View
5
Download
0
Category
Preview:
Citation preview
Ripple Air mattress system (medium andhigh level)
Advanced anti bedsore and pressure alternating airmattress systemComplete mattress replacement systemHelps with the prevention, management and treatmentof bedsoresAlternating mode distributes pressure to mimic sleepingpatternsIncludes a multi-phase silent pump with constantpressure adjustmentDifferent therapy and cycle mode settings includedIdeal for nursing use whilst attending to care procedureswith a patientMattress supports patient weight of up to 210 kgMattress dimensions: 86 mm (W) x 2000 mm (L) x 200mm (H)Suitable for patients for low to high risk of bedsores1-year guarantee
Read More
SKU: AM 1004
Categories: Mattress, Beds & Mattresses
Ripple Air mattress system (mediumlevel)
An anti bedsore and pressure alternating air mattresssystem with modesHelps with the prevention, management and treatmentof bedsoresIncludes a two-phase silent pump systemIncludes different inflation/deflation cycles and therapymode settingsIdeal for nursing use whilst attending to care procedureswith a patientMattress dimensions: 86 mm (W) x 2000 mm (L) x 120mm (H)Mattress supports patient weight of up to 180 kgSuitable for patients for low to medium risk of bedsores1 year guarantee
Read More
SKU: AM 1003
Categories: Mattress, Beds & Mattresses
Ripple Air mattress system (entry level)
Air pressure mattress overlay system, including medicalcoverEntry-level anti bedsore and pressure alternating airmattress systemHelps with the prevention, management and treatmentof bedsoresIncludes a two-phase silent pump systemMattress supports patient weight of up to 140 kgMattress dimensions: 86 mm (W) x 2000 mm (L) x100mm (H)Suitable for patients for low to medium risk of bedsores1-year guarantee
Read More
SKU: AM 1002
Categories: Mattress, Beds & Mattresses
Bubble air mattress system
Air pressure mattress overlay systemPressure relief and bedsore preventionIncludes a two-phase silent pump systemPVC cover, and bubbles on top and bottom of mattressMattress dimensions: 70 mm (H) x 1300 mm (L)Suitable for patients for low to medium risk of bedsores
Read More
SKU: AM 1001
Categories: Mattress, Beds & Mattresses
Hyperfoam Anti Bedsore Heavy DutyFoam Mattress
Three-layer hyper-elastic pressure relief foamEasy removable PU medical coverVirus and bacteria protectionExceptional ventilation system for the idealLongitudinal and diagonal separate intersectionsMattress cover is waterproof, breathable andIncludes a superzone for head and heel reliefAdditional stability on the mattress edgesDimensions: (W) 90 x (L) 200 x (H) 18 cmUser weight 40 to 250 kgCover washable up to 95°5-year guarantee
Read More
SKU: CM 1010
Categories: Mattress, Beds & Mattresses
Hyperfoam Anti Bedsore Foam Mattress(3 layer)
Three-layer hyper-elastic pressure relief foamEasy removable PU medical coverVirus and bacteria protectionExceptional ventilation system for the idealLongitudinal and diagonal separate intersectionsMattress cover is waterproof, breathable andIncludes a superzone for head and heel reliefAdditional stability on the mattress edgesDimensions: (W) 90 x (L) 200 x (H) 15 cmUser weight 20 to 150 kgCover washable up to 95°5-year guarantee
Read More
SKU: CM 1009
Categories: Mattress, Beds & Mattresses
Hyperfoam Anti Bedsore Foam Mattress(2 layer)
Easy removable waterproof medical coverVirus and bacteria protectionLongitudinal and diagonal separate intersectionsExceptional ventilation system for the idealDimensions: (W) 90 x (L) 200 x (H) 14 cmUser weight 20 to 140 kgCover washable up to 95°2-year guarantee
Read More
SKU: CM 1007
Categories: Mattress, Beds & Mattresses
Hyperfoam Anti Bedsore Foam Mattress(1 layer)
