View
260
Download
15
Category
Tags:
Preview:
DESCRIPTION
Qulbix Catalog
Citation preview
QULBIX CATALOG 2014
version 1
PAGE 1/30
4 X M6x12 BOLT
4 X M6 WASHER
MOTO SEAT
MOTO
SUBFRAMESEAT
5 riding configurations in 1 frame. Narrows the gap between motorcycles and bicycles.
Compatible with most high power hub motors on the market.
Compatible with standard bicycle components.
Large battery compartment enables high power battery pack installation.
Enclosed shell shaped frame offers best protection for the battery and extreme rigidity for off-road riding.
KEY ADVANTAGES:
QULBIX
Raptor 140 - Performance Electric Frame Kit
PAGE 2/30
OITP N
O
#3
#1
TIK EMARF ELC
YCI
B OITP N
O
#2
MOTO
FRAM
E K
IT
QULBIX RAPTOR 140FRAME KIT
5 OPTIONS IN 1 KIT
SH Y IEL LL DEK HTIW TI
K E
MA
RF EL
CY CI B
O FRT AO MM E KIT WITH
KELLY
SHIELD
O FT RAO MM E KIT WITH
FOO
T PEGS
BEST FOR: tracks, dirt trails; MX riding style; different cornering due to
fixed foot pegs position;
OITP N
O
#4
OITP N
O
#5
BEST FOR: tracks, dirt trails; MX riding style; increasing range by
pedaling.
BEST FOR: max. range; bicycle riding
style; workout;
PAGE 3/30
NEW GEOMETRY FEATURES: more ; padaling clearance larger (due to steering angle
narrower frame); larger inner ; battery volume larger battery box opening
(can store 200 x 300 x 140mm single pack battery).
NEW FEATURES: optional MX style ; foldable foot pegs only 2 precut holes for on on/off
switch, and XLR charger socket (rubber sealed);
optional single speed or high speed drive (Schlumpf).
READ MORE ON RAPTOR 140 AT .WWW.QULBIX.COM
NEW FRAME MATERIALS: high tensile strength aluminum super strong (tensile strength construction steel
1200N/mm2, stronger than CrMo steel).
NEW FRAME WEIGHT: by 20-25%lighter
NEW FRAME WIDTH: by 25mmnarrower
Raptor 140 Frame Kit. What’s New Compared to Previous Model?
PAGE 4/30
TIK EM
IB
ARF ELC
YC
#1
It is intended for those who want to take full advantage of optimal seat height for best pedaling performance. The kit is compatible with standard high performance bicycle
components.
The Raptor’s rear shock frame bracket enables three different heights (three holes) for different shock lengths/stroke variations. This allows you to use different shock configurations and adjust the suspension to perfection. In addition, the swing arm has two holes positions for two different rear wheel travel options.
Large inside-the-frame battery compartment can store a large capacity battery for greater performance. High tensile steel with aluminum side plates
makes the frame rigid and stable during intense riding.
The frame has an integrated controller key switch, XLR rubber sealed charging socket, and a display mount hole with a rubber seal.
The Qulbix Raptor Bicycle Frame Kit includes a bolt-on bicycle seat sub frame which can later be easily swapped with the moto seat sub frame.
The controller shield protects bike’s electronics and allows air to flow through freely. Power cables exit the battery compartment through the rubber sealed hole. That way the water stays well away from the batteries.
Standard side (or central) stand bracket will keep the bike standing up while you park it.
