View
8
Download
0
Category
Preview:
Citation preview
DTSERIES HYDRAULIC MOTORS
2DELIVERING THE POWER TO GET WORK DONE
whitedriveproducts
DT
Max. Speed Max. Flow Max. Torque Max. Pressure rpm lpm [gpm] Nm [lb-in] bar [psi]
300 300 [18.3] 320 380 95 [25] 114 [30] 819 [7250] 955 [8450] 207 [3000] 241 [3500] 259 [3750]
375 374 [22.8] 250 300 95 [25] 114 [30] 1045 [9250] 1127 [9975] 207 [3000] 224 [3250] 241 [3500]
470 464 [28.3] 200 240 95 [25] 114 [30] 1071 [9475] 1390 [12300] 172 [2500] 224 [3250] 241 [3500]
540 536 [32.7] 180 210 95 [25] 114 [30] 1277 [11300] 1525 [13500] 172 [2500] 207 [3000] 241 [3500]
750 747 [45.6] 130 150 95 [25] 114 [30] 1780 [15750] 2090 [18500] 172 [2500] 207 [3000] 241 [3500]
930 929 [56.7] 100 120 95 [25] 114 [30] 1780 [15750] 2141 [18950] 138 [2000] 172 [2500] 207 [3000]
1K1 1047 [63.9] 90 110 95 [25] 114 [30] 1915 [16950] 2316 [20500] 138 [2000] 172 [2500] 207 [3000]
1K5 1495 [91.2] 60 70 95 [25] 114 [30] 2090 [18500] 2316 [20500] 103 [1500] 121 [1750] 138 [2000]
2K1 2093 [127.7] 40 50 95 [25] 114 [30] 2661 [23550] 3342 [29580] 103 [1500] 121 [1750] 138 [2000]
CODE Displacement cc [in3/rev] cont. inter. cont. inter. cont. inter. cont. inter. peak
SpecificationS
overview
key featureS
Intermittent Ratings - 10% of operation Peak Ratings - 1% of operation
the most amazing aspect of the Dt Series motor is its huge torque potential from its relatively small size. the Dt Series motor is capable of producing output torque comparable to competitive designs, but from a package that is both shorter and lighter. the savings in space and weight in no way compromises durability, as the motor uses massive shafts, bearings and drive links to transmit the torque produced by this powerful package. the use of a case drain allows reduced pressure on the shaft seal while maintaining driv-eline lubrication for maximum motor life. Standard mounting and shaft options offer interchangeability with competitive designs. an internal drain option is also available.
Heavy-Duty Roller Bearing supports high side loads and receives forced lubrication for cooling and increased life.
Compact Housing contributes to high power-to-weight ratio of motor and offers front and rear mounting flanges.
Heavy-Duty Drive Link receives forced lubrication for long life and is capable of extreme duty cycles.
Roller Stator® Motor available in displacements up to 2093cc [127.7 cid] for high torque output.
Three-Zone Orbiting Valve precisely meters oil to produce exceptional volumetric efficiencies.
3DELIVERING THE POWER TO GET WORK DONE
whitedriveproducts
DTperformance
4
11
24
50
3
9
23
49
75
100
126
151
176
201
2
7
21
46
69
97
122
150
175
200
225
251
276
300
315
5
19
43
65
93
115
140
172
189
222
247
272
298
313
376
3
15
37
58
86
113
135
164
185
211
240
269
296
308
372
12
32
54
78
107
129
156
178
206
233
258
290
300
369
9
28
51
70
96
119
151
172
196
228
249
281
289
7
26
48
69
90
113
140
165
189
216
234
272
280
[476]
[415]
[435]
[430]
54
47
49
49
[1014]
[952]
[1057]
[1064]
[1025]
[929]
[877]
[762]
[679]
[528]
115
108
119
120
116
105
99
88
77
60
[2100]
[2256]
[2278]
[2336]
[2462]
[2222]
[2099]
[2094]
[1864]
[1845]
[1694]
[1489]
[1298]
[1086]
[958]
237
255
257
264
278
251
237
237
211
208
191
168
147
123
108
3363]
[3628]
[3616]
[3719]
[3506]
[3438]
[3342]
[3191]
[3179]
[2961]
[2835]
[2675]
[2409]
[2278]
[1642]
380
410
409
420
396
388
378
361
359
335
320
302
272
257
186
[4304]
[4801]
[4904]
[5019]
[4793]
[4857]
[4666]
[4478]
[4378]
[4402]
[4083]
[3926]
[3666]
[3482]
[2945]
486
543
554
567
542
549
527
506
495
497
461
444
414
393
333
[5942]
[6202]
[6297]
[6122]
[6081]
[5893]
[5802]
[5731]
[5592]
[5401]
[5205]
[4934]
[4857]
[4189]
671
701
712
692
687
666
656
648
632
610
588
558
549
473
[6983]
[7424]
[7554]
[7353]
[7369]
[7281]
[7121]
[6999]
[6871]
[6762]
[6570]
[6264]
[6139]
789
839
854
831
833
823
805
791
776
764
742
708
694
[7959]
[8595]
[8701]
[8621]
[8588]
[8523]
[8420]
[8213]
[8093]
[7934]
[7810]
[7535]
[7421]
899
971
983
974
970
963
951
928
914
897
883
851
839
Torque - Nm [lb-in], Speed rpm
Flo
w -
lpm
[gpm
]
17 [250] 35 [500] 69 [1000] 104 [1500] 138 [2000] 173 [2500] 207 [3000] 241 [3500]
Pressure - bars [psi] Max. Inter.
82 [729] 165 [1457] 329 [2914] 494 [4371] 659 [5828] 823 [7285] 988 [8742] 1152 [10199]
Theoretical Torque - Nm [lb-in]
Max
.In
ter.
Max
.C
ont.
300 cc [18.3 in3/rev.]