Easy removable waterproof medical coverVirus and bacteria protectionExceptional ventilation system for the idealDimensions: (W) 90 x (L) 200 x (H) 14 cmUser weight 20 to 110 kgCover washable up to 90°1-year guarantee
Read More
SKU: CM 1006
Categories: Mattress
2 Layer Comfort spring mattress
Two-layer mattress, sponge and spring materialDimensions: (W) 90 x (L) 200 x (H) 15 cmFirst layer: 5 cm sponge liningSecond layer: Spring mattress layer with pvc frameUser weight 20 to 250 kgFibre cloth cover included1-year guarantee
Mattress fits the Double Electrical Care BedRead More
SKU: CM 1019
Categories: Mattress, Homecare
3 Layer sponge and memory foamMattress
Three-layer sponge and memory foam mattressDimensions: (W) 90 x (L) 200 x (H) 15 cmFirst layer: 3 cm density 40D rebound memory foamSecond layer: 2 cm density 36D sponge support layerThird layer: 10 cm density 27D thick sponge layerUser weight 20 to 250 kg
1-year guaranteeFibre cloth cover included
Mattress fits the Double Electrical Care BedRead More
SKU: CB 1018
Categories: Homecare, Mattress
Patient Lifting Pole - Wall Mounted
Adjustable Chain and HandleMild Steel Epoxy Powder Coated Finish
Read More
SKU: BD200W
Categories: Patient Lifting Poles
Patient Lifting Pole
Mounted on 2x 75mm Swivel Castors and 2x 75mmLocking CastorsAdjustable Chain and HandleMade from Mild SteelEpoxy Powder Coated Round TubingIdeal for Easy Moving to Other Beds
Read More
SKU: BD200M
Categories: Patient Lifting Poles
Patient Lifting Pole - Drop-In
Drop-In Fits Hi-Lo Bed and New Type Ward BedAdjustable Chain and Handle includedMade from Mild Steel Epoxy Powder Coated RoundTubing
Read More
SKU: BD200
Categories: Patient Lifting Poles
Transfer Board
Wood Used to Transfer Patient from bed to Wheelchair andfrom Wheelchair to BedRead More
SKU: TT872
Categories: Spinal Boards & Stretchers
Transfer Board
Wood Used to Transfer Patients from the Stretcher to the Bedand from the Bed to the StretcherRead More
SKU: TT874
Categories: Spinal Boards & Stretchers
Stretcher
Aluminium Hinges for Folding 2x Aluminium Poles with DipCoated HandlesRead More
SKU: TT868
Categories: Spinal Boards & Stretchers
Scoop Stretcher
Ends of the Stretcher, a Ginged Separate and JoinedArrangement is set to the Middle, which can separatethe Stretcher into 2 Parts (Left and Right)Dimensions: Max. Unfolded Size: 2020 x 420 x 60mmMin.Unfolded Size: 1680 x 420 x 60mmSelf Weight: 10kgLoad Bearing: 159kg
Read More
SKU: TT855
Categories: Spinal Boards & Stretchers
Ambulance Stretcher
Double Fold Aluminium Feet with Hinges on Both Endsas well as in the MiddleStertcher can Fold in Length and in Middle for EasyStorage
Read More
SKU: TT869
Categories: Spinal Boards & Stretchers
Ambulance Stretcher
2x Aluminium Poles Mat and Dip Coated HandlesRead More
SKU: TT867
Categories: Spinal Boards & Stretchers
Patient Lifting Handle
Chain and Handle OnlyRead More
SKU: BD201
Categories: Patient Lifting Poles, Accessories
Leg Cradle, Folding
Made From Mild Steel Round and Square TubingEpoxy Powder Coated FinishUsed in Bed to Lift Blankets from Legs in Case of InjuryApproximate Deimensions: Open Position: 500 x 500 x300mm
Read More
SKU: BD240F
Categories: Accessories
Leg Cradle
Made from Mild Steel Round BarEpoxy Powder Coated FinishUsed in Bed to Lift Blankets from Legs in Case of Injury
Read More
SKU: BD240
Categories: Accessories
Bed Tray
Mild Steel Epoxy Powder Coated Sheeting TopHas Open Front and Three-Sided BarrierIdeal to use for Eating in Bed
Read More
SKU: BD210
Categories: Accessories
Bed Tray - Foldable Legs
Formica Formed TopFoldable Legs for Easy Storage and Light WeightIdeal to use for Eating in Bed
Read More
SKU: BD211
Categories: Accessories
Backrest
Folding and AdjustableMade from Mild Steel Round Tubing with Welded MeshBaseEpoxy Powder Coated FinishUsed in bed to Support Patient in Upright position inDifferent Angles
Read More
SKU: BD260
