View
214
Download
1
Category
Preview:
Citation preview
Ref : BDR_UK3-8_LEDI-Calendar-V3.2 -priceless All technical changes, aesthetic, colour can be made without prior notice. 1
REFERENCES BASE BDR_UK-V3.2
LEDI CALENDAR CLOCKS NEW GENERATION
�
Ref : BDR_UK3-8_LEDI-Calendar-V3.2 -priceless 2 All technical changes, aesthetic, colour can be made without prior notice.
REFERENCES BASE BDR_UK3-8_LEDI-Calendar-V3.2
LEDI CALENDAR CLOCKS NEW GENERATION SUMMARY
LEDICA® 7.M Indoor / Single face ......................................................................................................... 3
N303 .................................................................................................................................................................................................................. 4
LEDICA® REVERSO 7.M Indoor / Double face ..................................................................................... 5
ND303 ............................................................................................................................................................................................................... 6
LEDICA® 7.M.S Indoor / Single face ...................................................................................................... 7
N304 .................................................................................................................................................................................................................. 8
LEDICA® REVERSO 7.M Indoor / Double face ..................................................................................... 9
ND304 ............................................................................................................................................................................................................. 10
LEDICA® ALPHA 7.M Indoor / Single face .......................................................................................... 11
N305 ................................................................................................................................................................................................................ 12
LEDICA® ALPHA REVERSO 7.M Indoor / Double face ...................................................................... 13
ND305 ............................................................................................................................................................................................................. 14
LEDICA® ALPHA 7.M.S Indoor / Single face....................................................................................... 15
N3003 .............................................................................................................................................................................................................. 16
LEDICA® ALPHA REVERSO 7.M.S Indoor / Double face ................................................................... 17
ND3003 ........................................................................................................................................................................................................... 18
LEDICA® ALPHA CARREE 7.M Indoor / Single face .......................................................................... 19
N306 ................................................................................................................................................................................................................ 20
LEDICA® ALPHA CARREE REVERSO 7.M Indoor / Double face ...................................................... 21
ND306 ............................................................................................................................................................................................................. 22
LEDICA® ALPHA 7.60.M Indoor / Single face ...................................................................................... 23
N3001 .............................................................................................................................................................................................................. 24
LEDICA®ALPHA REVERSO 7.60.M Indoor / Double face .................................................................. 25
ND3001 ........................................................................................................................................................................................................... 26
LEDICA® ALPHA 7.60.M.S Indoor / Single face ................................................................................... 27
N3004 .............................................................................................................................................................................................................. 28
LEDICA® ALPHA REVERSO7.60.M.S Indoor / Double face ............................................................... 29
ND3004 ........................................................................................................................................................................................................... 30
LEDICA® 10.M Indoor / Single face ...................................................................................................... 31
N393 ................................................................................................................................................................................................................ 32
LEDICA® REVERSO 10.M Indoor / Double face .................................................................................. 33
ND393 ............................................................................................................................................................................................................. 34
LEDICA® 10.M.S Indoor / Single face ................................................................................................... 35
N394 ................................................................................................................................................................................................................ 36
LEDICA® REVERSO 10.M.S Indoor / Double face ............................................................................... 37
ND394 ............................................................................................................................................................................................................. 38
MOUNTING BRACKETS FOR "LEDI & LEDICA" RANGE ................................................................... 39
For products references, indicate the options in the order of the table SHIPMENT LEAD TIME CODES : � 2 weeks* , � 4 weeks , � 6 weeks , � 8 to 12 weeks, � 16 weeks Note: 2 weeks of delay for the orders with less than 6 parts per product type, beyond, expect 4 weeks. Expect 1 to 2 additional weeks for any order placed during the summer break in August.
Ref : BDR_UK3-8_LEDI-Calendar-V3.2 -priceless All technical changes, aesthetic, colour can be made without prior notice. 3
LEDICA® 7.M
Indoor / Single face
Professional LED clock with tri-color display, robust and stylish combining the best of the technology for an easy installation and operation.
Time Setting The professional LEDICA ® clocks can display the same time information, synchronized by a master clock or a time server. On standalone and pulse version, the time setting is manual.
Internal time base The LEDICA ® clock has its own temperature compensated TCXO time base which allows an accuracy about 0.1 sec / day between 0° to 40°C in case of synchronization loss.
Security Backup of time information in case of mains absence, by lithium battery : 10 years.
Specifications
Power supply 230 VAC/50-60 Hz 115 VAC/50-60 Hz Low voltage 12, 24 or 48 VDC NTP Version : POE (Power Over Ethernet)
Certifications CE, EN 60950, EN 55022, EN 55024, ROHS.
Maximum consumption
13,66 VA
MTBF 46 267 h.
MTTR Display : 5 min. CPU : 5 min. Power supply : 5 min.
IP 30
Dimension 625x165x62 mm (LxHxD)
Digit height Hour/minute : 70 mm Date : 50 mm (Alphanumeric display for day and month)
Maximal distance of legibility
35 meters
Weight 2,2 kg
Shock resistance IK9
Operating temperature
-20° to 50°C
Electrical equipment classification Class 2
Display / LED specifications SMD Technology, Viewing Angle: 160°.
bi-colored LED (red green) monochrome LED
Red : 245 mcd Yellow
Blue : 625 mcd
Green : 780 mcd White : 625 mcd
Key features Perfectly silent, direct and accurate reading of time. SMD bi-colour LED technology allows to change the display colour in red, green or yellow (optional white or blue). The patented technology of the light guide provides a perfect regularity of the brightness and viewing angle at 160 °. The front face of the LEDICA ® is coated with an antiglare and anti-scratch film giving an extraordinary 60000 : 1 level of contrast. Pre-programmed calendar available in 11 languages. An anodized aluminium case wall mount (screw lock) ,flush mount or bracket mount. A protection against over-voltage and industrial interference via EMC filter. An easy "plug and play" installation. Its participation in the sustainable development life span over 20 years. 2 years warranty.
Remote management (with NTP synchronization) Remote configuration and time setting via WEB interface. Automatic time zone choice and daylight saving time change. Supervision via HTTP, SNMP, Telnet. “GT Network Manager” (Windows® NT/XP/2000/Vista (32 bits)/ Windows 7).
Synchronization inputs
• Standalone TCXO quartz time base.
• DCF(EUROPE).
• France Inter (EUROPE).
• GPS.
• Pulse 24V reversed parallel minute or serial reversed 1/2 minute pulses.
• AFNOR NFS 87500
• IRIG B : shall be specified on Purchase order.
• ASCII RS232, ASCII RS422/485.
• DHW 869.525 Mhz.
• NTP Ethernet 10/100BaseT automatic detection :RJ45.
• NTP POE (Power Over Ethernet).
• SMPTE.
• Wi-Fi(IEEE 802.11B/G standard)
Ref : BDR_UK3-8_LEDI-Calendar-V3.2 -priceless 4 All technical changes, aesthetic, colour can be made without prior notice.
LEDICA® 7.M Indoor / Single face
ITEM CODE
N303 / VERSION � � � � � �
Standalone : TCXO quartz radiosynchronizable time base Accuracy +/- 0.1 sec/24 h (between 0°C and 40°C)
� 2
DCF Radiosynchronization. Antenna + 4m of cable � D
GPS Antenna + 10m of cable � G
24V reversed parallel minute pulses receiver clock � 3
Minute 60V receiver � V
Serial reversed 1/2 minute pulses receiver clock Consumption 1.25V. 60 to 120mA. 39 ohms shunt
� 5
AFNOR NFS 87500* receiver clock � 8
SMPTE-EBU receiver clock � 7
ASCII RS 232 receiver clock � B
ASCII 422/485 receiver clock � Q
DHW 869.525 Mhz Synchronization � L
NTP Ethernet 10/100 base T Synchronization � N
Wi-Fi(IEEE 802.11B/G standard) � W *IRIG.B Version: to be specified as « remark » on your Purchase Order.
CONFIGURABLE LED
Configurable colour : red, yellow, green � 1
Configurable colour : white or blue � 5
MOUNTING
Standard : wall mount** � 1
Flush mount � 3
** Please refer to the brackets technical sheet
COLOUR OF CASE
Standard : anodized aluminium � 7
Black painted aluminium � 0
Specific � -
POWER SUPPLY
Standard : 230VAC/50-60Hz � 0
115VAC/50-60Hz � 1
Power Over Ethernet (POE) � 7
Low voltage power supply : 12 VDC � 2
Low voltage power supply : 24 VDC � 4
Low voltage power supply : 48 VDC � 6
OPTIONS
Stop clock function via WEB interface � F
Timer : touch housing control block (flush and wall mount version) + 4 meters of cable - up/down
� I
Timer case + 15 m of cable � C
Temperature probe(accuracy ± 0.5°C) + 5 m cable : temperature and hour displayed alternately
� T
Time beep output, or contact relays for end of timer � E
ASCII RS232 output(do not associate with Ascii input version) � A
or : ASCII RS422-485 output(do not associate with Ascii input version) � R
Tropicalized � U
Specification � D
Ref : BDR_UK3-8_LEDI-Calendar-V3.2 -priceless All technical changes, aesthetic, colour can be made without prior notice. 5
LEDICA® REVERSO 7.MIndoor / Double face
Professional LED clock with tri-color display, robust and stylish combining the best of the technology for an easy installation and operation.
Time Setting The professional LEDICA ® clocks can display the same time information, synchronized by a master clock or a time server. On standalone and pulse version, the time setting is manual.
Internal time base The LEDICA ® clock has its own temperature compensated TCXO time base which allows an accuracy about 0.1 sec / day between 0° to 40°C in case of synchronization loss.
Security Backup of time information in case of mains absence, by lithium battery : 10 years.
Specifications
Power supply 230 VAC/50-60 Hz 115 VAC/50-60 Hz Low voltage 12, 24 or 48 VDC NTP : POE (Power Over Ethernet)
Certification CE, EN 60950, EN 55022, EN 55024, ROHS.
Maximum consumption
16,40 VA
IP 30
MTBF 46 267 h.
MTTR Display : 5 min. CPU : 5 min. Power supply : 5 min.
Weight 2.3 – 2.7.kg
Dimension 625x165x99 mm (LxHxD) Mounting bracket : 150 mm
Digit height Hour/minute : 70 mm Date : 50 mm (Alphanumeric display for day and month)
Maximal distance of legibility
35 meters
Shock resistance IK9
Operating temperature
-20° to 50°C
Electrical equipment classification Class 2
Display / LED specifications SMD Technology, Viewing Angle: 160°.
bi-colored LED (red green) monochrome LED
Red : 245 mcd Yellow
Blue : 625 mcd
Green : 780 mcd White : 625 mcd
Key features Perfectly silent, direct and accurate reading of time. SMD bi-colour LED technology allows to change the display colour in red, green or yellow (optional white or blue). The patented technology of the light guide provides a perfect regularity of the brightness and viewing angle at 160 °. The front face of the LEDICA ® is coated with an antiglare and anti-scratch film giving an extraordinary 60000 : 1 level of contrast. A protection against over-voltage and industrial interference via EMC filter. Pre-programmed calendar available in 11 languages. Anodized aluminium case : Double face IP30 on bracket. An easy "plug and play" installation. Its participation in the sustainable development life span over 20 years. 2 years warranty.
Remote management (with NTP synchronization) Remote configuration and time setting via WEB interface. Automatic time zone choice and daylight saving time change. Supervision via HTTP, SNMP, Telnet. “GT Network Manager” (Windows® NT/XP/2000/Vista (32 bits) /Windows 7).
Synchronization inputs
• Standalone TCXO quartz time base.
• DCF(EUROPE).
• France Inter (EUROPE).
• GPS.
• Pulse 24V reversed parallel minute or serial reversed 1/2 minute pulses.
• AFNOR NFS 87500
• IRIG B : shall be specified on Purchase order.
• ASCII RS232, ASCII RS422/485.
• DHW 869.525 Mhz.
• NTP Ethernet 10/100BaseT automatic detection :RJ45.
• NTP POE (Power Over Ethernet).
• SMPTE.
• Wi-Fi(IEEE 802.11B/G standard)
150
Ref : BDR_UK3-8_LEDI-Calendar-V3.2 -priceless 6 All technical changes, aesthetic, colour can be made without prior notice.