300
2 [0.5]
4 [1]
8 [2]
15 [4]
23 [6]
30 [8]
38 [10]
45 [12]
53 [14]
61 [16]
68 [18]
76 [20]
83 [22]
91 [24]
95 [25]
114 [30]
7
13
26
51
76
101
127
152
177
202
228
253
278
303
316
379
Theoretical rpm
Overall Efficiency - 70 - 100% 40 - 69% 0 - 39%
Intermittent Ratings - 10% of Operation
Displacement tested at 54°C [129°F] with an oil viscosity of 46cSt [213 SUS]
Max. Cont.
4
9
19
40
60
81
3
8
18
39
60
80
101
121
141
162
2
7
17
37
58
78
99
120
140
161
181
202
222
242
1
5
14
34
54
73
95
116
136
160
178
200
221
240
252
303
4
12
30
49
69
89
109
131
155
175
195
217
237
249
301
10
27
45
63
82
103
125
148
167
189
211
229
241
296
8
25
41
60
79
98
117
143
160
178
201
7
23
41
59
77
97
115
136
156
173
196
[574]
[583]
[596]
[627]
[570]
[467]
65
66
67
71
64
53
[1272]
[1345]
[1365]
[1400]
[1334]
[1337]
[1161]
[995]
[878]
[662]
144
152
154
158
151
151
131
112
99
75
[2670]
[2757]
[2907]
[2982]
[2969]
[2876]
[2768]
[2725]
[2508]
[2319]
[2198]
[1925]
[1676]
[1374]
302
312
329
337
336
325
313
308
283
262
248
218
189
155
[3970]
[4208]
[4388]
[4536]
[4598]
[4532]
[4439]
[4375]
[4149]
[3923]
[3779]
[3568]
[3318]
[3041]
[2839]
[2110]
449
475
496
513
520
512
502
494
469
443
427
403
375
344
321
238
[5535]
[5695]
[6020]
[6141]
[6113]
[6075]
[6059]
[5705]
[5587]
[5416]
[5161]
[4967]
[4732]
[4596]
[3820]
625
644
680
694
691
686
685
645
631
612
583
561
535
519
432
[7122]
[7596]
[7704]
[7724]
[7824]
[7626]
[7467]
[7283]
[7119]
[6886]
[6669]
[6410]
[6283]
[5503]
805
858
871
873
884
862
844
823
804
778
754
724
710
622
[8524]
[8962]
[9275]
[9304]
[9281]
[9321]
[8965]
[8930]
[8895]
[8549]
[8335]
963
1013
1048
1051
1049
1053
1013
1009
1005
966
942
[9288]
[9723]
[9867]
[9964]
[10011]
[10066]
[9877]
[9859]
[9653]
[9474]
[9171]
1050
1099
1115
1126
1131
1137
1116
1114
1091
1071
1036
Torque - Nm [lb-in], Speed rpm
Flo
w -
lpm
[gpm
]
17 [250] 35 [500] 69 [1000] 104 [1500] 138 [2000] 173 [2500] 207 [3000] 224 [3250]
Pressure - bars [psi] Max. Inter.
103 [908] 205 [1815] 410 [3631] 615 [5446] 821 [7261] 1026 [9076] 1231 [10892] 1333 [11799]
Theoretical Torque - Nm [lb-in]
Max
.In
ter.
Max
.C
ont.
374 cc [22.8 in3/rev.]
375
2 [0.5]
4 [1]
8 [2]
15 [4]
23 [6]
30 [8]
38 [10]
45 [12]
53 [14]
61 [16]
68 [18]
76 [20]
83 [22]
91 [24]
95 [25]
114 [30]
6
11
21
41
61
82
102
122
142
163
183
203
223
244
254
304
Theoretical rpm
Overall Efficiency - 70 - 100% 40 - 69% 0 - 39%
Intermittent Ratings - 10% of Operation
Displacement tested at 54°C [129°F] with an oil viscosity of 46cSt [213 SUS]
Max. Cont.
4DELIVERING THE POWER TO GET WORK DONE
whitedriveproducts
DTperformance
3
7
15
32
48
65
81
2
7
15
32
47
64
80
97
114
160
146
2
6
14
60
46
63
79
96
113
129
145
162
178
194
5
13
28
43
60
78
93
110
127
143
160
175
192
203
243
4
11
24
39
54
69
88
104
119
137
155
172
190
198
240
9
23
36
47
63
77
97
114
132
148
165
183
190
235
8
21
34
46
61
74
89
108
120
139
156
19
32
44
58
68
85
102
114
136
154
[762]
[817]
[835]
[815]
[729]
[595]
[459]
86
92
94
92
82
67
52
[1780]
[1728]
[1761]
[1784]
[1799]
[1641]
[1503]
[1354]
[1121]
[888]
[595]
201
195
199
202
203
185
170
153
127
100
67
[3553]
[3597]
[3702]
[3769]
[3744]
[3663]
[3532]
[3366]
[3173]
[2964]
[2689]
[2428]
[2003]
[1554]
401
406
418
426
423
414
399
380
359
335
304
274
226
176
[5395]
[5580]
[5717]
[5725]
[5683]
[5573]
[5422]
[5229]
[4993]
[4734]
[4458]
[4050]
[3670]
[3442]
[2451]
610
631
646
647
642
630
613
591
564
535
504
458
415
389
277
[7137]
[7365]
[7513]
[7565]
[7671]
[7584]
[7454]
[7282]
[7061]
[6772]
[6485]
[6118]
[5917]
[5589]
[4549]
806
832
849
855
867
857
842
823
798
765
733
691
669
632
514
[9226]
[9430]
[9473]
[9538]
[9531]
[9488]
[9350]
[9118]
[8875]
[8536]
[8215]
[7833]
[7676]
[6684]
1042
1066
1070
1078
1077
1072
1057
1030
1003
965
928
885
867
755
[10961]
[11256]
[11287]
[11508]
[11352]
[11523]
[11242]
[11101]
[10877]
[10592]
[10181]
1239
1272
1275
1300
1283
1302
1270
1254
1229
1197
1150
[12217]
[12083]
[12367]
[12323]
[12334]
[12318]
[12118]
[11926]
[11668]
[11200]
1381
1365
1398
1393
1394
1392
1369
1348
1318
1266
Torque - Nm [lb-in], Speed rpm
Flo
w -
lpm
[gpm
]
17 [250] 35 [500] 69 [1000] 104 [1500] 138 [2000] 173 [2500] 207 [3000] 224 [3250]
Pressure - bars [psi] Max. Inter.
