?rDERAL sPEczrIcAYIom ?ederal Wnesal ~ie8s tiinistsation...

(

.- - .- Serx-n*r 28, 1973

- ?*. $peco PPP-S-760A&tobes 9, 1964

(

1.

?rDERAL sPEczrIcAYIom

(Am colutcmxs )

this specification was ●pprwed by the ~imaioner, ?ederalSupply Smite, Wnesal ~ie8s tiinistsation, for use of●U ?@derAl ●9enci*s.

SCOPEAm ~cATm

1.1 seeE+ This ●peificatim cevers nailless, flat normetalllc 8trappin9 and con-ductors ●re~or, intmded for us. h oecurimg packa90s and relnforcinq bundles and con-tainers (see C.A). ..,..”

1.2 Classification..

1.2.1 -S ●nd grades. Strapping covered by this spcafication shall be of thefollowing typ8s ●na qraa8s, ●s specified [see 6.2).

~r- Strapping, cord.Grade A - Rqular duty.Grade D - Hcaq duty.

~Ix- $trapping, water resistant, polyolefin plastic.

~pe 111 - Strapping, wat=r rcsis-nt nylon plastic.

2. APPLXCMLE DOCUNEN7S.

2.1 Tho followinq documents, of the issues Ln ●ffact on date o f invitation for buisor request for proposal, form ● part of this specification to the a%tent specifisd here-~.

rderal Srmcifxcatxen:

PPP-B-636 - DOXCS, Shipsinq, riberbaard.

Federal Standard:

?ed. Std. NO. 123 - Harking for Domestic Shipent {Civil ~ancies).

[Activities wesid~ t?w I%ckral ~ement 9ay obtein copies of Pederal S~ci~xca-tions, Standards, ●nd Handbooks ●s outlined under General Xnfomation in the Xndex ofFederal Speesfications ●nd Standards ●id ●t tho pr~cee ~icated in the Me%. TheIndex, which includes cumulative monthly suppl~es ●s lssud, is for aalc on ● sub-scription Msis by the Superintendent of ~ts, U. So ~emmenc Printin9 Otfica,Uashbgton, X 20402.

(Shqlo eopios of this specification and ot?wr ?edotd Specifications required by●ctivities outsi40 tlm ?edecal Gmmrment for bidd$nq purposos ●re available withoutcharqa frm Eu8iness Semfic8 Centers ●t the Ga90raA Semieu M-inistratha ~ionalOffice in $oston, New York, Ueshinqton, K, At.Aenta, ~Lcs~, Xansas City, ~, PortMrth, Denv~r, San ?rancxsco, &o An981*s, * ~ttk, 16h.

(~ederal Government ●ctivities My *taia copios of ?ode:al Specifications, Standardsand Mandbooks ●nd tlm Xndex of ?ederal Sp@cMLcation8 ●nd Standards fa ●stablished dis-tribution points in their ●9mIcisa.)

anilitaw sPecificationsl

nc*81Js

c

Downloaded from http://www.everyspec.com

Mll;wr’y Standards;

MR-STD-105 - samplkg Procedures ●nd Tables for Inspec:ioa by At”xibutGs.JUL-*129 - Maxkinq ~or Shipmat ●nd Staraqm.xzL-Sm-147 - ?alletized Un:: Msds oa 40 by 48 Inch Pallets.

(-pies of PUitary $peciflcathns and Standards requ:zed by contractors in connectionwith specific pro~rernant functloa: sctiu>dbe obtatid fr= tbo proeurhg ●gency or ●sueczed by tha Conuacttig Of:icu.

- . .. . .

3* xWuxRmzmS -

3.1 Haterials. Materials shall ti of th quallty normally used for th8 pu~G8s Lacc-nrcial practic. and ● hsrdaafter ●puifled under each type ●nd grade.

