View
12
Download
0
Category
Preview:
Citation preview
I n n o v at I v e e n d - o f - l I n e S o l U t I o n S
Pack-P
alle
tize C
om
bo
Ro
bo
tic Case P
acker-Palletizer S
olutio
n
An Approved
Up to 15 CPM
Fast ROI
Flexible
Multiple Line Infeed
Side or End Load RSC, Tray, Wraparound or Display Cases
Robotic Case Packer-PalletizerThe Case Packer-Palletizer (Pack-Pal)offers the ability to case pack and palletize in one location utilizing a robotic arm.
High CPM rates of up to 15 cases per minute can be achieved depending on product and pack pattern requirements.
Small footprint takes less space than two or more separate machines.
Rapid changeover with the flexibility of a robot.
Lower cost of ownership than separate machines.
Combine multiple lines in one machine.
Versatile machine configurations accommodate your line, floor space, facility and ergonomic requirements.
Typical Equipment Dimensions
Operation Summary:
The Schneider Packer-Palletizing Cell is ideal for combining case packing and palletizing in one location. Cases are automatically erected, then loaded with product, coded and palletized; all utilizing one robotic arm.
Shown below is the manual pallet station. Product is delivered to the case packer infeed, collated and automatically loaded by the robot into the case. The case packer folds the top and bottom flaps and tightly seals the case. Fully loaded and sealed cases are presented to the robot. The robot will pick the cases from the infeed and place it onto the appropriate pallet in the appropriate pallet pattern. Once a unit load is completed, it is discharged.
P.o. Box 890 | 5370 Guy Young Rd. 315.676.3035 ph info@schneiderequip.comBrewerton, nY 13029 315.676.2875 fax www.schneiderequip.com
Packer-P
alletizer / 1008/004
Typical Product Flow
Horizontal /Vertical Robotic Robotic Multi-Line Wrapping Bundling AncillaryCase Packers Case Packers Palletizers Systems Equipment Equipment Equipment
SPECIFICATIONS
OTHER SCHNEIDER END-OF-LINE SOLUTIONS
Controller: PlC microprocessor
End Of Arm Tooling (EOAT) Options: Include vacuum, mechanical, fork, or a combination of these with or without slip sheet handling
Construction: Standard: Painted, carbon steel
Case Type:Standard: RSC regular slotted cases Optional: HSC, tray and display cases
Sealing:Standard: low temperature hot melt glue Optional: 2” wide tape heads
Visual Display HMI:Standard: one color touchscreen
Control Voltage: 24 vdC
Power Requirements: 480 volt, 3 phase
Pneumatic Requirements: 25 CfM @ 70 PSI clean dry air
Safety: Meets anSI/PMMI B155.1 safety standards
Pack-P
alle
tize C
om
bo
Ro
bo
tic Case P
acker-Palletizer S
olutio
n
• Case labeling• Pallet labeling• Manual or automatic pallet
exchange
Options
• Over/Under conveyor• Pallet dispenser• Pallet transport conveyor
DISTRIBUTED & SUPPORTED by:
Telephone: 800-338-7837Visit Our Website: www.inopakinc.com Email us: sales@inopakinc.com
Recommended