View
1
Download
0
Category
Preview:
Citation preview
PUSH-PULL Attachment “Carriage Mounted”
General features• Onlyonehydraulicfunctionrequired
• Onesolidsupportingplateforexcellentstability
• Bolt-onlowerhooks
• Precisionlasercutcomponentsreduceoverallweight
• Tiltingfaceplate(4degrees)compensatesforchamfered
platenforks
• Galvanizedandpowdercoatedcomponents
• Idealforhandlingdouble-stackedloadsorremoving
slipsheetedgoodsfrompallets
• Syntheticmovingpartsreplacetheneedforrollersproviding
greaterdurabilityandlowerlifecyclecost Options• Variouslengthsandsizesavailable
• Quickcouplers
• Quickchangemountinghooks
• Heightadjustablefaceplate
The MSE-FORKS push-pull attachment, model SM, provides the ideal solution for applications which require a lift truck for exclusive pallet-less handling operations.
Carriage Mounted connectionThis type of push/pull attachment mounts directly onto theforkliftcarriage.Thesystemismostappropriateinapplicationswhere all goods are loaded onto slip sheets as opposed topallets. In these situations it is far more cost effective todedicateaforkliftequippedwithacarriagemountedpush-pullattachmentforfulltimeloadingand/oruloadingofcontainersortrailers.Inapplicationsrequiringlessfrequentuse,theoptionofafork-mountedunit,modelSQ,isavailable.
PUSH-PULL Attachment “Carriage Mounted”
ISO 9001-2008Modelforqualityassurance
indesign/development,
production,installationand
servicing.
ISO 4406Hydraulicfluidpower-Fluids
Methodforcodinglevel
ofcontaminationsbysolid
particles.
ISO 3834-2Qualityrequirementsfor
welding.Fusionweldingof
metallicmaterials.
CEEuropeanMachinery
Directives2006/42/EC
Recommendations:Hydraulicflow: 10l/min
Minimumpressure: 160bar
Load push attachmentsALoadPushAttachmentisaheavy-dutyvariationofthestandardunitandisprimarilydesigned
foruseincombinationwithastationarypallet inverterorpalletchanger.It isusedtopush
unitloadswithoutpalletsorslipsheetsintocontainersortrailersinsteadofbulkloadingby
hand,savingatremendous
amount of time and labor
expense.TheLoadPusher
is designed for heavy use
under harsh conditions.
Nonslipsheeted goods
can be pushed into
positionwithconsiderable
force against other
loads in order to create
straight positioning and
optimize space inside sea
containers.
Carriage mounted Push-Pull, one hydraulic function needed
Model Capacity on LC 600 mm (kg)
W1(mm)
W2(mm)
ET(mm)
L2(mm)
L1(mm)
H1(mm)
H2(mm)
CoGh(mm)
ISO/FEM
Weight(kg)
PP-M16-12P-10D1 1600985 1018 187 1380 1200 20 1020 322 II 477PP-M20-12P-10D1 2000W2
W1
W3
H2
H1
L1LLT
CoGH
CoG
V
5°
L2
H2
H1
L1 ET
CoGH
CoG
V
5°
L2
W2
W1
Mou
ntin
gIS
O 2
328
H2
H1
L1 ET
5°
CoGV
CoGV
L2
Recommended