View
250
Download
4
Category
Preview:
Citation preview
Raccords à bride hydraulique
Petrometalic SA32 rue de l’Ermitage78000 VERSAILLES
www.petrometalic.comnegoceversailles@petrometalic.comnegocecambrai@petrometalic.com
Solutions de régulation des fluides
2
SOMMAIRETABLE OF CONTENTS
COMMENT COMMANDER /HOW TO ORDER
BRIDES /FLANGES ISO 6162-1 (SAE 3000)
BRIDES /FLANGES ISO 6162-2 (SAE 6000)
BRIDES /FLANGES ISO 6164-1 (PN 250 - CETOP)
BRIDES /FLANGES ISO 6164-2 (PN 400 - CETOP)
BLOCS /BLOCKS ISO 6162-1 (SAE 3000)
BLOCS /BLOCKS ISO 6162-2 (SAE 6000)
BLOCS /BLOCKS ISO 6164-1 (PN 250 - CETOP)
BLOCS /BLOCKS ISO 6164-2 (PN 400 - CETOP)
CARACTERISTIQUES TECHNIQUES DES CONNECTEURS A BRIDES /FLANGED CONNECTIONS TECHNICAL SPECIFICATIONS
COMPOSANTS COMMUNS ISO 6162-1 (SAE 3000) ISO 6164-1 (PN 250 - CETOP) /COMMON COMPONENTS
COMPOSANTS COMMUNS ISO 6162-2 (SAE 6000) ISO 6164-2 (PN 400 - CETOP) /COMMON COMPONENTS
Les modèles et références présentés dans cette documentation ne constituent pas un document
Models and references included in this documentation are not contractual and we reserve the right to change them at any time,further to technical improvements.
3 à 5
6
7 à 18
21 à 30
33 à 40
43 à 49
19 à 20
31 à 32
41 à 42
49 à 50
51 à 56
57 à 60
PAGES
3
CARACTERISTIQUESTECHNIQUES DESCONNECTEURS
A BRIDES/FLANGED CONNECTIONSTECHNICAL SPECIFICATIONS
- Brides et 1/2 brides de raccordement ISO 6162 (SAE 3000/6000) Ø 1/2" à 3" AF.60.C40Ø 1/2" to 3"
- Brides et 1/2 brides de raccordement ISO 6162 (SAE 3000) ØØ
81 CX)0003 EAS( 1-2616 OSI - "V" epyt ,WS stuobme sedirB -- Flanges with SW ends, "V" type ISO 6162-1 (SAE 3000)
- Brides taraudé 1H 83 CX)3B .gif( sdradnats suoT - se
1H 83 CXsdradnats suoT - senielp sedirB -
1H 83 CXsdradnats suoT - stnemedroccar ed scolB -- Connecting blocks - all standards
- Brides carré
- Collets à souder Butt Welding Integral ou Ré 3.42 E tiud- Flanged head BW or Reducing Flanged head BW
- Adapteur Socket Welding, Collet é à C5) - Tous standards E 24.3- Adapters, blank Flanged head.
é 3.42 Esdradnats suoT - s- Treaded Flanged head - all Standards
3.42 Esdradnats suoT - sruetarutbO -- Plugs - all Standards
TIART REICA219.NID - 521-52 - E FN emron tnavius CHC siV - É(classe 12.9)- SCREWS, CHC, To Standard NF E - 25-125 - DIN.912
TIART REICA3-81 B ISNA emron tnavius CNU siV - É(classe 12.9)- SCREWS, UNC To Standard ANSI B 18-3
- Joints standards (voir paragraphe Etanchéité) Joint CARRÉ FLS - Viton 90 shore - Perbunan 90 shore- Standard gaskets (see seals section) Square "o" ring FLS - Viton 90 shore - Buna 90 shore
- Ces matières sont données à titre indicatif, nous nous réservons la possibilité de les remplacer par des matières ayant des caractéristiques mécaniques équivalentes. Nous pouvons réaliser ces différentes pièces en tout autre matière sur demande (inox, cupro - alliage etc…)
alloys, etc…)
- Socket Welding Integral type "C", Socket Welding réduit type "D" E 24.3
AFNOR EN.10027-2
XC 48 H1
1.1181
1.1151
1.1181
1.1181
1.11811.1191
1.1181
1.0114
1.0114
1.0114
1.0114
1.0114- Flanged head integral Socket Welding type "C", Reducing Flanged head Socket Welding type "D"
MATIERE /MATERIALS
- Brides : faces extérieures brutesface interne Ra = 6,3Alésage Ra = 6,3
érieurs Ra= 6,3Passage Ra = 3,2Porté
- Flanges : unmachined external facesInternal faces Ra = 6,3Bores Ra = 6,3
Bores Ra = 3,2Gasket faces and seal grooves
USINAGE - ETAT DE SURFACE /MACHINING - SURFACE FINISHES
1,6
0 à
5°
1,6
1,6
4
(donné à titre indicatif) VIS CHC CLASSE 12,9VIS UNC CLASSE 12,9
SCREWS CHC CL. 12,9SCREWS UNC CL. 12,9
(for information only)
COUPLES DE SERRAGE VISSERIE
SCREW TIGHTENING TORQUES
COUPLES DE SERRAGE VISSERIE SCREW TIGHTENING TORQUES
M6M8
M10
M12
M14
M16
M18M20
M22M24
M27M30
1,12,8
5,4
10,3
14,9
23,0
32,045,0
61,077,0
110,0151,0
3/8"1/2"
3/4"1"-1"1/4
1"1/4-1"1/22"-2"1/2
1"1/22"
2"1/23"-3"1/2
4"
1/2"
3/4"
1"1"1/41"1/4
1"1/2
2"
1/2"
3/4"-1"
1"1/4
1"1/22"
2"1/23"-3"1/2
4"
1/2"
3/4"
1"
1"1/4
1"1/2
2"
3/8"1/2"3/4"
1"
1"1/4
1"1/2
2"1"1/2
2"1/23"
3/8"1/2"3/4"
1"
1"1/4
1"1/2
1"1/2-2"
2"1/2-3"3"1/2
3"3"1/24"
4"
3/8"1/2"3/4"
1"
1"1/4
1"1/2
2"1"1/2
2"1/23"
3"1/24"
4"
1/2"3/4"
1"
1"1/41"1/2
2"
2"1/2
3"
4"
5/16"-18
3/8"-16
7/16"-14
1/2"-13
5/8"-11
3/4"-10
2,5
4,4
6,6
10,0
20,0
30,0
SCREWS
VIS METRIQUEØ VISmétrique
RECTANGULAR
"RECTANGULAIRE"SAE 30006162-1
SCREWS
VIS UNC STANDARDS
SQUARE
STANDARDS "CARRÉ"PN 2506164-1
PN 4006164-2
CETOP "S"SAE 60006162-2
COUPLE MAXImda N
Ø VISUNC
COUPLE MAXImda N
SAE 30006162-1
SAE 60006162-2
STANDARDS NORMALISATIONS
Standard "Rectangulaire"
Flanged head connectioncollets à souder
All standards/Tous standards
"Rectangular" Standards
PN250 - PN400
SAE 3000 (PN 250)/SAE 6000 (PN 400)
H36 PR noitadnammocerPOTEC
SAE J - 518 C, ISO/6162 (1985)NFE 48 055, ISO/6162-1 (1998)(1986) ISO/6162-2 (1998)NFE 48 054, ISO/CD 6164-1 (1996)(1998) ISO/CD 6164-2 (1996)
NFE 48 055,
joints "o" ring All standards/Tous standards suivant SAE
UNC Screws/Vis UNC SAE 3000 et SAE 6000 ANSI B 18-3
CHC Screws/Vis CHC métrique All standards/Tous standards NFE 25-125 DIN 912
Nuts/Ecrous All standards/Tous standards NFE 27411
"Square" Standards "Carré"
Brise jet CETOP Recommandation RU-H/6
CARACTERISTIQUESTECHNIQUES DESCONNECTEURS
A BRIDES/FLANGED CONNECTIONSTECHNICAL SPECIFICATIONS
5
CARACTERISTIQUESTECHNIQUES DESCONNECTEURS
A BRIDES/FLANGED CONNECTIONSTECHNICAL SPECIFICATIONS
Les pressions nominales sont pré écurité de 4 ans dans des conditions d'utilisation normales à des températures entre - 20°C et + 100°C. L'étanchéité des raccordements DELTA DELAGE est assur ée en version standard par des joints thoriques en perbunan
é :
ETANCHEITE /SEALING
The nominal pressures indicated above allow for a safety factor of 4 under normal operating conditions at temperatures between minus 20°C and + 100°C. Standard versions of DELTA connections are sealed by "O"rings made from perbunan with a hardness of 90 shore. There is a
After selecting the type of connection and reference standard, the following are our recommendations :
FLUIDES/ FLUIDES QUALITE/ GRADEHuile minérale, eauadditionnée d'huilesoluble
-30° + 110°
-20° + 200° V
Perbunan
"Viton"ElastomèreElastomer
FluoréFluoride
Mineral oilswater plussoluble oil
hydrauliques
Huiles àhaute température
Pydraul and non
High temperature
Sans indicatif(exécution standard)
No referenceletter(standard seal)
TEMPERATURE ° / .FER ED FITACIDNIC REF. LETTER
Après le choix du type de raccordement et du standard de r éférence, il est recommandé, de suivre les indications suivantes :
Flanged head Butt Welding1) Chamfer the tube at 45°2) Carefully deburr the inside and outside of the tube end.
Collets à souder Butt Welding1) Chanfreiner le tube à 45°, après l'avoir coupé bien d'équerre2) Ebavurer soigneusement l'intérieur et l'extérieur.
ératures, nous consulter.Pour des applications particulières, nous pouvons fournir des ensembles équipés de joints spéciaux, (en particulier de joints métalliques).
MONTAGE /METHODS OF ASSEMBLY
Socket Welding connections (types "C" - "D" - "V", plus adapters)1) Cut the tube, square, and carefully deburr it.2) Ensure that there is a gap of 1 to 1,5 millimeters between the end of the tube and bottom of the welding socket, to allow for any expansion that takes place during welding.
Collets à souder Socket Welding (type "C"-"D"-"V" et adaptateur)1) Couper le tube d'équerre et ébavurer soigneusement2) Conserver un écartement de 1 à 1,5 mm entre l'extrémité du tube et le fond du logement Socket Welding, pour palier aux dilatations dues à la soudure.
:- Use, preferably, basic electrodes.
y of damaging the seal or gasket areas.
Tous les collets à souder :- Utiliser de référence des électrodes basiques- Fixer impé éviter la détérioration des portées de joint.- Monter la bride sur l'embout, et non sur le tube, avant la soudure.
és ou Brides taraudées - Monter de préférence la bride sur son support avant de monter le raccord.
All types of connection :
2) Place the pipe assemblies in position and check that the sealing and locating faces are parallel
anical stresses caused by poor alignment or too large a gap, when the bolts are tightened5) The bolts or screws are to be tightened evenly, two by two, on diametrically opposed sides or the assembly.
Tous les raccordements :1) Nettoyer et rincer les parties de tuyauterie équipées.2) Présenter ces tuyauteries et vé èlisme des faces d'appui.3) Monter le joint dans son logement en prenant soin de le graisser.4) Pour la mise en place dé èles et que lors du serrage des boulons, elles ne subissent aucune contrainte mécanique due à un mauvais alignement ou à un trop gros écartement.5) Les boulons / vis doivent être serrés deux par deux, diamètralement opposées.
B0,8
B
e
1,5 maxi
6
BRIDES DE FIXATION ET LIAISON PORT ASSEMBLY FLANGES/UNION ASSEMBLY
1 11 53 1 A B0251BRIDEFLANGE
MATIEREMATERIAL
VISSERIESCREW
JOINT"O" RING
10
60
12
62
19
CODE
1/2 BRIDES/SPLIT FLANGESSAE 30001/2 BRIDES/SPLIT FLANGESISO 6162-11/2 BRIDES/SPLIT FLANGESSAE 60001/2 BRIDES/SPLIT FLANGESISO 6162-2BRIDES "S SIDERURGIEFLANGES
DESIGNATION
BVEFS
CODE
BUNA NVITONEPDMFLSCOLLET SANS GORGEWITHOUT GROOVE
DESIGNATION
A
I
U
M
CODE
METRIQUE ACIERCARBON STEELMETRIQUE INOXSTAINLESS STEELUNC ACIERCARBON STEELUNC INOXSTAINLESS STEEL
DESIGNATION
1
3
6
CODE
TOUT ACIERCARBON STEELTOUT INOX 316 LSTAINLESS STEELCOLLET INOX 316 LSTAINLESS STEEL
DESIGNATION
Exemple de référence/Model code example
–
2.11.53.0251/6 UFBride de liaison avec : collet inox BW 316L, joint FLS, visserie UNC acier/"O" ring FLS, UNC screw carbon steel
BLOCS BLOCKS
E 10 1 A B0251MATIEREMATERIAL
TYPE VISSERIESCREW
JOINT"O" RING
BVEF
CODE
BUNA NVITONEPDMFLS
DESIGNATION
A
I
U
M
CODE
METRIQUE ACIERCARBON STEELMETRIQUE INOXSTAINLESS STEELUNC ACIERCARBON STEELUNC INOXSTAINLESS STEEL
DESIGNATION
1
6
CODE
ACIERCARBON STEELINOX 316 LSTAINLESS STEEL
DESIGNATION
19
CODE
BLOCS "S"SIDERURGIE
DESIGNATION
Exemple de référence/Model code example
– T.10.0251/6 IVBloc en T, inox 316L, visserie inox métrique,joint vittonBlock "T" Stainless steel 316LStainless stell screw, "O" ring viton
Exemple de référence/Model code example
– N.13.21.0251/6Obturateur inox 316LPlugs Stainless steel
Exemple de référence/Model code example
– A.1.0251/6Bride inox 316L
COMPOSANTS COMPONENTS
NP 6 21 10251
A 1 10251
MATIEREMATERIAL
N
P
1
6
CODE
COLLET AVEC GORGEARE GROOVEDCOLLET SANS GORGEWITHOUT GROOVEACIERCARBON STEELINOX 316 LSTAINLESS STEEL
DESIGNATION
COMMENTCOMMANDER/HOW TO ORDER
7
BRIDES/FLANGESISO 6162 - 1
SAE 3000
BRIDES DE FIXATION BW PORT ASSEMBLY FLANGES BW
10
13
19
25
32
38
51
64
76
89
102
3/8"
1/2"
3/4"
1"
1"1/4
1"1/2
2"
2"1/2
3"
3"1/2
4"
350 bars
350 bars
350 bars
350 bars
250 bars
200 bars
200 bars
160 bars
100 bars
35 bars
35 bars
14 à 17,14
18 à 22
25 à 28
30 à 35
38 à 42,4
48 à 50
60 à 63
73 à 76
88 à 90
100 à 102
114,3
18
22
28
35
43
50
62
74
90
102
114
40
45
50
55
60
65
70
75
85
90
100
12
13
19
25
32
38
47
58
70
89
102
16,5
17,5
22,3
26,2
30,2
35,7
42,9
50,8
61,9
69,9
77,8
35,0
38,1
47,6
52,4
58,7
69,9
77,8
88,9
106,4
120,7
130,2
40
46
52
59
73
83
97
109
131
140
152
50
54
65
70
79
94
102
114
135
152
162
M8
M8
M10
M10
M12
M10
M14
M12
M14
M12
M14
M12
M16
M16
M16
30
25
30
30
35
30
40
35
40
35
45
40
50
50
50
5/16"
3/8"
3/8"
7/16"
1/2"
1/2"
1/2"
5/8"
5/8"
5/8"
1"
1"1/4
1"1/4
1"1/2
1"1/2
1"1/2
1"3/4
1"3/4
2"
2"
0,3
0,3
0,5
0,6
0,8
1,2
1,5
1,8
3,6
3,2
3,8
111530101
111530151
111530201
111530251
111530321
161530321
111530401
161530401
111530501
161530501
111530651
161530651
111530801
111530901
111531001
ND SIZE WORKINGPRESSURE
DN TAILLE PRESSIONUTILISATION
BAR
Ø EXTERIEURDU TUBE
VISSERIE MASSEkg
REFERENCEBRIDE
MONOBLOC
H1 L A GG± 0,25
Q± 0,25
FF O
WZWZ,MM GAZ, SCHD,
ENOTHGIEWSWERCSDO EBUTPIECE FLANGE
étrique ne doit pas être utilisé pour de nouvelles conceptions.La bride DN 10 (3/8) est livrée en acier étiré.Brides standard livrées avec visserie métrique,joints Perbunan 90 shores. Pour des ensembles avec :
collets sans gorge brides inox collets inox visserie UNC joints FLS joints viton joints EPDM 1/2 brides
Do not use this male metric threaded for new constructions.
90 shore o'rings.
UNC screws FLS o'rings viton o'rings EPDM o'rings
ONE PIECE FLANGEBRIDE MONOBLOC
SPLIT FLANGE1/2 BRIDE
GGFF
Q O
GGFF
Q O
L
A
W
Z
H1
TYPE 1métrique TYPE 2 UNC
CODE 61
8
BRIDES/FLANGESISO 6162 - 1
SAE 3000
ONE PIECE FLANGEBRIDE MONOBLOC
GGFF
Q O
L
W
Z
AH
1
BRIDES DE LIAISON BW UNION ASSEMBLY FLANGES BW
10
13
19
25
32
38
51
64
76
89
102
3/8"
1/2"
3/4"
1"
1"1/4
1"1/2
2"
2"1/2
3"
3"1/2
4"
350 bars
350 bars
350 bars
350 bars
250 bars
200 bars
200 bars
160 bars
100 bars
35 bars
35 bars
14 à 17,14
18 à 22
25 à 28
30 à 35
38 à 42,4
48 à 50
60 à 63
73 à 76
88 à 90
100 à 102
114,3
18
22
28
35
43
50
62
74
90
102
114
80
90
100
110
120
130
140
150
170
180
200
12
13
19
25
32
38
47
58
70
89
102
16,5
17,5
22,3
26,2
30,2
35,7
42,9
50,8
61,9
69,9
77,8
35,0
38,1
47,6
52,4
58,7
69,9
77,8
88,9
106,4
120,7
130,2
40
46
52
59
73
83
97
109
131
140
152
50
54
65
70
79
94
102
114
135
152
162
M8
M8
M10
M10
M12
M10
M14
M12
M14
M12
M14
M12
M16
M16
M16
45
35
40
45
45
45
50
50
50
50
55
55
65
65
70
5/16"
3/8"
3/8"
7/16"
1/2"
1/2"
1/2"
5/8"
5/8"
5/8"
1"1/2
1"1/2
1"3/4
1"3/4
2"
2"
2"1/4
2"1/2
2"1/2
2"3/4
0,5
0,5
0,8
1,1
1,5
2,2
2,9
3,7
6,8
6
7,2
211530101
211530151
211530201
211530251
211530321
261530321
211530401
261530401
211530501
261530501
211530651
261530651
211530801
211530901
211531001
ND SIZE WORKINGPRESSURE
DN TAILLE PRESSIONUTILISATION
BAR
Ø EXTERIEURDU TUBE
VISSERIE MASSEkg
REFERENCEBRIDE
MONOBLOC
H1 L A GG± 0,25
Q± 0,25
FF O
WZWZ,MM GAZ, SCHD,
ENOTHGIEWSWERCSDO EBUTPIECE FLANGE
étrique ne doit pas être utilisé pour de nouvelles conceptions.La bride DN 10 (3/8) est livrée en acier étiré.Brides standard livrées avec visserie métrique,joints Perbunan 90 shores. Pour des ensembles avec :
collets réduit brides inox collets inox visserie UNC joints FLS joints viton joints EPDM
Do not use this male metric threaded for new constructions.