‘“1”’?F&..i. bubd.rSL-appLnq siaa~l cansist of longitudinal cords of h%qh tensfl. se-ength

boded Wi ●nd sha12 m-t tba str-ngth ●nd dimensional requArumntsspqified hueb. TIM bhde; shaU have ● glash point of not Less than 180*F. before itis ~iaed with &he cords to fora strappinq. Tha plastic binder shall cumpr:se not Lessthan 18 puemt of the s~-appinq by weight, ●nd shall hold the ind~vidual longitudinal . -chords ~etber to form ● non~en ●uappLn9 material. / “

3.1.1 ‘k 1:. The type IX strapping shall ba ●n extruded, oriented polyoAefin which●-ts tbe strongch ●nd dtiensional requxemencs specified herein.

3.1.3 ‘Nue 111. ~e type 111 strappirq shall be ●n extrud-1. orient~ nrlon whichmta the - ●nd dimensional requirements specsfled heroin.

3.2 Breakina strenc$t!! and ●longation. The breaklnq strength ●nd ●ionqation of ‘hemOnaatal~xC 8L-appnq s~ii compiy witn :hc rcqui:aaents shorn in :abl@s 1, II, ●nd IIIwhn cestad in ●ccgrclance WLth 4.4.2.

3.3 Dlsensions.

3“3”1F“ $trappinq shaU ba gurnishd la widths ●a specified in table I VI:! ●nallow~le to ●ance of : 1/32 -8. The t!!ickrmss of strapping shall be no 1.ss than0.024 isch.

3“3”2F“ The strappinq sktallbe furnsshd An the wid- spmczfled in table 1:,wieh an ●l 0Wab18 tolerance of plus or m~nus 0.031 inch. St=appinq with ● smooth finishshall be fumMhed b c28 :’lickness spec~:ied h tabla 11, WLth an ●llowable tolerance of● 0.002 kh for strap 0.023 inch or less in thiCkn.SSc and : 0.003 inch for strap qr8at-‘U than 0.02S inch th$ck. Uhen spocifik (see 5.2) L30 strapp~aq shall have ●n ambosedfl~ishd which yxaids an ov-rail mmlnal :hxckness no qroater taan tuace the Romina:t!!ickness of samot4h suapptiq 0: the swam wid%% ●nd bseekinq strenq=!.

3“3”’v“ The suappinq shall be 5Jrnltied in the widths ●nd “Jicknessoss+4Cifhd u caD ● 111. The width eoAarance shall h 2 0.00S MCh, ●nd the thicknesstoluanco shaU b. 2 0.002 inch for smap 0.02S inch or 1.ss in thickn8ss, and : 0.0fJ3M ~or strap qroacer than 0.02S lath th$ck.

3“4‘%%;*”%SYYL2”.L mifid, m I strapping shall be furnished in onecontbwus 11 b Osctl?aced wuund on fiber mres confomuinq toTahJo W. Tho yudsq. Of suap por WOOA shaU k aoc 1.s8 than that required by TabLov. TM Duabos of Splices per S*1 ●ail not Ueo’od thd followinq l-i-$S-1 W4ght :7prprm*teiy 20 pounds - 2 spL&8a b

40 pounds “ 4 splic9sditto 00 pmlnsls“ 7 Splims

●

2

.

Downloaded from http://www.everyspec.com

-. . .

1- ? ???-s-7608

(t.

Tmu x. &eakinq strangth, transvorso strwngth ●nd ●longation p-rcont of strappln9

width of Crado hroaking .longation trmwvcrse•maw~ * ●maaqth @ pucalt .trongth,

●t bro8k qrwns

3/w A 3s0 12 12s01/2 A 467 12s0S/$ A S8S H 12s0s/o B 7s0 12s03/4 A 700 H 12s0

TAD12 H. strmgth ●nd ●lonqation Percent of strapping (t- 11)MxnUum ●~onqat-zon? break, p9rcent

7160 16

1/4 .014 14s 101/4 .01s 180 101/4 .019 2001/4 .027 290 H

3/8 .015 2903/8 .018 2s0 ::3/8 .020 3903/8 .024 3s0 R.