OITP N
O
#3
ICB YCLE FRAM
E K
IT WITH
KELLY SHD ILE
Qulbix Raptor 140 Controller Shield Dimensions
Price:
1.090,00 €without VAT or shipping cost
Price:
1.115,00 €without VAT or shipping cost
QULBIX RAPTOR 140
Bicycle Frame Kit with standard (OPTION #1) or larger shield (OPTION #3)
QULBIX Raptor 140
Frame Set
QULBIX Raptor 140 Bicycle Seat Subframe Set
QULBIX
CLAMPING DROPOUT BOLTS& WASHERS
SWING ARMBEARING SET
QULBIX Raptor 140
Swing Arm Set (150mm or 165mm
DROPOUT OPTIONS)
RAPTOR 140 FRAME BASE
BATTERY MOUNTING SET
RAPTOR 140 REAR SHOCK FRAME MOUNTING SET
RAPTOR 140 FRAME SIDEPLATES SET
KEY SWITCH
XLR CHARGING ADAPTER SET
RAPTOR 140 FRAME STICKERS
QULBIX Raptor 140 Controller Shield Set
RAPTOR140 BICYCLE
FRAME KITOITP N
O#1
RAPTOR 140 SWING ARM
RUBBERSEAL D35
BRAKE CALIPER BRACKET
REAR SHOCK MOUNTING MATERIAL
R
QULBIX Raptor 140
Frame Set
QULBIX Raptor 140 Bicycle Seat Subframe Set
QULBIX
CLAMPING DROPOUT BOLTS& WASHERS
SWING ARMBEARING SET
QULBIX Raptor 140
Swing Arm Set (150mm or 165mm
DROPOUT OPTIONS)
RAPTOR 140 FRAME BASE
BATTERY MOUNTINGSET
RAPTOR 140 REAR SHOCK FRAME MOUNTING SET
RAPTOR 140 FRAME SIDEPLATES SET
KEY SWITCH
XLR CHARGING ADAPTER SET
RAPTOR 140 FRAME STICKERS
QULBIX Raptor 140 Kelly Controller Shield Set
RAPTOR140 BICYCLE
FRAME KITwith
SHIELD
OITP N
O
#3
RAPTOR 140 SWING ARM
RUBBERSEAL D35
BRAKE CALIPER BRACKET
REAR SHOCK MOUNTING MATERIAL
KELLY
OITP N
O
#3
What is included in frame kit OPTIONS #1 and #3?
PAGE 6/30
R
CHOOSE BICYCLE KIT IF you’re looking for optimal seat height settings for best pedaling performance.
The motorcycle seat’s main advantages are the larger sitting area and a very distinctive look. The „moto“ seat allows you to precisely position your body weight when cornering and ensures you have a comfortable ride. Quality made super strong construction steel and aluminum frame feels like you are riding a motorbike. The kit is compatible with standard high performance bicycle components.
The Raptor 140’s rear shock frame bracket enables three different heights (three holes) for different shock lengths/stroke variations. This allows you to use different shock configurations and adjust the suspension to perfection. In addition, the swing arm has two holes positions for two different rear wheel travel options.
Large inside-the-frame battery compartment can store a large capacity battery for greater performance. High tensile steel with aluminum side plates makes the frame rigid and stable during intense riding.
The frame has an integrated controller key switch, XLR rubber sealed charging socket, and a display mount hole with a rubber seal.
The Qulbix Raptor Moto Frame Kit includes a bolt-on moto seat sub frame (and the seat) which can later be easily swapped with bicycle seat sub frame.
The controller shield protects bike’s e l ectronics and allows air to flow through f reely. Power
cables exit the b a t t e r y
compartment through the rubber sealed hole. That way the water stays well away from the batteries.
