° 1-53 Brass
GP BALANCED RELIEF VALVESITEM# INLET OUTLET TYPE MAX PSI TEMP GPM MATERIAL
RG624 3/8" FPT 3/8" FPT L 2450 195° 6.3 Brass
RG6242 3/8" FPT 3/8" FPT T 2450 195° 6.3 Brass
RG624K Repair Kit
GP BALANCED RELIEF VALVESITEM# INLET OUTLET TYPE MAX PSI TEMP GPM MATERIAL
RG5325 3/4" FPT 1/2" FPT L 2900 195° 53 Brass
RG5325K Repair Kit
RG4525 3/4" FPT 1/2" FPT L 2500 195° 45 Brass
RG4525K Repair Kit
GP REGULATORSITEM# INLET OUTLET TYPE MAX PSI TEMP GPM MATERIAL
GP100892 3/8" FPT 1/4" FPT 2000 220° 5 Nickle Plated
GP100998 3/8" FPT 1/2" FPT 1000 190° 13 Stainless Steel
GP100999 3/8” FPT 1/2” FPT 2000 190° 13 Stainless Steel
RG624
Pressure Regulator & Relief ValvesDesigned for single or a multiple pump, weep or multi-nozzle systems. A regulator maintains set system pressure even when only one of several guns or nozzles is performing by-passing the unused flow.
5-10% in by-pass is recommended for optimum performance.
UnloadersSee pages 192–193
Typically designed for a single gun or single pump operation. The unloader will maintain set system pressure with the trigger gun open and goes into by-pass with the release of the trigger.
Not recommended for weep systems.
5-10% in by-pass is recommended for optimum performance.
7595
RG6242
GP100892
GP100998
RG5325
RG4525
GREASEZERK
P U M P S1 9 0 P U M P S
1-877-663-9274fax (662) 655-1234 • sales@carwashsuperstore.com
PR
ESSU
RE
RE
GU
LATO
R &
RE
LIEF V
ALV
ES
GIANT REGULATORSITEM# INLET OUTLET TYPE MAX PSI TEMP GPM MATERIAL
P22105 3/8" FPT 1/2" FPT L 2900 194° 53 Brass
P21905 3/8" FPT 3/8" FPT L 2000 160° 10 Brass
P21905F 3/8" FPT 3/8" FPT T 2000 160° 10 Brass
JE ADAMS BALANCED PRESSURE REGULATORITEM# INLET OUTLET TYPE MAX PSI TEMP GPM MATERIAL
RG7075 3/8" FPT 3/8" FPT L 2000 200° 7 Brass
RG7085 3/8" FPT 3/8" FPT T 2000 200° 7 Brass
RG7075K Repair Kit
SMC BALANCED PRESSURE REGULATORSITEM# INLET OUTLET TYPE MAX PSI TEMP GPM MATERIAL SPRING COLORRG5551090 3/8" FPT 3/8" FPT L 500 180° 7 Brass Blue RG5552690 3/8" FPT 3/8" FPT T 500 180° 7 Brass Blue RG5552590 3/8" FPT 3/8" FPT L 2000 180° 7 Brass Gold RG5552990 3/8" FPT 3/8" FPT T 2000 180° 7 Brass Gold
RG55590K Repair Kit – Quad Ring & Backing Ring Piston Seal Kit – Viton
RG5550590K Repair Kit – Seat & O-Ring Seal Kit – Buna
SPRAYING SYSTEMS CO PRESSURE RELIEF VALVESITEM# INLET OUTLET TYPE MAX PSI TEMP GPM MATERIAL
RES110-3/8-300 3/8" FPT 3/8" FPT 300 Brass
RES110-3/8-700 3/8" FPT 3/8" FPT 700 Brass
RES110-3/8-1000 3/8" FPT 3/8" FPT 1000 Brass
RES8460-1/2-300 1/2" FPT 1/2" FPT 300 Aluminum
RES6815-1/2-300 1/2" FPT 1/2" FPT 300 Brass
RES8460-3/4-300 3/4" FPT 3/4" FPT 300 Aluminum
RES9840-3/4-300 3/4" FPT 3/4" FPT 300 Brass
SUTTNER BY-PASS REGULATOR / BALANCED RELIEF VALVEITEM# INLET OUTLET TYPE MAX PSI TEMP GPM MATERIAL