7/16 .019 300 107/it .025 450 107fi6 .030 S50 10

l/2 .012s1/2 .Ofs1/2 .017L/2 .0209 P*At* A9*.--e1/2 .02s1/2 .030

300 10390 103so 10530 10Aan.e- ~@

6&o010 ;:

Slo .01s SOo 10:$: .020 680

●02s 8s0 ::M .030 1030 10

3/4 .028 10s0 10

*MU xxx. stronqth ●nd ●lonq paremt of strap

-*M1 thickaosa ma- breaking Ninhxm clonqation

7j16 .023 127/’l6 .02s 8 ,:: 123/2” .01s 4201/2 ● 020 MO ::l/2 .02s 700 12

.3

.

Downloaded from http://www.everyspec.com

. ... ..-— ------ ,.P?P-S-760B

.?ADLE w. Core requiraents for tvve I strapwina

Approxaaute &ngtA ,OK core hMLa* dmmeta Th&ckn*ss ofwdght of 4JKh of coro, inch core wall,

-

s inch

-o2s to so s-V2 ~ 1/4

Ovoz so 10 : 1/4 3 + l/8 .230 : .00s- 0

?Atu v. ‘Npes of smOIS, ●nd varda par stmol of tvse I st:avuina-&l’Ml width Tyy: of Yards perof strappinq Crade SBOO1

/4 A AOquLu 2,600Quad

3/8 A AqUluQU8d

1/2 A aeguhrQUad

S/a . . A RqtslarQuad

S/a R BoublcQuad

3/4 A Regular-ad

3/4 a 3ouble

10,4001,7s07,0001,300S,Zoo1,0004,000L,4Q02,800

7002,8001,134

3.S Coil yardaae. ~e m$nsmum yards per coLl of type 11 ●nd ;11 stra~pl-c shtll 5e8s +8cizmd M tabio VI for the size scrap ●nd COX1 wAdth (whan ●ppLicabA@) sp~cxfied Lnt!!econtract or order (see 6.21. The coil Lnsido diacm:er ●nd maximum ou~~kde diametershall ●lso b ●s spu&fied in the orderAnq data (see 6.2) . The mil shali be an. con-tinuous length of strappuq.

TABLE VI. Coil vardauel of ?v?e XI ●nd rII straminuW&dUl , Thickness, Mxn. yards per 1- H:a. yards per %&n. yards perinch mch vxde oscillated 5-J/4” w~de 6= wide

wound COL1 oscillated wound oscillated

7,/~~Ca:l wound tail

nlA.“-. 2>007/32 .018 1360

1;4 .014l/4 .01s1/4 .0191/4 .022l/4 .027

3/8 .01s3/8 .0183/8 .0203/8 .024

7/16 .0177/16 .0237/16 .02s7/16 .0297/16 .030

1/21/2

.012s

.01s1/2 .037:;; .020

.0251/2 .030

31s0

20001s00

L20010007s0

6500~

SOO03

3300

3000

2s00

10004

9

60005000

4000

3000

117s23S02600186021s0

29s03s00236018901s7s

.

4

Downloaded from http://www.everyspec.com

. . .. , PPP-S-760B

?ABLt Vx. (continwd)RLa. yarch per 3“ Rut. yasds pertttdo oscillated s-3/4” wide 6“ wide

(“

- coil Osclllstsd Wound Oscillatedcoil wound coil

b- XV8 .015 116Cs/8 .020 066w .025 700s/o .030 600

3/4 .02@5

1 1/4 .03s6.

Contractor may furn Lsh moro yazds per coxl tnan the mAnmua requxed un~ess otne.-xsespuified. -

.

22300 yatis ti self-contained dispensing carton..

J1830 yards ditto41000 yahds dittoS1S00 yards per 8“ wide coil.$167 yards per 1 1/4 inch wide ribbon wound coil.