LEDICA® REVERSO 7.M Indoor / Double face
ITEM CODE
ND303 / 2 DISPLAY � � � � � � �
Double face 2
VERSION
Standalone : TCXO quartz radiosynchronizable time base Accuracy +/- 0.1 sec/24 h (between 0°C and 40°C)
� 2
DCF Radiosynchronization. Antenna + 4m of cable � D
GPS Antenna + 10m of cable � G
24V reversed parallel minute pulses receiver clock � 3
Minute 60V receiver � V
Serial reversed 1/2 minute pulses receiver clock Consumption 1.25V. 60 to 120mA. 39 ohms shunt
� 5
AFNOR NFS 87500* receiver clock � 8
SMPTE-EBU receiver clock � 7
ASCII RS 232 receiver clock � B
ASCII 422/485 receiver clock � Q
DHW 869.525 Mhz Synchronization � L
NTP Ethernet 10/100 base T Synchronization � N
Wi-Fi(IEEE 802.11B/G standard) � W
*IRIG.B Version: to be specified as « remark » on your Purchase Order.
CONFIGURABLE LED
Configurable colour : red, yellow, green � 1
Configurable colour : white or blue � 5
MOUNTING
To be associated with requested brackets ** � P
** Please refer to the brackets technical sheet
COLOUR OF CASE
Standard : anodized aluminium � 7
Black painted aluminium � 0
Specific � -
POWER SUPPLY
Standard : 230VAC/50-60Hz � 0
115VAC/50-60Hz � 1
Power Over Ethernet (POE) � 7
Low voltage power supply : 12 VDC � 2
Low voltage power supply : 24 VDC � 4
Low voltage power supply : 48 VDC � 6
OPTIONS
Stop clock function via WEB interface � F
Timer : touch housing control block (flush and wall mount version) + 4 meters of cable - up/down
� I
Timer case + 15 m of cable � C
Temperature probe(accuracy ± 0.5°C) + 5 m cable : temperature and hour displayed alternately
� T
Time beep output, or contact relays for end of timer � E
ASCII RS232 output(do not associate with Ascii input version) � A
or : ASCII RS422-485 output(do not associate with Ascii input version) � R
Tropicalized � U
Specification � S
Ref : BDR_UK3-8_LEDI-Calendar-V3.2 -priceless All technical changes, aesthetic, colour can be made without prior notice. 7
LEDICA® 7.M.S
Indoor / Single face
Professional LED clock with tri-color display, robust and stylish combining the best of the technology for an easy installation and operation.
Time Setting The professional LEDICA ® clocks can display the same time information, synchronized by a master clock or a time server. On standalone and pulse version, the time setting is manual.
Internal time base The LEDICA ® clock has its own temperature compensated TCXO time base which allows an accuracy about 0.1 sec / day between 0° to 40°C in case of synchronization loss.
Security Backup of time information in case of mains absence, by lithium battery : 10 years.
Specifications
Power supply 230 VAC/50-60 Hz 115 VAC/50-60 Hz Low voltage 12, 24 or 48 VDC NTP Version : POE (Power Over Ethernet)
Certification CE, EN 60950, EN 55022, EN 55024, ROHS
Maximum consumption
17,62 VA
IP 30
MTBF 46 267 h.
MTTR Display : 5 min. CPU : 5 min. Power supply : 5 min.
Weight 2,4 kg
Dimension 715x165x62 mm (LxHxD)
Digit height
Hour /minute : 70 mm Second : 50 mm Date : 50 mm (Alphanumeric display for day and month)
Maximal distance of legibility
35 meters
Shock resistance IK9
Operating temperature
-20° to 50°C
Electrical equipment classification Class 2
Display / LED specifications SMD Technology, Viewing Angle: 160°.
bi-colored LED (red green) monochrome LED
Red : 245 mcd Yellow
Blue : 625 mcd
Green : 780 mcd White : 625 mcd
Key features Perfectly silent, direct and accurate reading of time. SMD bi-colour LED technology allows to change the display colour in red, green or yellow (optional white or blue). The patented technology of the light guide provides a perfect regularity of the brightness and viewing angle at 160 °. The front face of the LEDICA ® is coated with an antiglare and anti-scratch film giving an extraordinary 60000 : 1 level of contrast. Pre-programmed calendar available in 11 languages. An anodized aluminium case wall mount (screw lock) ,flush mount or bracket mount. A protection against over-voltage and industrial interference via EMC filter. An easy "plug and play" installation. Its participation in the sustainable development life span over 20 years. 2 years warranty.
Remote management (with NTP synchronization) Remote configuration and time setting via WEB interface. Automatic time zone choice and daylight saving time change. Supervision via HTTP, SNMP, Telnet. “GT Network Manager” (Windows® NT/XP/2000/Vista (32 bits) /Windows 7).
Synchronization inputs
• Standalone TCXO quartz time base.
• DCF(EUROPE).
• France Inter (EUROPE).
• GPS.
• Pulse 24V reversed parallel minute or serial reversed 1/2 minute pulses.
• AFNOR NFS 87500
• IRIG B : shall be specified on Purchase order.
• ASCII RS232, ASCII RS422/485.
• DHW 869.525 Mhz.
• NTP Ethernet 10/100BaseT automatic detection :RJ45.
• NTP POE (Power Over Ethernet).
• SMPTE.
• Wi-Fi(IEEE 802.11B/G standard)
Ref : BDR_UK3-8_LEDI-Calendar-V3.2 -priceless 8 All technical changes, aesthetic, colour can be made without prior notice.
LEDICA® 7.M.S Indoor / Single face
ITEM CODE
N304 / VERSION � � � � � �
Standalone : TCXO quartz radiosynchronizable time base Accuracy +/- 0.1 sec/24 h (between 0°C and 40°C)
� 2
DCF Radiosynchronization. Antenna + 4m of cable � D
GPS Antenna + 10m of cable � G
24V reversed parallel minute pulses receiver clock � 3
Minute 60V receiver � V
Serial reversed 1/2 minute pulses receiver clock Consumption 1.25V. 60 to 120mA. 39 ohms shunt
� 5
AFNOR NFS 87500* receiver clock � 8
SMPTE-EBU receiver clock � 7
ASCII RS 232 receiver clock � B
ASCII 422/485 receiver clock � Q
DHW 869.525 Mhz Synchronization � L
NTP Ethernet 10/100 base T Synchronization � N
Wi-Fi(IEEE 802.11B/G standard) � W *IRIG.B Version: to be specified as « remark » on your Purchase Order.
CONFIGURABLE LED
Configurable colour : red, yellow, green � 1
Configurable colour : white or blue � 5
MOUNTING
Standard : wall mount** � 1
Flush mount � 3
** Please refer to the brackets technical sheet
COLOUR OF CASE
Standard : anodized aluminium � 7
Black painted aluminium � 0
Specific � -
POWER SUPPLY
Standard : 230VAC/50-60Hz � 0
115VAC/50-60Hz � 1
Power Over Ethernet (POE) � 7
Low voltage power supply : 12 VDC � 2
Low voltage power supply : 24 VDC � 4
Low voltage power supply : 48 VDC � 6
OPTIONS
Stop clock function via WEB interface � F
Timer : touch housing control block (flush and wall mount version) + 4 meters of cable - up/down
� I
Timer case + 15 m of cable � C
Temperature probe(accuracy ± 0.5°C) + 5 m cable : temperature and hour displayed alternately
� T
Time beep output, or contact relays for end of timer � E
ASCII RS232 output(do not associate with Ascii input version) � A
or : ASCII RS422-485 output(do not associate with Ascii input version) � R
Tropicalized � U
Specification � D
Ref : BDR_UK3-8_LEDI-Calendar-V3.2 -priceless All technical changes, aesthetic, colour can be made without prior notice. 9
LEDICA® REVERSO 7.M
Indoor / Double face
Professional LED clock with tri-color display, robust and stylish combining the best of the technology for an easy installation and operation.
Time Setting The professional LEDICA ® clocks can display the same time information, synchronized by a master clock or a time server. On standalone and pulse version, the time setting is manual.
Internal time base The LEDICA ® clock has its own temperature compensated TCXO time base which allows an accuracy about 0.1 sec / day between 0° to 40°C in case of synchronization loss.
Security Backup of time information in case of mains absence, by lithium battery : 10 years.
Specification
Power supply 230 VAC/50-60 Hz 115 VAC/50-60 Hz Low voltage 12, 24 or 48 VDC NTP POE (Power Over Ethernet)
Certification CE, EN 60950, EN 55022, EN 55024, ROHS.
Maximum consumption
21,14 VA
IP 30
MTBF 42 267 h.
MTTR Display : 5 min. CPU : 5 min. Power supply : 5 min.
Weight 2.4 – 2.7 kg
Dimension 715x165x99 mm (LxHxD) Mounting bracket : 150 mm
Digit height Hour/minute : 70 mm Second : 50 mm Date : 50 mm (Alphanumeric display for day and month)
Maximal distance of legibility
35 meters
Shock resistance IK9
Operating temperature
-20° to 50°C
Electrical equipment classification Class 2
Display / LED specifications SMD Technology, Viewing Angle: 160°.
bi-colored LED (red green) monochrome LED
Red : 245 mcd Yellow
Blue : 625 mcd
Green : 780 mcd White : 625 mcd
Key features Perfectly silent, direct and accurate reading of time. SMD bi-colour LED technology allows to change the display colour in red, green or yellow (optional white or blue). The patented technology of the light guide provides a perfect regularity of the brightness and viewing angle at 160 °. The front face of the LEDICA ® is coated with an antiglare and anti-scratch film giving an extraordinary 60000 : 1 level of contrast. A protection against over-voltage and industrial interference via EMC filter. Pre-programmed calendar available in 11 languages. Anodized aluminium case : Double face IP30 on bracket. An easy "plug and play" installation. Its participation in the sustainable development life span over 20 years. 2 years warranty.
Remote management (with NTP synchronization) Remote configuration and time setting via WEB interface. Automatic time zone choice and daylight saving time change. Supervision via HTTP, SNMP, Telnet. “GT Network Manager” (Windows® NT/XP/2000/Vista (32 bits) /Windows 7).
Synchronization inputs
• Standalone TCXO quartz time base.
• DCF(EUROPE).
• France Inter (EUROPE).
• GPS.
• Pulse 24V reversed parallel minute or serial reversed 1/2 minute pulses.
• AFNOR NFS 87500
• IRIG B : shall be specified on Purchase order.
• ASCII RS232, ASCII RS422/485.
• DHW 869.525 Mhz.
• NTP Ethernet 10/100BaseT automatic detection :RJ45.
• NTP POE (Power Over Ethernet).
• SMPTE.
• Wi-Fi(IEEE 802.11B/G standard)
150
Ref : BDR_UK3-8_LEDI-Calendar-V3.2 -priceless 10 All technical changes, aesthetic, colour can be made without prior notice.
LEDICA® REVERSO 7.M.S Indoor / Double face
ITEM CODE
ND304 / 2 DISPLAY � � � � � � �
Double face 2
VERSION
Standalone : TCXO quartz radiosynchronizable time base Accuracy +/- 0.1 sec/24 h (between 0°C and 40°C)
� 2
DCF Radiosynchronization. Antenna + 4m of cable � D
GPS Antenna + 10m of cable � G
24V reversed parallel minute pulses receiver clock � 3
Minute 60V receiver � V
Serial reversed 1/2 minute pulses receiver clock Consumption 1.25V. 60 to 120mA. 39 ohms shunt
� 5
AFNOR NFS 87500* receiver clock � 8
SMPTE-EBU receiver clock � 7
ASCII RS 232 receiver clock � B
ASCII 422/485 receiver clock � Q
DHW 869.525 Mhz Synchronization � L
NTP Ethernet 10/100 base T Synchronization � N
Wi-Fi(IEEE 802.11B/G standard) � W
*IRIG.B Version: to be specified as « remark » on your Purchase Order.
CONFIGURABLE LED
Configurable colour : red, yellow, green � 1
Configurable colour : white or blue � 5
MOUNTING
To be associated with requested brackets ** � P
** Please refer to the brackets technical sheet
COLOUR OF CASE
Standard : anodized aluminium � 7
Black painted aluminium � 0
Specific � -
POWER SUPPLY
Standard : 230VAC/50-60Hz � 0
115VAC/50-60Hz � 1
Power Over Ethernet (POE) � 7
Low voltage power supply : 12 VDC � 2
Low voltage power supply : 24 VDC � 4
Low voltage power supply : 48 VDC � 6
OPTIONS
Stop clock function via WEB interface � F
Timer : touch housing control block (flush and wall mount version) + 4 meters of cable - up/down
� I
Timer case + 15 m of cable � C
Temperature probe(accuracy ± 0.5°C) + 5 m cable : temperature and hour displayed alternately
� T
Time beep output, or contact relays for end of timer � E
ASCII RS232 output(do not associate with Ascii input version) � A
or : ASCII RS422-485 output(do not associate with Ascii input version) � R
Tropicalized � U
Specification � S
Ref : BDR_UK3-8_LEDI-Calendar-V3.2 -priceless All technical changes, aesthetic, colour can be made without prior notice. 11
LEDICA® ALPHA 7.M
Indoor / Single face
Professional LED clock with tri-color display, robust and stylish combining the best of the technology for an easy installation and operation.
