RSoft v 2013_12 Component Tool Installation

1. Run RSoft Component tool Setup file. Choose 32 or 64 bit version file as per your OS.

2. Click ‘Next’

3. Select ‘I Accept...’ and click ‘Next’

4. Following window will open, enter User Name & Organization detail.

5. Click ‘Next’, in following screen you can chose location for installation.

6. Select folder & Click ‘Next’

NODELOCKED INSTALLATION

7. Select License Type ‘Nodelocked’, click ‘Next’

8. Following Window will open, select location of ‘*.txt’ license file received by you. Click ‘Open’ in Browse window.

9. After license file location is selected, Window will look like as below, click

‘Next’

10. Next window will open, for selecting Synopsys Common License (SCL) setup file, select location of ‘SCL_V11.7_windows.exe’ file, click ‘Open’ in Browser window. ( If SCL is already installed on PC earlier, then this screen will not appear, instead screen 12 will appear)

11. After selecting location of SCL setup file, click ‘Next’

12. Following window will open, click ‘Install ‘

13. Installation will start.

14. Following screen will appear after installation, click ‘OK’. If you are installing on Client Machine, Screen 23 will appear. Otherwise go to next screen.

15. Now, SCL installation screen will appear. ( If SCL is already installed on PC earlier, then this screen will not appear). Click ‘Next’

16. SCL installation screen appears, click ‘Next’.

17. Enter information in following window, if you do not have site no. leave it blank. Click ‘Next’

18. Accept License Agreement , click ‘Next’

19. Select Destination folder, Click ‘Next’

20. Click ‘Accept, Next’

21. After SCL installation, window will appear as follow, Click ‘Finish’

22. Following window will appear, attach USB Dongle provided with RSoft tool.

Read instructions & Click ‘Next’

23. RSoft tool installation completes , click ‘Finish’

24. For Network Server installation (machine on which USB Dongle is attached for network license), choose ‘Network (Server Installation)’ Click ‘Next ‘ , then Screen 8 will appear, follow sequence after that.

25. For Network Client ( machines on which no USB Dongle is required for Network License), choose ‘Network (Client Installation)’, click ‘Next’

26. Enter Name or IP address of Network Key Server ( where USB Dongle is

attached)

27. After Server IP / Name is entered, click ‘Next’

28. For Network Client installation, no license file is required, no SCL installation required. After Screen 27, following screen will appear. Click ‘Install’

29. After installation on Network Client, following window will appear, Click ‘OK’

30. Next, following window will appear. Click ‘OK’

31.Rsoft Network Client Installation is complete.