Strappxng confoming to this specification shall be capable ofpractica using ●wls, buckles or welded Joints, ●nd strappingtools or equ~~en: suitable for the SLZO ●nd type of strapp%ng s~sf>ed (see 6.2).

3.6.1 Seals ●nd bueklcs. Seals ●nd buckles shall be steel, ●nd 8*11 have ● protec-tive coacti9 of zinc, ca&aLum, black iron ox~de, or qulvalent protection from corrosion.

3.6.2 Joint strength.

3.6.2.1 -e I stravuin~. Joxnts for Type I strap sb~ll be mad~ with seals or buck-108. T?aejoxnu shall have ● tensile strenqth of not 18s8 than 40 percent of the re-quired strap suength.

3.6.2.2 w- ?1 •n~ 1S: straonin~. Joints for types 12 and XII strapping s!M1l semsde with saals or by weld~ng. :ha ]o~nts shall have ● tens~l. strength of not lessthan 40 percent or ma requxred strap strength./

(\ U.-G---- . -2.? -b wuzasAt&p ● S-u-&ppihtj 6iiaii be *Craight, *wth, ●nd cioan ●na shaii be free

u fraa kinks, grooves, edqe curvatura, indentation, cracks ●nd other dofecu that my●ffect iu scmicsability.

4. WAZI= ASSURANCE PMVISIONS

4.1 R*SIX3n8ibilLtY for insoution. Tha suppl~er is responsibh for the performanceof all impect~on requ~:aacnu ●s sp~%fiod herein. cxc8Pt ●m Othemise Specafied, thosuppliar My utllizo -h&s own or ●ny-oth-r Lnspction faciiitiea ●nd senric.s ●cceptablem tio Govurnnt. lns~tion records of tho 8%amUution ●nd tasts shall b. kept caB-ploto snd •vailabl~ to the COwrrnent ●s specified in tho contract or otiar. l%.*@rrsaont rosamfes the riqht to perform ●ny of the ins~ctions set forth in the speci-fkation whaz~ such ins~hns ●xs deemd nm888ary to ●ssure that suppl$cs ●nd s8mices*nform to prosczikd reqwranes.

4.1.1 Inspoc tion of materials ●nd mmnents. In ●ccordanc. with 4.1, tho suppliesiS rosponsibh tor usurmq chst 8atu&8A8 ●nd caaponwtts used wsra manufactured, tested,SXd iaspoctti in ●ccordmco with th requir~ts of r8fcrsac~ subaAdhry s~ifications- stadards to th. 8xtont spocifiod, ar M non., in accordance with this s~ification.& * evofitof conflict, *L8 spactficacioa shall qovesn.

s●

4.1 SuBQling. *plinq foz $nspoct$m snd t8sting sh.dl be performed in ●cc&dsncewith the provxssons set forth La ?UL-~lOS, unless otherwiso spoclfisd.

4.2.1 &t. AU mmtallic strappinq of the suae t~, qrado, ●nd dimension presant-d ●t on- ~s, produced by on. msnufacturu shali k considered ● lot ~or tbo pups. of

. -tin.

4.2.2 Sam81ing for exadnatkm. A rind- s8mpLo of -Is or coils shall be sclectsdf- ecb bc 0S Mt8rLal oiie:sd for a8ab8tion in ●~e with tabla VI:.

.

.

Downloaded from http://www.everyspec.com

.. . . . . .

4.2.3 Sammlina for tests. A random sample of spools or coi~s shail b~ selected fraa●ach Lnspectaon lot m ●c=ozdance with table VIII ●nd shall be sub)ec:ed to :!ICtests●puified h 4.4.

4.3 Examination. Each of thQ sample spools or coils salu:ad in ●ccordance with4.2.2 shall 9xamind to verify compliance with th~s spuifica:ion. hSISifMtiO~ shall& Conduetad ●s specl~iad in table IX ●f:er first resovhg one or more turns of material

/-’ . f= -C S-l OX CO~l for ● L@nqth of •l~ht f~tt. Any spool or coil :~ the s~plt con.

