View
1
Download
0
Category
Preview:
Citation preview
MADE IN ITALY MADE IN ITALY
W W W . A L L M A T I C . C O M
Made in Italy
ITALIAN DESIGN
SERIE EUROTEC EUROTEC SERIES
Motore per tende e tapparelle con centralina incorporata e finecorsa elettrici. Motor for shutters and sunshades with on board control unit and electrical limit switches.
SISTEMA WIRELESS WIRELESS SYSTEM
Motore con centralina e ricevitore radio rolling code integrato. Motor with control unit and integrated rolling code radio receiver.
Regolazione manuale dei finecorsa elettrici.
Manual regulation of the electrical limit switches.
Compatibile con i trasmettitori della serie B.RO e CLARUS. Compatible with the series B.RO and CLARUS transmitter.
Motore adatto per tende da sole e tapparelle. Motor suitable for shutters and sunshades.
Apertura e chiusura automatica grazie al sensore luce e vento wireless. Automatic opening and closing thanks to the wireless light and wind sensor.
Caratteristiche EUROTEC EUROTEC features
Frutto / Bulb Codice / Code Bianco / White B.RO WALL BB 12005117 Antracite /Anthracite B.RO WALL AA 12005119 Placca / Mask Bianco / White PLACCA WALL BB 12005121 Antracite /Anthracite PLACCA WALL AA 12005123
WINDUO RADIO Cod.12001714
Trasmettitore da parete della serie B.RO per tende e tapparelle disponibile in due colori. Applicabile a muro. Alimentazione: 2 batterie al litio CR2016.
On wall transmitter of BIROL series for shutters and sunshades available in two colours. To be installed on the wall. Power supply: 2 lithium batteries CR2016.
Modello Model
Ø motore Ø motor
Lunghezza Lenght
Carico Charge
Coppia Torque
Potenza Power
Tensione Tension
Codice Code
EUROTEC 20 45 mm 500 mm 40Kg - Ø60mm 20 Nm 170 W 230V - 50Hz 12009000
EUROTEC 30 45 mm 570 mm 50Kg - Ø60mm 30 Nm 180 W 230V - 50Hz 12009030
EUROTEC 50 45 mm 620 mm 100Kg - Ø60mm 50 Nm 220 W 230V - 50Hz 12009050
MADE IN ITALY
9
SERIE EUROTEC EUROTEC SERIES
Motore per tende e tapparelle con centralina incorporata e finecorsa elettrici. Motor for shutters and sunshades with on board control unit and electrical limit switches.
SISTEMA WIRELESS WIRELESS SYSTEM
Motore con centralina e ricevitore radio rolling code integrato. Motor with control unit and integrated rolling code radio receiver.
Regolazione manuale dei finecorsa elettrici.
Manual regulation of the electrical limit switches.
Compatibile con i trasmettitori della serie B.RO e CLARUS. Compatible with the series B.RO and CLARUS transmitter.
Motore adatto per tende da sole e tapparelle. Motor suitable for shutters and sunshades.
Apertura e chiusura automatica grazie al sensore luce e vento wireless. Automatic opening and closing thanks to the wireless light and wind sensor.
Caratteristiche EUROTEC EUROTEC features
Frutto / Bulb Codice / Code Bianco / White B.RO WALL BB 12005117 Antracite /Anthracite B.RO WALL AA 12005119 Placca / Mask Bianco / White PLACCA WALL BB 12005121 Antracite /Anthracite PLACCA WALL AA 12005123
WINDUO RADIO Cod.12001714
Trasmettitore da parete della serie B.RO per tende e tapparelle disponibile in due colori. Applicabile a muro. Alimentazione: 2 batterie al litio CR2016.
On wall transmitter of BIROL series for shutters and sunshades available in two colours. To be installed on the wall. Power supply: 2 lithium batteries CR2016.
Modello Model
Ø motore Ø motor
Lunghezza Lenght
Carico Charge
Coppia Torque
Potenza Power
Tensione Tension
Codice Code
EUROTEC 20 45 mm 500 mm 40Kg - Ø60mm 20 Nm 170 W 230V - 50Hz 12009000
EUROTEC 30 45 mm 570 mm 50Kg - Ø60mm 30 Nm 180 W 230V - 50Hz 12009030
EUROTEC 50 45 mm 620 mm 100Kg - Ø60mm 50 Nm 220 W 230V - 50Hz 12009050
MADE IN ITALY
W W W . A L L M A T I C . C O M
Made in Italy
ITALIAN DESIGN
ET7815 Cod.64100452
ET7015 Cod.64100451
ET5052 Cod. 64100454
ET6025 Cod. 64100455
ET7025 Cod.64100456
ET6015 Cod. 64100457
Coppia di adattatori per tubo ottagonale Ø70mm.