SUT230 1/4" FPT 1/4" FPT L 3600 200° 8 Brass
RG7075
SUT230
RES110-3/8-300
RES8460-3/4-300
P22105
RG5552590
P U M P S 1 9 1P U M P S
For updated pricing visit
carwashsuperstore.com
UN
LOA
DE
RS
GUZK50
GUZK72
GP® ZK50 SERIES – FLOW SENSITIVE UNLOADERITEM# GPM INLET OUTLET BYPASS MAX PSI TEMP
GUZK50 2.1-3.0
3/8” FPT 3/8” MPT3/4” BSP-M
or1/2” BSP-M
3000 165ºGUZK51 3.0-4.2
GUZK52 4.2-6.6
GUZK53 6.6-10.8
GP® ZK7 SERIES – FLOW SENSITIVE UNLOADERITEM# GPM INLET OUTLET BYPASS MAX PSI TEMP
GUZK70 2.1-3.0
3/8” FPT 3/8” MPT 3/8” FPT 3500 165ºGUZK71 3.0-4.2
GUZK72 4.2-6.6
GUZK73 6.6-10.8
GP® TRAPPED UNLOADER VALVESITEM# COLOR PORTS GPM MAX PSI TEMP
GU21235 Yellow 1/2” FPT 21 2600 200º
GU21405 Green 1/2” FPT 21 4050 200º
GU5221 Brass 1” FPT 53 2450 200º
GU5221GU21405GU21235
GP® UNLOADERITEM# INLET OUTLET PORTS GPM MAX PSI TEMP
GPPULSAR4KHP (2) 3/8” FPT 3/8” FPT (2) 3/8” FPT 10.5 4500 195º
GPPULSAR4KHP-KIT Repair Kit
TOPSELLER
UnloadersTypically designed for a single gun or single pump operation. The unloader will maintain set system pressure with the trigger gun open and goes into by-pass with the release of the trigger.
Not recommended for weep systems.
5-10% in by-pass is recommended for optimum performance.
Pressure Regulator & Relief ValvesSee pages 190–191
Designed for single or a multiple pump, weep or multi-nozzle systems. A regulator maintains set system pressure even when only one of several guns or nozzles is performing by-passing the unused flow.
5-10% in by-pass is recommended for optimum performance.
P U M P S1 9 2 P U M P S
1-877-663-9274fax (662) 655-1234 • sales@carwashsuperstore.com
UN
LOA
DE
RS
GIANT® ADJUSTABLE UNLOADER VALVESITEM# COLOR PORTS GPM MAX PSI TEMP
UL22971C Yellow 3/4” FPT 35.7 1740 158º
P09461 Repair Kit
UL22910 Gray 1/2” FPT 13 800 160º
UL22911 Yellow 1/2” FPT 13 1400 160º
UL22912 Red 1/2” FPT 13 2400 160º
UL22913 Orange 1/2” FPT 13 3000 160º
P12099 Repair Kit
UL22760A
UL22090
GIANT® PRESSURE ACTUATED UNLOADERSITEM# INLET OUTLET BYPASS GPM MAX PSI TEMP
UL22760A 3/8” FPT 3/8” FPT 1/4” FPT 8 3045 160º
UL22090 1” FPT 1” FPT 1” FPT 53 2175 160º
SUTTNER® UNLOADERSITEM# INLET OUTLET BYPASS GPM MAX PSI TEMP
SUT261 3/8” FPT 3/8” FPT 1/4” FPT 8 3625 176º
SUT261-S * 3/8” FPT 3/8” FPT 1/4” FPT 8 3625 176º
SUT280 3/8” FPT 3/8” FPT 1/4” FPT 8 4060 176º
SUT261K Repair Kit
* Includes microswitch
CAT UNLOADER VALVESITEM# INLET / DISCHARGE BYPASS MIN GPM MAX GPM MIN PSI MAX PSI
7581 3/8” MPT 3/8” FPT 0.5 6.5 800 2300
7583 3/8” MPT 3/8” FPT 0.5 8 250 2000
7693 3/8” FPT 3/8” FPT 2.5 10.5 230 2300
7537 1/2” FPT 1/2” FPT 1 21 230 2600
7590 1” FPT 1” FPT 10 52 400 2175
SUT261
7537
P U M P S 1 9 3P U M P S
For updated pricing visit
carwashsuperstore.com
Recommended