Sigma reader with Secure Admin - service.morphotrak.com Sigma and... · Tool Box, write USB script...

Using Sigma and Sigma Lite readers with Secure Admin

Index• Requirements • Sigma to L1 Legacy• Sigma Lite to L1 Legacy• Working with Secure Admin• Scenario One• Scenario Two• Scenario Three• Copy Templates from Database to Sigma/Sigma

Lite reader• Using Sigma Iclass and settings• Wiegand output with Sigma• Questions and Answers

The scenario is you have older 2G or/and 3G, or/and 4G or/and

readers in Secure Admin

Index

Now you want to add a Sigma or Sigma Lite reader to Secure

Admin

Index

RequirementsSecure Admin Software 4.1.2X.X.X or higherMorpho Tool Box 3.X.X**MSO does require a Verif Licenses*MSO 300/350/1300MSO might be needed depending on Template type, explained later on this document

Index

Sigma to L1 Legacy

Index

• Access Path>Click on the Lock

• Default password 12345

Sigma to L1 Legacy

Index

• Access Path>Click System Menu

Sigma to L1 Legacy

Index

• Access Path> First Boot Assistant > Protocol Configuration

• Once you make the change click on the check Mark

• Once the protocol selected is saved. The terminal will be required to reboot to make the change in legacy modes. When one protocol is switched to another, MorphoAccess® SIGMA Series terminal will erase entire configuration and user database; except communication links and language settings.

Sigma to L1 Legacy

Index

Sigma Lite to L1 Legacy

Index

Equipment needed

• USB to Micro-USB Cable straight through

• Flash drive from 4 GB to 16 GB on USB 2.0

• SIGMA Lite will only read/write to USB drives formatted in FAT or FAT32

• POE Power or separate power

• *POE=Power over Ethernet

Index

Morpho Tool Box

• Morpho Tool Box 3.X.X and Higher

• Download it from http://service.morphotrak.com/software-links.html

• Unzip it and install on your PC

•Index

Launch Morpho Tool Box

• Open up Morpho Tool box and click on third Icon from top to bottom

Index

Tool Box, L1 Legacy configuration

• In Morpho Tool box and click on Change protocol configuration

Index

L1 Legacy Tool Box, configuration

• Changing the Sigma Lite to L1 Legacy mode can only be used with Secure Admin Software**

• **Recommended to use Secure Admin 4.1.20.0.1

Index

Tool Box, write USB script

• Once you have set your configuration click on write to USB script

Index

Tool Box, write USB script

• Browse to your Flash drive to write the script

Index

Add configuration to Sigma Lite• Separated plug from the USB port and plug in Micro USB to

Female USB adaptor with Flash drive

Index

Example Picture

• With power to the Sigma Lite reader , when plug in Flash drive reader should flash and turn green and reboot.

Index

Need to set up a Sigma Lite reader with an IP address ?

Please visit http://service.morphotrak.com/support.html

Read the PDF How set an IP address on a Sigma LIte

Index

Working with Secure Admin

Index

Now you have changed the Sigma or Sigma Lite reader to L1 Legacy mode

Registering reader in Secure Admin

Index

• Please use Secure Admin 4.1.2X.X.X or higher Download it from

• http://service.morphotrak.com/software-links.html

Secure Admin Software

Index

Registering reader in Secure Admin via Client if using Static IP

Index

Registering reader in Secure Admin via Client if using Static IP

In Secure Admin go to>Network>Register via Client if your using Static IP

Index

Registering reader in Secure Admin via Client

Register Via Client put in the IP address and click next and follow the wizard to the end

Index

Registering reader in Secure Admin via Client

Click OK to finish the registration

Index

Registering reader in Secure Admin via Server if using DHCP

Index

Registering reader in Secure Admin via Server if using DHCP

In Secure Admin go to>Network>Register via Server if your using DHCP

Index

Registering reader in Secure Admin via Server if using DHCP

Click on Search Automatically the reader will appear with a plus sign

Index

Registering reader in Secure Admin via Server if using DHCP

Click next and follow the wizard to the end

Index

**Please Read**

If you had only Sigma Series readers in L1 Legacy mode and using Secure Admin

You would need a MSO for enrollment• **MSO is a finger capturing device• **MSO does require a Verif Licenses

Index

**Please Read**

If you Sigma Series readers in L1 Legacy mode and 2G/3G/4G readers using Secure Admin

You would need a MSO for enrollment• **MSO is a finger capturing device• **MSO does require a Verif Licenses• **MSO is not needed if using a 4G reader for enrollment and using

a TEM, BUR or VUR template***• If not using any of this template type a MSO is required.

