View
6
Download
0
Category
Preview:
Citation preview
Fluid Sealing Product Line
Mechanical Seals
● Complete line of Cartridge & Assembly styles ● Off the shelf repair kits for all Robco seals ● Repair facility for all major seal brands ● Failure analysis & reverse engineering capability
Mixer / Agitator / Reactor / Beadmill Seals
● All makes & models repaired ● Upgrade materials of construction to increase MTBF ● Failure analysis & reverse engineering capability
NEW CANEY, TX
PH. 1 800 662 0585
FAX. 281 689 0598
GREENWICH, CT
PH. 203 661 3284
FAX. 203 661 2307
WWW.ROBCOAMERICA.COM
Sales@robcoamerica.com
Industrial Compressor Seals
● We repair all makes & models including: Mycom / Howden / Frick / FES GEA
Mechanical Packing
● Enviropak non asbestos Pump & Valve packings ● Live Load & Die Formed Rings ● Carbon / Bronze / Teflon Bushings
Gaskets
● Enviropak non asbestos pre-cut or full sheets ● Diaphragm, Vegetable Fiber & Rubber Sheet ● Jointex expanded 100% Pure Virgin PTFE ● Spiral Wound ● Graphite Sheet
Heat Resistant Textiles
● Thermofab non asbestos textiles ● Available in Cloth, Rope, Tape & Sleeving (Manhole & Handhole)
FACTORY DIRECT
Save Time Save Money
CHANGE
Robco custom designed / manufactured seals.
1.875” ROBCO EV17 CARTRIDGE SEAL BEING
INSTALLED AT AIRPORT FUEL DEPOT.
ROBCO EV17 CARTRIDGE SEALS CUSTOM
DESIGNED FOR SUBSEA MOTORS AT 3000M
2.50” LIGHTNIN AGITATOR SEAL UPGRADED
TO TUNGSTEN SEAL FACES FROM CARBON.
3.75” ROBCO SINGLE SPRING CARTRIDGE
SEALS FOR SEWAGE PLANT – TRINIDAD.
2.25” ROBCO SEAL INSTALLED ON SUBSEA
MOTOR – OPERATING DEPTH 3000 METERS.
4.00” ROBCO EV17 MIXER SEAL INSTALLED
ON 12,000 GALLON HIGH PRESSURE TANK.
Recommended