127 [1127] 255 [2253] 509 [4506] 764 [6760] 1018 [9013] 1273 [1126] 1528 [13519] 1655 [14646]
Theoretical Torque - Nm [lb-in]
Max
.In
ter.
Max
.C
ont.
464 cc [28.3 in3/rev.]
470
2 [0.5]
4 [1]
8 [2]
15 [4]
23 [6]
30 [8]
38 [10]
45 [12]
53 [14]
61 [16]
68 [18]
76 [20]
83 [22]
91 [24]
95 [25]
114 [30]
5
9
17
33
49
66
82
98
115
131
147
164
180
196
205
245
Theoretical rpm
Overall Efficiency - 70 - 100% 40 - 69% 0 - 39%
Intermittent Ratings - 10% of Operation
Displacement tested at 54°C [129°F] with an oil viscosity of 46cSt [213 SUS]
Max. Cont.
2
6
13
27
42
56
70
84
2
5
12
26
41
55
69
83
97
113
127
141
1
4
11
24
39
53
68
82
95
111
125
139
155
169
176
211
3
9
21
36
49
64
76
93
108
123
137
153
166
174
210
1
5
18
30
42
57
72
87
103
116
133
148
164
169
207
4
15
27
38
49
65
80
97
107
123
136
156
163
203
13
24
34
46
57
70
84
100
114
133
[908]
[917]
[954]
[906]
[866]
[744]
[561]
[373]
103
104
108
102
98
84
63
42
[1607]
[2016]
[2043]
[2052]
[2038]
[1883]
[1727]
[1586]
[1295]
[1025]
[798]
[498]
215
228
231
232
230
213
195
179
146
116
90
56
[3722]
[4015]
[4191]
[4448]
[4404]
[4280]
[4122]
[3928]
[3722]
[3460]
[3153]
[2923]
[2464]
[2154]
[1948]
[800]
421
454
474
503
498
484
466
444
421
391
356
330
278
243
220
90
[5897]
[6231]
[6692]
[6774]
[6669]
[6519]
[6349]
[6139]
[5865]
[5563]
[5265]
[4859]
[4494]
[4299]
[3237]
666
704
756
766
754
737
717
694
663
629
595
549
508
486
366
[7730]
[8190]
[8799]
[9049]
[9130]
[8903]
[8710]
[8529]
[8230]
[7969]
[7850]
[7271]
[7024]
[6741]
[5649]
874
925
994
1023
1032
1006
984
964
930
900
887
822
794
762
638
[10201]
[10806]
[11225]
[11262]
[11374]
[11277]
[11091]
[10675]
[10550]
[10250]
[9919]
[9325]
[9075]
[8144]
1153
1221
1268
1273
1285
1274
1253
1206
1192
1158
1121
1054
1025
920
[12930]
[13219]
[13486]
[13556]
[13436]
[13381]
[13086]
[12841]
[12578]
[12283]
1461
1494
1524
1532
1518
1512
1479
1451
1421
1388
Torque - Nm [lb-in], Speed rpm
Flo
w -
lpm
[gpm
]
17 [250] 35 [500] 69 [1000] 104 [1500] 138 [2000] 173 [2500] 207 [3000]
Pressure - bars [psi] Max. Inter.
147 [1302] 294 [2604] 588 [5207] 883 [7811] 1177 [10414] 1471 [13018] 1765 [15621]
Theoretical Torque - Nm [lb-in]
Max
.In
ter.
Max
.C
ont.
536 cc [32.7 in3/rev.]
540
2 [0.5]
4 [1]
8 [2]
15 [4]
23 [6]
30 [8]
38 [10]
45 [12]
53 [14]
61 [16]
68 [18]
76 [20]
83 [22]
91 [24]
95 [25]
114 [30]
4
8
15
29
43
57
71
85
99
114
128
142
156
170
177
212
Theoretical rpm
Overall Efficiency - 70 - 100% 40 - 69% 0 - 39%
Intermittent Ratings - 10% of Operation
Displacement tested at 54°C [129°F] with an oil viscosity of 46cSt [213 SUS]
Max. Cont.
5DELIVERING THE POWER TO GET WORK DONE
whitedriveproducts
DTperformance
1
4
9
19
30
40
50
60
70
1
3
9
19
29
39
50
59
69
81
91
101
2
7
17
27
37
47
58
68
79
90
100
110
121
126
151
2
6
15
24
34
44
54
65
76
86
97
108
117
124
149
3
11
20
25
36
49
59
70
80
90
101
111
120
146
16
20
28
36
45
57
69
19
30
37
44
[1276]
[1367]
[1435]
[1400]
[1273]
[1116]
[922]
[682]
[410]
144
154
162
158
144
126
104
77
46
[2566]
[2863]
[3015]
[3080]
[2927]
[2900]
[2574]
[2382]
[2116]
[1780]
[1421]
[1058]
290
323
341
348
331
328
291
269
239
201
161
120
[5917]
[6302]
[6399]
[6317]
[6167]
[5976]
[5792]
[5545]
[5164]
[4819]
[4395]
[3926]
[3447]
[3255]
[1813]
669
712
723
714
697
675
655
627
584
545
497
444
389
368
205
[8242]
[9038]
[9578]
[9583]
[9486]
[9334]
[9136]
[8880]
[8592]
[8209]
[7635]
[7351]
[6947]
[6697]
[5428]
931
1021
1082
1083
1072
1055
1032
1003
971
928
863
831
785
757
613
[11550]
[12410]
[12678]
[12843]
[12785]
[12668]
[12451]
[11907]
[11556]
[11154]
[10737]
[10581]
[10126]
[8665]
1305
1402
1433
1451
1445
1431
1407
1345
1306
1260
1213
1196
1144
979
[15430]
[15658]
[15805]
[15801]
[15634]
[15422]
[15120]
1744
1769
1786
1786
1767
1743
1709
[18373]
[18528]
[18578]
[18271]
2076
2094
2099
2065
Torque - Nm [lb-in], Speed rpm
Flo
w -
lpm
[gpm
]
17 [250] 35 [500] 69 [1000] 104 [1500] 138 [2000] 173 [2500] 207 [3000]
Pressure - bars [psi] Max. Inter.