Time Setting The professional LEDICA ® clocks can display the same time information, synchronized by a master clock or a time server. On standalone and pulse version, the time setting is manual.
Internal time base The LEDICA ® clock has its own temperature compensated TCXO time base which allows an accuracy about 0.1 sec / day between 0° to 40°C in case of synchronization loss.
Security Backup of time information in case of mains absence, by lithium battery : 10 years.
Specification
Power supply 230 VAC/50-60 Hz 115 VAC/50-60 Hz Low voltage 12, 24 or 48 VDC NTP POE (Power Over Ethernet)
Certification CE, EN 60950, EN 55022, EN 55024, ROHS.
Maximum consumption
14,78 VA
IP 30
MTBF 42 267 h.
MTTR Display : 5 min. CPU : 5 min. Power supply : 5 min.
Weight 2,4 kg
Dimension 650x220x62 mm (LxHxD)
Digit height Hour/ minute : 70mm Date : 50 mm (Alphanumeric display for day and month)
Maximal distance of legibility
35 meters
Shock resistance IK9
Operating temperature
-20° to 50°C
Electrical equipment classification Class 2
Display / LED specifications SMD Technology, Viewing Angle: 160°.
bi-colored LED (red green) monochrome LED
Red : 245 mcd Yellow
Blue : 625 mcd
Green : 780 mcd White : 625 mcd
Key features Perfectly silent, direct and accurate reading of time. SMD bi-colour LED technology allows to change the display colour in red, green or yellow (optional white or blue). The patented technology of the light guide provides a perfect regularity of the brightness and viewing angle at 160 °. The front face of the LEDICA ® is coated with an antiglare and anti-scratch film giving an extraordinary 60000 : 1 level of contrast. Pre-programmed calendar available in 11 languages. An anodized aluminium case wall mount (screw lock) ,flush mount or bracket mount. A protection against over-voltage and industrial interference via EMC filter. An easy "plug and play" installation. Its participation in the sustainable development life span over 20 years. 2 years warranty.
Remote management (with NTP synchronization) Remote configuration and time setting via WEB interface. Automatic time zone choice and daylight saving time change. Supervision via HTTP, SNMP, Telnet. “GT Network Manager” (Windows® NT/XP/2000/Vista (32 bits) / Windows 7).
Synchronization inputs
• Standalone TCXO quartz time base.
• DCF(EUROPE).
• France Inter (EUROPE).
• GPS.
• Pulse 24V reversed parallel minute or serial reversed 1/2 minute pulses.
• AFNOR NFS 87500
• IRIG B : shall be specified on Purchase order.
• ASCII RS232, ASCII RS422/485.
• DHW 869.525 Mhz.
• NTP Ethernet 10/100BaseT automatic detection :RJ45.
• NTP POE (Power Over Ethernet).
• SMPTE.
• Wi-Fi(IEEE 802.11B/G standard)
Ref : BDR_UK3-8_LEDI-Calendar-V3.2 -priceless 12 All technical changes, aesthetic, colour can be made without prior notice.
LEDICA® ALPHA 7.M Indoor / Single face
ITEM CODE
N305 / VERSION � � � � � �
Standalone : TCXO quartz radiosynchronizable time base Accuracy +/- 0.1 sec/24 h (between 0°C and 40°C)
� 2
DCF Radiosynchronization. Antenna + 4m of cable � D
GPS Antenna + 10m of cable � G
24V reversed parallel minute pulses receiver clock � 3
Minute 60V receiver � V
Serial reversed 1/2 minute pulses receiver clock Consumption 1.25V. 60 to 120mA. 39 ohms shunt
� 5
AFNOR NFS 87500* receiver clock � 8
SMPTE-EBU receiver clock � 7
ASCII RS 232 receiver clock � B
ASCII 422/485 receiver clock � Q
DHW 869.525 Mhz Synchronization � L
NTP Ethernet 10/100 base T Synchronization � N
Wi-Fi(IEEE 802.11B/G standard) � W *IRIG.B Version: to be specified as « remark » on your Purchase Order.
CONFIGURABLE LED
Configurable colour : red, yellow, green � 1
Configurable colour : white or blue � 5
MOUNTING
Standard : wall mount** � 1
Flush mount � 3
** Please refer to the brackets technical sheet
COLOUR OF CASE
Standard : anodized aluminium � 7
Black painted aluminium � 0
Specific � -
POWER SUPPLY
Standard : 230VAC/50-60Hz � 0
115VAC/50-60Hz � 1
Power Over Ethernet (POE) � 7
Low voltage power supply : 12 VDC � 2
Low voltage power supply : 24 VDC � 4
Low voltage power supply : 48 VDC � 6
OPTIONS
Stop clock function via WEB interface � F
Timer : touch housing control block (flush and wall mount version) + 4 meters of cable - up/down
� I
Timer case + 15 m of cable � C
Temperature probe(accuracy ± 0.5°C) + 5 m cable : temperature and hour displayed alternately
� T
Time beep output, or contact relays for end of timer � E
ASCII RS232 output(do not associate with Ascii input version) � A
or : ASCII RS422-485 output(do not associate with Ascii input version) � R
Tropicalized � U
Specification � D
Ref : BDR_UK3-8_LEDI-Calendar-V3.2 -priceless All technical changes, aesthetic, colour can be made without prior notice. 13
LEDICA® ALPHA REVERSO 7.M
Indoor / Double face
Professional LED clock with tri-color display, robust and stylish combining the best of the technology for an easy installation and operation.
Time Setting The professional LEDICA ® clocks can display the same time information, synchronized by a master clock or a time server. On standalone and pulse version, the time setting is manual.
Internal time base The LEDICA ® clock has its own temperature compensated TCXO time base which allows an accuracy about 0.1 sec / day between 0° to 40°C in case of synchronization loss.
Security Backup of time information in case of mains absence, by lithium battery : 10 years.
Specification
Power supply 230 VAC/50-60 Hz 115 VAC/50-60 Hz Low voltage 12, 24 or 48 VDC NTP POE (Power Over Ethernet)
Certification CE, EN 60950, EN 55022, EN 55024, ROHS.
Maximum consumption
17,73 VA
IP 30
MTBF 46 267 h.
MTTR Display : 5 min. CPU : 5 min. Power supply : 5 min.
Weight 2.4 – 2,9 kg
Dimension 650x220x99 mm (LxHxD) mounting bracket : 160 mm
Digit height Hour/minute : 70 mm Date : 50 mm (Alphanumeric display for day and month)
Maximal distance of legibility
35 meters
Shock resistance IK9
Operating temperature
-20° to 50°C
Electrical equipment classification Class 2
Display / LED specifications SMD Technology, Viewing Angle: 160°.
bi-colored LED (red green) monochrome LED
Red : 245 mcd Yellow
Blue : 625 mcd
Green : 780 mcd White : 625 mcd
Key features Perfectly silent, direct and accurate reading of time. SMD bi-colour LED technology allows to change the display colour in red, green or yellow (optional white or blue). The patented technology of the light guide provides a perfect regularity of the brightness and viewing angle at 160 °. The front face of the LEDICA ® is coated with an antiglare and anti-scratch film giving an extraordinary 60000 : 1 level of contrast. A protection against over-voltage and industrial interference via EMC filter. Pre-programmed calendar available in 11 languages. Anodized aluminium case : Double face IP30 on bracket. An easy "plug and play" installation. Its participation in the sustainable development life span over 20 years. 2 years warranty.
Remote management (with NTP synchronization) Remote configuration and time setting via WEB interface. Automatic time zone choice and daylight saving time change. Supervision via HTTP, SNMP, Telnet. “GT Network Manager” (Windows® NT/XP/2000/Vista (32 bits) /Windows 7).
Synchronization inputs
• Standalone TCXO quartz time base.
• DCF(EUROPE).
• France Inter (EUROPE).
• GPS.
• Pulse 24V reversed parallel minute or serial reversed 1/2 minute pulses.
• AFNOR NFS 87500
• IRIG B : shall be specified on Purchase order.
• ASCII RS232, ASCII RS422/485.
• DHW 869.525 Mhz.
• NTP Ethernet 10/100BaseT automatic detection :RJ45.
• NTP POE (Power Over Ethernet).
• SMPTE.
• Wi-Fi(IEEE 802.11B/G standard)
150
Ref : BDR_UK3-8_LEDI-Calendar-V3.2 -priceless 14 All technical changes, aesthetic, colour can be made without prior notice.
LEDICA® ALPHA REVERSO 7.M Indoor / Double face
ITEM CODE
ND305 / 2 DISPLAY � � � � � � �
Double face 2
VERSION
Standalone : TCXO quartz radiosynchronizable time base Accuracy +/- 0.1 sec/24 h (between 0°C and 40°C)
� 2
DCF Radiosynchronization. Antenna + 4m of cable � D
GPS Antenna + 10m of cable � G
24V reversed parallel minute pulses receiver clock � 3
Minute 60V receiver � V
Serial reversed 1/2 minute pulses receiver clock Consumption 1.25V. 60 to 120mA. 39 ohms shunt
� 5
AFNOR NFS 87500* receiver clock � 8
SMPTE-EBU receiver clock � 7
ASCII RS 232 receiver clock � B
ASCII 422/485 receiver clock � Q
DHW 869.525 Mhz Synchronization � L
NTP Ethernet 10/100 base T Synchronization � N
Wi-Fi(IEEE 802.11B/G standard) � W
*IRIG.B Version: to be specified as « remark » on your Purchase Order.
CONFIGURABLE LED
Configurable colour : red, yellow, green � 1
Configurable colour : white or blue � 5
MOUNTING
To be associated with requested brackets ** � P
** Please refer to the brackets technical sheet
COLOUR OF CASE
Standard : anodized aluminium � 7
Black painted aluminium � 0
Specific � -
POWER SUPPLY
Standard : 230VAC/50-60Hz � 0
115VAC/50-60Hz � 1
Power Over Ethernet (POE) � 7
Low voltage power supply : 12 VDC � 2
Low voltage power supply : 24 VDC � 4
Low voltage power supply : 48 VDC � 6
OPTIONS
Stop clock function via WEB interface � F
Timer : touch housing control block (flush and wall mount version) + 4 meters of cable - up/down
� I
Timer case + 15 m of cable � C
Temperature probe(accuracy ± 0.5°C) + 5 m cable : temperature and hour displayed alternately
� T
Time beep output, or contact relays for end of timer � E
ASCII RS232 output(do not associate with Ascii input version) � A
or : ASCII RS422-485 output(do not associate with Ascii input version) � R
Tropicalized � U
Specification � S
Ref : BDR_UK3-8_LEDI-Calendar-V3.2 -priceless All technical changes, aesthetic, colour can be made without prior notice. 15
LEDICA® ALPHA 7.M.S
Indoor / Single face
Professional LED clock with tri-color display, robust and stylish combining the best of the technology for an easy installation and operation.
Time Setting The professional LEDICA ® clocks can display the same time information, synchronized by a master clock or a time server. On standalone and pulse version, the time setting is manual.
Internal time base The LEDICA ® clock has its own temperature compensated TCXO time base which allows an accuracy about 0.1 sec / day between 0° to 40°C in case of synchronization loss.
Security Backup of time information in case of mains absence, by lithium battery : 10 years.
Specification
Power supply 230 VAC/50-60 Hz 115 VAC/50-60 Hz Low voltage 12, 24 or 48 VDC NTP POE (Power Over Ethernet)
Certification CE, EN 60950, EN 55022, EN 55024, ROHS.
Maximum consumption
16,58 VA
IP 30
MTBF 46 267 h.
MTTR Display : 5 min. CPU : 5 min. Power supply : 5 min.
Weight 3 kg
Dimension 760x220x62mm (LxHxD)
Digit height Hour/ minute : 70 mm Second : 50 mm Date : 50 mm (Alphanumeric display for day and month)
Maximal distance of legibility
35 meters
Shock resistance IK9
Operating temperature
-20° to 50°C
Electrical equipment classification Class 2
Display / LED specifications SMD Technology, Viewing Angle: 160°.
bi-colored LED (red green) monochrome LED
Red : 245 mcd Yellow
Blue : 625 mcd
Green : 780 mcd White : 625 mcd
Key features Perfectly silent, direct and accurate reading of time. SMD bi-colour LED technology allows to change the display colour in red, green or yellow (optional white or blue). The patented technology of the light guide provides a perfect regularity of the brightness and viewing angle at 160 °. The front face of the LEDICA ® is coated with an antiglare and anti-scratch film giving an extraordinary 60000 : 1 level of contrast. Pre-programmed calendar available in 11 languages. An anodized aluminium case wall mount (screw lock) ,flush mount or bracket mount. A protection against over-voltage and industrial interference via EMC filter. An easy "plug and play" installation. Its participation in the sustainable development life span over 20 years. 2 years warranty.