90 shore o'rings.
UNC screws FLS o'rings viton o'rings EPDM o'rings
TYPE 1métriqueTYPE 2 UNC
CODE 61
9
BRIDES/FLANGESISO 6162 - 1
SAE 3000
ONE PIECE FLANGEBRIDE MONOBLOC
SPLIT FLANGE1/2 BRIDE
GGFF
Q O
GGFF
Q O
BRIDES DE FIXATION BW REDUIT PORT ASSEMBLY FLANGES BW REDUCING
13
19
25
32
38
51
64
76
1/2"
3/4"
1"
1"1/4
1"1/2
2"
2"1/2
3"
350 bars
350 bars
350 bars
250 bars
200 bars
200 bars
160 bars
100 bars
14 à 17,14
18 à 22
25 à 28
30 à 35
38 à 42,4
48 à 50
60 à 63
73 à 76
18
22
28
35
43
50
62
74
45
50
55
60
65
70
75
85
12
13
19
25
32
38
47
58
17,5
22,3
26,2
30,2
35,7
42,9
50,8
61,9
38,1
47,6
52,4
58,7
69,9
77,8
88,9
106,4
46
52
59
73
83
97
109
131
54
65
70
79
94
102
114
135
M8
M10
M10
M12
M10
M14
M12
M14
M12
M14
M12
M16
25
30
30
35
30
40
35
40
35
45
40
50
5/16"
3/8"
3/8"
7/16"
1/2"
1/2"
1/2"
5/8"
1"1/4
1"1/4
1"1/4
1"1/2
1"1/2
1"1/2
1"3/4
1"3/4
0,30
0,40
0,55
0,75
1,10
1,50
2,15
3,50
111520151
111520201
111520251
111520321
161520321
111520401
161520401
111520501
161520501
111520651
161520651
111520801
ND SIZE WORKINGPRESSURE
DN TAILLE PRESSIONUTILISATION
BAR
Ø EXTERIEURDU TUBE
VISSERIE MASSEkg
REFERENCEBRIDE
MONOBLOC
H1 L A GG± 0,25
Q± 0,25
FF O
WZWZ,MM GAZ, SCHD,
ENOTHGIEWSWERCSDO EBUTPIECE FLANGE
étrique ne doit pas être utilisé pour de nouvelles conceptions.Brides standard livrées avec visserie métrique,joints Perbunan 90 shores. Pour des ensembles avec :
collets sans gorge brides inox collets inox visserie UNC joints FLS joints viton joints EPDM 1/2 brides
Do not use this male metric threaded for new constructions.
90 shore o'rings.
UNC screws FLS o'rings viton o'rings EPDM o'rings
L
A
WZ
H1
TYPE 1métrique TYPE 2 UNC
CODE 61
10
BRIDES/FLANGESISO 6162 - 1
SAE 3000
BRIDES PRISE DE PRESSION TEST PORT FLANGES
13
19
25
32
38
51
64
76
89
1/2"
3/4"
1"
1"1/4
1"1/2
2"
2"1/2
3"
3"1/2
350 bars
350 bars
350 bars
250 bars
200 bars
200 bars
160 bars
100 bars
35 bars
ND SIZE WORKINGPRESSURE
DN TAILLE PRESSIONUTILISATION
BAR Z W Z W
25
28
29
34
34
38
40
45
45
15
20
25
32
38
47
58
70
89
17,5
22,2
26,2
30,2
35,7
42,9
50,8
61,9
69,9
38,1
47,6
52,4
58,7
69,9
77,8
88,9
106,4
120,7
45
50
50
60
80
100
110
130
140
54
65
70
80
94
100
114
135
152
M8
M10
M10
M12
M10
M14
M12
M14
M12
M14
M12
M16
M16
5/16"
3/8"
3/8"
7/16"
1/2"
1/2"
1/2"
5/8"
5/8"
0,2
0,4
0,6
0,8
1,4
2,8
3,6
4,6
6,6
N11660153
N11660203
N11660253
N11660323
N61660323
N11660403
N61660403
N11660503
N61660503
N11660653
N61660653
N11660803
N11660903
VISSERIE MASSEkg
REFERENCEBRIDESEULE
L A GG± 0,25
Q± 0,25
FF O
SCREWS WEIGHT REF. FOR FLANGE ONLY
140110151
140110201
140110251
140110321
140610321
140110401
140610401
140110501
140610501
140110651
140610651
140110801
140110903
REFERENCEAVEC PRISE
DE PRESSION
REF. FORFLANGE EQUIPED
étrique ne doit pas être utilisé pour de nouvelles conceptions.Brides standard livrées avec visserie métrique,joints Perbunan 90 shores. Pour des ensembles avec :
prise de pression taraudée NPT brides inox Prise à clapet (sur demande).
Do not use this male metric threaded for new constructions.
90 shore o'rings.
A
FF
GG
QO
Ø T1/4 BSPcylindrique
L
A
O
FF40
FLANGE WITH TEST FITTINGBRIDE AVEC PRISE DE PRESSION
TYPE 1métrique TYPE 2 UNC
CODE 61
11
BRIDES/FLANGESISO 6162 - 1
SAE 3000
BRIDES DE FIXATION TYPE "C" SOCKET WELDING INTEGRAL PORT ASSEMBLY FLANGES TYPE "C" INTEGRAL SW
20,521,725,527,330,532,534,035,538,540,543,038,540,543,049,050,449,050,461,065,861,065,874,077,081,074,077,081,090,5
110500151110500152110500201110500202110500251110500252110500253110500254110500321110500322110500323160500321160500322160500323110500401110500402160500401160500402110500501110500502160500501160500502110500651110500652110500653160500651160500652160500653110500801
13
19
25
32
38
51
64
76
1/2"
3/4"
1"
1"1/4
1"1/2
2"
2"1/2
3"
315 bars
315 bars
315 bars
200 bars
200 bars
200 bars
150 bars
100 bars
20
25
3032
35384042384042
50
5060656065
80
8090
21,25
26,75
33,50
42,25
42,2548,25
48,25
60,30
60,30
76,10
76,10
21,34
26,68
33,40
42,16
42,1648,26
48,26
60,32
60,32
73,02
73,02
88,9
17,5
22,3
26,2
30,2
35,7
42,9
50,8
61,9
38,1
47,6
52,4
58,7
69,9
77,8
88,9
106,4
46
52
59
73
83
97
109
131
54
65
70
79
94
102
114
135
M8
M10
M10
M12
M10
M14
M12
M14
M12
M14
M12
M16
25
30
30
35
30
40
35
40
35
45
40
50
30
35
44
55
63
79
98
116
13
13
16
18
20
22
24
28
60
68
75
95
100
107
130
150
13
19
25
32
38
47
58
70
5/16"
3/8"
3/8"
7/16"
1/2"
1/2"
1/2"
5/8"
1"1/4
1"1/4
1"1/4
1"1/2
1"1/2
1"1/2
1"3/4
1"3/4
0,4
0,6
0,8
1,1
1,6
2,0
3,4
5,5
ND SIZE WORKINGPRESSURE
DN TAILLE PRESSIONUTILISATION
BAR
Ø EXTERIEURDU TUBE
VISSERIE MASSEkg
REFERENCE1/2 BRIDE
I1 I2 K L A GG± 0,25
Q± 0,25
FF O
MM Z W Z WGAZ SCHD
TUBE OD SCREWS WEIGHT SPLIT FLANGE
étrique ne doit pas être utilisé pour de nouvelles conceptions.Brides standard livrées avec visserie métrique, joints Perbunan 90 shores. Pour des ensembles avec :
collets sans gorge brides inox collets inox visserie UNC joints FLS joints viton joints EPDM.
Les ensembles Socket Welding Integral type "C" sont montés avec des 1/2 brides.
Do not use this male metric threaded for new constructions.
UNC screws FLS o'rings viton o'rings EPDM o'ring
The Integral Socket Welding Flanges type "C"
TYPE "C"TYPE "C"
SPLIT FLANGE1/2 BRIDE
GGFF
Q O
L
AW
Z
K
I1I2
TYPE 1métrique TYPE 2 UNC
ON REQUESTLIAISON TYPE "V" SOCKET WELDING INTEGRALSUR CONSULTATION
CODE 61
12
BRIDES/FLANGESISO 6162 - 1
SAE 3000
BRIDES DE FIXATION TYPE "D" SOCKET WELDING REDUIT PORT ASSEMBLY FLANGES TYPE "D" REDUCING SW
16,317,718,520,521,725,527,330,532,534,035,530,532,534,035,538,540,542,838,540,542,849,050,849,050,861,065,861,065,874,077,080,8
111510151111510152111510201111510202111510203111510251111510252111510321111510322111510323111510324161510321161510322161510323161510324111510401111510402111510403161510401161510402161510403111510501111510502161510501161510502111510651111510652161510651161510652111510801111510802111510803
13
19
25
32
38
51
64
76
1/2"
3/4"
1"
1"1/4
1"1/2
2"
2"1/2
3"
315 bars
315 bars
315 bars
200 bars
200 bars
200 bars
150 bars
100 bars
16
1820
25
3032
353032
35384042384042
50
5060656065
80
16,75
21,25
26,75
33,50
33,50
42,25
42,2548,25
48,25
60,30
60,30
76,10
17,14
21,34
26,68
33,40
33,40
42,16
42,1648,26
48,26
60,30
60,30
73,02
17,5
22,3
26,2
30,2
35,7
42,9
50,8
61,9
38,1
47,6
52,4
58,7
69,9
77,8
88,9
106,4
46
52
59
73
83
97
109
131
54
65
70
79
94
102
114
135
M8
M10
M10
M12
M10
M14
M12
M14
M12
M14
M12
M16
25
30
30
35
30
40
35
40
35
45
40
50
24
31,5
38
43
50
62
74
90
13
13
13
16
18
20
22
25
35
40
45
50
55
65
75
85
12
13
19
25
32
38
47
58
5/16"
3/8"
3/8"
7/16"
1/2"
1/2"
1/2"
5/8"
1"1/4
1"1/4
1"1/4
1"1/2
1"1/2
1"1/2
1"3/4
1"3/4
0,3
0,5
0,6
0,8
1,2
1,7
2,4
3,9
ND SIZE WORKINGPRESSURE
DN TAILLE PRESSIONUTILISATION
BAR
Ø EXTERIEURDU TUBE
VISSERIE MASSEkg
REFERENCEBRIDE
MONOBLOC
I1 I2 K L A GG± 0,25
Q± 0,25
FF O
MM Z W Z WGAZ SCHD
TUBE OD SCREWS WEIGHT ONEPIECE FLANGE
étrique ne doit pas être utilisé pour de nouvelles conceptions. Brides standard livrées avec visserie métrique, joints Perbunan 90 shores. Pour des ensembles avec :
collets sans gorge - brides inox - collets inox - visserie UNC joints FLS - joints viton - joints EPDM - 1/2 brides
Do not use this male metric threaded for new constructions.
UNC screws - FLS o'rings viton o'rings - EPDM o'rings -
TYPE "D"TYPE "D"
ONE PIECE FLANGEBRIDE MONOBLOC
GGFF
Q O
L
A
WZ
K
I2I1
TYPE 1métrique TYPE 2 UNC
SPLIT FLANGE1/2 BRIDE
GGFF
Q O
CODE 61
13
BRIDES/FLANGESISO 6162 - 1
SAE 3000
BRIDES DE LIAISON TYPE "D" SOCKET WELDING REDUIT UNION ASSEMBLY FLANGES TYPE "D" REDUCING SW
16,317,718,520,521,725,527,330,532,534,035,530,532,534,035,538,540,542,838,540,542,849,050,849,050,861,065,861,065,874,077,080,8
211510151211510152211510201211510202211510203211510251211510252211510321211510322211510323211510324261510321261510322261510323261510324211510401211510402211510403261510401261510402261510403211510501211510502261510501261510502211510651211510652261510651261510652211510801211510802211510803
13
19
25
32
38
51
64
76
1/2"
3/4"
1"
1"1/4
1"1/2
2"
2"1/2
3"
315 bars
315 bars
315 bars
200 bars
200 bars
200 bars
150 bars
100 bars
16
1820
25
3032
353032
35384042384042
50
5060656065
80
16,75
21,25
26,75
33,50
33,50
42,25
42,2548,25
48,25
60,30
60,30
76,10
17,14
21,34
26,68
33,40
33,40
42,16
42,1648,26
48,26
60,30
60,30
73,02
17,5
22,3
26,2
30,2
35,7
42,9
50,8
61,9
38,1
47,6
52,4
58,7
69,9
77,8
88,9
106,4
46
52
59
73
83
97
109
131
54
65
70
79
94
102
114
135
M8
M10
M10
M12
M10
M14
M12
M14
M12
M14
M12
M16
35
40
45
45
45
50
50
50
50
55
55
65
24
31,5
38
43
50
62
74
90
13
13
13
16
18
20
22
25
70
80
90
100
110
130
150
170
12
13
19
25
32
38
47
58
5/16"
3/8"
3/8"
7/16"
1/2"
1/2"
1/2"
5/8"
1"1/2
1"1/2
1"3/4
1"3/4
2"
2"
2"1/4
2"1/2
0,5
0,9
1,2
1,6
2,3
3,2
4,7
7,8
ND SIZE WORKINGPRESSURE
DN TAILLE PRESSIONUTILISATION
BAR
Ø EXTERIEURDU TUBE
VISSERIE MASSEkg
REFERENCEBRIDE
MONOBLOC
I1 I2 K L A GG± 0,25
Q± 0,25
FF O
MM Z W Z WGAZ SCHD
TUBE OD SCREWS WEIGHT ONEPIECE FLANGE
étrique ne doit pas être utilisé pour de nouvelles conceptions. Brides standard livrées avec visserie métrique, joints Perbunan 90 shores. Pour des ensembles avec :
brides inox - collets inox - visserie UNC joints FLS - joints viton - joints EPDM
Do not use this male metric threaded for new constructions.
UNC screws FLS o'rings - viton o'rings - EPDM o'rings
TYPE "D"TYPE "D"
ONE PIECE FLANGEBRIDE MONOBLOC
GGFF
Q O
L
A
K
I2I1
W
Z
TYPE 1métrique TYPE 2 UNC
ON REQUESTLIAISON SW INTEGRALTYPE "P" SUR CONSULTATION
CODE 61
14
BRIDES/FLANGESISO 6162 - 1
SAE 3000
ONE PIECE FLANGEBRIDE MONOBLOC
SPLIT FLANGE1/2 BRIDE
BRIDES DE FIXATION AVEC OBTURATEUR PORT ASSEMBLY FLANGES WITH PLUGS
13
19
25
32
38
51
64
76
89
102
1/2"
3/4"
1"
1"1/4
1"1/2
2"
2"1/2
3"
3"1/2
4"
350 bars
350 bars
350 bars
250 bars
200 bars
200 bars
160 bars
100 bars
35 bars
35 bars
15
16
18
18
18
18
21
24
45
55
17,5
22,3
26,2
30,2
35,7
42,9
50,8
61,9
69,9
77,8
38,1
47,6
52,4
58,7
69,9
77,8
88,9
106,4
120,7
130,2
46
52
59
73
83
97
109
131
140
152
54
65
70
79
94
102
114
135
152
162
M8
M10
M10
M12
M10
M14
M12
M14
M12
M14
M12
M16
M16
M16
25
30
30
35
30
40
35
40
35
45
40
50
50
50
5/16"
3/8"
3/8"
7/16"
1/2"
1/2"
1/2"
5/8"
5/8"
5/8"
1"1/4
1"1/4
1"1/4
1"1/2
1"1/2
1"1/2
1"3/4
1"3/4
2"
2"
0,3
0,4
0,5
0,7
1,1
1,3
1,8
3,3
4,8
6,7
111570151
111570201
111570251
111570321
161570321
111570401
161570401
111570501
161570501
111570651
161570651
111570801
111570901
111571001
ND SIZE WORKINGPRESSURE
DN TAILLE PRESSIONUTILISATION
BAR
Ø EXTERIEURDU TUBE
VISSERIE MASSEkg
REFERENCEBRIDE
MONOBLOC
H1 L A GG± 0,25
Q± 0,25
FF O
WZWZ,MM GAZ, SCHD,
ENOTHGIEWSWERCSDO EBUTPIECE FLANGE
étrique ne doit pas être utilisé pour de nouvelles conceptions.Brides standard livrées avec visserie métrique,joints Perbunan 90 shores. Pour des ensembles :
obturateur sans gorge brides inox obturateur inox visserie UNC joints FLS joints viton joints EPDM 1/2 brides
Do not use this male metric threaded for new constructions.
90 shore o'rings.
plugs without groove
stainless steel plugs UNC screws FLS o'rings viton o'rings EPDM o'rings
GGFF
Q O
GGFF
Q O
L
W
Z
TYPE 1métrique TYPE 2 UNC
CODE 61
15
BRIDES/FLANGESISO 6162 - 1
SAE 3000
BRIDES PLEINES BLANK FLANGES
13
19
25
32
38
51
64
76
89
102
1/2"
3/4"
1"
1"1/4
1"1/2
2"
2"1/2
3"
3"1/2
4"
350 bars
350 bars
350 bars
250 bars
200 bars
200 bars
160 bars
100 bars
35 bars
35 bars
25
28
29
34
34
38
40
45
45
50
17,5
22,3
26,2
30,2
35,7
42,9
50,8
61,9
69,9
77,8
38,1
47,6
52,4
58,7
69,9
77,8
88,9
106,4
120,7
130,2
45
50
50
60
80
100
109
130
140
160
54
65
70
80
94
102
114
135
152
170
M8
M10
M10
M12
M10
M14
M12
M14
M12
M14
M12
M16
M16
M16
40
45
45
55
50
55
55
60
55
60
60
70
70
75
5/16"
3/8"
3/8"
7/16"
1/2"
1/2"
1/2"
5/8"
5/8"
5/8"
1"1/2
1"3/4
1"3/4
2"
2"1/4
2"1/4
2"1/2
2"3/4
2"3/4
3"
0,5
0,6
0,8
1,2
1,9
3,2
4,1
5,8
8
11
111610151
111610201
111610251
111610321
161610321
111610401
161610401
111610501
161610501
111610651
161610651
111610801
111610901
111611001
ND SIZE WORKINGPRESSURE
DN TAILLE PRESSIONUTILISATION
BAR
Ø EXTERIEURDU TUBE
VISSERIE MASSEkg
REFERENCEBRIDE
MONOBLOC
H1 L A GG± 0,25
Q± 0,25
FF O
WZWZ,MM GAZ, SCHD,
ENOTHGIEWSWERCSDO EBUTPIECE FLANGE
étrique ne doit pas être utilisé pour de nouvelles conceptions.Brides standard livrées avec visserie métrique,joints Perbunan 90 shores. Pour des ensembles :
brides sans gorge brides inox visserie UNC joints FLS joints viton joints EPDM
La bride pleine est prévue comme bride ébauche et peutdonc recevoir différents taraudages.