Categories: Accessories
Spinal Board - Full-Length Wood
Full-Length WoodRead More
SKU: SP002
Categories: Spinal Boards & Stretchers
Spinal Board - Half Length Wood
Half Length WoodRead More
SKU: SP001
Categories: Spinal Boards & Stretchers
Multipurpose Orthopaedic Frame
12 PulleysRead More
SKU: BD033
Categories: Orthopaedic, Traction Frames
Extension Operator
Complete with ClampSolid Adjustable ArmNylon Pulley at one EndClamp in options to fit 50 x 25 Rectangular Tube or 25 x25 Square Tube Chrome Finish
Read More
SKU: BD140
Categories: Traction Frames
Chartboard, Metal
Clip with Sheet Metal Hook to Hang on Bed Attached toBoardMild Steel Epoxy Powder Coated Finish
Read More
SKU: BD510
Categories: Chart Board
Chart Board and X-Ray Holder
2 Section Bed HangingMade From Mild Steel Sheeting with 2 Round Bar Hooksin PVC for Bed HangingMade From Mild Steel Epoxy Powder Coated Finish
Read More
SKU: BD512
Categories: Chart Board, X-Ray Holder
Single Step
1X Steps25mm Round TubingSurface and Frame Options Available
Read More
SKU: BD802
Categories: Steps
Double Step
2X Steps25mm Round TubingSurface and Frame Options Available
Read More
SKU: BD806
Categories: Steps
Traction Weight
Casted Designed with Solid, Middle Hole, Top Domeand Bottom Recessed Dome for Safe Stacking Purposeon Weight HangerMild Steel Epoxy Powder Coated Finish
Read More
SKU: BD152
Categories: Traction Frames
T-Hook
Used for DripstandRead More
SKU: ST672
Categories: Bed Sides & Parts, Drip Stand
Pulley (for Balkan Frame) - Single
SingleRead More
SKU: BD031
Categories: Traction Frames
Pulley (for Balkan Frame)
DoubleRead More
SKU: BD032
Categories: Traction Frames
Hanger for Weights
Plated Hanger OnlyRead More
SKU: BD142
Categories: Traction Frames
Bedside Clamp
Aluminium Slide Spring Loaded Pin and Bush G-BracketSetscrewRead More
SKU: BD094A
Categories: Bed Sides & Parts
Bed Elevator
Folding Frame made from Mild Steel Epoxy Powder CoatedFinishRead More
SKU: BD130
Categories: Accessories, Bed Sides & Parts
Bed Blocks
1x Pair for Lifting Beds Two SettingsMade from Cold Rolled Mild Steel SheetingRubber Edging to Prevent Blocks from Sliding and FloorScratchingEpoxy Powder Coated Finish
Read More
SKU: BD144
Categories: Accessories, Bed Sides & Parts
Balkan Frame
6x PulleysRead More
SKU: BD030
Categories: Traction Frames
Aluminium Slide
Slide OnlyRead More
SKU: BD096
Categories: Bed Sides & Parts
Bedside Stool
Top Section Made from Wood with Slot in Middle to beused as a HandleMade From Mild Steel Epoxy Powder Coated RoundTubingMounted on 4x Non-Marking Rubber Tips to PreventSlipping on Floor
Approximate Dimensions Medium Size: 610(l) x 305(w)Large Size: 910(l) x 305(w)
Read More
SKU: BD791
Categories: Bedside Stools & Chairs
Fold Down Safety Sides
Fits on Mattress Base FrameFold-Down (Easy Up and Down Folding)Lightweight with a Modern LookApproximate Dimensions: 1480(l) x 420(h)mm
Read More
SKU: BD100
Categories: Bed Sides & Parts, Safety Sides
Drop-Side Cot Sides
Mild Steel Tubing with Chrome FinishComplete with Aluminium Slide Fitted with SpringLoaded Pin for Locking and ReleasingBracket for Bed Clamping included
Read More
SKU: BD093
Categories: Bed Sides & Parts, Safety Sides
Eggshell Mattress
SingleRead More
SKU: MFEGG
Categories: Mattress
Water Proof Mattress
Approximate Dimensions: 630 x 350 x 50mmRead More
SKU: BD194
Categories: Bassinets & Cribs, Mattress
Cordoba Covered Mattress
2 Section Build-In Eggshell CordobaCover Zip
Read More
SKU: MFC150
Categories: Mattress
Angle Poise Lamp - Wall Mounted /Clamp to Table
Wall Mounted / Clamp to Table WhiteRead More
SKU: AP003
Categories: Accessories, Lamps
Angle Poise Lamp
Mounted on 4x 50mm Swivel CastorsRead More
SKU: AP002
Categories: Accessories, Lamps
CPR Board
Made from woodRead More
SKU: TT871
Categories: Spinal Boards & Stretchers
Recommended