Remote management (with NTP synchronization) Remote configuration and time setting via WEB interface. Automatic time zone choice and daylight saving time change. Supervision via HTTP, SNMP, Telnet. “GT Network Manager” (Windows® NT/XP/2000/Vista (32 bits)/Windows 7).
Synchronization inputs
• Standalone TCXO quartz time base.
• DCF(EUROPE).
• France Inter (EUROPE).
• GPS.
• Pulse 24V reversed parallel minute or serial reversed 1/2 minute pulses.
• AFNOR NFS 87500
• IRIG B : shall be specified on Purchase order.
• ASCII RS232, ASCII RS422/485.
• DHW 869.525 Mhz.
• NTP Ethernet 10/100BaseT automatic detection :RJ45.
• NTP POE (Power Over Ethernet).
• SMPTE.
• Wi-Fi(IEEE 802.11B/G standard)
Ref : BDR_UK3-8_LEDI-Calendar-V3.2 -priceless 16 All technical changes, aesthetic, colour can be made without prior notice.
LEDICA® ALPHA 7.M.S Indoor / Single face
ITEM CODE
N3003 / VERSION � � � � � �
Standalone : TCXO quartz radiosynchronizable time base Accuracy +/- 0.1 sec/24 h (between 0°C and 40°C)
� 2
DCF Radiosynchronization. Antenna + 4m of cable � D
GPS Antenna + 10m of cable � G
24V reversed parallel minute pulses receiver clock � 3
Minute 60V receiver � V
Serial reversed 1/2 minute pulses receiver clock Consumption 1.25V. 60 to 120mA. 39 ohms shunt
� 5
AFNOR NFS 87500* receiver clock � 8
SMPTE-EBU receiver clock � 7
ASCII RS 232 receiver clock � B
ASCII 422/485 receiver clock � Q
DHW 869.525 Mhz Synchronization � L
NTP Ethernet 10/100 base T Synchronization � N
Wi-Fi(IEEE 802.11B/G standard) � W *IRIG.B Version: to be specified as « remark » on your Purchase Order.
CONFIGURABLE LED
Configurable colour : red, yellow, green � 1
Configurable colour : white or blue � 5
MOUNTING
Standard : wall mount** � 1
Flush mount � 3
** Please refer to the brackets technical sheet
COLOUR OF CASE
Standard : anodized aluminium � 7
Black painted aluminium � 0
Specific � -
POWER SUPPLY
Standard : 230VAC/50-60Hz � 0
115VAC/50-60Hz � 1
Power Over Ethernet (POE) � 7
Low voltage power supply : 12 VDC � 2
Low voltage power supply : 24 VDC � 4
Low voltage power supply : 48 VDC � 6
OPTIONS
Stop clock function via WEB interface � F
Timer : touch housing control block (flush and wall mount version) + 4 meters of cable - up/down
� I
Timer case + 15 m of cable � C
Temperature probe(accuracy ± 0.5°C) + 5 m cable : temperature and hour displayed alternately
� T
Time beep output, or contact relays for end of timer � E
ASCII RS232 output(do not associate with Ascii input version) � A
or : ASCII RS422-485 output(do not associate with Ascii input version) � R
Tropicalized � U
Specification � D
Ref : BDR_UK3-8_LEDI-Calendar-V3.2 -priceless All technical changes, aesthetic, colour can be made without prior notice. 17
LEDICA® ALPHA REVERSO 7.M.S
Indoor / Double face
Professional LED clock with tri-color display, robust and stylish combining the best of the technology for an easy installation and operation.
Time setting The professional LEDICA ® clocks can display the same time information, synchronized by a master clock or a time server. On standalone and pulse version, the time setting is manual.
Internal time base The LEDICA ® clock has its own temperature compensated TCXO time base which allows an accuracy about 0.1 sec / day between 0° to 40°C in case of synchronization loss.
Security Backup of time information in case of mains absence, by lithium battery : 10 years.
Specification
Power supply 230 VAC/50-60 Hz 115 VAC/50-60 Hz Low voltage 12, 24 or 48 VDC NTP POE (Power Over Ethernet)
Certification CE, EN 60950, EN 55022, EN 55024, ROHS.
Maximum consumption
19,89 VA
IP 30
MTBF 46 267 h.
MTTR Display : 5 min. CPU : 5 min. Power supply : 5 min.
Weight 3,0 – 3,5 kg
Dimension 760x220x99 mm (LxHxD) Mounting bracket : 150 mm
Digit height Hour/minute : 70 mm Second : 50 mm Date : 50 mm (Alphanumeric display for day and month)
Maximal distance of legibility
35 meters
Shock resistance IK9
Operating temperature
-20° to 50°C
Electrical equipment classification Class 2
Display / LED specifications SMD Technology, Viewing Angle: 160°.
bi-colored LED (red green) monochrome LED
Red : 245 mcd Yellow
Blue : 625 mcd
Green : 780 mcd White : 625 mcd
Key features Perfectly silent, direct and accurate reading of time. SMD bi-colour LED technology allows to change the display colour in red, green or yellow (optional white or blue). The patented technology of the light guide provides a perfect regularity of the brightness and viewing angle at 160 °. The front face of the LEDICA ® is coated with an antiglare and anti-scratch film giving an extraordinary 60000 : 1 level of contrast. A protection against over-voltage and industrial interference via EMC filter. Pre-programmed calendar available in 11 languages. Anodized aluminium case : Double face IP30 on bracket. An easy "plug and play" installation. Its participation in the sustainable development life span over 20 years. 2 years warranty.
Remote management (with NTP synchronization) Remote configuration and time setting via WEB interface. Automatic time zone choice and daylight saving time change. Supervision via HTTP, SNMP, Telnet. “GT Network Manager” (Windows® NT/XP/2000/Vista (32 bits)/Windows 7).
Synchronization inputs
• Standalone TCXO quartz time base.
• DCF(EUROPE).
• France Inter (EUROPE).
• GPS.
• Pulse 24V reversed parallel minute or serial reversed 1/2 minute pulses.
• AFNOR NFS 87500
• IRIG B : shall be specified on Purchase order.
• ASCII RS232, ASCII RS422/485.
• DHW 869.525 Mhz.
• NTP Ethernet 10/100BaseT automatic detection :RJ45.
• NTP POE (Power Over Ethernet).
• SMPTE.
• Wi-Fi(IEEE 802.11B/G standard)
150
Ref : BDR_UK3-8_LEDI-Calendar-V3.2 -priceless 18 All technical changes, aesthetic, colour can be made without prior notice.
LEDICA® ALPHA REVERSO 7.M.S Indoor / Double face
ITEM CODE
ND3003 / 2 DISPLAY � � � � � � �
Double face 2
VERSION
Standalone : TCXO quartz radiosynchronizable time base Accuracy +/- 0.1 sec/24 h (between 0°C and 40°C)
� 2
DCF Radiosynchronization. Antenna + 4m of cable � D
GPS Antenna + 10m of cable � G
24V reversed parallel minute pulses receiver clock � 3
Minute 60V receiver � V
Serial reversed 1/2 minute pulses receiver clock Consumption 1.25V. 60 to 120mA. 39 ohms shunt
� 5
AFNOR NFS 87500* receiver clock � 8
SMPTE-EBU receiver clock � 7
ASCII RS 232 receiver clock � B
ASCII 422/485 receiver clock � Q
DHW 869.525 Mhz Synchronization � L
NTP Ethernet 10/100 base T Synchronization � N
Wi-Fi(IEEE 802.11B/G standard) � W
*IRIG.B Version: to be specified as « remark » on your Purchase Order.
CONFIGURABLE LED
Configurable colour : red, yellow, green � 1
Configurable colour : white or blue � 5
MOUNTING
To be associated with requested brackets ** � P
** Please refer to the brackets technical sheet
COLOUR OF CASE
Standard : anodized aluminium � 7
Black painted aluminium � 0
Specific � -
POWER SUPPLY
Standard : 230VAC/50-60Hz � 0
115VAC/50-60Hz � 1
Power Over Ethernet (POE) � 7
Low voltage power supply : 12 VDC � 2
Low voltage power supply : 24 VDC � 4
Low voltage power supply : 48 VDC � 6
OPTIONS
Stop clock function via WEB interface � F
Timer : touch housing control block (flush and wall mount version) + 4 meters of cable - up/down
� I
Timer case + 15 m of cable � C
Temperature probe(accuracy ± 0.5°C) + 5 m cable : temperature and hour displayed alternately
� T
Time beep output, or contact relays for end of timer � E
ASCII RS232 output(do not associate with Ascii input version) � A
or : ASCII RS422-485 output(do not associate with Ascii input version) � R
Tropicalized � U
Specification � S
Ref : BDR_UK3-8_LEDI-Calendar-V3.2 -priceless All technical changes, aesthetic, colour can be made without prior notice. 19
LEDICA® ALPHA CARREE 7.M
Indoor / Single face
Professional LED clock with tri-color display, robust and stylish combining the best of the technology for an easy installation and operation.
Time Setting The professional LEDICA ® clocks can display the same time information, synchronized by a master clock or a time server. On standalone and pulse version, the time setting is manual.
Internal time base The LEDICA ® clock has its own temperature compensated TCXO time base which allows an accuracy about 0.1 sec / day between 0° to 40°C in case of synchronization loss.
Security Backup of time information in case of mains absence, by lithium battery : 10 years.
Specification
Power supply 230 VAC/50-60 Hz 115 VAC/50-60 Hz Low voltage 12, 24 or 48 VDC NTP POE (Power Over Ethernet)
Certification CE, EN 60950, EN 55022, EN 55024, ROHS.
Maximum consumption
14.78 VA
IP 30
MTBF 46 267 h
MTTR Display : 5 min. CPU : 5 min. Power supply : 5 min.
Weight 3 kg
Dimension 390x390x62 mm (LxHxD)
Digit height Hour / minute : 70 mm Date : 50 mm (Alphanumeric display for day and month)
Maximal distance of legibility
35 meters
Shock resistance IK9
Operating temperature
-20° to 50°C
Electrical equipment classification Class 2
Display / LED specifications SMD Technology, Viewing Angle: 160°.
bi-colored LED (red green) monochrome LED
Red : 245 mcd Yellow
Blue : 625 mcd
Green : 780 mcd White : 625 mcd
Key features Perfectly silent, direct and accurate reading of time. SMD bi-colour LED technology allows to change the display colour in red, green or yellow (optional white or blue). The patented technology of the light guide provides a perfect regularity of the brightness and viewing angle at 160 °. The front face of the LEDICA ® is coated with an antiglare and anti-scratch film giving an extraordinary 60000 : 1 level of contrast. Pre-programmed calendar available in 11 languages. An anodized aluminium case wall mount (screw lock) ,flush mount or bracket mount. A protection against over-voltage and industrial interference via EMC filter. An easy "plug and play" installation. Its participation in the sustainable development life span over 20 years. 2 years warranty.
Remote management (with NTP synchronization) Remote configuration and time setting via WEB interface. Automatic time zone choice and daylight saving time change. Supervision via HTTP, SNMP, Telnet. “GT Network Manager” (Windows® NT/XP/2000/Vista (32 bits)/ Windows 7).
Synchronization inputs
• Standalone TCXO quartz time base.
• DCF(EUROPE).
• France Inter (EUROPE).
• GPS.
• Pulse 24V reversed parallel minute or serial reversed 1/2 minute pulses.
• AFNOR NFS 87500
• IRIG B : shall be specified on Purchase order.
• ASCII RS232, ASCII RS422/485.
• DHW 869.525 Mhz.
• NTP Ethernet 10/100BaseT automatic detection :RJ45.
• NTP POE (Power Over Ethernet).
• SMPTE.
• Wi-Fi(IEEE 802.11B/G standard)
Ref : BDR_UK3-8_LEDI-Calendar-V3.2 -priceless 20 All technical changes, aesthetic, colour can be made without prior notice.
LEDICA® ALPHA CARREE 7.M Indoor / Single face
ITEM CODE
N306 / VERSION � � � � � �
Standalone : TCXO quartz radiosynchronizable time base Accuracy +/- 0.1 sec/24 h (between 0°C and 40°C)
� 2
DCF Radiosynchronization. Antenna + 4m of cable � D
GPS Antenna + 10m of cable � G
24V reversed parallel minute pulses receiver clock � 3
Minute 60V receiver � V
Serial reversed 1/2 minute pulses receiver clock Consumption 1.25V. 60 to 120mA. 39 ohms shunt
� 5
AFNOR NFS 87500* receiver clock � 8
SMPTE-EBU receiver clock � 7
ASCII RS 232 receiver clock � B
ASCII 422/485 receiver clock � Q
DHW 869.525 Mhz Synchronization � L
NTP Ethernet 10/100 base T Synchronization � N
Wi-Fi(IEEE 802.11B/G standard) � W *IRIG.B Version: to be specified as « remark » on your Purchase Order.
