View
63
Download
0
Category
Preview:
Citation preview
496
FLEX
IBLE
MEA
SU
RIN
G G
AG
E
QM-Measure and QM-DataSERIES 198 — Flexible Measuring Gage/Data Processor
The QM-Measure employs a unique “open space” structure tomake workpiece loading/unloading easy. This also allows theshop operator to approach the workpiece without obstruction bythe machine column.In choosing this unique structure, Mitutoyo has determined theQM-Measure’s body design through the FEM (Finite-ElementMethod) analysis so that the machine deformation during probingis minimized and evened. The optimized machine design achievesa competent measuring accuracy of (3.0+4L/1000)µm and verysmooth probing with minimum operation fatigue.
If the QM-Measure is required toevaluate the workpiece dimensionat 20°C temperature, and shop orworkpiece temperatures are not at20°C, an optional TemperatureCompensation System can beinstalled. It can expand theoperation temperature range to15°C - 30°C.
OPTIONAL ACCESSORIES06ABQ040A: Ceramic master ball06AAY484: Machine stand (table top H=750mm)06AAX288: Machine stand (table top H=650mm)06AAX763: Granite sub-plate for QM-Measure 33306AAX917: Granite sub-plate for QM-Measure 35306AAD671: Clamping unit06AAY251: Fine feeding device (10mm/.4” stroke)937179T: Foot switch06AAX263: Floppy disk drive06AAX265: Printer (120V)06AAX266: Printer (230V)908353: Printer paper (5 rolls)——: Temperature compensation system
SPECIFICATIONSModel No. QM-Measure 333 QM-Measure 353Measuring X-axis 300mm (12”) 300mm (12”)range Y-axis 300mm (12”) 500mm (20”)
Z-axis 300mm (12”) 300mm (12”)Length standard Precision linear encoderResolution 0.0005mm (.00002”)Accuracy (20°C±1°C)* E = (3.0+4L/1000)µm, R = 4.0µm (.00016”)Guide method Air bearing for each axisClamping method Clamping screwFine feeding device Optional (10mm/.4” stroke)Z-axis balance CounterweightMeasuring table Optional (aluminum or granite sub-plate)Machine stand OptionalWorkpiece loading Maximum height: 410mm (16.14”)
Maximum mass: 30kg (66 lbs.)Air pressure 0.35MPa or 51PSIAir consumption 50L/min. (in normal state) or 1.8CFMMass** QM-Measure 130kg (286 lbs.) 170kg (374 lbs.)
QM-Data 1.2kg (2.6 lbs.) 1.2kg (2.6 lbs.)* ISO 10360-2
E: Error of indication of volumetric length measurementL: Measuring length (mm)R: Probing error (with TP2 touch signal probe)
**Excluding the optional machine stand.
Dimensions
825
X Z11
0
950
333:
134
535
3: 1
360
650
280
900200 90
333: 690353: 890
Y
Unit: mm
QM-Data
QM-Data
QM-Measure
1: Fine feeding device2: Temperature compensation unit3: Sub-plate4: Machine stand
333: 245353: 345
485
2
1 1
3
4
333:
840
353:
860
85
497
FLEX
IBLE
MEA
SU
RIN
G G
AG
E
Simple measurement
Standard measurement
Advanced measurement
Mitutoyo “AI” FunctionFurthermore when using “AI” function, even the geometricfeature selection can be skipped. The QM-Data identifies from theinput data what geometric feature is measured, then shows thegraphic display and calculates the dimensions automatically. Thisallows the operator to continue the measurement withoutinterruption using key-stroke.
Interactive Graphic DisplayAfter the geometric element is selected, the QM-Data draws agraphic of the feature on the LCD panel including number ofinput points and position to berequired. This allows the operatorto perform the measurement withaccurate data collection.
The last input point is measured, the QM-Data immediately showsthe measurement result.
Multiple Language SupportThe operation language is available in English, Japanese, German,French, Italian, Spanish,Portuguese.
For Advanced MeasurementIn addition to the Gage-like measurement menus the QM-Dataprovides experienced operatorswith advanced functions equal toa standard CMM software.
Enlarged display mode: Simpleindication of XYZ probe position
Coordinate System Customization for Experienced OperatorsIf the 3D coordinate system automatically generated in the Gage-likemeasurement is not suitable for yourworkpiece, the QM-Data offers theoperator a choice of twelve additionalcoordinate system setup patterns.
Intuitive Icons* for Gage-like MeasurementThe QM-Data operates as a “Gage-like” instrument. Instead ofthe troublesome data entry by computer keyboard or pull-downmenu selection, the QM-Data provides 5 “Gage-likemeasurement” menu displays including 43 1D/2D/3D geometricelement icons.Just press the representative function key of the element icon tobe measured, and then touch a workpiece feature with a touchtrigger probe. The QM-Data immediately calculates the measuredgeometry and displays the resulton the large LCD panel. The shopoperator can ignore thecomplicated 3D coordinate systemsetup during the measurement.
*The copyright of the software and icons used are owned by Mitutoyo Corporation.
Recommended