View
5
Download
0
Category
Preview:
Citation preview
Increased benefits, lower costs.Linde RX60 Series.
RX60-25C & 30C, RX60-25L, 30L & 35, and RX60-40, 45, 50, 50/600
Capacity 5,000 to 11,000 lb.
With Linde you get ...
RX60-25C and RX60-30C
RX60-25L, RX60-30L, and RX60-35
Power and strength inside and out. The customer driven design of Linde’s high performance electric trucks make them versatile and effective even in uncommon applications.
The RX60 series electric trucks have been designed by constantly analyzing customer applications and by adapting to changing design requirements, needs, and requests. Linde will make every effort to develop and apply technology by designing and manufacturing safer, more productive, and more durable forklifts.
Innovation is the foundation of our success.
Over 400 employees in our research and development group assure continuous product improvement and development of new technologies.
RX60-40, RX60-45, RX60-50, and RX60-50/600
Safety 3 Side battery discharge
3 Optimized visibility mast
3 Ramp start assist
3 Programmable performance
3 Available interlocks (optional)
3 “Quick set” parking brake
3 Armrest mounted horn button (optional)
Versatile & Energy Efficient3 Indoor/outdoor operation
3 Full operator cab (optional)
3 Electric heating system (optional)
3 Cold environment operation to -22 F (optional)
3 Energy return system
3 Heat management design
3 Automatic performance adaptation - save
energy with "Blue Zone"
Lowest Maintenance & Operating Cost 3 1000 hour periodic maintenance intervals
3 Easy component access
3 Adjustable automatic deceleration
3 Dual, independent CAN-bus diagnostic systems
3 Long-life multi-disc brakes
RX60-40 shown
Unmatched Performance3 High residual capacity
3 Fast acceleration
3 12 mph travel speed (laden and empty)
3 Automatic power boost function
3 Fully programmable hydraulic functions
3 100 fpm lift speed
Ergonomic Excellence3 Adjustable steering column
3 Low noise level (68 dba)
3 High comfort, full suspension seat
3 Floating operator compartment
3 Ergonomically designed floor board
3 Armrest with hydraulic mini levers
3 Display of critical information
Durability By Design3 Cast ductile iron steering axle with shock
mounting
3 Electronic components protected inside
counterweight
3 Three phase AC travel and hydraulics
3 Thermo-sensor — motor protection
3 On-board diagnostics
Advantage 80 Volts3 Comparable performance to LP and diesel
powered forklifts
3 Large battery compartments, fitting standard
and vented batteries
3 80 volts efficiency, prerequisite for fast charge
systems (optional)
Seven good reasons for choosing Linde material handling equipment:
3Unmatched Performance
3Ergonomic excellence
3Durability by design
3 Advantage 80 volts
3Safety
3Versatility
3 Low maintenance
... more than what you see.
Mast: Optimized Visibility
Floating Operator Compartment
AC Technology
Cast Steering AxleSide Battery Discharge
The Linde RX60 series is ideal for every manufacturing, storage and distribution, and forwarding business where there is a need for high
performance trucks without emissions.
With annual sales exceeding 100,000 forklift trucks, Linde ranks among the world's leading manufacturers. This position has been justly
earned. Linde trucks excel not only with their recognized innovative technology but especially due to their low energy and operating
costs.
High quality in production is matched by the standard of the services we provide. With our ten manufacturing plants and a comprehensive
network of local partners, we are at your call around the clock and around the world.
Your local Linde dealer offers a complete single-source package including qualified pre-sales consulting, after-sales service and flexible
finance options—whether leasing, renting or purchasing.
Linde Material Handling North America Corporation2450 West 5th North Street, Summerville, SC 29483Phone: 843.875.8000 . Truck Sales Fax: 843.875.8471E-mail: trucksales@lmh-na.com . www.lmh-na.com
linde
_bro
chur
e_rx
60_1
012
USA
_v12
.1
Recommended