Index

Scenario One

• You are using Sigma Series readers in L1 Legacy mode and 2G/3G/4G readers using Secure Admin

• You are currently using BUR, TEM or VUR templates

• No MSO

Index

Scenario One

• Use 4G Fingerprint for enrollment • Do your basic enrollment

Index

Scenario One• Fill in your information

Index

Scenario One• Save to your devices 4G/ Sigma/ Sigma lite reader

Index

Scenario Two

• You are using Sigma Series readers in L1 Legacy mode and 2G/3G/4G readers using Secure Admin

• You are currently using TMS, MTM, templates

• Using MSO

Index

Scenario Two

• Use MSO + 4G Fingerprint for enrollment • Do your basic enrollment • Scenario two makes you to capture the same finger on the MSO

and the 4G reader

Index

Scenario Two

• Enroll using the MSO

Index

Scenario Two• Now do a second capture same finger using the 4G reader

Index

Scenario Two• Fill in your information

Index

Scenario Two• Save to your devices 4G/ Sigma/ Sigma lite reader

Index

Scenario Three

• You are only using Sigma Series readers in L1 Legacy mode and with no other type of devices

• Using MSO

Index

Scenario Three

• Go to Tools>options

Index

Scenario Three

• Check the box that says Skip finger capture on L1 Legacy Device during MSO Enrollment and hit Apply

Index

Scenario Three

• Enrollment• Use MSO + 4G Fingerprint for enrollment

Index

Scenario Three

• Enroll using the MSO

Index

Scenario Three• Current device would be one of the Sigma/Sigma Lite readers

Index

Scenario Three• Fill in your information

Index

Scenario Three• Save to your Sigma/ Sigma lite reader

Index

Copy Templates from Database to Sigma/Sigma Lite reader

• This next few steps is with a existing Database of either BUR, TEM or VUR templates.

Index

Copy Templates from Database to Sigma/Sigma Lite reader

• Go to Templates>expand the device network>group where you will see your reader(s)

Index

Copy Templates from Database to Sigma/Sigma Lite reader

• Double click on Database

Index

Copy Templates from Database to Sigma/Sigma Lite reader

• Click on the check box Select All

Index

Copy Templates from Database to Sigma/Sigma Lite reader

• Right click and copy

Index

Copy Templates from Database to Sigma/Sigma Lite reader

• Click on the Sigma reader and right click and Paste

Index

Copy Templates from Database to Sigma/Sigma Lite reader

• Follow the prompt

Index

Using Sigma Iclass with Secure Admin

• Using Sigma Iclass readers with Iclass cards readers settings

Index

Using Sigma Iclass with Secure Admin

Go to Smart Card>smart card device Manager

Index

Using Sigma Iclass with Secure Admin

The Current device is the Sigma device

Index

Using Sigma Iclass with Secure Admin

Click on Security Settings and Smart Card Security Settings box opens

Index

Using Sigma Iclass with Secure Admin

By Default ESI Site Key Encryption is unchecked, only check this box if the other readers using ESI Site Key Encryption

Index

Using Sigma Iclass with Secure Admin

After you check off that box click save settings

Index

Using Sigma Iclass with Secure AdminADDING A EXISTING SITE KEY**This step is if you already have a Site Key created

Index

Using Sigma Iclass with Secure AdminPath>Smart Card Device Manager>Security Settings

Index

Using Sigma Iclass with Secure Admin

Click on Change Site Key

Index

Using Sigma Iclass with Secure Admin

Click on the box with 3 dots and browse for your Site key file

Index

Using Sigma Iclass with Secure Admin

Once you found your existing and Site key and added it click save settings

Index

Wiegand output with Sigma• Steps to send out wiegand using Sigma /Sigma Lite in L1 Legacy mode

Index

Wiegand output with Sigma

In Secure Admin go to Device Settings>expand the device network>group where you will see your reader(s)

Index

Wiegand output with Sigma

Click on the Wiegand tab

Index

Wiegand output with SigmaClick on the Wiegand Output Settings and a box will open up

Index

Wiegand output with SigmaPick on the Verification Pass and or Identification Pass your weigand value and hit Apply

Index***Do not use the same wiegand value for Verification Fail and or Identification Fail and should be left to None

Wiegand output with SigmaHit Apply one Last time

Index

Questions and Answers• Can I use a Sigma series reader for enrollment like a 4G reader?• Unfortunately that is not possible

• Can I transfer a TMS , MTM templates to a Sigma ?• No only TEM, BUR, VUR can be transferred to the Sigma series

• The template type says N/A General tab of Secure Admin why?• The Sigma series only use a PK-Lite templates which is not listed under this tab

• If the reader uses Pk-Lite templates why can I transfer TEM, BUR, VUR ?• The software basically makes a copy of those template and converts them to a PK-

Lite template.

• Why do I need to use Secure Admin 4.1.20?• This version of software is built to see the Sigma series product line

• Can I communicate to the Sigma series reader using a USB cable?• The Sigma Series reader can communicate via IP or 485 in Secure Admin

• I get a missing License error when I try to enroll with a MSO in Secure Admin• The MSO requires a Verif license to work with Secure Admin, this license needs to

be purchased and added to the MSO

Index

Website

• Please visit Service@morphotrak.com for software, firmware, videos and PDF’s.

Index