Do not use this male metric threaded for new constructions.
90 shore o'rings.
UNC screws FLS o'rings viton o'rings EPDM o'rings
and can therefore receive various tappings.
L
W
Z
GGFF
Q O
TYPE 1métrique TYPE 2 UNC
CODE 61
16
BRIDES/FLANGESISO 6162 - 1
SAE 3000
GGFF
Q
O
W
H
K
T
Z
étrique ne doit pas être utilisé pour de nouvelles conceptions.Brides standard livrées avec visserie métrique,joints Perbunan 90 shores. Pour des ensembles :
brides sans gorge brides inox visserie UNC joints FLS joints viton joints EPDM (voir p 7, comment commander).
Do not use this male metric threaded for new constructions.
90 shore o'rings.
UNC screws FLS o'rings viton o'rings EPDM o'rings (see p 7, how to order).
A
BRIDES MONOBLOC TARAUDEES. BSP CYLINDRIQUE,NPT PORT ASSEMBLY FLANGES : FEMALE THREADED BSPP, NPT
111580101111580102111580151111580152111580201111580202111580251111580252111580321111580322161580321161580322111580401111580402161580401161580402111580501111580502161580501161580502111580652161580652111580802111580902111581002
111590101111590102111590151111590152111590201111590202111590251111590252111590321111590322161590321161590322111590401111590402161590401161590402111590501111590502161590501161590502111590652161590652111590802111590902111591002
10
13
19
25
32
38
51
64
7689
102
3/8"
1/2"
3/4"
1"
1"1/4
1"1/2
2"
2"1/2
3"3"1/24"
345 bars
345 bars
345 bars
345 bars
250 bars
200 bars
200 bars
160 bars
100 bars35 bars35 bars
1/4"3/8"3/8"1/2"1/2"3/4"3/4"1"1"
1"1/41"
1"1/41"1/41"1/21"1/41"1/21"1/2
2"1"1/2
2"2"1/2
3"3"1/2
4"
16,5
17,5
22,3
26,2
30,2
35,7
42,9
50,8
61,969,977,8
35
38,1
47,6
52,4
58,7
69,9
77,8
88,9
106,4120,7130,2
40
46
50
55
6568656878
90
105
124136146
50
54
65
70
8179817995939593102
114
134152162
M8
M8
M10
M10M10M12
M10
M14
M12
M14
M12
M14M12M16M16M16
30
30
30
403040404035504545
45
45
4545505050
20
16
18
2118252125212725272525
25
25
272727
13
19
19
192222
22
24
24
2630263030
343434
13,015,013,0
13,019,019,025,025322532323832383851385163
738999
5/16"
3/8"
3/8"
7/16"
1/2"
1/2"
1/2"5/8"5/8"5/8"
1"1/4
1"1/2
1"1/21"1/4
1"3/4
1"3/4
1"3/4
1"3/42"2"2"
0,3
0,4
0,6
0,7
0,9
1,4
1,9
2,0
2,32,42,8
ND SIZE WORKINGPRESSURE
DN TAILLE PRESSIONUTILISATION
BAR
TARAUDAGET
VISSERIE MASSEkg
REFERENCEBSP
CYLINDRIQUE
REFERENCENPTTYPE 1 métrique TYPE 2 UNC
H K A GG± 0,25
Q± 0,25
FF O
Z W Z W
TAPPING SCREWS WEIGHT BSPP NPT
CODE 61
17
BRIDES/FLANGESISO 6162 - 1
SAE 3000
BRIDES DE FIXATION AVEC EMBOUT FILETE. BSP CYLINDRIQUE PORT ASSEMBLY FLANGES. MALE THREADED BSPP
10
13
19
25
32
38
51
3/8"
1/2"
3/4"
1"
1"1/4
1"1/2
2"
300 bars
300 bars
300 bars
300 bars
150 bars
150 bars
150 bars
13,0
14,0
16,5
18,0
18,0
22,0
22,0
3/8"
1/2"
3/4"
1"
1"1/4
1"1/2
2"
1
1
1
1
1
1
1,5
55
60
60
65
70
75
80
15
19
27
32
38
46
55
10
13
18
24
32
38
47
16,5
17,5
22,3
26,2
30,2
35,7
42,9
35,0
38,1
47,6
52,4
58,7
69,9
77,8
40
46
52
59
73
83
97
50
54
65
70
79
94
102
M8
M8
M10
M10
M12
M10
M14
M12
M14
M12
30
25
30
30
35
30
40
35
40
35
5/16"
3/8"
3/8"
7/16"
1/2"
1/2"
1"1/4
1"1/4
1"1/4
1"1/2
1"1/2
1"1/2
0,30
0,35
0,50
0,65
0,80
1,10
1,60
110560101
110560151
110560201
110560251
110560321
160560321
110560401
160560401
110560501
160560501
ND SIZE WORKINGPRESSURE
DN TAILLE PRESSIONUTILISATION
BAR
FILETAGE BSP CYLINDRIQUE
F
VISSERIE MASSEkg
REFERENCE1/2 BRIDE
L P/Plats
A GG± 0,25
Q± 0,25
FF O
Z W Z W
TILPSTHGIEWSWERCSDEDAERHTFLANGE
étrique ne doit pas être utilisé pour de nouvelles conceptions.La bride DN 10 (3/8) est livrée en acier étiré.Brides standard livrées avec visserie métrique,joints perbunan 90 shores. Pour des ensembles avec :
collets sans gorge brides inox collets inox visserie UNC joints FLS joints viton joints EPDM (voir p 7, comment commander).
Do not use this male metric threaded for new constructions.
90 shore o'rings.
UNC screws FLS o'rings viton o'rings EPDM o'rings (see p 7, how to order).
SPLIT FLANGE1/2 BRIDE
GGFF
Q OAFL
D
EP/Plats
montage possibleavec bride monobloc
montage possibleavec bride monobloc
TYPE 1 métrique TYPE 2 UNCD E
CODE 61
18
BRIDES/FLANGESISO 6162 - 1
SAE 3000
BRIDES DE FIXATION AVEC EMBOUT FILETE. BSP CONIQUE, NPT PORT ASSEMBLY FLANGES WITH MALE THREADED STUDS
10
13
19
25
32
38
51
3/8"
1/2"
3/4"
1"
1"1/4
1"1/2
2"
300 bars
300 bars
300 bars
300 bars
150 bars
150 bars
150 bars
3/8"
1/2"
3/4"
1"
1"1/4
1"1/2
2"
50
55
60
70
82
90
95
15
19
27
30
38
42
50
11
13
18
24
30
36
44
16,5
17,5
22,3
26,2
30,2
35,7
42,9
35,0
38,1
47,6
52,4
58,7
69,9
77,8
40
46
52
59
73
83
97
50
54
65
70
79
94
102
M8
M8
M10
M10
M12
M10
M14
M12
M14
M12
30
25
30
30
35
30
40
35
40
35
5/16"
3/8"
3/8"
7/16"
1/2"
1/2"
1"1/4
1"1/4
1"1/4
1"1/2
1"1/2
1"1/2
0,30
0,30
0,50
0,70
0,90
1,40
1,80
111550101
111550151
111550201
111550251
111550321
161550321
111550401
161550401
111550501
161550501
ND SIZE WORKINGPRESSURE
DN TAILLE PRESSIONUTILISATION
BAR
FILETAGE F
VISSERIE MASSEkg
REFERENCEBRIDE MONO
NPT
111540101
111540151
111540201
111540251
111540321
161540321
111540401
161540401
111540501
161540501
REFERENCEBRIDE MONO BSP CONIQ.
L P/Plats
A GG± 0,25
Q± 0,25
FF O
Z W Z W
ECEIP ENOTHGIEWSWERCSDEDAERHTFLANGE
ONE PIECE FLANGE
étrique ne doit pas être utilisé pour de nouvelles conceptions.La bride DN 10 (3/8) est livrée en acier étiré.Brides standard livrées avec visserie métrique,joints Perbunan 90 shores. Pour des ensembles avec :
collets sans gorge brides inox collets inox visserie UNC joints FLS joints viton joints EPDM 1/2 brides
Do not use this male metric threaded for new constructions.
90 shore o'rings.
UNC screws FLS o'rings viton o'rings EPDM o'rings
ONE PIECE FLANGEBRIDE MONOBLOC
SPLIT FLANGE1/2 BRIDE
GGFF
Q O
GGFF
Q O
L
A
W
F
ZP/Plats
TYPE 1métrique TYPE 2 UNC
CODE 61
19
BLOCS/BLOCKSISO 6162 - 1
SAE 3000
BLOCS EQUERRES
1013192532
38
51
64
76
3/8"1/2"3/4"1"1"1/4
1"1/2
2"
2"1/2
3"
1215202532
38
47
58
70
5056668095
110
110
125
150
4046537282
92
110
132
131
5858737888
100
110
118
138
5560707590
110
130
150
160
0,91,11,92,6
4,1
5,9
7,5
8,016,7
M8M8M10M10M12M10M14M12M14M12M14M12M16
M8M8M10M10M12M10M14M12M14M12M14M12M16
5/16"3/8"3/8"
7/16"
1/2"
1/2"
1/2"5/8"
5/16"3/8"3/8"
7/16"
1/2"
1/2"
1/2"5/8"
2"1/42"3/43"
3"1/2
4"1/2
5"
5"6"1/2
16,517,522,226,230,2
35,7
42,9
50,8
61,9
35,0038,1047,6052,4058,70
69,85
77,80
88,90
106,40
E100101E100151E100201E100251E100321E600321E100401E600401E100501E600501E100651E600651E100801
ND SIZE
DN TAILLE A D GG± 0,25
Q± 0,25
FF O
31,032,039,049,057,0
67,0
66,5
70,0
83,0
X
22,026,530,036,041,0
46,0
55,0
66,0
77,5
Y REFERENCEMASSEkg
WEIGHT
Z W Z W
VISSERIE
SCREWS
TYPE 1métrique TYPE 2 UNCZ1 Z1
TARAUDAGE
TAPPING
métrique UNC
PORT ELBOW
BLOCS "L"
1013192532
38
51
64
76
3/8"1/2"3/4"1"1"1/4
1"1/2
2"
2"1/2
3"
M8M8M10M10M12M10M14M12M14M12M14M12M16
5/16"3/8"3/8"
7/16"
1/2"
1/2"
1/2"5/8"
1215192532
38
47
58
70
5254707080
100
110
120
140
50,056,0 68,580,095,0
110,0
110,0
125,0
150,0
0,81,01,52,1
3,4
5,5
7,2
13,021,0
4146546073
84
100
110
131
35,0038,1047,6052,4058,70
69,85
77,80
88,90
106,40
16,5017,5022,2026,2030,20
35,70
42,90
50,80
61,90
ND SIZE
DN TAILLE A O C FF Q± 0,25
GG± 0,25
Z Z
VISSERIE
SCREWS
TYPE 1métrique TYPE 2 UNC
L100101L100151L100201L100251L100321L600321L100401L600401L100501L600501L100651L600651L100801
REFERENCEMASSEkg
WEIGHT
"L" BLOCKS
GGFF
Q
GG
A
C
QO
2 fois 4 trous ØZ
D
X
F
A
A
O Z1
4 Vis CHc ØZLgW
GGFF
Y
Q
GG
Vue suivant F
étrique ne doit pas être utilisé pour de nouvelles conceptions. Les références s'entendent pour des blocs nus en acier, sans vis et sans joint, pour des livraisons avec :
visserie métrique - visserie UNC - joint PERBUNAN joint VITON - joints FLS - blocs inox
(voir p 7, comment commander).Blocs à sorties différentes. (Utiliser des brides réduites)
Do not use this male metric threaded for new constructions.The references refer to the blocks alone without gaskets. To obtainblocks equipped :
metric screws - UNC screws - BUNA o'rings - VITON o'rings FLS o'rings - stainless steel blocks (see p 7, how to order).
CODE 61
20
BLOCS/BLOCKSISO 6162 - 1
SAE 3000
BLOCS "X"
1013192532
38
51
64
76
3/8"1/2"3/4"1"1"1/4
1"1/2
2"
2"1/2
3"
M8M8M10M10M12M10M14M12M14M12M14M12M16
5/16"3/8"3/8"
7/16"
1/2"
1/2"
1/2"5/8"
1215202532
38
47
58
70
5254667080
95
110
120
140
60688295
110
120
120
130
160
0,91,21,82,4
3,8
6,4
7,0
7,614,0
4146536073
83
100
110
131
35,0038,1047,6052,4058,70
69,85
77,80
88,90
106,40
16,5017,5022,2026,2030,20
35,70
42,90
50,80
61,90
ND SIZE
DN TAILLE A O C FF Q± 0,25
GG± 0,25
Z Z
VISSERIE
SCREWS
TYPE 1métrique TYPE 2 UNC
C100101C100151C100201C100251C100321C600321C100401C600401C100501C600501C100651C600651C100801
REFERENCEMASSEkg
WEIGHT
"X" BLOCKS
BLOCS "T"
1013192532
38
51
64
76
3/8"1/2"3/4"1"1"1/4
1"1/2
2"
2"1/2
3"
M8M8M10M10M12M10M14M12M14M12M14M12M16
5/16"3/8"3/8"
7/16"
1/2"
1/2"
1/2"5/8"
1215192532
38
47
58
70
5254707080
95
110
120
140
50,056,068,580,095,0
110,0
110,0
123,0
150,0
0,70,91,52,1
3,3
5,1
6,9
8,814,8
4146546073
83
100
110
131
35,0038,1047,6052,4058,70
69,85
77,80
88,90
106,40
16,5017,5022,2026,2030,20
35,70
42,90
50,80
61,90
ND SIZE
DN TAILLE A
2832384857
67
58
68
83
B O C FF Q± 0,25
GG± 0,25
Z Z
VISSERIE
SCREWS
TYPE 1métrique TYPE 2 UNC
T100101T100151T100201T100251T100321T600321T100401T600401T100501T600501T100651T600651T100801
REFERENCEMASSEkg
WEIGHT
"T" BLOCKS
étrique ne doit pas être utilisé pour de nouvelles conceptions. Les références s'entendent pour des blocs nus en acier, sans vis et sans joint, pour des livraisons avec :
visserie métrique - visserie UNC - joint PERBUNAN joint VITON - joints FLS - blocs inox
Blocs à sorties différentes (Utiliser des brides réduites).
Do not use this male metric threaded for new constructions.The references refer to the blocks alone without gaskets. To obtainblocks equipped :
metric screws - UNC screws - BUNA o'rings - VITON o'rings FLS o'rings - stainless steel blocks
GG
A
C
B
QO
3 fois 4 trous ØZ
GGFF
Q
GG
Q
GGFF
Q
GG
A
C
QO
4 fois 4 trous ØZ
CODE 61
21
BRIDES/FLANGESISO 6162 - 2
SAE 6000
BRIDES DE FIXATION BW PORT ASSEMBLY FLANGES BW
13
19
25
32
38
51
1/2"
3/4"
1"
1"1/4
1"1/2
2"
400 bars
400 bars
400 bars
400 bars
400 bars
400 bars
20 à 22
25 à 28
30 à 35
38 à 45
48 à 52
60 à 65
22
28
35
44
51
65
45
50
55
60
65
70
13
18
22
29
35
43
18,2
23,8
27,8
31,8
36,5
44,5
40,5
50,8
57,2
66,6
79,3
96,8
48
60
70
78
95
114
56
71
81
95
113
133
M8
M10
M12
M14
M12
M16
M20
30
35
45
50
45
55
70
5/16"
3/8"
7/16"
1/2"
5/8"
3/4"
1"1/4
1"1/2
1"3/4
1"3/4
2"1/4
2"3/4
0,4
0,7
1,0
1,6
2,4
4,1
113530151
113530201
113530251
113530321
163530321
113530401
113530501
ND SIZE WORKINGPRESSURE
DN TAILLE PRESSIONUTILISATION
BAR
Ø EXTERIEURDU TUBE
VISSERIE MASSEkg
REFERENCEBRIDE
MONOBLOC
H1 L A GG± 0,25
Q± 0,25
FF O
WZWZ,MM GAZ, SCHD,
ENOTHGIEWSWERCSDO EBUTPIECE FLANGE
étrique ne doit pas être utilisé pour de nouvelles conceptions.Brides standard livrées avec visserie métrique,joints Perbunan 90 shores. Pour des ensembles avec :
collets réduit collets sans gorge brides inox collets inox visserie UNC joints FLS joints viton joints EPDM 1/2 brides
Do not use this male metric threaded for new constructions.
90 shore o'rings.
reducing necks
UNC screws FLS o'rings viton o'rings EPDM o'rings
ONE PIECE FLANGEBRIDE MONOBLOC
SPLIT FLANGE1/2 BRIDE
GGFF
Q O
GGFF
Q O
L
A
WZ
H1
TYPE 1métrique TYPE 2 UNC
CODE 62
22
BRIDES/FLANGESISO 6162 - 2
SAE 6000
13
19
25
32
38
51
1/2"
3/4"
1"
1"1/4
1"1/2
2"
400 bars
400 bars
400 bars
400 bars
400 bars
400 bars
20 à 22
25 à 28
30 à 35
38 à 45
48 à 52
60 à 65
22
28
35
44
51
65
90
100
110
120
130
140
13
18
22
29
35
43
18,2
23,8
27,8
31,8
36,5
44,5
40,5
50,8
57,2
66,6
79,3
96,8
48
60
70
78
95
114
56
71
81
95
113
133
M8
M10
M12
M14
M12
M16
M20
45
50
65
70
70
80
100
5/16"
3/8"
7/16"
1/2"
5/8"
3/4"
1"3/4
2"
2"1/2
2"3/4
3"1/4
4"
0,7
1,3
2,0
3,0
4,7
9,1
213530151
213530201
213530251
213530321
263530321
213530401
213530501
ND SIZE WORKINGPRESSURE
DN TAILLE PRESSIONUTILISATION
BAR
Ø EXTERIEURDU TUBE
VISSERIE MASSEkg
REFERENCEBRIDE
MONOBLOC
H1 L A GG± 0,25
Q± 0,25
FF O
WZWZ,MM GAZ, SCHD,
ENOTHGIEWSWERCSDO EBUTPIECE FLANGE
étrique ne doit pas être utilisé pour de nouvelles conceptions.Brides standard livrées avec visserie métrique,joints Perbunan 90 shores. Pour des ensembles avec :
collets réduit brides inox collets inox visserie UNC joints FLS joints viton joints EPDM 1/2 brides
Do not use this male metric threaded for new constructions.