CONFIGURABLE LED
Configurable colour : red, yellow, green � 1
Configurable colour : white or blue � 5
MOUNTING
Standard : wall mount** � 1
Flush mount � 3
** Please refer to the brackets technical sheet
COLOUR OF CASE
Standard : anodized aluminium � 7
Black painted aluminium � 0
Specific � -
POWER SUPPLY
Standard : 230VAC/50-60Hz � 0
115VAC/50-60Hz � 1
Power Over Ethernet (POE) � 7
Low voltage power supply : 12 VDC � 2
Low voltage power supply : 24 VDC � 4
Low voltage power supply : 48 VDC � 6
OPTIONS
Stop clock function via WEB interface � F
Timer : touch housing control block (flush and wall mount version) + 4 meters of cable - up/down
� I
Timer case + 15 m of cable � C
Temperature probe(accuracy ± 0.5°C) + 5 m cable : temperature and hour displayed alternately
� T
Time beep output, or contact relays for end of timer � E
ASCII RS232 output(do not associate with Ascii input version) � A
or : ASCII RS422-485 output(do not associate with Ascii input version) � R
Tropicalized � U
Specification � D
Ref : BDR_UK3-8_LEDI-Calendar-V3.2 -priceless All technical changes, aesthetic, colour can be made without prior notice. 21
LEDICA® ALPHA CARREE REVERSO 7.M
Indoor / Double face
Professional LED clock with tri-color display, robust and stylish combining the best of the technology for an easy installation and operation.
Time Setting The professional LEDICA ® clocks can display the same time information, synchronized by a master clock or a time server. On standalone and pulse version, the time setting is manual.
Internal time base The LEDICA ® clock has its own temperature compensated TCXO time base which allows an accuracy about 0.1 sec / day between 0° to 40°C in case of synchronization loss.
Security Backup of time information in case of mains absence, by lithium battery : 10 years.
Specification
Power supply 230VAC/50-60Hz 115VAC/50-60Hz Low voltage 12, 24 or 48 Volts NTP POE (Power Over Ethernet)
Certification CE, EN 60950, EN 55022, EN 55024, ROHS.
Maximum consumption
17.73 VA
IP 30 (standard version), 54 (waterproof option)
MTBF 46 267 h.
MTTR Display : 5 min. CPU : 5 min. Power supply : 5 min.
Weight 3,0 – 3,5 kg
Dimension 390x390x99 mm (LxHxD)
Digit height Hour / minute : 70 mm Date : 50 mm (Alphanumeric display for day and month)
Maximal distance of legibility
35 meters
Shock resistance IK9
Operating temperature
-20° to 50°C
Electrical equipment classification Class 2
Display / LED specifications SMD Technology, Viewing Angle: 160°.
bi-colored LED (red green) monochrome LED
Red : 245 mcd Yellow
Blue : 625 mcd
Green : 780 mcd White : 625 mcd
Key features Perfectly silent, direct and accurate reading of time. SMD bi-colour LED technology allows to change the display colour in red, green or yellow (optional white or blue). The patented technology of the light guide provides a perfect regularity of the brightness and viewing angle at 160 °. The front face of the LEDICA ® is coated with an antiglare and anti-scratch film giving an extraordinary 60000 : 1 level of contrast. A protection against over-voltage and industrial interference via EMC filter. Pre-programmed calendar available in 11 languages. Anodized aluminium case : Double face IP30 on bracket. An easy "plug and play" installation. Its participation in the sustainable development life span over 20 years. 2 years warranty.
Remote management (with NTP synchronization) Remote configuration and time setting via WEB interface. Automatic time zone choice and daylight saving time change. Supervision via HTTP, SNMP, Telnet. “GT Network Manager” (Windows® NT/XP/2000/Vista (32 bits)/ Windows 7).
Synchronization inputs
• Standalone TCXO quartz time base.
• DCF(EUROPE).
• France Inter (EUROPE).
• GPS.
• Pulse 24V reversed parallel minute or serial reversed 1/2 minute pulses.
• AFNOR NFS 87500
• IRIG B : shall be specified on Purchase order.
• ASCII RS232, ASCII RS422/485.
• DHW 869.525 Mhz.
• NTP Ethernet 10/100BaseT automatic detection :RJ45.
• NTP POE (Power Over Ethernet).
• SMPTE.
• Wi-Fi(IEEE 802.11B/G standard)
150
Ref : BDR_UK3-8_LEDI-Calendar-V3.2 -priceless 22 All technical changes, aesthetic, colour can be made without prior notice.
LEDICA® ALPHA CARREE REVERSO 7.M Indoor / Double face
ITEM CODE
ND306 / 2 DISPLAY � � � � � � �
Double face 2
VERSION
Standalone : TCXO quartz radiosynchronizable time base Accuracy +/- 0.1 sec/24 h (between 0°C and 40°C)
� 2
DCF Radiosynchronization. Antenna + 4m of cable � D
GPS Antenna + 10m of cable � G
24V reversed parallel minute pulses receiver clock � 3
Minute 60V receiver � V
Serial reversed 1/2 minute pulses receiver clock Consumption 1.25V. 60 to 120mA. 39 ohms shunt
� 5
AFNOR NFS 87500* receiver clock � 8
SMPTE-EBU receiver clock � 7
ASCII RS 232 receiver clock � B
ASCII 422/485 receiver clock � Q
DHW 869.525 Mhz Synchronization � L
NTP Ethernet 10/100 base T Synchronization � N
Wi-Fi(IEEE 802.11B/G standard) � W *IRIG.B Version: to be specified as « remark » on your Purchase Order.
CONFIGURABLE LED
Configurable colour : red, yellow, green � 1
Configurable colour : white or blue � 5
MOUNTING
To be associated with requested brackets ** � P
** Please refer to the brackets technical sheet
COLOUR OF CASE
Standard : anodized aluminium � 7
Black painted aluminium � 0
Specific � -
POWER SUPPLY
Standard : 230VAC/50-60Hz � 0
115VAC/50-60Hz � 1
Power Over Ethernet (POE) � 7
Low voltage power supply : 12 VDC � 2
Low voltage power supply : 24 VDC � 4
Low voltage power supply : 48 VDC � 6
OPTIONS
Stop clock function via WEB interface � F
Timer : touch housing control block (flush and wall mount version) + 4 meters of cable - up/down
� I
Timer case + 15 m of cable � C
Temperature probe(accuracy ± 0.5°C) + 5 m cable : temperature and hour displayed alternately
� T
Time beep output, or contact relays for end of timer � E
ASCII RS232 output(do not associate with Ascii input version) � A
or : ASCII RS422-485 output(do not associate with Ascii input version) � R
Tropicalized � U
Specification � S
Ref : BDR_UK3-8_LEDI-Calendar-V3.2 -priceless All technical changes, aesthetic, colour can be made without prior notice. 23
LEDICA® ALPHA 7.60.M Indoor / Single face
Professional LED clock with tri-color display, robust and stylish combining the best of the technology for an easy installation and operation.
Time Setting The professional LEDICA ® clocks can display the same time information, synchronized by a master clock or a time server. On standalone and pulse version, the time setting is manual.
Internal time base The LEDICA ® clock has its own temperature compensated TCXO time base which allows an accuracy about 0.1 sec / day between 0° to 40°C in case of synchronization loss.
Security Backup of time information in case of mains absence, by lithium battery : 10 years.
Specification
Power supply 230VAC/50-60Hz 115VAC/50-60Hz Low voltage 12, 24 or 48 VDC NTP POE (Power Over Ethernet)
Certification CE, EN 60950, EN 55022, EN 55024, ROHS.
Maximum consumption
14,99 VA
IP 30
MTBF 46 267 h.
MTTR Display : 5 min. CPU : 5 min. Power supply : 5 min.
Weight 3,9 kg
Dimension 390x550x62 mm (LxHxD)
Digit height Hour/ minute : 70 mm Wave of seconds : 60 points Date : 50 mm
Maximal distance of legibility
35 meters
Shock resistance IK9
Operating temperature
-20° to 50°C
Electrical equipment classification Class 2
Display / LED specifications SMD Technology, Viewing Angle: 160°.
bi-colored LED (red green) monochrome LED
Red : 245 mcd Yellow
Blue : 625 mcd
Green : 780 mcd White : 625 mcd
Key features Perfectly silent, direct and accurate reading of time. SMD bi-colour LED technology allows to change the display colour in red, green or yellow (optional white or blue). The patented technology of the light guide provides a perfect regularity of the brightness and viewing angle at 160 °. The front face of the LEDICA ® is coated with an antiglare and anti-scratch film giving an extraordinary 60000 : 1 level of contrast. Pre-programmed calendar available in 11 languages. An anodized aluminium case wall mount (screw lock) ,flush mount or bracket mount. A protection against over-voltage and industrial interference via EMC filter. An easy "plug and play" installation. Its participation in the sustainable development life span over 20 years. 2 years warranty.
Remote management (with NTP synchronization) Remote configuration and time setting via WEB interface. Automatic time zone choice and daylight saving time change. Supervision via HTTP, SNMP, Telnet. “GT Network Manager” (Windows® NT/XP/2000/Vista (32 bits)/ Windows 7).
Synchronization inputs
• Standalone TCXO quartz time base.
• DCF(EUROPE).
• France Inter (EUROPE).
• GPS.
• Pulse 24V reversed parallel minute or serial reversed 1/2 minute pulses.
• AFNOR NFS 87500
• IRIG B : shall be specified on Purchase order.
• ASCII RS232, ASCII RS422/485.
• DHW 869.525 Mhz.
• NTP Ethernet 10/100BaseT automatic detection :RJ45.
• NTP POE (Power Over Ethernet).
• SMPTE.
• Wi-Fi(IEEE 802.11B/G standard)
Ref : BDR_UK3-8_LEDI-Calendar-V3.2 -priceless 24 All technical changes, aesthetic, colour can be made without prior notice.
LEDICA® ALPHA 7.60.M
Indoor / Single face
ITEM CODE
N3001 / VERSION � � � � � �
Standalone : TCXO quartz radiosynchronizable time base Accuracy +/- 0.1 sec/24 h (between 0°C and 40°C)
� 2
DCF Radiosynchronization. Antenna + 4m of cable � D
GPS Antenna + 10m of cable � G
24V reversed parallel minute pulses receiver clock � 3
Minute 60V receiver � V
Serial reversed 1/2 minute pulses receiver clock Consumption 1.25V. 60 to 120mA. 39 ohms shunt
� 5
AFNOR NFS 87500* receiver clock � 8
SMPTE-EBU receiver clock � 7
ASCII RS 232 receiver clock � B
ASCII 422/485 receiver clock � Q
DHW 869.525 Mhz Synchronization � L
NTP Ethernet 10/100 base T Synchronization � N
Wi-Fi(IEEE 802.11B/G standard) � W *IRIG.B Version: to be specified as « remark » on your Purchase Order.
CONFIGURABLE LED
Configurable colour : red, yellow, green � 1
Configurable colour : white or blue � 5
MOUNTING
Standard : wall mount** � 1
Flush mount � 3
** Please refer to the brackets technical sheet
COLOUR OF CASE
Standard : anodized aluminium � 7
Black painted aluminium � 0
Specific � -
POWER SUPPLY
Standard : 230VAC/50-60Hz � 0
115VAC/50-60Hz � 1
Power Over Ethernet (POE) � 7
Low voltage power supply : 12 VDC � 2
Low voltage power supply : 24 VDC � 4
Low voltage power supply : 48 VDC � 6
OPTIONS
Stop clock function via WEB interface � F
Timer : touch housing control block (flush and wall mount version) + 4 meters of cable - up/down
� I
Timer case + 15 m of cable � C
Temperature probe(accuracy ± 0.5°C) + 5 m cable : temperature and hour displayed alternately
� T
Time beep output, or contact relays for end of timer � E
ASCII RS232 output(do not associate with Ascii input version) � A
or : ASCII RS422-485 output(do not associate with Ascii input version) � R
Tropicalized � U
Specification � D
Ref : BDR_UK3-8_LEDI-Calendar-V3.2 -priceless All technical changes, aesthetic, colour can be made without prior notice. 25
LEDICA®ALPHA REVERSO 7.60.M
Indoor / Double face
Professional LED clock with tri-color display, robust and stylish combining the best of the technology for an easy installation and operation.
Time Setting The professional LEDICA ® clocks can display the same time information, synchronized by a master clock or a time server. On standalone and pulse version, the time setting is manual.