Price:
1.185,00 €without VAT or shipping cost
OITP N
O
#2OITP N
O
#4
FO RT AO MM E KIT WIT
SHIELD
H K
ELLY
FRO AT MO EM KIT
OITP N
O
#5
O T FO RAM M
E KIT W
ITH
OO
T PEGS
F
Price:
1.160,00 €without VAT or shipping cost
PAGE 9/30
QULBIX RAPTOR 140
Moto Frame Kit
QULBIX Raptor 140
Frame Set
QULBIX Raptor 140 Raptor Moto Seat and Subframe Set
QULBIX
BRAKE CALIPER BRACKET
REAR SHOCK MOUNTING MATERIAL
CLAMPING DROPOUT BOLTS& WASHERS
SWING ARMBEARING SET
QULBIXRaptor 140
Swing Arm Set (150mm or 165mm
DROPOUT OPTIONS)
RAPTOR 140 FRAME BASE
BATTERYMOUNTINGSET
RAPTOR 140 REAR SHOCK FRAME MOUNTING SET
RAPTOR 140 FRAME SIDEPLATES SET
KEYSWITCH
XLR CHARGING ADAPTER SET
RAPTOR 140 FRAME STICKERS
QULBIX Raptor 140 Controller Shield Set
RAPTOR140 MOTOFRAME KIT
RAPTOR 140 MOTO SUBFRAME SET
RAPTOR 140 MOTO SEAT SET
OITP N
O
#2
RAPTOR 140 SWING ARM
RUBBERSEAL D35
R
QULBIXRaptor 140
Frame Set
QULBIX Raptor 140 Raptor Moto Seat and Subframe Set
QULBIX
CLAMPING DROPOUT BOLTS& WASHERS
SWING ARMBEARING SET
RAPTOR 140 FRAME BASE
BATTERY MOUNTING SET
RAPTOR 140 REAR SHOCK FRAME MOUNTING SET
RAPTOR 140 FRAME SIDEPLATES SET
KEY SWITCH
XLR CHARGING ADAPTER SET
RAPTOR 140 FRAME STICKERS
RAPTOR140 MOTO
FRAME KIT
QULBIX Raptor 140 Kelly Controller Shield Set
with KELLY SHIELD
OITP N
O
#4
RAPTOR 140 MOTO SUBFRAME SET
RAPTOR 140 MOTO SEAT SET
RAPTOR 140 SWING ARM
RUBBERSEAL D35
BRAKE CALIPER BRACKET
REAR SHOCK MOUNTING MATERIAL
R
What is included in frame kit OPTIONS #2 and #4?
PAGE 10/30
QULBIXRaptor 140
Swing Arm Set (150mm or 165mm
DROPOUT OPTIONS)
QULBIX Raptor 140
Frame Set
QULBIX Raptor 140 Raptor Moto Seat Subframe Set
QULBIX
RAPTOR 140 SWING ARM
SWING ARMBEARING SET
QULBIXRaptor 140
Swing Arm Set (150mm or 165mm
DROPOUT OPTIONS)
RAPTOR 140 FRAME BASE
BATTERY MOUNTING SET
RAPTOR 140 REAR SHOCK FRAME MOUNTING SET
RAPTOR 140 FRAME SIDEPLATES SET
XLR CHARGING ADAPTER SET
RAPTOR 140 FRAME STICKERS
QULBIX Raptor 140 Controller Shield Set
RAPTOR140 MOTO
FRAME KIT OITP N
O
#5withFOOTPEGS
RAPTOR 140 MOTO SUBFRAME SET
RAPTOR 140 MOTO SEAT SET
KEY SWITCH
RUBBERSEAL D35
CLAMPING DROPOUT BOLTS& WASHERS
BRAKE CALIPER BRACKET
REAR SHOCK MOUNTING MATERIAL
R
What is included in frame kit OPTION #5?
PAGE 11/30
QULBIX Raptor 140 Footpegs Set
Rear Shock Dimensions
Compatible rear shock length & stroke: (267x89 / 240x76 / 222x70 / 216x63 mm). See table below.
Rear Brake Rear brake adapter is included in the kit and is suitable for 200/203 mm rotor and standard brake calipers (for example: Avid Code, Elixir). Two mounting bolts and washers also included.
Key lock Frame integrated key-lock for controller on/off.
Charger Integrated XLR charger socket with rubber cap.
Battery Compartment
Inside frame width: 140 mm, max. opening height: 240 mm, max. battery pack size: 300 x 200 mm. For more info check drawing above.
Derailleur M10x1 threaded hole for standard derailleur installation.
Seat For bicycle seat post diameter 30,9 mm.
Side stand Standard bicycle side/central stand.
Controller Shield Aluminum controller shield with large ventilation holes. Larger (Kelly) controller shield also available. For more info check the product catalog tab.