90 shore o'rings.
UNC screws FLS o'rings viton o'rings EPDM o'rings
TYPE 1métrique TYPE 2 UNC
ONE PIECE FLANGEBRIDE MONOBLOC
GGFF
Q O
L
W
Z
AH
1
BRIDES DE LIAISON BW UNION ASSEMBLY FLANGES BW
CODE 62
23
BRIDES/FLANGESISO 6162 - 2
SAE 6000
BRIDES PRISE DE PRESSION
13
19
25
32
38
51
1/2"
3/4"
1"
1"1/4
1"1/2
2"
400 bars
400 bars
400 bars
400 bars
400 bars
400 bars
ND SIZE WORKINGPRESSURE
DN TAILLE PRESSIONUTILISATION
BAR Z W Z W
24
30
30
34
35
40
14
19
22
29
35
43
18,2
23,8
27,8
31,8
36,5
44,5
40,5
50,8
57,2
66,6
79,3
96,8
50
60
70
80
95
114
56
71
81
95
113
133
M8
M10
M12
M14
M12
M16
M20
5/16"
3/8"
7/16"
1/2"
5/8"
3/4"
0,6
0,8
1,0
1,6
2,8
4,6
N13660153
N13660203
N13660253
N13660323
N63660323
N13660403
N13660503
VISSERIE MASSEkg
REFERENCEBRIDESEULE
L A GG± 0,25
Q± 0,25
FF O
SCREWS WEIGHT
140130151
140130201
140130251
140130321
140630321
140130401
140130501
REFERENCEAVEC PRISE
DE PRESSION
étrique ne doit pas être utilisé pour de nouvelles conceptions.Brides standard livrées avec visserie métrique,joints Perbunan 90 shores. Pour des ensembles avec :
prise de pression taraudée NPT brides inox Prise à clapet (sur demande).
Do not use this male metric threaded for new constructions.
90 shore o'rings.
TYPE 1métrique TYPE 2 UNC
TEST PORT FLANGESREF. FOR
FLANGE ONLYREF. FOR
FLANGE EQUIPED
FLANGE WITH TEST FITTINGBRIDE AVEC PRISE DE PRESSION
CODE 62
24
BRIDES/FLANGESISO 6162 - 2
SAE 6000
BRIDES DE FIXATION TYPE "C" SOCKET WELDING INTEGRAL PORT ASSEMBLY FLANGES TYPE "C" INTEGRAL SW
20,5
21,7
22,5
25,7
27,3
28,7
34,0
35,5
112500151
112500152
112500153
112500201
112500202
112500203
112500251
112500252
13
19
25
1/2"
3/4"
1"
380 bars
380 bars
380 bars
20
22
25
28
35
21,25
26,75
33,50
21,34
26,68
33,40
18,2
23,8
27,8
40,5
50,8
57,2
48
60
70
56
71
81
M8
M10
M12
30
35
45
32
40
48
13
13
16
60
68
75
13
19
22
5/16"
3/8"
7/16"
1"1/4
1"1/2
1"3/4
0,5
0,8
1,3
ND SIZE WORKINGPRESSURE
DN TAILLE PRESSIONUTILISATION
BAR
Ø EXTERIEURDU TUBE
VISSERIE MASSEkg
REFERENCE1/2 BRIDE
I1 I2 K L A GG± 0,25
Q± 0,25
FF O
MM Z W Z WGAZ SCHD
TUBE OD SCREWS WEIGHT SPLIT FLANGE
TYPE "C"TYPE "C"
SPLIT FLANGE1/2 BRIDE
GGFF
Q O
L
A
W
Z
KI1
I2
TYPE 1métrique TYPE 2 UNC
Brides standard livrées avec visserie métrique,joints Perbunan 90 shores. Pour des ensembles avec :
collets sans gorge brides inox collets inox visserie UNC joints FLS joints viton joints EPDM
Les ensembles Socket welding Intégral type "C"sont montés avec des 1/2 brides
90 shore o'rings.
UNC screws FLS o'rings viton o'rings EPDM
The Integral Socket Welding Flanges type "C"
CODE 62
25
BRIDES/FLANGESISO 6162 - 2
SAE 6000
BRIDES DE FIXATION TYPE "D" SOCKET WELDING REDUIT PORT ASSEMBLY FLANGES TYPE "D" REDUCING SW
16,317,718,520,521,725,527,330,532,534,035,530,532,534,035,538,540,542,84950,8
113510151113510152113510201113510202113510203113510251113510252113510321113510322113510323113510324163510321163510322163510323163510324113510401113510402113510403113510501113510502
13
19
25
32
38
51
1/2"
3/4"
1"
1"1/4
1"1/2
2"
380 bars
380 bars
380 bars
300 bars
300 bars
300 bars
16
1820
25
3032
353032
35384042
50
16,75
21,25
26,75
33,50
33,50
42,2548,25
17,14
21,34
26,68
33,40
33,40
42,1648,26
18,2
23,8
27,8
31,8
36,5
44,5
40,5
50,8
57,2
66,6
79,3
96,8
48
60
70
78
95
114
56
71
81
95
113
133
M8
M10
M12
M14
M12
M16
M20
30
35
45
50
45
55
70
24
32
38
44
51
67
13
13
13
16
18
20
35
40
45
50
55
65
11
13
18
22
29
35
5/16"
3/8"
7/16"
1/2"
5/8"
3/4"
1"1/4
1"1/2
1"3/4
1"3/4
2"1/4
2"3/4
0,4
0,7
1,0
1,5
2,4
4,1
ND SIZE WORKINGPRESSURE
DN TAILLE PRESSIONUTILISATION
BAR
Ø EXTERIEURDU TUBE
VISSERIE MASSEkg
REFERENCEBRIDE
MONOBLOC
I1 I2 K L A GG± 0,25
Q± 0,25
FF O
MM Z W Z WGAZ SCHD
TUBE OD SCREWS WEIGHT ONEPIECE FLANGE
TYPE "D"TYPE "D"
ONE PIECE FLANGEBRIDE MONOBLOC
GGFF
Q O
L
A
WZ
K
I2I1
TYPE 1métrique TYPE 2 UNC
SPLIT FLANGE1/2 BRIDE
GGFF
Q O
étrique ne doit pas être utilisé pour de nouvelles conceptions.Brides standard livrées avec visserie métrique,joints Perbunan 90 shores. Pour des ensembles avec :
collets sans gorge brides inox collets inox visserie UNC joints FLS joints viton joints EPDM 1/2 brides
Do not use this male metric threaded for new constructions.
90 shore o'rings.
UNC screws FLS o'rings viton o'rings EPDM o'rings
CODE 62
26
BRIDES/FLANGESISO 6162 - 2
SAE 6000
TYPE "D"TYPE "D"
ONE PIECE FLANGEBRIDE MONOBLOC
GGFF
Q O
L
A
K
I2I1
W
Z
étrique ne doit pas être utilisé pour de nouvelles conceptions.Brides standard livrées avec visserie métrique,joints Perbunan 90 shores. Pour des ensembles avec :
brides inox collets inox visserie UNC joints FLS joints viton joints EPDM
Do not use this male metric threaded for new constructions.
90 shore o'rings.
UNC screws FLS o'rings viton o'rings EPDM o'rings
BRIDES DE LIAISON TYPE "D" SOCKET WELDING REDUIT UNION ASSEMBLY FLANGES TYPE "D" REDUCING SW
16,317,718,520,521,725,527,330,532,534,035,530,532,534,035,538,540,542,84950,8
213510151213510152213510201213510202213510203213510251213510252213510321213510322213510323213510324263510321263510322263510323263510324213510401213510402213510403213510501213510502
13
19
25
32
38
51
1/2"
3/4"
1"
1"1/4
1"1/2
2"
380 bars
380 bars
380 bars
300 bars
300 bars
300 bars
16
1820
25
3032
353032
35384042
50
16,75
21,25
26,75
33,50
33,50
42,2548,25
17,14
21,34
26,68
33,40
33,40
42,1648,26
18,2
23,8
27,8
31,8
36,5
44,5
40,5
50,8
57,2
66,6
79,3
96,8
48
60
70
78
95
114
56
71
81
95
113
133
M8
M10
M12
M14
M12
M16
M20
45
50
65
70
70
80
100
24
32
38
44
51
67
13
13
13
16
18
20
70
80
90
100
110
130
11
13
18
22
29
35
5/16"
3/8"
7/16"
1/2"
5/8"
3/4"
1"3/4
2"
2"1/2
2"3/4
3"1/4
4"
0,7
1,3
2,0
2,9
5,3
7,8
ND SIZE WORKINGPRESSURE
DN TAILLE PRESSIONUTILISATION
BAR
Ø EXTERIEURDU TUBE
VISSERIE MASSEkg
REFERENCEBRIDE
MONOBLOC
I1 I2 K L A GG± 0,25
Q± 0,25
FF O
MM Z W Z WGAZ SCHD
TUBE OD SCREWS WEIGHT ONEPIECE FLANGE
TYPE 1métrique TYPE 2 UNC
CODE 62
27
BRIDES/FLANGESISO 6162 - 2
SAE 6000
ONE PIECE FLANGEBRIDE MONOBLOC
SPLIT FLANGE1/2 BRIDE
BRIDES DE FIXATION AVEC OBTURATEUR PORT ASSEMBLY FLANGES WITH PLUGS
13
19
25
32
38
51
1/2"
3/4"
1"
1"1/4
1"1/2
2"
400 bars
400 bars
400 bars
400 bars
400 bars
400 bars
19
22
26
31
34
41
18,2
23,8
27,8
31,8
36,5
44,5
40,5
50,8
57,2
66,6
79,3
96,8
48
60
70
78
95
114
56
71
81
95
113
133
M8
M10
M12
M14
M12
M16
M20
30
35
45
50
45
55
70
5/16"
3/8"
7/16"
1/2"
5/8"
3/4"
1"1/4
1"1/2
1"3/4
1"3/4
2"1/4
2"3/4
0,3
0,6
1
1,5
2,4
4,1
113570151
113570201
113570251
113570321
163570321
113570401
113570501
ND SIZE WORKINGPRESSURE
DN TAILLE PRESSIONUTILISATION
BAR
Ø EXTERIEURDU TUBE
VISSERIE MASSEkg
REFERENCEBRIDE
MONOBLOC
H1 L A GG± 0,25
Q± 0,25
FF O
WZWZ,MM GAZ, SCHD,
ENOTHGIEWSWERCSDO EBUTPIECE FLANGE
étrique ne doit pas être utilisé pour de nouvelles conceptions.Brides standard livrées avec visserie métrique,joints Perbunan 90 shores. Pour des ensembles :
obturateur sans gorge brides inox obturateur inox visserie UNC joints FLS joints viton joints EPDM 1/2 brides
Do not use this male metric threaded for new constructions.
90 shore o'rings.
plugs without groove
stainless steel plugs UNC screws FLS o'rings viton o'rings EPDM o'rings
GGFF
Q O
GGFF
Q O
L
W
Z
TYPE 1métrique TYPE 2 UNC
CODE 62
28
BRIDES/FLANGESISO 6162 - 2
SAE 6000
BRIDES MONOBLOC TARAUDEES. BSP CYLINDRIQUE,NPT PORT ASSEMBLY FLANGES : FEMALE THREADED BSPP, NPTG
GFF
Q
Oétrique ne doit pas être utilisé
pour de nouvelles conceptions.Brides standard livrées avec visserie métrique,joints Perbunan 90 shores. Pour des ensembles :
brides sans gorge brides inox visserie UNC joints FLS joints viton joints EPDM
Do not use this male metric threaded for new constructions.
90 shore o'rings.
UNC screws FLS o'rings viton o'rings EPDM o'rings
13
19
25
32
38
51
1/2"
3/4"
1"
1"1/4
1"1/2
2"
350 bars
350 bars
350 bars
250 bars
250 bars
200 bars
3/8"
1/2"
1/2"
3/4"
3/4"
1"
1"
1"1/4
1"
1"1/4
1"1/4
1"1/2
1"1/2
2"
16
21
25
27
30
37
19
19
22
23
26
30
13
13
19
19
25
25
32
25
32
32
38
38
51
18,2
23,8
27,8
31,8
36,5
44,5
40,5
50,8
57,2
66,6
79,3
96,8
46
55
65
78
94
114
54
71
81
95
112
134
M8
M10
M12
M14
M12
M16
M20
30
35
45
50
45
55
70
5/16"
3/8"
7/16"
1/2"
5/8"
3/4"
1"1/4
1"1/2
1"3/4
1"3/4
2"1/4
2"3/4
0,4
0,7
1
1,5
2,3
3,7
113590151
113590152
113590201
113590202
113590251
113590252
113590321
113590322
163590321
163590322
113590401
113590402
113590501
113590502
ND SIZE WORKINGPRESSURE
DN TAILLE PRESSIONUTILISATION
BAR
TARAUDAGEF
VISSERIE MASSEkg
REFERENCENPT
113580151
113580152
113580201
113580202
113580251
113580252
113580321
113580322
163580321
163580322
113580401
113580402
113580501
113580502
REFERENCEBSP
CYLINDRIQUE
H K A GG± 0,25
Q± 0,25
FF O
Z W Z W
TPNTHGIEWSWERCSGNIPPAT BSPP
TYPE 1métrique TYPE 2 UNC
W
H
K
T
Z
A
CODE 62
29
BRIDES/FLANGESISO 6162 - 2
SAE 6000
BRIDES DE FIXATION AVEC EMBOUT FILETE. BSP CONIQUE, NPT PORT ASSEMBLY FLANGES WITH MALE THREADED STUDS
13
19
25
32
38
51
1/2"
3/4"
1"
1"1/4
1"1/2
2"
350 bars
350 bars
350 bars
250 bars
250 bars
200 bars
1/2"
3/4"
1"
1"1/4
1"1/2
2"
55
60
70
75
90
110
19
27
32
36
42
50
13
18
22
29
35
43
18,2
23,8
27,8
31,8
36,5
44,5
40,5
50,8
57,2
66,6
79,3
96,8
48
60
70
78
95
114
56
71
81
95
113
133
M8
M10
M12
M14
M12
M16
M20
30
35
45
50
45
55
70
5/16"
3/8"
7/16"
1/2"
5/8"
3/4"
1"1/4
1"1/2
1"3/4
1"3/4
2"1/4
2"3/4
0,4
0,6
1,1
1,6
2,6
4,2
113550151
113550201
113550251
113550321
163550321
113550401
113550501
ND SIZE WORKINGPRESSURE
DN TAILLE PRESSIONUTILISATION
BAR
FILETAGE F
VISSERIE MASSEkg
REFERENCEBRIDE MONO
NPT
113540151
113540201
113540251
113540321
163540321
113540401
113540501
REFERENCEBRIDE MONO BSP CONIQ.
L P/Plats
A GG± 0,25
Q± 0,25
FF O
Z W Z W
ECEIP NOTHGIEWSWERCSDEDAERHTFLANGE
ON PIECEFLANGE
étrique ne doit pas être utilisé pour de nouvelles conceptions.La bride DN 10 (3/8) est livrée en acier étiré.Brides standard livrées avec visserie métrique,joints Perbunan 90 shores. Pour des ensembles avec :
collets sans gorge brides inox collets inox visserie UNC joints FLS joints viton joints EPDM 1/2 brides
Do not use this male metric threaded for new constructions.
90 shore o'rings.
UNC screws FLS o'rings viton o'rings EPDM o'rings
ONE PIECE FLANGEBRIDE MONOBLOC
SPLIT FLANGE1/2 BRIDE
GGFF
Q O
GGFF
Q O
L
A
W
F
ZP/Plats
TYPE 1métrique TYPE 2 UNC
CODE 62
30
BRIDES/FLANGESISO 6162 - 2
SAE 6000
BRIDES DE FIXATION AVEC EMBOUT FILETE. BSP CYLINDRIQUE PORT ASSEMBLY FLANGES. MALE THREADED BSPP
13
19
25
32
38
51
1/2"
3/4"
1"
1"1/4
1"1/2
2"
350 bars
350 bars
350 bars
250 bars
250 bars
200 bars
1/2"
3/4"
1"
1"1/4
1"1/2
2"
60
60
65
70
80
85
19
27
32
38
46
60
12
18
22
29
34
43
18,2
23,8
27,8
31,8
36,5
44,5
40,5
50,8
57,2
66,6
79,3
96,8
48
60
70
78
95
114
56
71
81
95
113
133
M8
M10
M12
M14
M12
M16
M20
30
35
45
50
45
55
70
5/16"
3/8"
7/16"
1/2"
5/8"
3/4"
1"1/4
1"1/2
1"3/4
1"3/4
2"1/4
2"3/4
0,4
0,6
1,0
1,6
1,5
2,6
4,3
112560151
112560201
112560251
112560321
162560321
112560401
112560501
ND SIZE WORKINGPRESSURE
DN TAILLE PRESSIONUTILISATION
BAR
FILETAGE BSP CYLINDRIQUE
F
VISSERIE MASSEkg
REFERENCE1/2 BRIDE
L P/Plats
A GG Q± 0,25
FF± 0,25
O
Z W Z W
TILPSTHGIEWSWERCSDEDAERHTFLANGE
étrique ne doit pas être utilisé pour de nouvelles conceptions.Brides standard livrées avec visserie métrique,joints Perbunan 90 shores. Pour des ensembles avec :
collets sans gorge brides inox collets inox visserie UNC joints FLS joints viton joints EPDM
Do not use this male metric threaded for new constructions.
90 shore o'rings.