205 [1815] 410 [3631] 821 [7261] 1231 [10892] 1641 [14522] 2051 [18153] 2462 [21783]
Theoretical Torque - Nm [lb-in]
Max
.In
ter.
Max
.C
ont.
747 cc [45.6 in3/rev.]
750
2 [0.5]
4 [1]
8 [2]
15 [4]
23 [6]
30 [8]
38 [10]
45 [12]
53 [14]
61 [16]
68 [18]
76 [20]
83 [22]
91 [24]
95 [25]
114 [30]
3
6
11
21
31
41
51
61
71
82
92
102
112
122
127
152
Theoretical rpm
Overall Efficiency - 70 - 100% 40 - 69% 0 - 39%
Intermittent Ratings - 10% of Operation
Displacement tested at 54°C [129°F] with an oil viscosity of 46cSt [213 SUS]
Max. Cont.
1
4
8
16
24
32
40
48
57
1
3
7
16
24
31
40
47
56
64
72
81
89
1
3
7
15
24
30
39
46
55
63
72
80
88
97
101
122
1
3
7
15
24
30
38
45
54
62
70
79
87
96
100
121
3
7
15
23
29
38
44
52
61
69
78
86
94
100
120
3
6
14
22
28
36
42
50
59
67
76
83
93
97
118
5
13
20
27
34
41
49
57
65
75
83
92
96
118
11
18
24
31
36
45
54
64
72
80
89
93
116
16
22
28
33
43
50
58
67
77
86
89
17
24
32
36
46
55
63
71
82
84
[1590]
[1734]
[1816]
[1753]
[1633]
[1438]
[1109]
[807]
[310]
180
196
205
198
185
162
125
91
35
[3423]
[3696]
[3907]
[3825]
[3719]
[3576]
[3253]
[3018]
[2565]
[2118]
[1811]
[1325]
[875]
387
418
442
432
420
404
368
341
290
239
205
150
99
[5368]
[5780]
[6015]
[5878]
[5765]
[5624]
[5536]
[5111]
[4715]
[4281]
[3891]
[3616]
[2977]
[2497]
[2137]
[582]
607
653
680
664
651
636
626
578
533
484
440
409
336
282
241
66
[7089]
[7649]
[7764]
[8021]
[8034]
[7900]
[7476]
[7213]
[6772]
[6429]
[6202]
[5590]
[5139]
[4438]
[4389]
[2652]
801
864
877
906
908
893
845
815
765
726
701
632
581
501
496
300
[9447]
[9886]
[9924]
[9935]
[9800]
[9620]
[9487]
[9059]
[8488]
[8143]
[7091]
[7403]
[6778]
[6390]
[4711]
1067
1117
1121
1123
1107
1087
1072
1024
959
920
801
837
766
722
532
[11451]
[11501]
[11840]
[11991]
[11854]
[11625]
[11630]
[10974]
[10708]
[10418]
[9733]
[9342]
[9038]
[8621]
[6914]
1294
1300
1338
1355
1340
1314
1314
1240
1210
1177
1100
1056
1021
974
781
[13365]
[13769]
[13651]
[13988]
[13251]
[13492]
[13155]
[12830]
[12580]
[12135]
[11553]
[11201]
[10743]
[9235]
1510
1556
1543
1581
1497
1525
1487
1450
1422
1505
1305
1266
1214
1044
[15306]
[15873]
[15716]
[15364]
[15159]
[15287]
[15008]
[14538]
[14148]
[13816]
[13179]
[12863]
[11248]
1730
1794
1776
1736
1713
1727
1696
1643
1599
1561
1489
1454
1271
[17532]
[17570]
[17306]
[17222]
[17216]
[17039]
[16741]
[16454]
[15918]
[15505]
[15286]
1981
1985
1956
1946
1945
1925
1893
1859
1799
1752
1727
[18632]
[19054]
[18873]
[19188]
[18934]
[18625]
[18230]
[17925]
[17427]
[17309]
2105
2153
2133
2168
2140
2105
2060
2025
1969
1956
Torque - Nm [lb-in], Speed rpm
Flo
w -
lpm
[gpm
]
17 [250] 35 [500] 69 [1000]52 [750] 104 [1500] 138 [2000] 173 [2500]155 [2250]
Pressure - bars [psi] Max. Inter.
255 [2257] 510 [4514] 765 [6771] 1020 [9029] 1275 [11286] 1530 [13543] 1785 [15800] 2040 [18057] 2296 [20314] 2551 [22572]
Theoretical Torque - Nm [lb-in]
Max
.In
ter.
Max
.C
ont.
929 cc [56.7 in3/rev.]
930
2 [0.5]
4 [1]
8 [2]
15 [4]
23 [6]
30 [8]
38 [10]
45 [12]
53 [14]
61 [16]
68 [18]
76 [20]
83 [22]
91 [24]
95 [25]
114 [30]
3
5
9
17
25
33
41
49
58
66
74
82
90
98
102
123
Theoretical rpm
Overall Efficiency - 70 - 100% 40 - 69% 0 - 39%
Intermittent Ratings - 10% of Operation
Displacement tested at 54°C [129°F] with an oil viscosity of 46cSt [213 SUS]
Max. Cont.