U~in9 on- or morm dafacts shall b- rejected ●nd if the number of d efa ctiv e spools or -4

coils in any sample excods the ●cceptance nudxr :or that sarnplc, the lot roprcsented bytho samplo shall k rojecwi.

TMIZ VI:. Sa mvlinu for e x a min ation~ of spooLs Num89r of spools Acceptance Re]ec:xon n=:eror coils in ● lot or co$ls An ● number (dafutive)

santule (def~tive).20 nd under21 ●m 99 ; :

1

100 to 229 16 0 i230 w 399 20 1400 to 799 28 “ 2 :800.and over 40 3 4

TAELE VIII. Samellnc for ●cceptance xnseect:on tes:5Numhr of spools Nuaner os spooAs Acceptance numoaror coxls Ln ● lot or co>ls in ● (number of spools Reject~on n~er

Sample or coils non-

● eon:omnlnq on ●nyt93t

=nd undar $ 0 i16 to 40 041 tO 6S 1: 0 i “66 to 120 1s 2111 to 180 . 2s i181 to 300 3s :301 :0 500 so ; 3sol to 800 7s 3 4aol tO 1300 110 4 5

TABLZ IX. ClaoaifAcachn of dofeccs of nomuUic s~-appang in ●ccordance WXQI14m-sm-los

Camuoraesbitxal a

Oefuts

majos : ~inol width ●nd thickmss of strappinq101 not ●s 8pocified 0s not uL-&in tm

•llowabl~ tO~Q~anC8S.102 ?Lastic flmsh dafcctivo: ceachg less

than 18 pueone of tbo suapping by u.iqht

103(typo 1)0~r of 8PUCOS pas spool or coil ax-

104e80d8 tha pomlssibh w*.0im9nslons of eor8 or coil not withsn

10s●llouablo tolo?w”e.Typo ●d grad. not ●s spuifid.

IWtor:201 ?Ukaqiaq arid pukbq mt in accordance

with S.1 or S.2 ●s SPU ifid.

6

-- . - . . -. —-. .—.—- —.— .—.- - - —-- -— - - - —. -- . . .

Downloaded from http://www.everyspec.com

.Z . ?PP-S-760B. .

4.4.1 Conditlonin$. Test suaples chall be conditioned ●nd tested in ● uni:o.alyMlntalnod ●tmospnexe of 23° : 2*C. (73.4° : 3.6’F.) ●d SO : 2 percent rcla:ive hum$d-ity.

- .

~ c “ 4.4.X.1 Type I strappi,n9 shall be conditioned tq equilibrium prior to testing. A~~c •~11 * consid=d ● t equilibrium when the chAn90 in -iqht durxnq ● 1 4aour orbiqar ~riod of mtiitienUq does not exceed 0.02 pucont of tha sample’s w8ight ●t thed of tha period.