UNC screws FLS o'rings viton o'rings EPDM o'rings
SPLIT FLANGE1/2 BRIDE
GGFF
Q OAFL
P/Plats
montage possibleavec bride monobloc
montage possibleavec bride monobloc
TYPE 1métrique TYPE 2 UNC
D
E
14,0
16,5
18,0
18,0
22,0
25,0
1
1
1
1
1
1
D E
CODE 62
31
BLOCS/BLOCKSISO 6162 - 2
SAE 6000
BLOCS EQUERRES
13192532
3851
1/2"3/4"1"1"1/4
1"1/22"
14192229
3543
56,068,580,095,0
110,0135,0
50657298
98116
58708398
115135
658090
100
130150
1,12,23,4
5,28,5
14,2
M8M10M12M14M12M16M20
M8M10M12M14M12M16M20
5/16"3/8"7/16"
1/2"5/8"3/4"
5/16"3/8"7/16"
1/2"5/8"3/4"
2"1/23"1/43"1/2
4"5"6"
18,2523,8027,7531,75
36,5044,45
40,5050,8057,1566,70
79,4096,80
E130151E130201E130251E130321E630321E130401E130501
ND SIZE
DN TAILLE A D GG± 0,25
Q± 0,25
FF O
31354455
6180
X
30,032,540,049,0
49,564,0
Y REFERENCEMASSEkg
WEIGHT
Z W Z W
VISSERIE
SCREWS
TYPE 1métrique TYPE 2 UNCZ1 Z1
TARAUDAGE
TAPPING
métrique UNC
PORT ELBOW
BLOCS "L"
13192532
3851
1/2"3/4"1"1"1/4
1"1/22"
M8M10M12M14M12M16M20
5/16"3/8"7/16"1/2"
5/8"3/4
14192229
3543
58738398
115130
56668095
110135
1,12,13,25,2
8,312,5
50627280
98116
18,2523,8027,7531,75
36,5044,45
40,5050,8057,1566,70
79,4096,80
ND SIZE
DN TAILLE A O C FF GG± 0,25
Q± 0,25
Z Z
VISSERIE
SCREWS
TYPE 1métrique TYPE 2 UNC
L130151L130201L130251L130321L630321L130401L130501
REFERENCEMASSEkg
WEIGHT
"L" BLOCKS
GGFF
Q
GG
A
C
QO
2 fois 4 trous ØZ
D
F
A
A
O Z1
4 Vis CHc ØZLgW
GGFF Q
GG
Vue suivant F
étrique ne doit pas être utilisé pour de nouvelles conceptions. Les références s'entendent pour des blocs nus en acier, sans vis et sans joint, pour des livraisons avec :
visserie métrique - visserie UNC - joint PERBUNAN joint VITON - joints FLS - blocs inox
Blocs à sorties différentes (Utiliser des brides réduites).
Do not use this male metric threaded for new constructions.The references refer to the blocks alone without gaskets. To obtainblocks equipped :
metric screws - UNC screws - BUNA o'rings - VITON o'rings FLS o'rings - stainless steel blocks
X
Y
CODE 62
32
BLOCS/BLOCKSISO 6162 - 2
SAE 6000
BLOCS "X"
13192532
3851
1/2"3/4"1"1"1/4
1"1/22"
M8M10M12M14M12M16M20
5/16"3/8"7/16"
1/2"5/8"3/4"
14192229
3543
58738398
115135
688294
110
130140
1,22,43,7
5,79,0
12,0
50627280
98116
40,5050,8057,1566,70
79,4096,80
18,2523,8027,7531,75
36,5044,45
ND SIZE
DN TAILLE A
72
B O C FF Q± 0,25
GG± 0,25
Z Z
VISSERIE
SCREWS
TYPE 1métrique TYPE 2 UNC
C130151C130201C130251C130321C630321C130401C130501
REFERENCEMASSEkg
WEIGHT
"X" BLOCKS
BLOCS "T"
13192532
3851
1/2"3/4"1"1"1/4
1"1/22"
M8M10M12M14M12M16M20
5/16"3/8"7/16"
1/2"5/8"3/4"
14192529
3544
58708098
115130
56,068,588,595,0
110,0128,5
1,11,93,1
4,87,8
12,0
50637380
98117
18,2523,8027,7531,75
36,5044,45
40,5050,8057,1566,70
79,4096,80
ND SIZE
DN TAILLE A O C FF GG± 0,25
Q± 0,25
Z Z
VISSERIE
SCREWS
TYPE 1métrique TYPE 2 UNC
T130151T130201T130251T130321T630321T130401T130501
REFERENCEMASSEkg
WEIGHT
"T" BLOCKS
étrique ne doit pas être utilisé pour de nouvelles conceptions. Les références s'entendent pour des blocs nus en acier, sans vis et sans joints, pour des livraisons avec :
visserie métrique - visserie UNC - joint PERBUNAN joint VITON - joints FLS - blocs inox
Blocs à sorties différentes (Utiliser des brides réduites).
Do not use this male metric threaded for new constructions.The references refer to the blocks alone without gaskets. To obtainblocks equipped :
metric screws - UNC screws - BUNA o'rings - VITON o'rings FLS o'rings - stainless steel blocks
GG
A
C
QO
3 fois 4 trous ØZ
GGFF
Q
GG
Q
GGFF
Q
GG
A
C
QO
4 fois 4 trous ØZ
CODE 62
33
ISO 6164 - 1BRIDES/FLANGESPN 250 / CETOP
ONE PIECE FLANGEBRIDE MONOBLOC
BRIDES DE FIXATION BW PORT ASSEMBLY FLANGES BW
10
13
19
25
32
38
51
56
63
70
80
3/8"
1/2"
3/4"
1"
1"1/4
1"1/2
2"
2"1/2
3"
3"1/2
4"
250 bars
250 bars
250 bars
250 bars
250 bars
250 bars
250 bars
250 bars
250 bars
250 bars
250 bars
40
45
50
55
60
65
70
75
85
90
100
12
13
19
25
32
38
47
58
70
77
90
24,7
29,7
35,3
43,8
51,6
60,0
69,4
83,4
102,5
24,7
29,7
35,4
43,8
51,6
60,1
69,3
83,4
102,5
113,1
123,7
40
45
50
65
75
85
100
120
140
160
170
M6
M8
M8
M10
M12
M14
M16
M20
M20
M24
M24
25
30
30
35
45
50
55
70
75
90
100
0,2
0,3
0,4
0,7
1,1
1,6
2,4
4,2
6,1
10,4
13,0
121530101
121530151
121530201
121530251
121530321
121530401
121530501
121530651
121530801
121530901
121531001
114530101
114530151
114530201
114530251
114530321
114530401
114530501
114530651
114530801
ND SIZE WORKINGPRESSURE
DN TAILLE PRESSIONUTILISATION
BAR
VISSERIE MASSEkg
REFERENCEBRIDE MONOBLOC
L
18
22
28
35
43
50
62
76
90
102
118
H1 A GG ± 0,25 O
Z W PN 250 CETOPPN 250 CETOP
SCREWS WEIGHT ONEPIECE FLANGE
Brides standard livrées avec visserie métrique,joints Perbunan 90 shores. Pour des ensembles avec :
collets sans gorge collets réduits brides inox collets inox joints FLS joints viton joints EPDM
90 shore o'rings.
FLS o'rings viton o'rings EPDM o'rings
PN 250/CETOP
L
A
WZ
H1
OGG
GG O
14 à 17,14
18 à 22
25 à 28
30 à 35
38 à 42,25
48 à 50
60 à 63
75 à 80
88 à 90
95 à 101,60
113 à 120
Ø EXTERIEURDU TUBE
MM, GAZ, SCHD,
TUBE OD
Pour les brides sidérurgie "S", sur demande
34
ISO 6164 - 1BRIDES/FLANGESPN 250 / CETOP
ONE PIECE FLANGEBRIDE MONOBLOC
BRIDES DE LIAISON BW UNION ASSEMBLY FLANGES BW
10
13
19
25
32
38
51
56
63
70
80
3/8"
1/2"
3/4"
1"
1"1/4
1"1/2
2"
2"1/2
3"
3"1/2
4"
250 bars
250 bars
250 bars
250 bars
250 bars
250 bars
250 bars
250 bars
250 bars
250 bars
250 bars
14 à 17,14
18 à 22
25 à 28
30 à 35
38 à 42,25
48 à 50
60 à 63
75 à 80
88 à 90
95 à 101,60
113 à 120
18
22
28
35
43
50
62
76
90
102
118
80
90
100
110
120
130
140
150
170
180
200
12
13
19
25
32
38
47
58
70
77
90
24,7
29,7
35,3
43,8
51,6
60,0
69,4
83,4
102,5
24,7
29,7
35,4
43,8
51,6
60,1
69,3
83,4
102,5
113,1
123,7
40
45
50
65
75
85
100
120
140
160
170
M6
M8
M8
M10
M12
M14
M16
M20
M20
M24
M24
35
40
45
50
60
70
75
100
110
130
130
0,4
0,5
0,7
1,4
2,1
3,1
4,7
8,0
12,3
20,1
25,5
221530101
221530151
221530201
221530251
221530321
221530401
221530501
221530651
221530801
221530901
221531001
214530101
214530151
214530201
214530251
214530321
214530401
214530501
214530651
214530801
ND SIZE WORKINGPRESSURE
DN TAILLE PRESSIONUTILISATION
BAR
Ø EXTERIEURDU TUBE
VISSERIE MASSEkg
REFERENCEBRIDE MONOBLOC
H1 L A GG ± 0,25 O
POTEC052 NPWZ,MM PN 250 CETOPGAZ, SCHD,
ENOTHGIEWSWERCSDO EBUTPIECE FLANGE
PN 250/CETOP
OGG
GG OH1
L
W
Z
A
Brides standard livrées avec visserie métrique,joints Perbunan 90 shores. Pour des ensembles avec :
collets réduits brides inox collets inox joints FLS joints viton joints EPDM
90 shore o'rings.
FLS o'rings viton o'rings EPDM o'rings
Pour les brides sidérurgie "S", sur demandebrides "brise jet" BW, sur demande
35
ISO 6164 - 1BRIDES/FLANGESPN 250 / CETOP
ONE PIECE FLANGEBRIDE MONOBLOC
OGG
GG O
BRIDES DE FIXATION TYPE "D" SOCKET WELDING REDUIT PORT ASSEMBLY FLANGES TYPE "D" REDUCING SW
16,317,718,520,521,725,527,330,532,534,035,538,540,542,84950,86165,8747780,8
13
19
25
32
38
51
56
63
1/2"
3/4"
1"
1"1/4
1"1/2
2"
2"1/2
3"
225 bars
225 bars
225 bars
200 bars
200 bars
200 bars
150 bars
100 bars
16
1820
25
3032
35384042
506065
80
16,75
21,25
26,75
33,50
42,2548,25
60,30
76,10
17,14
21,34
26,68
33,4
42,1648,26
60,30
73,02
29,7
35,3
43,8
51,6
60,0
69,4
83,4
102,5
29,7
35,4
43,8
51,6
60,1
69,3
83,4
102,5
45
50
65
75
85
100
120
140
M8
M8
M10
M12
M14
M16
M20
M20
30
30
35
45
50
55
70
75
0,3
0,4
0,8
1,2
1,7
2,6
4,4
6,6
114510151114510152114510201114510202114510203114510251114510252114510321114510322114510323114510324114510401114510402114510403114510501114510502114510651114510652114510801114510802114510803
121510151121510152121510201121510202121510203121510251121510252121510321121510322121510323121510324121510401121510402121510403121510501121510502121510651121510652121510801121510802121510803
24
31,8
38
43
50
62
74
90
13
13
13
16
18
20
22
25
35
40
45
50
55
65
75
85
12
15
20
25
32
38
47
58
ND SIZE WORKINGPRESSURE
DN TAILLE PRESSIONUTILISATION
BAR
Ø EXTERIEURDU TUBE
I1 I2 K L A GG ± 0,25 O
MM GAZ SCHD
TUBE OD SCREWS WEIGHT ONE PIECE FLANGE
L
A
WZ
L
A
WZ
K
I2I1
PN 250 CETOP
VISSERIE MASSEkg
REFERENCEBRIDE MONOBLOC
Z W PN 250 CETOPPN 250/CETOP
Brides standard livrées avec visserie métrique,joints Perbunan 90 shores. Pour des ensembles avec :
collets sans gorge collets réduits brides inox collets inox joints FLS joints viton joints EPDM
90 shore o'rings.
FLS o'rings viton o'rings EPDM o'rings
Pour les brides sidérurgie "S", sur demande
36
ISO 6164 - 1BRIDES/FLANGESPN 250 / CETOP
ONE PIECE FLANGEBRIDE MONOBLOC
OGG
GG O
BRIDES DE FIXATION TYPE "D" SOCKET WELDING REDUIT PORT ASSEMBLY FLANGES TYPE "D" REDUCING SW
16,317,718,520,521,725,527,330,532,534,035,538,540,542,849,050,861,065,874,077,080,8
13
19
25
32
38
51
56
63
1/2"
3/4"
1"
1"1/4
1"1/2
2"
2"1/2
3"
225 bars
225 bars
225 bars
200 bars
200 bars
200 bars
150 bars
100 bars
16
1820
25
3032
35384042
506065
80
16,75
21,25
26,75
33,50
42,2548,25
60,30
76,10
17,14
21,34
26,68
33,4
42,1648,26
60,30
73,02
29,7
35,3
43,8
51,6
60,0
69,4
83,4
102,5
29,7
35,4
43,8
51,6
60,1
69,3
83,4
102,5
45
50
65
75
85
100
120
140
M8
M8
M10
M12
M14
M16
M20
M20
40
45
50
60
70
75
100
110
0,5
0,8
1,5
2,3
3,2
5,0
8,5
12,8
214510151214510152214510201214510202214510203214510251214510252214510321214510322214510323214510324214510401214510402214510403214510501214510502214510651214510652214510801214510802214510803
221510151221510152221510201221510202221510203221510251221510252221510321221510322221510323221510324221510401221510402221510403221510501221510502221510651221510652221510801221510802221510803
24,0
31,8
38,0
43,0
50,0
62,0
74,0
90,0
13
13
13
16
18
20
22
25
70
80
90
100
110
130
150
170
12
15
20
25
32
38
47
58
ND SIZE WORKINGPRESSURE
DN TAILLE PRESSIONUTILISATION
BAR
Ø EXTERIEURDU TUBE
I1 I2 K L A GG ± 0,25 O
MM GAZ SCHD
TUBE OD SCREWS WEIGHT ONE PIECE FLANGE
PN 250 CETOP
VISSERIE MASSEkg
REFERENCEBRIDE MONOBLOC
Z W PN 250 CETOPPN 250/CETOP
L
A
W
Z
K
I2I1
Brides standard livrées avec visserie métrique,joints Perbunan 90 shores. Pour des ensembles avec :
brides inox collets inox joints FLS joints viton joints EPDM (voir p 7, comment commander).
90 shore o'rings.
FLS o'rings viton o'rings EPDM o'rings (see p 7, how to order).
Pour les brides sidérurgie "S", sur demande
ON REQUESTLIAISON SW INTEGRALTYPE "P" SUR DEMANDE
37
ISO 6164 - 1BRIDES/FLANGESPN 250 / CETOP
ONE PIECE FLANGEBRIDE MONOBLOC
BRIDES DE FIXATION TYPE "C" SOCKET WELDING INTEGRAL PORT ASSEMBLY FLANGES TYPE "C" INTEGRAL SW
20,521,725,527,330,532,534,035,538,540,543,049,050,461,065,874,077,081,090,5
13
19
25
32
38
51
56
63
1/2"
3/4"
1"
1"1/4
1"1/2
2"
2"1/2
3"
225 bars
225 bars
225 bars
200 bars
200 bars
200 bars
150 bars
100 bars
20
25
3032
3538404248506065
8090
21,25
26,75
33,50
42,2548,25
60,30
76,10
21,34
26,68
33,40
42,1648,26
60,32
73,02
88,90
29,7
35,3
43,8
51,6
60,0
69,4
83,4
102,5
29,7
35,4
43,8
51,6
60,1
69,3
83,4
102,5
45
50
65
75
85
100
120
140
M8
M8
M10
M12
M14
M16
M20
M20
30
30
35
45
50
55
70
75
0,4
0,5
1,0
1,5
2,0
3,2
4,9
7,9
114500151114500152114500201114500202114500251114500252114500253114500254114500321114500322114500323114500401114500402114500501114500502114500651114500652114500653114500801
121500151121500152121500201121500202121500251121500252121500253121500254121500321121500322121500323121500401121500402121500501121500502121500651121500652121500653121500801
30
35
44
55
63
79
98
116
13
13
16
18
20
22
24
28
75
80
90
105
115
125
135
150
15
20
25
32
38
47
58
70
ND SIZE WORKINGPRESSURE
DN TAILLE PRESSIONUTILISATION
BAR
Ø EXTERIEURDU TUBE
I1 I2 K L A GG ± 0,25 O
MM GAZ SCHD
TUBE OD SCREWS WEIGHT ONE PIECE FLANGE
PN 250 CETOP
VISSERIE MASSEkg
REFERENCEBRIDE MONOBLOC
Z W PN 250 CETOPPN 250/CETOP
Brides standard livrées avec visserie métrique,joints Perbunan 90 shores. Pour des ensembles avec :
collets sans gorge brides inox collets inox joints FLS joints viton joints EPDM
90 shore o'rings.
FLS o'rings viton o'rings EPDM o'rings
Pour les brides sidérurgie "S", sur demande
A I1 I2
W
L
K
Z
OGG
GG O
38
ISO 6164 - 1BRIDES/FLANGESPN 250 / CETOP
ONE PIECE FLANGEBRIDE MONOBLOC
BRIDES MONOBLOC TARAUDEES. BSP CYLINDRIQUE,NPT PORT ASSEMBLY FLANGES : FEMALE THREADED BSPP, NPT
10
13
19
25
32
38
51
3/8"
1/2"
3/4"
1"
1"1/4
1"1/2
2"
250 bars
250 bars
250 bars
250 bars
150 bars
150 bars
150 bars
1/4"
3/8"
3/8"
1/2"
1/2"
3/4"
3/4"
1"
1"
1"1/4
1"1/4
1"1/2
1"1/2
2"
13
13
13
15
15
18
18
20
20
22
22
24
24
26
40
45
50
65
75
85
100
24,7
29,7
35,3
43,8
51,6
60,0
69,4
24,7
29,7
35,4
43,8
51,6
60,1
69,3
M6
M8
M8
M10
M12
M14
M16
30
35
40
45
50
55
60
0,2
0,3
0,5
0,8
1,2
1,6
2,6
121580101
121580102
121580151
121580152
121580201
121580202
121580251
121580252
121580321
121580322
121580401
121580402
121580501
121580502
114580101
114580102
114580151
114580152
114580201
114580202
114580251
114580252
114580321
114580322
114580401
114580402
114580501
114580502
ND SIZE WORKINGPRESSURE
DN TAILLE PRESSIONUTILISATION
BAR
TARAUDAGET
VISSERIE MASSEkg
REFERENCEBSPP CYLIND.
K O GG ± 0,25
Z W PN 250 CETOPPN 250 CETOP
PPSBTHGIEWSWERCSGNIPPAT
121590101
121590102
121590151
121590152
121590201
121590202
121590251
121590252
121590321
121590322
121590401
121590402
121590501
121590502
114590101
114590102
114590151
114590152
114590201
114590202
114590251
114590252
114590321
114590322
114590401
114590402
114590501
114590502
REFERENCENPT
PN 250 CETOP
NPT
PN 250/CETOP
OGG
GG O
K
T
Brides standard livrées avec visserie métrique,joints Perbunan 90 shores. Pour des ensembles avec :
brides sans gorge brides inox joints FLS joints viton joints EPDM
90 shore o'rings.