Internal time base The LEDICA ® clock has its own temperature compensated TCXO time base which allows an accuracy about 0.1 sec / day between 0° to 40°C in case of synchronization loss.
Security Backup of time information in case of mains absence, by lithium battery : 10 years.
Specification
Power supply 230VAC/50-60Hz 115VAC/50-60Hz Low voltage 12, 24 or 48 VDC NTP POE (Power Over Ethernet)
Certification CE, EN 60950, EN 55022, EN 55024, ROHS.
Maximum consumption
17,99 VA
IP 30
MTBF 46 267 h.
MTTR Display : 5 min. CPU : 5 min. Power supply : 5 min.
Weight 3.9 – 4.4 kg
Dimension 390x550x99 mm (LxHxD) Mounting bracket : 150 mm
Digit height Hour/minute : 70 mm Wave of seconds : 60 points Date : 50 mm
Maximal distance of legibility
35 meters
Shock resistance IK9
Operating temperature
-20° to 50°C
Electrical equipment classification Class 2
Display / LED specifications SMD Technology, Viewing Angle: 160°.
bi-colored LED (red green) monochrome LED
Red : 245 mcd Yellow
Blue : 625 mcd
Green : 780 mcd White : 625 mcd
Key feature Perfectly silent, direct and accurate reading of time. SMD bi-colour LED technology allows to change the display colour in red, green or yellow (optional white or blue). The patented technology of the light guide provides a perfect regularity of the brightness and viewing angle at 160 °. The front face of the LEDICA ® is coated with an antiglare and anti-scratch film giving an extraordinary 60000 : 1 level of contrast. A protection against over-voltage and industrial interference via EMC filter. Pre-programmed calendar available in 11 languages. Anodized aluminium case : Double face IP30 on bracket. An easy "plug and play" installation. Its participation in the sustainable development life span over 20 years. 2 years warranty.
Remote management (with NTP synchronization) Remote configuration and time setting via WEB interface. Automatic time zone choice and daylight saving time change. Supervision via HTTP, SNMP, Telnet. “GT Network Manager” (Windows® NT/XP/2000/Vista (32 bits)/ Windows 7).
Synchronization inputs
• Standalone TCXO quartz time base.
• DCF(EUROPE).
• France Inter (EUROPE).
• GPS.
• Pulse 24V reversed parallel minute or serial reversed 1/2 minute pulses.
• AFNOR NFS 87500
• IRIG B : shall be specified on Purchase order.
• ASCII RS232, ASCII RS422/485.
• DHW 869.525 Mhz.
• NTP Ethernet 10/100BaseT automatic detection :RJ45.
• NTP POE (Power Over Ethernet).
• SMPTE.
• Wi-Fi(IEEE 802.11B/G standard)
150
Ref : BDR_UK3-8_LEDI-Calendar-V3.2 -priceless 26 All technical changes, aesthetic, colour can be made without prior notice.
LEDI® ALPHA REVERSO 7.60.M Indoor / Double face
ITEM CODE
ND3001 / 2 DISPLAY � � � � � � �
Double face 2
VERSION
Standalone : TCXO quartz radiosynchronizable time base Accuracy +/- 0.1 sec/24 h (between 0°C and 40°C)
� 2
DCF Radiosynchronization. Antenna + 4m of cable � D
GPS Antenna + 10m of cable � G
24V reversed parallel minute pulses receiver clock � 3
Minute 60V receiver � V
Serial reversed 1/2 minute pulses receiver clock Consumption 1.25V. 60 to 120mA. 39 ohms shunt
� 5
AFNOR NFS 87500* receiver clock � 8
SMPTE-EBU receiver clock � 7
ASCII RS 232 receiver clock � B
ASCII 422/485 receiver clock � Q
DHW 869.525 Mhz Synchronization � L
NTP Ethernet 10/100 base T Synchronization � N
Wi-Fi(IEEE 802.11B/G standard) � W
*IRIG.B Version: to be specified as « remark » on your Purchase Order.
CONFIGURABLE LED
Configurable colour : red, yellow, green � 1
Configurable colour : white or blue � 5
MOUNTING
To be associated with requested brackets ** � P
** Please refer to the brackets technical sheet
COLOUR OF CASE
Standard : anodized aluminium � 7
Black painted aluminium � 0
Specific � -
POWER SUPPLY
Standard : 230VAC/50-60Hz � 0
115VAC/50-60Hz � 1
Power Over Ethernet (POE) � 7
Low voltage power supply : 12 VDC � 2
Low voltage power supply : 24 VDC � 4
Low voltage power supply : 48 VDC � 6
OPTIONS
Stop clock function via WEB interface � F
Timer : touch housing control block (flush and wall mount version) + 4 meters of cable - up/down
� I
Timer case + 15 m of cable � C
Temperature probe(accuracy ± 0.5°C) + 5 m cable : temperature and hour displayed alternately
� T
Time beep output, or contact relays for end of timer � E
ASCII RS232 output(do not associate with Ascii input version) � A
or : ASCII RS422-485 output(do not associate with Ascii input version) � R
Tropicalized � U
Specification � S
Ref : BDR_UK3-8_LEDI-Calendar-V3.2 -priceless All technical changes, aesthetic, colour can be made without prior notice. 27
LEDICA® ALPHA 7.60.M.S
Indoor / Single face
Professional LED clock with tri-color display, robust and stylish combining the best of the technology for an easy installation and operation.
Time Setting The professional LEDICA ® clocks can display the same time information, synchronized by a master clock or a time server. On standalone and pulse version, the time setting is manual.
Internal time base The LEDICA ® clock has its own temperature compensated TCXO time base which allows an accuracy about 0.1 sec / day between 0° to 40°C in case of synchronization loss.
Security Backup of time information in case of mains absence, by lithium battery : 10 years.
Specification
Power supply 230VAC/50-60Hz 115VAC/50-60Hz Low voltage 12, 24 or 48 VDC NTP POE (Power Over Ethernet)
Certification CE, EN 60950, EN 55022, EN 55024, ROHS.
Maximum consumption
16,29 VA
IP 30
MTBF 46 267 h.
MTTR Display : 5 min. CPU : 5 min. Power supply : 5 min.
Weight 3,9 kg
Dimension 390x550x62 mm (LxHxD)
Digit height Hour/ minute : 70 mm Second : 50 mm Wave of seconds : 60 points Date : 50 mm
Maximal distance of legibility
35 meters
Shock resistance IK9
Operating temperature
-20° to 50°C
Electrical equipment classification Class 2
Display / LED specifications SMD Technology, Viewing Angle: 160°.
bi-colored LED (red green) monochrome LED
Red : 245 mcd Yellow
Blue : 625 mcd
Green : 780 mcd White : 625 mcd
Key features Perfectly silent, direct and accurate reading of time. SMD bi-colour LED technology allows to change the display colour in red, green or yellow (optional white or blue). The patented technology of the light guide provides a perfect regularity of the brightness and viewing angle at 160 °. The front face of the LEDICA ® is coated with an antiglare and anti-scratch film giving an extraordinary 60000 : 1 level of contrast. Pre-programmed calendar available in 11 languages. An anodized aluminium case wall mount (screw lock) ,flush mount or bracket mount. A protection against over-voltage and industrial interference via EMC filter. An easy "plug and play" installation. Its participation in the sustainable development life span over 20 years. 2 years warranty.
Remote management (with NTP synchronization) Remote configuration and time setting via WEB interface. Automatic time zone choice and daylight saving time change. Supervision via HTTP, SNMP, Telnet. “GT Network Manager” (Windows® NT/XP/2000/Vista (32 bits)/ Windows 7).
Synchronization inputs
• Standalone TCXO quartz time base.
• DCF(EUROPE).
• France Inter (EUROPE).
• GPS.
• Pulse 24V reversed parallel minute or serial reversed 1/2 minute pulses.
• AFNOR NFS 87500
• IRIG B : shall be specified on Purchase order.
• ASCII RS232, ASCII RS422/485.
• DHW 869.525 Mhz.
• NTP Ethernet 10/100BaseT automatic detection :RJ45.
• NTP POE (Power Over Ethernet).
• SMPTE.
• Wi-Fi(IEEE 802.11B/G standard)
Ref : BDR_UK3-8_LEDI-Calendar-V3.2 -priceless 28 All technical changes, aesthetic, colour can be made without prior notice.
LEDICA® ALPHA 7.60.M.S Indoor / Single face
ITEM CODE
N3004 / VERSION � � � � � �
Standalone : TCXO quartz radiosynchronizable time base Accuracy +/- 0.1 sec/24 h (between 0°C and 40°C)
� 2
DCF Radiosynchronization. Antenna + 4m of cable � D
GPS Antenna + 10m of cable � G
24V reversed parallel minute pulses receiver clock � 3
Minute 60V receiver � V
Serial reversed 1/2 minute pulses receiver clock Consumption 1.25V. 60 to 120mA. 39 ohms shunt
� 5
AFNOR NFS 87500* receiver clock � 8
SMPTE-EBU receiver clock � 7
ASCII RS 232 receiver clock � B
ASCII 422/485 receiver clock � Q
DHW 869.525 Mhz Synchronization � L
NTP Ethernet 10/100 base T Synchronization � N
Wi-Fi(IEEE 802.11B/G standard) � W *IRIG.B Version: to be specified as « remark » on your Purchase Order.
CONFIGURABLE LED
Configurable colour : red, yellow, green � 1
Configurable colour : white or blue � 5
MOUNTING
Standard : wall mount** � 1
Flush mount � 3
** Please refer to the brackets technical sheet
COLOUR OF CASE
Standard : anodized aluminium � 7
Black painted aluminium � 0
Specific � -
POWER SUPPLY
Standard : 230VAC/50-60Hz � 0
115VAC/50-60Hz � 1
Power Over Ethernet (POE) � 7
Low voltage power supply : 12 VDC � 2
Low voltage power supply : 24 VDC � 4
Low voltage power supply : 48 VDC � 6
OPTIONS
Stop clock function via WEB interface � F
Timer : touch housing control block (flush and wall mount version) + 4 meters of cable - up/down
� I
Timer case + 15 m of cable � C
Temperature probe(accuracy ± 0.5°C) + 5 m cable : temperature and hour displayed alternately
� T
Time beep output, or contact relays for end of timer � E
ASCII RS232 output(do not associate with Ascii input version) � A
or : ASCII RS422-485 output(do not associate with Ascii input version) � R
Tropicalized � U
Specification � D
Ref : BDR_UK3-8_LEDI-Calendar-V3.2 -priceless All technical changes, aesthetic, colour can be made without prior notice. 29
LEDICA® ALPHA REVERSO7.60.M.S
Indoor / Double face
Professional LED clock with tri-color display, robust and stylish combining the best of the technology for an easy installation and operation.
Time Setting The professional LEDICA ® clocks can display the same time information, synchronized by a master clock or a time server. On standalone and pulse version, the time setting is manual.
Internal time base The LEDICA ® clock has its own temperature compensated TCXO time base which allows an accuracy about 0.1 sec / day between 0° to 40°C in case of synchronization loss.
Security Backup of time information in case of mains absence, by lithium battery : 10 years.
Specification
Power supply 230VAC/50-60Hz 115VAC/50-60Hz Low voltage 12, 24 or 48 VDC NTP POE (Power Over Ethernet)
Certification CE, EN 60950, EN 55022, EN 55024, ROHS.
Maximal consumption
19,55 VA
IP 30
MTBF 46 267 h.
MTTR Display : 5 min. CPU : 5 min. Power supply : 5 min
Weight 3.9 – 4.4 kg
Dimension 390x550x99 mm (LxHxD) Mounting bracket : 150 mm
Digit height Hour/ minute : 70 mm Second : 50 mm Wave of seconds : 60 points Date : 50 mm
Maximal distance of legibility
35 meters
Shock resistance IK9
Operating temperature
-20° to 50°C
Electrical equipment classification Class 2
Display / LED specifications SMD Technology, Viewing Angle: 160°.
bi-colored LED (red green) monochrome LED
Red : 245 mcd Yellow
Blue : 625 mcd
Green : 780 mcd White : 625 mcd
Key features Perfectly silent, direct and accurate reading of time. SMD bi-colour LED technology allows to change the display colour in red, green or yellow (optional white or blue). The patented technology of the light guide provides a perfect regularity of the brightness and viewing angle at 160 °. The front face of the LEDICA ® is coated with an antiglare and anti-scratch film giving an extraordinary 60000 : 1 level of contrast. A protection against over-voltage and industrial interference via EMC filter. Pre-programmed calendar available in 11 languages. Anodized aluminium case : Double face IP30 on bracket. An easy "plug and play" installation. Its participation in the sustainable development life span over 20 years. 2 years warranty.