4.4.1.2 Typo :1 ●nd 11x SUappiq shall & conditioned for 40 &urs prior to testing.

4.4.2 Dreakinq strength. Broakinq strmgth of type I strapping ‘shsll be measured by● floor equipped with ● D-Load cell, ●nd utilizing upper clampsA-S3-8, W %ber coated, Masuri.ng 2 inches by 3 inches ●nd lower clamps A-53-2, DJrubbez Ceated wasur%ng 1 inch by 2 inch-s. The free length Mcween clamps shAll b~ 3illcbes, the cross h~arl s- 2 Lnch.a -r uinuta, ●ti the chart speed 6 inc!m8 permilaute . ?uU scab load shall be S00 or 1,000 pou~s. A piece of strapping of theWidth to & testad sha~l be inserted in the c>aaps ●d t!m InSUOn T@St8r ●ctivated.8rQakhq stronqth shall bc read directly from the chart to the n8arest pound. Braakxnq8UUWth Of type XI ●nd type 11: strappinq shall be masured on ● tensile ttster, such88 an Xnstmn” Tester or equivalent, CapabL@ of load accuracies to vithxn : 1 percent.~o crosshesd speed shall be 2 inches per minute ●nd tha free length b8twe8n cl~mps shallbe no groat=r tMn 5 &nchas. Suitable clamping ●rranqaents to prwunt slip~qe or break--8 within the clamps shall be used. Manual ●c!justnnt of t-tinq equipment, ●ftersaaple is in place, is requxred to remov~ slack ●nd provide ●iiqmnent prior to ●ctxvatinqthe t8st. The bed An punds ●t brsak shall M road dxrectly froa the tcstmq unit orits chart. (Split barrel typ clamps 2 to 4 mcims in diem=ter hsve -n found cffoctiveh gripping the type XI ●nd type 111 strapping.)

4.4.3 Elonqat*on. Percait .Ioqacion of t- I strapping ●t break -all be measuredin the same manner, ●t the same timo ●s breaking screnqth ●nd usxng the sam8 procedure(see 4.4.2). Porcant Elongation ●t break shall be read dir@ctly from th~ chart to the

nosrast ~cont. The percent ●lonqatson of type 11 ●nd 111 strapping ● t break shall bedotsrmimd by aoasurmq in inches tho ●xtmsion of tho sample qaqe lmqth ●t its break,obtained by foliouinq breakanq strength proeedurss (see 4.4.21, ●nd th8n dividinq thisutension fi~e t.y the or\qmsl free Aenqth ●nd mulc>plyinq by 100. An 8xt8nsanetar orequivaimt shall be usd to measure the extmsion, ssnc. Urgar ●rrors duo to sl>ppageor slack removal can be introduced if cross-head soparacion is used.

hoad s- shall b- 6 inch-s per mmute, ●nd the full scale Load sha~l be 10 pounds.Strapping samples shall be inserted in th~ clunps so that ●ach CLURP grips ●pproximatelyOna hslf of the width of th strap. Transwrse scrcngth shall be read dxectly from thezecotiinq dwico h pounds. .

.4.4.S P=rcent of plastic btier. A S-P1O of type I strap is conditioned for a

Biaiaa9 of 24 hours ts- 4.4*L0&) ●nd wiqhod. IYm Saqlo is then *oatod with ● suic-ablc solvent to ruva the plastk bhdar, washed ●d Ov@n dri~ ●t 22S’ + S“?* for c- .hours. Aft-r r~d fm the OWS, it LS recondition for ● nhtium of-24 hours ●ndtm@e&9has. Ttw ~rcmt bitior, bssod oa th omdittinad ueiqht of the conplme strap is “C8kuiatod 8s foll~:

Initial weight - ?iml waight&tAai W%gnt x 100 - ●emant bhhr

,

7

(

Downloaded from http://www.everyspec.com

. . .-

PPP-s-76an

s. PRZPAXA7x0N m% OZLIVUY

f S.1.1 Lavel A. Un189a oth.m~s~ specified, tha SPIS or coils of strappinq or con-mcars s~~ packa9ad im ●ccordane. with aothod XII, of JUL-P-114, in quantities *S8paclfLad Q3 tha csntract or ordu.

$.1.2 -@l c. !brnmtallic strapping or kutors shall b- ‘+ckagad in ●ccordanceVitb th uiizii:uru’s Coanercid pract:c8.

S.2 ?ackinq. Packin9 shall & lCVQ1 A, S or C ●s ●pacifisd (8*8 ~).