FLS o'rings viton o'rings EPDM o'rings
Pour les brides sidérurgie "S", sur demande
39
ISO 6164 - 1BRIDES/FLANGESPN 250 / CETOP
ONE PIECE FLANGEBRIDE MONOBLOC
BRIDES DE FIXATION AVEC EMBOUT FILETE. BSP CONIQUE, NPT PORT ASSEMBLY FLANGES WITH MALE THREADED STUDS
OGG
GG O
W
Z
W
ZP/Plats
W
Z
L
AW
Z
F
10
13
19
25
32
38
51
3/8"
1/2"
3/4"
1"
1"1/4
1"1/2
2"
250 bars
250 bars
250 bars
250 bars
150 bars
150 bars
150 bars
3/8"
1/2"
3/4"
1"
1"1/4
1"1/2
2"
11
13
18
24
30
36
44
50
55
60
70
75
90
95
15
19
27
30
38
42
50
40
45
50
65
75
85
100
24,7
29,7
35,3
43,8
51,6
60,0
69,4
24,7
29,7
35,4
43,8
51,6
60,1
69,3
M6
M8
M8
M10
M12
M14
M16
25
30
30
35
45
50
55
0,2
0,3
0,5
0,8
1,3
1,8
2,7
121540101
121540151
121540201
121540251
121540321
121540401
121540501
114540101
114540151
114540201
114540251
114540321
114540401
114540501
ND SIZE WORKINGPRESSURE
DN TAILLE PRESSIONUTILISATION
BAR
FILETAGEF
VISSERIE MASSEkg
REFERENCEBSPP CONIQ.
AP/Plats
L O GG ± 0,25
Z W PN 250 CETOPPN 250 CETOP
PSBTHGIEWSWERCSDEDAERHT
121550101
121550151
121550201
121550251
121550321
121550401
121550501
114550101
114550151
114550201
114550251
114550321
114550401
114550501
REFERENCENPT
PN 250 CETOP
NPT
PN 250/CETOP
Brides standard livrées avec visserie métrique,joints Perbunan 90 shores. Pour des ensembles avec :
collets sans gorge brides inox collets inox joints FLS joints viton joints EPDM
90 shore o'rings.
FLS o'rings viton o'rings EPDM o'rings
Pour les brides sidérurgie "S", sur demande
40
ISO 6164 - 1BRIDES/FLANGESPN 250 / CETOP
ONE PIECE FLANGEBRIDE MONOBLOC
BRIDES DE FIXATION AVEC OBTURATEUR PORT ASSEMBLY FLANGES WITH PLUGS
10
13
19
25
32
38
51
56
63
70
80
3/8"
1/2"
3/4"
1"
1"1/4
1"1/2
2"
2"1/2
3"
3"1/2
4"
250 bars
250 bars
250 bars
250 bars
250 bars
250 bars
250 bars
250 bars
250 bars
250 bars
250 bars
15
15
16
18
18
18
18
35
24
45
55
40
45
50
65
75
85
100
120
140
160
170
24,7
29,7
35,3
43,8
51,6
60,0
69,4
83,4
102,5
24,7
29,7
35,4
43,8
51,6
60,1
69,3
83,4
102,5
113,1
123,7
M6
M8
M8
M10
M12
M14
M16
M20
M20
M24
M24
25
30
30
35
45
50
55
70
80
90
100
0,2
0,3
0,4
0,7
1,0
1,5
2,2
4,3
5,8
10,8
13,6
121570101
121570151
121570201
121570251
121570321
121570401
121570501
121570651
121570801
121570901
121571001
114570101
114570151
114570201
114570251
114570321
114570401
114570501
114570651
114570801
ND SIZE WORKINGPRESSURE
DN TAILLE PRESSIONUTILISATION
BAR
VISSERIE MASSEkg
REFERENCEBRIDE MONOBLOC
L O GG ± 0,25
POTEC052 NPWZPN 250 CETOP
SCREWS WEIGHT ONEPIECE FLANGE
PN 250/CETOP
OGG
GG O
WWWWZ
L
Brides standard livrées avec visserie métrique,joints Perbunan 90 shores. Pour des ensembles avec :
obturateurs sans gorge brides inox obturateurs inox joints FLS joints viton joints EPDM
90 shore o'rings.
plugs without groove
stainless steel plugs FLS o'rings viton o'rings EPDM o'rings
Pour les brides sidérurgie "S", sur demande
41
ISO 6164 - 1 BLOCS/BLOCKSPN 250/CETOP
Les références s'entendent pour des blocs nus en acier, sans vis et sans joint, pour des livraisons avec :
visserie métrique - joint PERBUNAN joint VITON - joints FLS - blocs inox
Blocs à sorties différentes (Utiliser des brides réduites).
The references refer to the blocks alone without gaskets. To obtainblocks equipped :
metric screws - BUNA o'rings - VITON o'rings FLS o'rings - stainless steel blocks
Pour les blocs L, équerresSidérurgie "S" sur demande.For "S" blocks, on request
GGO
GG
O
4 Trous Ø Z1
CFA
4 Vis Chc Ø Z Lg W
GG
GG
Vue suivant F
GG
GG
O
O GG
GGC
A
2 fois 4 Trous Ø ZBLOCS "L"
13192532385156637080
1/2"3/4"1"1"1/41"1/22"2"1/23"3"1/24"
M8M8M10M12M14M16M20M20
15202532384760717790
4550657585
100120140160170
56668095
110125160180205225
ND SIZE
DN TAILLE A O C
29,735,343,851,660,069,483,4
102,5
PN250GG
± 0,2529,735,443,851,660,169,383,4
102,5113,1123,7
CETOPGG
± 0,25 ZM8M8M10M12M14M16M20M20M24M24
Z
VISSERIE
SCREWS
PN250/CETOP
L210151L210201L210251L210321L210401L210501L210651L210801L210901L211001
REFERENCECETOP
L140151L140201L140251L140321L140401L140501L140651L140801
REFERENCEPN 250
0,81,12,13,34,87,3
13,022,032,038,0
MASSEkg
WEIGHT
"L" BLOCKS
BLOCS EQUERRES
1319253238515663
1/2"3/4"1"1"1/41"1/22"2"1/23"
M8M8M10M12M14M16M20M20
60658090
110130150170
1520253238476071
4550657585
100120140
607085
100115130170190
ND SIZE
DN TAILLE A O C
29,735,343,851,660,069,483,4
102,5
PN250GG
± 0,2529,735,443,851,660,169,383,4
102,5
CETOPGG
± 0,25 Z/Z1 W
VISSERIE
SCREWS
PN250/CETOP
E210151E210201E210251E210321E210401E210501E210651E210801
REFERENCECETOP
E140151E140201E140251E140321E140401E140501E140651E140801
REFERENCEPN 250
0,91,11,63,63,55,1
14,513,4
MASSEkg
WEIGHT
PORT ELBOW BLOCKS
42
ISO 6164 - 1BLOCS/BLOCKSPN 250/ CETOP
Les références s'entendent pour des blocs nus en acier, sans vis et sans joint, pour des livraisons avec :
visserie métrique - joint PERBUNAN joint VITON - joints FLS - blocs inox
Blocs à sorties différentes (Utiliser des brides réduites).
The references refer to the blocks alone without gaskets. To obtainblocks equipped :
metric screws - BUNA o'rings - VITON o'rings FLS o'rings - stainless steel blocks
GG
GG
O
O A
GG
GG
C
4 fois 4 Trous Ø Z
GG
GG
OGG
GGO GG
GGC
A
3 fois 4 Trous Ø Z
BLOCS "X"
13192532385156637080
1/2"3/4"1"1"1/41"1/22"2"1/23"3"1/24"
M8M8M10M12M14M16M20M20
15202532384760717790
4550657585
100120140160170
678294
110130150200220250270
ND SIZE
DN TAILLE A O C
29,735,343,851,660,069,483,4
102,5
PN250GG
± 0,2529,735,443,851,660,169,383,4
102,5113,1123,7
CETOPGG
± 0,25 ZM8M8M10M12M14M16M20M20M24M24
Z
VISSERIE
SCREWS
PN250/CETOP
C210151C210201C210251C210321C210401C210501C210651C210801C210901C211001
REFERENCECETOP
C140151C140201C140251C140321C140401C140501C140651C140801
REFERENCEPN 250
0,81,12,33,65,28,3
15,019,036,040,0
MASSEkg
WEIGHT
"X" BLOCKS
BLOCS "T"
13192532385156637080
1/2"3/4"1"1"1/41"1/22"2"1/23"3"1/24"
M8M8M10M12M14M16M20M20
15202532384760717790
4550657585
100120140160170
56668095
110125160180205225
ND SIZE
DN TAILLE A O C
29,735,343,851,660,069,483,4
102,5
PN250GG
± 0,2529,735,443,851,660,169,383,4
102,5113,1123,7
CETOPGG
± 0,25 ZM8M8M10M12M14M16M20M20M24M24
Z
VISSERIE
SCREWS
PN250/CETOP
T210151T210201T210251T210321T210401T210501T210651T210801T210901T211001
REFERENCECETOP
T140151T140201T140251T140321T140401T140501T140651T140801
REFERENCEPN 250
0,71,02,23,14,57,0
12,019,030,035,0
MASSEkg
WEIGHT
"T" BLOCKS
Pour les blocs X,TSidérurgie "S" sur demande.For "S" blocks, on request.
43
ISO 6164 - 2BRIDES/FLANGESPN 400 / CETOP
ONE PIECE FLANGEBRIDE MONOBLOC
BRIDES DE FIXATION BW PORT ASSEMBLY FLANGES BW
10
13
19
25
32
38
51
56
63
70
80
3/8"
1/2"
3/4"
1"
1"1/4
1"1/2
2"
2"1/2
3"
3"1/2
4"
400 bars
400 bars
400 bars
400 bars
400 bars
400 bars
400 bars
400 bars
400 bars
400 bars
400 bars
40
45
50
55
60
65
70
80
90
90
110
11
13
18
22
29
35
43
53
58
63
74
24,7
29,7
35,3
43,8
51,6
60,0
69,4
83,4
102,5
102,5
123,7
24,7
29,7
35,4
43,8
51,6
60,1
40
45
50
65
75
85
100
120
140
140
160
M6
M8
M8
M10
M12
M14
M16
M20
M20
M20
M24
25
30
35
40
50
60
65
80
90
90
110
0,2
0,4
0,5
0,9
1,3
2,0
3,2
5,4
8,6
10,7
12,8
124530101
124530151
124530201
124530251
124530321
124530401
116530101
116530151
116530201
116530251
116530321
116530401
116530501
116530651
116530801
116530901
116531001
ND SIZE WORKINGPRESSURE
DN TAILLE PRESSIONUTILISATION
BAR
VISSERIE MASSEkg
REFERENCEBRIDE MONOBLOC
L
17,5
22,0
28,0
35,0
44,0
51,0
65,0
80,0
90,0
102,0
114,0
H1 A GG ± 0,25 O
Z W PN 400 CETOPPN 400 CETOP
SCREWS WEIGHT ONEPIECE FLANGE
Brides standard livrées avec visserie métrique,joints Perbunan 90 shores. Pour des ensembles avec :
collets sans gorge collets réduits brides inox collets inox joints FLS joints viton joints EPDM
90 shore o'rings.
FLS o'rings viton o'rings EPDM o'rings
PN 400/CETOP
L
A
W
Z
H1
OGG
GG O
16 à 18
20 à 22
25 à 28
30 à 35
38 à 45
48 à 52
60 à 65
75 à 80
88 à 90
90 à 102
110 à 120
Ø EXTERIEURDU TUBE
MM, GAZ, SCHD,
TUBE OD
44
ISO 6164 - 2BRIDES/FLANGESPN 400 / CETOP
ONE PIECE FLANGEBRIDE MONOBLOC
BRIDES DE LIAISON BW UNION ASSEMBLY FLANGES BW
10
13
19
25
32
38
51
56
63
70
80
3/8"
1/2"
3/4"
1"
1"1/4
1"1/2
2"
2"1/2
3"
3"1/2
4"
400 bars
400 bars
400 bars
400 bars
400 bars
400 bars
400 bars
400 bars
400 bars
400 bars
400 bars
16 à 18
20 à 22
25 à 28
30 à 35
38 à 45
48 à 52
60 à 65
75 à 80
88 à 90
90 à 102
110 à 120
17,5
22
28
35
44
51
65
80
90
102
114
80
90
100
110
120
130
140
160
180
180
220
11
13
18
22
29
35
43
53
58
63
74
24,7
29,7
35,3
43,8
51,6
60,0
69,4
83,4
102,5
102,5
113,2
24,7
29,7
35,4
43,8
51,6
60,0
40
45
50
65
75
85
100
120
140
140
160
M6
M8
M8
M10
M12
M14
M16
M20
M20
M20
M24
45
50
55
60
75
80
110
110
150
150
150
0,4
0,6
1,0
1,7
2,5
3,8
6,2
10,3
16,6
24,3
26,3
224530101
224530151
224530201
224530251
224530321
224530401
216530101
216530151
216530201
216530251
216530321
216530401
216530501
216530651
216530801
216530901
216531001
ND SIZE WORKINGPRESSURE
DN TAILLE PRESSIONUTILISATION
BAR
Ø EXTERIEURDU TUBE
VISSERIE MASSEkg
REFERENCEBRIDE MONOBLOC
H1 L A GG ± 0,25 O
POTEC004 NPWZ,MM PN 400 CETOPGAZ, SCHD,
ENOTHGIEWSWERCSDO EBUTPIECE FLANGE
Brides standard livrées avec visserie métrique,joints Perbunan 90 shores. Pour des ensembles avec :
brides inox collets réduits collets inox joints FLS joints viton joints EPDM
Brides "brise jet" BW sur demande
90 shore o'rings.
FLS o'rings viton o'rings EPDM o'rings
PN 400/CETOP
OGG
GG OH1
L
W
Z
A
45
ISO 6164 - 2BRIDES/FLANGESPN 400 / CETOP
16,3
17,7
18,5
20,5
21,7
25,5
27,3
30,5
32,5
34,0
35,5
38,5
40,5
42,8
49,0
50,8
13
19
25
32
38
51
1/2"
3/4"
1"
1"1/4
1"1/2
2"
380 bars
380 bars
380 bars
300 bars
300 bars
300bars
16
18
20
25
30
32
35
38
40
42
50
16,75
21,25
26,75
33,50
42,25
48,25
17,14
21,34
26,68
33,4
42,16
48,26
29,7
35,3
43,8
51,6
60,0
69,4
29,7
35,4
43,8
51,6
60,1
45
50
65
75
85
120
M8
M8
M10
M12
M14
M16
50
55
60
75
80
110
0,6
1,0
1,7
2,5
4,4
6,2
216510151
216510152
216510201
216510202
216510203
216510251
216510252
216510321
216510322
216510323
216510324
216510401
216510402
216510403
216510501
216510502
224510151
224510152
224510201
224510202
224510203
224510251
224510252
224510321
224510322
224510323
224510324
224510401
224510402
224510403
24
31,8
38
44
51
67
13
13
13
16
18
20
70
80
90
100
110
130
11
14
19
22
29
35
ND SIZE WORKINGPRESSURE
DN TAILLE PRESSIONUTILISATION
BAR
Ø EXTERIEURDU TUBE
I1 I2 K L A GG ± 0,25 O
MM GAZ SCHD
TUBE OD SCREWS WEIGHT ONE PIECE FLANGE
PN 400 CETOP
VISSERIE MASSEkg
REFERENCEBRIDE MONOBLOC
Z W PN 400 CETOPPN 400/CETOP
ONE PIECE FLANGEBRIDE MONOBLOC
OGG
GG O
BRIDES DE FIXATION TYPE "D" SOCKET WELDING REDUIT PORT ASSEMBLY FLANGES TYPE "D" REDUCING SW
L
AW
Z
K
I2I1
Brides standard livrées avec visserie métrique,joints Perbunan 90 shores. Pour des ensembles avec :
brides inox collets inox joints FLS joints viton joints EPDM
90 shore o'rings.
FLS o'rings viton o'rings EPDM o'rings
46
ISO 6164 - 2BRIDES/FLANGESPN 400 / CETOP
ONE PIECE FLANGEBRIDE MONOBLOC
BRIDES MONOBLOC TARAUDEES. BSP CYLINDRIQUE,NPT PORT ASSEMBLY FLANGES : FEMALE THREADED BSPP, NPT
10
13
19
25
32
38
51
3/8"
1/2"
3/4"
1"
1"1/4
1"1/2
2"
350 bars
350 bars
350 bars
350 bars
250 bars
250 bars
200 bars
1/4"
3/8"
3/8"
1/2"
1/2"
3/4"
3/4"
1"
1"
1"1/4
1"1/4
1"1/2
1"1/2
2"
13
13
13
15
15
18
18
20
20
22
22
24
24
27
40
45
50
65
75
85
100
24,7
29,7
35,3
43,8
51,6
60,0
69,4
24,7
29,7
35,4
43,8
51,6
60,1
M6
M8
M8
M10
M12
M14
M16
30
40
45
50
55
60
70
0,2
0,4
0,5
0,9
1,1
1,8
3,3
124580101
124580102
124580151
124580152
124580201
124580202
124580251
124580252
124580321
124580322
124580401
124580402
116580101
116580102
116580151
116580152
116580201
116580202
116580251
116580252
116580321
116580322
116580401
116580402
116580501
116580502
ND SIZE WORKINGPRESSURE
DN TAILLE PRESSIONUTILISATION
BAR
TARAUDAGET
VISSERIE MASSEkg
REFERENCEBSPP CYLIND.
K O GG ± 0,25
Z W PN 400 CETOPPN 400 CETOP
PPSBTHGIEWSWERCSGNIPPAT
124590101
124590102
124590151
124590152
124590201
124590202
124590251
124590252
124590321
124590322
124590401
124590402
116590101
116590102
116590151
116590152
116590201
116590202
116590251
116590252
116590321
116590322
116590401
116590402
116590501
116590502
REFERENCENPT
PN 400 CETOP
NPT
PN 400/CETOP
OGG
GG O
K
T
Brides standard livrées avec visserie métrique,joints Perbunan 90 shores. Pour des ensembles avec :
brides sans gorge brides inox joints FLS joints viton joints EPDM
90 shore o'rings.
FLS o'rings viton o'rings EPDM o'rings
47
ISO 6164 - 2BRIDES/FLANGESPN 400 / CETOP
ONE PIECE FLANGEBRIDE MONOBLOC
BRIDES DE FIXATION AVEC EMBOUT FILETE. BSP CONIQUE, NPT PORT ASSEMBLY FLANGES WITH MALE THREADED STUDS
OGG
GG O
W
Z
W
ZP/Plats
W
Z
L
AW
Z
F
10
13
19
25
32
38
51
3/8"
1/2"
3/4"
1"
1"1/4
1"1/2
2"
350 bars
350 bars
350 bars
350 bars
250 bars
250 bars
200 bars
3/8"
1/2"
3/4"
1"
1"1/4
1"1/2
2"
11
13
18
22
29
35
43
50
55
60
70
75
90
90
15
19
27
30
36
42
50
40
45
50
65
75
85
100
24,7
29,7
35,3
43,8
51,6
60,1
69,4
24,7
29,7
35,4
43,8
51,6
60,1
M6
M8
M8
M10
M12
M14
M16
25
30
35
40
50
55
65
0,2
0,4
0,5
0,9
1,4
2,1
3,4
124540101
124540151
124540201
124540251
124540321
124540401
116540101
116540151
116540201
116540251
116540321
116540401
116540501
ND SIZE WORKINGPRESSURE
DN TAILLE PRESSIONUTILISATION
BAR
FILETAGEF
VISSERIE MASSEkg
REFERENCEBSPP CONIQ.