Remote management (with NTP synchronization) Remote configuration and time setting via WEB interface. Automatic time zone choice and daylight saving time change. Supervision via HTTP, SNMP, Telnet. “GT Network Manager” (Windows® NT/XP/2000/Vista (32 bits)/ Windows 7).
Synchronization inputs
• Standalone TCXO quartz time base.
• DCF(EUROPE).
• France Inter (EUROPE).
• GPS.
• Pulse 24V reversed parallel minute or serial reversed 1/2 minute pulses.
• AFNOR NFS 87500
• IRIG B : shall be specified on Purchase order.
• ASCII RS232, ASCII RS422/485.
• DHW 869.525 Mhz.
• NTP Ethernet 10/100BaseT automatic detection :RJ45.
• NTP POE (Power Over Ethernet).
• SMPTE.
• Wi-Fi(IEEE 802.11B/G standard)
150
Ref : BDR_UK3-8_LEDI-Calendar-V3.2 -priceless 30 All technical changes, aesthetic, colour can be made without prior notice.
LEDI® ALPHA REVERSO 7.60.M.S Indoor / Double face
ITEM CODE
ND3004 / 2 DISPLAY � � � � � � �
Double face 2
VERSION
Standalone : TCXO quartz radiosynchronizable time base Accuracy +/- 0.1 sec/24 h (between 0°C and 40°C)
� 2
DCF Radiosynchronization. Antenna + 4m of cable � D
GPS Antenna + 10m of cable � G
24V reversed parallel minute pulses receiver clock � 3
Minute 60V receiver � V
Serial reversed 1/2 minute pulses receiver clock Consumption 1.25V. 60 to 120mA. 39 ohms shunt
� 5
AFNOR NFS 87500* receiver clock � 8
SMPTE-EBU receiver clock � 7
ASCII RS 232 receiver clock � B
ASCII 422/485 receiver clock � Q
DHW 869.525 Mhz Synchronization � L
NTP Ethernet 10/100 base T Synchronization � N
Wi-Fi(IEEE 802.11B/G standard) � W
*IRIG.B Version: to be specified as « remark » on your Purchase Order.
CONFIGURABLE LED
Configurable colour : red, yellow, green � 1
Configurable colour : white or blue � 5
MOUNTING
To be associated with requested brackets ** � P
** Please refer to the brackets technical sheet
COLOUR OF CASE
Standard : anodized aluminium � 7
Black painted aluminium � 0
Specific � -
POWER SUPPLY
Standard : 230VAC/50-60Hz � 0
115VAC/50-60Hz � 1
Power Over Ethernet (POE) � 7
Low voltage power supply : 12 VDC � 2
Low voltage power supply : 24 VDC � 4
Low voltage power supply : 48 VDC � 6
OPTIONS
Stop clock function via WEB interface � F
Timer : touch housing control block (flush and wall mount version) + 4 meters of cable - up/down
� I
Timer case + 15 m of cable � C
Temperature probe(accuracy ± 0.5°C) + 5 m cable : temperature and hour displayed alternately
� T
Time beep output, or contact relays for end of timer � E
ASCII RS232 output(do not associate with Ascii input version) � A
or : ASCII RS422-485 output(do not associate with Ascii input version) � R
Tropicalized � U
Specification � S
Ref : BDR_UK3-8_LEDI-Calendar-V3.2 -priceless All technical changes, aesthetic, colour can be made without prior notice. 31
LEDICA® 10.M Indoor / Single face
Professional LED clock with tri-color display, robust and stylish combining the best of the technology for an easy installation and operation.
Time Setting The professional LEDICA ® clocks can display the same time information, synchronized by a master clock or a time server. On standalone and pulse version, the time setting is manual.
Internal time base The LEDICA ® clock has its own temperature compensated TCXO time base which allows an accuracy about 0.1 sec / day between 0° to 40°C in case of synchronization loss.
Security Backup of time information in case of mains absence, by lithium battery : 10 years.
Specification
Power supply 230 VAC/50-60 Hz 115 VAC/50-60 Hz Low voltage 12, 24 or 48 VDC NTP POE (Power Over Ethernet)
Certification CE, EN 60950, EN 55022, EN 55024, ROHS.
Maximal consumption
13,69 VA
IP 30
MTBF 46 267 h.
MTTR Display : 5 min. CPU : 5 min. Power supply : 5 min.
Weight 3,1 kg
Dimension 770x210x62 mm (LxHxD)
Digit height Hour/minute : 110 mm Date : 50 mm (Alphanumeric display for day and month)
Maximal distance of legibility
60 meters
Shock resistance IK9
Operating temperature
-20° to 50°C
Electrical equipment classification Class 2
Display / LED specifications SMD Technology, Viewing Angle: 160°.
bi-colored LED (red green) monochrome LED
Red : 245 mcd Yellow
Blue : 625 mcd
Green : 780 mcd White : 625 mcd
Key features Perfectly silent, direct and accurate reading of time. SMD bi-colour LED technology allows to change the display colour in red, green or yellow (optional white or blue). The patented technology of the light guide provides a perfect regularity of the brightness and viewing angle at 160 °. The front face of the LEDICA ® is coated with an antiglare and anti-scratch film giving an extraordinary 60000 : 1 level of contrast. Pre-programmed calendar available in 11 languages. An anodized aluminium case wall mount (screw lock) ,flush mount or bracket mount. A protection against over-voltage and industrial interference via EMC filter. An easy "plug and play" installation. Its participation in the sustainable development life span over 20 years. 2 years warranty.
Remote management (with NTP synchronization) Remote configuration and time setting via WEB interface. Automatic time zone choice and daylight saving time change. Supervision via HTTP, SNMP, Telnet. “GT Network Manager” (Windows® NT/XP/2000/Vista (32 bits)/ Windows 7).
Synchronization inputs
• Standalone TCXO quartz time base.
• DCF(EUROPE).
• France Inter (EUROPE).
• GPS.
• Pulse 24V reversed parallel minute or serial reversed 1/2 minute pulses.
• AFNOR NFS 87500
• IRIG B : shall be specified on Purchase order.
• ASCII RS232, ASCII RS422/485.
• DHW 869.525 Mhz.
• NTP Ethernet 10/100BaseT automatic detection :RJ45.
• NTP POE (Power Over Ethernet).
• SMPTE.
• Wi-Fi(IEEE 802.11B/G standard)
Ref : BDR_UK3-8_LEDI-Calendar-V3.2 -priceless 32 All technical changes, aesthetic, colour can be made without prior notice.
LEDICA® 10.M Indoor / Single face
ITEM CODE
N393 / VERSION � � � � � �
Standalone : TCXO quartz radiosynchronizable time base Accuracy +/- 0.1 sec/24 h (between 0°C and 40°C)
� 2
DCF Radiosynchronization. Antenna + 4m of cable � D
GPS Antenna + 10m of cable � G
24V reversed parallel minute pulses receiver clock � 3
Minute 60V receiver � V
Serial reversed 1/2 minute pulses receiver clock Consumption 1.25V. 60 to 120mA. 39 ohms shunt
� 5
AFNOR NFS 87500* receiver clock � 8
SMPTE-EBU receiver clock � 7
ASCII RS 232 receiver clock � B
ASCII 422/485 receiver clock � Q
DHW 869.525 Mhz Synchronization � L
NTP Ethernet 10/100 base T Synchronization � N
Wi-Fi(IEEE 802.11B/G standard) � W *IRIG.B Version: to be specified as « remark » on your Purchase Order.
CONFIGURABLE LED
Configurable colour : red, yellow, green � 1
Configurable colour : white or blue � 5
MOUNTING
Standard : wall mount** � 1
Flush mount � 3
** Please refer to the brackets technical sheet
COLOUR OF CASE
Standard : anodized aluminium � 7
Black painted aluminium � 0
Specific � -
POWER SUPPLY
Standard : 230VAC/50-60Hz � 0
115VAC/50-60Hz � 1
Power Over Ethernet (POE) � 7
Low voltage power supply : 12 VDC � 2
Low voltage power supply : 24 VDC � 4
Low voltage power supply : 48 VDC � 6
OPTIONS
Stop clock function via WEB interface � F
Timer : touch housing control block (flush and wall mount version) + 4 meters of cable - up/down
� I
Timer case + 15 m of cable � C
Temperature probe(accuracy ± 0.5°C) + 5 m cable : temperature and hour displayed alternately
� T
Time beep output, or contact relays for end of timer � E
ASCII RS232 output(do not associate with Ascii input version) � A
or : ASCII RS422-485 output(do not associate with Ascii input version) � R
Tropicalized � U
Specification � D
Ref : BDR_UK3-8_LEDI-Calendar-V3.2 -priceless All technical changes, aesthetic, colour can be made without prior notice. 33
LEDICA® REVERSO 10.M Indoor / Double face
Professional LED clock with tri-color display, robust and stylish combining the best of the technology for an easy installation and operation.
Time Setting The professional LEDICA ® clocks can display the same time information, synchronized by a master clock or a time server. On standalone and pulse version, the time setting is manual.
Internal time base The LEDICA ® clock has its own temperature compensated TCXO time base which allows an accuracy about 0.1 sec / day between 0° to 40°C in case of synchronization loss.
Security Backup of time information in case of mains absence, by lithium battery : 10 years.
Specification
Power supply 230VAC/50-60Hz 115VAC/50-60Hz Low voltage 12, 24 or 48 VDC NTP POE (Power Over Ethernet)
Certification CE, EN 60950, EN 55022, EN 55024, ROHS.
Maximum consumption
16,42 VA
IP 30
MTBF 46 267h.
MTTR Display : 5 min. CPU : 5 min. Power supply : 5 min.
Weight 3.1 – 3.6 kg
Dimension 770x210x99mm (LxHxD) Mounting bracket : 150 mm
Digit height Hour/minute : 110 mm Date : 50 mm (Alphanumeric display for day and month)
Maximal distance of legibility
60 meters
Shock resistance IK9
Operating temperature
-20° to 50°C
Electrical equipment classification Class 2
Display / LED specifications SMD Technology, Viewing Angle: 160°.
bi-colored LED (red green) monochrome LED
Red : 245 mcd Yellow
Blue : 625 mcd
Green : 780 mcd White : 625 mcd
Key feature Perfectly silent, direct and accurate reading of time. SMD bi-colour LED technology allows to change the display colour in red, green or yellow (optional white or blue). The patented technology of the light guide provides a perfect regularity of the brightness and viewing angle at 160 °. The front face of the LEDICA ® is coated with an antiglare and anti-scratch film giving an extraordinary 60000 : 1 level of contrast. A protection against over-voltage and industrial interference via EMC filter. Pre-programmed calendar available in 11 languages. Anodized aluminium case : Single face IP54 waterproof. Double face IP30 or IP54 waterproof. An easy "plug and play" installation. Its participation in the sustainable development life span over 20 years. 2 years warranty.
Remote management (with NTP synchronization) Remote configuration and time setting via WEB interface. Automatic time zone choice and daylight saving time change. Supervision via HTTP, SNMP, Telnet. “GT Network Manager” (Windows® NT/XP/2000/Vista (32 bits)/ Windows 7).
Synchronization inputs
• Standalone TCXO quartz time base.
• DCF(EUROPE).
• France Inter (EUROPE).
• GPS.
• Pulse 24V reversed parallel minute or serial reversed 1/2 minute pulses.
• AFNOR NFS 87500
• IRIG B : shall be specified on Purchase order.
• ASCII RS232, ASCII RS422/485.
• DHW 869.525 Mhz.
• NTP Ethernet 10/100BaseT automatic detection :RJ45.
• NTP POE (Power Over Ethernet).
• SMPTE.
• Wi-Fi(IEEE 802.11B/G standard)
150
Ref : BDR_UK3-8_LEDI-Calendar-V3.2 -priceless 34 All technical changes, aesthetic, colour can be made without prior notice.
LEDICA® REVERSO 10.M Indoor / Double face
ITEM CODE
ND393 / 2 DISPLAY � � � � � � �
Double face 2
VERSION
Standalone : TCXO quartz radiosynchronizable time base Accuracy +/- 0.1 sec/24 h (between 0°C and 40°C)
� 2
DCF Radiosynchronization. Antenna + 4m of cable � D
GPS Antenna + 10m of cable � G
24V reversed parallel minute pulses receiver clock � 3
Minute 60V receiver � V
Serial reversed 1/2 minute pulses receiver clock Consumption 1.25V. 60 to 120mA. 39 ohms shunt
� 5
AFNOR NFS 87500* receiver clock � 8
SMPTE-EBU receiver clock � 7
ASCII RS 232 receiver clock � B
ASCII 422/485 receiver clock � Q
DHW 869.525 Mhz Synchronization � L
NTP Ethernet 10/100 base T Synchronization � N
Wi-Fi(IEEE 802.11B/G standard) � W
*IRIG.B Version: to be specified as « remark » on your Purchase Order.