5.2.1 Lev81 A. !$mxmotallic strapplnq or =nnactors stulI”bs packad in containers con-fo~q ~ir V2a of PPP-B+34. Xnsofu ●s practical containers shall baof unifara*PO - ●izo, ba of mtilma cubs and tar. cons~atent with tha protection raquirad andcontain Mutt$cal qumtltiea. Cmtainms shall h elosd, .aalsd ●nd rcinforcsd in●ccordanc~ with ●ppllcabla contalmr #pacification or ●pp.ndti thueto. The weight ofContan- for ~i~rboud shipping containers shall b. subject to th~ ltiltations of thecontainer s~ification.

S.2.2 &v81 n. ?@mMtallic strapping or connectors shall k packad in domastic orwaathu-r~t typa contabmrs cenfoming to PPP-8-636. Insofar ●s practical, cun-taLmrs shall ba of uniform shapa ●nd 81x8, b- of minlatuas cub. ●nd Mr. consistence withtho pmt~tion raqulrd ●nd conta~n identical quantitlos. ContaAnors shall bc closadand ra=forcsd h ●ccordance with the ●ppllcabl. ~ntainar specification or ●ppandixtlmrem . 73. might of contents for ~iberboard shipping containers shall b~ sub]ect tsQ* Uxitatioru of tho cuntalnu .puiflcation.

S.2.3 MV91 c. No!umtalLic strapping or containers sIM1l ba packed in a namerwhich ui.l~o ●rzival &t deatuaat~on la satiafactsry condition ●nd wh&c5 WXIL b.accoptablc to t!!- carrier ●t huost rates. Shipping containers shaLl cmply wxth thoCarrgu mlas ●id regulations ●ppllcabla to the mod. of transpomtion.

S.3 Pal18tized unit load. Unlsss oths~lso spocifiad plhtizad unit loads shall bcin ●ccordance WL-m tUL-5Ta-&47.

S.4 Markinq.

S.4.1 Civil ●ueneiss. M addition to any spuial -rklaq roquirad by the contrac: or-.S. -~ls, ~uqos and shlppmq con~inus sMU b. markd in ucordanca with ?ad.SM. h. 1:3.

m I sUapp@q is for strapping of ut8rials to ba stmad utiu cover or lnaidaSaaq- .

6.1.1 caution. )lo~llic svappinq h not Lntmdod for usa h tha rdnfarc~t ofaa$ld - or cloatd paml ~ or Cxatos. steal SUappiaq S&uld b9 Uad for u●pplkattin.

8 .

Downloaded from http://www.everyspec.com

..—. —.. .PP*S-7608

● -● “’”2%--Y Wrchasars should ●oltit the prof.rr.d options pmlttd her-in

ad inclu ● tha fo lowing information in pr-r-nt dcG-nt*.

(h(i

tltls, nuabor ●d &tc of W* sp8ciflc8tion.~, grdo and d~nsioru roqulrod (s- 1.2.1, 3.3 ard ●pplictil. table).T~rd8g0 por s-l or coil (.H U1O V Or W).&vd of packaging d lmml of packbq roqulrti (-~. S.1 and S.2). .?Suotlzd unit 1*4S {s09 5-3 - S.3.1).-1s and buckles (808 3.6.1)8 WPt ●1*. •~ Watitr -lr~”Mako and DOC3d of strqtp~ oqui~ont that tho strapp~ and seals must wmk in,if 8pplie*l*.~on an enbossed finish on t- 11 stx~ppinq iS desir.d or Q11QWW3 (see 3.3.2).=Ll dknsiona (s.. 3.S md tabl. VI).

6.3 ?ay’ncnt should b. -O on tha basis of tho yardqo of nonm8taUic strapping deliv=rod.

IUL2TARY CUS?QDIMSS

hrmy-cL?tary - SAAir ?’Orc. - 69

Reviw ●ctivities:

Navy - UP

Aciumsuation,aet*”L Z bq% for th. $uprintmrhnt of Dc&mmt8. S80 ●ction 2 of this spoci~fication to obati axtr8 COP1OS ●d othu dommmts rofaronc.d hcrdn. ?ric8~3 cmts-.

.

9

Downloaded from http://www.everyspec.com