86 [1250] 121 [1750]
6DELIVERING THE POWER TO GET WORK DONE
whitedriveproducts
DTperformance
1
3
6
14
21
28
36
43
50
1
2
6
13
21
28
36
43
50
57
65
72
79
0.9
2
6
13
20
28
35
42
49
56
65
71
79
86
90
0.6
2
5
13
19
27
34
41
49
56
64
71
78
85
90
108
2
5
11
18
26
32
40
47
55
62
70
77
84
89
107
4
10
16
23
29
37
44
52
60
69
76
83
88
106
9
14
20
26
31
40
50
59
64
74
81
85
105
12
16
26
25
33
38
52
58
67
76
82
104
9
17
22
29
30
41
57
62
71
76
19
25
29
33
45
51
61
71
[1918]
[1821]
[1985]
[1980]
[1500]
[1451]
[1143]
[871]
[390]
217
206
224
224
170
164
129
98
44
[4026]
[4410]
[4407]
[4180]
[4314]
[3814]
[3546]
[3176]
[2761]
[2220]
[1678]
[1033]
[444]
455
498
498
472
487
431
401
359
312
251
190
117
50
[5940]
[6251]
[6672]
[6669]
[6538]
[6270]
[5975]
[5526]
[5129]
[4569]
[4053]
[3453]
[2741]
[1862]
[1635]
671
706
754
754
739
709
675
624
580
516
458
390
310
210
185
[7879]
[8273]
[8700]
[8946]
[9023]
[8580]
[8356]
[7915]
[7535]
[6871]
[6252]
[5774]
[5034]
[4346]
[4096]
[1789]
890
935
983
1011
1020
970
944
894
851
776
706
652
569
491
463
202
[10518]
[10810]
[11169]
[10956]
[10986]
[10688]
[10163]
[9933]
[9402]
[8869]
[8227]
[7493]
[6677]
[6281]
[4217]
1189
1222
1262
1238
1241
1208
1148
1122
1062
1002
930
847
755
710
477
[12635]
[13147]
[13286]
[13106]
[12879]
[12569]
[12237]
[11678]
[11252]
[10502]
[9846]
[9007]
[8519]
[6460]
1428
1486
1501
1481
1455
1420
1383
1320
1272
1187
1113
1018
963
730
[15014]
[14998]
[15280]
[15168]
[14981]
[14263]
[14045]
[13738]
[12874]
[12214]
[11398]
[10901]
[8962]
1697
1695
1727
1714
1693
1612
1587
1552
1596
1380
1288
1232
1013
[16936]
[17185]
[16982]
[16756]
[16424]
[16261]
[15877]
[15246]
[14599]
[13777]
[13247]
[10947]
1914
1942
1919
1893
1856
1837
1794
1723
1650
1557
1497
1237
[18971]
[18983]
[18879]
[18569]
[18426]
[18147]
[17705]
[17055]
[16164]
[15844]
2144
2145
2133
2098
2082
2051
2001
1927
1827
1790
[20456]
[20596]
[20275]
[20130]
[19716]
[18924]
[18591]
[17950]
2311
2327
2291
2275
2228
2138
2101
2028
Torque - Nm [lb-in], Speed rpm
Flo
w -
lpm
[gpm
]
17 [250] 35 [500] 69 [1000]52 [750] 104 [1500] 138 [2000] 173 [2500]155 [2250]
Pressure - bars [psi] Max. Inter.
287 [2544] 575 [5088] 862 [7631] 1150 [10175] 1437 [12719] 1725 [15263] 2012 [17807] 2300 [20350] 2587 [22894] 2874 [25438]
Theoretical Torque - Nm [lb-in]
Max
.In
ter.
Max
.C
ont.
1047 cc [63.9 in3/rev.]
1k1
2 [0.5]
4 [1]
8 [2]
15 [4]
23 [6]
30 [8]
38 [10]
45 [12]
53 [14]
61 [16]
68 [18]
76 [20]
83 [22]
91 [24]
95 [25]
114 [30]
2
4
8
15
22
29
37
44
51
58
66
73
80
87
91
109
Theoretical rpm
Overall Efficiency - 70 - 100% 40 - 69% 0 - 39%
Intermittent Ratings - 10% of Operation
Displacement tested at 54°C [129°F] with an oil viscosity of 46cSt [213 SUS]
Max. Cont.
86 [1250] 121 [1750]
0.9
2
4
9
15
20
25
30
36
0.6
1
4
9
14
19
24
29
35
40
45
50
55
1
3
8
13
18
23
28
33
39
44
49
54
60
63
3
7
12
17
22
27
32
37
43
48
53
60
62
75
7
10
15
19
24
30
36
40
47
52
58
62
74
9
14
19
24
32
38
44
48
58
59
73
14
15
21
27
37
46
50
53
[2703]
[2978]
[3106]
[2925]
[2629]
[2183]
[1740]
[1157]
[594]
305
336
351
331
297
247
197
131
67
[5736]
[6128]
[6454]
[6304]
[3023]
[5662]
[5159]
[4695]
[4282]
[3457]
[2602]
[1607]
[770]
648
693
729
712
681
640
583
531
484
391
294
182
87
[8942]
[9597]
[9879]
[9632]
[9188]
[8860]
[8315]
[7689]
[6805]
[6072]
[5435]
[4310]
[4032]
[2589]
1011
1085
1116
1088
1038
1001
940
869
769
686
614
487
456
293
[12072]
[13191]
[12952]
[12655]
[12189]
[11770]
[11217]
[10374]
[9523]
[8746]
[7720]
[6632]
[6232]
[2174]
1364
1491
1464
1430
1377
1330
1267
1172
1076
988
872
749
704
246
[15668]
[15662]
[15864]
[15479]
[15066]
[14532]
[13866]
[13177]
[12320]
[11356]
[10143]
[9313]
[5711]
1771
1770
1793
1749
1702
1642
1567
1489
1392
1283
1146
1052
645
[18786]
[18498]
[18059]
[17612]
[16941]
[16334]
[15429]
[14442]
[13570]
[12961]
[9265]
2123
2090
2041
1990
1914
1846
1743
1632
1533
1465
1047
[20613]
[20353]
[19986]
[19366]
[18553]
[17883]
[16568]
[16306]
2329
2300
2258
2188
2301
2021
1872
1843
Torque - Nm [lb-in], Speed rpm
Flo
w -
lpm
[gpm
]
17 [250] 35 [500] 52 [750] 69 [1000] 86 [1250] 104 [1500] 121 [1750]
Pressure - bars [psi] Max. Inter.