Weight and material 10,1 kg; frame material: super strong construction steel (tensile strength 1200N/mm2, stronger than CrMo steel); frame side plates: high tensile strength aluminum.
Color options - stickers
White, yellow, orange, red, green or blue. For more info on colors check the gallery tab.
Headset Bearings Suitable for semi integrated 1 1/8'' headset bearing (bearings are not included in the kit.)
Bottom Bracket Suitable for BB shell width 83 mm, BSA (English) thread 1 3/8'' Left/Right (BB is not included in the kit).
Dropout
Clamping type, maximum bolt size: M16, 10 mm slot. Swing arm dropout: 165 mm. Compatible with: Cromotor 155 mm size, spacers come with the motor. Crystalyte The Crown 140 mm, ask for additional spacers – 7 speed free wheel can be installed.
QULBIX RAPTOR 140 FRAME KIT
Specifications
PAGE 12/30
„Bike is incredible and the motorcycle seat makes it much easier to drive fast off-road and corner at speed.
I tend to sit down and get low when traveling fast off-road. It just feels more secure and stable doing that, something that I wouldn't do with a bicycle seat. I of course stand when I drive on very rough terrain or about to hit a curb. The Raptor brings Ebiking to a whole new level.
You can do so much more compared to a converted bicycle ebike. I started to climb stairs and drive down them now where ever I find them.“
Cutomer’s Nickname: Offroader, Endless Sphere Forum (largest ebike on-line forum)
CHOOSE MOTO KIT IFyou prefer:
tracks, dirt trails; MX riding style;
different cornering due to fixed foot pegs position;
QULBIX RAPTOR 140 FRAME KIT
Frame Geometry
PAGE 15/30
Dimensions in the table below are based on front wheel size: 26''; rear wheel size: 26''; standard 200/180 mm travel front fork, with crown-axle distance 565 +/-5 mm.
DROPOUT
RWD
FWD
BSH
WB
HTA
BBH
RWT
DROPOUT
RWD
FWD
MSH
WB
HTA
BBHRWT
List of abbreviations:
BBH = Bottom bracket height;
BSH = Bicycle seat height;
MSH = Moto seat height;
HTA = Head tube angle;
WB = Wheel base;
RWT = Rear wheel travel;
FWT = Front wheel
travel;
HTL = Head tube lenght
(150 mm);
SPD = Seat post diameter/seat
tube inner diameter (30,8 mm);
STOD = Seat tube outside diameter (35 mm);
BBW = Bottom bracket width (83 mm);
MTW = Maximum tyre width (90 mm; based on 26''
wheel);
HTID = Head tube inside
diameter (44 mm);
SBL = Shock bushing length (40
mm);
SL = Eye to eye shock
lenght;
PAGE 16/30
FRAME BRACKED ORIENTATION
OPTION #2: „ROTATED“
FRAME BRACKED ORIENTATION
OPTION #1: „STANDARD“
SBL (M8)
HIGHLOW
HIGH
(M8)
REAR SHOCK POSITION
SHOCK SWING ARM POSITION
MIDDLE
LOW
MTW
SL
SBL
CLAMPINGDROPOUTS
M10x1 DERAILLEURor CHAIN TENSIONERMOUNT
10 mm(M14/M16)
DROPOUT
KEYSWITCH(CONTROLLER)
STOD
SPD
XLR FEMALE CHARGING CONNECTOR WITH RUBBER SEAL
SEMI INTEGRATEDHEAD SET BEARING
44 mmHTID
HTID
HTL
ENGLISH THREAD 1 3/8'’24 TPI (LEFT/RIGHT)
BBW
PAGE 17/30
PAGE 18/30
QULBIX RAPTOR 140 FRAME KIT
Other Wheel Options
„I’ll be back before they know it.“
r Moms.of elcihev yawateg tseB
QULBIX RAPTOR 140 FRAME KIT
Battery Box Specifications
BATTERY BOX OPENING AND
MAXIMUM BATTERY PACK SIZE
PAGE 20/30
performance electric bikes
QULBIX RAPTOR 140 FRAME KIT
Electric Motor Compatibility
5x2mm M14
Qulbix Raptor 140 Frame Kits are compatible with most of the hub electric motors on the market (Cromotor, The Crown, Crystlayte H40).