AP/Plats
L O GG ± 0,25
Z W PN 400 CETOPPN 400 CETOP
PPSBTHGIEWSWERCSDEDAERHT
124550101
124550151
124550201
124550251
124550321
124550401
116550101
116550151
116550201
116550251
116550321
116550401
116550501
REFERENCENPT
PN 400 CETOP
NPT
PN 400/CETOP
Brides standard livrées avec visserie métrique,joints Perbunan 90 shores. Pour des ensembles avec :
collets sans gorge brides inox collets inox joints FLS joints viton joints EPDM
90 shore o'rings.
FLS o'rings viton o'rings EPDM o'rings
48
ISO 6164 - 2BRIDES/FLANGESPN 400 / CETOP
BRIDES DE FIXATION AVEC OBTURATEUR PORT ASSEMBLY FLANGES WITH PLUGS
10
13
19
25
32
38
51
56
63
3/8"
1/2"
3/4"
1"
1"1/4
1"1/2
2"
2"1/2
3"
400 bars
400 bars
400 bars
400 bars
400 bars
400 bars
400 bars
400 bars
400 bars
18
19
22
26
31
34
46
56
61
40
45
50
65
75
85
100
120
140
24,7
29,7
35,3
43,8
51,6
60,0
69,4
83,4
102,5
24,7
29,7
35,4
43,8
51,6
60,1
M6
M8
M8
M10
M12
M14
M16
M20
M20
25
30
35
40
50
55
65
90
90
0,2
0,3
0,4
0,9
1,3
1,9
3,3
5,4
8,7
124570101
124570151
124570201
124570251
124570321
124570401
116570101
116570151
116570201
116570251
116570321
116570401
116570501
116570651
116570801
ND SIZE WORKINGPRESSURE
DN TAILLE PRESSIONUTILISATION
BAR
VISSERIE MASSEkg
REFERENCEBRIDE MONOBLOC
L O GG ± 0,25
POTEC004 NPWZPN 400 CETOP
SCREWS WEIGHT ONEPIECE FLANGE
PN 400/CETOP
Brides standard livrées avec visserie métrique,joints Perbunan 90 shores. Pour des ensembles avec :
obturateurs sans gorge brides inox obturateurs inox joints FLS joints viton joints EPDM
90 shore o'rings.
plugs without groove
stainless steel plugs FLS o'rings viton o'rings EPDM o'rings
ONE PIECE FLANGEBRIDE MONOBLOC
49
ISO 6164 - 2BLOCS/BLOCKSPN 400/CETOP
Les références s'entendent pour des blocs nus en acier, sans vis et sans joint, pour des livraisons avec :
visserie métrique - joint PERBUNAN joint VITON - joints FLS - blocs inox
Blocs à sorties différentes (Utiliser des brides réduites).
The references refer to the blocks alone without gaskets. To obtainblocks equipped :
metric screws - BUNA o'rings - VITON o'rings FLS o'rings - stainless steel blocks
GGO
GG
O
4 Trous Ø Z1
CFA
4 Vis Chc Ø Z Lg W
GG
GG
Vue suivant F
GG
GG
O
O GG
GGC
A
2 fois 4 Trous Ø ZBLOCS "L"
101319253238515663
3/8"1/2"3/4"1"1"1/41"1/22"2"1/23"
M6M8M8M10M12M14M16M20M20
M6M8M8M10M12M14
111418222935435358
404550657585
100120140
5560668095
110125150170
ND SIZE
DN TAILLE A O C
24,729,735,343,851,660,069,483,4
102,5
PN400GG
± 0,2524,729,735,443,851,660,1
CETOPGG
± 0,25 Z Z
VISSERIE
SCREWS
PN400/CETOP
L240101L240151L240201L240251L240321L240401
REFERENCECETOP
L160101L160151L160201L160251L160321L160401L160501L160651L160801
REFERENCEPN 400
0,70,81,12,13,34,87,3
13,021,0
MASSEkg
WEIGHT
"L" BLOCKS
BLOCS EQUERRES
101319253238515663
3/8"1/2"3/4"1"1"1/41"1/22"2"1/23"
111418222935435358
5560668095
110125150170
404550657585
100120140
50606580
100110130150170
0,60,81,12,33,65,07,9
14,222,0
M6M8M8M10M12M14M16M20M20
M6M8M8M10M12M14
50606580
100110
24,729,735,343,851,660,069,483,4
102,5
24,729,735,443,851,660,1
E240101E240151E240201E240251E240321E240401
ND SIZE
004 NPCAELLIATNDGG
± 0,25
CETOPGG
± 0,25
O REFERENCECETOP
E160101E160151E160201E160251E160321E160401E160501E160651E160801
REFERENCEPN 400
MASSEkg
WEIGHT
Z1/Z W Z1/Z W
VISSERIE
SCREWS
PN 400 CETOP
PORT ELBOW BLOCKS
50
ISO 6164 - 2BLOCS/BLOCKSPN 400/ CETOP
Les références s'entendent pour des blocs nus en acier, sans vis et sans joint, pour des livraisons avec :
visserie métrique - joint PERBUNAN joint VITON - joints FLS - blocs inox
Blocs à sorties différentes (Utiliser des brides réduites).
The references refer to the blocks alone without gaskets. To obtainblocks equipped :
metric screws - BUNA o'rings - VITON o'rings FLS o'rings - stainless steel blocks
GG
GG
O
O A
GG
GG
C
4 fois 4 Trous Ø Z
GG
GG
OGG
GGO GG
GGC
A
3 fois 4 Trous Ø Z
BLOCS "X"
101319253238515663
3/8"1/2"3/4"1"1"1/41"1/22"2"1/23"
M6M8M8M10M12M14M16M20M20
111418222935435358
404550657585
100120140
60678294
110130150200220
ND SIZE
DN TAILLE A O C
24,729,735,343,851,660,069,483,4
102,5
PN400GG
± 0,2524,729,735,443,851,660,1
CETOPGG
± 0,25 PN400M6M8M8M10M12M14
CETOP
VISSERIEZ
SCREWS
C240101C240151C240201C240251C240321C240401
REFERENCECETOP
C160101C160151C160201C160251C160321C160401C160451C160501C160651
REFERENCEPN400
0,60,81,22,53,65,39,0
16,022,0
MASSEkg
WEIGHT
"X" BLOCKS
BLOCS "T"
101319253238515663
3/8"1/2"3/4"1"1"1/41"1/22"2"1/23"
M6M8M8M10M12M14M16M20M20
M6M8M8M10M12M14
111418222935435358
404550657585
100120140
5560668095
110125150170
ND SIZE
DN TAILLE A O C
24,729,735,343,851,660,069,483,4
102,5
PN400GG
± 0,2524,729,735,443,851,660,1
CETOPGG
± 0,25 PN400 CETOP
VISSERIEZ
SCREWS
T240101T240151T240201T240251T240321T240401
REFERENCECETOP
T160101T160151T160201T160251T160321T160401T160501T160651T160801
REFERENCEPN 400
0,60,71,02,13,54,67,3
12,426,0
MASSEkg
WEIGHT
"T" BLOCKS
51
COMPOSANTS COMMUNSCOMMON COMPONENTS
ISO 6162 -1 / 6164 -1SAE 3000
PN 250/ CETOP
PLUGOBTURATEUR
THREADED FLANGED HEADCOLLET FILET
This plug be used with
The standard, carbon steelFor stainless steel components
Cet obturateur se monte sur la bridecarrée PN 250Standard, livré en acier :Pour des composants en inox
OBTURATEURS PLUGS
10
13
19
25
32
38
51
64
76
89
102
ND
DN
3/8"
1/2"
3/4"
1"
1"1/4
1"1/2
2"
2"1/2
2"1/2
3"
3"1/2
4"
SIZE
TAILLE
24,5
30,2
38,1
44,4
50,8
60,3
71,4
84,0
87,2
101,6
114,3
131,0
C
18,0
24,0
31,5
38,0
43,0
50,0
62,0
74,0
76,0
90,0
102,0
118,0
H
15
15
16
18
18
18
18
21
21
24
45
55
L
P13210101
P13210151
P13210201
P13210251
P13210321
P13210401
P13210501
P13210651
P13210653
P13210801
P13210901
P13211001
REFERENCESANS
GORGE
WITHOUTGROOVE
N13210101
N13210151
N13210201
N13210251
N13210321
N13210401
N13210501
N13210651
N13210653
N13210801
N13210901
N13211001
REFERENCEAVEC
GORGE
AREGROOVED
COLLET FILETÉ BSP CONIQUE NPT THREADED FLANGED HEAD
10
13
19
25
32
38
51
ND
DN
3/8"
1/2"
3/4"
1"
1"1/4
1"1/2
2"
THREADED
FILETAGEF
24,5
30,2
38,1
44,4
50,8
60,3
71,4
C
11
13
18
24
30
36
44
A
15
19
27
30
38
42
50
P/Plats
50
55
60
70
75
90
95
L
P9210101
P9210151
P9210201
P9210251
P9210321
P9210401
P9210501
REFERENCEBSP CO.
S. GORGE
WITHOUTGROOVE
N9210101
N9210151
N9210201
N9210251
N9210321
N9210401
N9210501
REFERENCEBSP CO.
A. GORGE
AREGROOVED
P10210101
P10210151
P10210201
P10210251
P10210321
P10210401
P10210501
REFERENCENPT
S. GORGE
WITHOUTGROOVE
N10210101
N10210151
N10210201
N10210251
N10210321
N10210401
N10210501
REFERENCENPT
A. GORGE
AREGROOVED
CODE 61
52
FLANGED HEAD SWCOLLET SW INTEGRAL
REDUCING FLANGED HEAD SWSOCKET WELDING REDUIT
This stud could be used with
The standard, carbon steelFor stainless steel components
Ce collet se monte sur la bridecarrée PN 250Standard, livré en acier
Les collets Socket Welding IntegralType "C" ne peuvent se monter qu'avecdes 1/2 brides ISO 6162 (SAE 3000).Dans le cas de montage avec des bridesmonoblocs, utiliser l'adapteur SocketWelding rapporté et soudé sur un collet
TYPE "C" COLLET SW INTEGRAL FLANGED HEAD SW
20,521,725,527,330,532,534,035,538,540,543,049,050,461,065,874,077,081,090,5
13
19
25
32
38
51
64
76
1/2"
3/4"
1"
1"1/4
1"1/2
2"
2"1/2
3"
20
25
3032
3538404248506065
8090
21,25
26,75
33,50
42,2548,25
60,30
76,10
21,34
26,68
33,40
42,1648,26
60,32
73,02
88,90
N7210151N7210152N7210201N7210202N7210251N7210252N7210253N7210254N7210321N7210322N7210323N7210401N7210402N7210501N7210502N7210651N7210652N7210653N7210801
P7210151P7210152P7210201P7210202P7210251P7210252P7210253P7210254P7210321P7210322P7210323P7210401P7210402P7210501P7210502P7210651P7210652P7210653P7210801
30
35
44
55
63
79
98
116
15
20
25
32
38
47
58
70
13
13
16
18
20
22
24
28
30,2
38,0
44,4
50,8
60,3
71,4
84,0
101,6
ND SIZE
DN TAILLE Ø EXTERIEURDU TUBE
I1 I2 A K C
60
686875
95
100
107
130
150
L
MM GAZ SCHD
ERADO EBUTGROOVED
WITHOUTGROOVE
REFERENCEAVEC
GORGE
REFERENCESANS
GORGE
TYPE "D" COLLET SW REDUIT REDUCING FLANGED HEAD SW
16,317,718,520,521,725,527,330,532,534,035,538,540,542,849,050,861,065,861,065,874,077,080,8
13
19
25
32
38
51
64
76
1/2"
3/4"
1"
1"1/4
1"1/2
2"
2"1/2
3"
16
1820
25
3032
35384042
5060656065
80
16,75
21,25
26,75
33,50
42,2548,25
60,30
60,3060,30
76,10
17,14
21,34
26,68
33,40
42,1648,26
60,30
73,02
N8210151N8210152N8210201N8210202N8210203N8210251N8210252N8210321N8210322N8210323N8210324N8210401N8210402N8210403N8210501N8210502N8210651N8210652N8210653N8210654N8210801N8210802N8210803
P8210151P8210152P8210201P8210202P8210203P8210251P8210252P8210321P8210322P8210323P8210324P8210401P8210402P8210403P8210501P8210502P8210651P8210652P8210653P8210654P8210801P8210802P8210803
24,0
31,8
38,0
43,0
50,0
62,0
74,074,076,076,090,0
12
15
20
25
32
38
47
58
13
13
13
16
18
20
22
25
30,2
38,0
44,4
50,8
60,3
71,4
84,0
87,2
101,6
ND SIZE
DN TAILLE Ø EXTERIEURDU TUBE
I1 I2 A K C
35
40
45
50
55
65
75
85
L
MM GAZ SCHD
ERADO EBUTGROOVED
WITHOUTGROOVE
REFERENCEAVEC
GORGE
REFERENCESANS
GORGE
L
K
I2 I1 A
C
A
L
C
K
I2 I1
CODE 61
COMPOSANTS COMMUNSCOMMON COMPONENTS
ISO 6162 -1 / 6164 -1SAE 3000
PN 250/ CETOP
53
COMPOSANTS COMMUNSCOMMON COMPONENTS
ISO 6162 -1 / 6164 -1SAE 3000
PN 250/ CETOP
FLANGED HEAD BWCOLLET BW
BW ADAPTORADAPTEUR BW
COLLET BW FLANGED HEAD BW
18222835435062747690
102
114
1013192532385164
7689
102
3/8"1/2"3/4"1"1"1/41"1/22"2"1/2
3"3"1/2
4"
14 à 17,14 18 à 22 25 à 28 30 à 35 38 à 42,4 48 à 50 60 à 63 73 à 76
88 à 90100 à 102
113 à 120,00
N6210101N6210151N6210201N6210251N6210321N6210401N6210501N6210651N6210653N6210801N6210901N6210902N6211001N6211002
P6210101P6210151P6210201P6210251P6210321P6210401P6210501P6210651P6210653P6210801P6210901P6210902P6211001P6211002
1213192532384758
708990
24,530,238,144,550,860,471,484,187,2101,6114,3
131,0
ND SIZE
DN TAILLE Ø EXTERIEURDU TUBE
H1 A C
4045505560657075
8590
100
L
MM GAZ SCHD
ERADO EBUTGROOVED
WITHOUTGROOVE
REFERENCEAVEC
GORGE
REFERENCESANS
GORGE
ADAPTEUR BW BW ADAPTOR
L
H1 A
C
L
H1 A
1
A
H
This stud could be used with
For stainless steel components
Ce collet se monte sur la bridecarrée PN 250Pour des composants en inox
13
19
25
32
38
51
64
76
89
102
ND
DN
1/2" x 3/8"
3/4" x 1/2"
1" x 3/4"
1"1/4 x 1"
1"1/2 x 1"1/4
2" x 1"1/2
2"1/2 x 2"
3" x 2"1/2
3"1/2 x 3"
4" x 3"1/2
SIZE
TAILLE
22
28
35
43
50
62
74
90
102
114
H1
15
20
25
32
38
47
58
70
77
90
A1
18
22
28
35
43
50
62
74
90
102
H
12
15
20
25
32
38
47
58
70
77
A
20
30
35
45
50
55
60
65
70
70
L
N16210101
N16210151
N16210201
N16210251
N16210321
N16210401
N16210501
N16210651
N16210801
N16210901
REFERENCE
CODE 61
54
COMPOSANTS COMMUNSCOMMON COMPONENTS
ISO 6162 -1 / 6164 -1SAE 3000
PN 250/ CETOP
REDUCING FLANGED HEAD BWCOLLET REDUIT BW
COLLET REDUIT D'UN Ø BW REDUCING FLANGED HEAD BW
13
19
25
32
38
51
64
76
1/2"
3/4"
1"
1"1/4
1"1/2
2"
2"1/2
3"
14 à 17,14
18 à 22
25 à 28
30 à 35
38 à 42,4
48 à 50
60 à 63
73 à 76
18
22
28
35
43
50
62
74
76
H1
12
13
19
25
32
38
47
58
A
30,2
38,1
44,5
50,8
60,4
71,4
84,1
87,2
101,6
C
45
50
55
60
65
70
75
85
L
P14210151
P14210201
P14210251
P14210321
P14210401
P14210501
P14210651
P14210653
P14210801
P14210803
REFERENCESANS
GORGE
WITHOUTGROOVE
N14210151
N14210201
N14210251
N14210321
N14210401
N14210501
N14210651
N14210653
N14210801
N14210803
REFERENCEAVEC
GORGE
AREGROOVED
SW ADAPTORADAPTEUR SW
This stud could be used with
For stainless steel components
Ce collet se monte sur la bridecarrée PN 250Pour des composants en inox
A souder sur un collet BW de même DN
ADAPTEUR SOCKET WELDING SW ADAPTOR
ND SIZE
DN TAILLE Ø EXTERIEURDU TUBE
TUBE OD
L
H1 A C
I2 H1I1
L
K
A
222228283535353543434350506262
13
19
25
32
38
51
1/2"
3/4"
1"
1"1/4
1"1/2
2"
20
25
3032
3538404248506065
21,25
26,75
33,50
42,2548,25
60,30
21,34
26,68
33,40
42,1648,26
60,32
N15210151N15210152N15210201N15210202N15210251N15210252N15210253N15210254N15210321N15210322N15210323N15210401N15210402N15210501N15210502
151520202525252532323238384747
20,521,725,527,330,532,534,035,538,540,543,049,050,461,065,8
ND SIZE
DN TAILLE Ø EXTERIEURDU TUBE
H1 A I1
303035354444444455555563637979
I2
131313131616161618181820202222
K
303030303535353545454550505555
L
MM GAZ SCHD
TUBE OD
REFERENCE
CODE 61
55
COMPOSANTS COMMUNSCOMMON COMPONENTS