410 [3631] 821 [7261] 1231 [10892] 1641 [14522] 2051 [18153] 2462 [21783] 2872 [25414]
Theoretical Torque - Nm [lb-in]
Max
.In
ter.
Max
.C
ont.
1495 cc [91.2 in3/rev.]
1k5
2 [0.5]
4 [1]
8 [2]
15 [4]
23 [6]
30 [8]
38 [10]
45 [12]
53 [14]
61 [16]
68 [18]
76 [20]
83 [22]
91 [24]
95 [25]
114 [30]
2
3
6
11
16
21
26
31
36
41
46
51
56
61
64
76
Theoretical rpm
Overall Efficiency - 70 - 100% 40 - 69% 0 - 39%
Intermittent Ratings - 10% of Operation
Displacement tested at 54°C [129°F] with an oil viscosity of 46cSt [213 SUS]
Max. Cont.
7DELIVERING THE POWER TO GET WORK DONE
whitedriveproducts
DTperformance
0.8
1
3
7
10
14
17
21
25
0.8
1
3
7
10
14
17
21
24
28
32
36
39
1
3
6
10
14
16
21
24
28
32
36
39
43
45
6
9
13
16
20
23
27
31
36
39
43
45
54
9
13
17
21
26
30
35
38
42
45
54
8
9
12
13
20
26
30
36
40
43
53
[3878]
[3891]
[4073]
[3920]
[3560]
[2985]
[2431]
[1535]
[587]
438
440
460
443
402
337
275
173
66
[7894]
[8162]
[8458]
[8525]
[8179]
[7824]
[7205]
[6398]
[5479]
[4391]
[3257]
[1991]
[628]
892
922
956
963
924
884
814
723
619
496
368
225
71
[12375]
[12923]
[13192]
[13012]
[12613]
[11944]
[11171]
[10221]
[9009]
[8052]
[6686]
[5507]
[3794]
[3129]
1398
1460
1491
1470
1425
1350
1262
1155
1018
910
755
622
429
354
[17520]
[17370]
[16995]
[16538]
[15886]
[15063]
[14046]
[12973]
[11537]
[10367]
[8704]
[7883]
[3803]
1980
1963
1920
1869
1795
1702
1587
1466
1304
1171
984
891
430
[21152]
[20733]
[20232]
[19519]
[18645]
[17527]
[16449]
[14885]
[13665]
[12636]
[8485]
2390
2343
2286
2206
2107
1980
1859
1682
1544
1428
959
[23613]
[23564]
[23588]
[23333]
[22777]
[21866]
[20878]
[19575]
[18291]
[17445]
[13207]
2668
2663
2665
2637
2574
2471
2359
2212
2067
1971
1492
Torque - Nm [lb-in], Speed rpm
Flo
w -
lpm
[gpm
]
17 [250] 35 [500] 52 [750] 69 [1000] 86 [1250] 104 [1500] 121 [1750]
Pressure - bars [psi] Max. Inter.
574 [5084] 1149 [10167] 1723 [15251] 2298 [20334] 2872 [25418] 3447 [30502] 4021 [35585]
Theoretical Torque - Nm [lb-in]
Max
.In
ter.
Max
.C
ont.
2093 cc [127.7 in3/rev.]
2k1
2 [0.5]
4 [1]
8 [2]
15 [4]
23 [6]
30 [8]
38 [10]
45 [12]
53 [14]
61 [16]
68 [18]
76 [20]
83 [22]
91 [24]
95 [25]
114 [30]
1
2
4
8
11
15
19
22
26
29
33
37
40
44
46
55
Theoretical rpm
Overall Efficiency - 70 - 100% 40 - 69% 0 - 39%
Intermittent Ratings - 10% of Operation
Displacement tested at 54°C [129°F] with an oil viscosity of 46cSt [213 SUS]
Max. Cont.
8DELIVERING THE POWER TO GET WORK DONE
whitedriveproducts
DTBearing Curve: the bearing curve represents allowable bearing loads based on iSo 281 bearing capacity for an L10 life of 2,000 hours at 100 rpm. radial loads for speeds other than 100 rpm may be calculated using the multiplication factor table located below.
NOTE:Dt motor weights vary ± 1,4 kg [3 lb] depending upon motor configuration. Subtract 3 [.11] from dimension AG for motors using the 1,2 or 5 endcover.
LENGTH / WEIGHT CHARTStandard Mount - Dimension AG
Code mm [in] kg [lb] 300 209 [8.25] 20,2 [44.6] 375 216 [8.50] 20,8 [45.8] 470 223 [8.80] 21,4 [47.1] 540 230 [9.04] 21,9 [48.2] 750 248 [9.75] 23,3 [51.3] 930 263 [10.35] 24,4 [53.8] 1K1 273 [10.75] 25,3 [55.7] 1K5 311 [12.25] 28,3 [62.5] 2K1 362 [14.25] 32,3 [71.3]
700 SerieS houSinGS
C2C8E2E8
NOTE: *Dimension for the c2 & c8 is 127,0 [5.00] - 127,7 [4.99]. *Dimension for the e2 & e8 is 124,9 [4.92] - 124,5 [4.90].
149 [5.85] max.
Ø 161,9 [6.375]
149 [5.85] max.
137 [5.38]
127,0 [4.999]126,8 [4.994]
13,3 [.524]13,1 [.514]
101 [3.97]
6,9 [.270]6,5 [.255]
22 [.88] min.
16,8 [.663]16,5 [.649]
2,7 [.105]2,4 [.095]
137 [5.38]
Ø 152,4 [6.00]
AG
*[see reference below]
22 [.88] min.
12,000
11,000
10,000
9,000
8,000
7,000
6,000
5,000
4,000
3,000
2,000
1,000lb
5,000
4,500
4,000
3,500
3,000
2,500
2,000
1,500
1,000
500 dan-4 -3 -2 -1 0 1 2 3 4 5 6 in.