CONFIGURABLE LED
Configurable colour : red, yellow, green � 1
Configurable colour : white or blue � 5
MOUNTING
To be associated with requested brackets ** � P
** Please refer to the brackets technical sheet
COLOUR OF CASE
Standard : anodized aluminium � 7
Black painted aluminium � 0
Specific � -
POWER SUPPLY
Standard : 230VAC/50-60Hz � 0
115VAC/50-60Hz � 1
Power Over Ethernet (POE) � 7
Low voltage power supply : 12 VDC � 2
Low voltage power supply : 24 VDC � 4
Low voltage power supply : 48 VDC � 6
OPTIONS
Stop clock function via WEB interface � F
Timer : touch housing control block (flush and wall mount version) + 4 meters of cable - up/down
� I
Timer case + 15 m of cable � C
Temperature probe(accuracy ± 0.5°C) + 5 m cable : temperature and hour displayed alternately
� T
Time beep output, or contact relays for end of timer � E
ASCII RS232 output(do not associate with Ascii input version) � A
or : ASCII RS422-485 output(do not associate with Ascii input version) � R
Tropicalized � U
Specification � S
Ref : BDR_UK3-8_LEDI-Calendar-V3.2 -priceless All technical changes, aesthetic, colour can be made without prior notice. 35
LEDICA® 10.M.S Indoor / Single face
Professional LED clock with tri-color display, robust and stylish combining the best of the technology for an easy installation and operation.
Time Setting The professional LEDICA ® clocks can display the same time information, synchronized by a master clock or a time server. On standalone and pulse version, the time setting is manual.
Internal time base The LEDICA ® clock has its own temperature compensated TCXO time base which allows an accuracy about 0.1 sec / day between 0° to 40°C in case of synchronization loss.
Security Backup of time information in case of mains absence, by lithium battery : 10 years.
Specification
Power supply 230VAC/50-60Hz 115VAC/50-60Hz Low voltage 12, 24 or 48 VDC NTP POE (Power Over Ethernet)
Certification CE, EN 60950, EN 55022, EN 55024, ROHS.
Consommation maximale :
14,99 VA
IP 30
MTBF 46 267 h.
MTTR Display : 5 min. CPU : 5 min. Power supply : 5 min.
Weight 3,6 kg
Dimension 930x210x62 mm (LxHxD)
Digit height Hour/minute : 110 mm Second : 80 mm Date : 50 mm (Alphanumeric display for day and month)
Maximal distance of legibility
60 meters
Shock resistance IK9
Operating temperature
-20° to 50°C
Electrical equipment classification Class 2
Display / LED specifications SMD Technology, Viewing Angle: 160°.
bi-colored LED (red green) monochrome LED
Red : 245 mcd Yellow
Blue : 625 mcd
Green : 780 mcd White : 625 mcd
Key features Perfectly silent, direct and accurate reading of time. SMD bi-colour LED technology allows to change the display colour in red, green or yellow (optional white or blue). The patented technology of the light guide provides a perfect regularity of the brightness and viewing angle at 160 °. The front face of the LEDICA ® is coated with an antiglare and anti-scratch film giving an extraordinary 60000 : 1 level of contrast. Pre-programmed calendar available in 11 languages. An anodized aluminium case wall mount (screw lock) ,flush mount or bracket mount. A protection against over-voltage and industrial interference via EMC filter. An easy "plug and play" installation. Its participation in the sustainable development life span over 20 years. 2 years warranty.
Remote management (with NTP synchronization) Remote configuration and time setting via WEB interface. Automatic time zone choice and daylight saving time change. Supervision via HTTP, SNMP, Telnet. “GT Network Manager” (Windows® NT/XP/2000/Vista (32 bits)/ Windows 7).
Synchronization inputs
• Standalone TCXO quartz time base.
• DCF(EUROPE).
• France Inter (EUROPE).
• GPS.
• Pulse 24V reversed parallel minute or serial reversed 1/2 minute pulses.
• AFNOR NFS 87500
• IRIG B : shall be specified on Purchase order.
• ASCII RS232, ASCII RS422/485.
• DHW 869.525 Mhz.
• NTP Ethernet 10/100BaseT automatic detection :RJ45.
• NTP POE (Power Over Ethernet).
• SMPTE.
• Wi-Fi(IEEE 802.11B/G standard)
Ref : BDR_UK3-8_LEDI-Calendar-V3.2 -priceless 36 All technical changes, aesthetic, colour can be made without prior notice.
LEDICA® 10.M.S Indoor / Single face
ITEM CODE
N394 / VERSION � � � � � �
Standalone : TCXO quartz radiosynchronizable time base Accuracy +/- 0.1 sec/24 h (between 0°C and 40°C)
� 2
DCF Radiosynchronization. Antenna + 4m of cable � D
GPS Antenna + 10m of cable � G
24V reversed parallel minute pulses receiver clock � 3
Minute 60V receiver � V
Serial reversed 1/2 minute pulses receiver clock Consumption 1.25V. 60 to 120mA. 39 ohms shunt
� 5
AFNOR NFS 87500* receiver clock � 8
SMPTE-EBU receiver clock � 7
ASCII RS 232 receiver clock � B
ASCII 422/485 receiver clock � Q
DHW 869.525 Mhz Synchronization � L
NTP Ethernet 10/100 base T Synchronization � N
Wi-Fi(IEEE 802.11B/G standard) � W *IRIG.B Version: to be specified as « remark » on your Purchase Order.
CONFIGURABLE LED
Configurable colour : red, yellow, green � 1
Configurable colour : white or blue � 5
MOUNTING
Standard : wall mount** � 1
Flush mount � 3
** Please refer to the brackets technical sheet
COLOUR OF CASE
Standard : anodized aluminium � 7
Black painted aluminium � 0
Specific � -
POWER SUPPLY
Standard : 230VAC/50-60Hz � 0
115VAC/50-60Hz � 1
Power Over Ethernet (POE) � 7
Low voltage power supply : 12 VDC � 2
Low voltage power supply : 24 VDC � 4
Low voltage power supply : 48 VDC � 6
OPTIONS
Stop clock function via WEB interface � F
Timer : touch housing control block (flush and wall mount version) + 4 meters of cable - up/down
� I
Timer case + 15 m of cable � C
Temperature probe(accuracy ± 0.5°C) + 5 m cable : temperature and hour displayed alternately
� T
Time beep output, or contact relays for end of timer � E
ASCII RS232 output(do not associate with Ascii input version) � A
or : ASCII RS422-485 output(do not associate with Ascii input version) � R
Tropicalized � U
Specification � D
Ref : BDR_UK3-8_LEDI-Calendar-V3.2 -priceless All technical changes, aesthetic, colour can be made without prior notice. 37
LEDICA® REVERSO 10.M.S Indoor / Double face
Professional LED clock with tri-color display, robust and stylish combining the best of the technology for an easy installation and operation.
Time Setting The professional LEDICA ® clocks can display the same time information, synchronized by a master clock or a time server. On standalone and pulse version, the time setting is manual.
Internal time base The LEDICA ® clock has its own temperature compensated TCXO time base which allows an accuracy about 0.1 sec / day between 0° to 40°C in case of synchronization loss.
Security Backup of time information in case of mains absence, by lithium battery : 10 years.
Specification
Power supply 230VAC/50-60Hz 115VAC/50-60Hz Low voltage 12, 24 or 48 VDC NTP POE (Power Over Ethernet)
Certification CE, EN 60950, EN 55022, EN 55024, ROHS.
Maximum consumption
17,99 VA
IP 30
MTBF 46 267 h.
MTTR Display : 5 min. CPU : 5 min. Power supply : 5 min.
Weight 3.6 - 4 kg
Dimension 930x210x99 mm (LxHxD) Mounting bracket : 150 mm
Digit height Hour/ minute : 110 mm Second : 80 mm Date : 50 mm (Alphanumeric display for day and month)
Maximal distance of legibility
60 meters
Shock resistance IK9
Operating temperature
-20° to 50°C
Electrical equipment classification Class 2
Display / LED specifications SMD Technology, Viewing Angle: 160°.
bi-colored LED (red green) monochrome LED
Red : 245 mcd Yellow
Blue : 625 mcd
Green : 780 mcd White : 625 mcd
Key features Perfectly silent, direct and accurate reading of time. SMD bi-colour LED technology allows to change the display colour in red, green or yellow (optional white or blue). The patented technology of the light guide provides a perfect regularity of the brightness and viewing angle at 160 °. The front face of the LEDICA ® is coated with an antiglare and anti-scratch film giving an extraordinary 60000 : 1 level of contrast. A protection against over-voltage and industrial interference via EMC filter. Pre-programmed calendar available in 11 languages. Anodized aluminium case : Single face IP54 waterproof. Double face IP30 or IP54 waterproof. An easy "plug and play" installation. Its participation in the sustainable development life span over 20 years. 2 years warranty.
Remote management (with NTP synchronization) Remote configuration and time setting via WEB interface. Automatic time zone choice and daylight saving time change. Supervision via HTTP, SNMP, Telnet. “GT Network Manager” (Windows® NT/XP/2000/Vista (32 bits)/ Windows 7).
Synchronization inputs
• Standalone TCXO quartz time base.
• DCF(EUROPE).
• France Inter (EUROPE).
• GPS.
• Pulse 24V reversed parallel minute or serial reversed 1/2 minute pulses.
• AFNOR NFS 87500
• IRIG B : shall be specified on Purchase order.
• ASCII RS232, ASCII RS422/485.
• DHW 869.525 Mhz.
• NTP Ethernet 10/100BaseT automatic detection :RJ45.
• NTP POE (Power Over Ethernet).
• SMPTE.
• Wi-Fi(IEEE 802.11B/G standard)
150
Ref : BDR_UK3-8_LEDI-Calendar-V3.2 -priceless 38 All technical changes, aesthetic, colour can be made without prior notice.
LEDICA® REVERSO 10.M.S Indoor / Double face
ITEM CODE
ND394 / 2 DISPLAY � � � � � � �
Double face 2
VERSION
Standalone : TCXO quartz radiosynchronizable time base Accuracy +/- 0.1 sec/24 h (between 0°C and 40°C)
� 2
DCF Radiosynchronization. Antenna + 4m of cable � D
GPS Antenna + 10m of cable � G
24V reversed parallel minute pulses receiver clock � 3
Minute 60V receiver � V
Serial reversed 1/2 minute pulses receiver clock Consumption 1.25V. 60 to 120mA. 39 ohms shunt
� 5
AFNOR NFS 87500* receiver clock � 8
SMPTE-EBU receiver clock � 7
ASCII RS 232 receiver clock � B
ASCII 422/485 receiver clock � Q
DHW 869.525 Mhz Synchronization � L
NTP Ethernet 10/100 base T Synchronization � N
Wi-Fi(IEEE 802.11B/G standard) � W
*IRIG.B Version: to be specified as « remark » on your Purchase Order.
CONFIGURABLE LED
Configurable colour : red, yellow, green � 1
Configurable colour : white or blue � 5
MOUNTING
To be associated with requested brackets ** � P
** Please refer to the brackets technical sheet
COLOUR OF CASE
Standard : anodized aluminium � 7
Black painted aluminium � 0
Specific � -
POWER SUPPLY
Standard : 230VAC/50-60Hz � 0
115VAC/50-60Hz � 1
Power Over Ethernet (POE) � 7
Low voltage power supply : 12 VDC � 2
Low voltage power supply : 24 VDC � 4
Low voltage power supply : 48 VDC � 6
OPTIONS
Stop clock function via WEB interface � F
Timer : touch housing control block (flush and wall mount version) + 4 meters of cable - up/down
� I
Timer case + 15 m of cable � C
Temperature probe(accuracy ± 0.5°C) + 5 m cable : temperature and hour displayed alternately
� T
Time beep output, or contact relays for end of timer � E
ASCII RS232 output(do not associate with Ascii input version) � A
or : ASCII RS422-485 output(do not associate with Ascii input version) � R
Tropicalized � U
Specification � S
Ref : BDR_UK3-8_LEDI-Calendar-V3.2 -priceless All technical changes, aesthetic, colour can be made without prior notice. 39
MOUNTING BRACKETS FOR "LEDI & LEDICA" RANGE
� Brackets for Indoor Clocks single / double face
Item Code of
LEDI LEDICA Indoor (ex : N343 ou ND 343)
Length (offset)*
color* Standard:
Grey
Ceiling Bracket Single Face � PP xxxx 0095 7
Ceiling Bracket double face � PP xxxx 0150 7
Side Bracket for double face only
� PD xxxx 0160 7
� � � �
Item Code
*Other lengths or colors on request
Recommended