Couple of adapters for Ø70mm octagonal tube.
SERIE EUROTEC / EUROPLUS - Adattatori EUROTEC / EUROPLUS SERIES - Adapters
SERIE EUROTEC / EUROPLUS - Supporti EURODRIVE / EUROPLUS SERIES - Supports
Supporto da cassonetto ad aggancio diretto per EUROTEC e EUROPLUS. Omologato fino a 30Nm
Support for shutter box with direct hook up for EUROTEC and EUROPLUS Homologated until 30Nm
ET6042 Cod.64100390
Supporto con regolazione verticale asolato con innesto quadro per EUROTEC e EUROPLUS.
Support with slot vertical regulation with clutch on square for EUROTEC and EUROPLUS.
ET6060 Cod.64100392
Supporto piatto da parete con sella quadro 10 mm per EUROTEC e EUROPLUS.
Flat wall support with 10 mm square saddle for EUROTEC and EUROPLUS
ET6030 Cod.64100393
Supporto con foro quadro 10mm a stella con 4 fori di fissaggio per EUROTEC e EUROPLUS.
Support with 10mm square star hole with 4 fixing holes for EUROTEC and EUROPLUS.
ET6038 Cod.64100391
Coppia di adattatori per tubo ottagonale Ø60mm.
Couple of adapters for Ø60mm octagonal tube.
Coppia di adattatori per tubo ottagonale Ø52mm.
Couple of adapters for Ø52mm octagonal tube.
Coppia di adattatori per tubo con ogiva Ø78mm.
Couple of adapters for Ø78mm tube with ogive.
Coppia di adattatori per tubo con ogiva Ø70mm.
Couple of adapters for Ø70mm tube with ogive.
Per maggiori informazioni sugli adattatori, si prega di contattare i nostri uffici o il nostro sito internet www.allmatic.com. For more information about the adapters, please contact our offices or our web site www.allmatic.com.
Coppia di adattatori per tubo ottagonale stellare Ø60mm.
Couple of adapters for Ø60mm octagonal star.
11
ET7815 Cod.64100452
ET7015 Cod.64100451
ET5052 Cod. 64100454
ET6025 Cod. 64100455
ET7025 Cod.64100456
ET6015 Cod. 64100457
Coppia di adattatori per tubo ottagonale Ø70mm.
Couple of adapters for Ø70mm octagonal tube.
SERIE EUROTEC / EUROPLUS - Adattatori EUROTEC / EUROPLUS SERIES - Adapters
SERIE EUROTEC / EUROPLUS - Supporti EURODRIVE / EUROPLUS SERIES - Supports
Supporto da cassonetto ad aggancio diretto per EUROTEC e EUROPLUS. Omologato fino a 30Nm
Support for shutter box with direct hook up for EUROTEC and EUROPLUS Homologated until 30Nm
ET6042 Cod.64100390
Supporto con regolazione verticale asolato con innesto quadro per EUROTEC e EUROPLUS.
Support with slot vertical regulation with clutch on square for EUROTEC and EUROPLUS.
ET6060 Cod.64100392
Supporto piatto da parete con sella quadro 10 mm per EUROTEC e EUROPLUS.
Flat wall support with 10 mm square saddle for EUROTEC and EUROPLUS
ET6030 Cod.64100393
Supporto con foro quadro 10mm a stella con 4 fori di fissaggio per EUROTEC e EUROPLUS.
Support with 10mm square star hole with 4 fixing holes for EUROTEC and EUROPLUS.
ET6038 Cod.64100391
Coppia di adattatori per tubo ottagonale Ø60mm.
Couple of adapters for Ø60mm octagonal tube.
Coppia di adattatori per tubo ottagonale Ø52mm.
Couple of adapters for Ø52mm octagonal tube.
Coppia di adattatori per tubo con ogiva Ø78mm.
Couple of adapters for Ø78mm tube with ogive.
Coppia di adattatori per tubo con ogiva Ø70mm.
Couple of adapters for Ø70mm tube with ogive.
Per maggiori informazioni sugli adattatori, si prega di contattare i nostri uffici o il nostro sito internet www.allmatic.com. For more information about the adapters, please contact our offices or our web site www.allmatic.com.
Coppia di adattatori per tubo ottagonale stellare Ø60mm.
Couple of adapters for Ø60mm octagonal star.
Recommended