ISO 6162 -1 / 6164 -1SAE 3000
PN 250/ CETOP
BLANK FLANGED HEADCOLLET EBAUCHE
COLLET EBAUCHE BLANK FLANGED HEAD
10
13
19
25
32
38
51
64
76
89
102
ND
DN
3/8"
1/2"
3/4"
1"
1"1/4
1"1/2
2"
2"1/2
3"
3"1/2
4"
SIZE
TAILLE
11
15
20
25
32
38
47
58
70
77
90
A
24,5
30,2
38,1
44,4
50,8
60,3
71,4
84,0
87,2
101,6
114,3
131,0
C
18,0
24,0
31,5
38,0
43,0
50,0
62,0
74,0
76,0
90,0
102,0
118,0
H
40
45
50
55
60
65
70
75
85
90
100
L
P12210101
P12210151
P12210201
P12210251
P12210321
P12210401
P12210501
P12210651
P12210653
P12210801
P12210901
P12211001
REFERENCESANS
GORGE
WITHOUTGROOVE
N12210101
N12210151
N12210201
N12210251
N12210321
N12210401
N12210501
N12210651
N12210653
N12210801
N12210901
N12211001
REFERENCEAVEC
GORGE
AREGROOVED
"F" FLANGESBRIDES "F" A SOUDERSW INTEGRALE (SAE 3000)(SG) SANS GORGE DE JOINT
"F" FLANGESBRIDES "F" A SOUDERSW INTEGRALE (SAE 3000)(AG) AVEC GORGE DE JOINT
This stud could be used with
The standard, carbon steelFor stainless steel components
Ce collet se monte sur la bridecarrée PN 250Standard, livré en acier :Pour des composants en inox
BRIDES "F" A SOUDER "F" FLANGES SW INTEGRAL SAE 3000
13
19
25
32
38
51
64
76
1/2"
3/4"
1"
1"1/4
1"1/2
2"
2"1/2
3"
F1S0151F1S0152F1S0201F1S0202F1S0251F1S0252F1S0253F1S0254F1S0321F1S0322F1S0323F1S0401F1S0402F1S0501F1S0502F1S0651F1S0652F1S0653F1S0801
F1A0151F1A0152F1A0201F1A0202F1A0251F1A0252F1A0253F1A0254F1A0321F1A0322F1A0323F1A0401F1A0402F1A0501F1A0502F1A0651F1A0652F1A0653F1A0801
ND SIZE
DN TAILLE Ø EXTERIEURDU TUBE
20
25
3032
35384042
506065
8090
ECNEREFERECNEREFERMM
21,25
26,75
33,50
42,2548,25
60,30
76,10
GAZ
21,34
26,68
33,40
42,1648,26
60,32
73,02
88,90
SCHD
EGNALFDO EBUTSAE 3000
BRIDE SAE 3000 PSI"S" G "A" G
CODE 61
56
COMPOSANTS COMMUNSCOMMON COMPONENTS
ISO 6162 -1 / 6164 -1SAE 3000
PN 250/ CETOP
BRIDES MONOBLOC SAE
1013192532
38
51
64
7689
102
3/8"1/2"3/4"1"1"1/4
1"1/2
2"
2"1/2
3"3"1/24"
A10101A10151A10201A10251A10321A10322A10323A10401A10402A10501A10502A10651A10652A10801A10901A11001
M8M8M10M10M12
M10M14M12M14M12M14M12M16M16M16
5/16"3/8"3/8"
7/16"
1/2"
1/2"
1/2"5/8"5/8"5/8"
ND SIZE
DN TAILLE REFERENCEMONOBLOC
TYPE DEVISSERIE
TYPE 1 TYPE 2
SCREWS ONE PIECEFLANGE
1/2 BRIDES
13192532
38
51
64
7689
102
1/2"3/4"1"1"1/4
1"1/2
2"
2"1/2
3"3"1/24"
B10151B10201B10251B10321B10322B10323B10401B10402B10501B10502B10651B10652B10801B10901B11001
M8M10M10M12
M10M14M12M14M12M14M12M16M16M16
5/16"3/8"3/8"
7/16"
1/2"
1/2"
1/2"5/8"5/8"5/8"
ND SIZE
DN TAILLE REFERENCE1/2 BRIDE
TYPE DEVISSERIE
TYPE 1 TYPE 2
SCREWS SPLITFLANGE
CARREE PN 250/CETOP/"S"
10131925323851647689
102
3/8"1/2"3/4"1"1"1/41"1/22"2"1/23"3"1/24"
A50101A50151A50201A50251A50321A50401A50501A50651A50801
A30101A30151A30201A30251A30321A30401A30501A30651A30801A30901A31001
A70101A70151A70201A70251A70321A70401A70501A70651A70801
A71001
ND SIZE
DN TAILLE BRIDES CARREESREFERENCE
CETOP "S"052 NP
SQUARE FLANGE
JOINTS TORIQUES 90 SHORE
10131925323851647689
102
3/8"1/2"3/4"1"1"1/41"1/22"2"1/23"3"1/24"
17,12 x 2,6218,64 x 3,5324,99 x 3,5332,92 x 3,5337,69 x 3,5347,22 x 3,5356,74 x 3,5369,44 x 3,5385,32 x 3,5398,02 x 3,53
110,72 x 3,53
AFPM9K01712AFPM9N01864AFPM9N02499AFPM9N03292AFPM9N03769AFPM9N04722AFPM9N05674AFPM9N06944AFPM9N08532AFPM9N09802AFPM9N11072
ANUBEZISDN
DN TAILLE Ø INTERIEUR X Ø TORE REFERENCEVITON
ANBR9K01712ANBR9N01864ANBR9N02499ANBR9N03292ANBR9N03769ANBR9N04722ANBR9N05674ANBR9N06944ANBR9N08532ANBR9N09802ANBR9N11072
REFERENCEPERBUNAN
JOINTS TYPES "FLS"
131925323851647689
102
1/2"3/4"1"1"1/41"1/22"2"1/23"3"1/24"
19,6826,0333,9138,7348,1357,6670,4886,2396,68
111,38
25,5231,8739,7544,5753,9763,5076,3292,07
104,52117,22
FLS 0151FLS 0201FLS 0251FLS 0321FLS 0401FLS 0501FLS 0651FLS 0801FLS 0901FLS 1001
ND SIZE
DN TAILLE Ø INT. Ø EXT. REFERENCEFLS
ANBR9N01864ANBR9N02499ANBR9N03292ANBR9N03769ANBR9N04722ANBR9N05674ANBR9N06944ANBR9N08532ANBR9N09802ANBR9N11072
JOINT TORIQUEEQUIVALENTPERBUNAN
Ø INT.
Ø Tore
3 - 3
0 - 1
0 - 1
2 - 92
Ø E
XT.
CODE 61
57
COMPOSANTS COMMUNSCOMMON COMPONENTS
ISO 6162 -2 / 6164 -2SAE 6000
PN 400/ CETOP
BLANK FLANGED HEADCOLLET EBAUCHE
COLLETS EBAUCHE BLANK FLANGED HEAD
10
13
19
25
32
38
51
64
76
89
102
ND
DN
3/8"
1/2"
3/4"
1"
1"1/4
1"1/2
2"
2"1/2
3"
3"1/2
4"
SIZE
TAILLE
11
13
18
22
29
35
43
53
58
63
74
A
26,0
31,8
39,5
41,3
47,6
54,0
63,5
79,4
94,2
104,0
119,0
131,0
C
18,0
24,0
31,8
38,1
44,0
51,0
67,0
80,0
90,0
102,0
114,0
H
45
45
50
55
60
65
65
70
90
90
110
L
P12220101
P12220151
P12220201
P12220202
P12220251
P12220321
P12220401
P12220501
P12220651
P12220801
P12220901
P12221001
REFERENCESANS
GORGE
WITHOUTGROOVE
N12220101
N12220151
N12220201
N12220202
N12220251
N12220321
N12220401
N12220501
N12220651
N12220801
N12220901
N12221001
REFERENCEAVEC
GORGE
AREGROOVED
This stud could be used with
For stainless steel components
Ce collet se monte sur la bridecarrée PN 400Pour des composants en inox
A
L
CH
PLUGOBTURATEUR
OBTURATEURS PLUGS
10
13
19
25
32
38
51
64
76
89
102
ND
DN
3/8"
1/2"
3/4"
1"
1"1/4
1"1/2
2"
2"1/2
3"
3"1/2
4"
SIZE
TAILLE
26,0
31,8
39,5
41,3
47,6
54,0
63,5
79,4
94,2
104,0
119,0
131,0
C
18,0
24,0
31,8
38,1
44,0
51,0
67,0
80,0
90,0
102,0
114,0
H
18
19
22
26
31
34
41
46
56
61
61
L
P13220101
P13220151
P13220201
P13220202
P13220251
P13220321
P13220401
P13220501
P13220651
P13220801
P13220901
P13221001
REFERENCESANS
GORGE
WITHOUTGROOVE
N13220101
N13220151
N13220201
N13220202
N13220251
N13220321
N13220401
N13220501
N13220651
N13220801
N13220901
N13221001
REFERENCEAVEC
GORGE
AREGROOVED
CH
L
CODE 62
58
COMPOSANTS COMMUNSCOMMON COMPONENTS
ISO 6162 -2 / 6164 -2SAE 6000
PN 400/ CETOP
Ces embouts sont exclusivement réservésau standard ISO 6162 (SAE6000).Les collets Socket Welding Integral Type "C" ne peuvent se monter qu'avec des 1/2 brides ISO 6162 (SAE 6000). Dans le cas de montage avec des brides monoblocs, utiliser l'adaptateur Socket Welding rapporté et soudé sur un collet BW.
TYPE "C" COLLETS SOCKET WELDING INTEGRAL FLANGED HEAD SW
20,521,722,525,727,328,734,035,5
13
19
25
1/2"
3/4"
1"
20
2225
28
35
21,25
26,75
33,50
21,34
26,68
33,40
N7220151N7220152N7220153N7220201N7220202N7220203N7220251N7220252
P7220151P7220152P7220153P7220201P7220202P7220203P7220251P7220252
3232324040404848
1414141818182222
1313131313131616
31,831,831,839,539,539,547,647,6
ND SIZE
DN TAILLE Ø EXTERIEURDU TUBE
I1 I2 A K C
6060606868687575
L
MM GAZ SCHD
ERADO EBUTGROOVED
WITHOUTGROOVE
REFERENCEAVEC
GORGE
REFERENCESANS
GORGE
FLANGED HEAD SWCOLLET SW INTEGRAL
L
K
I2 I1 A
C
TYPE "D" COLLETS SW REDUIT REDUCING FLANGED HEAD SW
16,317,718,520,521,718,520,521,725,527,330,532,534,035,538,540,542,849,050,8
13
19
25
32
38
51
1/2"
3/4"
1"
1"1/4
1"1/2
2"
16
1820
1820
25
3032
35384042
50
16,75
21,25
21,2526,75
33,50
42,2548,25
17,14
21,34
21,3426,68
33,40
42,1648,26
N8220151N8220152N8220201N8220202N8220203N8220204N8220205N8220206N8220251N8220252N8220321N8220322N8220323N8220324N8220401N8220402N8220403N8220501N8220502
P8220151P8220152P8220201P8220202P8220203P8220204P8220205P8220206P8220251P8220252P8220321P8220322P8220323P8220324P8220401P8220402P8220403P8220501P8220502
24,0
31,8
38,0
44,0
51,0
67,0
12
14
18
22
29
35
13
13
13
16
18
20
31,8
39,5
41,3
47,6
54,0
63,5
79,4
ND SIZE
DN TAILLE Ø EXTERIEURDU TUBE
I1 I2 A K C
35
40
45
50
55
65
L
MM GAZ SCHD
ERADO EBUTGROOVED
WITHOUTGROOVE
REFERENCEAVEC
GORGE
REFERENCESANS
GORGE
REDUCING FLANGED HEAD SWSOCKET WELDING REDUIT
This stud could be used with
Ce collet se monte sur la bridecarrée PN 400
A
L
C
K
I2 I1
THREADED FLANGED HEADCOLLET FILETÉ
COLLETS FILETÉS BSP CONIQUE NPT THREADED FLANGED HEAD
10
13
19
25
32
38
51
ND
DN
3/8"
1/2"
3/4"
1"
1"1/4
1"1/2
2"
THREADED
FILETAGEF
3/8"
1/2"
3/4"
1"
1"1/4
1"1/2
2"
SIZE
TAILLE
26,0
31,8
39,5
41,3
47,6
54,0
63,5
79,4
C
11
13
18
22
29
35
43
A
15
19
27
32
36
42
50
P/Plats
50
55
60
70
75
90
90
L
P9220101
P9220151
P9220201
P9220202
P9220251
P9220321
P9220401
P9220501
REFERENCEBSP CO.
S. GORGE
WITHOUTGROOVE
N9220101
N9220151
N9220201
N9220202
N9220251
N9220321
N9220401
N9220501
REFERENCEBSP CO.
A. GORGE
AREGROOVED
P10220101
P10220151
P10220201
P10220202
P10220251
P10220321
P10220401
P10220501
REFERENCENPT
S. GORGE
WITHOUTGROOVE
N10220101
N10220151
N10220201
N10220202
N10220251
N10220321
N10220401
N10220501
REFERENCENPT
A. GORGE
AREGROOVED
L
P/Plats
F A C
CODE 62
59
COMPOSANTS COMMUNSCOMMON COMPONENTS
ISO 6162 -2 / 6164 -2SAE 6000
PN 400/ CETOP
FLANGED HEAD BWCOLLET BW
COLLET BW FLANGED HEAD BW
17,522,028,0
35,044,051,065,080,090,0
102,0114,0
101319
25323851647689
102
3/8"1/2"3/4"
1"1"1/41"1/22"2"1/23"3"1/24"
16 à 18 20 à 22 25 à 28 30 à 35 38 à 45 48 à 52 60 à 65 75 à 80 88 à 90 90 à 102110 à 120
N6220101N6220151N6220201N6220202N6220251N6220321N6220401N6220501N6220651N6220801N6220901N6221001
P6220101P6220151P6220201P6220202P6220251P6220321P6220401P6220501P6220651P6220801P6220901P6221001
111318
2229354353586374
26,031,839,541,347,654,063,579,494,2104,0119,0131,0
ND SIZE
DN TAILLE Ø EXTERIEURDU TUBE
H1 A C
404550
55606570809090110
L
MM GAZ SCHD
ERADO EBUTGROOVED
WITHOUTGROOVE
REFERENCEAVEC
GORGE
REFERENCESANS
GORGEL
H1 A
C
This stud could be used with Ce collet se monte sur la bridecarrée PN 400
REDUCING FLANGED HEAD BWCOLLET REDUIT BW
COLLET REDUIT D'UN Ø BW REDUCING FLANGED HEAD BW
13
19
25
32
38
51
64
76
89
102
1/2"
3/4"
1"
1"1/4
1"1/2
2"
2"1/2
3"
3"1/2
4"
16 à 18
20 à 22
25 à 28
30 à 25
38 à 45
48 à 52
60 à 65
75 à 80
88 à 90
90 à 102
17,5
22
28
35
44
51
65
80
90
102
H1
11
13
18
22
29
35
43
53
58
63
A
31,8
39,5
41,3
47,6
54,0
63,5
79,4
94,2
104,0
119,0
131,0
C
45
50
55
60
65
70
80
90
90
110
L
P14220151
P14220201
P14220202
P14220251
P14220321
P14220401
P14220501
P14220651
P14220801
P14220901
P14221001
REFERENCESANS
GORGE
WITHOUTGROOVE
N14220151
N14220201
N14220202
N14220251
N14220321
N14220401
N14220501
N14220651
N14220801
N14220901
N14221001
REFERENCEAVEC
GORGE
AREGROOVED
ND SIZE
DN TAILLE Ø EXTERIEURDU TUBE
TUBE OD
L
H1 A C
CODE 62
60
COMPOSANTS COMMUNSCOMMON COMPONENTS
ISO 6162 -2 / 6164 -2SAE 6000
PN 400/ CETOP
BRIDES MONOBLOC
13192532
3851
1/2"3/4"1"1"1/4
1"1/22"
A20151A20201A20251A20321A20322A20401A20501
M8M10M12M14M12M16M20
5/16"3/8"7/16"
1/2"5/8"3/4"
ND SIZE
DN TAILLE REFERENCEMONOBLOC
TYPE DEVISSERIE
TYPE 1 TYPE 2
SCREWS ONE PIECEFLANGE
1/2 BRIDES
13192532
3851
1/2"3/4"1"1"1/4
1"1/22"
B20151B20201B20251B20321B20322B20401B20501
M8M10M12M14M12M16M20
5/16"3/8"7/16"
1/2"3/8"3/4"
ND SIZE
DN TAILLE REFERENCE1/2 BRIDE
TYPE DEVISSERIE
TYPE 1 TYPE 2
SCREWS SPLITFLANGE
CARREE PN 400/CETOP
10131925323851647689
102
3/8"1/2"3/4"1"1"1/41"1/22"2"1/23"3"1/24"
A60101A60151A60201A60251A60321A60401A60501A60651A60801A60901A61001
A30102A30152A30202A30252A30322A30402
ND SIZE
DN TAILLE BRIDES CARREESREFERENCE
CETOPPN 400
SQUARE FLANGE
JOINTS TORIQUES 90 SHORE
10131925323851647689
102
3/8"1/2"3/4"1"1"1/41"1/22"2"1/23"3"1/24"
17,12 x 2,6218,64 x 3,5324,99 x 3,5332,92 x 3,5337,69 x 3,5347,22 x 3,5356,74 x 3,5369,44 x 3,5385,32 x 3,5398,02 x 3,53
110,72 x 3,53
AFPM9K01712AFPM9N01864AFPM9N02499AFPM9N03292AFPM9N03769AFPM9N04722AFPM9N05674AFPM9N06944AFPM9N08532AFPM9N09802AFPM9N11072
ANUBEZISDN
DN TAILLE Ø INTERIEUR X Ø TORE REFERENCEVITON
ANBR9K01712ANBR9N01864ANBR9N02499ANBR9N03292ANBR9N03769ANBR9N04722ANBR9N05674ANBR9N06944ANBR9N08532ANBR9N09802ANBR9N11072
REFERENCEPERBUNAN
JOINTS TYPES "FLS"
131925323851647689
102
1/2"3/4"1"1"1/41"1/22"2"1/23"3"1/24"
19,6826,0333,9138,7348,1357,6670,4886,2396,68
111,38
25,5231,8739,7544,5753,9763,5076,3292,07
104,52117,22
FLS 0151FLS 0201FLS 0251FLS 0321FLS 0401FLS 0501FLS 0651FLS 0801FLS 0901FLS 1001
ND SIZE
DN TAILLE Ø INT. Ø EXT. REFERENCEFLS
ANBR9N01864ANBR9N02499ANBR9N03292ANBR9N03769ANBR9N04722ANBR9N05674ANBR9N06944ANBR9N08532ANBR9N09802ANBR9N11072
JOINT TORIQUEEQUIVALENTPERBUNAN
Ø INT.
Ø Tore
3 - 3
0 - 1
0 - 1
2 - 92
Ø E
XT.
CODE 62
PETROMETALIC
www.petrometalic.comnegoceversailles@petrometalic.comnegocecambrai@petrometalic.com
Siège social32 rue de l'Ermitage78000 VERSAILLESTel : +33 1 39 23 96 70Fax : +33 1 39 23 96 71
Petrometalic CambraiRue des Ecluses de SellesBP 28759400 Cambrai CedexTél : +33 3 27 72 06 16Fax : +33 3 27 72 06 11
Recommended