R GEARSSPUR GEAR-20 PITCH — 3/8" Face Width 20o Pressure Angle Pin Hub —3/8" Bore SPUR...

DESIGN

Phone: 800-243-6125 ■ FAX: 203-758-8271E-Mail: info@pic-design.com

Whether the application is to transfer motion ortransmit power, PIC Design has the complete rangeof gearing needed to fulfill any applicationrequirement. Standard gears and assemblies areavailable for operation on parallel and right-angleshafts, linear motion applications can also besatisfied.

PIC Design Gears — A Brief Overview

Spur GearsDesigned and manufactured to mount onparallel shafts. Available in (inch)Diametral Pitch and (metric) Modules.

Miter & Bevel GearsDesigned and manufactured to operate onintersecting shafts positioned at a right angle.

Spiral GearsDesigned to operate at right angles with the

DESIGN

RECISIONNDUSTRIALOMPONENTS

pinion able to be mounted to mesh with anypart of the 360o of the gear.

Cluster GearsSpur gears manufactured to be mounted ona shaft and another gear to be mounted onthe cluster for use in multiple gear ratios ina gear box.

Helical GearsDesigned with a 45o Helix angle to operateon parallel or right angle shafts.

Anti-Backlash GearsTwo independent gears mounted to samehub with a spring between the twoproviding a constant full-tooth engage-ment with the mating spur gear, therebyeliminating backlash in the mesh. Availablein Spur, Worm and Miter Gears.

DifferentialUsed in application with one input shaftdriving two output shafts at right anglesto the input.

Worm & Worm WheelsHigh ratios attainable in a single reduc-tion with shafts at right angles to eachother in limited space.

Pinion ShaftsDesigned to be either supported bybearings or pressed into hollow shaft tooperate with spur gear mounted onparallel shaft.

RacksA gear with the teeth in a straight line,which produces linear motion whenmeshed with a circular spur gear.

DESIGN

TECHNICAL SECTIONTooth Proportions and Formulas for Spur Gears

TOOTH-TO-TOOTH AND TOTAL COMPOSITE TOLERANCEAGMA Standards for Inch, DIN Standards for Metric

DESIGN

Phone: 800-243-6125 ■ FAX: 203-758-8271E-Mail: info@pic-design.com 12-3

TECHNICAL SECTIONTable of Pitch Diameters

DESIGN

SPUR GEAR INDEX

For Cut Nylon and Delrin, See Pages 12-26 through 12-30.

12-5412-56

12-5512-56

12-5512-57

12-5712-59

12-5812-59

12-6112-62

12-6312-64

DESIGN

SPUR GEAR-20 PITCH — 3/8" Face Width ■■■■■ 20o Pressure Angle

Pin Hub — 3/8" Bore

SPUR GEAR 1/10th CIR. PITCH — 3/16" Face Width ■■■■■ 20o Pressure Angle

SPUR GEAR 1/10th CIR. PITCH — 1/4" Face Width ■■■■■ 20o Pressure Angle

AGMA Quality No. 13 ■■■■■ Pin Hub — 1/4" Bore

DESIGN

Pin Hub — 3/16", 1/4" Bores

DESIGN

Split Hub - 1/4" Bores — Hubless 3/8" Bore

For Gear Hubs See Pages 12-65 & 12-66

DESIGN

Split Hub - 1/4" Bores — Hubless 3/8" Bore

DESIGN

Pin Hub — 1/8", 3/16", 1/4" Bores

DESIGN

Split Hub — 1/8", 3/16", 1/4" Bores ■■■■■ Hubless 3/8" Bore

DESIGN

Pin Hub — 1/8", 3/16", 1/4" Bores

DESIGN

G17-30G17-32G17-34 G18-34

DESIGN

Split Hub — 1/8", 3/16", 1/4" Bores ■■■■■ Hubless 3/8" Bore

H49-22

H49-25H49-26

H49-23H49-24

DESIGN

Split Hub — 3/16", 1/4" Bores ■■■■■ Hubless 3/8" Bore

DESIGN

Pin Hub — 1/8", 3/16" Bores ■■■■■ Hubless 3/8" Bore

DESIGN

SPUR GEAR-96 PITCH — 1/16", 3/32", 1/8" Face Width ■■■■■ 20o Pressure Angle

DESIGN

Split Hub — 1/8" Bore

SPUR GEAR-96 PITCH — 1/16" , 1/8" Face Width ■■■■■ 20o Pressure Angle

Hubless — 3/8" Bore

DESIGN

SPUR GEAR-120 PITCH — 1/16", 3/32", 1/8" Face Width ■■■■■ 20o Pressure Angle

Pin Hub — 1/8" Bore ■■■■■ Hubless 3/8" Bore

R GEARSSPUR GEAR-20 PITCH — 3/8" Face Width 20o Pressure Angle Pin Hub —3/8" Bore SPUR...

Documents

Spur Investment

Spur Steak Ranches International | Spur

[1] involuteΣiii(spur and helical gear design system)Spur...1 [1] involuteΣiii(spur and helical gear design system) 図1.1 involuteΣiii(spur and helical) 1.1 概要 involuteΣⅲ(spur

SPUR GEARS - farnell.com · SPUR GEARS - ACETAL Order Code N (teeth) Overall Dia da Pitch Dia d Hub Dia ND O/A Length LE c Bore B Torque (Ncm) Weight (g) • Injection moulded •

EFF: Exh%20O%20-%20mobilisa

Bore No. 15 SOIL BORE LOG

Borematic Inside Micrometers Bore Gages · Bore Gages Bore Gages C-20-26,28 ABSOLUTE Digimatic Bore Gage C-27 Bore Gage Zero Checker C-29 Setting Rings C-29,30 Bore Gages C-28 Bore

Apo ton 20o ston 21o Aiona - Panagiotes Kondules.pdf

Spur Gear1 -1541 1 -1542 Spur Gear Pressure Angle 20 , Module 1.0, Shaft Bore Configurable Type QStandard Type and Thin Type are available. eFor products uncovered by the e-Catalog

SERIES 400 FULL BORE & REDUCED BORE

20o Boletin Andes

32%20o%27shaughnessy%20fs%20 %20low%20res

20o MobileMonday SP: Mobile Games

Crea pyright 20o · Crea pyright 20o Co ... he led MetricStream’s financial strategy as well as sales, marketing, and partnerships. He also

GEARS spur metric.pdf · DIN 3963, DIN 867, quality 9gS”. Bore tolerances to BS 4500: 1969, H8. General tolerance unless otherwise stated ± 0.25. These gears are not hardened

Rapport%20 skyddet%20mot%20oegentligheter%20fn%20sn%20o%20rs

Como%20 melhorar%20o%20ensino%20do%20evangelho 35667

Furrer -Spur

KBSS KBSS Spur Gears Brass Spur Gears - SDP/SI (171).pdf · JIS grade N8 (JIS B1702-1: 1998)* Gea: r teeth: Standard full: ... e class is H8. If the bore diameter is φ5 or φ6, and

Evers 10%20zgodb%20o%20kajenju300dpi