Example: QULBIX RAPTOR 140 is compatible with CROMOTOR. Choose 165mm dropout and Motor Spacer Set #1.
Read more about electric motor compatibility on our website.
PAGE 21/30
QULBIX RAPTOR 140 FRAME KIT
Other Products
Price:
15,00 €without VAT or shipping cost
Price:
30,00 €without VAT
or shipping cost
REAR SHOCK MOUNT KIT
MOTOR SPACER SET #1You need this product if you are using the Cromotor with your 165mm dropout Qulbix Raptor Frame; and if you are using the Crystalyte Crown Series with your 150 mm dropout Qulbix Raptor Frame;
Price:
20,00 €without VAT
or shipping cost
MOTOR SPACER SET #2You need this product ifyou are using the Crystalyte Crown Series with your 165mm
dropout Raptor Frame.
Price:
20,00 €without VAT or shipping cost
MOTOR SPACER SET #3You need this product if:you are using the Crystalyte H40 Series with your 150 mm dropout Qulbix Raptor Frame; you are using the Crystalyte H35 Series with your 150 mm dropout Qulbix Raptor Frame;
Price:
15,00 €without VAT
or shipping cost
DROPOUT REINFORCEMENTSSwing arm dropout 10mm reinforcements
for riding with high power electric motors (6kW+) with weaker axis.
PAGE 24/30
Price:
645,00 €without VAT or shipping cost
SCHLUMPF HSDSchlumpf High Spreed-Drive Chainring 27 t. h-s-d (83 mm BB) is compatible with the Qulbix Raptor. Included:- High Speed Drive with longer axle,- Chainring 27 t. h-s-d,- Crankarms 160mm black x 2,- Lube 5ml MoS2,- Surcharge for axle special lenght. For Q-factor and other dimensions check our website.Please specify in your order that you wish to use the Schlumpf High Speed Drive, so the bottom bracket chamfering can be done to your Raptor frame. You can also do it yourself, if you prefer.
Manufacturer: Haberstock-Mobility GmbH
All Frame Kit spare parts avaialble seperatly. For more info check our web
catalog o at .www.qulbix.com
PAGE 25/30
PAGE 28/30
QULBIX RAPTOR PRODUCTS
Coming Soon...
SISSAHC
GNILL
OR
TEE L BP IKM E O KIC TS
Qulbix Raptor 140 Frame Kit
Forks, Brakes, Rear Shock, Pedals, Wheels, etc. except: Battery,
Charger & Controller.
Qulbix Raptor 140 Complete Bikes
Complete Turn-Key Electric Bike.
Qulbix Electric Bikes And Frame Kits.Unique As Each Rider.
PAGE 26/30
performance electric bikes
Interested? Let us know at .info@qulbix.com
performance electric bikes
PAGE 27/30
QULBIX RAPTOR 140 DEALERS
Become Our Dealer!
Qulbix Raptor Frame Kits are shipped out all over the world - Europe, Australia, US, Russian Federation, United Arab Emirates, South America, Hongkong, etc.
Become our dealer, become an important part of our story!
Contact us at or visit our webiste .info@qulbix.com www.qulbix.com
performance electric bikes
performance electric bikesPAGE 28/30
PRODUCT LIABILITY:Qulbix Frame Kits And Electric Bikes are made for off-road use only. Assembly should be done according to instructions stated in Assembly Manual and elsewhere (Qulbix Website: www.qulbix.com). Qulbix (Ulbi d.o.o.) cannot take responsibility for poorly assembled kits. Please read other legal notes at our website.
Always ride safely, taking care of yourself and others!And ... do not forget to have fun.
www.qulbix.cominfo@qulbix.comwww.facebook/Qulbixwww.twitter.com/@Qulbix
performance electric bikes
Recommended