-100 -75 -50 -25 0 25 50 75 100 125 150 mm
Bearing
Shaft
890 dan [2000 lbs]
445 dan [1000 lbs]
Standard mount 5” pilot end ports
Standard mount 5” pilot Side ports
Standard mount 125mm pilot end ports
Standard mount 125mm pilot Side ports
BEARING LOAD MULTIPLICATION FACTOR TABLE
RPM FACTOR RPM FACTOR 50 1.23 500 0.62 100 1.00 600 0.58 200 0.81 700 0.56 300 0.72 800 0.50 400 0.66
NOTE: Dimensions shown are without paint. paint thickness can be up to 0,13 [.005]
9DELIVERING THE POWER TO GET WORK DONE
whitedriveproducts
DT700 SerieS ShaftS
8 [.31]
58 [2.29]*77 [3.02]
38,9 [1.530]37,6 [1.480]
19 [.75] min.
38,1 [1.500]38,1 [1.499]
3/8”-16 unc
42,4 [1.671]42,1 [1.658]
10,0 [.376]10,0 [.375] 11,2 [.439]
11,1 [.438]
1/2” Lock washer
62,7 [2.470]62,4 [2.456]
12,7 [.501]12,7 [.500] 18 [.72]
24 [.94] min.
57,2 [2.250]57,1 [2.249]
1/2”-20 unf
*113 [4.46]
98 [3.84]57,7 [2.270]56,4 [2.220]
12,0 [.471]11,9 [.470]
8,0 [.315]8,0 [.313]
43,0 [1.693]42,6 [1.677]
40,0 [1.576]40,0 [1.575]
m12 x 1.25
80 [3.13]
11 [.42]
57,7 [2.27]56,4 [2.22]
24 [.94] min.
m12 x 1.25
14,0 [.552]14,0 [.551]
9,0 [.353]8,9 [.352]
53,2 [2.093]52,8 [2.080]
25 [.98]
12 [.47]
50,0 [1.969]50,0 [1.968]
30°
56,6 [2.230]55,4 [2.180]
*122 [4.80]
79 [3.11]mounting flange
mounting flange
mounting flange
mounting flange
10,0 [.376]10,0 [.375]
11,2 [.439]11,1 [.438]
1/2” Lock washer
62,7 [2.470]62,4 [2.456]
12,7 [.501]12,7 [.500]
24 [.94] min.
57,2 [2.250]57,1 [2.249]
1/2”-20 unf
*113 [4.46]
98 [3.84]
57,7 [2.270]56,4 [2.220]
mounting flange
113 [4.45]
30 1-1/2” Straight
Max. Torque: 2230 Nm [19800 lb-in]
40 2-1/4” Straight
Max. Torque: 2700 Nm [24000 lb-in]
NOTE: *Shaft lengths vary ± 0,8 [.030]. †for speed sensor motors only.
41 50mm Straight
Max. Torque: 2700 Nm [24000 lb-in]
†47 2-1/4” Straight with Modified Keyway
Max. Torque: 2700 Nm [24000 lb-in]
36 40mm Straight
Max. Torque: 2700 Nm [24000 lb-in]
†54 40mm Straight extended
10DELIVERING THE POWER TO GET WORK DONE
whitedriveproducts
DT700 SerieS ShaftS
4 [.17]
5 [.20]
19 [.75] 45 [1.78]
78 [3.09]
*113 [4.45]
31,8 [1.250]30,5 [1.200]
1:8 taper
1-1/8”-18 unef
38,1 [1.500]38,0 [1.498]
8,0 [.314]8,0 [.313] 7,0 [.276]
7,0 [.274]
4 [.15]
75 [2.97]
*91 [3.57]
53,5 [2.106]53,4 [2.104]
24 [.94]
56 [2.20]
1/2”-20 unf
19 [.75] min.
19 [.74] min.
31,7 [1.249]31,6 [1.245]
3/8”-16 unc
46 [1.81]
41 [1.60]
16,0 [.631]15,9 [.629] 10,0 [.395]
9,9 [.391]
*120 [4.73]
70 [2.75]35 [1.37]
7 [.29]
8 [.32]
60,0 [2.35]
m42 x 31:10 taper
38,9 [1.530]37,6 [1.480]
3/8”-16 unc
38,1 [1.500]38,0 [1.496]
*68 [2.69]
**58 [2.30]
mounting flange
mounting flange
mounting flange
14 tooth 12/24 pitchStd. anSi B92.1-1996 Spline
mounting flange
17 tooth 12/24 pitchSae Std. Spline
mounting flange
16 tooth 8/16 pitchStd. anSi B92.1-1996 Spline -
Deviates from Standard
**34 [1.35]
56 [2.19]
31 1-1/2” tapered
Max. Torque: 2250 Nm [19900 lb-in]
NOTE: a slotted nut is standard on all tapered shafts. *Shaft lengths vary ± 0,8 [.030]. †for speed sensor motors only.
23 14 tooth Spline
Max. Torque: 2070 Nm [18400 lb-in]
†09 14 tooth Spline extended
42 16 tooth Spline
Max. Torque: 2700 Nm [24000 lb-in]
†48 16 tooth Spline extended
33 17 tooth Spline
Max. Torque: 2250 Nm [19900 lb-in]
†49 17 tooth Spline extended
45 60mm tapered
Max. Torque: 2700 Nm [24000 lb-in]
NOTE: **for the 49 shaft add 9,7mm [.38 in] to dimension.
11DELIVERING THE POWER TO GET WORK DONE
whitedriveproducts
DT700 SerieS portinG optionS
Auxillary View Q - Case Drain
Auxillary View V - Valve Cavity
30 [1.20]
Q
V
12°
25°
Q
23 [.91]
36 [1.43]
Q
Q
116 [4.55]
130 [5.10]
130 [5.10]
23 [.90]
13°
13°
69 [2.73]
69 [2.73]
C
E
C
C
E
D
126 [4.97]
Q
28 [1.10]
25°
38°
25°
25°
V
Q
12°
25°
25°
25°
25°
D
38.5° 38.5°C
E
38.5°
23 [.90]
A
B
A
B
A
B
A
B
A
B
116 [4.55]
A
B
A
B
Q
E
38.5°
A
B
V V
Q
NOTE: A- pressure port B- pressure port C- case Drain D- 10 Series/2-way valve cavity (7/8”-14 unf-2B) E- internal Drain
SiDe portS
5 1-1/16” o-ring with 7/16” Drain2 3/4” BSp.f with 1/4” Drain
7 3/4” BSp.f with 1/4” Drain6 1-1/16” o-ring with 7/16” Drain
NOTE: Shown with standard case drain. NOTE: Shown with internal drain option.
NOTE: Shown with standard case drain & valve cavity. NOTE: Shown with internal drain & valve cavity.
NOTE: Shown with standard case drain. NOTE: Shown with internal drain option.
NOTE: Shown with standard case drain & valve cavity. NOTE: Shown with internal drain & valve cavity.
12DELIVERING THE POWER TO GET WORK DONE
whitedriveproducts
DT700 SerieS portinG optionS
Q - Case Drain
V - Valve Cavity
23 [.90]
28 [1.10]
V
10 [.39]
37 [1.46]
11 [.44]
C
E
D
126 [4.97]
Q
3 [.13]
38.5°7 [.26]
23 [.90]
V
Q
12°D
38.5°
C
E
10 [.39]
37 [1.46]
11 [.44]
23 [.90]
10 [.39]
37 [1.46]
11 [.44]
3 [.13]
7 [.26]23 [.90]
12°
10 [.39]
37 [1.46]
11 [.44]
23 [.90]
A
B
A
B
A
B
A
B
E
A
B
Q38.5°
23 [.90]
23 [.90]
30 [1.20]
64 [2.50]
28,6 [1.125]
5/16 - 18 UNC12,7 [.500] Min. Deep
SiDe portS
1 7/8” o-ring with 7/16” Drain
3 manifold with 7/16” Drain
NOTE: A- pressure port B- pressure port C- case Drain D- 10 Series/2-way valve cavity (7/8”-14 unf-2B) E- internal Drain
NOTE: Shown with standard case drain. NOTE: Shown with internal drain option.
NOTE: Shown with standard case drain & valve cavity. NOTE: Shown with internal drain & valve cavity.
NOTE: the 3 endcover is only available with the internal drain option..
enD portS
13DELIVERING THE POWER TO GET WORK DONE
whitedriveproducts
DT700 SerieS moDeL coDe BuiLDer
SERIES DISPLACEMENT HOUSING SHAFT PAINT CAVITY ADD ON MISCELLANEOUS
STEP 1 STEP 2 STEP 3 STEP 4 STEP 5 STEP 6 STEP 7 STEP 8
STEP 1 - Select a series
STEP 2 - Select a displacement option
DT Series Motor700
C2C8E2E8
STEP 3 - Select a mounting option
Standard Mount 5” Pilot End Ports (S)Standard Mount 5” Pilot Side Ports (S)Standard Mount 125mm Pilot End Ports (S)Standard Mount 125mm Pilot Side Ports (S)
STEP 6 - Select a valve cavity option
STEP 5 - Select a paint option
BlackBlack (unpainted flange face)No Paint
ABZ
STEP 8 - Select a miscellaneous option
NoneInternal DrainFreeturning RotorInternal Drain with Freeturning Rotor
AAABACAD
300 cc [18.3 in3/rev]374 cc [22.8 in3/rev]464 cc [28.3 in3/rev]536 cc [32.7 in3/rev]747 cc [45.6 in3/rev]
300375470540750
929 cc [56.7 in3/rev]1047 cc [63.9 in3/rev]1495 cc [91.2 in3/rev]2093 cc [127.7 in3/rev]
9301K11K52K1
STEP 4 - Select a shaft option
1-1/2” Straight1-1/2” Tapered2-1/4” Straight40mm Straight14 Tooth Spline16 Tooth Spline17 Tooth Spline
30314036234233
NoneRelief Valve Cavity69 Bar [1000 psi] Relief Valve Installed86 Bar [1250 psi] Relief Valve Installed104 Bar [1500 psi] Relief Valve Installed121 Bar [1750 psi] Relief Valve Installed138 Bar [2000 psi] Relief Valve Installed173 Bar [2500 psi] Relief Valve Installed207 Bar [3000 psi] Relief Valve Installed
ABCDEFGJL
STEP 7 - Select an add on option
StandardLock NutSolid Hex Nut4-Pin Dual Male Weatherpack Connector (S)4-Pin M12 Dual Male Connector (S)3-Pin Single Male Weatherpack Connector (S)4-Pin M12 Single Male Connector (S)
ABCWXYZ
NOTE: Valve cavity option is not available on porting option 3.
NOTE: (S) - STEP 3 Mountings available for use with speed sensors. STEP 4 Shafts available for use with speed sensors. STEP 7 Speed sensor options.
NOTE: To complete the three (3) digit DT Series housing code a two (2) digit mounting option must be followed with the single (1) digit porting option found in STEP 3 part II. Side port mounting options need side port porting options and end port mounting options need end port porting options.
STEP 3 (part II) - Select a porting option
7/8” O-Ring With 7/16” Drain1
END PORTS
SIDE PORTS
23567
3/4” BSP.F With 1/4” Drain (Radial Ports)Manifold With 7/16” Drian (Parallel Ports)1-1/16” O-Ring With 7/16” Drain (Radial Ports)1-1/16” O-Ring With 7/16” Drain (Parallel Ports)3/4” BSP.F With 1/4” Drain (Parallel Ports)
50mm Straight60mm Tapered2-1/4” Straight Modified (S)40mm Straight Extended (S)14 Tooth Spline Extended (S)16 Tooth Spline Extended (S)17 Tooth Spline Extended (S)
41454754094849
A B A B NOTE: DT Series motors do not have internal components that allow the motor to turn in either direction. Refer to the diagram to the left to determine which way the motor will turn when either port A or port B is pressurized.
Recommended